-- Copyright (C) 2008-2014 Super Micro Computer Inc. All Rights Reserved

-- /*****************************************************************
--  *                                                               *
--  * $Id: fsmisos3.mib,v 1.4 2012/09/07 09:52:05 siva Exp $        *
--  * fsmisos3.mib                                                  *
--  *                                                               *
--  * OSPFv3 Proprietary MIB.                               *
--  *                                                               *
--  ****************************************************************/

SUPERMICRO-MISTDOSPFV3-MIB DEFINITIONS ::= BEGIN 

   IMPORTS 
        MODULE-IDENTITY, OBJECT-TYPE, Counter32, 
        Gauge32, Integer32, IpAddress, enterprises, Unsigned32 
                FROM SNMPv2-SMI 
        TruthValue, StorageType, RowStatus, TEXTUAL-CONVENTION
                FROM SNMPv2-TC 
        InterfaceIndex 
                FROM IF-MIB 
        InetAddressType, InetAddress, InetAddressPrefixLength 
                FROM INET-ADDRESS-MIB 
        AreaID, RouterID, Metric, BigMetric, Status,  
        HelloRange, DesignatedRouterPriority 
                FROM OSPF-MIB;

fsMIStdOspfv3 MODULE-IDENTITY 
        LAST-UPDATED "201209050000Z" 
        ORGANIZATION "Super Micro Computer Inc." 
        CONTACT-INFO "support@Supermicro.com" 
        DESCRIPTION
            "The Proprietary MI STD OSPF3 MIB modified 
	    from STD OSPF3 MIB"
	REVISION "201209050000Z"
        DESCRIPTION
            "The Proprietary MI STD OSPF3 MIB modified 
	    from STD OSPF3 MIB"

         ::= { enterprises supermicro-computer-inc(10876) super-switch(101) basic(2) 23 }

    -- Texual conventions 

    UpToRefreshInterval ::= TEXTUAL-CONVENTION 
             DISPLAY-HINT "d"
             STATUS        current 
             DESCRIPTION 
                "The values one might be able to configure for                  
                variables bounded by the Refresh Interval" 
             SYNTAX        Integer32 (1..1800) 
 
    RouterDeadRange ::= TEXTUAL-CONVENTION 
             DISPLAY-HINT "d"
             STATUS        current 
             DESCRIPTION 
                "The range of intervals in seconds that a routers hello 
                must have not been seen before a neighbor declares the 
                router down" 
             SYNTAX        Integer32 (1..'FFFF'h) 

    -------------------

-- Top-level structure of MIB 
fsMIStdOspfv3Objects        OBJECT IDENTIFIER ::= { fsMIStdOspfv3 1 } 

--      OSPF Table
--      contains information regarding various instances
--      of the router

    fsMIStdOspfv3Table OBJECT-TYPE
        SYNTAX SEQUENCE OF FsMIStdOspfv3Entry
	    MAX-ACCESS   not-accessible
	    STATUS   current
	    DESCRIPTION
	        "Information describing the parameters
	         of router's instances"
      ::= { fsMIStdOspfv3Objects 1 }

    fsMIStdOspfv3Entry OBJECT-TYPE
        SYNTAX FsMIStdOspfv3Entry
	    MAX-ACCESS   not-accessible
	    STATUS   current
	    DESCRIPTION
	        "Information describing the parameters
	        of one of the router's instances"
	    INDEX { fsMIStdOspfv3ContextId }
      ::= { fsMIStdOspfv3Table 1 }

FsMIStdOspfv3Entry ::=
    SEQUENCE {
    fsMIStdOspfv3ContextId
	    Integer32,
	fsMIStdOspfv3RouterId
	    RouterID,
	fsMIStdOspfv3AdminStat
	    Status,
	fsMIStdOspfv3VersionNumber
	    INTEGER,
	fsMIStdOspfv3AreaBdrRtrStatus
	    TruthValue,
	fsMIStdOspfv3ASBdrRtrStatus
	    TruthValue,
	fsMIStdOspfv3AsScopeLsaCount
	    Gauge32,
	fsMIStdOspfv3AsScopeLsaCksumSum
	    Integer32,
	fsMIStdOspfv3OriginateNewLsas
	    Counter32,
	fsMIStdOspfv3RxNewLsas
	    Counter32,
	fsMIStdOspfv3ExtLsaCount
	    Gauge32,
	fsMIStdOspfv3ExtAreaLsdbLimit
	    Integer32,
	fsMIStdOspfv3MulticastExtensions
	    BITS,
	fsMIStdOspfv3ExitOverflowInterval
	    Unsigned32,
	fsMIStdOspfv3DemandExtensions
	    TruthValue,
	fsMIStdOspfv3TrafficEngineeringSupport
	    TruthValue,
	fsMIStdOspfv3ReferenceBandwidth
	    Unsigned32,
	fsMIStdOspfv3RestartSupport
	    INTEGER,
	fsMIStdOspfv3RestartInterval
	    UpToRefreshInterval,
	fsMIStdOspfv3RestartStatus
	    INTEGER,
	fsMIStdOspfv3RestartAge
	    UpToRefreshInterval,
	fsMIStdOspfv3RestartExitReason
	    INTEGER,
	fsMIStdOspfv3Status
	    RowStatus
	}

    fsMIStdOspfv3ContextId OBJECT-TYPE
        SYNTAX         Integer32 (0..2147483647)
	    MAX-ACCESS     not-accessible
	    STATUS         current
	    DESCRIPTION
	        "A 32-bit unique context id for each entry.	
             Minimum value is 0 and Maximum depends upon 
             system configuration. Default value is 0 which 
             will be initialized during bootup"
      ::= { fsMIStdOspfv3Entry 1 }

    fsMIStdOspfv3RouterId OBJECT-TYPE 
        SYNTAX         RouterID 
        MAX-ACCESS     read-write 
        STATUS         current 
        DESCRIPTION 
            "A  32-bit  integer  uniquely  identifying  the 
            router in the Autonomous System. 
            To  ensure  uniqueness, this may 
            default  to  the  value  of  one of the 
            router's IPv4 interface addresses if IPv4 is 
            configured on the router." 
      ::= { fsMIStdOspfv3Entry 2 } 

    fsMIStdOspfv3AdminStat OBJECT-TYPE 
        SYNTAX          Status 
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "The  administrative  status  of  OSPFv3  in  the 
            router.   The  value 'enabled' denotes that the 
            OSPFv3 Process is active on at least  one  inter- 
            face;  'disabled'  disables  it  on  all inter- 
            faces." 
      ::= { fsMIStdOspfv3Entry 3 } 
    
    fsMIStdOspfv3VersionNumber OBJECT-TYPE 
        SYNTAX          INTEGER { version3(3) } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The version number of OSPF for IPv6 is 3." 
      ::= { fsMIStdOspfv3Entry 4 }

    fsMIStdOspfv3AreaBdrRtrStatus OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "A flag to note whether this router is an  area 
            border router." 
        REFERENCE 
            "OSPF Version 2, Section 3 Splitting the AS into 
            Areas" 
      ::= { fsMIStdOspfv3Entry 5 } 

    fsMIStdOspfv3ASBdrRtrStatus OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "A flag to note whether this router is  config- 
            ured as an Autonomous System border router." 
        REFERENCE 
            "OSPF Version 2, Section 3.3  Classification  of 
            routers" 
      ::= { fsMIStdOspfv3Entry 6 } 

    fsMIStdOspfv3AsScopeLsaCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of AS-Scope (e.g. AS-External) link-state 
            advertisements in the link-state database." 
        ::= { fsMIStdOspfv3Entry 7 } 

    fsMIStdOspfv3AsScopeLsaCksumSum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The 32-bit unsigned sum of the LS checksums of 
            the  AS-scoped link-state advertisements  con- 
            tained in the link-state database. This sum 
            can  be  used  to determine if there has been a 
            change in a router's link state  database,  and 
            to  compare  the  link-state  database  of  two 
            routers." 
      ::= { fsMIStdOspfv3Entry 8 } 

    fsMIStdOspfv3OriginateNewLsas OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of  new  link-state  advertisements 
            that  have been originated.  This number is in- 
            cremented each time the router originates a new 
            LSA." 
      ::= { fsMIStdOspfv3Entry 9 } 

    fsMIStdOspfv3RxNewLsas OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of  link-state  advertisements  re- 
            ceived  determined  to  be  new instantiations. 
            This number does not include  newer  instantia- 
            tions  of self-originated link-state advertise- 
            ments." 
      ::= { fsMIStdOspfv3Entry 10 } 

    fsMIStdOspfv3ExtLsaCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of External(LS type 0x4005) in the link-
            state database" 
      ::= { fsMIStdOspfv3Entry 11 } 

    fsMIStdOspfv3ExtAreaLsdbLimit OBJECT-TYPE 
        SYNTAX          Integer32 (-1..'7FFFFFFF'h) 
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "The  maximum   number   of   non-default   AS- 
            external-LSAs entries that can be stored in the 
            link-state database.  If the value is -1, then 
            there is no limit. 

            When the number of non-default AS-external-LSAs 
            in   a  router's  link-state  database  reaches 
            ospfv3ExtAreaLsdbLimit, the router  enters  Overflow- 
            State.   The   router  never  holds  more  than 
            ospfv3ExtAreaLsdbLimit  non-default  AS-external-LSAs 
            in  its  database. OspfExtAreaLsdbLimit MUST be set 
            identically in all routers attached to the OSPFv3 
            backbone  and/or  any regular OSPFv3 area. (i.e., 
            OSPFv3 stub areas and NSSAs are excluded)." 
      ::= { fsMIStdOspfv3Entry 12 } 

    fsMIStdOspfv3MulticastExtensions OBJECT-TYPE 
        SYNTAX          BITS { 
                                 intraAreaMulticast(0), 
                                 interAreaMulticast(1), 
                                 interAsMulticast(2) 
                             } 
                                     
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "A Bit Mask indicating whether the router is 
            forwarding IPv6 multicast datagrams 
            based on the algorithms defined in the  Multi- 
            cast Extensions to OSPF. 

            If intraAreaMulticast set, indicates that the router 
            can forward  IPv6 multicast datagrams in the router's 
            directly attached areas (called intra-area mul- 
            ticast routing). 

