TN-SDP-MIB DEFINITIONS ::= BEGIN

-- (c) Copyright 2019 Nokia Networks.  All rights reserved.
-- This software is the confidential and proprietary property of
-- Nokia and may only be used in accordance with the terms of the
-- license agreement provided with this software.

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Integer32, Unsigned32, IpAddress,
    Counter64                                   FROM SNMPv2-SMI

    RowStatus, TimeStamp,
    TruthValue FROM SNMPv2-TC

    InterfaceIndexOrZero                        FROM IF-MIB

    InetAddressType, InetAddress                FROM INET-ADDRESS-MIB

    ServiceAdminStatus,
--  TmnxActionType, TmnxAdminState,
    TmnxServId, TmnxCustId, TNamedItem, SdpBindId, TNamedItemOrEmpty,
    TmnxVRtrMplsLspID, TmnxOperState, TmnxIgmpVersion,
    TmnxEnabledDisabled, TItemDescription,
--  TPolicyStatementNameOrEmpty,
    TCpmProtPolicyID, TmnxVPNRouteDistinguisher,
--  TmnxPwGlobalId, TmnxSpokeSdpId, TmnxPwGlobalIdOrZero,
    TmnxBsxTransitIpPolicyIdOrZero, TmnxBsxTransPrefPolicyIdOrZero,
    TmnxBsxAarpIdOrZero, TmnxBsxAarpServiceRefType, TmnxPortID, TmnxVcId,
    TSdpIngressPolicyID, TSdpEgressPolicyID, TQosQGrpInstanceIDorZero,
    TmnxMplsTpGlobalID, TmnxMplsTpNodeID, ServObjDesc, TFilterID
                                                FROM TN-TC-MIB

--    tmnxServObjs, tmnxServConformance, tmnxServNotifications, tmnxSvcObjs,
--    custId, svcId, svcVpnId, tstpTraps,
--    tmnxOtherBridgeId, tmnxCustomerBridgeId, tmnxCustomerRootBridgeId,
--    tmnxOldSdpBindTlsStpPortState, svcTlsStpDesignatedRoot,
--    tlsDhcpPacketProblem, svcDhcpLseStateNewCiAddr,
--    svcDhcpLseStateNewChAddr, svcDhcpLseStateOldCiAddr,
--    svcDhcpLseStateOldChAddr, svcDhcpClientLease, svcDhcpLseStatePopulateError,
--    svcTlsMacMoveMaxRate, svcDhcpProxyError, svcDhcpCoAError,
--    svcDhcpPacketProblem, svcDhcpSubAuthError,
--    ServObjName, ServObjDesc,
--    VpnId, SdpId, PWTemplateId, TlsBpduTranslation,
--    TlsLimitMacMoveLevel, TlsLimitMacMove, SdpBindVcType,
--    StpExceptionCondition, LspIdList, BridgeId, TStpPortState,
--    StpPortRole, StpProtocol, MvplsPruneState, TdmOptionsSigPkts,
--    TdmOptionsCasTrunkFraming, SdpBFHundredthsOfPercent, SdpBindBandwidth,
--    L2ptProtocols, L2RouteOrigin, ConfigStatus,
--    TmnxSiteId, protectedMacForNotify
--                                              FROM TN-SERV-MIB

    tnServObjs, tnSvcId, ServObjName,
    VpnId, SdpId, SdpBindVcType, LspIdList, TlsLimitMacMove, SdpBindBandwidth,
    L2RouteOrigin, PWTemplateId
                                                FROM TN-SERV-MIB

    tnSRMIBModules                              FROM TROPIC-GLOBAL-REG

    tnSysSwitchId                               FROM TROPIC-SYSTEM-MIB

--  tmnxChassisIndex, tmnxCardSlotNum,
--  tmnxMDASlotNum                              FROM TIMETRA-CHASSIS-MIB;
;

tnServicesSdpMIBModule   MODULE-IDENTITY
        LAST-UPDATED "201812210000Z"
        ORGANIZATION "Nokia"
        CONTACT-INFO
            "Nokia SROS Support
             Web: http://support.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision
        the various services of the Nokia SROS system.

        Copyright 2003-2013 Nokia. All rights reserved.
        Reproduction of this document is authorized on the condition that
        the foregoing copyright notice is included.

        This SNMP MIB module (Specification) embodies Nokia's
        proprietary intellectual property.  Nokia retains
        all title and ownership in the Specification, including any
        revisions.

        Nokia grants all interested parties a non-exclusive
        license to use and distribute an unmodified copy of this
        Specification in connection with management of Nokia
        products, and without fee, provided this copyright notice and
        license appear on all copies.

        This Specification is supplied 'as is', and Nokia
        makes no warranty, either express or implied, as to the use,
        operation, condition, or performance of the Specification."

--
--  Revision History
--

    REVISION        "201812210000Z"
    DESCRIPTION     "Added the following to sdpBindTlsTable:
                     sdpBindTlsMacAddressLimit."

    REVISION        "201808310000Z"
    DESCRIPTION     "1) Added tnSysSwitchId as table index for the following:
                        sdpBindTlsTable
                        pwTemplateTable
                        pwTemplateIgmpSnpgGrpSrcTable.
                     2) Added the following to sdpBindTlsTable:
                        sdpBindTlsL2ptTermination."

    REVISION        "201807200000Z"
    DESCRIPTION     "Added the following tables:
                     sdpBindTlsTable
                     pwTemplateTable
                     pwTemplateIgmpSnpgGrpSrcTable."

    REVISION        "201508130000Z"
    DESCRIPTION     "Range of sdpAdminPathMtu is modified
                     from (576..9194) to (1518..9586)"

    REVISION        "201506160000Z"
    DESCRIPTION     "Added the support for TN-SDP-MIB"

    REVISION        "201102010000Z"
    DESCRIPTION     "Rev 9.0                1 Feb 2011 00:00
                     9.0 release of the TIMETRA-SDP-MIB."

    REVISION        "200902280000Z"
    DESCRIPTION     "Rev 7.0                28 Feb 2009 00:00
                     7.0 release of the TIMETRA-SDP-MIB."

    REVISION        "200807010000Z"
    DESCRIPTION     "Rev 6.1                01 Jul 2008 00:00
                     6.1 release of the TIMETRA-SDP-MIB."

    REVISION        "200710010000Z"
    DESCRIPTION     "Rev 1.0                01 Oct 2007 00:00
                     1.0 release of the TIMETRA-SDP-MIB from TIMETRA-SERV-MIB."

    ::= { tnSRMIBModules 56 }

-- --------------------------------------------------------------------
--      TN-SERV-MIB organisation
-- --------------------------------------------------------------------
tnSdpObjs             OBJECT IDENTIFIER ::= { tnServObjs 4 }
--    tmnxSdpNotifyObjs       OBJECT IDENTIFIER ::= { tnSdpObjs 100 }

-- tmnxSdpConformance      OBJECT IDENTIFIER ::= { tmnxServConformance 4 }

-- sdpTrapsPrefix          OBJECT IDENTIFIER ::= { tmnxServNotifications 4 }
--    sdpTraps                OBJECT IDENTIFIER ::= { sdpTrapsPrefix 0 }

-- --------------------------------------------------------------------
-- tnSdpObjs group
-- --------------------------------------------------------------------
sdpNumEntries OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The current number of SDPs configured in this
                     device."
    ::= { tnSdpObjs 1 }

sdpNextFreeId OBJECT-TYPE
    SYNTAX          SdpId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The next available value for sdpId."
    ::= { tnSdpObjs 2 }

-- ----------------------------
-- SDP Table
-- ----------------------------
sdpInfoTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpInfoEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "A table that contains SDP information."
    ::= { tnSdpObjs 3 }

sdpInfoEntry OBJECT-TYPE
    SYNTAX          SdpInfoEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Information about a specific SDP."
    INDEX           { tnSysSwitchId, sdpId }
    ::= { sdpInfoTable 1 }

SdpInfoEntry ::=
    SEQUENCE {
        sdpId                                    SdpId,
        sdpRowStatus                             RowStatus,
        sdpDelivery                              INTEGER,
        sdpFarEndIpAddress                       IpAddress,
        sdpLspList                               LspIdList,
        sdpDescription                           ServObjDesc,
        sdpLabelSignaling                        INTEGER,
        sdpAdminStatus                           ServiceAdminStatus,
        sdpOperStatus                            INTEGER,
        sdpAdminPathMtu                          INTEGER,
        sdpOperPathMtu                           Integer32,
        sdpKeepAliveAdminStatus                  INTEGER,
        sdpKeepAliveOperStatus                   INTEGER,
        sdpKeepAliveHelloTime                    INTEGER,
        sdpKeepAliveMaxDropCount                 INTEGER,
        sdpKeepAliveHoldDownTime                 INTEGER,
        sdpLastMgmtChange                        TimeStamp,
        sdpKeepAliveHelloMessageLength           INTEGER,
        sdpKeepAliveNumHelloRequestMessages      Unsigned32,
        sdpKeepAliveNumHelloResponseMessages     Unsigned32,
        sdpKeepAliveNumLateHelloResponseMessages Unsigned32,
        sdpKeepAliveHelloRequestTimeout          INTEGER,
        sdpLdpEnabled                            TruthValue,
        sdpVlanVcEtype                           Unsigned32,
        sdpAdvertisedVllMtuOverride              TruthValue,
        sdpOperFlags                             BITS,
        sdpLastStatusChange                      TimeStamp,
        sdpMvplsMgmtService                      TmnxServId,
        sdpMvplsMgmtSdpBndId                     SdpBindId,
        sdpCollectAcctStats                      TruthValue,
        sdpAccountingPolicyId                    Unsigned32,
        sdpClassFwdingEnabled                    TruthValue,
        sdpClassFwdingDefaultLsp                 TmnxVRtrMplsLspID,
        sdpClassFwdingMcLsp                      TmnxVRtrMplsLspID,
        sdpMetric                                Unsigned32,
        sdpAutoSdp                               TruthValue,
        sdpSnmpAllowed                           TruthValue,
        sdpPBBEtype                              Unsigned32,
        sdpBandwidthBookingFactor                Unsigned32,
        sdpOperBandwidth                         Unsigned32,
        sdpAvailableBandwidth                    Unsigned32,
        sdpMaxBookableBandwidth                  Unsigned32,
        sdpBookedBandwidth                       Unsigned32,
        sdpCreationOrigin                        L2RouteOrigin,
        sdpEnforceDiffServLspFc                  TruthValue,
        sdpMixedLspModeEnabled                   TruthValue,
        sdpLspRevertTime                         Integer32,
        sdpLspRevertTimeCountDown                Integer32,
        sdpLdpLspId                              Unsigned32,
        sdpLdpActive                             TruthValue,
        sdpNetDomainName                         TNamedItemOrEmpty,
        sdpEgressIfsNetDomainConsistent          INTEGER,
        sdpBgpTunnelEnabled                      TruthValue,
        sdpBgpTunnelLspId                        Unsigned32,
        sdpTunnelFarEndIpAddress                 IpAddress,
        sdpActiveLspType                         INTEGER,
        sdpBindingPort                           TmnxPortID,
        sdpFarEndNodeId                          TmnxMplsTpNodeID,
        sdpFarEndGlobalId                        TmnxMplsTpGlobalID
    }

sdpId OBJECT-TYPE
    SYNTAX          SdpId
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "SDP identifier."
    ::= { sdpInfoEntry 1 }

sdpRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object indicates the status of this row. The
                     only values supported during a set operation are
                     'createAndGo' and 'destroy'. To delete an entry
                     from this table, the corresponding SDP must be
                     administratively down, not bound to any service,
                     and not in use as a mirror destination."
    ::= { sdpInfoEntry 2 }

sdpDelivery OBJECT-TYPE
    SYNTAX          INTEGER {
                        gre  (1),
                        mpls   (2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the type of delivery used
                     by this SDP. The value of this
                     object must be specified when the row is created
                     and cannot be changed while the row status is
                     'active'."
    ::= { sdpInfoEntry 3 }

sdpFarEndIpAddress OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the IP address of the remote
                     end of the GRE or MPLS tunnel defined by this SDP.
                     If sdpTunnelFarEndIpAddress is not set, then
                     sdpFarEndIpAddress also specifies the remote end of
                     the TLDP session.

                     The value of this object must be set to a non-default value
                     when the sdpDelivery is set to 'gre' or 'mpls' for the
                     row to become 'active', and can only be changed while the
                     admin status of the SDP is 'down'."
    DEFVAL { 0 }
    ::= { sdpInfoEntry 4 }

sdpLspList OBJECT-TYPE
    SYNTAX          LspIdList
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "When the SDP delivery specified by sdpDelivery
                     is 'mpls', this object specifies the list of
                     LSPs used to reach the far-end ESR device.
                     All the LSPs in this list must terminate at the
                     IP address specified by sdpFarEndIpAddress
                     or sdpFarEndNodeId (for sdpDelivery of 'mpls').
                     This object is otherwise insignificant and should
                     contain a value of 0.

                     When this list has more than one element, the
                     Nokia SROS router will use all of the LSPs for
                     load balancing purposes. Each LSP ID in the list
                     corresponds to the vRtrMplsLspIndex of the given
                     MPLS LSP."
    ::= { sdpInfoEntry 5 }

sdpDescription OBJECT-TYPE
    SYNTAX          ServObjDesc
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "Generic information about this SDP."
    DEFVAL          { "" }
    ::= { sdpInfoEntry 6 }

sdpLabelSignaling OBJECT-TYPE
    SYNTAX          INTEGER {
                        none (1),
                        tldp (2),
                        bgp  (3)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the signaling protocol
                     used to obtain the ingress and egress labels
                     used in frames transmitted and received on
                     this SDP. When the value of this object is
                     'none' then the labels are manually assigned
                     at the time the SDP is bound to a service. The
                     value of this object can only be changed while
                     the admin status of the SDP is 'down'.

                     An 'inconsistentValue' error is returned if this object
                     is not set to 'none' when sdpDelivery is set to 'mpls'.

                     Default value of this object is set to 'none' when
                     sdpDelivery is set to 'mpls' otherwise default value
                     for this object is set to 'tldp'."
    ::= { sdpInfoEntry 7 }

sdpAdminStatus OBJECT-TYPE
    SYNTAX          ServiceAdminStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The desired state of this SDP."
    DEFVAL          { down }
    ::= { sdpInfoEntry 8 }

sdpOperStatus OBJECT-TYPE
    SYNTAX          INTEGER {
                        up                     (1),
                        notAlive               (2),
                        notReady               (3),
                        invalidEgressInterface (4),
                        transportTunnelDown    (5),
                        down                   (6)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The operating state of this SDP. The value
                     'notAlive' is valid only when keep-alive is
                     enabled, and it means that the keep-alive
                     operating status is not alive. The value
                     'notReady' is valid only when this SDP uses a
                     label signaling protocol (e.g. TLDP) and it means
                     that the signaling session with the far-end peer
                     has not been established. The value
                     'invalidEgressInterface' indicates that the
                     IOM's have detected that the egress interface
                     towards the far-end device is not a network
                     port."
    ::= { sdpInfoEntry 9 }

sdpAdminPathMtu OBJECT-TYPE
    SYNTAX          Integer32 (0|1518..9586)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the desired largest service
                     frame size (in octets) that can be transmitted
                     through this SDP to the far-end ESR, without
                     requiring the packet to be fragmented. The default
                     value of zero indicates that the path MTU should
                     be computed dynamically from the corresponding
                     MTU of the tunnel."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 10 }

sdpOperPathMtu OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "This object specifies the actual largest service
                     frame size (in octets) that can be transmitted
                     through this SDP to the far-end ESR, without
                     requiring the packet to be fragmented. In order
                     to be able to bind this SDP to a given service,
                     the value of this object minus the control word
                     size (if applicable) must be equal to or
                     larger than the MTU of the service, as defined
                     by its svcMtu."
    ::= { sdpInfoEntry 11 }

sdpKeepAliveAdminStatus OBJECT-TYPE
    SYNTAX          INTEGER {
                        enabled  (1),
                        disabled (2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object is used to enable or disable the
                     keep-alive protocol used to determine the
                     operating status of this SDP."
    DEFVAL          { disabled }
    ::= { sdpInfoEntry 12 }

sdpKeepAliveOperStatus OBJECT-TYPE
    SYNTAX          INTEGER {
                        alive            (1),
                        noResponse       (2),
                        senderIdInvalid  (3),
                        responderIdError (4),
                        disabled         (5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The current status of the keep-alive protocol.
                     The value 'alive' indicates that the far-end
                     ESR is replying the SDP Echo Requests messages
                     sent by this device indicating no error condition.
                     The value 'noResponse' indicates that the number
                     of consecutive SDP Echo Request messages unack-
                     nowledged by the far-end ESR exceeded the limit
                     defined by sdpKeepAliveMaxDropCount. The values
                     'senderIdInvalid' and 'responderIdError' are
                     two error conditions detected by the far-end ESR.
                     The value 'disabled' indicates that the keep-alive
                     protocol is not enabled."
    ::= { sdpInfoEntry 13 }

sdpKeepAliveHelloTime OBJECT-TYPE
    SYNTAX          Integer32 (1..3600)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies how often the SDP Echo
                     Request messages are transmitted on this SDP."
    DEFVAL          { 10 }
    ::= { sdpInfoEntry 14 }

sdpKeepAliveMaxDropCount OBJECT-TYPE
    SYNTAX          Integer32 (1..5)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the maximum number of
                     consecutive SDP Echo Request messages that can
                     be unacknowledged before the keep-alive
                     protocol reports a fault."
    DEFVAL          { 3 }
    ::= { sdpInfoEntry 15 }

sdpKeepAliveHoldDownTime OBJECT-TYPE
    SYNTAX          Integer32 (0..3600)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the amount of time to
                     wait before the keep-alive operating status
                     is eligible to enter the 'alive' state."
    DEFVAL          { 10 }
    ::= { sdpInfoEntry 16 }

sdpLastMgmtChange OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sysUpTime at the time of the
                     most recent management-initiated change to
                     this SDP."
    ::= { sdpInfoEntry 17 }

sdpKeepAliveHelloMessageLength OBJECT-TYPE
    SYNTAX          Integer32 (0 | 40..9198)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the length of the
                     SDP Echo Request messages transmitted on
                     this SDP. The default value of zero
                     indicates that the message length should
                     be equal to the SDP's operating path MTU,
                     as specified by sdpOperPathMtu. When the
                     default value is overridden, the message
                     length is sdpKeepAliveHelloMessageLength."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 18 }

sdpKeepAliveNumHelloRequestMessages OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The number of SDP Echo Request messages
                     transmitted since the keep-alive was
                     administratively enabled or the counter
                     was cleared."
    ::= { sdpInfoEntry 19 }

sdpKeepAliveNumHelloResponseMessages OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The number of SDP Echo Response messages
                     received since the keep-alive was
                     administratively enabled or the counter
                     was cleared."
    ::= { sdpInfoEntry 20 }

sdpKeepAliveNumLateHelloResponseMessages OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The number of SDP Echo Response messages
                     received after the corresponding Request
                     timeout timer expired."
    ::= { sdpInfoEntry 21 }

sdpKeepAliveHelloRequestTimeout OBJECT-TYPE
    SYNTAX          Integer32 (1..10)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The number of seconds to wait for an SDP
                     Echo Response message before declaring
                     a timeout."
    DEFVAL { 5 }
    ::= { sdpInfoEntry 22 }

sdpLdpEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "When the value of this object is 'true'
                     the transport LSP's are signalled by LDP,
                     as opposed to being provisioned static or
                     RSVP-signalled LSP's. This object applies
                     only to MPLS SDP's."
    DEFVAL { false }
    ::= { sdpInfoEntry 23 }

sdpVlanVcEtype OBJECT-TYPE
    SYNTAX          Unsigned32 ('600'H..'ffff'H)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the Ethertype used in
                     frames sent out this SDP, when the VC type
                     is vlan."
    DEFVAL          { '8100'H }
    ::= { sdpInfoEntry 24 }

sdpAdvertisedVllMtuOverride OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "When the value of this object is 'true'
                     the advertised MTU of a VLL spoke SDP bind
                     includes the 14-byte L2 header, so that it is
                     backward compatible with pre-2.0 software."
    DEFVAL { false }
    ::= { sdpInfoEntry 25 }

sdpOperFlags OBJECT-TYPE
    SYNTAX          BITS {
                        sdpAdminDown            (0),
                        signalingSessionDown    (1),
                        transportTunnelDown     (2),
                        keepaliveFailure        (3),
                        invalidEgressInterface  (4),
                        noSystemIpAddress       (5),
                        transportTunnelUnstable (6),
                        notOnBindingPort        (7)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "This object specifies all the conditions that
                     affect the operating status of this SDP."
    ::= { sdpInfoEntry 26 }

sdpLastStatusChange OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sysUpTime at the time of the
                     most recent operating status change to this
                     SDP."
    ::= { sdpInfoEntry 27 }

sdpMvplsMgmtService OBJECT-TYPE
    SYNTAX          TmnxServId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpMvplsMgmtService indicates
                     the service Id of the service where the STP instance
                     is running that is managing this SDP. This object is
                     only valid if sdpMvplsMgmtService is different from
                     0."
    ::= { sdpInfoEntry 28 }

sdpMvplsMgmtSdpBndId OBJECT-TYPE
    SYNTAX          SdpBindId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpMvplsMgmtSdpBndId indicates
                     which SDP bind in the mVPLS instance specified in
                     sdpMvplsMgmtService is controlling this SDP. This
                     object is only valid if sdpMvplsMgmtService is
                     different from 0."
    ::= { sdpInfoEntry 29 }

sdpCollectAcctStats OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the object sdpCollectAcctStats specifies
                     whether the agent collects accounting statistics for this
                     SDP. When the value is 'true' the agent
                     collects accounting statistics on this SDP."
    DEFVAL          { false }
    ::= { sdpInfoEntry 30 }

sdpAccountingPolicyId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpAccountingPolicyId specifies the
                     policy to use to collect accounting statistics on
                     this SDP. The value zero indicates that the
                     agent should use the default accounting policy,
                     if one exists."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 31 }

sdpClassFwdingEnabled OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpClassFwdingEnabled specifies the
                     admin state of class-based forwarding on this SDP. When
                     the value is 'true', class-based forwarding is enabled."
    DEFVAL          { false }
    ::= { sdpInfoEntry 32 }

sdpClassFwdingDefaultLsp OBJECT-TYPE
    SYNTAX          TmnxVRtrMplsLspID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpClassFwdingDefaultLsp specifies the
                     LSP ID that is used as a default when class-based
                     forwarding is enabled on this SDP. This object
                     must be set when enabling class-based forwarding."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 33 }

sdpClassFwdingMcLsp OBJECT-TYPE
    SYNTAX          TmnxVRtrMplsLspID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpClassFwdingMcLsp specifies the LSP ID that
                     all multicast traffic will be forwarded on when class-based
                     forwarding is enabled on this SDP. When this object has its
                     default value, multicast traffic will be forwarded
                     on an LSP according to its forwarding class mapping."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 34 }

sdpMetric       OBJECT-TYPE
    SYNTAX          Unsigned32 (0..65535)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpMetric specifies the metric to be used
                     within the Tunnel Table Manager for decision making
                     purposes. When multiple SDPs going to the same destination
                     exist, this value is used as a tie-breaker by Tunnel Table
                     Manager users like MP-BGP to select route with lower
                     value."
    DEFVAL          { 0 }
    ::= { sdpInfoEntry 35 }

sdpAutoSdp      OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpAutoSdp indicates whether this is an
                     Auto generated SDP from RADIUS discovery or BGP
                     auto-discovery."
    ::= { sdpInfoEntry 36 }

sdpSnmpAllowed OBJECT-TYPE
    SYNTAX           TruthValue
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION      "The value of sdpSnmpAllowed indicates if SNMP sets
                      are allowed on this SDP."
    ::= { sdpInfoEntry 37 }

sdpPBBEtype OBJECT-TYPE
    SYNTAX          Unsigned32 ('600'H..'ffff'H)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object specifies the Ethertype used in frames sent
                     out on this SDP when sdpBindVcType is 'vlan' for
                     Provider Backbone Bridging frames."
    DEFVAL          { '88E7'H }
    ::= { sdpInfoEntry 38 }

sdpBandwidthBookingFactor OBJECT-TYPE
    SYNTAX           Unsigned32 (0..1000)
    MAX-ACCESS       read-create
    STATUS           current
    DESCRIPTION      "sdpBandwidthBookingFactor is used to calculate the max
                     SDP available bandwidth.  The value of
                     sdpBandwidthBookingFactor specifies the percentage of the
                     SDP max available bandwidth for VLL call admission. When
                     the value of sdpBandwidthBookingFactor is set to zero (0),
                     no new VLL spoke-sdp bindings with non-zero bandwidth are
                     permitted with this SDP.  Overbooking, >100% is allowed."
    DEFVAL          { 100 }
    ::= { sdpInfoEntry 39 }

sdpOperBandwidth OBJECT-TYPE
    SYNTAX           Unsigned32
    UNITS            "kilo-bits per second"
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION      "The value of sdpOperBandwidth indicates the operational
                      Bandwidth in kilo-bits per seconds (Kbps) available for
                      this SDP. The value sdpOperBandwidth is determined by the
                      sum of the bandwidth of all the RSVP LSPs used by the
                      SDP."
    ::= { sdpInfoEntry 40 }

sdpAvailableBandwidth OBJECT-TYPE
    SYNTAX           Unsigned32
    UNITS            "kilo-bits per second"
    MAX-ACCESS       read-only
    STATUS           current
    DESCRIPTION      "The value of sdpAvailableBandwidth indicates the Bandwidth
                      that is still free for booking by the SDP bindings on the
                      SDP."
    ::= { sdpInfoEntry 41 }

sdpMaxBookableBandwidth OBJECT-TYPE
    SYNTAX           Unsigned32
    UNITS            "kilo-bits per second"
    MAX-ACCESS       accessible-for-notify
    STATUS           current
    DESCRIPTION      "The value of sdpMaxBookableBandwidth indicates the max
                      Bandwidth that the SDP has for booking by the SDP
                      bindings. The value of sdpMaxBookableBandwidth is
                      calculated as follow:

                      sdpMaxBookableBandwidth = sdpOperBandwidth *
                                                sdpBandwidthBookingFactor
                      "
    ::= { sdpInfoEntry 42 }

sdpBookedBandwidth OBJECT-TYPE
    SYNTAX           Unsigned32
    UNITS            "kilo-bits per second"
    MAX-ACCESS       accessible-for-notify
    STATUS           current
    DESCRIPTION      "The value of sdpBookedBandwidth indicates the
                      SDP Bandwidth that has been booked by the SDP
                      bindings."
    ::= { sdpInfoEntry 43 }

sdpCreationOrigin   OBJECT-TYPE
    SYNTAX          L2RouteOrigin
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpCreationOrigin indicates the protocol or
                     mechanism which created this SDP."
    ::= { sdpInfoEntry 44 }

sdpEnforceDiffServLspFc OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpEnforceDiffServLspFc specifies
                     whether service manager must validate with RSVP the
                     support of the FC by the LSP.

