-- Copyright (C) 2009-2012 Aricent Group . All Rights Reserved

-- $Id: fsradext.mib,v 1.1 2015/04/28 12:25:01 siva Exp $

-- ****************************************************************************
-- *                         Document Version Info                            *
-- ****************************************************************************
-- *Version |    Date        |   Author             |        Changes          *
-- * ------------------------------------------------------------------------ *
-- * 1.1    |  4thAug 2009   | Private              |fsradius.mib, radauth.mib*
-- *        |                |                      |radacc.mib extended for  *
-- *        |                |                      |IPv6 support             *
-- *        |                |                      |	 		              *
-- ****************************************************************************

-- RADIUS-CLIENT-MIB DEFINITIONS ::= BEGIN


ARICENT-RADIUS-EXT-MIB DEFINITIONS ::= BEGIN

 IMPORTS
     MODULE-IDENTITY, OBJECT-TYPE,
     Counter32, Gauge32, TimeTicks,
     Integer32, enterprises           FROM SNMPv2-SMI
     DisplayString, RowStatus         FROM SNMPv2-TC
     SnmpAdminString                  FROM SNMP-FRAMEWORK-MIB
     InetAddressType, InetAddress     FROM INET-ADDRESS-MIB;


 futureRADIUSEXTMIB MODULE-IDENTITY
    LAST-UPDATED "201209050000Z"
    ORGANIZATION "ARICENT COMMUNICATIONS SOFTWARE"
    CONTACT-INFO "support@aricent.com"
	DESCRIPTION "MIB for Radius. Extended for Ipv6 Support"
	REVISION "201209050000Z"
	DESCRIPTION "MIB for Radius. Extended for Ipv6 Support"
         ::= { enterprises  aricent-communication-holding-ltd(29601) iss(2) 30 }



fsRadExtClient           OBJECT IDENTIFIER ::= { futureRADIUSEXTMIB 1 }

-- ---------------------------------------------------------- -- 
-- ---------------------------------------------------------- -- 
-- groups in the RADIUS EXTENDED MIB 
-- ---------------------------------------------------------- -- 
 
     fsRadExtServer        OBJECT IDENTIFIER ::= { fsRadExtClient 1 } 
     fsRadAuthClient       OBJECT IDENTIFIER ::= { fsRadExtClient 2 } 
     fsRadAccClient        OBJECT IDENTIFIER ::= { fsRadExtClient 3 } 
 
-- ---------------------------------------------------------- -- 

fsRadExtDebugMask OBJECT-TYPE
      SYNTAX Integer32
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
        "This object is used to enable Trace Statements in  
        Radius Module. 

        A FOUR BYTE integer is used for enabling the level of tracing.  
        Each BIT in the four byte integer, represents a particular  
        level of Trace.  

        The maping between the bit positions & the level of trace is  
        as follows:  
        0 - Error Traces 
        1 - Event Traces 
        2 - Packet Traces 
        3 - Response Traces 
        4 - Timer Traces 

        The remaining bits are unused. Combination of levels are  
        also allowed. 

        For example if the bits 0 and 1 are set, then the Trace 
        statements related to Error and Event
        will be printed. 

        The user has to enter the corresponding INTEGER VALUE for the 
        bits set. For example if bits 0 and 1 are set then user has to  
        give the value 3." 
 
      ::= { fsRadExtServer 1 }

fsRadExtMaxNoOfUserEntries OBJECT-TYPE
      SYNTAX Integer32 (1 ..100)
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
     "Maximum of No of User entries stored. The value of this
	 object will be stored for the MemPool Initialization."
      ::= { fsRadExtServer 2 }
      
fsRadExtPrimaryServerAddressType OBJECT-TYPE
   SYNTAX      InetAddressType
   MAX-ACCESS  read-write 
   STATUS      current
   DESCRIPTION
   "The address type of active server.This can be Ipv4 or Ipv6."
      ::= { fsRadExtServer 3 }


fsRadExtPrimaryServer   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE(16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured
      in fsRadExtServerEntry. This object indicates the primary server 
      among those 5 servers. The RADIUS client will first try to interact 
      with the server mentioned in this object. Other servers are 
      approached only if this server is not reachable. Setting this 
      object to zero disables the primary server concept."
      ::= { fsRadExtServer 4 }

fsRadExtServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RadExtServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The (conceptual) table that lists the RADIUS servers with
         which the client shares a secret."
    ::=  { fsRadExtServer 5 }

fsRadExtServerEntry OBJECT-TYPE
    SYNTAX RadExtServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "An entry (conceptual row) representing a RADIUS server
                 with which the client shares a secret."
    INDEX {fsRadExtServerIndex}
    ::=  { fsRadExtServerTable 1 }

RadExtServerEntry ::= SEQUENCE {
    fsRadExtServerIndex    Integer32,
    fsRadExtServerAddrType    InetAddressType,
    fsRadExtServerAddress   InetAddress,
    fsRadExtServerType    INTEGER,
    fsRadExtServerSharedSecret    DisplayString,
    fsRadExtServerEnabled    INTEGER,
    fsRadExtServerResponseTime Integer32,
    fsRadExtServerMaximumRetransmission  Integer32,
    fsRadExtServerEntryStatus		RowStatus
   }


fsRadExtServerIndex OBJECT-TYPE
    SYNTAX Integer32 (1..5)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This object enumerates the order in which the server should
         be contacted.Index 1 is contacted first if the primary server
         specified by fsRadExtPrimaryServer is not configured"
    ::=  { fsRadExtServerEntry 1 }
    
fsRadExtServerAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
       "The type of IP address to be configured for the RADIUS server.
        While other types of addresses are defined in the InetAddressType
        textual convention, like DNS names, this object is limited to IPv4
        and IPv6 addresses."
    ::= { fsRadExtServerEntry 2 }


fsRadExtServerAddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The IP address(Ipv4 or Ipv6) of the RADIUS server
         referred to in fsRadExtServerTable entry."
    ::=  { fsRadExtServerEntry 3 }

fsRadExtServerType OBJECT-TYPE
    SYNTAX INTEGER { auth (1),
                     acct (2),
                     both (3)
                   }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The RADIUS server type (Authentication or Accounting or Both).
         For creating a server entry, the Server Type should be set"
    ::=  { fsRadExtServerEntry 4 }

fsRadExtServerSharedSecret OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The secret string which is shared between the Server and the 
        Client"
    ::=  { fsRadExtServerEntry 5 }

fsRadExtServerEnabled OBJECT-TYPE
    SYNTAX INTEGER { enabled (1),
                     disabled (2),
                     destroy (3)
                   }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "This object informs whether the server is active or inactive"
    DEFVAL { enabled }
    ::=  { fsRadExtServerEntry 6 }

fsRadExtServerResponseTime OBJECT-TYPE
    SYNTAX Integer32  (1 ..120)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The maximum time within which the server has to respond for a
         request from the client."
    ::=  { fsRadExtServerEntry 7 }

fsRadExtServerMaximumRetransmission OBJECT-TYPE
    SYNTAX Integer32  (1 ..254)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "The allowed maximum number of trials to be tried by a client to get
         the response from the server for a request"
    ::=  { fsRadExtServerEntry 8 }

fsRadExtServerEntryStatus	OBJECT-TYPE
   SYNTAX    			RowStatus
   MAX-ACCESS 			read-write
   STATUS 			current
   DESCRIPTION
      "The status of the entry can be used as specified in the SNMP V2
      standard. "
  ::=  {   fsRadExtServerEntry 9  }
  
-- ---------------------------------------------------------- --
-- The Radius Authentication Group
-- ---------------------------------------------------------- --
-- The group for entities implementing the client
-- side of the Remote Access Dial in User Service (RADIUS)
-- authentication protocol.

