
BAY-STACK-NOTIFICATIONS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    NOTIFICATION-TYPE,
    OBJECT-TYPE,
    Integer32
        FROM SNMPv2-SMI
    MacAddress, DisplayString
        FROM SNMPv2-TC
    bayStackMibs
        FROM SYNOPTICS-ROOT-MIB
    dot1xAuthPaeState,
    dot1xAuthBackendAuthState
        FROM IEEE8021-PAE-MIB
    ifIndex, ifAdminStatus
        FROM IF-MIB
    InetAddressType, InetAddress
        FROM INET-ADDRESS-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    bayStackConfigExpectedStackSize,
    bayStackUnitConfigIndex
        FROM BAY-STACK-MIB
    s5ChasComType
        FROM S5-CHASSIS-MIB
    InterfaceIndex
        FROM IF-MIB
    s5AgSysUsbTargetUnit,
    s5AgentScriptStatus,
    s5AgSnmpMaxPktSize
        FROM S5-AGENT-MIB
    bseeMultiHostStatusPacpState
        FROM BAY-STACK-EAPOL-EXTENSION-MIB;

bayStackNotificationsMib    MODULE-IDENTITY
   LAST-UPDATED "201605190000Z"
   ORGANIZATION "Avaya"
   CONTACT-INFO "Avaya"
   DESCRIPTION
       "Miscellaneous NOTIFICATION definitions for BayStack products."

   REVISION "201605190000Z" -- 19 May 2016
   DESCRIPTION
       "Version 31:  Added bsnSnmpMaxPktSizeChanged."
   
   REVISION "201604010000Z" -- 1 April 2016
   DESCRIPTION
       "Version 30:  Added bsnAuditStorageAlarm"

   REVISION "201603020000Z" -- 2 March 2016
   DESCRIPTION
       "Version 29:  Added bsnEapAccessViolationExt and bsnEapRAVErrorExt"

   REVISION "201407070000Z" -- 7 July 2014
   DESCRIPTION
       "Version 28:  Added bsnAaaUserPasswordExpired"
   
   REVISION "201401270000Z" -- 27 January 2014
   DESCRIPTION
       "Version 27:  Added bsnAAAUserName,
                           bsnAaaUserAccountNotUsed, bsnAaaAlreadyConnected,
                           bsnAaaIncorrectLogOnThresholdExceeded, bsnAaaMaxNoOfSessionsExceeded,
                           bsnAuditUnsentMessages, bsnAuditRecordEventsFailure, 
                           bsnAuditStartUpTrap, bsnAuditShutDownTrap"

   REVISION "201310110000Z" -- 11 October 2013
   DESCRIPTION
       "Version 26:  Added DisplayString to IMPORTS."

   REVISION "201308220000Z" -- 22 August 2013
   DESCRIPTION
       "Version 25:  Added bsnRunScripts"

   REVISION "201303190000Z" -- 19 March 2013
   DESCRIPTION
       "Version 24:  Added bsnUSBInfo and bsnSFPInfo objects."

   REVISION "201209040000Z" -- 4 September 2012
   DESCRIPTION
       "Version 23:  Added bsnStackProtection."

   REVISION "201208220000Z" -- 22 August 2012
   DESCRIPTION
       "Version 22:  Added bsnROPasswordExpired, bsnRWPasswordExpired."

   REVISION "201208160000Z" -- 16 August 2012
   DESCRIPTION
       "Version 21:  Modified bsnLacTrunkUnavailable's description."

   REVISION "201206210000Z" -- 21 June 2012
   DESCRIPTION
       "Version 20:  Added bsnUSBInsertion, bsnUSBRemoval,
                           bsnSFPInsertion, bsnSFPRemoval."

   REVISION "201206200000Z" -- 20 June 2012
   DESCRIPTION
       "Version 19:  Added bayStackUnitConfigIndex parameter to bsnSystemUp365Days notification type."

   REVISION "201111300000Z" -- 30 November 2011
   DESCRIPTION
       "Version 18:  Added IP address related parameters to bsnEnteredForcedStackMode notification type."       
       
   REVISION "201012210000Z" -- 21 December 2010
   DESCRIPTION
       "Version 17:  Added bsnSystemUp365Days."

   REVISION "200909280000Z" -- 28 September 2009
   DESCRIPTION
       "Version 16:  Added bsnRateLimitExceeded."

   REVISION "200807090000Z" -- 09 July 2008
   DESCRIPTION
       "Version 15:  Added bsnTemperatureExceeded."