            If interAreaMulticast set, indicates that the router 
            can forward IPv6 multicast datagrams between OSPFv3 
            areas (called inter-area multicast routing). 

            If interAsMulticast set, indicates that the router can 
            forward  IPv6  multicast datagrams between Auto- 
            nomous Systems (called inter-AS multicast rout- 
            ing). 

            Only certain combinations of bit settings are 
            allowed, namely: 
                    - All bits cleared (no multicasting) 
                    - intraAreaMulticast only, 
                    - intraAreaMulticast and interAreaMulticast, 
                    - intraAreaMulticast and interAsMulticast 
                    - intraAreaMulticast, interAreaMulticast and 
                            interAsMulticast 
            By default, all bits are cleared." 
      ::= { fsMIStdOspfv3Entry 13 } 

    fsMIStdOspfv3ExitOverflowInterval OBJECT-TYPE 
        SYNTAX          Unsigned32 
        UNITS           "seconds" 
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "The number of  seconds  that,  after  entering 
            OverflowState,  a  router will attempt to leave 
            OverflowState. This allows the router to  again 
            originate  non-default  AS-External-LSAs.  When 
            set to 0, the router will not  leave  Overflow- 
            State until restarted." 
      ::= { fsMIStdOspfv3Entry 14 } 

    fsMIStdOspfv3DemandExtensions OBJECT-TYPE 
        SYNTAX         TruthValue 
        MAX-ACCESS     read-write 
        STATUS         current 
        DESCRIPTION 
            "The router's support for demand routing." 
        REFERENCE 
            "OSPF Version 2, Appendix on Demand Routing" 
      ::= { fsMIStdOspfv3Entry 15 } 

    fsMIStdOspfv3TrafficEngineeringSupport OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-write 
        STATUS          current 
        DESCRIPTION 
            "The router's support for traffic engineering 
            extensions." 
      ::= { fsMIStdOspfv3Entry 16 } 

    fsMIStdOspfv3ReferenceBandwidth OBJECT-TYPE  
        SYNTAX       Unsigned32  
        MAX-ACCESS   read-write  
        STATUS       current  
        DESCRIPTION  
            "Reference bandwidth in kilobits/second for  
            calculating default interface metrics. The  
            default value is 100,000 KBPS (100 MBPS)"  
      ::= { fsMIStdOspfv3Entry 17 } 

    fsMIStdOspfv3RestartSupport OBJECT-TYPE  
        SYNTAX       INTEGER { none (1),  
                               plannedOnly (2),  
                               plannedAndUnplanned (3)  
                             } 
        MAX-ACCESS   read-write  
        STATUS       current  
        DESCRIPTION  
            "The router's support for OSPF hitless restart.  
            Options include: no restart support, only planned  
            restarts or both planned and unplanned restarts."  
      ::= { fsMIStdOspfv3Entry 18 }  
    
    fsMIStdOspfv3RestartInterval OBJECT-TYPE  
        SYNTAX       UpToRefreshInterval 
        UNITS        "seconds"  
        MAX-ACCESS   read-write  
        STATUS       current  
        DESCRIPTION  
            "Configured OSPF hitless restart timeout interval."  
      ::= { fsMIStdOspfv3Entry 19 }  
    
    fsMIStdOspfv3RestartStatus OBJECT-TYPE  
        SYNTAX       INTEGER { notRestarting (1),  
                               plannedRestart (2),  
                               unplannedRestart (3)  
                             }  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
            "Current status of OSPF hitless restart."  
      ::= { fsMIStdOspfv3Entry 20 }  
    
    fsMIStdOspfv3RestartAge OBJECT-TYPE  
        SYNTAX       UpToRefreshInterval 
        UNITS        "seconds"  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
            "Remaining time in current OSPF hitless restart  
            interval."  
      ::= { fsMIStdOspfv3Entry 21 }  
    
    fsMIStdOspfv3RestartExitReason OBJECT-TYPE  
        SYNTAX       INTEGER { none (1),           -- none attempted  
                               inProgress (2),     -- restart in  
                                                   -- progress  
                               completed (3),      -- successfully  
                                                   -- completed  
                               timedOut (4),       -- timed out  
                               topologyChanged (5) -- aborted due to  
                                                   -- topologychange.  
                             }  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
            "Describes the outcome of the last attempt at a  
            hitless restart. If the value is 'none', no restart  
            has yet been attempted. If the value is 'inProgress',  
            a restart attempt is currently underway."  
      ::= { fsMIStdOspfv3Entry 22 } 

    fsMIStdOspfv3Status OBJECT-TYPE
        SYNTAX  RowStatus
	    MAX-ACCESS   read-write
	    STATUS   current
	    DESCRIPTION
	        "This variable displays the status of  the  en-
	        try.  The internal  effect (row removal) is 
		implementation dependent."
      ::= { fsMIStdOspfv3Entry 23 }

--      The OSPFv3 Area Data Structure contains information 
--      regarding the various areas. The interfaces and 
--      virtual links are configured as part of these areas. 
--      Area 0.0.0.0, by definition, is the Backbone Area 

   fsMIStdOspfv3AreaTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3AreaEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "Information describing the configured  parame- 
            ters  and cumulative statistics of the router's 
            attached areas." 
        REFERENCE 
            "OSPF Version 2, Section 6 The Area Data Struc- 
            ture" 
        ::= { fsMIStdOspfv3Objects 2 } 

   fsMIStdOspfv3AreaEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3AreaEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "Information describing the configured parame- 
            ters and cumulative statistics of one of the 
            router's attached areas." 
        INDEX { fsMIStdOspfv3ContextId, fsMIStdOspfv3AreaId } 
        ::= { fsMIStdOspfv3AreaTable 1 } 

FsMIStdOspfv3AreaEntry ::= SEQUENCE { 
        fsMIStdOspfv3AreaId 
                AreaID, 
        fsMIStdOspfv3ImportAsExtern 
                INTEGER, 
        fsMIStdOspfv3AreaSpfRuns 
                Counter32, 
        fsMIStdOspfv3AreaBdrRtrCount 
                Gauge32, 
        fsMIStdOspfv3AreaAsBdrRtrCount 
                Gauge32, 
        fsMIStdOspfv3AreaScopeLsaCount 
                Gauge32, 
        fsMIStdOspfv3AreaScopeLsaCksumSum 
                Integer32, 
        fsMIStdOspfv3AreaSummary 
                INTEGER, 
        fsMIStdOspfv3StubMetric 
                BigMetric, 
        fsMIStdOspfv3AreaNssaTranslatorRole 
                INTEGER, 
        fsMIStdOspfv3AreaNssaTranslatorState 
                INTEGER, 
        fsMIStdOspfv3AreaNssaTranslatorStabilityInterval 
                Unsigned32, 
        fsMIStdOspfv3AreaNssaTranslatorEvents 
                Counter32, 
        fsMIStdOspfv3AreaStubMetricType 
                INTEGER, 
        fsMIStdOspfv3AreaStatus 
                RowStatus 
        } 

    fsMIStdOspfv3AreaId OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A 32-bit integer uniquely identifying an area. 
            Area ID 0.0.0.0 is used for the OSPFv3 backbone." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3AreaEntry 1 } 

    fsMIStdOspfv3ImportAsExtern OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        importExternal(1),   -- normal area 
                        importNoExternal(2), -- stub area 
                        importNssa(3)        -- not-so-stubby-area 
                        } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "Indicates whether an area is a Stub area, NSSA, or 
            standard area. AS-scope LSAs are not imported into Stub 
            Areas or NSSAs. NSSAs import AS-External data as Type-7 
            LSAs which have Area-scope" 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
        DEFVAL { importExternal } 
      ::= { fsMIStdOspfv3AreaEntry 2 } 

    fsMIStdOspfv3AreaSpfRuns OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of times that the intra-area  route 
            table  has  been  calculated  using this area's 
            link-state database.  This  is  typically  done 
            using Dijkstra's algorithm." 
      ::= { fsMIStdOspfv3AreaEntry 3 } 

    fsMIStdOspfv3AreaBdrRtrCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The total number of area border routers reach- 
            able within this area.  This is initially zero, 
            and is calculated in each SPF Pass." 
      ::= { fsMIStdOspfv3AreaEntry 4 } 

    fsMIStdOspfv3AreaAsBdrRtrCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The total number of Autonomous  System  border 
            routers  reachable  within  this area.  This is 
            initially zero, and is calculated in  each  SPF 
            Pass." 
      ::= { fsMIStdOspfv3AreaEntry 5 } 

    fsMIStdOspfv3AreaScopeLsaCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The total number of Area-Scope link-state  
            advertisements in  this  area's link-state  
            database." 
      ::= { fsMIStdOspfv3AreaEntry 6 } 

    fsMIStdOspfv3AreaScopeLsaCksumSum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The 32-bit unsigned sum of the Area-Scope link-state 
            advertisements'  LS  checksums  contained in this 
            area's link-state database.  The sum can be used 
            to determine if  there  has been  a  change  in a 
            router's link state database, and to compare the 
            link-state database of two routers." 
      ::= { fsMIStdOspfv3AreaEntry 7 } 

    fsMIStdOspfv3AreaSummary OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        noAreaSummary(1), 
                        sendAreaSummary(2) 
                        } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The variable ospfv3AreaSummary controls the  im- 
            port  of  Inter-Area LSAs into stub areas.  It has 
            no effect on other areas. 

            If it is noAreaSummary, the router will neither 
            originate  nor  propagate Inter-Area LSAs into the 
            stub area.  It will rely entirely  on  its  de- 
            fault route. 