fsRadExtAuthClientInvalidServerAddresses OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Response packets
             received from unknown addresses."
      ::=  { fsRadAuthClient 1 }

fsRadExtAuthClientIdentifier OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
             "The NAS-Identifier of the RADIUS authentication client.
              This is not necessarily the same as sysName in MIB II."
      ::=  { fsRadAuthClient 2 }

fsRadExtAuthServerTable OBJECT-TYPE
      SYNTAX     SEQUENCE OF RadiusAuthServerEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "The (conceptual) table taht lists the RADIUS authentication
             servers with which the client shares a secret."
      ::=  { fsRadAuthClient 3 }

fsRadExtAuthServerEntry OBJECT-TYPE
      SYNTAX     RadiusAuthServerEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "An entry (conceptual row) that represents a RADIUS
             authentication server with which the client shares
             a secret."
      INDEX      { fsRadExtAuthServerIndex }
      ::= { fsRadExtAuthServerTable 1 }

RadiusAuthServerEntry ::= SEQUENCE {
      fsRadExtAuthServerIndex                           Integer32,
      fsRadExtAuthServerAddressType               InetAddressType,
      fsRadExtAuthServerAddress                       InetAddress,
      fsRadExtAuthClientServerPortNumber                Integer32,
      fsRadExtAuthClientRoundTripTime                   TimeTicks,
      fsRadExtAuthClientAccessRequests                  Counter32,
      fsRadExtAuthClientAccessRetransmissions           Counter32,
      fsRadExtAuthClientAccessAccepts                   Counter32,
      fsRadExtAuthClientAccessRejects                   Counter32,
      fsRadExtAuthClientAccessChallenges                Counter32,
      fsRadExtAuthClientMalformedAccessResponses        Counter32,
      fsRadExtAuthClientBadAuthenticators               Counter32,
      fsRadExtAuthClientPendingRequests                   Gauge32,
      fsRadExtAuthClientTimeouts                        Counter32,
      fsRadExtAuthClientUnknownTypes                    Counter32,
      fsRadExtAuthClientPacketsDropped                  Counter32
}

fsRadExtAuthServerIndex OBJECT-TYPE
      SYNTAX     Integer32 (1..2147483647)
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
             "A number that uniquely idenfifies each RADIUS
             Authentication server with which the client
             communicates."
      ::= { fsRadExtAuthServerEntry 1 }
      
fsRadExtAuthServerAddressType OBJECT-TYPE
      SYNTAX     InetAddressType
      MAX-ACCESS read-only
      STATUS     current
      DESCRIPTION
            "The address type (IPv4 or IPv6) of the RADIUS authentication 
            server referred to in the fsRadExtAuthServerTable entry."
      ::= { fsRadExtAuthServerEntry 2 }


fsRadExtAuthServerAddress OBJECT-TYPE
      SYNTAX     InetAddress
      MAX-ACCESS read-only
      STATUS     current
      DESCRIPTION
            "The IP address (Ipv4 or Ipv6) of the RADIUS authentication 
            server referred to in this table entry."
      ::= { fsRadExtAuthServerEntry 3 }

fsRadExtAuthClientServerPortNumber  OBJECT-TYPE
      SYNTAX Integer32 (0..65535)
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
            "The UDP port that the client uses to send requests to
             this server."
      ::= { fsRadExtAuthServerEntry 4 }

fsRadExtAuthClientRoundTripTime  OBJECT-TYPE
      SYNTAX TimeTicks
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The time interval (in hundredths of a second) between
             the most recent Access-Reply/Access-Challenge and the
             Access-Request that that matches with the 
             Access-Reply/Access-Challengeit from the RADIUS
             authentication server."
      ::= { fsRadExtAuthServerEntry 5 }
      
-- Request/Response statistics
--
-- TotalIncomingPackets = Accepts + Rejects + Challenges + UnknownTypes
--
-- TotalIncomingPackets - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received
--
-- AccessRequests + PendingRequests + ClientTimeouts =
-- Successfully Received
--
--

fsRadExtAuthClientAccessRequests OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Request packets sent
             to this server. This does not include retransmissions."
      ::= { fsRadExtAuthServerEntry 6 }

fsRadExtAuthClientAccessRetransmissions OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Request packets
             retransmitted to this RADIUS authentication server."
      ::= { fsRadExtAuthServerEntry 7 }

fsRadExtAuthClientAccessAccepts OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Accept packets
             (valid or invalid) received from this server."
      ::= { fsRadExtAuthServerEntry 8 }

fsRadExtAuthClientAccessRejects OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Reject packets
             (valid or invalid) received from this server."
      ::= { fsRadExtAuthServerEntry  9 }

fsRadExtAuthClientAccessChallenges OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Challenge packets
             (valid or invalid) received from this server."
      ::= { fsRadExtAuthServerEntry 10 }