                     By default, the SDP uses the direct configuration
                     without validation with RSVP. "
    DEFVAL           { false}
    ::= { sdpInfoEntry 45 }

sdpMixedLspModeEnabled  OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpMixedLspModeEnabled specifies whether
                     mixed mode LSPs is enabled on this SDP.  Setting the
                     value to 'true' allows LDP to be enabled and LSPs to
                     be configured at the same time on this SDP."
    DEFVAL           { false }
    ::= { sdpInfoEntry 46 }

sdpLspRevertTime  OBJECT-TYPE
    SYNTAX          Integer32 (-1 | 0..600)
    UNITS           "seconds"
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpLspRevertTime specifies the time to wait
                     before reverting back from LDP to the configured LSPs,
                     after having failed over to LDP.

                     When the value is -1, the sdp will never revert back."
    DEFVAL           { 0 }
    ::= { sdpInfoEntry 47 }

sdpLspRevertTimeCountDown OBJECT-TYPE
    SYNTAX          Integer32 (-1 | 0..600)
    UNITS           "seconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpLspRevertTimeCountDown indicated the timer
                     countdown before reverting back from LDP on this SDP.
                     The timer countdown begins after the first configured LSP
                     becomes active.

                     The value of -1 indicates when the revert time countdown
                     is not applicable."
    ::= { sdpInfoEntry 48 }

sdpLdpLspId     OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpLdpLspId indicates the Id for the LDP
                     LSP if sdpLdpEnabled is set to 'true' and there is a
                     valid LDP route to the sdpFarEndIpAddress or
                     sdpFarEndNodeId."
    ::= { sdpInfoEntry 49 }

sdpLdpActive    OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          obsolete
    DESCRIPTION     "The value of sdpLdpActive indicates whether LDP is active
                     for the current SDP."
    ::= { sdpInfoEntry 50 }

sdpNetDomainName     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpNetDomainName specifies the network-domain name
         configured on this SDP. The dafault value of this object is the
         'default' network-domain."
    DEFVAL { "default" }
    ::= { sdpInfoEntry 51 }

sdpEgressIfsNetDomainConsistent     OBJECT-TYPE
    SYNTAX      INTEGER {
                    notApplicable (1),
                    consistent    (2),
                    inconsistent  (3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of sdpEgressIfsNetDomainConsistent indicates whether all
         the egress network interfaces that can carry traffic on this SDP are
         associated with the network-domain configured on this SDP.

         A value of 'notApplicable' indicates that there is no egress
         network interface that can carry traffic on this SDP.

         A value of 'consistent' indicates that the network-domains for all the
         egress network interfaces that can carry traffic on this SDP are
         consistent.

         A value of 'inconsistent' indicates that the network-domain for one or
         more egress network interfaces that can carry traffic on this SDP are
         inconsistent."
    ::= { sdpInfoEntry 52 }

sdpBgpTunnelEnabled  OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpBgpTunnelEnabled specifies whether
                     the transport tunnel is BGP as opposed to LDP or
                     RSVP signalled LSPs.

                     This value cannot be set to 'true' if sdpLdpEnabled is
                     'true' or if there is at least one RSVP or static LSP
                     provisioned.

                     This object applies to MPLS SDPs."
    DEFVAL { false }
    ::= { sdpInfoEntry 53 }

sdpBgpTunnelLspId    OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpBgpTunnelLspId indicates the Id for the
                     BGP Tunnel LSP if sdpBgpTunnelEnabled is set to 'true'
                     and there is a valid LDP route to the sdpFarEndIpAddress."
    ::= { sdpInfoEntry 54 }

sdpTunnelFarEndIpAddress OBJECT-TYPE
    SYNTAX          IpAddress
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpTunnelFarEndIpAddress specifies the
                     IP address of the remote end of the tranport tunnel for
                     this SDP.

                     The value can only be changed while the admin status
                     of the SDP is 'down'."
    ::= { sdpInfoEntry 55 }

sdpActiveLspType OBJECT-TYPE
    SYNTAX          INTEGER {
                        not-applicable (0),
                        rsvp           (1),
                        ldp            (2),
                        bgp            (3),
                        none           (4)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpActiveLspType indicates the type of LSP
                     that is currently active on this SDP.

                     For sdpDelivery 'gre', the value is always
                     'not-applicable'.

                     For sdpDelivery 'mpls', the values can be
                     'rsvp', 'ldp', 'bgp' or 'none'."
    ::= { sdpInfoEntry 56 }

sdpBindingPort OBJECT-TYPE
    SYNTAX           TmnxPortID
    MAX-ACCESS       read-create
    STATUS           current
    DESCRIPTION      "The value of sdpBindingPort specifies the port id for
                      the binding on this SDP.

                      The value of sdpPwPortOperStatus will be set to 'down' of
                      all the related SDP pseudo-wire ports, if the SDP
                      resolves to another port than the one specified here.

                      An 'inconsistentValue' error is returned when this object
                      is set to a non-default value when sdpDelivery is set to
                      'gre'."
    DEFVAL { '1e000000'H } -- invalid port-id
    ::= { sdpInfoEntry 57 }

sdpFarEndNodeId OBJECT-TYPE
    SYNTAX          TmnxMplsTpNodeID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpFarEndNodeId specifies the node identifier
                     of the far-end for this sdp.

                     The value of this object must be set to a non-default value
                     when the sdpDelivery is set to 'mpls' for the
                     row to become 'active', and can only be changed while the
                     admin status of the SDP is 'down'."
    DEFVAL { 0 }
    ::= { sdpInfoEntry 58 }

sdpFarEndGlobalId OBJECT-TYPE
    SYNTAX          TmnxMplsTpGlobalID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpFarEndGlobalId specifies the global
                     identifier of the far-end for this sdp."
    DEFVAL { 0 }
    ::= { sdpInfoEntry 59 }
-- -------------------------
-- SDP Bind Table
-- -------------------------
sdpBindTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpBindEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "A table that contains SDP binding information."
    ::= { tnSdpObjs 4 }

sdpBindEntry OBJECT-TYPE
    SYNTAX          SdpBindEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Information about a specific SDP binding."
    INDEX           { tnSysSwitchId, tnSvcId, sdpBindId }
    ::= { sdpBindTable 1 }

SdpBindEntry ::=
    SEQUENCE {
        sdpBindId                           SdpBindId,
        sdpBindRowStatus                    RowStatus,
        sdpBindAdminIngressLabel            Unsigned32,
        sdpBindAdminEgressLabel             Unsigned32,
        sdpBindOperIngressLabel             Unsigned32,
        sdpBindOperEgressLabel              Unsigned32,
        sdpBindAdminStatus                  ServiceAdminStatus,
        sdpBindOperStatus                   INTEGER,
        sdpBindLastMgmtChange               TimeStamp,
        sdpBindType                         INTEGER,
        sdpBindIngressMacFilterId           TFilterID,
        sdpBindIngressIpFilterId            TFilterID,
        sdpBindEgressMacFilterId            TFilterID,
        sdpBindEgressIpFilterId             TFilterID,
        sdpBindVpnId                        VpnId,
        sdpBindCustId                       TmnxCustId,
        sdpBindVcType                       SdpBindVcType,
        sdpBindVlanVcTag                    Unsigned32,
        sdpBindSplitHorizonGrp              ServObjName,
        sdpBindOperFlags                    BITS,
        sdpBindLastStatusChange             TimeStamp,
        sdpBindIesIfIndex                   InterfaceIndexOrZero,
        sdpBindMacPinning                   TmnxEnabledDisabled,
        sdpBindIngressIpv6FilterId          TFilterID,
        sdpBindEgressIpv6FilterId           TFilterID,
        sdpBindCollectAcctStats             TruthValue,
        sdpBindAccountingPolicyId           Unsigned32,
        sdpBindPwPeerStatusBits             BITS,
        sdpBindPeerVccvCvBits               BITS,
        sdpBindPeerVccvCcBits               BITS,
        sdpBindControlWordBit               TruthValue,
        sdpBindOperControlWord              TruthValue,
        sdpBindEndPoint                     ServObjName,
        sdpBindEndPointPrecedence           Unsigned32,
        sdpBindIsICB                        TruthValue,
        sdpBindPwFaultInetAddressType       InetAddressType,
        sdpBindPwFaultInetAddress           InetAddress,
        sdpBindClassFwdingOperState         TmnxOperState,
        sdpBindForceVlanVcForwarding        TruthValue,
        sdpBindAdminBandwidth               SdpBindBandwidth,
        sdpBindOperBandwidth                SdpBindBandwidth,
        sdpBindCreationOrigin               L2RouteOrigin,
        sdpBindDescription                  TItemDescription,
        sdpBindSiteName                     TNamedItemOrEmpty,
        sdpBindHashLabel                    TruthValue,
        sdpBindIsaAaApplicationProfile      ServObjName,
        sdpBindStandbySigSlave              TruthValue,
        sdpBindHashLabelSignalCapability    TruthValue,
        sdpBindIngressFlowspec              TruthValue,
        sdpBindCpmProtPolicyId              TCpmProtPolicyID,
        sdpBindCpmProtMonitorMac            TruthValue,
        sdpBindCpmProtEthCfmMonitorFlags    BITS,
        sdpBindTransitIpPolicyId            TmnxBsxTransitIpPolicyIdOrZero,
        sdpBindPwStatusSignaling            TruthValue,
        sdpBindOperGrp                      TNamedItemOrEmpty,
        sdpBindMonitorOperGrp               TNamedItemOrEmpty,
        sdpBindOperHashLabel                TruthValue,
        sdpBindTransitPrefixPolicyId        TmnxBsxTransPrefPolicyIdOrZero,
        sdpBindAarpId                       TmnxBsxAarpIdOrZero,
        sdpBindIngressQoSNetworkPlcyId      TSdpIngressPolicyID,
        sdpBindEgressQoSNetworkPlcyId       TSdpEgressPolicyID,
        sdpBindIngressQoSFpRedirectQGrp     TNamedItemOrEmpty,
        sdpBindEgressQoSPortRedirectQGrp    TNamedItemOrEmpty,
        sdpBindIngressQoSInstanceId         TQosQGrpInstanceIDorZero,
        sdpBindEgressQoSInstanceId          TQosQGrpInstanceIDorZero,
        sdpBindAarpServRefType              TmnxBsxAarpServiceRefType,
        sdpBindPwLocalStatusBits            BITS,
        sdpBindBlockOnPeerFault             TruthValue
    }

sdpBindId OBJECT-TYPE
    SYNTAX          SdpBindId
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "SDP Binding identifier."
    ::= { sdpBindEntry 1 }

sdpBindRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object indicates the status of this row. The
                     only values supported during a set operation are
                     'createAndGo' and 'destroy'."
    ::= { sdpBindEntry 2 }

sdpBindAdminIngressLabel OBJECT-TYPE
    SYNTAX          Unsigned32 (0 | 1 | 2048..18431)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The static MPLS VC label used by the far-end device
                     to send packets to this device in this service via
                     this SDP. The value of sdpBindAdminIngressLabel is
                     1 when it is used by a mirror service. All mirror SDPs
                     use this label to avoid the unnecessary use of
                     additional labels."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 3 }

sdpBindAdminEgressLabel OBJECT-TYPE
    SYNTAX          Unsigned32 (0 | 16..1048575)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The static MPLS VC label used by this device to send
                     packets to the far-end device in this service via
                     this SDP."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 4 }

sdpBindOperIngressLabel OBJECT-TYPE
    SYNTAX          Unsigned32 (0 | 1..1048575)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The MPLS label used by the far-end device to send
                     packets to this device in this service via this SDP.
                     This label is either sdpBindAdminIngressLabel, if
                     not null, or the one obtained via the SDP's signaling
                     protocol."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 5 }

sdpBindOperEgressLabel OBJECT-TYPE
    SYNTAX          Unsigned32 (0 | 1..1048575)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The MPLS label used by this device to send packets
                     to the far-end device in this service via this SDP.
                     This label is either sdpBindAdminEgressLabel, if
                     not null, or the one obtained via the SDP's signaling
                     protocol."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 6 }

sdpBindAdminStatus OBJECT-TYPE
    SYNTAX          ServiceAdminStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The desired state of this Service-SDP binding."
    DEFVAL          { up }
    ::= { sdpBindEntry 7 }

sdpBindOperStatus OBJECT-TYPE
    SYNTAX          INTEGER {
                        up                 (1),
                        noEgressLabel      (2),
                        noIngressLabel     (3),
                        noLabels           (4),
                        down               (5),
                        svcMtuMismatch     (6),
                        sdpPathMtuTooSmall (7),
                        sdpNotReady        (8),
                        sdpDown            (9),
                        sapDown            (10)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpBindOperStatus indicates the operating status of
         this Service-SDP binding.
            'up'               The Service-SDP binding is operational.

            'noEgressLabel'    The ingress label is available but the
                               egress one is missing.

            'noIngressLabel'   The egress label is available but the
                               ingress one is not.

            'noLabels'         Both the ingress and the egress labels
                               are missing.

            'down'             The binding is administratively down.

            'svcMtuMismatch'   Both labels are available, but a service
                               MTU mismatch was detected between the local
                               and the far-end devices.

            'sdpPathMtuTooSmall' The operating path MTU of the corresponding
                                 SDP minus the size of the SDP Bind control
                                 word (if applicable) is smaller than the
                                 service MTU.

            'sdpNotReady'      The SDP's signaling session is down.

            'sdpDown'          The SDP is not operationally up.

            'sapDown'          The SAP associated with the service is down."
    ::= { sdpBindEntry 8 }

sdpBindLastMgmtChange OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sysUpTime at the time of the
                     most recent management-initiated change to
                     this Service-SDP binding."
    ::= { sdpBindEntry 9 }

sdpBindType OBJECT-TYPE
    SYNTAX          INTEGER {
                        spoke (1),
                        mesh  (2)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This object indicates whether this Service SDP
                     binding is a spoke or a mesh.  The value of this
                     object must be specified when the row is created
                     and cannot be changed while the row status is
                     'active'."
    DEFVAL          { mesh }
    ::= { sdpBindEntry 10 }

sdpBindIngressMacFilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The row index in the tMacFilterTable
                     corresponding to this ingress filter,
                     or zero if no filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 11 }

sdpBindIngressIpFilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The row index in the tIPFilterTable
                     corresponding to this ingress filter,
                     or zero if no filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 12 }

sdpBindEgressMacFilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The row index in the tMacFilterTable
                     corresponding to this egress filter,
                     or zero if no filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 13 }

sdpBindEgressIpFilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The row index in the tIPFilterTable
                     corresponding to this egress filter,
                     or zero if no filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 14 }

sdpBindVpnId OBJECT-TYPE
    SYNTAX          VpnId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The VPN ID of the associated service."
    ::= { sdpBindEntry 15 }

sdpBindCustId OBJECT-TYPE
    SYNTAX          TmnxCustId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The Customer ID of the associated service."
    ::= { sdpBindEntry 16 }

sdpBindVcType OBJECT-TYPE
    SYNTAX          SdpBindVcType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindVcType is an enumerated integer that specifies
         the type of virtual circuit (VC) associated with the SDP binding.

         The value 'vpls' is no longer supported."
    ::= { sdpBindEntry 17 }

sdpBindVlanVcTag OBJECT-TYPE
    SYNTAX          Unsigned32 ('0000'H..'0fff'H)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "."
    DEFVAL          { '0fff'H }
    ::= { sdpBindEntry 18 }

sdpBindSplitHorizonGrp OBJECT-TYPE
    SYNTAX          ServObjName
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "This value of the object sdpBindSplitHorizonGrp specifies
                     the name of the split-horizon group where the spoke SDP
                     Bind belongs to. This object can be set only at the time
                     the row is created. Per default a spoke SDP Bind does not
                     belong to any split-horizon group. The name specified must
                     correspond to an existing split-horizon group in the TLS
                     service where this spoke SDP Bind is defined."
    DEFVAL          { "" }
    ::= { sdpBindEntry 19 }

sdpBindOperFlags OBJECT-TYPE
    SYNTAX          BITS {
                        sdpBindAdminDown       (0), -- SDP Bind is admin down
                        svcAdminDown           (1), -- Service is admin down
                        sapOperDown            (2), -- SAP is oper down
                                                    -- (VLL's only)
                        sdpOperDown            (3), -- SDP is oper down
                        sdpPathMtuTooSmall     (4), -- SDP's path MTU minus SDP
                                                    -- Bind control word size is
                                                    -- less than Service MTU
                        noIngressVcLabel       (5), -- No ingress VC label
                        noEgressVcLabel        (6), -- No egress VC label
                        svcMtuMismatch         (7), -- Service MTU mismatch with
                                                    -- the remote PE
                        vcTypeMismatch         (8), -- VC type mismatch with the
                                                    -- remote PE
                        relearnLimitExceeded   (9), -- MAC relearn limit was
                                                    -- exceeded (TLS only)
                        iesIfAdminDown         (10),-- IP interface is admin
                                                    -- down (IES and VPRN only)
                        releasedIngressVcLabel (11),-- Peer released our ingress
                                                    -- VC label
                        labelsExhausted        (12),-- Label Manager has ran out
                                                    -- of labels
                        svcParamMismatch       (13),-- Service-specific
                                                    -- parameter mismatch
                        insufficientBandwidth  (14),-- Insufficient bandwidth to
                                                    -- allocate to SDP binding
                        pwPeerFaultStatusBits  (15),-- Received PW fault status
                                                    -- bits from peer
                        meshSdpDown            (16),-- Mesh SDP Down
                        notManagedByMcRing     (17),-- Not managed by mc-ring
                        outOfResource          (18),-- Such as memory
                        mhStandby              (19),-- Standby due to BGP
                                                    -- multi-home protocol
                        oamDownMepFault        (20),-- ETH-CFM down MEP fault
                                                    -- detected.
                        oamUpMepFault          (21),-- ETH-CFM up MEP fault
                                                    -- detected.
                        standbySigSlaveTxDown  (22),-- Transmit is down for
                                                    -- standby-sig-spoke.
                        operGrpDown            (23),-- Operational group is down
                        withdrawnIngressVcLabel(24),-- Ingress label withdrawn
                                                    -- due to incompatibility.
                        vplsPmsiDown           (25),-- provider-tunnel down
                        recProtSrcMac          (26),-- Received a packet with a
                                                    -- protected source MAC
                        peerFaultStatusTxDown  (27) -- Transmit is down because
                                                    -- block-on-peer-fault is
                                                    -- enabled and received PW
                                                    -- faults status from peer
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "This object specifies all the conditions that affect the
                     operating status of this SDP Bind.

                     The bit values are as follows:

             sdpBindAdminDown        (0) - SDP Bind is admin down.
             svcAdminDown            (1) - Service is admin down.
             sapOperDown             (2) - SAP is oper down (VLL's only).
             sdpOperDown             (3) - SDP is oper down.
             sdpPathMtuTooSmall      (4) - SDP's path MTU minus SDP Bind control
                                           word size is less than Service MTU.
             noIngressVcLabel        (5) - No ingress VC label.
             noEgressVcLabel         (6) - No egress VC label.
             svcMtuMismatch          (7) - Service MTU mismatch with the
                                           remote PE.
             vcTypeMismatch          (8) - VC type mismatch with the remote PE.
             relearnLimitExceeded    (9) - MAC relearn limit was exceeded
                                           (TLS only).
             iesIfAdminDown         (10) - IP interface is admin down
                                           (IES and VPRN only).
             releasedIngressVcLabel (11) - Peer released our ingress VC label.
             labelsExhausted        (12) - Label Manager has ran out of labels.
             svcParamMismatch       (13) - Service-specific parameter mismatch.
             insufficientBandwidth  (14) - Insufficient bandwidth to allocate
                                           to SDP binding.
             pwPeerFaultStatusBits  (15) - Received PW fault status bits from
                                           peer.
             meshSdpDown            (16) - Mesh SDP Down.
             notManagedByMcRing     (17) - Not managed by mc-ring.
             outOfResource          (18) - Such as memory.
             mhStandby              (19) - Standby due to BGP.
                                         - multi-home protocol.
             oamDownMepFault        (20) - ETH-CFM down MEP fault detected.
             oamUpMepFault          (21) - ETH-CFM up MEP fault detected.
             standbySigSlaveTxDown  (22) - Transmit is down for
                                         - standby-sig-spoke.
             operGrpDown            (23) - Operational group is down.
             withdrawnIngressVcLabel(24) - Withdrawn due to Incompatiblity.
             vplsPmsiDown           (25),- provider-tunnel down.
             recProtSrcMac          (26) - Received a packet with a
                                         - protected source MAC.
             peerFaultStatusTxDown  (27) - Transmit is down because
                                         - block-on-peer-fault is
                                         - enabled and received PW
                                         - faults status from peer
             "
    ::= { sdpBindEntry 20 }

sdpBindLastStatusChange OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindLastStatusChange specifies
                     the value of sysUpTime at the time of the most recent
                     operating status change to this SDP Bind."
    ::= { sdpBindEntry 21 }

sdpBindIesIfIndex OBJECT-TYPE
    SYNTAX          InterfaceIndexOrZero
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "When this SDP Bind is defined on an IES service
                     and the value of sdpBindType is 'spoke', this
                     object specifies the index of the associated IES
                     interface. The value of this object can be set
                     only when the row is created and cannot be changed
                     while the row status is 'active'. This object is
                     otherwise not significant and should have
                     the value zero."
    ::= { sdpBindEntry 22 }

sdpBindMacPinning OBJECT-TYPE
    SYNTAX          TmnxEnabledDisabled
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindMacPinning specifies
                     whether or not MAC address pinning is active on this SDP
                     bind (mesh or spoke). Setting the value to enable disables
                     re-learning of MAC addresses on other SAPs or SDPs
                     within the same VPLS; the MAC address will hence
                     remain attached to the SDP Bind for the duration of
                     its age-timer. This object has effect only for MAC
                     addresses learned via the normal MAC learning
                     process, and not for entries learned via DHCP. The
                     value will be set by default to disabled. However for
                     a spoke SDP that belongs to a residential SHG, the
                     value is set to enabled by the system, and cannot be
                     altered by the operator. This object applies to spoke-SDP
                     associated with the service with svcType set to
                     'tls'."
    ::= { sdpBindEntry 23 }

sdpBindIngressIpv6FilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindIngressIpv6FilterId
                     specifies the row index in the tIPv6FilterTable
                     corresponding to this ingress ipv6 filter,
                     or zero if no ipv6 filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 24 }

sdpBindEgressIpv6FilterId OBJECT-TYPE
    SYNTAX          TFilterID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindEgressIpv6FilterId
                     specifies the row index in the tIPv6FilterTable
                     corresponding to this egress ipv6 filter,
                     or zero if no ipv6 filter is specified."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 25 }