            If it is sendAreaSummary, the router will  both 
            summarize and propagate Inter-Area LSAs." 
        DEFVAL   { sendAreaSummary } 
      ::= { fsMIStdOspfv3AreaEntry 8 } 

    fsMIStdOspfv3StubMetric OBJECT-TYPE 
        SYNTAX          BigMetric 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The metric value advertised for the default route 
             into Stub and NSSA areas." 
      ::= { fsMIStdOspfv3AreaEntry 9 } 

    fsMIStdOspfv3AreaNssaTranslatorRole OBJECT-TYPE 
        SYNTAX          INTEGER { always(1), candidate(2) } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "Indicates an NSSA Border router's ability to 
            perform NSSA translation of type-7 LSAs into 
            type-5 LSAs." 
        DEFVAL { candidate } 
      ::= { fsMIStdOspfv3AreaEntry 10 } 

   fsMIStdOspfv3AreaNssaTranslatorState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        enabled(1), 
                        elected(2), 
                        disabled(3) 
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Indicates if and how an NSSA Border router is 
             performing NSSA translation of type-7 LSAs into type-5 
             LSAs. When this object is set to enabled, the NSSA 
             Border router's ospfv3AreaNssTranslatorRole 
             has been set to always. When this object is set to 
             elected, a candidate NSSA Border router is translating 
             type-7 LSAs into type-5. When this object is set to 
             disabled, a candidate NSSA Border router is NOT 
             translating type-7 LSAs into type-5." 
      ::= { fsMIStdOspfv3AreaEntry 11 } 

    fsMIStdOspfv3AreaNssaTranslatorStabilityInterval OBJECT-TYPE 
        SYNTAX          Unsigned32 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The number of seconds after an elected translator 
            determines its services are no longer required, that 
            it should continue to perform its translation duties." 
        DEFVAL { 40 } 
      ::= { fsMIStdOspfv3AreaEntry 12 } 

    fsMIStdOspfv3AreaNssaTranslatorEvents OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Indicates the number of Translator State changes 
            that have occurred since the last boot-up." 
      ::= { fsMIStdOspfv3AreaEntry 13 } 

    fsMIStdOspfv3AreaStubMetricType OBJECT-TYPE 
        SYNTAX       INTEGER { 
                        ospfMetric (1),  -- OSPF Metric 
                        comparableCost (2), -- external type 1 
                        nonComparable  (3) -- external type 2 
                        } 
        MAX-ACCESS   read-create 
        STATUS       current 
        DESCRIPTION 
           "This variable displays the type of metric ad- 
           vertised as a default route." 
        DEFVAL { ospfMetric } 
      ::= { fsMIStdOspfv3AreaEntry 14 } 

    fsMIStdOspfv3AreaStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of  the  en- 
            try. The use of RowStatus is covered in more detail 
            in [6]." 
      ::= { fsMIStdOspfv3AreaEntry 15 } 

--    OSPFv3 AS-Scope Link State Database 

--    The Link State Database contains the AS-Scope Link State 
--    Advertisements from throughout the areas that the 
--    device is attached to. 

    fsMIStdOspfv3AsLsdbTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3AsLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Process's AS-Scope Link State Database." 
        ::= { fsMIStdOspfv3Objects 3 } 

    fsMIStdOspfv3AsLsdbEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3AsLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A single AS-Scope Link State Advertisement." 
        INDEX { fsMIStdOspfv3ContextId, 
	        fsMIStdOspfv3AsLsdbType, 
                fsMIStdOspfv3AsLsdbRouterId, 
                fsMIStdOspfv3AsLsdbLsid } 
      ::= { fsMIStdOspfv3AsLsdbTable 1 } 

FsMIStdOspfv3AsLsdbEntry ::= SEQUENCE { 
        fsMIStdOspfv3AsLsdbType 
                Unsigned32, 
        fsMIStdOspfv3AsLsdbRouterId 
                RouterID, 
        fsMIStdOspfv3AsLsdbLsid 
                IpAddress, 
        fsMIStdOspfv3AsLsdbSequence 
                Integer32, 
        fsMIStdOspfv3AsLsdbAge 
                Integer32, 
        fsMIStdOspfv3AsLsdbChecksum 
                Integer32, 
        fsMIStdOspfv3AsLsdbAdvertisement 
                OCTET STRING, 
        fsMIStdOspfv3AsLsdbTypeKnown 
                TruthValue 
        } 

    fsMIStdOspfv3AsLsdbType OBJECT-TYPE 
        SYNTAX          Unsigned32(0..'FFFFFFFF'h) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The type of the link state advertisement. 
            Each link state type has a separate advertise- 
            ment format. AS-Scope LSAs not recognized by 
            the router may be stored in the database." 
      ::= { fsMIStdOspfv3AsLsdbEntry 1 } 

    fsMIStdOspfv3AsLsdbRouterId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The 32 bit number that uniquely identifies the 
            originating router in the Autonomous System." 
        REFERENCE 
            "OSPF Version 2, Appendix C.1 Global parameters" 
      ::= { fsMIStdOspfv3AsLsdbEntry 2 } 

    fsMIStdOspfv3AsLsdbLsid OBJECT-TYPE 
        SYNTAX          IpAddress 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The Link State ID is an LS Type Specific field 
            containing a unique identifier; 
            it identifies the piece of the  routing  domain 
            that is being described by the advertisement. 
            In contrast to OSPFv2, the LSID has no 
            addressing semantics." 
      ::= { fsMIStdOspfv3AsLsdbEntry 3 } 

-- Note that the OSPF Sequence Number is a 32 bit signed 
-- integer.  It starts with the value '80000001'h, 
-- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h 
-- Thus, a typical sequence number will be very negative. 

    fsMIStdOspfv3AsLsdbSequence OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The sequence number field is a  signed  32-bit 
            integer.   It  is used to detect old and dupli- 
            cate link state advertisements.  The  space  of 
            sequence  numbers  is  linearly  ordered.   The 
            larger the sequence number the more recent  the 
            advertisement." 
        REFERENCE 
            "OSPF Version  2,  Section  12.1.6  LS  sequence 
            number" 
      ::= { fsMIStdOspfv3AsLsdbEntry 4 } 

    fsMIStdOspfv3AsLsdbAge OBJECT-TYPE 
        SYNTAX          Integer32 -- Should be 0..MaxAge 
                                  -- unless DoNotAge bit is set 
        UNITS           "seconds" 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the age of the link state adver- 
            tisement in seconds." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.1 LS age" 
      ::= { fsMIStdOspfv3AsLsdbEntry 5 } 

    fsMIStdOspfv3AsLsdbChecksum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the  checksum  of  the  complete 
            contents  of  the  advertisement, excepting the 
            age field.  The age field is excepted  so  that 
            an   advertisement's  age  can  be  incremented 
            without updating the  checksum.   The  checksum 
            used  is  the same that is used for ISO connec- 
            tionless datagrams; it is commonly referred  to 
            as the Fletcher checksum." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.7 LS checksum" 
      ::= { fsMIStdOspfv3AsLsdbEntry 6 } 

    fsMIStdOspfv3AsLsdbAdvertisement OBJECT-TYPE 
        SYNTAX          OCTET STRING (SIZE (1..65535)) 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The entire Link State Advertisement, including 
            its header." 
      ::= { fsMIStdOspfv3AsLsdbEntry 7 } 

    fsMIStdOspfv3AsLsdbTypeKnown OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Is the LSA type recognized by this Router?" 
      ::= { fsMIStdOspfv3AsLsdbEntry 8 } 


-- OSPFv3 Area-Scope Link State Database 

-- The Link State Database contains the Area-Scope Link State 
-- Advertisements from throughout the area that the 
-- device is attached to. 

    fsMIStdOspfv3AreaLsdbTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3AreaLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Process's Area-Scope Link State Database." 
      ::= { fsMIStdOspfv3Objects 4 } 

    fsMIStdOspfv3AreaLsdbEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3AreaLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A single Area-Scope Link State Advertisement." 
        INDEX { fsMIStdOspfv3ContextId,
	        fsMIStdOspfv3AreaLsdbAreaId, 
                fsMIStdOspfv3AreaLsdbType, 
                fsMIStdOspfv3AreaLsdbRouterId, 
                fsMIStdOspfv3AreaLsdbLsid } 
      ::= { fsMIStdOspfv3AreaLsdbTable 1 } 

FsMIStdOspfv3AreaLsdbEntry ::= SEQUENCE { 
        fsMIStdOspfv3AreaLsdbAreaId 
                AreaID, 
        fsMIStdOspfv3AreaLsdbType 
                Unsigned32, 
        fsMIStdOspfv3AreaLsdbRouterId 
                RouterID, 
        fsMIStdOspfv3AreaLsdbLsid 
                IpAddress, 
        fsMIStdOspfv3AreaLsdbSequence 
                Integer32, 
        fsMIStdOspfv3AreaLsdbAge 
                Integer32, 
        fsMIStdOspfv3AreaLsdbChecksum 
                Integer32, 
        fsMIStdOspfv3AreaLsdbAdvertisement 
                OCTET STRING, 
        fsMIStdOspfv3AreaLsdbTypeKnown 
                TruthValue 
        } 

    fsMIStdOspfv3AreaLsdbAreaId OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The 32 bit identifier of the Area from which the 
            LSA was received." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 1 } 

    fsMIStdOspfv3AreaLsdbType OBJECT-TYPE 
        SYNTAX          Unsigned32(0..'FFFFFFFF'h) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The type  of  the  link  state  advertisement. 
            Each  link state type has a separate advertise- 
            ment format. Area-Scope LSAs unrecognized by the 
            router are also stored in this database." 
      ::= { fsMIStdOspfv3AreaLsdbEntry 2 } 

    fsMIStdOspfv3AreaLsdbRouterId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The 32 bit number that uniquely identifies the 
            originating router in the Autonomous System." 
        REFERENCE 
            "OSPF Version 2, Appendix C.1 Global parameters" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 3 } 

    fsMIStdOspfv3AreaLsdbLsid OBJECT-TYPE 
        SYNTAX          IpAddress 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The Link State ID is an LS Type Specific field 
            containing a unique identifier; 
            it identifies the piece of the  routing  domain 
            that is being described by the advertisement. 
            In contrast to OSPFv2, the LSID has no 
            addressing semantics." 
      ::= { fsMIStdOspfv3AreaLsdbEntry 4 } 

--      Note that the OSPF Sequence Number is a 32 bit signed 
--      integer.  It starts with the value '80000001'h, 
--      or -'7FFFFFFF'h, and increments until '7FFFFFFF'h 
--      Thus, a typical sequence number will be very negative. 