   REVISION "200803310000Z" -- 31 March 2008
   DESCRIPTION
       "Version 14:  Added bsnEnteredForcedStackModeMAC,
                           bsnEnteredForcedStackMode."

   REVISION "200703050000Z" -- 05 March 2007
   DESCRIPTION
       "Version 13:  Added bsnTrialLicenseExpirationTime,
                           bsnTrialLicenseExpirationNumber,
                           bsnTrialLicenseExpiration."

   REVISION "200604060000Z" -- 06 April 2006
   DESCRIPTION
       "Version 12:  Fix typo."

   REVISION "200604040000Z" -- 04 April 2006
   DESCRIPTION
       "Version 11:  Added bsnEapUbpFailure trap."

   REVISION "200508220000Z" -- 22 August 2005
   DESCRIPTION
       "Version 10:  Added bsnStackConfigurationError trap."

   REVISION "200506300000Z" -- 30 June 2005
   DESCRIPTION
       "Version 9:  Added additional MLT/LACP-related traps."

   REVISION "200503260000Z" -- 26 March 2005
   DESCRIPTION
       "Version 8:  Added bsnMLTHealthFailure."

   REVISION "200408060000Z" -- 06 August 2004
   DESCRIPTION
       "Version 7:  Added serialConsole(4) enumeration."

   REVISION "200408020000Z" -- 02 August 2004
   DESCRIPTION
       "Version 6:  Added bsnLoginFailure and associated objects."

   REVISION "200407200000Z" -- 20 July 2004
   DESCRIPTION
       "v005:  Added version info"

   REVISION "200303160000Z" -- 16 March 2003
   DESCRIPTION
       "v000:  The Initial Revision"

   ::= { bayStackMibs 2 }

bsnObjects        OBJECT IDENTIFIER ::= { bayStackNotificationsMib 1 }
bsnNotifications  OBJECT IDENTIFIER ::= { bayStackNotificationsMib 2 }
bsnNotifications0 OBJECT IDENTIFIER ::= { bsnNotifications 0 }

--
-- Notification objects
--

bsnEapAccessViolationMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The MAC address which caused an EAP access violation."
    ::= { bsnObjects 1 }

bsnLoginFailureType OBJECT-TYPE
    SYNTAX      INTEGER {
                    telnet(1),
                    ssh(2),
                    web(3),
                    serialConsole(4)
                }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The type of login being attempted when the failure occurred."
    ::= { bsnObjects 2 }

bsnLoginFailureAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The address type contained in the associated value of
         bnsLoginFailureAddress."
    ::= { bsnObjects 3 }

bsnLoginFailureAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The IP address from which the login was attempted when the
         failure occurred."
    ::= { bsnObjects 4 }

bsnLoginFailureUsername OBJECT-TYPE
    SYNTAX      SnmpAdminString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The username for which the login failure occurred."
    ::= { bsnObjects 5 }

bsnActualStackSize OBJECT-TYPE
    SYNTAX      Integer32 (1..8)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The actual stack size when a bsnStackConfigurationError
         notification is generated."
    ::= { bsnObjects 6 }

bsnEapUbpFailureIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The ifIndex of the port for which UBP policies could
         not be installed."
    ::= { bsnObjects 7 }

bsnEapUbpFailureMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The MAC address for which UBP policies could not be
         installed."
    ::= { bsnObjects 8 }

bsnEapUbpFailureRoleString OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..64))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The role string of the UBP policies which could not
         be installed."
    ::= { bsnObjects 9 }

bsnTrialLicenseExpirationTime OBJECT-TYPE
    SYNTAX      Integer32 (0..30)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The number of days until a feature trial license will expire.
         A value of 0 means the license has expired."
    ::= { bsnObjects 10 }

bsnTrialLicenseExpirationNumber OBJECT-TYPE
    SYNTAX      Integer32 (1..10)
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The number of the license that will expire or that has expired."
    ::= { bsnObjects 11 }

bsnEnteredForcedStackModeMAC OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The MAC address of a switch which has entered forced stack mode."
    ::= { bsnObjects 12 }

bsnEapRAVErrorMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The MAC address that was authorized on a port which could not be
         moved to the Radius-Assigned VLAN."
    ::= { bsnObjects 13 }

bsnEapRAVErrorPort OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The ifIndex of the port that could not be moved to the Radius-Assigned
         VLAN."
    ::= { bsnObjects 14 }
    
bsnEnteredForcedStackModeAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The address type contained in the associated value of
         bsnEnteredForcedStackModeAddress."
    ::= { bsnObjects 15 } 
    
bsnEnteredForcedStackModeAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The IP address in use on the switch that entered forced stack mode."
    ::= { bsnObjects 16 }

bsnStackProtectionEvent OBJECT-TYPE
    SYNTAX      INTEGER {
                  cannotJoinStack(1),
                  unitIgnored(2)
                }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object specifies the Stack Protection events which may occur.
         cannotJoinStack(1) occurs on a BU (base unit) enabled switch
         which tries to join an existing operational stack.
         unitIgnored(2) occurs on an operational stack, when a BU enabled switch
         tries to join the stack."
    ::= { bsnObjects 17 }

bsnUSBInfo OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The USB module information."
    ::= { bsnObjects 18 }

bsnSFPInfo OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The SFP module information."
    ::= { bsnObjects 19 }

bsnAaaUserName OBJECT-TYPE
    SYNTAX      SnmpAdminString(SIZE (10..16))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The user name of an AAA user account."
    ::= { bsnObjects 20 }

--
-- Notification types
--

bsnConfigurationSavedToNvram NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION
        "This notification is generated whenever the device saves
         its configuration to non-volatile storage.  The system should
         limit the frequency with which this notification is generated,
         as frequent configuration changes could potentially generate
         too many of these notifications.  How the frequency is limitted
         is an implementation details, but it is suggested that no more
         than one notification be generated per minute."
    ::= { bsnNotifications0 1 }

bsnEapAccessViolation NOTIFICATION-TYPE
    OBJECTS {
        dot1xAuthPaeState,
        dot1xAuthBackendAuthState,
        bsnEapAccessViolationMacAddress
    }
    STATUS current
    DESCRIPTION
        "This notification is generated whenever an EAP access violation
         occurs."
    ::= { bsnNotifications0 2 }

bsnPortSpeedDuplexMismatch NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when a speed or duplex mismatch
         is detected. Once notification has been sent, further notifications
         may be sent, but it is suggested these be at least 5 minutes apart."
    ::= { bsnNotifications0 3 }

bsnStackManagerReconfiguration NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION
        "This notification is generated by a stackable system when the stack
         manager detects a problem with a link between stack members."
    ::= { bsnNotifications0 4 }

bsnLacTrunkUnavailable NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION
        "This notification is generated when the last trunk is occupied out 
         of a limited number of trunks that can be created. The condition usually 
         occurs because a system has some hardware or software limit on the number 
         of trunks that can be created."
    ::= { bsnNotifications0 5 }

bsnLoginFailure NOTIFICATION-TYPE
    OBJECTS {
        bsnLoginFailureType,
        bsnLoginFailureAddressType,
        bsnLoginFailureAddress,
        bsnLoginFailureUsername
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when an attempt to login to the
         system fails as a result of an incorrect password."
    ::= { bsnNotifications0 6 }

bsnMLTHealthFailure NOTIFICATION-TYPE
    OBJECTS {
        ifAdminStatus
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when a receiving switch does not
         receive an expected number of autotopology frames on an MLT in a
         given time interval from the sending switch(es) on the other end
         of the MLT. Once notification has been sent, further notifications
         may be sent, but it is suggested these be at least 5 minutes apart.
         The ifAdminStatus object reflects the state of the port. The port
         may be partitioned by the switch or still be active depending on
         the detection algorithm's control parameters."
    ::= { bsnNotifications0 7 }

bsnTrunkPortDisabledToPreventBroadcastStorm NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when an MLT port is disabled as
         a result of an MLT trunk being disabled."
    ::= { bsnNotifications0 8 }

bsnLacPortDisabledToPreventBroadcastStorm NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when a LAG port that was port of
         a trunk is disabled as a result of the LAC setting on the port
         being turned off."
    ::= { bsnNotifications0 9 }

bsnTrunkPortEnabledToPreventBroadcastStorm NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when an MLT port is enabled as
         a result of an MLT trunk being disabled."
    ::= { bsnNotifications0 10 }

bsnLacPortDisabledDueToLossOfVLACPDU NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "Generated when a port is disabled due to the loss of a VLACP PDU."
    ::= { bsnNotifications0 11 }

bsnLacPortEnabledDueToReceiptOfVLACPDU NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "Generated when a port is enabled due to receipt of a VLACP PDU."
    ::= { bsnNotifications0 12 }