sdpBindCollectAcctStats OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindCollectAcctStats specifies
                     whether the agent collects accounting statistics for this
                     SDP bind. When the value is 'true' the agent
                     collects accounting statistics on this SDP bind."
    DEFVAL          { false }
    ::= { sdpBindEntry 26 }

sdpBindAccountingPolicyId OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpBindAccountingPolicyId specifies the
                     policy to use to collect accounting statistics on
                     this SDP bind. The value zero indicates that the
                     agent should use the default accounting policy,
                     if one exists."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 27 }

sdpBindPwPeerStatusBits OBJECT-TYPE
    SYNTAX          BITS {
                        pwNotForwarding (0),     -- Pseudo Wire Not Forwarding
                        lacIngressFault (1),     -- Local Attachment Circuit Rx
                                                 -- Fault
                        lacEgresssFault (2),     -- Local Attachment Circuit Tx
                                                 -- Fault
                        psnIngressFault (3),     -- Local PSN-facing PW Rx Fault
                        psnEgressFault  (4),     -- Local PSN-facing PW Tx Fault
                        pwFwdingStandby (5)      -- Pseudo Wire in Standby mode
                    }
    MAX-ACCESS      read-only
    STATUS          current
        DESCRIPTION     "sdpBindPwPeerStatusBits indicates the bits set by the LDP
                         peer when there is a fault on its side of the pseudowire.
                     LAC failures occur on the SAP that has been configured on
                     the PIPE service, PSN bits are set by SDP-binding failures
                     on the PIPE service.  The pwNotForwarding bit is set when
                     none of the above failures apply, such as an MTU mismatch
                     failure.  This value is only applicable if the peer is
                     using the pseudowire status signalling method to indicate
                     faults."
    ::= { sdpBindEntry 28 }

sdpBindPeerVccvCvBits OBJECT-TYPE
    SYNTAX          BITS {
                        icmpPing                       (0),
                        lspPing                        (1),
                        bfdFaultDetection              (2),
                        bfdFaultDetectionAndSignalling (3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "sdpBindPeerVccvCvBits indicates the CV type bits set by the
                     LDP peer if it supports VCCV (Virtual Circuit Connection
                     Verification) on a pseudowire.  If the peer does not send
                     VCCV information, or does not support it, the bits will
                     be set to 0."
    ::= { sdpBindEntry 29 }

sdpBindPeerVccvCcBits OBJECT-TYPE
    SYNTAX          BITS {
                        pwe3ControlWord          (0),
                        mplsRouterAlertLabel     (1),
                        mplsPwDemultiplexorLabel (2)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "sdpBindPeerVccvCcBits indicates the CC type bits set by the
                     LDP peer if it supports VCCV (Virtual Circuit Connection
                     Verification) on a pseudowire.  If the peer does not send
                     VCCV information, or does not support it, the bits will
                     all be 0."
    ::= { sdpBindEntry 30 }

sdpBindControlWordBit  OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION     "sdpBindControlWordBit specifies whether the use of the
                     'ControlWord' is preferred or not. The value of
                     sdpBindControlWordBit is exchanged with LDP peer during
                     pseudowire negotiation time. The default value is
                     determined by sdpBindVcType. sdpBindVcType of atmSdu and
                     frDlci must have default value of 'true'. Other values of
                     sdpBindVcType must have default value of 'false'."
    ::= { sdpBindEntry 31 }

sdpBindOperControlWord  OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION     "sdpBindOperControlWord indicates whether the 'ControlWord'
                     is used or not. The value of sdpBindOperControlWord is
                     negotiated with the LDP peer.  When both the local and the
                     peer prefer the use of the 'ControlWord', sdpBindOperControlWord
                     has the value of 'true'."
    ::= { sdpBindEntry 32 }

sdpBindEndPoint         OBJECT-TYPE
    SYNTAX      ServObjName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "sdpBindEndPoint specifies the service endpoint to which
                     this SDP bind is attached. The tnSvcId of the SDP bind MUST
                     match the tnSvcId of the service endpoint."
    DEFVAL      { "" }
    ::= { sdpBindEntry 33 }

sdpBindEndPointPrecedence       OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "sdpBindEndPointPrecedence specifies the precedence of this
                     SDP bind when there are multiple SDP binds attached to one
                     service endpoint. The value 0 can only be assigned to one
                     SDP bind, making it the primary SDP bind. When an SDP bind
                     goes down, the next highest precedence SDP bind begins
                     forwarding traffic."
    DEFVAL      { 4 }
    ::= { sdpBindEntry 34 }

sdpBindIsICB    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "sdpBindIsICB specifies whether this sdpBind is an
                     inter-chassis backup SDP bind."
    DEFVAL      { false }
    ::= { sdpBindEntry 35 }

sdpBindPwFaultInetAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of the object sdpBindPwFaultInetAddressType
                     indicates the address type of sdpBindPwFaultInetAddress."
    ::= { sdpBindEntry 36 }

sdpBindPwFaultInetAddress    OBJECT-TYPE
    SYNTAX          InetAddress  (SIZE(0|4|16))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpBindPwFaultInetAddress indicates the IP
                     address that was included in the pseudowire status
                     message sent by the LDP peer.  This value is only
                     applicable if the peer is using the pseudowire status
                     signalling method to indicate faults."
    ::= { sdpBindEntry 37 }

sdpBindClassFwdingOperState     OBJECT-TYPE
    SYNTAX          TmnxOperState
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpBindClassFwdingOperState indicates the
                     operational state of forwarding-class based forwarding
                     on this sdpBind.

                     When the SDP this sdpBind is bound to has
                     sdpClassFwdingEnabled set to 'false', the value of
                     sdpBindClassFwdingOperState is 'outOfService'.

                     When the SDP this sdpBind is bound to has
                     sdpClassFwdingEnabled set to 'true' and the svcType
                     of the service this sdpBind is defined on is 'tls',
                     'vprn', or 'ies', the value of
                     sdpBindClassFwdingOperState is 'inService'. If the
                     service has svcVcSwitching set to 'true', the value
                     of sdpBindClassFwdingOperState is 'inService'

                     When the SDP this sdpBind is bound to has
                     sdpClassFwdingEnabled set to 'true' and the svcType
                     of the service this sdpBind is defined on is 'epipe',
                     'apipe', 'fpipe', or 'ipipe' with no SAP
                     defined on the service, the value of
                     sdpBindClassFwdingOperState is 'unknown'. If the
                     service has a SAP with a NULL
                     sapIngressSharedQueuePolicy, the value of
                     sdpBindClassFwdingOperState is 'outOfService'. If the
                     service has a SAP with a non-NULL
                     sapIngressSharedQueuePolicy, the value of
                     sdpBindClassFwdingOperState is 'inService'."
     ::= { sdpBindEntry 38 }

sdpBindForceVlanVcForwarding OBJECT-TYPE
    SYNTAX           TruthValue
    MAX-ACCESS       read-create
    STATUS           current
    DESCRIPTION
        "The value of sdpBindForceVlanVcForwarding specifies whether or not
        vc-vlan-type forwarding is forced in the data-path for the sdp which
        have sdpBindVcType set to 'ether'.  When set to 'true'
        vc-vlan-type forwarding is forced.

        An 'inconsistentValue' error is returned when an attempt is made to set
        the value of sdpBindForceVlanVcForwarding to 'true' and sdpBindVcType is
        not set to 'ether'."
    DEFVAL          { false }
    ::= { sdpBindEntry 39 }

sdpBindAdminBandwidth    OBJECT-TYPE
    SYNTAX      SdpBindBandwidth
    UNITS       "kilo-bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "The value of the object sdpBindAdminBandwidth specifies the
                     bandwidth that needs to be reserved for this SDP binding in
                     kilo-bits per second. The SdpBindBandwidth object only applies
                     to the SDP bindings under the epipe(1), apipe(7), fpipe(8),
                     ipipe(9) and cpipe(10) services."
    DEFVAL          { 0 }
    ::= { sdpBindEntry 40 }

sdpBindOperBandwidth    OBJECT-TYPE
    SYNTAX      SdpBindBandwidth
    UNITS       "kilo-bits per second"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION     "The value of the object sdpBindOperBandwidth indicates the
                     bandwidth that has been reserved for this SDP binding in
                     kilo-bits per second. The value 0 indicates that SDP doesn't
                     have bandwidth to satisfy the bandwidth requirement of this
                     SDP binding. The sdpBindOperBandwidth object only applies
                     to the SDP bindings under the epipe(1), apipe(7), fpipe(8),
                     ipipe(9) and cpipe(10) services."
    ::= { sdpBindEntry 41 }

sdpBindCreationOrigin   OBJECT-TYPE
    SYNTAX          L2RouteOrigin
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpBindCreationOrigin indicates the protocol or
                     mechanism which created this SDP binding."
    ::= { sdpBindEntry 42 }

sdpBindDescription        OBJECT-TYPE
    SYNTAX          TItemDescription
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpBindDescription specifies a
                     user-provided description for the SDP Bind."
    DEFVAL          { "" }
    ::= { sdpBindEntry 43 }

sdpBindSiteName OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The value of sdpBindSiteName indicates the site-name
                     associated with this SDP Bind."
    ::= { sdpBindEntry 44 }

sdpBindHashLabel        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "The value of sdpBindHashLabel specifies whether the use of
                     hash-label is enabled or not on this SDP Bind."
    DEFVAL      { false }
    ::= { sdpBindEntry 45 }

sdpBindIsaAaApplicationProfile OBJECT-TYPE
    SYNTAX          ServObjName
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpBindIsaAaApplicationProfile specifies
                     the ISA-AA application profile for this sdp. The
                     specified application profile needs to exist in the
                     TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
    DEFVAL          { "" }
    ::= { sdpBindEntry  46 }

sdpBindStandbySigSlave     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "The value of sdpBindStandbySigSlave specifies whether
                     transmission of the spoke will be blocked when the spoke
                     receives standby status notification from its peer."
    DEFVAL      { false }
    ::= { sdpBindEntry 47 }

sdpBindHashLabelSignalCapability  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION     "The value of sdpBindHashLabel specifies whether to signal
                     the hash label capability to the remote PE.

                     The default value is 'false' and cannot be changed unless
                     sdpBindHashLabel is set to 'true'."
    DEFVAL      { false }
    ::= { sdpBindEntry 48 }

sdpBindIngressFlowspec   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindIngressFlowspec specifies whether ingress Flowspec
         is enabled for this sdp."
    DEFVAL { false }
    ::= { sdpBindEntry 49 }

sdpBindCpmProtPolicyId  OBJECT-TYPE
    SYNTAX          TCpmProtPolicyID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindCpmProtPolicyId specifies the CPM protection policy
         for this SDP binding.

         Zero specifies that no CPM protection policy is associated with this
         SDP binding.  A non-zero value must be the index of an active
         tmnxCpmProtPolTable row.

         If the SDP binding can support Eth-CFM MEPs or MIPs, the default CPM
         protection policy is 255 (which is the default CPU protection policy
         for a network interface).  Zero is not supported in this case.

         If the SDP binding cannot support Eth-CFM MEPs or MIPs, the default CPM
         protection policy is zero.  Changing the CPM protection policy value
         is not supported in this case."
    DEFVAL { 255 }
    ::= { sdpBindEntry 50 }

sdpBindCpmProtMonitorMac OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindCpmProtMonitorMac specifies whether the
         tmnxCpmProtPolPerSrcRateLimit of the CPM protection policy (as
         specified by sdpBindCpmProtPolicyId) must be applied.

         If the value of sdpBindCpmProtMonitorMac is 'true', the per-source rate
         limit must be applied.

         If the value of sdpBindCpmProtPolicyId is zero, the value of
         sdpBindCpmProtMonitorMac is irrelevant and will be ignored.

         At most one of sdpBindCpmProtMonitorMac and the
         sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be enabled
         for this SDP binding."
    DEFVAL { false }
    ::= { sdpBindEntry 51 }

sdpBindCpmProtEthCfmMonitorFlags   OBJECT-TYPE
    SYNTAX      BITS {
        ethCfmMonitor(0),
        ethCfmMonitorAggregate(1),
        ethCfmMonitorCommittedAccessRate(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not
         to apply rate limiting (using the tmnxCpmProtEthCfmPolTable
         configuration) to Ethernet Connectivity Fault Management (Eth-CFM)
         packets served by the SDP binding.  Two associated options are also
         specified.

         Five combinations of flag values are supported, as shown in the
         following table.

         Flag                                    Value (0=Disabled, 1=Enabled)
         -------------------------------------   -----------------------------
         'ethCfmMonitor(0)'                      0   0   0   0   1   1   1   1
         'ethCfmMonitorAggregate(1)'             0   0   1   1   0   0   1   1
         'ethCfmMonitorCommittedAccessRate(2)'   0   1   0   1   0   1   0   1
         -------------------------------------   -----------------------------
         Supported Combination?                  Y   N   N   N   Y   Y   Y   Y

         If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on
         this SDP binding.

         If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
         this SDP binding.  Excess packets are discarded.  The configured
         information used to perform the Eth-CFM rate limiting (e.g. the rate
         limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by
         the SDP binding's sdpBindCpmProtPolicyId.

         At most one of 'ethCfmMonitor(0)' and sdpBindCpmProtMonitorMac can be
         enabled for this SDP binding.

         The flags 'ethCfmMonitorAggregate(1)' and
         'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
         rate limiting.  Therefore, they are only significant if Eth-CFM rate
         limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled).  The
         remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.

         If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
         (i.e. on a source MAC address basis).  For example, if the SDP
         binding's rate limit for all Eth-CFM packets is 100 packets/sec, and
         two peers are served by the SDP binding, then 100 Eth-CFM packets/sec
         from each peer is within the limit.

         If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
         packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
         aggregated traffic flow.  For example, if the SDP binding's rate limit
         for all Eth-CFM packets is 100 packets/sec, and two peers are served by
         this SDP binding, then the combined rate of the two peers cannot exceed
         100 packets/sec.

         'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
         between two features:  Eth-CFM rate limiting, and overall rate limiting
         (as configured using tmnxCpmProtPolOverallRateLimit).

         If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
         packet is subjected to two rate limits, in the following order.
         a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
            described above.  If the packet exceeds the limit, it is discarded.
            Otherwise...
         b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied
            to Eth-CFM packets, and the other rate limited packet types) is
            applied.

         If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
         is subjected to one rate limit:  the applicable
         tmnxCpmProtEthCfmPolRateLimit, as described above.  Eth-CFM packets
         are neither counted nor discarded when performing the
         tmnxCpmProtPolOverallRateLimit rate limiting."
    DEFVAL { {} }
    ::= { sdpBindEntry 52 }

sdpBindTransitIpPolicyId     OBJECT-TYPE
    SYNTAX      TmnxBsxTransitIpPolicyIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindTransitIpPolicyId specifies the transit IP
         policy to be associated with this SDP binding. The value must
         either be '0' indicating an invalid transit IP policy or the
         specified transit IP policy needs to exist in the
         TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable.

         At most one of sdpBindTransitIpPolicyId and
         sdpBindTransitPrefixPolicyId can be non-zero."
    DEFVAL { 0 }
    ::= { sdpBindEntry 53 }

sdpBindPwStatusSignaling    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindPwStatusSignaling specified whether this SDP
         binding supports pseudowire status signaling.

         Default value depends on the type of service:
         - For VPLS services it is 'true' and configurable.
         - For EPIPE services it is 'true' and configurable.
         - For all other VLL services it is 'true' but not configurable.
         - For Mirror services it is 'true' but not configurable.
         - For IES/VPRN services it is 'true' but not configurable.
         - For all other services it is 'false' and not configurable.

         An 'inconsistentValue' error is returned when an attempt is made to
         change this value for a SDP binding that is not configurable."
    ::= { sdpBindEntry 54 }

sdpBindOperGrp OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the sdpBindOperGrp specifies the
                     Operational-Group identifier associated with this SDP
                     Bind.

                     An 'inconsistentValue' error is returned when
                     both sdpBindOperGrp and sdpBindMonitorOperGrp are set
                     together and atleast one of them to a non-default value."
    DEFVAL { "" }
    ::= { sdpBindEntry 55 }

sdpBindMonitorOperGrp OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of the sdpBindMonitorOperGrp specifies the
                     Operational-Group identifier which will affect the state
                     of this SDP Bind.

                     An 'inconsistentValue' error is returned when
                     both sdpBindOperGrp and sdpBindMonitorOperGrp are set
                     together and atleast one of them to a non-default value."
    DEFVAL { "" }
    ::= { sdpBindEntry 56 }

sdpBindOperHashLabel  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION     "The value of sdpBindOperHashLabel indicates the
                     negotiated value of hash label that is used on this SDP
                     binding.

                     If the value of sdpBindHashLabel is set to 'true' but
                     the value of sdpBindHashLabelSignalCapability is set to
                     'false' then sdpBindOperHashLabel will be 'true'.

                     If the value of sdpBindHashLabelSignalCapability set to
                     'true' then the value of sdpBindOperHashLabel is 'true'
                     if peer capability is 'true' and the 7xxx SR router
                     hardware supports this capability.

                     If the service has svcVcSwitching set to 'true', the value
                     of sdpBindOperHashLabel will be 'true' if peer capability
                     is 'true' and the 7xxx SR router hardware supports this
                     capability."
    ::= { sdpBindEntry 57 }

sdpBindTransitPrefixPolicyId  OBJECT-TYPE
    SYNTAX      TmnxBsxTransPrefPolicyIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindTransitPrefixPolicyId specifies the transit prefix
         policy to be associated with this SDP binding. The value must
         either be '0' indicating an invalid transit prefix policy or the
         specified transit prefix policy needs to exist in the
         TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable.

         At most one of sdpBindTransitIpPolicyId and
         sdpBindTransitPrefixPolicyId can be non-zero."
    DEFVAL { 0 }
    ::= { sdpBindEntry 58 }

sdpBindAarpId   OBJECT-TYPE
    SYNTAX      TmnxBsxAarpIdOrZero
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindAarpId specifies the AA Redundancy
         Protocol (AARP) instance associated with this SDP binding.
         If set to 0, no AARP instance is associated with
         this SDP binding."
    DEFVAL { 0 }
    ::= { sdpBindEntry 59 }

sdpBindIngressQoSNetworkPlcyId OBJECT-TYPE
    SYNTAX          TSdpIngressPolicyID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of the sdpBindIngressQoSNetworkPlcyId specifies the
         ingress QoS network policy applied to this SDP binding."
    DEFVAL { 0 }
    ::= { sdpBindEntry 60 }

sdpBindEgressQoSNetworkPlcyId OBJECT-TYPE
    SYNTAX          TSdpEgressPolicyID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of the sdpBindEgressQoSNetworkPlcyId specifies the
         egress QoS network policy applied to this SDP binding."
    DEFVAL { 0 }
    ::= { sdpBindEntry 61 }

sdpBindIngressQoSFpRedirectQGrp OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindIngressQoSFpRedirectQGrp specifies the
         forwarding-plane queue group Policy for this SDP binding.

         This object must be set along with
         sdpBindIngressQoSNetworkPlcyId object."
    DEFVAL { "" }
    ::= { sdpBindEntry 62 }

sdpBindEgressQoSPortRedirectQGrp OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindEgressQoSPortRedirectQGrp specifies the
         forwarding-plane queue group Policy for this SDP binding.

         This object must be set along with
         sdpBindEgressQoSNetworkPlcyId object."
    DEFVAL { "" }
    ::= { sdpBindEntry 63 }

sdpBindIngressQoSInstanceId  OBJECT-TYPE
    SYNTAX          TQosQGrpInstanceIDorZero
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindIngressQoSInstanceId specifies the
         instance of the forwarding-plane ingress Queue Group for this SDP
         binding."
    DEFVAL { 0 }
    ::= { sdpBindEntry 64 }

sdpBindEgressQoSInstanceId  OBJECT-TYPE
    SYNTAX          TQosQGrpInstanceIDorZero
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindEgressQoSInstanceId specifies the
         instance of the forwarding-plane egress Queue Group for this SDP
         binding."
    DEFVAL { 0 }
    ::= { sdpBindEntry 65 }

sdpBindAarpServRefType  OBJECT-TYPE
    SYNTAX      TmnxBsxAarpServiceRefType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of sdpBindAarpServRefType specifies the role of
         the Spoke SDP referenced by the Redundancy Protocol (AARP)
         instance identified by sdpBindAarpId. If sdpBindAarpId
         is the invalid AARP instance '0', then the
         service reference type is 'none(0)'."
    DEFVAL { none }
    ::= { sdpBindEntry 66 }

sdpBindPwLocalStatusBits OBJECT-TYPE
    SYNTAX          BITS {
                        pwNotForwarding (0),    -- Pseudo Wire Not Forwarding
                        lacIngressFault (1),    -- Local Attachment Circuit Rx
                                                -- Fault
                        lacEgresssFault (2),    -- Local Attachment Circuit Tx
                                                -- Fault
                        psnIngressFault (3),    -- Local PSN-facing PW Rx Fault
                        psnEgressFault  (4),    -- Local PSN-facing PW Tx Fault
                        pwFwdingStandby (5)     -- Pseudo Wire in Standby mode
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "sdpBindPwLocalStatusBits indicates the bits set locally
                     when there is a fault.
                     LAC failures occur on the SAP that has been configured on
                     the PIPE service, PSN bits are set by SDP-binding failures
                     on the PIPE service.  The pwNotForwarding bit is set when
                     none of the above failures apply, such as an MTU mismatch
                     failure.  This value is sent to the peer via pseudowire
                     status signalling method to indicate faults only if
                     sdpBindPwStatusSignaling is set to true."
    ::= { sdpBindEntry 67 }

sdpBindBlockOnPeerFault OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The sdpBindBlockOnPeerFault specifies whether to block the user
         traffic on this SDP bind when peer pw status has fault bits set."
    DEFVAL      { false }
    ::= { sdpBindEntry 68 }


-- ----------------------------------
-- Base SDP Binding Statistics Table
-- ----------------------------------
sdpBindBaseStatsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpBindBaseStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "A table that contains basic SDP Binding
                     statistics."
    ::= { tnSdpObjs 5 }

sdpBindBaseStatsEntry OBJECT-TYPE
    SYNTAX          SdpBindBaseStatsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Basic statistics about a specific SDP
                     Binding."
    INDEX           { tnSysSwitchId, tnSvcId, sdpBindId }
    ::= { sdpBindBaseStatsTable 1 }

SdpBindBaseStatsEntry ::=
    SEQUENCE {
        sdpBindBaseStatsIngressForwardedPackets  Counter64,
        sdpBindBaseStatsIngressDroppedPackets    Counter64,
        sdpBindBaseStatsEgressForwardedPackets   Counter64,
        sdpBindBaseStatsEgressForwardedOctets    Counter64,
        sdpBindBaseStatsCustId                   TmnxCustId,
        sdpBindBaseStatsIngFwdOctets             Counter64,
        sdpBindBaseStatsIngDropOctets            Counter64
    }

sdpBindBaseStatsIngressForwardedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 1 }

sdpBindBaseStatsIngressDroppedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 2 }

sdpBindBaseStatsEgressForwardedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 3 }

sdpBindBaseStatsEgressForwardedOctets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 4 }

sdpBindBaseStatsCustId OBJECT-TYPE
    SYNTAX          TmnxCustId
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "The Customer ID of the associated service."
    ::= { sdpBindBaseStatsEntry 5 }

sdpBindBaseStatsIngFwdOctets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 6 }

sdpBindBaseStatsIngDropOctets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "."
    ::= { sdpBindBaseStatsEntry 7 }

-- ------------------------------------------
-- TLS SDP Bind Table
-- ------------------------------------------
 sdpBindTlsTable OBJECT-TYPE
     SYNTAX          SEQUENCE OF SdpBindTlsEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "A table that contains TLS spoke SDP Bind
                      information."
     ::= { tnSdpObjs 6 }

 sdpBindTlsEntry OBJECT-TYPE
     SYNTAX          SdpBindTlsEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "TLS specific information about an SDP Bind."
     INDEX           { tnSysSwitchId, tnSvcId, sdpBindId }
     ::= { sdpBindTlsTable 1 }