    fsMIStdOspfv3AreaLsdbSequence OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The sequence number field is a  signed  32-bit 
            integer.   It  is used to detect old and dupli- 
            cate link state advertisements.  The  space  of 
            sequence  numbers  is  linearly  ordered.   The 
            larger the sequence number the more recent  the 
            advertisement." 
        REFERENCE 
            "OSPF Version  2,  Section  12.1.6  LS  sequence 
            number" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 5 } 

    fsMIStdOspfv3AreaLsdbAge OBJECT-TYPE 
        SYNTAX          Integer32 -- Should be 0..MaxAge 
                                  -- unless DoNotAge bit is set 
        UNITS           "seconds" 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the age of the link state adver- 
            tisement in seconds." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.1 LS age" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 6 } 

    fsMIStdOspfv3AreaLsdbChecksum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the  checksum  of  the  complete 
            contents  of  the  advertisement, excepting the 
            age field.  The age field is excepted  so  that 
            an   advertisement's  age  can  be  incremented 
            without updating the  checksum.   The  checksum 
            used  is  the same that is used for ISO connec- 
            tionless datagrams; it is commonly referred  to 
            as the Fletcher checksum." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.7 LS checksum" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 7 } 

    fsMIStdOspfv3AreaLsdbAdvertisement OBJECT-TYPE 
        SYNTAX          OCTET STRING (SIZE (1..65535)) 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The entire Link State Advertisement, including 
            its header." 
      ::= { fsMIStdOspfv3AreaLsdbEntry 8 } 

    fsMIStdOspfv3AreaLsdbTypeKnown OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Is the LSA type recognized by this Router?" 
      ::= { fsMIStdOspfv3AreaLsdbEntry 9 } 

--      OSPFv3 Link-Scope Link State Database 

--      The Link State Database contains the Link-Scope Link State 
--      Advertisements from the links that the 
--      device is attached to. 

    fsMIStdOspfv3LinkLsdbTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3LinkLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Process's Link-Scope Link State Database." 
      ::= { fsMIStdOspfv3Objects 5 } 

    fsMIStdOspfv3LinkLsdbEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3LinkLsdbEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A single Link-Scope Link State Advertisement." 
        INDEX { fsMIStdOspfv3LinkLsdbIfIndex, 
                fsMIStdOspfv3LinkLsdbType, 
                fsMIStdOspfv3LinkLsdbRouterId, 
                fsMIStdOspfv3LinkLsdbLsid } 
      ::= { fsMIStdOspfv3LinkLsdbTable 1 } 

FsMIStdOspfv3LinkLsdbEntry ::= SEQUENCE { 
        fsMIStdOspfv3LinkLsdbIfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3LinkLsdbType 
                Unsigned32, 
        fsMIStdOspfv3LinkLsdbRouterId 
                RouterID, 
        fsMIStdOspfv3LinkLsdbLsid 
                IpAddress, 
        fsMIStdOspfv3LinkLsdbSequence 
                Integer32, 
        fsMIStdOspfv3LinkLsdbAge 
                Integer32, 
        fsMIStdOspfv3LinkLsdbChecksum 
                Integer32, 
        fsMIStdOspfv3LinkLsdbAdvertisement 
                OCTET STRING, 
        fsMIStdOspfv3LinkLsdbTypeKnown 
                TruthValue,
        fsMIStdOspfv3LinkLsdbContextId 
	            Integer32
        } 

    fsMIStdOspfv3LinkLsdbIfIndex OBJECT-TYPE 
        SYNTAX         InterfaceIndex 
        MAX-ACCESS     not-accessible 
        STATUS         current 
        DESCRIPTION 
            "The identifier of the link from which the LSA 
            was received." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3LinkLsdbEntry 1 } 

    fsMIStdOspfv3LinkLsdbType OBJECT-TYPE 
        SYNTAX          Unsigned32(0..'FFFFFFFF'h) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The type of the link state advertisement. 
            Each link state type has a separate advertise- 
            ment format. Link-Scope LSAs unrecognized by the 
            router are also stored in this database." 
      ::= { fsMIStdOspfv3LinkLsdbEntry 2 } 

    fsMIStdOspfv3LinkLsdbRouterId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The 32 bit number that uniquely identifies the 
            originating router in the Autonomous System." 
        REFERENCE 
            "OSPF Version 2, Appendix C.1 Global parameters" 
      ::= { fsMIStdOspfv3LinkLsdbEntry 3 } 

    fsMIStdOspfv3LinkLsdbLsid OBJECT-TYPE 
        SYNTAX        IpAddress 
        MAX-ACCESS    not-accessible 
        STATUS        current 
        DESCRIPTION 
            "The Link State ID is an LS Type Specific field 
            containing a unique identifier; 
            it identifies the piece of the  routing  domain 
            that is being described by the advertisement. 
            In contrast to OSPFv2, the LSID has no 
            addressing semantics." 
      ::= { fsMIStdOspfv3LinkLsdbEntry 4 } 

--      Note that the OSPF Sequence Number is a 32 bit signed 
--      integer.  It starts with the value '80000001'h, 
--      or -'7FFFFFFF'h, and increments until '7FFFFFFF'h 
--      Thus, a typical sequence number will be very negative. 

    fsMIStdOspfv3LinkLsdbSequence OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The sequence number field is a  signed  32-bit 
            integer.   It  is used to detect old and dupli- 
            cate link state advertisements.  The  space  of 
            sequence  numbers  is  linearly  ordered.   The 
            larger the sequence number the more recent  the 
            advertisement." 
        REFERENCE 
            "OSPF Version  2,  Section  12.1.6  LS  sequence 
            number" 
      ::= { fsMIStdOspfv3LinkLsdbEntry 5 } 

    fsMIStdOspfv3LinkLsdbAge OBJECT-TYPE 
        SYNTAX          Integer32 -- Should be 0..MaxAge 
                                  -- unless DoNotAge bit is set 
        UNITS           "seconds" 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the age of the link state 
            advertisement in seconds." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.1 LS age" 
      ::= { fsMIStdOspfv3LinkLsdbEntry 6 } 

    fsMIStdOspfv3LinkLsdbChecksum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "This field is the  checksum  of  the  complete 
            contents  of  the  advertisement, excepting the 
            age field.  The age field is excepted  so  that 
            an   advertisement's  age  can  be  incremented 
            without updating the  checksum.   The  checksum 
            used  is  the same that is used for ISO connec- 
            tionless datagrams; it is commonly referred  to 
            as the Fletcher checksum." 
        REFERENCE 
            "OSPF Version 2, Section 12.1.7 LS checksum" 
      ::= { fsMIStdOspfv3LinkLsdbEntry 7 } 

    fsMIStdOspfv3LinkLsdbAdvertisement OBJECT-TYPE 
        SYNTAX          OCTET STRING (SIZE (1..65535)) 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The entire Link State Advertisement, including 
            its header." 
      ::= { fsMIStdOspfv3LinkLsdbEntry 8 } 

    fsMIStdOspfv3LinkLsdbTypeKnown OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Indicates whether the LSA type is recognized by this 
             Router." 
      ::= { fsMIStdOspfv3LinkLsdbEntry 9 } 

    fsMIStdOspfv3LinkLsdbContextId OBJECT-TYPE
        SYNTAX          Integer32
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "A 32-bit unique context id for each entry. 
             Minimum value is 0 and Maximum depends upon system 
             configuration. Default value is 0 which will be initialized 
             during bootup"
      ::= { fsMIStdOspfv3LinkLsdbEntry 10 }

--      OSPF Host Table 

--      The Host/Metric Table indicates what hosts are directly 
--      attached to the Router, and what metrics and types of 
--      service should be advertised for them. 

    fsMIStdOspfv3HostTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3HostEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The list of Hosts, and their metrics, that the 
            router will advertise as host routes." 
        REFERENCE 
            "OSPF Version 2, Appendix C.6  Host route param- 
            eters" 
      ::= { fsMIStdOspfv3Objects 6 } 

    fsMIStdOspfv3HostEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3HostEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A metric to be advertised when a given host is 
            reachable." 
        INDEX { fsMIStdOspfv3ContextId,
	        fsMIStdOspfv3HostAddressType, 
                fsMIStdOspfv3HostAddress } 
      ::= { fsMIStdOspfv3HostTable 1 } 

FsMIStdOspfv3HostEntry ::= SEQUENCE { 
        fsMIStdOspfv3HostAddressType 
                InetAddressType, 
        fsMIStdOspfv3HostAddress 
                InetAddress, 
        fsMIStdOspfv3HostMetric 
                Metric, 
        fsMIStdOspfv3HostAreaID 
                AreaID, 
        fsMIStdOspfv3HostStatus 
                RowStatus 
        } 

    fsMIStdOspfv3HostAddressType OBJECT-TYPE 
        SYNTAX          InetAddressType 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The address type of fsMIStdOspfv3HostAddress. Only IPv6 
            addresses without zone index are expected." 
        REFERENCE 
            "OSPF Version 2, Appendix C.6 Host route parame- 
            ters" 
      ::= { fsMIStdOspfv3HostEntry 1 } 


    fsMIStdOspfv3HostAddress OBJECT-TYPE 
        SYNTAX          InetAddress (SIZE (16)) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The IPv6 Address of the Host. Must be a Global 
             or Site-local address." 
        REFERENCE 
            "OSPF Version 2, Appendix C.6 Host route parame- 
            ters" 
      ::= { fsMIStdOspfv3HostEntry 2 } 

    fsMIStdOspfv3HostMetric OBJECT-TYPE 
        SYNTAX          Metric 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The Metric to be advertised." 
        REFERENCE 
            "OSPF Version 2, Appendix C.6 Host route parame- 
            ters" 
      ::= { fsMIStdOspfv3HostEntry 3 } 

    fsMIStdOspfv3HostAreaID OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The Area the Host Entry is to be found within. 
            By  default, the area that a subsuming OSPFv3 in- 
            terface is in, or 0.0.0.0" 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3HostEntry 4 } 

    fsMIStdOspfv3HostStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of  the  en- 
            try. The use of RowStatus is covered in more detail 
            in [6]." 
      ::= { fsMIStdOspfv3HostEntry 5 } 

--      OSPFv3 Interface Table 

    fsMIStdOspfv3IfTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3IfEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Interface Table describes the  inter- 
            faces from the viewpoint of OSPFv3." 
        REFERENCE 
            "OSPF Version 2, Appendix C.3  Router  interface 
            parameters" 
      ::= { fsMIStdOspfv3Objects 7 } 

    fsMIStdOspfv3IfEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3IfEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Interface Entry describes one  inter- 
            face from the viewpoint of OSPFv3." 
        INDEX {fsMIStdOspfv3IfIndex } 
      ::= { fsMIStdOspfv3IfTable 1 } 