bsnStackConfigurationError NOTIFICATION-TYPE
    OBJECTS {
        bayStackConfigExpectedStackSize,
        bsnActualStackSize
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when the expected size of
         a stack is not equal to the actual size of the stack."
    ::= { bsnNotifications0 13 }

bsnEapUbpFailure NOTIFICATION-TYPE
    OBJECTS {
        bsnEapUbpFailureIfIndex,
        bsnEapUbpFailureMacAddress,
        bsnEapUbpFailureRoleString
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when installation of a UBP
         policy fails following EAP authentication."
    ::= { bsnNotifications0 14 }

bsnTrialLicenseExpiration NOTIFICATION-TYPE
    OBJECTS {
        bsnTrialLicenseExpirationTime,
        bsnTrialLicenseExpirationNumber
    }
    STATUS current
    DESCRIPTION
        "This notification is generated to indicate that a trial license is
         going to expire soon, or has already expired."
    ::= { bsnNotifications0 15 }

bsnEnteredForcedStackMode NOTIFICATION-TYPE
    OBJECTS {
        bsnEnteredForcedStackModeMAC,
        bsnEnteredForcedStackModeAddressType,
        bsnEnteredForcedStackModeAddress                
    }
    STATUS current
    DESCRIPTION
        "This notification is generated to indicate that a switch has
         entered forced stack mode."
    ::= { bsnNotifications0 16 }

bsnTemperatureExceeded NOTIFICATION-TYPE
    OBJECTS {
        s5ChasComType
    }
    STATUS current
    DESCRIPTION
        "This notification is generated when the temperature of a chassis
         component has exceeded some threshold.  The instance of s5ChasComType
         included in the notification identifies the component."
    ::= { bsnNotifications0 17 }

bsnEapRAVError NOTIFICATION-TYPE
    OBJECTS {
        dot1xAuthPaeState,
        dot1xAuthBackendAuthState,
        bsnEapRAVErrorMacAddress,
        bsnEapRAVErrorPort
    }
    STATUS current
    DESCRIPTION
        "This notification indicates that an Eap client MAC address was
         authorized on a port, but the port could not be moved to the
         Radius-Assigned VLAN."
    ::= { bsnNotifications0 18 }

bsnEapRateLimitExceeded NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification indicates that incoming traffic on a port
         exceeded the rate limit settings on that port."
    ::= { bsnNotifications0 19 }

bsnSystemUp365Days NOTIFICATION-TYPE
    OBJECTS {
        bayStackUnitConfigIndex
    }
    STATUS current
    DESCRIPTION
        "This notification indicates that the system has been up for 365 days.
         In stack configuration, bayStackUnitConfigIndex specifies the unit number. 
         For a standalone unit bayStackUnitConfigIndex is always 1."
    ::= { bsnNotifications0 20 }

bsnUSBInsertion NOTIFICATION-TYPE
    OBJECTS {
        s5AgSysUsbTargetUnit,
        bsnUSBInfo
    }
    STATUS current
    DESCRIPTION
        "This notification is triggered when an USB device is inserted.
         In stack configuration, s5AgSysUsbTargetUnit specifies the unit number.
         For standalone, s5AgSysUsbTargetUnit is always 0."
    ::= { bsnNotifications0 21 }

bsnUSBRemoval NOTIFICATION-TYPE
    OBJECTS {
        s5AgSysUsbTargetUnit
    }
    STATUS current
    DESCRIPTION
        "This notification is triggered when an USB device is removed.
         In stack configuration, s5AgSysUsbTargetUnit specifies the unit number.
         For standalone, s5AgSysUsbTargetUnit is always 0."
    ::= { bsnNotifications0 22 }

bsnSFPInsertion NOTIFICATION-TYPE
    OBJECTS {
        ifIndex,
        bsnSFPInfo
    }
    STATUS current
    DESCRIPTION
        "This notification is triggered when an SFP module is inserted."
    ::= { bsnNotifications0 23 }

bsnSFPRemoval NOTIFICATION-TYPE
    OBJECTS {
        ifIndex
    }
    STATUS current
    DESCRIPTION
        "This notification is triggered when an SFP module is removed."
    ::= { bsnNotifications0 24 } 

bsnROPasswordExpired NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION
        "This notification is sent when RO password expired."
    ::= { bsnNotifications0 25 } 

bsnRWPasswordExpired NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION
        "This notification is sent when RW password expired."
    ::= { bsnNotifications0 26 }