 SdpBindTlsEntry ::=
     SEQUENCE {
--         sdpBindTlsStpAdminStatus        TmnxEnabledDisabled,
--         sdpBindTlsStpPriority           INTEGER,
--         sdpBindTlsStpPortNum            INTEGER,
--         sdpBindTlsStpPathCost           INTEGER,
--         sdpBindTlsStpRapidStart         TmnxEnabledDisabled,
--         sdpBindTlsStpBpduEncap          INTEGER,
--         sdpBindTlsStpPortState          TStpPortState,
--         sdpBindTlsStpDesignatedBridge   BridgeId,
--         sdpBindTlsStpDesignatedPort     Integer32,
--         sdpBindTlsStpForwardTransitions Gauge32,
--         sdpBindTlsStpInConfigBpdus      Gauge32,
--         sdpBindTlsStpInTcnBpdus         Gauge32,
--         sdpBindTlsStpInBadBpdus         Gauge32,
--         sdpBindTlsStpOutConfigBpdus     Gauge32,
--         sdpBindTlsStpOutTcnBpdus        Gauge32,
--         sdpBindTlsStpOperBpduEncap      INTEGER,
--         sdpBindTlsStpVpnId              VpnId,
--         sdpBindTlsStpCustId             TmnxCustId,
         sdpBindTlsMacAddressLimit       Integer32,
         sdpBindTlsNumMacAddresses       Integer32,
         sdpBindTlsNumStaticMacAddresses Integer32,
         sdpBindTlsMacLearning           TmnxEnabledDisabled,
         sdpBindTlsMacAgeing             TmnxEnabledDisabled,
--         sdpBindTlsStpOperEdge           TruthValue,
--         sdpBindTlsStpAdminPointToPoint  INTEGER,
--         sdpBindTlsStpPortRole           StpPortRole,
--         sdpBindTlsStpAutoEdge           TmnxEnabledDisabled,
--         sdpBindTlsStpOperProtocol       StpProtocol,
--         sdpBindTlsStpInRstBpdus         Gauge32,
--         sdpBindTlsStpOutRstBpdus        Gauge32,
         sdpBindTlsLimitMacMove          TlsLimitMacMove,
         sdpBindTlsDiscardUnknownSource  TmnxEnabledDisabled,
--         sdpBindTlsMvplsPruneState       MvplsPruneState,
--         sdpBindTlsMvplsMgmtService      TmnxServId,
--         sdpBindTlsMvplsMgmtSdpBndId     SdpBindId,
--         sdpBindTlsStpException          StpExceptionCondition,
         sdpBindTlsL2ptTermination       TmnxEnabledDisabled,
--         sdpBindTlsBpduTranslation       TlsBpduTranslation,
--         sdpBindTlsStpRootGuard          TruthValue,
--         sdpBindTlsStpInMstBpdus         Gauge32,
--         sdpBindTlsStpOutMstBpdus        Gauge32,
--         sdpBindTlsStpRxdDesigBridge     BridgeId,
--         sdpBindTlsMacMoveNextUpTime     Unsigned32,
--         sdpBindTlsMacMoveRateExcdLeft   Unsigned32,
--         sdpBindTlsLimitMacMoveLevel     TlsLimitMacMoveLevel,
--         sdpBindTlsBpduTransOper         INTEGER,
--         sdpBindTlsL2ptProtocols         L2ptProtocols,
         sdpBindTlsIgnoreStandbySig      TruthValue,
         sdpBindTlsBlockOnMeshFail       TruthValue
--         sdpBindTlsInTcBitBpdus          Counter32,
--         sdpBindTlsOutTcBitBpdus         Counter32,
--         sdpBindTlsRestProtSrcMac        TruthValue,
--         sdpBindTlsRestProtSrcMacAction  INTEGER,
--         sdpBindTlsAutoLearnMacProtect   TruthValue
     }
--
-- sdpBindTlsStpAdminStatus OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpAdminStatus specifies
--                      whether this SDP Bind participates in the TLS's Spanning
--                      Tree Protocol."
--     DEFVAL          { enabled }
--     ::= { sdpBindTlsEntry 1 }
--
-- sdpBindTlsStpPriority OBJECT-TYPE
--     SYNTAX          INTEGER (0..255)
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpPriority specifies
--                      the value of the port priority field which is contained
--                      in the most significant 4 bits of the 16-bit Port ID
--                      associated with this SDP Bind. As only the most
--                      significant 4 bits of the value are used, the
--                      actual value of this object is limited to
--                      multiples of 16: e.g. the agent rounds down
--                      the value to one of: 0, 16, 32, .. , 224, 240."
--     DEFVAL          { 128 }
--     ::= { sdpBindTlsEntry 2 }
--
-- sdpBindTlsStpPortNum OBJECT-TYPE
--     SYNTAX          INTEGER (0..4094)
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpPortNum specifies
--                      the value of the port number field which is contained in
--                      the least significant 12 bits of the 16-bit Port ID
--                      associated with this SDP Bind.
--                      Values in the range 2048..4094 are automatically
--                      assigned by the agent when the SDP Bind is created or
--                      when the value of this object is set to zero via
--                      management. Values in the range 1..2047 can be set
--                      via management, to allow this object to have a
--                      deterministic value across system reboots."
--     ::= { sdpBindTlsEntry 3 }
--
-- sdpBindTlsStpPathCost OBJECT-TYPE
--     SYNTAX          INTEGER (1..200000000)
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpPathCost specifies
--                      the contribution of this port to the path cost of paths
--                      towards the spanning tree root which include this port."
--     DEFVAL          { 10 }
--     ::= { sdpBindTlsEntry 4 }
--
-- sdpBindTlsStpRapidStart OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpRapidStart
--                      specifies whether Rapid Start is enabled on this SDP Bind.
--                      When the value is 'enabled' the Spanning Tree Protocol
--                      state transitions on this SDP Bind are driven by the value
--                      of the 'HelloTime', instead of the value of 'ForwardDelay',
--                      thus allowing a faster transition into the forwarding
--                      state."
--     DEFVAL          { disabled }
--     ::= { sdpBindTlsEntry 5 }
--
-- sdpBindTlsStpBpduEncap OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         dynamic (1),
--                         dot1d   (2),
--                         pvst    (3)
--                     }
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpBpduEncap
--                      specifies the type of encapsulation used on BPDUs sent out
--                      and received on this SDP Bind."
--     DEFVAL          { dynamic }
--     ::= { sdpBindTlsEntry 6 }
--
-- sdpBindTlsStpPortState OBJECT-TYPE
--     SYNTAX          TStpPortState
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpPortState indicates
--                      the port's current state as defined by application of the
--                      Spanning Tree Protocol. This state controls what action a
--                      port takes on reception of a frame. If the bridge has
--                      detected a port that is malfunctioning it will
--                      place that port into the 'broken' state. All possible
--                      states are: learning, forwarding, broken, and discarding."
--     ::= { sdpBindTlsEntry 7 }
--
-- sdpBindTlsStpDesignatedBridge OBJECT-TYPE
--     SYNTAX          BridgeId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpDesignatedBridge
--                      indicates the Bridge Identifier of the bridge which this
--                      port considers to be the Designated Bridge for this port's
--                      segment."
--     ::= { sdpBindTlsEntry 8 }
--
-- sdpBindTlsStpDesignatedPort OBJECT-TYPE
--     SYNTAX          Integer32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpDesignatedPort
--                      indicates the Port Identifier of the port on the
--                      Designated Bridge for this port's segment."
--     ::= { sdpBindTlsEntry 9 }
--
-- sdpBindTlsStpForwardTransitions OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpForwardTransitions
--                      indicates the number of times this port has transitioned
--                      from the Learning state to the Forwarding state."
--     ::= { sdpBindTlsEntry 10 }
--
-- sdpBindTlsStpInConfigBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpInConfigBpdus
--                      indicates the number of Configuration BPDUs received on
--                      this SDP Bind."
--     ::= { sdpBindTlsEntry 11 }
--
-- sdpBindTlsStpInTcnBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpInTcnBpdus
--                      indicates the number of Topology
--                      Change Notification BPDUs received on this SDP Bind."
--     ::= { sdpBindTlsEntry 12 }
--
-- sdpBindTlsStpInBadBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpInBadBpdus indicates
--                      the number of bad BPDUs received on this SDP Bind."
--     ::= { sdpBindTlsEntry 13 }
--
-- sdpBindTlsStpOutConfigBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOutConfigBpdus
--                      indicates the number of Configuration BPDUs sent out this
--                      SDP Bind."
--     ::= { sdpBindTlsEntry 14 }
--
-- sdpBindTlsStpOutTcnBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOutTcnBpdus
--                      indicates the number of Topology Change Notification BPDUs
--                      sent out this SDP Bind."
--     ::= { sdpBindTlsEntry 15 }
--
-- sdpBindTlsStpOperBpduEncap OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         dot1d (2),
--                         pvst  (3)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOperBpduEncap
--                      indicates the operating encapsulation type used on BPDUs
--                      sent out and received on this SDP Bind."
--     ::= { sdpBindTlsEntry 16 }
--
-- sdpBindTlsStpVpnId OBJECT-TYPE
--     SYNTAX          VpnId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpVpnId indicates the
--                       VPN ID of the associated service."
--     ::= { sdpBindTlsEntry 17 }
--
-- sdpBindTlsStpCustId OBJECT-TYPE
--     SYNTAX          TmnxCustId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpCustId indicates the
--                      Customer ID of the associated service."
--     ::= { sdpBindTlsEntry 18 }
--
   sdpBindTlsMacAddressLimit OBJECT-TYPE
       SYNTAX          Integer32(0..511999)
       MAX-ACCESS      read-write
       STATUS          current
       DESCRIPTION     "The value of the object sdpBindTlsMacAddressLimit
                        specifies the maximum number of learned and static entries
                        allowed in the FDB for this  SDP  Bind.  The value 0
                        means: no limit for this SDP Bind. The command is valid
                        only for spoke SDPs.

                        The maximum value of sdpBindTlsMacAddressLimit is '511999',
                        when the the value of
                        TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'd'.

                        The maximum value of sdpBindTlsMacAddressLimit is '196607',
                        when the the value of
                        TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c'.

                        In other cases, the maximum value of
                        sdpBindTlsMacAddressLimit is '131071'."
       DEFVAL          { 0 }
       ::= { sdpBindTlsEntry 19 }

 sdpBindTlsNumMacAddresses OBJECT-TYPE
     SYNTAX          Integer32
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of the object sdpBindTlsNumMacAddresses
                      indicates the number of MAC addresses  currently present
                      in the FDB that belong to this  SDP  Bind (Both learned
                      and static MAC addresses are counted)."
     ::= { sdpBindTlsEntry 20 }

 sdpBindTlsNumStaticMacAddresses OBJECT-TYPE
     SYNTAX          Integer32
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of the object sdpBindTlsNumStaticMacAddresses
                      indicates the number of static MAC addresses currently
                      present in the FDB that belong to this SDP Bind."
     ::= { sdpBindTlsEntry 21 }

 sdpBindTlsMacLearning OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-write
     STATUS          current
     DESCRIPTION     "The value of the object sdpBindTlsMacLearning specifies
                      whether the MAC learning process is enabled for this SDP
                      Bind. The value is ignored if MAC learning is disabled on
                      service level."
     DEFVAL          { enabled }
     ::= { sdpBindTlsEntry 22 }

 sdpBindTlsMacAgeing OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-write
     STATUS          current
     DESCRIPTION     "The value of the object sdpBindTlsMacAgeing specifies
                      whether the MAC aging process  is  enabled  for  this
                      SDP Bind. the value is ignored if MAC aging is disabled
                      on service level."
     DEFVAL          { enabled }
     ::= { sdpBindTlsEntry 23 }

-- sdpBindTlsStpOperEdge OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOperEdge indicates
--                      the operational value of the Edge Port parameter.
--                      The object is initialized to the value of
--                      sdpBindTlsStpRapidStart and is set FALSE on reception of a
--                      BPDU."
--     REFERENCE
--                     "IEEE 802.1t clause 14.8.2, 18.3.4"
--     ::= { sdpBindTlsEntry 24 }
--
-- sdpBindTlsStpAdminPointToPoint OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         forceTrue  (0),
--                         forceFalse (1)
--                     }
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object xx sdpBindTlsStpAdminPointToPoint
--                      specifies the administrative   point-to-point   status  of
--                      the  LAN segment  attached to this sdp.
--                      A value of 'forceTrue' indicates  that  this port should
--                      always be treated as if it is connected to a
--                      point-to-point link.
--                      A value of 'forceFalse' indicates that this port should
--                      be treated as having a shared media connection."
--     REFERENCE
--                     "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
--     DEFVAL          { forceTrue }
--     ::= { sdpBindTlsEntry 25 }
--
-- sdpBindTlsStpPortRole OBJECT-TYPE
--     SYNTAX          StpPortRole
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpPortRole indicates
--                      the current role of the sdp as defined by the Rapid
--                      Spanning Tree Protocol."
--     ::= { sdpBindTlsEntry 26 }
--
-- sdpBindTlsStpAutoEdge OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpAutoEdge specifies
--                      whether this SDP is enabled for auto-edge detection as
--                      defined by Rapid Spanning Tree Protocol."
--     DEFVAL          { enabled }
--     ::= { sdpBindTlsEntry 27 }
--
-- sdpBindTlsStpOperProtocol OBJECT-TYPE
--     SYNTAX          StpProtocol
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOperProtocol
--                      indicates whether stp, rstp or mstp is running on this
--                      spoke sdp. If the protocol is not enabled on this
--                      spoke-sdp the value notApplicable is returned."
--     ::= { sdpBindTlsEntry 28 }
--
-- sdpBindTlsStpInRstBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpInRstBpdus indicates
--                      the number of Rapid Spanning Tree (Rst) BPDUs received on
--                      this SDP."
--     ::= { sdpBindTlsEntry 29 }
--
-- sdpBindTlsStpOutRstBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOutRstBpdus indicates
--                      the number of Rapid Spanning Tree (Rstp) BPDUs sent out on
--                      this SDP."
--     ::= { sdpBindTlsEntry 30 }
--
 sdpBindTlsLimitMacMove OBJECT-TYPE
     SYNTAX          TlsLimitMacMove
     MAX-ACCESS      read-write
     STATUS          current
     DESCRIPTION     "When sdpBindTlsLimitMacMove value is set to  blockable
                      (1) the agent will monitor the MAC relearn rate on this
                      SDP  Bind,  and it will block it when the re-learn rate
                      specified by svcTlsMacMoveMaxRate is exceeded. When the
                      value  is  'nonBlockable' this SDP binding will not be
                      blocked,  and  another  blockable  SDP  binding will be
                      blocked instead."
     DEFVAL          { blockable }
     ::= { sdpBindTlsEntry 31 }

 sdpBindTlsDiscardUnknownSource OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-write
     STATUS          current
     DESCRIPTION     "With the object sdpBindTlsMacAddressLimit a limit  can
                      be configured for the max number of MAC addresses that
                      will  be  learned  on  this  SDP  Bind (only for spoke
                      SDPs).  When  this  limit  is  reached,  packets  with
                      unknown  source  MAC address are forwarded by default.
                      By  setting sdpBindTlsDiscardUnknownSource to enabled,
                      packets  with  unknown  source  MAC will be dropped in
                      stead."
     DEFVAL          { disabled }
     ::= { sdpBindTlsEntry 32 }

-- sdpBindTlsMvplsPruneState OBJECT-TYPE
--     SYNTAX          MvplsPruneState
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsMvplsPruneState
--                      indicates the mVPLS prune state of the spoke SDP. The
--                      object will be set to notApplicable if the spoke SDP is
--                      not managed by a mVPLS. If the SDP is managed the state
--                      reflects whether or not it is pruned by the STP instance
--                      running in the mVPLS instance."
--     ::= { sdpBindTlsEntry 33 }
--
-- sdpBindTlsMvplsMgmtService OBJECT-TYPE
--     SYNTAX          TmnxServId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsMvplsMgmtService
--                      indicates the service Id of the service where the STP
--                      instance is running that is managing this spoke SDP. This
--                      object is only valid if sdpBindTlsMvplsPruneState is
--                      different from notApplicable."
--     ::= { sdpBindTlsEntry 34 }
--
-- sdpBindTlsMvplsMgmtSdpBndId OBJECT-TYPE
--     SYNTAX          SdpBindId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsMvplsMgmtSdpBndId
--                      indicates the SDP bind id in the mVPLS instance specified
--                      in sdpBindTlsMvplsMgmtService that is controlling this
--                      SDP. This object is only valid if
--                      sdpBindTlsMvplsPruneState is different from
--                      notApplicable."
--     ::= { sdpBindTlsEntry 35 }
--
-- sdpBindTlsStpException OBJECT-TYPE
--     SYNTAX          StpExceptionCondition
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpException indicates
--                      whether an STP exception condition is present on this
--                      Spoke Sdp.
--                      - none : no exception condition found.
--                      - oneWayCommuniation : The neighbor RSTP peer on this link
--                                             is not able to detect our presence.
--                      - downstreamLoopDetected :A loop is detected on this link."
--     ::= { sdpBindTlsEntry 36 }
--
 sdpBindTlsL2ptTermination OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-write
     STATUS          current
     DESCRIPTION     "The value of the object sdpBindTlsL2ptTermination
                      specifies whether received L2 Protocol Tunnel pdu's are
                      terminated on this port or sdp"
     DEFVAL          { disabled }
     ::= { sdpBindTlsEntry 37 }
--
-- sdpBindTlsBpduTranslation OBJECT-TYPE
--     SYNTAX          TlsBpduTranslation
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsBpduTranslation
--                      specifies whether received L2 Protocol Tunnel pdu's are
--                      translated before being sent out on this port or sap"
--     DEFVAL          { disabled }
--     ::= { sdpBindTlsEntry 38 }
--
-- sdpBindTlsStpRootGuard OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpRootGuard specifies
--                      whether this port is allowed to become STP root port.
--                      It corresponds to the parameter 'restrictedRole' in 802.1Q.
--                      If set, it can cause lack of spanning tree connectivity."
--     DEFVAL { false }
--     ::= { sdpBindTlsEntry 39 }
--
-- sdpBindTlsStpInMstBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpInMstBpdus indicates
--                      the number of Multiple Spanning Tree (Mst) BPDUs received
--                      on this SDP."
--     ::= { sdpBindTlsEntry 40 }
--
-- sdpBindTlsStpOutMstBpdus OBJECT-TYPE
--     SYNTAX          Gauge32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpOutMstBpdus indicates
--                      the number of Multiple Spanning Tree (Mst) BPDUs sent out
--                      on this SDP."
--     ::= { sdpBindTlsEntry 41 }
--
-- sdpBindTlsStpRxdDesigBridge OBJECT-TYPE
--     SYNTAX          BridgeId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsStpRxdDesigBridge
--                      indicates  the designated Bridge Identifier in the last
--                      BPDU which was received on this SDP."
--     ::= { sdpBindTlsEntry 42 }
--
-- sdpBindTlsMacMoveNextUpTime OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "seconds"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsMacMoveNextUpTime
--                      counts down the time in seconds until a SDP bind that
--                      has been brought down due to exceeding the TLS
--                      svcTlsMacMoveMaxRate, sdpBindOperFlags
--                      'relearnLimitExceeded', is automatically brought up again.
--
--                      When this value is 0xffff, the SDP bind will never be
--                      automatically brought up.
--
--                      When sdpBindOperStatus is 'up', this object counts down the
--                      time in seconds until the value of
--                      sdpBindTlsMacMoveRateExcdLeft is reset."
--     ::= { sdpBindTlsEntry 43 }
--
-- sdpBindTlsMacMoveRateExcdLeft   OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sapTlsMacMoveRateExcdLeft
--                      counts down the number of times this SDP bind can exceed
--                      the TLS svcTlsMacMoveMaxRate and still be automatically
--                      brought up."
--     ::= { sdpBindTlsEntry 44 }
--
-- sdpBindTlsLimitMacMoveLevel   OBJECT-TYPE
--     SYNTAX          TlsLimitMacMoveLevel
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsLimitMacMoveLevel
--                      specifies the hierarchy in which spoke-SDPs are
--                      blocked when a MAC-move limit is exceeded. When a MAC is
--                      moving among multiple SAPs or spoke-SDPs, the SAP bind
--                      or spoke-SDP bind with the lower level is blocked first.
--                      (tertiary is the lowest)"
--     DEFVAL { tertiary }
--     ::= { sdpBindTlsEntry 45 }
--
-- sdpBindTlsBpduTransOper OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         undefined (1),
--                         disabled  (2),
--                         pvst      (3),
--                         stp       (4),
--                         pvst-rw   (5)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsBpduTransOper indicates
--                      the operational BPDU encapsulation used for BPDU
--                      translated frames."
--     ::= { sdpBindTlsEntry 46 }
--
-- sdpBindTlsL2ptProtocols OBJECT-TYPE
--     SYNTAX          L2ptProtocols
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsL2ptProtocols
--                      specifies which L2 Protocol Tunnel pdu's are
--                      terminated on this port or sdp"
--     DEFVAL          { { stp }  }
--     ::= { sdpBindTlsEntry 47 }
--
 sdpBindTlsIgnoreStandbySig     OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION     "The value of sdpBindTlsIgnoreStandbySig specifies whether
                      the local internal tasks will take into account the
                      'pseudo-wire forwarding standby' bit received from the LDP
                      peer which is normally ignored.

                      When set to 'true', this bit is not considered in the
                      internal tasks.

                      A similar object svcEndPointIgnoreStandbySig is present at
                      the endpoint level.  If this spoke-SDP is part of that
                      explicit endpoint, this object will be set to the value of
                      svcEndPointIgnoreStandbySig and its value will not allowed
                      to be changed.

                      This spoke-SDP can be made part of an explicit-endpoint
                      only if the setting of this object is not conflicting with
                      the setting of svcEndPointIgnoreStandbySig object."
     DEFVAL      { false }
     ::= { sdpBindTlsEntry 48 }

 sdpBindTlsBlockOnMeshFail     OBJECT-TYPE
     SYNTAX      TruthValue
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION     "The value of sdpBindTlsBlockOnMeshFail specifies that the
                      operational status of this spoke SDP will consider
                      operational status of associated mesh SDPs in this service.

                      If there are no mesh SDPs in the service, value of this
                      object is ignored.

                      When this object is set to 'true', then the operational
                      status of this spoke SDP will be 'down' until the
                      operational status of atleast one mesh SDP in this service
                      is 'up'.