FsMIStdOspfv3IfEntry ::= SEQUENCE { 
        fsMIStdOspfv3IfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3IfAreaId 
                AreaID, 
        fsMIStdOspfv3IfType 
                INTEGER, 
        fsMIStdOspfv3IfAdminStat 
                Status, 
        fsMIStdOspfv3IfRtrPriority 
                DesignatedRouterPriority, 
        fsMIStdOspfv3IfTransitDelay 
                UpToRefreshInterval, 
        fsMIStdOspfv3IfRetransInterval 
                UpToRefreshInterval, 
        fsMIStdOspfv3IfHelloInterval 
                HelloRange, 
        fsMIStdOspfv3IfRtrDeadInterval 
                 RouterDeadRange, 
        fsMIStdOspfv3IfPollInterval 
                Unsigned32, 
        fsMIStdOspfv3IfState 
                INTEGER, 
        fsMIStdOspfv3IfDesignatedRouter 
                RouterID, 
        fsMIStdOspfv3IfBackupDesignatedRouter 
                RouterID, 
        fsMIStdOspfv3IfEvents 
                Counter32, 
        fsMIStdOspfv3IfMulticastForwarding 
                INTEGER, 
        fsMIStdOspfv3IfDemand 
                TruthValue, 
        fsMIStdOspfv3IfMetricValue 
                Metric, 
        fsMIStdOspfv3IfLinkScopeLsaCount 
                Gauge32, 
        fsMIStdOspfv3IfLinkLsaCksumSum 
                Integer32, 
        fsMIStdOspfv3IfInstId 
                Integer32, 
        fsMIStdOspfv3IfDemandNbrProbe 
                TruthValue, 
        fsMIStdOspfv3IfDemandNbrProbeRetxLimit  
                Unsigned32, 
        fsMIStdOspfv3IfDemandNbrProbeInterval  
                Unsigned32, 
        fsMIStdOspfv3IfContextId 
                Integer32, 
        fsMIStdOspfv3IfStatus 
                RowStatus
        } 

    fsMIStdOspfv3IfIndex OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The interface index of this OSPFv3 interface. 
             It corresponds to the interface index of the 
             IPv6 interface on which OSPFv3 is configured." 
      ::= { fsMIStdOspfv3IfEntry 1 } 

    fsMIStdOspfv3IfAreaId OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "A 32-bit integer uniquely identifying the area 
            to  which  the  interface  connects.   Area  ID 
            0.0.0.0 is used for the OSPFv3 backbone." 
        DEFVAL          { '00000000'H } -- 0.0.0.0 
      ::= { fsMIStdOspfv3IfEntry 2 } 

    fsMIStdOspfv3IfType OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        broadcast(1), 
                        nbma(2), 
                        pointToPoint(3), 
                        pointToMultipoint(5) 
                        } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 interface type." 
      ::= { fsMIStdOspfv3IfEntry 3 } 

    fsMIStdOspfv3IfAdminStat OBJECT-TYPE 
        SYNTAX          Status 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 interface's  administrative  status. 
            The  value formed on the interface, and the in- 
            terface will be advertised as an internal route 
            to  some  area.   The  value 'disabled' denotes 
            that the interface is external to OSPFv3." 
        DEFVAL          { enabled } 
      ::= { fsMIStdOspfv3IfEntry 4 } 

    fsMIStdOspfv3IfRtrPriority OBJECT-TYPE 
        SYNTAX          DesignatedRouterPriority 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The  priority  of  this  interface.   Used  in 
            multi-access  networks,  this  field is used in 
            the designated router election algorithm.   The 
            value 0 signifies that the router is not eligi- 
            ble to become the  designated  router  on  this 
            particular  network.   In the event of a tie in 
            this value, routers will use their Router ID as 
            a tie breaker." 
        DEFVAL          { 1 } 
      ::= { fsMIStdOspfv3IfEntry 5 } 

    fsMIStdOspfv3IfTransitDelay OBJECT-TYPE 
        SYNTAX          UpToRefreshInterval 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The estimated number of seconds  it  takes  to 
            transmit  a  link state update packet over this 
            interface." 
        DEFVAL          { 1 } 
      ::= { fsMIStdOspfv3IfEntry 6 } 

    fsMIStdOspfv3IfRetransInterval OBJECT-TYPE 
        SYNTAX          UpToRefreshInterval 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The number of seconds between  link-state  ad- 
            vertisement  retransmissions,  for  adjacencies 
            belonging to this  interface.   This  value  is 
            also used when retransmitting database descrip- 
            tion and link-state request packets." 
        DEFVAL          { 5 } 
      ::= { fsMIStdOspfv3IfEntry 7 } 

    fsMIStdOspfv3IfHelloInterval OBJECT-TYPE 
        SYNTAX          HelloRange 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The length of time, in  seconds,  between  the 
            Hello  packets that the router sends on the in- 
            terface.  This value must be the same  for  all 
            routers attached to a common network." 
        DEFVAL          { 10 } 
      ::= { fsMIStdOspfv3IfEntry 8 } 

    fsMIStdOspfv3IfRtrDeadInterval OBJECT-TYPE 
        SYNTAX          RouterDeadRange 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The number of seconds that  a  router's  Hello 
            packets  have  not been seen before it's neigh- 
            bors declare the router down.  This  should  be 
            some  multiple  of  the  Hello  interval.  This 
            value must be the same for all routers attached 
            to a common network." 
        DEFVAL          { 40 } 
      ::= { fsMIStdOspfv3IfEntry 9 } 

    fsMIStdOspfv3IfPollInterval OBJECT-TYPE 
        SYNTAX          Unsigned32 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The larger time interval, in seconds,  between 
            the  Hello  packets  sent  to  an inactive non- 
            broadcast multi- access neighbor." 
        DEFVAL          { 120 } 
      ::= { fsMIStdOspfv3IfEntry 10 } 

    fsMIStdOspfv3IfState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        down(1),                  -- The interface is Down
                        loopback(2),              -- The interface may be looped back in hardware
                                                  -- or software

                        waiting(3),               -- the router is trying to determine the
                                                  -- identity of the  DR/BDR for the network

                        pointToPoint(4),          -- the interface is operational, and connects
                                                  -- either to a physical point-to-point 
                                                  -- network or to a virtual link

                        designatedRouter(5),      -- The router itself is the Designated Router
                                                  -- on the attached network

                        backupDesignatedRouter(6),-- The router itself is the BDR 
                                                  -- on the attached network

                        otherDesignatedRouter(7), -- The interface is to a broadcast or NBMA 
                                                  -- network on which another router has been 
                                                  -- selected to be the Designated Router

                        standbyOnLink(8)          -- the interface is one of multiple interfaces 
                                                  -- to a link and this interface is not sending 
                                                  -- or receiving control packets. By Default an
                                                  -- interface is  'activeOnLink'.
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The OSPFv3 Interface State." 
      ::= { fsMIStdOspfv3IfEntry 11 } 

    fsMIStdOspfv3IfDesignatedRouter OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The Router ID of the Designated Router." 
      ::= { fsMIStdOspfv3IfEntry 12 } 

    fsMIStdOspfv3IfBackupDesignatedRouter OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The  Router ID of  the  Backup   Designated 
            Router." 
      ::= { fsMIStdOspfv3IfEntry 13 } 

    fsMIStdOspfv3IfEvents OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of times this  OSPF  interface  has 
            changed its state, or an error has occurred." 
      ::= { fsMIStdOspfv3IfEntry 14 } 

    fsMIStdOspfv3IfMulticastForwarding OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        blocked(1),   -- no multicast forwarding 
                        multicast(2), -- using multicast address 
                        unicast(3)    -- to each OSPFv3 neighbor 
                        } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The way multicasts should  forwarded  on  this 
            interface;  not  forwarded,  forwarded  as data 
            link multicasts, or forwarded as data link uni- 
            casts.   Data link multicasting is not meaning- 
            ful on point to point and NBMA interfaces,  and 
            setting fsMIStdOspfv3MulticastForwarding to 0 effective- 
            ly disables all multicast forwarding." 
        DEFVAL { blocked } 
      ::= { fsMIStdOspfv3IfEntry 15 } 

    fsMIStdOspfv3IfDemand OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "Indicates whether Demand OSPFv3 procedures (hel- 
            lo suppression to FULL neighbors and setting the 
            DoNotAge flag on propagated LSAs) should be per- 
            formed on this interface." 
        DEFVAL { false } 
      ::= { fsMIStdOspfv3IfEntry 16 } 

    fsMIStdOspfv3IfMetricValue OBJECT-TYPE 
        SYNTAX          Metric 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The metric assigned to this interface. 
             The default value of the Metric is 
            Reference Bandwidth / ifSpeed. The value of the   
            reference bandwidth is configured by the 
            fsMIStdOspfv3ReferenceBandwidth object." 
      ::= { fsMIStdOspfv3IfEntry 17 } 

    fsMIStdOspfv3IfLinkScopeLsaCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The total number of Link-Scope link-state 
            advertisements in  this  link's link-state database." 
      ::= { fsMIStdOspfv3IfEntry 18 } 

    fsMIStdOspfv3IfLinkLsaCksumSum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The 32-bit unsigned sum of the Link-Scope link-state 
            advertisements'  LS  checksums  contained in this 
            link's link-state database.  The sum can be used 
            to determine if  there  has been  a  change  in a 
            router's link state database, and to compare the 
            link-state database of two routers." 
      ::= { fsMIStdOspfv3IfEntry 19 } 

    fsMIStdOspfv3IfInstId OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "Enables multiple instances of OSPFv3 to be run over 
            a single link. Each protocol instance would be assigned 
            a separate ID. This ID has local link significance 
            only." 
        DEFVAL          { 0 } 
      ::= { fsMIStdOspfv3IfEntry 20 } 

    fsMIStdOspfv3IfDemandNbrProbe OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
               " Indicates whether or not neighbor probing is 
                 enabled to determine whether or not the neighbor  
                 is inactive. Neighbor probing is disabled by  
                 default." 
        DEFVAL { false } 
      ::= { fsMIStdOspfv3IfEntry 21 } 

    fsMIStdOspfv3IfDemandNbrProbeRetxLimit OBJECT-TYPE  
        SYNTAX       Unsigned32  
        UNITS        "seconds"  
        MAX-ACCESS   read-create 
        STATUS       current  
        DESCRIPTION  
           " The number of consecutive LSA retransmissions before 
             the neighbor is deemed inactive and the neighbor  
             adjacency is brought down."  
        DEFVAL          { 10 } 
      ::= { fsMIStdOspfv3IfEntry 22 }  

    fsMIStdOspfv3IfDemandNbrProbeInterval OBJECT-TYPE  
        SYNTAX       Unsigned32  
        UNITS        "seconds"  
        MAX-ACCESS   read-create 
        STATUS       current  
        DESCRIPTION  
           " Defines how often the neighbor will be probed."  
        DEFVAL          { 120 } 
      ::= { fsMIStdOspfv3IfEntry 23 }  

    fsMIStdOspfv3IfContextId OBJECT-TYPE
        SYNTAX          Integer32
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "A 32-bit unique context id for each entry. 
             Minimum value is 0 and Maximum depends upon system 
             configuration. Default value is 0 which will be initialized 
             during bootup"
      ::= { fsMIStdOspfv3IfEntry 24 }

    fsMIStdOspfv3IfStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of  the  en- 
            try. The use of RowStatus is covered in more detail in 
            [6]." 
      ::= { fsMIStdOspfv3IfEntry 25 } 