bsnStackProtection NOTIFICATION-TYPE
    OBJECTS {
       bsnStackProtectionEvent
    }
    STATUS current
    DESCRIPTION
        "This notification is sent when a stack protection event occurs.
         The event type is specified by the bsnStackProtectionEvent object."
    ::= { bsnNotifications0 27 }

bsnRunScripts NOTIFICATION-TYPE
    OBJECTS {
       s5AgentScriptStatus
    }
    STATUS current
    DESCRIPTION
        "This notification is sent when a script has been run.
         It indicates whether the execution was successful or not."
    ::= { bsnNotifications0 28 }

bsnAaaUserAccountNotUsed NOTIFICATION-TYPE
    OBJECTS      { bsnAaaUserName }
    STATUS current
    DESCRIPTION 
        "A bsnAaaUserAccountNotUsed trap signifies that
         a user account has never been used during a time interval."
    ::= { bsnNotifications0 29 }

bsnAaaAlreadyConnected NOTIFICATION-TYPE
    OBJECTS      { bsnAaaUserName }
    STATUS current
    DESCRIPTION 
        "A bsnAaaAlreadyConnected trap signifies that
         a user is already connected while he attempts to connect again."
    ::= { bsnNotifications0 30 }

bsnAaaIncorrectLogOnThresholdExceeded NOTIFICATION-TYPE
    OBJECTS      { bsnAaaUserName }
    STATUS current
    DESCRIPTION 
        "A bsnAaaIncorrectLogOnThresholdExceeded trap signifies that
         the threshold for incorrect user-entered information is exceeded."
    ::= { bsnNotifications0 31 }

bsnAaaMaxNoOfSessionsExceeded NOTIFICATION-TYPE
    OBJECTS      { bsnAaaUserName }
    STATUS current
    DESCRIPTION 
        "A bsnAaaMaxNoOfSessionsExceeded trap signifies that the maxim
         number of current sessions for an AAA user account is exceeded."
    ::= { bsnNotifications0 32 }

bsnAuditUnsentMessages NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION 
        "A bsnAuditUnsentMessages trap signifies that the number 
         of audit unsent messages has reached 50% from the total capacity."
    ::= { bsnNotifications0 33 }

bsnAuditRecordEventsFailure NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION 
        "A bsnAuditRecordEventsFailure trap signifies that security log fails 
         to record the events that are required to be recorded."
    ::= { bsnNotifications0 34 }

bsnAuditStartUpTrap NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION 
        "A bsnAuditStartUpTrap trap signifies that the audit function starts up."
    ::= { bsnNotifications0 35 }

bsnAuditShutDownTrap NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION 
        "A bsnAuditStartUpTrap trap signifies that the audit function shuts down."
    ::= { bsnNotifications0 36 }

bsnAaaUserPasswordExpired NOTIFICATION-TYPE
    OBJECTS      { bsnAaaUserName }
    STATUS current
    DESCRIPTION 
        "A bsnAaaUserPasswordExpired trap signifies that the password stored
         for an AAA user account has expired."
    ::= { bsnNotifications0 37 }

bsnEapAccessViolationExt NOTIFICATION-TYPE
    OBJECTS {
        bseeMultiHostStatusPacpState,
        bsnEapAccessViolationMacAddress
    }
    STATUS current
    DESCRIPTION
        "This notification is generated whenever an EAP access violation
         occurs. Will replace bsnEapAccessViolation for 802.1X/2010."
    ::= { bsnNotifications0 38 }

bsnEapRAVErrorExt NOTIFICATION-TYPE
    OBJECTS {
        bseeMultiHostStatusPacpState,
        bsnEapRAVErrorMacAddress,
        bsnEapRAVErrorPort
    }
    STATUS current
    DESCRIPTION
        "This notification indicates that an Eap client MAC address was
         authorized on a port, but the port could not be moved to the
         Radius-Assigned VLAN. Will replace bsnEapRAVError for 802.1X/2010."
    ::= { bsnNotifications0 39 }

bsnAuditStorageAlarm NOTIFICATION-TYPE
    STATUS current
    DESCRIPTION 
        "A bsnAuditStorageAlarm trap signifies that the audit storage has
        reached 75% of its capacity."
    ::= { bsnNotifications0 40 }

bsnSnmpMaxPktSizeChanged NOTIFICATION-TYPE
    OBJECTS      { s5AgSnmpMaxPktSize }
    STATUS current
    DESCRIPTION 
        "This notification is sent when the value of s5AgSnmpMaxPktSize has changed."
    ::= { bsnNotifications0 41 }

END