-- "Access-Response" includes an Access-Accept, Access-Challenge
-- or Access-Reject

fsRadExtAuthClientMalformedAccessResponses OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of malformed RADIUS Access-Response
             packets received from this server.
             Malformed packets include packets with
             an invalid length. Bad authenticators or
             Signature attributes or unknown types are not
             included as malformed access responses."
      ::= { fsRadExtAuthServerEntry 11 }

fsRadExtAuthClientBadAuthenticators OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Response packets
             containing invalid authenticators or Signature
             attributes received from this server."
      ::= { fsRadExtAuthServerEntry 12 }

fsRadExtAuthClientPendingRequests OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Access-Request packets
             destined for this server, which have not yet timed out
             or received a response. This variable is incremented
             when an Access-Request is sent and is decremented due to
             receipt of an Access-Accept, Access-Reject or
             Access-Challenge, a timeout or retransmission."
      ::= { fsRadExtAuthServerEntry 13 }

fsRadExtAuthClientTimeouts OBJECT-TYPE
     SYNTAX Counter32
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
            "The number of authentication timeouts to this server.
             After the entry timeout the client may retry to the same
             server, send to a different server, or
             give up. Retry to the same server is counted as a
             retransmit as well as a timeout. Send to a different
             server is counted as a Request as well as a timeout."
      ::= { fsRadExtAuthServerEntry  14 }

fsRadExtAuthClientUnknownTypes OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets of unknown type, which
             were received from this server on the authentication port."
      ::= { fsRadExtAuthServerEntry  15 }

fsRadExtAuthClientPacketsDropped OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets, which were
             received from this server on the authentication port
             and dropped for some other reason."
      ::= { fsRadExtAuthServerEntry  16 }
      
      
-- ---------------------------------------------------------- --
-- The Radius Accounting Group
-- ---------------------------------------------------------- --
-- The group for entities implementing the client side of
-- the Remote Access Dialin User Service (RADIUS) accounting
-- protocol.




fsRadExtAccClientInvalidServerAddresses OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Response packets
             received from unknown addresses."
      ::=  { fsRadAccClient 1 }

fsRadExtAccClientIdentifier OBJECT-TYPE
      SYNTAX SnmpAdminString
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The NAS-Identifier of the RADIUS accounting client. This
             is not necessarily the same as sysName in MIB II."
      ::=  { fsRadAccClient 2 }

fsRadExtAccServerTable OBJECT-TYPE
      SYNTAX SEQUENCE OF RadiusAccServerEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "The (conceptual) table that lists the RADIUS accounting
             servers with which the client shares a secret."
      ::=  { fsRadAccClient 3 }

fsRadExtAccServerEntry OBJECT-TYPE
      SYNTAX     RadiusAccServerEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "An entry (conceptual row) that represents a RADIUS
             accounting server with which the client shares a secret."
      INDEX      { fsRadExtAccServerIndex }
      ::= { fsRadExtAccServerTable 1 }

RadiusAccServerEntry ::= SEQUENCE {
      fsRadExtAccServerIndex                           Integer32,
      fsRadExtAccServerAddressType               InetAddressType,
      fsRadExtAccServerAddress                       InetAddress,
      fsRadExtAccClientServerPortNumber                Integer32,
      fsRadExtAccClientRoundTripTime                   TimeTicks,
      fsRadExtAccClientRequests                        Counter32,
      fsRadExtAccClientRetransmissions                 Counter32,
      fsRadExtAccClientResponses                       Counter32,
      fsRadExtAccClientMalformedResponses              Counter32,
      fsRadExtAccClientBadAuthenticators               Counter32,
      fsRadExtAccClientPendingRequests                   Gauge32,
      fsRadExtAccClientTimeouts                        Counter32,
      fsRadExtAccClientUnknownTypes                    Counter32,
      fsRadExtAccClientPacketsDropped                  Counter32
}