--      OSPFv3 Virtual Interface Table 

--      The Virtual Interface Table describes the virtual 
--      links that the OSPFv3 Process is configured to 
--      carry on. 

    fsMIStdOspfv3VirtIfTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3VirtIfEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "Information about this router's virtual inter- 
            faces." 
        REFERENCE 
            "OSPF Version  2,  Appendix  C.4   Virtual  link 
            parameters" 
      ::= { fsMIStdOspfv3Objects 8 } 

    fsMIStdOspfv3VirtIfEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3VirtIfEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "Information about a single Virtual Interface." 
        INDEX { fsMIStdOspfv3ContextId,
	        fsMIStdOspfv3VirtIfAreaId, 
                fsMIStdOspfv3VirtIfNeighbor } 
      ::= { fsMIStdOspfv3VirtIfTable 1 } 

FsMIStdOspfv3VirtIfEntry ::= SEQUENCE { 
        fsMIStdOspfv3VirtIfAreaId 
                AreaID, 
        fsMIStdOspfv3VirtIfNeighbor 
                RouterID, 
        fsMIStdOspfv3VirtIfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3VirtIfTransitDelay 
                UpToRefreshInterval, 
        fsMIStdOspfv3VirtIfRetransInterval 
                UpToRefreshInterval, 
        fsMIStdOspfv3VirtIfHelloInterval 
                HelloRange, 
        fsMIStdOspfv3VirtIfRtrDeadInterval 
                 RouterDeadRange, 
        fsMIStdOspfv3VirtIfState 
                INTEGER, 
        fsMIStdOspfv3VirtIfEvents 
                Counter32, 
        fsMIStdOspfv3VirtIfLinkScopeLsaCount 
                Gauge32, 
        fsMIStdOspfv3VirtIfLinkLsaCksumSum 
                Integer32, 
        fsMIStdOspfv3VirtIfStatus 
                RowStatus 
        } 

    fsMIStdOspfv3VirtIfAreaId OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The  Transit  Area  that  the   Virtual   Link 
            traverses.  By definition, this is not 0.0.0.0" 
      ::= { fsMIStdOspfv3VirtIfEntry 1 } 

    fsMIStdOspfv3VirtIfNeighbor OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The Router ID of the Virtual Neighbor." 
      ::= { fsMIStdOspfv3VirtIfEntry 2 } 

    fsMIStdOspfv3VirtIfIndex OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The interface ID assigned to this OSPFv3 virtual 
            interface. It is advertised in Hello's sent over 
            the virtal link and in the router's router-LSAs." 
      ::= { fsMIStdOspfv3VirtIfEntry 3 } 

    fsMIStdOspfv3VirtIfTransitDelay OBJECT-TYPE 
        SYNTAX          UpToRefreshInterval 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The estimated number of seconds  it  takes  to 
            transmit  a link- state update packet over this 
            interface." 
        DEFVAL          { 1 } 
       ::= { fsMIStdOspfv3VirtIfEntry 4 } 

    fsMIStdOspfv3VirtIfRetransInterval OBJECT-TYPE 
        SYNTAX          UpToRefreshInterval 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The number of seconds between  link-state  ad- 
            vertisement  retransmissions,  for  adjacencies 
            belonging to this  interface.   This  value  is 
            also used when retransmitting database descrip- 
            tion  and  link-state  request  packets.   This 
            value  should  be well over the expected round- 
            trip time." 
        DEFVAL          { 5 } 
      ::= { fsMIStdOspfv3VirtIfEntry 5 } 

    fsMIStdOspfv3VirtIfHelloInterval OBJECT-TYPE 
        SYNTAX          HelloRange 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The length of time, in  seconds,  between  the 
            Hello  packets that the router sends on the in- 
            terface.  This value must be the same  for  the 
            virtual neighbor." 
        DEFVAL          { 10 } 
      ::= { fsMIStdOspfv3VirtIfEntry 6 } 

    fsMIStdOspfv3VirtIfRtrDeadInterval OBJECT-TYPE 
        SYNTAX          RouterDeadRange 
        UNITS           "seconds" 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The number of seconds that  a  router's  Hello 
            packets  have  not been seen before it's neigh- 
            bors declare the router down.  This  should  be 
            some  multiple  of  the  Hello  interval.  This 
            value must be the same for the  virtual  neigh- 
            bor." 
        DEFVAL          { 60 } 
      ::= { fsMIStdOspfv3VirtIfEntry 7 } 

    fsMIStdOspfv3VirtIfState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        down(1), -- these use the same encoding 
                        pointToPoint(4) -- as the fsMIStdOspfv3IfTable 
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "OSPF virtual interface states." 
      ::= { fsMIStdOspfv3VirtIfEntry 8 } 

    fsMIStdOspfv3VirtIfEvents OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of state changes or error events on 
            this Virtual Link" 
      ::= { fsMIStdOspfv3VirtIfEntry 9 } 

    fsMIStdOspfv3VirtIfLinkScopeLsaCount OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The total number of Link-Scope link-state 
            advertisements in  this  virtual link's link-state 
            database." 
      ::= { fsMIStdOspfv3VirtIfEntry 10 } 

    fsMIStdOspfv3VirtIfLinkLsaCksumSum OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The 32-bit unsigned sum of the Link-Scope link-state 
            advertisements'  LS  checksums  contained in this 
            virtual link's link-state database.  The sum can be used 
            to determine if  there  has been  a  change  in a 
            router's link state database, and to compare the 
            link-state database of two routers." 
      ::= { fsMIStdOspfv3VirtIfEntry 11 } 

    fsMIStdOspfv3VirtIfStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of  the  en- 
            try. The use of RowStatus is covered in more detail 
            in [6]." 
      ::= { fsMIStdOspfv3VirtIfEntry 12 } 

--      OSPFv3 Neighbor Table 

--      The OSPFv3 Neighbor Table describes all neighbors in 
--      the locality of the subject router. 

    fsMIStdOspfv3NbrTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3NbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A table of non-virtual neighbor information." 
        REFERENCE 
            "OSPF Version 2, Section 10  The  Neighbor  Data 
            Structure" 
      ::= { fsMIStdOspfv3Objects 9 } 

    fsMIStdOspfv3NbrEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3NbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The information regarding a single neighbor." 
        REFERENCE 
            "OSPF Version 2, Section 10  The  Neighbor  Data 
            Structure" 
        INDEX { fsMIStdOspfv3NbrIfIndex, 
                fsMIStdOspfv3NbrRtrId } 
      ::= { fsMIStdOspfv3NbrTable 1 } 

FsMIStdOspfv3NbrEntry ::= SEQUENCE { 
        fsMIStdOspfv3NbrIfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3NbrRtrId 
                RouterID, 
        fsMIStdOspfv3NbrAddressType 
                InetAddressType, 
        fsMIStdOspfv3NbrAddress 
                InetAddress,             
        fsMIStdOspfv3NbrOptions 
                Integer32, 
        fsMIStdOspfv3NbrPriority 
                DesignatedRouterPriority, 
        fsMIStdOspfv3NbrState 
                INTEGER, 
        fsMIStdOspfv3NbrEvents 
                Counter32, 
        fsMIStdOspfv3NbrLsRetransQLen 
                Gauge32, 
        fsMIStdOspfv3NbrHelloSuppressed 
                TruthValue, 
        fsMIStdOspfv3NbrIfId 
                InterfaceIndex, 
        fsMIStdOspfv3NbrRestartHelperStatus  
                INTEGER,  
        fsMIStdOspfv3NbrRestartHelperAge  
                UpToRefreshInterval,  
        fsMIStdOspfv3NbrRestartHelperExitReason  
                INTEGER,
        fsMIStdOspfv3NbrContextId 
                Integer32 
        } 

    fsMIStdOspfv3NbrIfIndex OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The local link ID of the link over which the 
             neighbor can be reached." 
      ::= { fsMIStdOspfv3NbrEntry 1 } 

    fsMIStdOspfv3NbrRtrId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A 32-bit integer (represented as a type  IpAd- 
            dress)  uniquely  identifying  the  neighboring 
            router in the Autonomous System." 
      ::= { fsMIStdOspfv3NbrEntry 2 } 

    fsMIStdOspfv3NbrAddressType OBJECT-TYPE 
        SYNTAX          InetAddressType 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The address type of fsMIStdOspfv3NbrAddress. Only IPv6 
            addresses without zone index are expected." 
      ::= { fsMIStdOspfv3NbrEntry 3 } 

    fsMIStdOspfv3NbrAddress OBJECT-TYPE 
        SYNTAX          InetAddress (SIZE (16)) 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The IPv6 address of the neighbor associated with 
            the local link." 
      ::= { fsMIStdOspfv3NbrEntry 4 } 

    fsMIStdOspfv3NbrOptions OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "A Bit Mask corresponding to the neighbor's op- 
            tions field." 
        REFERENCE 
            "OSPF Version 3, Appendix A.2 the Options field" 
      ::= { fsMIStdOspfv3NbrEntry 5 } 