                      When set to 'false', the operational status of this spoke
                      SDP does not consider the operational status of any mesh
                      SDPs in the service."
     DEFVAL      { false }
     ::= { sdpBindTlsEntry 49 }

-- sdpBindTlsInTcBitBpdus OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsInTcBitBpdus
--                      indicates the number BPDUs received on this SDP Bind
--                      with the Topology Change bit set."
--     ::= { sdpBindTlsEntry 50 }
--
-- sdpBindTlsOutTcBitBpdus OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsOutTcBitBpdus
--                      indicates the number BPDUs sent out this SDP Bind
--                      with the Topology Change bit set."
--     ::= { sdpBindTlsEntry 51 }
--
-- sdpBindTlsRestProtSrcMac OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsRestProtSrcMac specifies
--                      how the agent will handle relearn requests for protected
--                      MAC addresses. When the value of this object is 'true'
--                      requests to relearn a protected MAC address will be
--                      ignored.
--
--                      In addition, if the value of sdpBindTlsRestProtSrcMacAction
--                      is 'disable', then the SDP-BIND where the protected source
--                      MAC was seen will be brought operationally down."
--     DEFVAL          { false }
--     ::= { sdpBindTlsEntry 52 }
--
-- sdpBindTlsRestProtSrcMacAction OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         disable      (1),
--                         alarmOnly    (2),
--                         discardFrame (3)
--                     }
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindTlsRestProtSrcMacAction
--                      indicates the action to take whenever a relearn request
--                      for a protected MAC is received on a restricted SAP.
--
--                      When the value of this object is 'disable' the SAP
--                      will be placed in the operational down state, with the
--                      operating flag 'recProtSrcMac' set.
--
--                      When the value of this object is 'alarmOnly', the SDP-BIND
--                      will be left up and only a notification,
--                      sdpBindReceivedProtSrcMac,  will be generated.
--
--                      When the value of this object is 'discardFrame', the
--                      SDP-BIND will start discarding the frame in addition to
--                      generating sdpBindReceivedProtSrcMac notification."
--     DEFVAL          { disable }
--     ::= { sdpBindTlsEntry 53 }
--
-- sdpBindTlsAutoLearnMacProtect   OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-write
--     STATUS      current
--     DESCRIPTION    "The value of sdpBindTlsAutoLearnMacProtect specifies whether
--                     to enable automatic population of the MAC protect list with
--                     source MAC addresses learned on the associated SDP binding."
--     DEFVAL { false }
--     ::= { sdpBindTlsEntry 54 }


-- ------------------------------------------
-- TLS Mesh SDP Bind Table
-- ------------------------------------------
-- sdpBindMeshTlsTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindMeshTlsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "A table that contains TLS Mesh SDP Bind
--                      information."
--     ::= { tnSdpObjs 7 }
--
-- sdpBindMeshTlsEntry OBJECT-TYPE
--     SYNTAX          SdpBindMeshTlsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "TLS specific information about an Mesh SDP Bind."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindMeshTlsTable 1 }
--
-- SdpBindMeshTlsEntry ::=
--     SEQUENCE {
--         sdpBindMeshTlsPortState         TStpPortState,
--         sdpBindMeshTlsHoldDownTimer     INTEGER,
--         sdpBindMeshTlsTransitionState   INTEGER,
--         sdpBindMeshTlsNotInMstRegion    TruthValue,
--         sdpBindMeshTlsRestProtSrcMac    TruthValue,
--         sdpBindMeshTlsRestProtSrcMacAct INTEGER,
--         sdpBindMeshTlsAutoLearnMacProt  TruthValue
--     }
--
-- sdpBindMeshTlsPortState OBJECT-TYPE
--     SYNTAX          TStpPortState
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the actual state of the Mesh SDP. If
--                      the sdp is operationally down, the port will be in the
--                      'disabled' state. If the sdp is operationally up, the
--                      state will be 'forwarding' unless the hold-down timer is
--                      active in which case the state will be 'discarding'."
--     ::= { sdpBindMeshTlsEntry 1 }
--
-- sdpBindMeshTlsHoldDownTimer OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         not-active (1),
--                         active     (2)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "When the hold-down timer is active, all traffic coming
--                      from this mesh sdp will be blocked. This timer will be
--                      activated for any of the following cases:
--                      1. when a mesh SDP becomes operational;
--                      2. when a 'disputed' BPDU is received over this mesh sdp;
--                         This is typically a symptom of one way communication
--                         (the peer at the other side of the mesh sdp does not
--                         receive our BPDUs).
--                      3. when a MSTP BPDU from outside the region is received
--                         over this mesh SDP."
--     ::= { sdpBindMeshTlsEntry 2 }
--
-- sdpBindMeshTlsTransitionState OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         not-applicable        (1),
--                         waiting-for-agreement (2),
--                         agreement-received    (3)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates whether we already received an
--                      agreement from the peer connected via this mesh sdp. RSTP
--                      expects an agreement from every peer after sending a
--                      proposal over the VCP when it wants to transition the latter
--                      to the forwarding state. This object is only relevant when
--                      the role of the VCP is 'designated'. Not receiving an
--                      agreement is typically caused by an improperly configured
--                      sdp or by a non rstp enabled peer."
--     ::= { sdpBindMeshTlsEntry 3 }
--
-- sdpBindMeshTlsNotInMstRegion OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object sdpBindMeshTlsNotInMstRegion indicates whether
--                      we received a BPDU from another MST-region on this mesh
--                      SDP.
--
--                      If set to 'true' then the object sdpBindMeshTlsHoldDownTimer
--                      will have the value 'active'.
--
--                      It is up to the operator to make sure bridges connected
--                      via mesh SDPs are in the same MST-region. If not the mesh
--                      will NOT become operational."
--     ::= { sdpBindMeshTlsEntry 4 }
--
-- sdpBindMeshTlsRestProtSrcMac OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindMeshTlsRestProtSrcMac
--                      specifies how the agent will handle relearn requests for
--                      protected MAC addresses. When the value of this object is
--                      'true' requests to relearn a protected MAC address will be
--                      ignored.
--
--                      In addition, if the value of
--                      sdpBindMeshTlsRestProtSrcMacAct is 'disable', then the
--                      SDP-BIND where the protected source MAC was seen will be
--                      brought operationally down."
--     DEFVAL          { false }
--     ::= { sdpBindMeshTlsEntry 5 }
--
-- sdpBindMeshTlsRestProtSrcMacAct OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         disable      (1),
--                         alarmOnly    (2),
--                         discardFrame (3)
--                     }
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindMeshTlsRestProtSrcMacAct
--                      indicates the action to take whenever a relearn request
--                      for a protected MAC is received on a restricted SAP.
--
--                      When the value of this object is 'disable' the SAP
--                      will be placed in the operational down state, with the
--                      operating flag 'recProtSrcMac' set.
--
--                      When the value of this object is 'alarmOnly', the SDP-BIND
--                      will be left up and only a notification,
--                      sdpBindReceivedProtSrcMac,  will be generated.
--
--                      When the value of this object is 'discardFrame', the
--                      SDP-BIND will start discarding the frame in addition to
--                      generating sdpBindReceivedProtSrcMac notification."
--     DEFVAL          { disable }
--     ::= { sdpBindMeshTlsEntry 6 }
--
-- sdpBindMeshTlsAutoLearnMacProt   OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-write
--     STATUS      current
--     DESCRIPTION    "The value of sdpBindMeshTlsAutoLearnMacProt specifies
--                     whether to enable automatic population of the MAC protect
--                     list with source MAC addresses learned on the associated
--                     SDP binding."
--     DEFVAL { false }
--     ::= { sdpBindMeshTlsEntry 7 }


-- ------------------------------------
-- APIPE SDP Bind Table
-- ------------------------------------
-- sdpBindApipeTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindApipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindApipeTable has an entry for each apipe sdpBind
--                      configured on this system."
--     ::= { tnSdpObjs 8 }
--
-- sdpBindApipeEntry OBJECT-TYPE
--     SYNTAX          SdpBindApipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry represents a particular sdpBind related to a
--                      particular Apipe service entry. Entries are created/deleted
--                      by the user."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindApipeTable 1 }
--
-- SdpBindApipeEntry ::=
--     SEQUENCE {
--         sdpBindApipeAdminConcatCellCount        Integer32,
--         sdpBindApipeSigConcatCellCount          Integer32,
--         sdpBindApipeOperConcatCellCount         Integer32,
--         sdpBindApipeConcatMaxDelay              Integer32,
--         sdpBindApipeConcatCellClp               TruthValue,
--         sdpBindApipeConcatCellAal5Fr            TruthValue
--     }
--
-- sdpBindApipeAdminConcatCellCount OBJECT-TYPE
--     SYNTAX          Integer32 (1..128)
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeAdminConcatCellCount specifies
--                      the maximum number of ATM cells to accumulate
--                      into an MPLS packet.  The remote peer will also signal the
--                      maximum number of concatenated cells it is willing to
--                      accept in an MPLS packet.  When the lesser of (the
--                      configured value and the signaled value) number of cells
--                      is reached, the MPLS packet is queued for transmission
--                      onto the pseudowire."
--     DEFVAL { 1 }
--     ::= { sdpBindApipeEntry 1 }
--
-- sdpBindApipeSigConcatCellCount OBJECT-TYPE
--     SYNTAX          Integer32 (0..128)
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeSigConcatCellCount indicates the
--                      maximum number of concatenated ATM cells the remote peer
--                      is willing to accept.  If there is no remote peer, or if
--                      the label mapping has not been received, this object will
--                      be zero (0)."
--     ::= { sdpBindApipeEntry 2 }
--
-- sdpBindApipeOperConcatCellCount OBJECT-TYPE
--     SYNTAX          Integer32 (1..128)
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeOperConcatCellCount indicates the
--                      maximum number of concatenated ATM cells that will be sent
--                      on this SDP binding."
--     ::= { sdpBindApipeEntry 3 }
--
-- sdpBindApipeConcatMaxDelay OBJECT-TYPE
--     SYNTAX          Integer32 (1..400)
--     UNITS           "hundreds of microseconds"
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeConcatMaxDelay object specifies
--                      the maximum amount of time to wait while
--                      performing ATM cell concatenation into an MPLS packet
--                      before transmitting the MPLS packet.  This places an upper
--                      bound on the amount of delay introduced by the
--                      concatenation process.
--                      When this amount of time is reached from when the first
--                      ATM cell for this MPLS packet was received, the MPLS
--                      packet is queued for transmission onto the pseudowire."
--     DEFVAL { 400 }
--     ::= { sdpBindApipeEntry 4 }
--
-- sdpBindApipeConcatCellClp OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeConcatCellClp specifies whether
--                      a CLP change should be used as an indication to complete
--                      the cell concatenation operation. When the value is 'true',
--                      CLP is used to indicate that cell concatenation should
--                      be completed."
--     DEFVAL { false }
--     ::= { sdpBindApipeEntry 5 }
--
-- sdpBindApipeConcatCellAal5Fr OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindApipeConcatCellAal5Fr specifies
--                      whether the AAL5 EOP (end of packet) should be used as an
--                      indication to complete the cell concatenation operation.
--                      When the value is 'true', EOP is used to indicate that
--                      cell concatenation should be completed."
--     DEFVAL { false }
--     ::= { sdpBindApipeEntry 6 }

-- ------------------------------------
-- SDP Bind DHCP Information Table
-- ------------------------------------
-- sdpBindDhcpInfoTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindDhcpInfoEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "A table that contains DHCP information related to a
--                      SDP Bind.
--
--                      A row will exist in this table for each spoke or
--                      mesh SDP in a  Tls Service. Rows are created and deleted
--                      automatically by the system."
--     ::= { tnSdpObjs 9 }
--
-- sdpBindDhcpInfoEntry OBJECT-TYPE
--     SYNTAX          SdpBindDhcpInfoEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "DHCP specific information about an SDP Bind."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindDhcpInfoTable 1 }
--
-- SdpBindDhcpInfoEntry ::=
--     SEQUENCE {
--         sdpBindDhcpDescription  ServObjDesc,
--         sdpBindDhcpSnoop        TmnxEnabledDisabled
--     }
--
-- sdpBindDhcpDescription OBJECT-TYPE
--     SYNTAX          ServObjDesc
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpDescription specifies
--                      a user provided description for DHCP on this Sdp Bind."
--     DEFVAL          { ''H }
--     ::= { sdpBindDhcpInfoEntry 1 }
--
-- sdpBindDhcpSnoop OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpSnoop specifies
--                      whether or not DHCP snooping is enabled on the Sdp Bind."
--     DEFVAL          { disabled }
--     ::= { sdpBindDhcpInfoEntry 2 }

-- ------------------------------------
-- SDP Bind DHCP Stats Table
-- ------------------------------------
-- sdpBindDhcpStatsTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindDhcpStatsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "sdpBindDhcpStatsTable contains DHCP statistics related
--                      to  a TLS SDP Bind. A row will exist in this table for
--                      each  spoke  or  mesh  SDP  in a Tls Service. Rows are
--                      created and deleted automatically by the system."
--     ::= { tnSdpObjs 10 }
--
-- sdpBindDhcpStatsEntry OBJECT-TYPE
--     SYNTAX          SdpBindDhcpStatsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "DHCP statistics for a TLS spoke SDP or mesh SDP."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindDhcpStatsTable 1 }
--
-- SdpBindDhcpStatsEntry ::=
--     SEQUENCE {
--         sdpBindDhcpStatsClntSnoopdPckts    Counter32,
--         sdpBindDhcpStatsSrvrSnoopdPckts    Counter32,
--         sdpBindDhcpStatsClntForwdPckts     Counter32,
--         sdpBindDhcpStatsSrvrForwdPckts     Counter32,
--         sdpBindDhcpStatsClntDropdPckts     Counter32,
--         sdpBindDhcpStatsSrvrDropdPckts     Counter32,
--         sdpBindDhcpStatsClntProxRadPckts   Counter32,
--         sdpBindDhcpStatsClntProxLSPckts    Counter32,
--         sdpBindDhcpStatsGenReleasePckts    Counter32,
--         sdpBindDhcpStatsGenForceRenPckts   Counter32
--     }
--
-- sdpBindDhcpStatsClntSnoopdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsClntSnoopdPckts
--                      indicates the number of  DHCP client packets that have
--                      been snooped on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 1 }
--
-- sdpBindDhcpStatsSrvrSnoopdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsSrvrSnoopdPckts
--                      indicates the number of  DHCP server packets that have
--                      been snooped on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 2 }
--
-- sdpBindDhcpStatsClntForwdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsClntForwdPckts
--                      indicates the number of  DHCP  client  packets  that have
--                      been forwarded on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 3 }
--
-- sdpBindDhcpStatsSrvrForwdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsSrvrForwdPckts
--                      indicates the number of  DHCP  server  packets  that have
--                      been forwarded on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 4 }
--
-- sdpBindDhcpStatsClntDropdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsClntDropdPckts
--                      indicates the number of  DHCP client packets that have
--                      been dropped on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 5 }
--
-- sdpBindDhcpStatsSrvrDropdPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsSrvrDropdPckts
--                      indicates the number of  DHCP server packets that have
--                      been dropped on this SDP bind."
--     ::= { sdpBindDhcpStatsEntry 6 }
--
-- sdpBindDhcpStatsClntProxRadPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsClntProxRadPckts
--                      indicates the number of DHCP client packets that have
--                      been proxied on this SDP bind based on data received from
--                      a RADIUS server."
--     ::= { sdpBindDhcpStatsEntry 7 }
--
-- sdpBindDhcpStatsClntProxLSPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsClntProxLSPckts
--                      indicates the number of DHCP client packets that have
--                      been proxied on this SDP bind based on a lease state. The
--                      lease itself can have been obtained from a DHCP or RADIUS
--                      server. This is the so called lease split functionality."
--     ::= { sdpBindDhcpStatsEntry 8 }
--
-- sdpBindDhcpStatsGenReleasePckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsGenReleasePckts
--                      indicates the number of DHCP RELEASE messages spoofed on
--                      this SDP bind to the DHCP server."
--     ::= { sdpBindDhcpStatsEntry 9 }
--
-- sdpBindDhcpStatsGenForceRenPckts OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindDhcpStatsGenForceRenPckts
--                      indicates the number of DHCP FORCERENEW messages spoofed
--                      on this SDP bind to the DHCP clients."
--     ::= { sdpBindDhcpStatsEntry 10 }

-- ------------------------------------
-- IPIPE SDP Bind Table
-- ------------------------------------
-- sdpBindIpipeTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindIpipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindIpipeTable has an entry for each IPIPE sdpBind
--                      configured on this system."
--     ::= { tnSdpObjs 11 }
--
-- sdpBindIpipeEntry OBJECT-TYPE
--     SYNTAX          SdpBindIpipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry represents a particular sdpBind related to a
--                      particular IPIPE service entry. Entries are created/deleted
--                      by the user."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindIpipeTable 1 }
--
-- SdpBindIpipeEntry ::=
--     SEQUENCE {
--         sdpBindIpipeCeInetAddressType               InetAddressType,
--         sdpBindIpipeCeInetAddress                   InetAddress,
--         sdpBindIpipePeerCeInetAddrType              InetAddressType,
--         sdpBindIpipePeerCeInetAddr                  InetAddress,
--         sdpBindIpipePeerIpv6Capability              TruthValue,
--         sdpBindIpipePeerLLCeInetAddr                InetAddress,
--         sdpBindIpipePeerGlobalCeInetAddr            InetAddress
--
--     }
--
-- sdpBindIpipeCeInetAddressType OBJECT-TYPE
--     SYNTAX          InetAddressType
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindIpipeCeInetAddressType
--                      specifies the address type of the IP address of the CE
--                      device reachable throught this IPIPE SDP binding.
--
--                      This object is only configurable if the value of
--                      'svcIpipeCeAddressDiscovery' is 'disabled."
--     ::= { sdpBindIpipeEntry 1 }
--
-- sdpBindIpipeCeInetAddress OBJECT-TYPE
--     SYNTAX          InetAddress (SIZE(0|4))
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The type of this address is determined by the value of
--                      the sdpBindIpipeCeInetAddressType object.
--
--                      This object specifies the IPv4 address of the
--                      CE device reachable through this SDP binding.
--
--                      This object is only configurable if the value of
--                      'svcIpipeCeAddressDiscovery' is 'disabled."
--     ::= { sdpBindIpipeEntry 2 }
--
-- sdpBindIpipePeerCeInetAddrType OBJECT-TYPE
--     SYNTAX          InetAddressType
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "If the value of 'svcIpipeCeAddressDiscovery' is enabled,
--                      the value of the object sdpBindIpipeCeInetAddressType
--                      indicates the address type of the IP address of the CE
--                      device that is learnt via LDP on this IPIPE SDP binding."
--     ::= { sdpBindIpipeEntry 3 }
--
-- sdpBindIpipePeerCeInetAddr OBJECT-TYPE
--     SYNTAX          InetAddress (SIZE(0|4))
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "If the value of 'svcIpipeCeAddressDiscovery' is enabled,
--                      the type of this address is determined by the value of
--                      the sdpBindIpipeCeInetAddressType object.
--
--                      This object indicates the IPv4 address of the
--                      CE device that is learnt via LDP on this SDP binding."
--     ::= { sdpBindIpipeEntry 4 }
--
-- sdpBindIpipePeerIpv6Capability OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindIpipePeerIpv6Capability indicates
--                      whether the far end sent us the IPv6 Stack capability
--                      TLV."
--     ::= { sdpBindIpipeEntry 5 }
--
-- sdpBindIpipePeerLLCeInetAddr OBJECT-TYPE
--     SYNTAX          InetAddress (SIZE(0|16))
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "If the value of svcIpipeIpv6CeAddressDiscovery is
--                      'enabled (1)', this object indicates the discovered link
--                      local IPv6 address of the far end CE device that is learnt
--                      via NS/NA messages received on this SDP binding."
--     ::= { sdpBindIpipeEntry 6 }
--
-- sdpBindIpipePeerGlobalCeInetAddr OBJECT-TYPE
--     SYNTAX          InetAddress (SIZE(0|16))
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "If the value of svcIpipeIpv6CeAddressDiscovery is
--                      'enabled (1)', this object indicates the discovered global
--                      IPv6 address of the far end CE device that is learnt via
--                      NS/NA messages received on this SDP binding."
--     ::= { sdpBindIpipeEntry 7 }


-- --------------------------------------------
-- SDP Egress forwarding-class mapping table
-- --------------------------------------------
sdpFCMappingTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpFCMappingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "The sdpFCMappingTable has an entry for each FC mapping
                     on an SDP configured on this system."
    ::= { tnSdpObjs 12 }

sdpFCMappingEntry OBJECT-TYPE
    SYNTAX          SdpFCMappingEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "Each row entry represents a particular FC to LSP ID
                     mapping on an SDP. Entries are created/deleted by
                     the user."
    INDEX           { tnSysSwitchId, sdpId, sdpFCMappingFCName }
    ::= { sdpFCMappingTable 1 }

SdpFCMappingEntry ::=
    SEQUENCE {
        sdpFCMappingFCName               TNamedItem,
        sdpFCMappingRowStatus            RowStatus,
        sdpFCMappingLspId                TmnxVRtrMplsLspID
    }

sdpFCMappingFCName OBJECT-TYPE
    SYNTAX          TNamedItem
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION     "The value of sdpFCMappingFCName specifies the forwarding
                     class for which this mapping is defined, in the SDP
                     indexed by 'sdpId'."
    ::= { sdpFCMappingEntry 1 }

sdpFCMappingRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpFCMappingRowStatus is used for the
                     creation and deletion of forwarding class to LSP
                     mappings."
    ::= { sdpFCMappingEntry 2 }


sdpFCMappingLspId OBJECT-TYPE
    SYNTAX          TmnxVRtrMplsLspID
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION     "The value of sdpFCMappingLspId specifies the LSP ID that
                     traffic corresponding to the class specified in
                     sdpFCMappingFCName will be forwarded on. This object MUST
                     be specified at row creation time."
    ::= { sdpFCMappingEntry 3 }

-- ------------------------------------
-- CPIPE SDP Bind Table
-- ------------------------------------
-- sdpBindCpipeTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindCpipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindCpipeTable has an entry for each cpipe sdpBind
--                      configured on this system."
--     ::= { tnSdpObjs 15 }
--
-- sdpBindCpipeEntry OBJECT-TYPE
--     SYNTAX          SdpBindCpipeEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry represents a particular sdpBind related to a
--                      particular Cpipe service entry. Entries are created/deleted
--                      by the user."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindCpipeTable 1 }
--
-- SdpBindCpipeEntry ::=
--     SEQUENCE {
--         sdpBindCpipeLocalPayloadSize        Unsigned32,
--         sdpBindCpipePeerPayloadSize         Unsigned32,
--         sdpBindCpipeLocalBitrate            Unsigned32,
--         sdpBindCpipePeerBitrate             Unsigned32,
--         sdpBindCpipeLocalSigPkts            TdmOptionsSigPkts,
--         sdpBindCpipePeerSigPkts             TdmOptionsSigPkts,
--         sdpBindCpipeLocalCasTrunkFraming    TdmOptionsCasTrunkFraming,
--         sdpBindCpipePeerCasTrunkFraming     TdmOptionsCasTrunkFraming,
--         sdpBindCpipeLocalUseRtpHeader       TruthValue,
--         sdpBindCpipePeerUseRtpHeader        TruthValue,
--         sdpBindCpipeLocalDifferential       TruthValue,
--         sdpBindCpipePeerDifferential        TruthValue,
--         sdpBindCpipeLocalTimestampFreq      Unsigned32,
--         sdpBindCpipePeerTimestampFreq       Unsigned32
--     }
--
-- sdpBindCpipeLocalPayloadSize OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "bytes"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the local payload size (in bytes)."
--     ::= { sdpBindCpipeEntry 1 }
--
-- sdpBindCpipePeerPayloadSize OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "bytes"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the remote payload size (in bytes).
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if this value has not been received
--                      from the remote peer then this object will be zero (0)."
--     ::= { sdpBindCpipeEntry 2 }
--
-- sdpBindCpipeLocalBitrate OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "64 Kbits/s"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the local bit-rate in multiples of
--                      64 Kbit/s."
--     ::= { sdpBindCpipeEntry 3 }
--
-- sdpBindCpipePeerBitrate OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "64 Kbits/s"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the remote bit-rate in multiples of
--                      64 Kbit/s.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if this value has not been received
--                      from the remote peer then this object will be zero (0)."
--     ::= { sdpBindCpipeEntry 4 }
--
-- sdpBindCpipeLocalSigPkts OBJECT-TYPE
--     SYNTAX          TdmOptionsSigPkts
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the local CE application signalling
--                      packets mode."
--     ::= { sdpBindCpipeEntry 5 }
--
-- sdpBindCpipePeerSigPkts OBJECT-TYPE
--     SYNTAX          TdmOptionsSigPkts
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the remote CE application signalling
--                      packets mode.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if the remote peer does not support
--                      signalling packets then this object will be zero (0)."
--     ::= { sdpBindCpipeEntry 6 }
--
-- sdpBindCpipeLocalCasTrunkFraming OBJECT-TYPE
--     SYNTAX          TdmOptionsCasTrunkFraming
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the local CAS trunk framing mode."
--     ::= { sdpBindCpipeEntry 7 }
--
-- sdpBindCpipePeerCasTrunkFraming OBJECT-TYPE
--     SYNTAX          TdmOptionsCasTrunkFraming
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the remote CAS trunk framing mode.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if the remote peer does not support
--                      CAS trunk framing then this object will be zero (0)."
--     ::= { sdpBindCpipeEntry 8 }
--
-- sdpBindCpipeLocalUseRtpHeader OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates whether a RTP header is used
--                      when packets are transmitted to the remote peer, and
--                      the local peer expects a RTP header when packets are
--                      received from the remote peer."
--     ::= { sdpBindCpipeEntry 9 }
--
-- sdpBindCpipePeerUseRtpHeader OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates whether a RTP header is used
--                      when packets are transmitted by the remote peer, and
--                      the remote peer expects a RTP header when packets are
--                      received from the local peer.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if the remote peer does not support
--                      RTP headers then this object will be 'false'."
--     ::= { sdpBindCpipeEntry 10 }
--
-- sdpBindCpipeLocalDifferential OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates whether differential timestamp
--                      mode is used in the RTP header when packets are
--                      transmitted to the remote peer, and the local peer expects
--                      differential timestamps in the RTP header when packets are
--                      received from the remote peer."
--     ::= { sdpBindCpipeEntry 11 }
--
-- sdpBindCpipePeerDifferential OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates whether differential timestamp mode
--                      is used in the RTP header when packets are transmitted by
--                      the remote peer, and the remote peer expects differential
--                      timestamps in the RTP header when packets are received
--                      from the local peer.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if the remote peer does not support
--                      differential timestamp mode then this object will be
--                      'false'."
--     ::= { sdpBindCpipeEntry 12 }
--
-- sdpBindCpipeLocalTimestampFreq OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "8 KHz"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the timestamp frequency used
--                      in the RTP header when packets are transmitted to the
--                      remote peer, and the local peer expects same timestamp
--                      frequency in the RTP header when packets are received
--                      from the remote peer.
--
--                      This value is in multiples of 8 KHz."
--     ::= { sdpBindCpipeEntry 13 }
--
-- sdpBindCpipePeerTimestampFreq OBJECT-TYPE
--     SYNTAX          Unsigned32
--     UNITS           "8 KHz"
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "This object indicates the timestamp frequency used in
--                      the RTP header when packets are transmitted by the remote
--                      peer, and the remote peer expects the same timestamp
--                      frequency in the RTP header when packets are received
--                      from the local peer.
--                      If there is no remote peer, or if the label mapping has
--                      not been received, or if the remote peer does not support
--                      support RTP headers then this object will be zero (0).
--
--                      This value is in multiples of 8 KHz."
--     ::= { sdpBindCpipeEntry 14 }