fsRadExtAccServerIndex OBJECT-TYPE
      SYNTAX     Integer32 (1..2147483647)
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
            "A number uniquely identifying each RADIUS
             accounting server with which this client
             communicates."
      ::= { fsRadExtAccServerEntry 1 }
      
fsRadExtAccServerAddressType OBJECT-TYPE
      SYNTAX     InetAddressType
      MAX-ACCESS read-only
      STATUS     current
      DESCRIPTION
            "The IP address type (IPv4 of IPv6) of the RADIUS accounting 
            server referred to in the fsRadExtAccServerTable entry."
      ::= { fsRadExtAccServerEntry 2 }


fsRadExtAccServerAddress OBJECT-TYPE
      SYNTAX     InetAddress
      MAX-ACCESS read-only
      STATUS     current
      DESCRIPTION
            "The IP address of the RADIUS accounting server
             referred to in this table entry."
      ::= { fsRadExtAccServerEntry 3 }

fsRadExtAccClientServerPortNumber  OBJECT-TYPE
      SYNTAX Integer32 (0..65535)
      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
            "The UDP port that the client is using to send requests to
             this server."
      ::= { fsRadExtAccServerEntry 4 }

fsRadExtAccClientRoundTripTime  OBJECT-TYPE
      SYNTAX TimeTicks
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
             "The time interval between the most recent
             Accounting-Response and the Accounting-Request 
             that matches with the Accounting-Response from
             the RADIUS accounting server."
      ::= { fsRadExtAccServerEntry 5 }

-- Request/Response statistics
--
-- Requests = Responses + PendingRequests + ClientTimeouts
--
-- Responses - MalformedResponses - BadAuthenticators -
-- UnknownTypes - PacketsDropped = Successfully received

fsRadExtAccClientRequests OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent. This does not include retransmissions."
      ::= { fsRadExtAccServerEntry 6 }

fsRadExtAccClientRetransmissions OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             retransmitted to this RADIUS accounting server.
             Retransmissions include retries where the
             Identifier and Acct-Delay have been updated, as
             well as those in which they remain the same."
      ::= { fsRadExtAccServerEntry 7 }

fsRadExtAccClientResponses OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets received on the
             accounting port from this server."
      ::= { fsRadExtAccServerEntry 8 }

fsRadExtAccClientMalformedResponses OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
             "The number of malformed RADIUS Accounting-Response
              packets received from this server. Malformed packets
             include packets with an invalid length. Bad
             authenticators and unknown types are not included as
             malformed accounting responses."
      ::= { fsRadExtAccServerEntry 9 }

fsRadExtAccClientBadAuthenticators OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Response
             packets, which contains invalid authenticators
             received from this server."
      ::= { fsRadExtAccServerEntry 10 }

fsRadExtAccClientPendingRequests OBJECT-TYPE
      SYNTAX Gauge32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS Accounting-Request packets
             sent to this server, which have not yet timed out or
             received a response. This variable is incremented when an
             Accounting-Request is sent and is decremented due to
             receipt of an Accounting-Response, a timeout or
             a retransmission."
      ::= { fsRadExtAccServerEntry 11 }

fsRadExtAccClientTimeouts OBJECT-TYPE
     SYNTAX Counter32
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION
          "The number of accounting timeouts to this server.
           After a timeout the client may retry to the same
           server, send to a different server, or give up.
           A retry to the same server is counted as a
           retransmit as well as a timeout. A send to a different
           server is counted as an Accounting-Request as well as
           a timeout."
      ::= { fsRadExtAccServerEntry  12 }

fsRadExtAccClientUnknownTypes OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets of unknown type, which 
             were received from this server on the accounting port."
      ::= { fsRadExtAccServerEntry  13 }

fsRadExtAccClientPacketsDropped OBJECT-TYPE
      SYNTAX Counter32
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
            "The number of RADIUS packets, which were received from
             this server on the accounting port and dropped for some
             other reason."
      ::= { fsRadExtAccServerEntry  14 }


END