    fsMIStdOspfv3NbrPriority OBJECT-TYPE 
        SYNTAX          DesignatedRouterPriority 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The priority of this neighbor in the designat- 
            ed router election algorithm.  The value 0 sig- 
            nifies that the neighbor is not eligible to be- 
            come  the  designated router on this particular 
            network." 
      ::= { fsMIStdOspfv3NbrEntry 6 } 

    fsMIStdOspfv3NbrState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        down(1), 
                        attempt(2), 
                        init(3), 
                        twoWay(4), 
                        exchangeStart(5), 
                        exchange(6), 
                        loading(7), 
                        full(8) 
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The State of the relationship with this Neigh- 
            bor." 
        REFERENCE 
            "OSPF Version 2, Section 10.1 Neighbor States" 
      ::= { fsMIStdOspfv3NbrEntry 7 } 

    fsMIStdOspfv3NbrEvents OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of times this neighbor relationship 
            has changed state, or an error has occurred." 
      ::= { fsMIStdOspfv3NbrEntry 8 } 

    fsMIStdOspfv3NbrLsRetransQLen OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The  current  length  of  the   retransmission 
            queue." 
      ::= { fsMIStdOspfv3NbrEntry 9 } 

    fsMIStdOspfv3NbrHelloSuppressed OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Indicates whether Hellos are being  suppressed 
            to the neighbor" 
      ::= { fsMIStdOspfv3NbrEntry 10 } 

    fsMIStdOspfv3NbrIfId OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The interface ID that the neighbor advertises 
            in its Hello Packets on this link, that is, the 
            neighbor's local interface index." 
      ::= { fsMIStdOspfv3NbrEntry 11 } 

    fsMIStdOspfv3NbrRestartHelperStatus OBJECT-TYPE  
       SYNTAX       INTEGER { notHelping (1),  
                              helping (2)  
                            }  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
          "Indicates whether the router is acting  
          as a hitless restart helper for the neighbor."  
      ::= { fsMIStdOspfv3NbrEntry 12 }  
    
    fsMIStdOspfv3NbrRestartHelperAge OBJECT-TYPE  
       SYNTAX       UpToRefreshInterval 
       UNITS        "seconds"  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
          "Remaining time in current OSPF hitless restart  
          interval, if the router is acting as a restart  
          helper for the neighbor."  
      ::= { fsMIStdOspfv3NbrEntry 13 }  
    
    fsMIStdOspfv3NbrRestartHelperExitReason OBJECT-TYPE  
       SYNTAX       INTEGER { none (1),           -- not attempted  
                              inProgress (2),     -- restart in  
                                                  -- progress  
                              completed (3),      -- successfully  
                                                  -- completed  
                              timedOut (4),       -- timed out  
                              topologyChanged (5) -- aborted due to  
                                                  -- topology  
                                                  -- change.  
                            }  
       MAX-ACCESS   read-only  
       STATUS       current  
       DESCRIPTION  
          "Describes the outcome of the last attempt at acting  
           as a hitless restart helper for the neighbor."  
      ::= { fsMIStdOspfv3NbrEntry 14 } 

    fsMIStdOspfv3NbrContextId OBJECT-TYPE
        SYNTAX          Integer32
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "A 32-bit unique context id for each entry. 
             Minimum value is 0 and Maximum depends upon system 
             configuration. Default value is 0 which will be initialized 
             during bootup"
      ::= { fsMIStdOspfv3NbrEntry 15 }

--      OSPFv3 NBMA Neighbor Table 

--      The OSPFv3 NBMA Neighbor Table describes all configured 
--      NBMA neighbors and neighbors dynamically discovered by 
--      lower-level protocols such as Inverse Neighbor Discovery. 

    fsMIStdOspfv3NbmaNbrTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3NbmaNbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A table of configured non-virtual neighbor 
            information and neighbors dynamically discovered 
            by lower-level protocols such as Inverse Neighbor 
            Discovery." 
        REFERENCE 
            "OSPF Version 2, Section 10  The  Neighbor  Data 
            Structure" 
      ::= { fsMIStdOspfv3Objects 10 } 

    fsMIStdOspfv3NbmaNbrEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3NbmaNbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The information regarding a single configured 
            neighbor or neighbor discovered by lower-level 
            protocols such as Inverse Neighbor Discovery." 
        REFERENCE 
            "OSPF Version 2, Section 10  The  Neighbor  Data 
            Structure" 
        INDEX { fsMIStdOspfv3NbmaNbrIfIndex, 
                fsMIStdOspfv3NbmaNbrAddressType, 
                fsMIStdOspfv3NbmaNbrAddress } 
      ::= { fsMIStdOspfv3NbmaNbrTable 1 } 

FsMIStdOspfv3NbmaNbrEntry ::= SEQUENCE { 
        fsMIStdOspfv3NbmaNbrIfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3NbmaNbrAddressType 
                InetAddressType, 
        fsMIStdOspfv3NbmaNbrAddress 
                InetAddress, 
        fsMIStdOspfv3NbmaNbrPriority 
                DesignatedRouterPriority, 
        fsMIStdOspfv3NbmaNbrRtrId 
                RouterID, 
        fsMIStdOspfv3NbmaNbrState 
                INTEGER, 
        fsMIStdOspfv3NbmaNbrStorageType 
                StorageType, 
        fsMIStdOspfv3NbmaNbrContextId
                Integer32, 
        fsMIStdOspfv3NbmaNbrStatus 
                RowStatus 
        } 

    fsMIStdOspfv3NbmaNbrIfIndex OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The local link ID of the link over which the 
             neighbor can be reached." 
      ::= { fsMIStdOspfv3NbmaNbrEntry 1 } 

    fsMIStdOspfv3NbmaNbrAddressType OBJECT-TYPE 
        SYNTAX          InetAddressType 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The address type of fsMIStdOspfv3NbrAddress. Only IPv6 
            addresses without zone index are expected." 
      ::= { fsMIStdOspfv3NbmaNbrEntry 2 } 

    fsMIStdOspfv3NbmaNbrAddress OBJECT-TYPE 
        SYNTAX          InetAddress (SIZE (16)) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The IPv6 address of the neighbor associated with 
            the local link." 
      ::= { fsMIStdOspfv3NbmaNbrEntry 3 } 

    fsMIStdOspfv3NbmaNbrPriority OBJECT-TYPE 
        SYNTAX          DesignatedRouterPriority 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The priority of this neighbor in the designat- 
            ed router election algorithm. The value 0 sig- 
            nifies that the neighbor is not eligible to be- 
            come  the  designated router on this particular 
            network." 
        DEFVAL          { 1 } 
      ::= { fsMIStdOspfv3NbmaNbrEntry 4 } 

    fsMIStdOspfv3NbmaNbrRtrId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "A 32-bit integer (represented as a type IpAd- 
            dress) uniquely identifying the neighboring 
            router in the Autonomous System. A value of 
            0.0.0.0 is returned until a Hello is received 
            from the configured neighbor." 
      ::= { fsMIStdOspfv3NbmaNbrEntry 5 } 

    fsMIStdOspfv3NbmaNbrState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        down(1), 
                        attempt(2), 
                        init(3), 
                        twoWay(4), 
                        exchangeStart(5), 
                        exchange(6), 
                        loading(7), 
                        full(8) 
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The State of the relationship with this Neigh- 
            bor." 
        REFERENCE 
            "OSPF Version 2, Section 10.1 Neighbor States" 
      ::= { fsMIStdOspfv3NbmaNbrEntry 6 } 

    fsMIStdOspfv3NbmaNbrStorageType OBJECT-TYPE 
        SYNTAX          StorageType 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "The storage type for this conceptual row. 
            Conceptual rows having the value 'permanent' need not 
            allow write-access to any columnar objects in the row. 
            Manually configured entries will have a storage type 
            of nonVolatile while entries dynamically created as a 
            result of a lower-level protocol such as Inverse 
            Neighbor Discovery will have a storage type of 
            volatile." 
        DEFVAL          { nonVolatile } 
      ::= { fsMIStdOspfv3NbmaNbrEntry 7 } 

    fsMIStdOspfv3NbmaNbrContextId OBJECT-TYPE
        SYNTAX          Integer32
	    MAX-ACCESS      read-only
	    STATUS          current
	    DESCRIPTION
	        "A 32-bit unique context id for each entry. 
             Minimum value is 0 and Maximum depends upon system 
             configuration. Default value is 0 which will be initialized 
             during bootup"
      ::= { fsMIStdOspfv3NbmaNbrEntry 8 }

    fsMIStdOspfv3NbmaNbrStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of the en- 
            try. The use of RowStatus is covered in more detail 
            in [6]." 
      ::= { fsMIStdOspfv3NbmaNbrEntry 9 } 

--      OSPFv3 Virtual Neighbor Table 

--      This table describes all virtual neighbors. 
--      Since Virtual Links are configured in the 
--      virtual interface table, this table is read-only. 

    fsMIStdOspfv3VirtNbrTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3VirtNbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A table of virtual neighbor information." 
        REFERENCE 
            "OSPF Version 2, Section 15 Virtual Links" 
      ::= { fsMIStdOspfv3Objects 11 } 

    fsMIStdOspfv3VirtNbrEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3VirtNbrEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "Virtual neighbor information." 
        INDEX { fsMIStdOspfv3ContextId,
	        fsMIStdOspfv3VirtNbrArea, 
                fsMIStdOspfv3VirtNbrRtrId } 
      ::= { fsMIStdOspfv3VirtNbrTable 1 } 