-- --------------------------------------------
-- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table
-- --------------------------------------------
-- sdpBindTlsMfibAllowedMdaTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindTlsMfibAllowedMdaEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindTlsMfibAllowedMdaTable has an entry for each
--                      MFIB allowed MDA destination for an SDP Binding configured
--                      in the system."
--     ::= { tnSdpObjs 13 }
--
-- sdpBindTlsMfibAllowedMdaEntry OBJECT-TYPE
--     SYNTAX          SdpBindTlsMfibAllowedMdaEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry represents an MFIB allowed MDA destination
--                      for an SDP Binding configured in the system. Entries can
--                      be created and deleted via SNMP SET operations on the
--                      object sdpBindTlsMfibMdaRowStatus."
--     INDEX           { tnSvcId,
--                       sdpBindId,
--                       tmnxChassisIndex,
--                       tmnxCardSlotNum,
--                       tmnxMDASlotNum }
--     ::= { sdpBindTlsMfibAllowedMdaTable 1 }
--
-- SdpBindTlsMfibAllowedMdaEntry ::=
--     SEQUENCE {
--         sdpBindTlsMfibMdaRowStatus RowStatus
--     }
--
-- sdpBindTlsMfibMdaRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMfibMdaRowStatus controls the
--                      creation and deletion of rows in this table."
--     ::= { sdpBindTlsMfibAllowedMdaEntry 1 }

-- ------------------------------------------
-- SDP Bind TLS L2PT Statistics Table
-- ------------------------------------------
-- sdpBindTlsL2ptStatsTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindTlsL2ptStatsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "A table that contains TLS spoke SDP Bind
--                      Layer 2 Protocol Tunneling Statistics.
--                      This table complements the sdpBindTlsTable. Rows in this
--                      table  are  created  and  deleted automatically by the
--                      system."
--     ::= { tnSdpObjs 16 }
--
-- sdpBindTlsL2ptStatsEntry OBJECT-TYPE
--     SYNTAX          SdpBindTlsL2ptStatsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "TLS specific information about an SDP Bind."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindTlsL2ptStatsTable 1 }
--
-- SdpBindTlsL2ptStatsEntry ::=
--     SEQUENCE {
--         sdpBindTlsL2ptStatsLastClearedTime               TimeStamp,
--         sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx     Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx     Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx        Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx        Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx        Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx        Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx    Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx    Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx       Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx       Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx       Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx       Counter32,
--         sdpBindTlsL2ptStatsStpConfigBpdusRx              Counter32,
--         sdpBindTlsL2ptStatsStpConfigBpdusTx              Counter32,
--         sdpBindTlsL2ptStatsStpRstBpdusRx                 Counter32,
--         sdpBindTlsL2ptStatsStpRstBpdusTx                 Counter32,
--         sdpBindTlsL2ptStatsStpTcnBpdusRx                 Counter32,
--         sdpBindTlsL2ptStatsStpTcnBpdusTx                 Counter32,
--         sdpBindTlsL2ptStatsPvstConfigBpdusRx             Counter32,
--         sdpBindTlsL2ptStatsPvstConfigBpdusTx             Counter32,
--         sdpBindTlsL2ptStatsPvstRstBpdusRx                Counter32,
--         sdpBindTlsL2ptStatsPvstRstBpdusTx                Counter32,
--         sdpBindTlsL2ptStatsPvstTcnBpdusRx                Counter32,
--         sdpBindTlsL2ptStatsPvstTcnBpdusTx                Counter32,
--         sdpBindTlsL2ptStatsOtherBpdusRx                  Counter32,
--         sdpBindTlsL2ptStatsOtherBpdusTx                  Counter32,
--         sdpBindTlsL2ptStatsOtherL2ptBpdusRx              Counter32,
--         sdpBindTlsL2ptStatsOtherL2ptBpdusTx              Counter32,
--         sdpBindTlsL2ptStatsOtherInvalidBpdusRx           Counter32,
--         sdpBindTlsL2ptStatsOtherInvalidBpdusTx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx           Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx          Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx          Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx          Counter32,
--         sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx          Counter32,
--         sdpBindTlsL2ptStatsCdpBpdusRx                    Counter32,
--         sdpBindTlsL2ptStatsCdpBpdusTx                    Counter32,
--         sdpBindTlsL2ptStatsVtpBpdusRx                    Counter32,
--         sdpBindTlsL2ptStatsVtpBpdusTx                    Counter32,
--         sdpBindTlsL2ptStatsDtpBpdusRx                    Counter32,
--         sdpBindTlsL2ptStatsDtpBpdusTx                    Counter32,
--         sdpBindTlsL2ptStatsPagpBpdusRx                   Counter32,
--         sdpBindTlsL2ptStatsPagpBpdusTx                   Counter32,
--         sdpBindTlsL2ptStatsUdldBpdusRx                   Counter32,
--         sdpBindTlsL2ptStatsUdldBpdusTx                   Counter32
--     }
--
-- sdpBindTlsL2ptStatsLastClearedTime OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsLastClearedTime indicates
--                      the last time that these stats were cleared. The value
--                      zero indicates that they have not been cleared yet."
--     ::= { sdpBindTlsL2ptStatsEntry 1 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
--                      number of L2PT encapsulated STP config bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 2 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
--                      number of L2PT encapsulated STP config bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 3 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
--                      number of L2PT encapsulated STP rst bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 4 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
--                      number of L2PT encapsulated STP rst bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 5 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
--                      number of L2PT encapsulated STP tcn bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 6 }
--
-- sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
--                      number of L2PT encapsulated STP tcn bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 7 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
--                      number of L2PT encapsulated PVST config bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 8 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
--                      number of L2PT encapsulated PVST config bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 9 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
--                      number of L2PT encapsulated PVST rst bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 10 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
--                      number of L2PT encapsulated PVST rst bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 11 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
--                      number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 12 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
--                      number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 13 }
--
-- sdpBindTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the
--                      number of STP config bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 14 }
--
-- sdpBindTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the
--                      number of STP config bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 15 }
--
-- sdpBindTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the
--                      number of STP rst bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 16 }
--
-- sdpBindTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the
--                      number of STP rst bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 17 }
--
-- sdpBindTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the
--                      number of STP tcn bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 18 }
--
-- sdpBindTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the
--                      number of STP tcn bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 19 }
--
-- sdpBindTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the
--                      number of PVST config bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 20 }
--
-- sdpBindTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the
--                      number of PVST config bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 21 }
--
-- sdpBindTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the
--                      number of PVST rst bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 22 }
--
-- sdpBindTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the
--                      number of PVST rst bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 23 }
--
-- sdpBindTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the
--                      number of PVST tcn bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 24 }
--
-- sdpBindTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the
--                      number of PVST tcn bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 25 }
--
-- sdpBindTlsL2ptStatsOtherBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the
--                      number of other bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 26 }
--
-- sdpBindTlsL2ptStatsOtherBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the
--                      number of other bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 27 }
--
-- sdpBindTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the
--                      number of other L2PT bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 28 }
--
-- sdpBindTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the
--                      number of other L2PT bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 29 }
--
-- sdpBindTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the
--                      number of other invalid bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 30 }
--
-- sdpBindTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the
--                      number of other invalid bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 31 }
--
-- sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
--                      number of L2PT encapsulated CDP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 32 }
--
-- sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
--                      number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 33 }
--
-- sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
--                      number of L2PT encapsulated VTP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 34 }
--
-- sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
--                      number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 35 }
--
-- sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
--                      number of L2PT encapsulated DTP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 36 }
--
-- sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
--                      number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 37 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
--                      number of L2PT encapsulated PAGP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 38 }
--
-- sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
--                      number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 39 }
--
--
-- sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
--                      number of L2PT encapsulated UDLD bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 40 }
--
-- sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
--                      number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 41 }
--
-- sdpBindTlsL2ptStatsCdpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the
--                      number of CDP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 42 }
--
-- sdpBindTlsL2ptStatsCdpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the
--                      number of CDP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 43 }
--
-- sdpBindTlsL2ptStatsVtpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the
--                      number of VTP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 44 }
--
-- sdpBindTlsL2ptStatsVtpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the
--                      number of VTP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 45 }
--
--
-- sdpBindTlsL2ptStatsDtpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the
--                      number of DTP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 46 }
--
-- sdpBindTlsL2ptStatsDtpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the
--                      number of DTP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 47 }
--
-- sdpBindTlsL2ptStatsPagpBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the
--                      number of PAGP bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 48 }
--
-- sdpBindTlsL2ptStatsPagpBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the
--                      number of PAGP bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 49 }
--
--
-- sdpBindTlsL2ptStatsUdldBpdusRx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the
--                      number of UDLD bpdus received on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 50 }
--
-- sdpBindTlsL2ptStatsUdldBpdusTx OBJECT-TYPE
--     SYNTAX          Counter32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the
--                      number of UDLD bpdus transmitted on this spoke SDP."
--     ::= { sdpBindTlsL2ptStatsEntry 51 }

-- -------------------------
-- PW Template Table
-- -------------------------
 pwTemplateTableLastChanged  OBJECT-TYPE
     SYNTAX          TimeStamp
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of pwTemplateTableLastChanged indicates the
                      sysUpTime at the time of the last modification
                      of pwTemplateTable.

                      If no changes were made to the entry since the last
                      re-initialization of the local network management subsystem,
                      then this object contains a zero value."
     ::= { tnSdpObjs 17 }

 pwTemplateTable OBJECT-TYPE
     SYNTAX          SEQUENCE OF PwTemplateEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "A table that contains entries for pseudowire (PW) templates
                      specifying SDP auto-binding."
     ::= { tnSdpObjs 18 }

 pwTemplateEntry OBJECT-TYPE
     SYNTAX          PwTemplateEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "Information about a specific PW template."
     INDEX           { tnSysSwitchId, pwTemplateId }
     ::= { pwTemplateTable 1 }

 PwTemplateEntry ::=
     SEQUENCE {
         pwTemplateId                           PWTemplateId,
--         pwTemplateRowStatus                    RowStatus,
         pwTemplateLastChanged                  TimeStamp,
--         pwTemplateUseProvisionedSdp            TruthValue,
--         pwTemplateVcType                       SdpBindVcType,
--         pwTemplateAccountingPolicyId           Unsigned32,
--         pwTemplateCollectAcctStats             TruthValue,
--         pwTemplateMacLearning                  TmnxEnabledDisabled,
--         pwTemplateMacAgeing                    TmnxEnabledDisabled,
--         pwTemplateDiscardUnknownSource         TmnxEnabledDisabled,
--         pwTemplateLimitMacMove                 TlsLimitMacMove,
--         pwTemplateMacPinning                   TmnxEnabledDisabled,
--         pwTemplateVlanVcTag                    Unsigned32,
--         pwTemplateMacAddressLimit              Unsigned32,
--         pwTemplateShgName                      TNamedItemOrEmpty,
--         pwTemplateShgDescription               TItemDescription,
--         pwTemplateShgRestProtSrcMac            TruthValue,
--         pwTemplateShgRestUnprotDstMac          TruthValue,
--         pwTemplateEgressMacFilterId            TFilterID,
--         pwTemplateEgressIpFilterId             TFilterID,
--         pwTemplateEgressIpv6FilterId           TFilterID,
--         pwTemplateIngressMacFilterId           TFilterID,
--         pwTemplateIngressIpFilterId            TFilterID,
--         pwTemplateIngressIpv6FilterId          TFilterID,
         pwTemplateIgmpFastLeave                TmnxEnabledDisabled,
--         pwTemplateIgmpImportPlcy               TNamedItemOrEmpty,
         pwTemplateIgmpLastMembIntvl            Unsigned32,
         pwTemplateIgmpMaxNbrGrps               Unsigned32,
         pwTemplateIgmpGenQueryIntvl            Unsigned32,
         pwTemplateIgmpQueryRespIntvl           Unsigned32,
         pwTemplateIgmpRobustCount              Unsigned32,
         pwTemplateIgmpSendQueries              TmnxEnabledDisabled,
--         pwTemplateIgmpMcacPolicyName           TPolicyStatementNameOrEmpty,
--         pwTemplateIgmpMcacUnconstBW            Integer32,
--         pwTemplateIgmpMcacPrRsvMndBW           Integer32,
         pwTemplateIgmpVersion                  TmnxIgmpVersion
--         pwTemplateForceVlanVcForwarding        TruthValue,
--         pwTemplateHashLabel                    TruthValue,
--         pwTemplateControlWord                  TruthValue,
--         pwTemplateHashLabelSignalCap           TruthValue,
--         pwTemplateRestProtSrcMac               TruthValue,
--         pwTemplateRestProtSrcMacAction         INTEGER,
--         pwTemplateAutoLearnMacProtect          TruthValue,
--         pwTemplateShgRestProtSrcMacAct         INTEGER,
--         pwTemplateShgAutoLearnMacProtect       TruthValue,
--         pwTemplateIngQoSNetworkPlcyId          TSdpIngressPolicyID,
--         pwTemplateEgrQoSNetworkPlcyId          TSdpEgressPolicyID,
--         pwTemplateIngQoSFpRedirectQGrp         TNamedItemOrEmpty,
--         pwTemplateEgrQoSPortRedirectQGrp       TNamedItemOrEmpty,
--         pwTemplateIngQoSInstanceId             TQosQGrpInstanceIDorZero,
--         pwTemplateEgrQoSInstanceId             TQosQGrpInstanceIDorZero,
--         pwTemplateBlockOnPeerFault             TruthValue
     }
--
 pwTemplateId        OBJECT-TYPE
     SYNTAX          PWTemplateId
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "The PW template identifier."
     ::= { pwTemplateEntry 1 }

-- pwTemplateRowStatus        OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateRowStatus is used for the
--                      creation and deletion of PW templates."
--     ::= { pwTemplateEntry 2 }
--
 pwTemplateLastChanged        OBJECT-TYPE
     SYNTAX          TimeStamp
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of pwTemplateLastChanged indicates the
                      sysUpTime at the time of the last modification of this
                      entry.

                      If no changes were made to the entry since the last
                      re-initialization of the local network management
                      subsystem, then this object contains a zero value."
     ::= { pwTemplateEntry 3 }

-- pwTemplateUseProvisionedSdp    OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateUseProvisionedSdp specifies
--                      whether the to use an already provisioned SDP.
--                      A value of 'true' specifies that the tunnel manager
--                      will be consulted for an existing active SDP.
--                      Otherwise, a value of 'false' specifies that
--                      the default SDP template will be used to use for
--                      instantiation of the SDP."
--     DEFVAL          { false }
--     ::= { pwTemplateEntry 4 }
--
-- pwTemplateVcType        OBJECT-TYPE
--     SYNTAX          SdpBindVcType
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateVcType specifies the type of
--                      virtual circuit (VC) associated with the SDP Bind."
--     DEFVAL          { ether }
--     ::= { pwTemplateEntry 5 }
--
-- pwTemplateAccountingPolicyId        OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateAccountingPolicyId specifies the
--                      policy to use to collect accounting statistics on
--                      the SDP Bind. The value zero indicates that the
--                      agent should use the default accounting policy,
--                      if one exists."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 6 }
--
-- pwTemplateCollectAcctStats        OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateCollectAcctStats specifies
--                      whether the agent collects accounting statistics for
--                      the SDP Bind. When the value is 'true' the agent
--                      collects accounting statistics on the SDP Bind."
--     DEFVAL          { false }
--     ::= { pwTemplateEntry 7 }
--
-- pwTemplateMacLearning        OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMacLearning specifies whether
--                      the MAC learning process is enabled for the SDP Bind.
--                      The value is ignored if MAC learning is disabled at
--                      service level."
--     DEFVAL          { enabled }
--     ::= { pwTemplateEntry 8 }
--
-- pwTemplateMacAgeing        OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMacAgeing specifies whether
--                      the MAC aging process is enabled for the SDP Bind.
--                      The value is ignored if MAC aging is disabled
--                      at the service level."
--     DEFVAL          { enabled }
--     ::= { pwTemplateEntry 9 }
--
-- pwTemplateDiscardUnknownSource        OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "With the object pwTemplateMacAddressLimit a limit can
--                      be configured for the max number of MAC addresses that
--                      will be learned on the SDP Bind (only for spoke SDPs).
--                      When the limit is reached, packets with unknown source
--                      MAC address are forwarded by default. By setting
--                      sdpBindTlsDiscardUnknownSource to 'enabled', packets with
--                      unknown source MAC will be dropped instead."
--     DEFVAL          { disabled }
--     ::= { pwTemplateEntry 10 }
--
-- pwTemplateLimitMacMove        OBJECT-TYPE
--     SYNTAX          TlsLimitMacMove
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateLimitMacMove specifies the
--                      behavior for when the re-learn rate specified by
--                      svcTlsMacMoveMaxRate is exceeded.
--
--                      When pwTemplateLimitMacMove value is set to 'blockable'
--                      the agent will monitor the MAC relearn rate on the
--                      SDP  Bind, and it will block it when the re-learn rate
--                      specified by svcTlsMacMoveMaxRate is exceeded. When the
--                      value is 'nonBlockable' the SDP Bind will not be
--                      blocked,  and  another  blockable  SDP Bind will be
--                      blocked instead."
--     DEFVAL          { blockable }
--     ::= { pwTemplateEntry 11 }
--
-- pwTemplateMacPinning        OBJECT-TYPE
--     SYNTAX          TmnxEnabledDisabled
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMacPinning specifies
--                      whether or not MAC address pinning is active on the
--                      SDP Bind (mesh or spoke). Setting the value to 'enabled'
--                      disables re-learning of MAC addresses on other SAPs or
--                      SDPs within the same VPLS; the MAC address will hence
--                      remain attached to the SDP Bind for the duration of
--                      its age-timer. This object has effect only for MAC
--                      addresses learned via the normal MAC learning
--                      process, and not for entries learned via DHCP. The
--                      value will be set by default to 'disabled'. However for
--                      a spoke SDP that belongs to a residential SHG, the
--                      value is set to enabled by the system, and cannot be
--                      altered by the operator."
--     DEFVAL { disabled }
--     ::= { pwTemplateEntry 12 }
--
-- pwTemplateVlanVcTag        OBJECT-TYPE
--     SYNTAX          Unsigned32 ('0000'H..'0fff'H)
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateVlanVcTag specifies the VLAN VC tag
--                      for the SDP Bind."
--     DEFVAL          { '0fff'H }
--     ::= { pwTemplateEntry 13 }
--
-- pwTemplateMacAddressLimit        OBJECT-TYPE
--     SYNTAX          Unsigned32 (0..524287)
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMacAddressLimit specifies
--                      the maximum number of learned and static entries
--                      allowed in the FDB for the SDP Bind. The value 0
--                      specifies no limit for the SDP Bind. The command is
--                      valid only for spoke SDPs.
--
--                      When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode
--                      is 'a' or 'b', the maximum value of this object is '131071'.
--
--                      When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode
--                      is 'c', the maximum value of this object is '196607'.
--
--                      When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode
--                      is 'd', the maximum value of this object is '524287'."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 14 }
--
-- pwTemplateShgName        OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateShgName specifies the name of the
--                      split-horizon group where the spoke SDP Bind belongs to.
--                      By default a spoke SDP Bind does not belong to any
--                      split-horizon group. The name specified must
--                      correspond to an existing split-horizon group in the TLS
--                      service where the spoke SDP Bind is defined."
--     DEFVAL          { "" }
--     ::= { pwTemplateEntry 15 }
--
-- pwTemplateShgDescription        OBJECT-TYPE
--     SYNTAX          TItemDescription
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateShgDescription specifies a
--                      user-provided description for split-horizon group on
--                      the SDP Bind."
--     DEFVAL          { "" }
--     ::= { pwTemplateEntry 16 }
--
-- pwTemplateShgRestProtSrcMac        OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateShgRestProtSrcMac specifies
--                      how the agent will handle relearn requests for protected
--                      MAC addresses. When the value of this object is 'true'
--                      requests to relearn a protected MAC address will be
--                      ignored."
--     DEFVAL          { false }
--     ::= { pwTemplateEntry 17 }
--
-- pwTemplateShgRestUnprotDstMac        OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateShgRestUnprotDstMac specifies
--                      how the system will forward packets destined to an
--                      unprotected MAC address. When the value of this object is
--                      'true' packets destined to an unprotected MAC address
--                      will be dropped."
--     DEFVAL          { false }
--     ::= { pwTemplateEntry 18 }
--
-- pwTemplateEgressMacFilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateEgressMacFilterId specifies
--                      the tMacFilterId which indexes an egress filter entry
--                      in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 19 }
--
-- pwTemplateEgressIpFilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateEgressIpFilterId specifies
--                      the tIPFilterId which indexes an egress filter entry
--                      in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 20 }
--
-- pwTemplateEgressIpv6FilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateEgressIpv6FilterId specifies
--                      the tIPv6FilterId which indexes an egress filter entry
--                      in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 21 }
--
-- pwTemplateIngressMacFilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateIngressMacFilterId specifies
--                      the tMacFilterId which indexes an ingress filter entry
--                      in TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 22 }
--
-- pwTemplateIngressIpFilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateIngressIpFilterId specifies
--                      the tIPFilterId which indexes an ingress filter entry
--                      in TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 23 }
--
-- pwTemplateIngressIpv6FilterId        OBJECT-TYPE
--     SYNTAX          TFilterID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateIngressIpv6FilterId specifies
--                      the tIPv6FilterId which indexes an ingress filter entry
--                      in TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no
--                      filter is specified."
--     DEFVAL          { 0 }
--     ::= { pwTemplateEntry 24 }
--
 pwTemplateIgmpFastLeave        OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpFastLeave specifies
                      whether or not fastleave is allowed on the SDP Bind.

                      If set to 'enabled', the system prunes the port on which an IGMP
                      'leave' message has been received without waiting for the Group
                      Specific Query to timeout."
     DEFVAL { disabled }
     ::= { pwTemplateEntry 25 }
--
-- pwTemplateIgmpImportPlcy        OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateIgmpImportPlcy specifies
--                      a policy statement that must be applied to all
--                      incoming IGMP messages on the SDP Bind."
--     DEFVAL { "" }
--     ::= { pwTemplateEntry 26 }
--
 pwTemplateIgmpLastMembIntvl        OBJECT-TYPE
     SYNTAX          Unsigned32 (1..50)
     UNITS           "deci-seconds"
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpLastMembIntvl specifies
                      the Max Response Time (in tenths of a second) used in
                      Group-Specific and Group-Source-Specific Queries sent
                      in response to 'leave' messages. This is also the
                      amount of time between Group-Specific Query messages.

                      This value may be tuned to modify the leave latency of
                      the network. A reduced value results in reduced time to
                      detect the loss of the last member of a group."
     DEFVAL { 10 }
     ::= { pwTemplateEntry 27 }

 pwTemplateIgmpMaxNbrGrps        OBJECT-TYPE
     SYNTAX          Unsigned32 (0..1000)
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpMaxNbrGrps specifies how many
                      group addresses are allowed for the SDP Bind. The value 0
                      means that no limit is imposed."
     DEFVAL { 0 }
     ::= { pwTemplateEntry 28 }

 pwTemplateIgmpGenQueryIntvl        OBJECT-TYPE
     SYNTAX          Unsigned32 (2..1024)
     UNITS           "seconds"
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpGenQueryIntvl specifies
                      the interval (in seconds) between two consecutive general
                      queries sent by the system on the SDP.

                      The value of this object is only meaningful when the value of
                      pwTemplateIgmpSendQueries is 'enabled'."
     DEFVAL { 125 }
     ::= { pwTemplateEntry 29 }

 pwTemplateIgmpQueryRespIntvl        OBJECT-TYPE
     SYNTAX          Unsigned32 (1..1023)
     UNITS           "seconds"
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpQueryRespIntvl specifies the
                      maximum response time (in seconds) advertised in
                      IGMPv2/v3 queries.

                      The value of this object is only meaningful when the value of
                      pwTemplateIgmpSendQueries is 'enabled'."
     DEFVAL { 10 }
     ::= { pwTemplateEntry 30 }

 pwTemplateIgmpRobustCount        OBJECT-TYPE
     SYNTAX          Unsigned32 (2..7)
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpRobustCount specifies the
                      value of the Robust count.

                      This object allows tuning for the expected packet loss on
                      the SDP. If an SDP is expected to be lossy, the Robustness
                      Variable may be increased. IGMP snooping is robust to
                      (Robustness Variable-1) packet losses.

                      The value of this object is only meaningful when the
                      value of pwTemplateIgmpSendQueries is 'enabled'."
     DEFVAL { 2 }
     ::= { pwTemplateEntry 31 }

 pwTemplateIgmpSendQueries        OBJECT-TYPE
     SYNTAX          TmnxEnabledDisabled
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpSendQueries specifies whether
                      the system generates General Queries by itself on the SDP."
     DEFVAL { disabled }
     ::= { pwTemplateEntry 32 }

-- pwTemplateIgmpMcacPolicyName OBJECT-TYPE
--     SYNTAX     TPolicyStatementNameOrEmpty
--     MAX-ACCESS read-create
--     STATUS     obsolete
--     DESCRIPTION
--         "The value of pwTemplateIgmpMcacPolicyName indicates the name
--          of the multicast CAC policy."
--     DEFVAL { "" }
--     ::= { pwTemplateEntry 33 }
--
-- pwTemplateIgmpMcacUnconstBW OBJECT-TYPE
--     SYNTAX      Integer32 (-1|0..2147483647)
--     UNITS       "kbps"
--     MAX-ACCESS  read-create
--     STATUS      obsolete
--     DESCRIPTION
--         "The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth
--          assigned for interface's multicast CAC policy traffic in kilo-bits per
--          second(kbps).
--
--          If the default value of '-1' is set, there is no constraint on
--          bandwidth allocated at the interface.
--
--          If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if
--          a multicast CAC policy is assigned on the interface, then
--          no group (channel) from that policy is allowed on that interface."
--     DEFVAL { -1 }
--     ::= { pwTemplateEntry 34 }
--
-- pwTemplateIgmpMcacPrRsvMndBW OBJECT-TYPE
--     SYNTAX      Integer32 (-1|0..2147483647)
--     UNITS       "kbps"
--     MAX-ACCESS  read-create
--     STATUS      obsolete
--     DESCRIPTION
--         "The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth
--          pre-reserved for all the mandatory channels on a given interface
--          in kilo-bits per second(kbps).
--
--          If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory
--          channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW
--          is '-1', then all mandatory and optional channels are allowed.
--
--          If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the
--          value of pwTemplateIgmpMcacUnconstBW, then all the unconstrained
--          bandwidth on a given interface is allocated to mandatory channels
--          configured through multicast CAC policy on that interface and no
--          optional groups (channels) are allowed.
--
--          The value of pwTemplateIgmpMcacPrRsvMndBW should always be less
--          than or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt
--          to set the value of pwTemplateIgmpMcacPrRsvMndBW greater than
--          that of pwTemplateIgmpMcacUnconstBW will result in
--          'inconsistentValue' error."
--     DEFVAL { -1 }
--     ::= { pwTemplateEntry 35 }
--
 pwTemplateIgmpVersion OBJECT-TYPE
     SYNTAX      TmnxIgmpVersion
     MAX-ACCESS  read-create
     STATUS      current
     DESCRIPTION
         "The value of pwTemplateIgmpVersion specifies the version
          of IGMP for the PW template."
     DEFVAL { version3 }
     ::= { pwTemplateEntry 36 }

-- pwTemplateForceVlanVcForwarding OBJECT-TYPE
--     SYNTAX           TruthValue
--     MAX-ACCESS       read-create
--     STATUS           current
--     DESCRIPTION
--         "The value of pwTemplateForceVlanVcForwarding specifies whether
--          or not vc-vlan-type forwarding is forced in the data-path when
--          pwTemplateVcType is set to 'ether'.  When
--          pwTemplateForceVlanVcForwarding is set to 'true', vc-vlan-type
--          forwarding is forced.
--
--          An 'inconsistentValue' error is returned when an attempt is
--          made to set the value of pwTemplateForceVlanVcForwarding
--          to 'true' and pwTemplateVcType is not set to 'ether'."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 37 }
--
-- pwTemplateHashLabel OBJECT-TYPE
--     SYNTAX           TruthValue
--     MAX-ACCESS       read-create
--     STATUS           current
--     DESCRIPTION
--         "The value of pwTemplateHashLabel specifies whether the use of
--          hash-label is enabled or not for the PW template."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 38 }
--
-- pwTemplateControlWord OBJECT-TYPE
--     SYNTAX           TruthValue
--     MAX-ACCESS       read-create
--     STATUS           current
--     DESCRIPTION
--         "The value of pwTemplateControlWord specifies whether the use of
--          'ControlWord' is enabled on pseudowire packets or not.
--
--          When the value of the object is set to 'true', all VPLS packets
--          are encapsulated with the control word when sent over the pseudowire.
--          When the value of the object is set to 'false', the use of
--          'ControlWord' is disabled."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 39 }
--
-- pwTemplateHashLabelSignalCap OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-create
--     STATUS      current
--     DESCRIPTION
--          "The value of pwTemplateHashLabelSignalCap specifies whether to signal
--           the hash label capability to the remote PE.
--
--           The default value is 'false' and cannot be changed unless
--           pwTemplateHashLabel is set to 'true'."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 40 }
--
-- pwTemplateRestProtSrcMac OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of the object pwTemplateRestProtSrcMac specifies
--          how the agent will handle relearn requests for protected
--          MAC addresses. When the value of this object is 'true'
--          requests to relearn a protected MAC address will be
--          ignored.
--
--          In addition, if the value of pwTemplateRestProtSrcMacAction
--          is 'disable', then the SAP or SDP-BIND where the protected source
--          MAC was seen will be brought operationally down."
--     DEFVAL          { false }
--     ::= { pwTemplateEntry 52 }
--
-- pwTemplateRestProtSrcMacAction OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         disable      (1),
--                         alarmOnly    (2),
--                         discardFrame (3)
--                     }
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of the object pwTemplateRestProtSrcMacAction
--          indicates the action to take whenever a relearn request
--          for a protected MAC is received on a restricted SAP.
--
--          When the value of this object is 'disable' the SAP
--          will be placed in the operational down state, with the
--          operating flag 'recProtSrcMac' set.
--
--          When the value of this object is 'alarmOnly', the SAP or SDP-BIND
--          which sets the restricted MAC will be left up and only a notification,
--          sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac, will be generated.
--
--          When the value of this object is 'discardFrame', the
--          SAP or SDP-BIND which sees the restricted MAC will start discarding
--          the frame in addition to generating sapReceivedProtSrcMac or
--          sdpBindReceivedProtSrcMac notification."
--     DEFVAL          { disable }
--     ::= { pwTemplateEntry 53 }
--
-- pwTemplateAutoLearnMacProtect   OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-create
--     STATUS      current
--     DESCRIPTION
--         "The value of pwTemplateAutoLearnMacProtect specifies whether
--          to enable automatic population of the MAC protect list with
--          source MAC addresses learned on the SAP belonging to this template."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 54 }
--
-- pwTemplateShgRestProtSrcMacAct OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         disable      (1),
--                         alarmOnly    (2),
--                         discardFrame (3)
--                     }
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of the object pwTemplateShgRestProtSrcMacAct
--          indicates the action to take whenever a relearn request
--          for a protected MAC is received on a restricted SAP or SDP-BIND
--          belonging to pwTemplateShgName.
--
--          When the value of this object is 'disable' the SAP or SDP-BIND
--          belonging to pwTemplateShgName will be placed in the operational
--          down state, with the operating flag 'recProtSrcMac' set.
--
--          When the value of this object is 'alarmOnly', the SAP belonging to
--          pwTemplateShgName will be left up and only a notification,
--          sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac,  will be generated.
--
--          When the value of this object is 'discardFrame', the
--          SAP or SDP-BIND belonging to pwTemplateShgName will start discarding
--          the frame in addition to generating sapReceivedProtSrcMac or
--          sdpBindReceivedProtSrcMac notification."
--     DEFVAL          { disable }
--     ::= { pwTemplateEntry 55 }
--
-- pwTemplateShgAutoLearnMacProtect   OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-create
--     STATUS      current
--     DESCRIPTION
--         "The value of pwTemplateShgAutoLearnMacProtect specifies whether
--          to enable automatic population of the MAC protect list with
--          source MAC addresses learned on the SAP or SDP-BIND belonging to
--          pwTemplateShgName."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 56 }
--
-- pwTemplateIngQoSNetworkPlcyId OBJECT-TYPE
--     SYNTAX          TSdpIngressPolicyID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of the pwTemplateIngQoSNetworkPlcyId specifies the
--          ingress QoS network policy applied to this PW template."
--     DEFVAL { 0 }
--     ::= { pwTemplateEntry 57 }
--
-- pwTemplateEgrQoSNetworkPlcyId OBJECT-TYPE
--     SYNTAX          TSdpEgressPolicyID
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of the pwTemplateEgrQoSNetworkPlcyId specifies the
--          egress QoS network policy applied to this PW template."
--     DEFVAL { 0 }
--     ::= { pwTemplateEntry 58 }
--
-- pwTemplateIngQoSFpRedirectQGrp OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of pwTemplateIngQoSFpRedirectQGrp specifies the
--          forwarding-plane queue group Policy for this PW template.
--
--          This object must be set along with
--          pwTemplateIngQoSNetworkPlcyId object.
--
--          An 'inconsistentValue' error is returned if
--          pwTemplateIngQoSFpRedirectQGrp is set to a non-default value and an
--          entry corresponding to tmnxFPNum to which this PW template belongs does
--          not exist in tmnxFPAccIngQGrpTable."
--     DEFVAL { "" }
--     ::= { pwTemplateEntry 59 }
--
-- pwTemplateEgrQoSPortRedirectQGrp OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of pwTemplateEgrQoSPortRedirectQGrp specifies the
--          forwarding-plane queue group Policy for this PW template.
--
--          This object must be set along with
--          pwTemplateEgrQoSNetworkPlcyId object.
--
--          An 'inconsistentValue' error is returned if
--          pwTemplateEgrQoSPortRedirectQGrp is set to a non-default value and an
--          entry corresponding to tmnxFPNum to which this PW template belongs does
--          not exist in tmnxFPAccIngQGrpTable."
--     DEFVAL { "" }
--     ::= { pwTemplateEntry 60 }
--
-- pwTemplateIngQoSInstanceId  OBJECT-TYPE
--     SYNTAX          TQosQGrpInstanceIDorZero
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of pwTemplateIngQoSInstanceId specifies the
--          instance of the forwarding-plane ingress Queue Group for this PW
--          template."
--     DEFVAL { 0 }
--     ::= { pwTemplateEntry 61 }
--
-- pwTemplateEgrQoSInstanceId  OBJECT-TYPE
--     SYNTAX          TQosQGrpInstanceIDorZero
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of pwTemplateEgrQoSInstanceId specifies the
--          instance of the forwarding-plane egress Queue Group for this PW
--          template."
--     DEFVAL { 0 }
--     ::= { pwTemplateEntry 62 }
--
-- pwTemplateBlockOnPeerFault OBJECT-TYPE
--     SYNTAX           TruthValue
--     MAX-ACCESS       read-create
--     STATUS           current
--     DESCRIPTION
--         "The value of pwTemplateBlockOnPeerFault specifies whether to block
--          user traffic being forwarded when peer pw status bits have faults
--          for this PW template."
--     DEFVAL { false }
--     ::= { pwTemplateEntry 63 }

-- ----------------------------------------------
-- PW Template IGMP Snooping Group Source Table
-- ----------------------------------------------
 pwTemplateIgmpSnpgGrpSrcTblLC  OBJECT-TYPE
     SYNTAX          TimeStamp
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates
                      the sysUpTime at the time of the last modification
                      of pwTemplateIgmpSnpgGrpSrcTable.

                      If no changes were made to the entry since the last
                      re-initialization of the local network management subsystem,
                      then this object contains a zero value."
     ::= { tnSdpObjs 19 }

 pwTemplateIgmpSnpgGrpSrcTable OBJECT-TYPE
     SYNTAX          SEQUENCE OF PwTemplateIgmpSnpgGrpSrcEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "A table that contains entries for static IGMP Snooping
                      groups."
     ::= { tnSdpObjs 20 }

 pwTemplateIgmpSnpgGrpSrcEntry    OBJECT-TYPE
     SYNTAX          PwTemplateIgmpSnpgGrpSrcEntry
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "Information about a specific static IGMP Snooping groups."
     INDEX { tnSysSwitchId,
             pwTemplateId,
             pwTemplateIgmpSnpgGrpAddrType,
             pwTemplateIgmpSnpgGrpAddr,
             pwTemplateIgmpSnpgSrcAddrType,
             pwTemplateIgmpSnpgSrcAddr }
     ::= { pwTemplateIgmpSnpgGrpSrcTable 1}

 PwTemplateIgmpSnpgGrpSrcEntry ::=    SEQUENCE {
     pwTemplateIgmpSnpgGrpAddrType  InetAddressType,
     pwTemplateIgmpSnpgGrpAddr      InetAddress,
     pwTemplateIgmpSnpgSrcAddrType  InetAddressType,
     pwTemplateIgmpSnpgSrcAddr      InetAddress,
     pwTemplateIgmpSnpgRowStatus    RowStatus,
     pwTemplateIgmpSnpgLastChngd    TimeStamp
 }

 pwTemplateIgmpSnpgGrpAddrType    OBJECT-TYPE
     SYNTAX          InetAddressType
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "The IP multicast group address type for this entry."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 1 }

 pwTemplateIgmpSnpgGrpAddr        OBJECT-TYPE
     SYNTAX          InetAddress (SIZE(0|4))
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "The IP multicast group address for this entry."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 2 }

 pwTemplateIgmpSnpgSrcAddrType        OBJECT-TYPE
     SYNTAX          InetAddressType
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "The source address type for this entry."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 3 }

 pwTemplateIgmpSnpgSrcAddr        OBJECT-TYPE
     SYNTAX          InetAddress (SIZE(0|4))
     MAX-ACCESS      not-accessible
     STATUS          current
     DESCRIPTION     "The source address for this entry."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 4 }

 pwTemplateIgmpSnpgRowStatus        OBJECT-TYPE
     SYNTAX          RowStatus
     MAX-ACCESS      read-create
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpSnpgRowStatus is used for
                      the creation and deletion of static IGMP snooping entries."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 5 }

 pwTemplateIgmpSnpgLastChngd        OBJECT-TYPE
     SYNTAX          TimeStamp
     MAX-ACCESS      read-only
     STATUS          current
     DESCRIPTION     "The value of pwTemplateIgmpSnpgLastChngd indicates the
                      sysUpTime at the time of the last modification of this
                      entry.

                      If no changes were made to the entry since the last
                      re-initialization of the local network management
                      subsystem, then this object contains a zero value."
     ::= { pwTemplateIgmpSnpgGrpSrcEntry 6 }

-- --------------------------------------------
-- SDP Bind TLS Egress MFIB Allowed MDA Destinations Table
-- --------------------------------------------
-- pwTemplateMfibAllowedMdaTblLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMfibAllowedMdaTblLC indicates
--                      the sysUpTime at the time of the last modification
--                      of pwTemplateMfibAllowedMdaTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management subsystem,
--                      then this object contains a zero value."
--     ::= { tnSdpObjs 21 }
--
-- pwTemplateMfibAllowedMdaTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF PwTemplateMfibAllowedMdaEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The pwTemplateMfibAllowedMdaTable has an entry for each
--                      MFIB allowed MDA destination for an PW template."
--     ::= { tnSdpObjs 22 }
--
-- pwTemplateMfibAllowedMdaEntry OBJECT-TYPE
--     SYNTAX          PwTemplateMfibAllowedMdaEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry represents an MFIB allowed MDA destination
--                      for an PW template configured in the system. Entries
--                      can be created and deleted via SNMP SET operations on the
--                      object pwTemplateMfibMdaRowStatus."
--     INDEX           { pwTemplateId,
--                       tmnxChassisIndex,
--                       tmnxCardSlotNum,
--                       tmnxMDASlotNum }
--     ::= { pwTemplateMfibAllowedMdaTable 1 }
--
-- PwTemplateMfibAllowedMdaEntry ::=
--     SEQUENCE {
--         pwTemplateMfibMdaRowStatus RowStatus
--     }
--
-- pwTemplateMfibMdaRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of pwTemplateMfibMdaRowStatus controls the
--                      creation and deletion of rows in this table."
--     ::= { pwTemplateMfibAllowedMdaEntry 1 }

-- ----------------------------------------
-- SDP BIND TLS MRP Information Table
-- ----------------------------------------
-- sdpBindTlsMrpTableLastChanged  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpTableLastChanged indicates the
--                      sysUpTime at the time of the last modification
--                      of sdpBindTlsMrpTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management subsystem,
--                      then this object contains a zero value."
--     ::= { tnSdpObjs 23 }
--
-- sdpBindTlsMrpTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindTlsMrpEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindTlsMrpTable allows the operator to modify
--                      attributes of the Multiple Registration Protocol (MRP)
--                      feature for the TLS SDP Bind.
--
--                      This table contains an entry for each TLS SDP Bind created
--                      by the user using either sdpBindTlsTable or
--                      sdpBindMeshTlsTable.
--
--                      Rows in this table are created and deleted automatically
--                      by the system."
--     ::= { tnSdpObjs 24 }
--
-- sdpBindTlsMrpEntry OBJECT-TYPE
--     SYNTAX          SdpBindTlsMrpEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry contains objects that allows the
--                      modification of the Multiple Registration Protocol feature
--                      for a specific SDP-Binding in a TLS service."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindTlsMrpTable 1 }
--
-- SdpBindTlsMrpEntry ::=
--     SEQUENCE {
--         sdpBindTlsMrpLastChngd          TimeStamp,
--         sdpBindTlsMrpJoinTime           Unsigned32,
--         sdpBindTlsMrpLeaveTime          Unsigned32,
--         sdpBindTlsMrpLeaveAllTime       Unsigned32,
--         sdpBindTlsMrpPeriodicTime       Unsigned32,
--         sdpBindTlsMrpPeriodicEnabled    TruthValue,
--         sdpBindTlsMrpRxPdus             Counter32,
--         sdpBindTlsMrpDroppedPdus        Counter32,
--         sdpBindTlsMrpTxPdus             Counter32,
--         sdpBindTlsMrpRxNewEvent         Counter32,
--         sdpBindTlsMrpRxJoinInEvent      Counter32,
--         sdpBindTlsMrpRxInEvent          Counter32,
--         sdpBindTlsMrpRxJoinEmptyEvent   Counter32,
--         sdpBindTlsMrpRxEmptyEvent       Counter32,
--         sdpBindTlsMrpRxLeaveEvent       Counter32,
--         sdpBindTlsMrpTxNewEvent         Counter32,
--         sdpBindTlsMrpTxJoinInEvent      Counter32,
--         sdpBindTlsMrpTxInEvent          Counter32,
--         sdpBindTlsMrpTxJoinEmptyEvent   Counter32,
--         sdpBindTlsMrpTxEmptyEvent       Counter32,
--         sdpBindTlsMrpTxLeaveEvent       Counter32,
--         sdpBindTlsMrpPolicy             TNamedItemOrEmpty
--     }
--
-- sdpBindTlsMrpLastChngd        OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpLastChngd indicates the
--                      sysUpTime at the time of the last modification of this
--                      entry.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { sdpBindTlsMrpEntry 1 }
--
-- sdpBindTlsMrpJoinTime OBJECT-TYPE
--     SYNTAX          Unsigned32 (1..10)
--     UNITS           "deci-seconds"
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpJoinTime specifies a timer
--                     value in 10ths of seconds which determines the maximum rate
--                     at which attribute join messages can be sent on the SDP."
--     DEFVAL         { 2 }
--     ::= { sdpBindTlsMrpEntry 2 }
--
-- sdpBindTlsMrpLeaveTime OBJECT-TYPE
--     SYNTAX          Unsigned32 (30..60)
--     UNITS           "deci-seconds"
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpLeaveTime specifies a timer
--                     value in 10ths of seconds which determines the amount of
--                     time a registered attribute is held in leave state before
--                     the registration is removed."
--     DEFVAL         { 30 }
--     ::= { sdpBindTlsMrpEntry 3 }
--
-- sdpBindTlsMrpLeaveAllTime OBJECT-TYPE
--     SYNTAX          Unsigned32 (60..300)
--     UNITS           "deci-seconds"
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpLeaveAllTime specifies a timer
--                     value in 10ths of seconds which determines the frequency
--                     where all attribute declarations on the SDP are all
--                     refreshed."
--     DEFVAL         { 100 }
--     ::= { sdpBindTlsMrpEntry 4 }
--
-- sdpBindTlsMrpPeriodicTime OBJECT-TYPE
--     SYNTAX          Unsigned32 (10..100)
--     UNITS           "deci-seconds"
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpPeriodicTime specifies a timer
--                     value in 10ths of seconds which determines the frequency of
--                     re-transmission of attribute declarations."
--     DEFVAL         { 10 }
--     ::= { sdpBindTlsMrpEntry 5 }
--
-- sdpBindTlsMrpPeriodicEnabled OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpPeriodicEnabled specifies whether
--                     re-transmission of attribute declarations is enabled."
--     DEFVAL         { false }
--     ::= { sdpBindTlsMrpEntry 6 }
--
-- sdpBindTlsMrpRxPdus OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets
--         received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 7 }
--
-- sdpBindTlsMrpDroppedPdus OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped
--         MRP packets on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 8 }
--
-- sdpBindTlsMrpTxPdus OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets
--         transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 9 }
--
-- sdpBindTlsMrpRxNewEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP
--         events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 10 }
--
-- sdpBindTlsMrpRxJoinInEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxJoinInEvent indicates the number of
--         'Join-In' MRP events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 11 }
--
-- sdpBindTlsMrpRxInEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP
--         events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 12 }
--
-- sdpBindTlsMrpRxJoinEmptyEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of
--         'Join Empty' MRP events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 13 }
--
-- sdpBindTlsMrpRxEmptyEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty'
--         MRP events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 14 }
--
-- sdpBindTlsMrpRxLeaveEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave'
--         MRP events received on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 15 }
--
-- sdpBindTlsMrpTxNewEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP
--         events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 16 }
--
-- sdpBindTlsMrpTxJoinInEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxJoinInEvent indicates the number of
--         'Join-In' MRP events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 17 }
--
-- sdpBindTlsMrpTxInEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP
--         events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 18 }
--
-- sdpBindTlsMrpTxJoinEmptyEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of
--         'Join Empty' MRP events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 19 }
--
-- sdpBindTlsMrpTxEmptyEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty'
--         MRP events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 20 }
--
-- sdpBindTlsMrpTxLeaveEvent OBJECT-TYPE
--     SYNTAX           Counter32
--     MAX-ACCESS       read-only
--     STATUS           current
--     DESCRIPTION
--         "The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave'
--         MRP events transmitted on this SDP Bind."
--     ::= { sdpBindTlsMrpEntry 21 }
--
-- sdpBindTlsMrpPolicy OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindTlsMrpPolicy specifies the mrp
--                      policy to control which Group BMAC attributes will
--                      advertise on the egress SDP Bind.
--                     "
--     DEFVAL         { "" }
--     ::= { sdpBindTlsMrpEntry 22 }

-- -------------------------
-- SDP Bind TLS MMRP Table
-- -------------------------
-- sdpBindTlsMmrpTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindTlsMmrpEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "This table contains an entry for each MAC address managed
--                     by Multiple MAC Registration Protocol (MMRP) on the SDP
--                     Bind for the TLS.  Entries are dynamically created and
--                     destroyed by the system as the MAC Addresses are registered
--                     or declared in MMRP."
--     ::= { tnSdpObjs 25 }
--
-- sdpBindTlsMmrpEntry OBJECT-TYPE
--     SYNTAX          SdpBindTlsMmrpEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "MMRP specific information about a MAC address managed by
--                     MMRP on a SDP Bind in a TLS."
--     INDEX           { tnSvcId, sdpBindId, sdpBindTlsMmrpMacAddr }
--     ::= { sdpBindTlsMmrpTable 1 }
--
-- SdpBindTlsMmrpEntry ::=
--     SEQUENCE {
--         sdpBindTlsMmrpMacAddr              MacAddress,
--         sdpBindTlsMmrpDeclared             TruthValue,
--         sdpBindTlsMmrpRegistered           TruthValue,
--         sdpBindTlsMmrpEndStation           TruthValue
--     }
--
-- sdpBindTlsMmrpMacAddr OBJECT-TYPE
--     SYNTAX        MacAddress
--     MAX-ACCESS    not-accessible
--     STATUS        current
--     DESCRIPTION
--         "The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address which
--         is being managed by MMRP on this SAP."
--     ::= { sdpBindTlsMmrpEntry 1 }
--
-- sdpBindTlsMmrpDeclared OBJECT-TYPE
--     SYNTAX        TruthValue
--     MAX-ACCESS    read-only
--     STATUS        current
--     DESCRIPTION
--         "The value of sdpBindTlsMmrpDeclared indicates whether the MRP applicant
--         on this SAP is declaring this MAC address on behalf of MMRP."
--     ::= { sdpBindTlsMmrpEntry 2 }
--
-- sdpBindTlsMmrpRegistered OBJECT-TYPE
--     SYNTAX        TruthValue
--     MAX-ACCESS    read-only
--     STATUS        current
--     DESCRIPTION
--         "The value of sdpBindTlsMmrpRegistered indicates whether the MRP
--         registrant on this SAP has notified MMRP of a registration of this MAC
--         address."
--     ::= { sdpBindTlsMmrpEntry 3 }
--
-- sdpBindTlsMmrpEndStation OBJECT-TYPE
--     SYNTAX        TruthValue
--     MAX-ACCESS    read-only
--     STATUS        current
--     DESCRIPTION
--         "The value of sdpBindTlsMmrpEndStation indicates whether the MRP
--         registrant on this SAP originated per end-station."
--     ::= { sdpBindTlsMmrpEntry 4 }