FsMIStdOspfv3VirtNbrEntry ::= SEQUENCE { 
        fsMIStdOspfv3VirtNbrArea 
                AreaID, 
        fsMIStdOspfv3VirtNbrRtrId 
                RouterID, 
        fsMIStdOspfv3VirtNbrIfIndex 
                InterfaceIndex, 
        fsMIStdOspfv3VirtNbrAddressType 
                InetAddressType, 
        fsMIStdOspfv3VirtNbrAddress 
                InetAddress, 
        fsMIStdOspfv3VirtNbrOptions 
                Integer32, 
        fsMIStdOspfv3VirtNbrState 
                INTEGER, 
        fsMIStdOspfv3VirtNbrEvents 
                Counter32, 
        fsMIStdOspfv3VirtNbrLsRetransQLen 
                Gauge32, 
        fsMIStdOspfv3VirtNbrHelloSuppressed 
                TruthValue, 
        fsMIStdOspfv3VirtNbrIfId 
                InterfaceIndex, 
        fsMIStdOspfv3VirtNbrRestartHelperStatus  
                INTEGER,  
        fsMIStdOspfv3VirtNbrRestartHelperAge  
                UpToRefreshInterval,  
        fsMIStdOspfv3VirtNbrRestartHelperExitReason  
                INTEGER 
        } 

    fsMIStdOspfv3VirtNbrArea OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The Transit Area Identifier." 
      ::= { fsMIStdOspfv3VirtNbrEntry 1 } 

    fsMIStdOspfv3VirtNbrRtrId OBJECT-TYPE 
        SYNTAX          RouterID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A  32-bit  integer  uniquely  identifying  the 
            neighboring router in the Autonomous System." 
      ::= { fsMIStdOspfv3VirtNbrEntry 2 } 

    fsMIStdOspfv3VirtNbrIfIndex OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The local interface ID for the virtual link over 
            which the neighbor can be reached." 
      ::= { fsMIStdOspfv3VirtNbrEntry 3 } 

    fsMIStdOspfv3VirtNbrAddressType OBJECT-TYPE 
        SYNTAX          InetAddressType 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The address type of fsMIStdOspfv3VirtNbrAddress. Only IPv6 
            addresses without zone index are expected." 
      ::= { fsMIStdOspfv3VirtNbrEntry 4 } 

    fsMIStdOspfv3VirtNbrAddress OBJECT-TYPE 
        SYNTAX          InetAddress (SIZE (16)) 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The IPv6 address advertised by this Virtual Neighbor. 
            It must be a Site-Local or Global scope address." 
      ::= { fsMIStdOspfv3VirtNbrEntry 5 } 

    fsMIStdOspfv3VirtNbrOptions OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "A Bit Mask corresponding to the neighbor's op- 
            tions field." 
        REFERENCE 
            "OSPF Version 3, Appendix A.2 the Options field" 
      ::= { fsMIStdOspfv3VirtNbrEntry 6 } 

    fsMIStdOspfv3VirtNbrState OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        down(1), 
                        attempt(2), 
                        init(3), 
                        twoWay(4), 
                        exchangeStart(5), 
                        exchange(6), 
                        loading(7), 
                        full(8) 
                        } 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The state of the Virtual Neighbor Relation- 
            ship." 
      ::= { fsMIStdOspfv3VirtNbrEntry 7 } 

    fsMIStdOspfv3VirtNbrEvents OBJECT-TYPE 
        SYNTAX          Counter32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The number of  times  this  virtual  link  has 
            changed its state, or an error has occurred." 
      ::= { fsMIStdOspfv3VirtNbrEntry 8 } 

    fsMIStdOspfv3VirtNbrLsRetransQLen OBJECT-TYPE 
        SYNTAX          Gauge32 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The  current  length  of  the   retransmission 
            queue." 
      ::= { fsMIStdOspfv3VirtNbrEntry 9 } 

    fsMIStdOspfv3VirtNbrHelloSuppressed OBJECT-TYPE 
        SYNTAX          TruthValue 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "Indicates whether Hellos are being  suppressed 
            to the neighbor" 
      ::= { fsMIStdOspfv3VirtNbrEntry 10 } 

    fsMIStdOspfv3VirtNbrIfId OBJECT-TYPE 
        SYNTAX          InterfaceIndex 
        MAX-ACCESS      read-only 
        STATUS          current 
        DESCRIPTION 
            "The interface ID that the neighbor advertises 
            in its Hello Packets on this virtual link, that is, 
            the neighbor's local interface ID." 
      ::= { fsMIStdOspfv3VirtNbrEntry 11 } 

    fsMIStdOspfv3VirtNbrRestartHelperStatus OBJECT-TYPE  
        SYNTAX       INTEGER { notHelping (1),  
                               helping (2)  
                             }  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
           "Indicates whether the router is acting  
           as a hitless restart helper for the neighbor."  
      ::= { fsMIStdOspfv3VirtNbrEntry 12 }  
    
    fsMIStdOspfv3VirtNbrRestartHelperAge OBJECT-TYPE  
        SYNTAX       UpToRefreshInterval 
        UNITS        "seconds"  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
           "Remaining time in current OSPF hitless restart  
           interval, if the router is acting as a restart  
           helper for the neighbor."  
      ::= { fsMIStdOspfv3VirtNbrEntry 13 }  
    
    fsMIStdOspfv3VirtNbrRestartHelperExitReason OBJECT-TYPE  
        SYNTAX       INTEGER { none (1),           -- not attempted  
                               inProgress (2),     -- restart in  
                                                   -- progress  
                               completed (3),      -- successfully  
                                                   -- completed  
                               timedOut (4),       -- timed out  
                               topologyChanged (5) -- aborted due to  
                                                   -- topology  
                                                   -- change.  
                             }  
        MAX-ACCESS   read-only  
        STATUS       current  
        DESCRIPTION  
           "Describes the outcome of the last attempt at acting  
            as a hitless restart helper for the neighbor."  
      ::= { fsMIStdOspfv3VirtNbrEntry 14 } 


-- 
--      The OSPFv3 Area Aggregate Table 
-- 

    fsMIStdOspfv3AreaAggregateTable OBJECT-TYPE 
        SYNTAX          SEQUENCE OF FsMIStdOspfv3AreaAggregateEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A range of IPv6 prefixes specified by a 
            prefix/prefix length  pair. Note that if 
            ranges are configured such that one range sub- 
            sumes  another range the most specific match is 
            the preferred one." 
      ::= { fsMIStdOspfv3Objects 12 } 

    fsMIStdOspfv3AreaAggregateEntry OBJECT-TYPE 
        SYNTAX          FsMIStdOspfv3AreaAggregateEntry 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "A range of IPv6 prefixes specified by a 
            prefix/prefix length  pair. Note that if 
            ranges are configured such that one range sub- 
            sumes  another range the most specific match is 
            the preferred one." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2  Area parameters" 
        INDEX { fsMIStdOspfv3ContextId,
	        fsMIStdOspfv3AreaAggregateAreaID,  
                fsMIStdOspfv3AreaAggregateAreaLsdbType, 
                fsMIStdOspfv3AreaAggregatePrefixType, 
                fsMIStdOspfv3AreaAggregatePrefix, 
                fsMIStdOspfv3AreaAggregatePrefixLength } 
      ::= { fsMIStdOspfv3AreaAggregateTable 1 } 

FsMIStdOspfv3AreaAggregateEntry ::= SEQUENCE { 
        fsMIStdOspfv3AreaAggregateAreaID 
                AreaID, 
        fsMIStdOspfv3AreaAggregateAreaLsdbType 
                INTEGER, 
        fsMIStdOspfv3AreaAggregatePrefixType 
                InetAddressType, 
        fsMIStdOspfv3AreaAggregatePrefix 
                InetAddress, 
        fsMIStdOspfv3AreaAggregatePrefixLength 
                InetAddressPrefixLength, 
        fsMIStdOspfv3AreaAggregateEffect 
                INTEGER, 
        fsMIStdOspfv3AreaAggregateRouteTag 
                Integer32, 
        fsMIStdOspfv3AreaAggregateStatus 
                RowStatus 
        } 

    fsMIStdOspfv3AreaAggregateAreaID OBJECT-TYPE 
        SYNTAX          AreaID 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The Area the Address Aggregate is to be  found 
            within." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3AreaAggregateEntry 1 } 

    fsMIStdOspfv3AreaAggregateAreaLsdbType OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        interAreaPrefixLsa(8195), -- 0x2003 
                        nssaExternalLsa(8199)     -- 0x2007 
                        } 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The type of the Address Aggregate.  This field 
            specifies  the  Area Lsdb type that this Address Ag- 
            gregate applies to." 
        REFERENCE 
            "OSPF Version 2, Appendix A.4.1 The  Link  State 
            Advertisement header" 
      ::= { fsMIStdOspfv3AreaAggregateEntry 2 } 

    fsMIStdOspfv3AreaAggregatePrefixType OBJECT-TYPE 
        SYNTAX          InetAddressType 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The prefix type of fsMIStdOspfv3AreaAggregatePrefix. Only 
            IPv6 addresses are expected." 
      ::= { fsMIStdOspfv3AreaAggregateEntry 4 } 

    fsMIStdOspfv3AreaAggregatePrefix OBJECT-TYPE 
        SYNTAX          InetAddress (SIZE (0..16)) 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The IPv6 Prefix." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3AreaAggregateEntry 5 } 

    fsMIStdOspfv3AreaAggregatePrefixLength OBJECT-TYPE 
        SYNTAX          InetAddressPrefixLength (3..128) 
        UNITS           "bits" 
        MAX-ACCESS      not-accessible 
        STATUS          current 
        DESCRIPTION 
            "The length of the prefix (in bits). A prefix can 
            not be shorter than 3 bits." 
        REFERENCE 
            "OSPF Version 2, Appendix C.2 Area parameters" 
      ::= { fsMIStdOspfv3AreaAggregateEntry 6 } 

    fsMIStdOspfv3AreaAggregateEffect OBJECT-TYPE 
        SYNTAX          INTEGER { 
                        advertiseMatching(1), 
                        doNotAdvertiseMatching(2) 
                        } 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "Prefixes subsumed by ranges either trigger  the 
            advertisement  of  the indicated aggregate (ad- 
            vertiseMatching), or result in the prefix not 
            being advertised at all outside the area." 
        DEFVAL          { advertiseMatching } 
      ::= { fsMIStdOspfv3AreaAggregateEntry 7 } 

    fsMIStdOspfv3AreaAggregateRouteTag OBJECT-TYPE 
        SYNTAX          Integer32 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This tag is advertised only in the summarized 
             As-External LSA when summarizing from type-7 to  
             type-5." 
        DEFVAL         { 0 } 
      ::= { fsMIStdOspfv3AreaAggregateEntry 8 } 
         
    fsMIStdOspfv3AreaAggregateStatus OBJECT-TYPE 
        SYNTAX          RowStatus 
        MAX-ACCESS      read-create 
        STATUS          current 
        DESCRIPTION 
            "This variable controls the status of  the  en- 
            try. The use of RowStatus is covered in more detail 
            in [6]." 
      ::= { fsMIStdOspfv3AreaAggregateEntry 9 } 

END 