-- ---------------------------------------------------------------------
--  SDP Auto Bind Bgp Auto-Discovery Info
--
--  Sparse Dependent Extention of the sdpBindTable.
--
--  The same indexes are used for both the base table, sdpBindTable,
--  and the sparse dependent table, sdpAutoBindBgpInfoTable.
--
--  This in effect extends the sdpBindTable with additional columns.
--  Rows are created in the sdpAutoBindBgpInfoTable only for those entries
--  in the sdpBindTable that are created as a result of BGP Auto-discovery.
--
--  Deletion of a row in the sdpBindTable results in the
--  same fate for the row in the sdpAutoBindBgpInfoTable.
-- ---------------------------------------------------------------------
-- sdpAutoBindBgpInfoTableLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpInfoTableLC indicates
--                      the sysUpTime at the time of the last modification
--                      of sdpAutoBindBgpInfoTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { tnSdpObjs 26 }
--
-- sdpAutoBindBgpInfoTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpAutoBindBgpInfoEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpAutoBindBgpInfoTable has an entry for each
--                      SDP Bind entry from sdpBindTable which was
--                      created as a result of BGP Auto-discovery."
--     ::= { tnSdpObjs 27 }
--
-- sdpAutoBindBgpInfoEntry OBJECT-TYPE
--     SYNTAX          SdpAutoBindBgpInfoEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry contains BGP-related information for an
--                      SDP Bind entry created as a result of BGP Auto-discovery."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpAutoBindBgpInfoTable 1 }
--
-- SdpAutoBindBgpInfoEntry ::=
--     SEQUENCE {
--         sdpAutoBindBgpInfoTemplateId   PWTemplateId,
--         sdpAutoBindBgpInfoAGI          TmnxVPNRouteDistinguisher,
--         sdpAutoBindBgpInfoSAII         Unsigned32,
--         sdpAutoBindBgpInfoTAII         Unsigned32
--     }
--
-- sdpAutoBindBgpInfoTemplateId OBJECT-TYPE
--     SYNTAX          PWTemplateId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpInfoTemplateId indicates the
--                      the value of the pwTemplateId object for the
--                      PW template entry used to create this
--                      SDP Bind."
--     ::= { sdpAutoBindBgpInfoEntry 1 }
--
-- sdpAutoBindBgpInfoAGI  OBJECT-TYPE
--     SYNTAX          TmnxVPNRouteDistinguisher
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpInfoAGI indicates the
--                      Attachment Group Identifier (AGI) portion of the
--                      Generalized Id FEC element from the pseudowire
--                      setup for this SDP Bind."
--     ::= { sdpAutoBindBgpInfoEntry 2 }
--
-- sdpAutoBindBgpInfoSAII   OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpInfoSAII indicates the
--                      Source Attachment Individual Identifier (SAII) portion
--                      of the Generalized Id FEC element from the pseudowire
--                      setup for this SDP Bind."
--     ::= { sdpAutoBindBgpInfoEntry 3 }
--
-- sdpAutoBindBgpInfoTAII   OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpInfoTAII indicates the
--                      Target Attachment Individual Identifier (TAII) portion
--                      of the Generalized Id FEC element from the pseudowire
--                      setup for this SDP Bind."
--     ::= { sdpAutoBindBgpInfoEntry 4 }

-- -------------------------------------
-- BGP Auto-Discovery SDP Auto Policy Table
-- -------------------------------------

-- svcTlsBgpADPWTempBindTblLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcTlsBgpADPWTempBindTblLC indicates the
--                      sysUpTime at the time of the last modification
--                      of svcTlsBgpADPWTempBindTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management subsystem,
--                      then this object contains a zero value."
--     ::= { tmnxSvcObjs 32 }
--
-- svcTlsBgpADPWTempBindTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SvcTlsBgpADAutoBindPlcyEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION    "svcTlsBgpADPWTempBindTable contains entries for the
--                     associations between SDP Auto-Bind policies and a
--                     BGP Auto-Discovery context for a VPLS service."
--     ::= { tmnxSvcObjs 33 }
--
-- svcTlsBgpADPWTempBindEntry    OBJECT-TYPE
--     SYNTAX          SvcTlsBgpADAutoBindPlcyEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION    "A SDP Auto-Bind Policy entry in the
--                     svcTlsBgpADPWTempBindTable."
--     INDEX { tnSvcId, pwTemplateId }
--     ::= { svcTlsBgpADPWTempBindTable 1 }
--
-- SvcTlsBgpADAutoBindPlcyEntry ::=    SEQUENCE {
--     svcTlsBgpADPWTempBindRowStatus  RowStatus,
--     svcTlsBgpADPWTempBindLastChngd  TimeStamp,
--     svcTlsBgpADPWTempBindSHG        TNamedItemOrEmpty,
--     svcTlsBgpADPWTempBindOperGrp    TNamedItemOrEmpty
-- }
--
-- svcTlsBgpADPWTempBindRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION    "The value of svcTlsBgpADPWTempBindRowStatus is used
--                     for the creation and deletion of associations between
--                     SDP Auto-Bind policies and a BGP Auto-Discovery context
--                     for a VPLS service."
--     ::= { svcTlsBgpADPWTempBindEntry 1 }
--
-- svcTlsBgpADPWTempBindLastChngd        OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcTlsBgpADPWTempBindLastChngd indicates
--                      the sysUpTime at the time of the last modification of
--                      this entry.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { svcTlsBgpADPWTempBindEntry 2 }
--
--
-- svcTlsBgpADPWTempBindSHG       OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION    "The value of svcTlsBgpADPWTempBindSHG specifies the
--                     split-horizon group to associate with the SDP Auto-Bind
--                     policy in this BGP Auto-Discovery context in a VPLS
--                     service.
--
--                     When this Auto-Bind policy is used to create an SDP,
--                     this split-horizon group will be associated with the
--                     SDP.
--
--                     The name specified must correspond to an
--                     existing split-horizon group in the VPLS service,
--                     otherwise an 'inconsistentValue' error will be
--                     returned."
--      DEFVAL       { "" }
--     ::= { svcTlsBgpADPWTempBindEntry 3 }
--
-- svcTlsBgpADPWTempBindOperGrp OBJECT-TYPE
--     SYNTAX          TNamedItemOrEmpty
--     MAX-ACCESS      read-write
--     STATUS          current
--     DESCRIPTION     "The value of the svcTlsBgpADPWTempBindOperGrp specifies the
--                      Operational-Group identifier associated with this
--                      pseudo-wire template binding."
--     DEFVAL { "" }
--     ::= { svcTlsBgpADPWTempBindEntry 4 }

-- -----------------------------------------
-- BGP Auto-Discovery SDP Auto Policy Route Target Table
-- -----------------------------------------

-- svcTlsBgpADPWTempBindRTTblLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcTlsBgpADPWTempBindRTTblLC indicates the
--                      sysUpTime at the time of the last modification
--                      of svcTlsBgpADPWTempBindRTTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management subsystem,
--                      then this object contains a zero value."
--     ::= { tmnxSvcObjs 34 }
--
-- svcTlsBgpADPWTempBindRTTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SvcTlsBgpADAutoBindPlcyRTEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION    "svcTlsBgpADPWTempBindTable contains entries for Route
--                     Targets associated with a SDP Auto-Bind policy and a
--                     BGP Auto-Discovery context for a VPLS service."
--     ::= { tmnxSvcObjs 35 }
--
-- svcTlsBgpADPWTempBindRTEntry    OBJECT-TYPE
--     SYNTAX          SvcTlsBgpADAutoBindPlcyRTEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION    "A SDP Auto-Bind Policy Route Target entry in the
--                     svcTlsBgpADPWTempBindRTTable."
--     INDEX { tnSvcId, pwTemplateId, IMPLIED svcTlsBgpADPWTempBindRT }
--     ::= { svcTlsBgpADPWTempBindRTTable 1 }
--
-- SvcTlsBgpADAutoBindPlcyRTEntry ::=    SEQUENCE {
--     svcTlsBgpADPWTempBindRT         TNamedItem,
--     svcTlsBgpADPWTempBindRTRowStat  RowStatus
-- }
--
-- svcTlsBgpADPWTempBindRT OBJECT-TYPE
--     SYNTAX          TNamedItem
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION    "The value of svcTlsBgpADPWTempBindRT is the Route
--                     Target associated with a PW template and a
--                     BGP Auto-Discovery context for a VPLS service.
--
--                     When advertisements are received with this Route Target,
--                     the PW template specified by the index, pwTemplateId,
--                     will be used to create the SDP."
--     ::= { svcTlsBgpADPWTempBindRTEntry 1 }
--
-- svcTlsBgpADPWTempBindRTRowStat OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION    "The value of svcTlsBgpADPWTempBindRTRowStat is used
--                     for the association of Route Targets with a SDP Auto-Bind
--                     policy and a BGP Auto-Discovery context for a VPLS
--                     service."
--     ::= { svcTlsBgpADPWTempBindRTEntry 2 }

-- -------------------------
-- L2 Route Table
-- -------------------------

-- svcL2RteTableLastChanged  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteTableLastChanged indicates the
--                      sysUpTime at the time of the last modification of
--                      svcL2RteTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management subsystem,
--                      then this object contains a zero value."
--     ::= { tmnxSvcObjs 38 }
--
-- svcL2RteTable       OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SvcL2RteEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "svcL2RteTable contains entries for L2 routes."
--     ::= { tmnxSvcObjs 39 }
--
-- svcL2RteEntry       OBJECT-TYPE
--     SYNTAX          SvcL2RteEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "An L2 route entry in the svcL2RteTable."
--     INDEX           { tnSvcId,
--                       svcL2RteVsiPrefix,
--                       svcL2RteRouteDistinguisher,
--                       svcL2RteNextHopType,
--                       svcL2RteNextHop }
--     ::= { svcL2RteTable 1}
--
-- SvcL2RteEntry ::= SEQUENCE {
--     svcL2RteVsiPrefix           Unsigned32,
--     svcL2RteRouteDistinguisher  TmnxVPNRouteDistinguisher,
--     svcL2RteNextHopType         InetAddressType,
--     svcL2RteNextHop             InetAddress,
--     svcL2RteSdpBindId           SdpBindId,
--     svcL2RtePwTemplateId        PWTemplateId,
--     svcL2RteError               DisplayString,
--     svcL2RteLastErrorTime       TimeStamp,
--     svcL2RteStatus              INTEGER
-- }
--
-- svcL2RteVsiPrefix   OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteVsiPrefix is the low-order 4 bytes
--                      of the Virtual Switch Instance idendifier (VSI-id) of the
--                      remote VSI for this L2 route."
--     ::= { svcL2RteEntry 1 }
--
-- svcL2RteRouteDistinguisher  OBJECT-TYPE
--     SYNTAX          TmnxVPNRouteDistinguisher
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteRouteDistinguisher is the high-order
--                      6 bytes of the Virtual Switch Instance idendifier (VSI-id)
--                      of the remote VSI for this L2 route."
--     ::= { svcL2RteEntry 2 }
--
-- svcL2RteNextHopType OBJECT-TYPE
--     SYNTAX          InetAddressType
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteNextHopType indicates the address
--                      type of svcL2RteNextHop."
--     ::= { svcL2RteEntry 3 }
--
-- svcL2RteNextHop     OBJECT-TYPE
--     SYNTAX          InetAddress
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteNextHop indicates the IP next hop
--                      for this L2 route. This value is equivilant to the
--                      IP address of the Far End of this L2 route."
--     ::= { svcL2RteEntry 4 }
--
-- svcL2RteSdpBindId     OBJECT-TYPE
--     SYNTAX          SdpBindId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteSdpBindId indicates the SDP bind
--                      ID of the SDP bind that binds this VPLS context to
--                      the VSI indicated by svcL2RteRouteDistinguisher,
--                      svcL2RteVsiPrefix, and svcL2RteNextHop.
--
--                      The value of svcL2RteSdpBindId will be
--                      '0000000000000000'H if there was an error in creating
--                      the L2 route and the svcL2RteError will contain
--                      a string describing the error."
--     ::= { svcL2RteEntry 5 }
--
-- svcL2RtePwTemplateId  OBJECT-TYPE
--     SYNTAX          PWTemplateId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RtePwTemplateId indicates the PW
--                      template associated with the SDP bind that binds
--                      this VPLS context to the VSI indicated by
--                      svcL2RteRouteDistinguisher, svcL2RteVsiPrefix,
--                      and svcL2RteNextHop."
--     ::= { svcL2RteEntry 6 }
--
-- svcL2RteError       OBJECT-TYPE
--     SYNTAX          DisplayString
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteError indicates an error message
--                      describing an error encountered when establishing
--                      this L2 route entry. The value of svcL2RteError will
--                      be a zero-length string when the L2 route is
--                      successfully established."
--     DEFVAL { "" }
--     ::= { svcL2RteEntry 7 }
--
-- svcL2RteLastErrorTime  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteLastErrorTime indicates the
--                      sysUpTime at the time of the last error for
--                      this L2 route entry.
--
--                      If no errors were encountered for this entry since
--                      the last re-initialization of the local network
--                      management subsystem, then this object contains
--                      a zero value."
--     DEFVAL { 0 }
--     ::= { svcL2RteEntry 8 }
--
-- svcL2RteStatus      OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         active   (1),
--                         inactive (2)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2RteStatus indicates the status of the
--                      this L2 Route."
--     ::= { svcL2RteEntry 9 }

-- -------------------------
-- L2 Route Table
-- -------------------------

-- svcL2BgpVplsRteTable       OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SvcL2BgpVplsRteEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "svcL2BgpVplsRteTable contains entries for L2 routes."
--     ::= { tmnxSvcObjs 84 }
--
-- svcL2BgpVplsRteEntry       OBJECT-TYPE
--     SYNTAX          SvcL2BgpVplsRteEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "An L2 route entry in the svcL2BgpVplsRteTable."
--     INDEX           { tnSvcId,
--                       svcL2BgpVplsRteVeId,
--                       svcL2BgpVplsRteRD,
--                       svcL2BgpVplsRteNextHopType,
--                       svcL2BgpVplsRteNextHop }
--     ::= { svcL2BgpVplsRteTable 1}
--
-- SvcL2BgpVplsRteEntry ::= SEQUENCE {
--     svcL2BgpVplsRteVeId                TmnxSiteId,
--     svcL2BgpVplsRteRD                  TmnxVPNRouteDistinguisher,
--     svcL2BgpVplsRteNextHopType         InetAddressType,
--     svcL2BgpVplsRteNextHop             InetAddress,
--     svcL2BgpVplsRteSdpBindId           SdpBindId,
--     svcL2BgpVplsRtePwTemplateId        PWTemplateId,
--     svcL2BgpVplsRteError               DisplayString,
--     svcL2BgpVplsRteLastErrorTime       TimeStamp,
--     svcL2BgpVplsRteControlWord         Unsigned32,
--     svcL2BgpVplsRtePathMtu             Integer32,
--     svcL2BgpVplsRteState               INTEGER,
--     svcL2BgpVplsRteSeqDelivery         Unsigned32,
--     svcL2BgpVplsRteDF                  TruthValue,
--     svcL2BgpVplsRteStatus              INTEGER
-- }
--
-- svcL2BgpVplsRteVeId   OBJECT-TYPE
--     SYNTAX          TmnxSiteId
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteVeId is the low-order 4 bytes
--                      of the Virtual Switch Instance idendifier (VSI-id) of the
--                      remote VSI for this L2 route."
--     ::= { svcL2BgpVplsRteEntry 1 }
--
-- svcL2BgpVplsRteRD  OBJECT-TYPE
--     SYNTAX          TmnxVPNRouteDistinguisher
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteRD is the high-order
--                      6 bytes of the Virtual Switch Instance idendifier (VSI-id)
--                      of the remote VSI for this L2 route."
--     ::= { svcL2BgpVplsRteEntry 2 }
--
-- svcL2BgpVplsRteNextHopType OBJECT-TYPE
--     SYNTAX          InetAddressType
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteNextHopType indicates the address
--                      type of svcL2BgpVplsRteNextHop."
--     ::= { svcL2BgpVplsRteEntry 3 }
--
-- svcL2BgpVplsRteNextHop     OBJECT-TYPE
--     SYNTAX          InetAddress
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteNextHop indicates the IP next hop
--                      for this L2 route. This value is equivilant to the
--                      IP address of the Far End of this L2 route."
--     ::= { svcL2BgpVplsRteEntry 4 }
--
-- svcL2BgpVplsRteSdpBindId     OBJECT-TYPE
--     SYNTAX          SdpBindId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteSdpBindId indicates the SDP bind
--                      ID of the SDP bind that binds this VPLS context to
--                      the VSI indicated by svcL2BgpVplsRteRD,
--                      svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop.
--
--                      The value of svcL2BgpVplsRteSdpBindId will be
--                      '0000000000000000'H if there was an error in creating
--                      the L2 route and the svcL2BgpVplsRteError will contain
--                      a string describing the error."
--     ::= { svcL2BgpVplsRteEntry 5 }
--
-- svcL2BgpVplsRtePwTemplateId  OBJECT-TYPE
--     SYNTAX          PWTemplateId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRtePwTemplateId indicates the PW
--                      template associated with the SDP bind that binds
--                      this VPLS context to the VSI indicated by
--                      svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId,
--                      and svcL2BgpVplsRteNextHop."
--     ::= { svcL2BgpVplsRteEntry 6 }
--
-- svcL2BgpVplsRteError       OBJECT-TYPE
--     SYNTAX          DisplayString
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteError indicates an error message
--                      describing an error encountered when establishing
--                      this L2 route entry. The value of svcL2BgpVplsRteError will
--                      be a zero-length string when the L2 route is
--                      successfully established."
--     DEFVAL { "" }
--     ::= { svcL2BgpVplsRteEntry 7 }
--
-- svcL2BgpVplsRteLastErrorTime  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteLastErrorTime indicates the
--                      sysUpTime at the time of the last error for
--                      this L2 route entry.
--
--                      If no errors were encountered for this entry since
--                      the last re-initialization of the local network
--                      management subsystem, then this object contains
--                      a zero value."
--     DEFVAL { 0 }
--     ::= { svcL2BgpVplsRteEntry 8 }
--
-- svcL2BgpVplsRteControlWord  OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteControlWord indicates the
--                      control word advertised for this route."
--     ::= { svcL2BgpVplsRteEntry 9 }
--
-- svcL2BgpVplsRtePathMtu  OBJECT-TYPE
--     SYNTAX          Integer32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRtePathMtu indicates the layer-2
--                      path MTU for the pseudo-wire to the PE for this route."
--     ::= { svcL2BgpVplsRteEntry 10 }
--
-- svcL2BgpVplsRteState  OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         up   (1),
--                         down (2)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteState indicates state of the
--                      object for this route."
--     ::= { svcL2BgpVplsRteEntry 11 }
--
-- svcL2BgpVplsRteSeqDelivery  OBJECT-TYPE
--     SYNTAX          Unsigned32
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteSeqDelivery indicates the
--                      sequenced delivery flag advertiesed for this route."
--     ::= { svcL2BgpVplsRteEntry 12 }
--
-- svcL2BgpVplsRteDF  OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteDF indicates the value of DF
--                      bit associated with this BGP VPLS L2 route entry."
--     ::= { svcL2BgpVplsRteEntry 13 }
--
-- svcL2BgpVplsRteStatus      OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         active   (1),
--                         inactive (2)
--                     }
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of svcL2BgpVplsRteStatus indicates the status
--                      of the this BGP VPLS L2 Route."
--     ::= { svcL2BgpVplsRteEntry 14 }


-- --------------------------------------------------------
--  svcApplyEvalPwTemplate
-- --------------------------------------------------------
-- The svcApplyEvalPwTemplate group allows to request an
-- action to be performed upon a service.
--
-- Write the service id in the object  'svcApplyEvalPwTemplateSvcId' and
-- pseudowire template id 'pwTemplateId' in the 'svcApplyEvalPwTemplateId' object
-- and the required action in the object 'svcApplyEvalPwTemplateAction'.
-- Writing the value 'doAction (1)' in the object 'svcApplyEvalPwTemplateAction'
-- triggers a request to perform the specified action.
--
-- If the action could be performed successfully, the value of the object
-- svcApplyEvalPwTemplateSuccess equals 'true'.
-- If the value of the object equals 'false', then the value of
-- svcApplyEvalPwTemplateErrorMsg indicates the reason of the failure.
--

-- svcApplyEvalPwTemplate OBJECT IDENTIFIER ::= { tnSdpObjs 28 }
--
-- svcApplyEvalPwTemplateSvcId OBJECT-TYPE
--     SYNTAX      TmnxServId
--     MAX-ACCESS  read-write
--     STATUS      current
--     DESCRIPTION
--         "The value of the object svcApplyEvalPwTemplateSvcId specifies
--          the service identifier to which this action applies."
--     DEFVAL { 0 }
--     ::= { svcApplyEvalPwTemplate 1 }
--
-- svcApplyEvalPwTemplateId OBJECT-TYPE
--     SYNTAX      PWTemplateId
--     MAX-ACCESS  read-write
--     STATUS      current
--     DESCRIPTION
--         "The value of the object svcApplyEvalPwTemplateId specifies the
--          pwTemplateId to apply on the service 'svcApplyEvalPwTemplateSvcId'."
--     DEFVAL { 0 }
--     ::= { svcApplyEvalPwTemplate 2 }
--
-- svcApplyEvalPwTemplateAction OBJECT-TYPE
--     SYNTAX      TmnxActionType
--     MAX-ACCESS  read-write
--     STATUS      current
--     DESCRIPTION
--         "The value of svcApplyEvalPwTemplateAction when set to 'doAction'
--          triggers the action to re-evaluate pseduo-wire template policy
--          'svcApplyEvalPwTemplateId' on the 'svcApplyEvalPwTemplateSvcId'
--          service.
--
--          Reading this object returns the value 'notApplicable'."
--     DEFVAL { notApplicable }
--     ::= { svcApplyEvalPwTemplate 3 }
--
-- svcApplyEvalPwTemplateSuccess OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-only
--     STATUS      current
--     DESCRIPTION
--         "The value of the object svcApplyEvalPwTemplateSuccess indicates
--          whether the action was successful.
--
--          If the value of the object equals 'false', then the value of
--          svcApplyEvalPwTemplateErrorMsg indicates the reason of the failure."
--     DEFVAL { false }
--     ::= { svcApplyEvalPwTemplate 4 }
--
-- svcApplyEvalPwTemplateErrorMsg OBJECT-TYPE
--     SYNTAX      DisplayString (SIZE (0..255))
--     MAX-ACCESS  read-only
--     STATUS      current
--     DESCRIPTION
--         "The value of the object svcApplyEvalPwTemplateErrorMsg indicates
--          the reason of failure, in case the value of the object
--          svcApplyEvalPwTemplateSuccess is equal to 'false'.
--
--          If the value of the object svcApplyEvalPwTemplateSuccess is equal to
--          'true', this object contains an empty string."
--     ::= { svcApplyEvalPwTemplate 5 }
--
-- svcApplyEvalPwTemplateTime OBJECT-TYPE
--     SYNTAX      TimeStamp
--     MAX-ACCESS  read-only
--     STATUS      current
--     DESCRIPTION
--         "The value of the object svcApplyEvalPwTemplateTime indicates
--          the value of sysUpTime at the last time that the object
--          svcApplyEvalPwTemplateSuccess was written by the system."
--     ::= { svcApplyEvalPwTemplate 6 }

-- ------------------------------------------
-- PBB SDP Bind Table
-- ------------------------------------------
-- sdpBindPbbTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindPbbEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "A table that contains
--                      Provider Backbone Bridging (PBB/IEEE 802.1ah) spoke SDP
--                      Bind information."
--     ::= { tnSdpObjs 29 }
--
-- sdpBindPbbEntry OBJECT-TYPE
--     SYNTAX          SdpBindPbbEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "PBB I-Component instance-specific information about
--                      an SDP Bind in the B-Component instance.
--
--                      Entries in this table can be created or deleted
--                      via SNMP operations."
--     INDEX           { sdpBindPbbSvcIdIVpls,
--                       sdpBindPbbSvcIdBVpls,
--                       sdpBindPbbId }
--     ::= { sdpBindPbbTable 1 }
--
-- SdpBindPbbEntry ::=
--     SEQUENCE {
--         sdpBindPbbSvcIdIVpls             TmnxServId,
--         sdpBindPbbSvcIdBVpls             TmnxServId,
--         sdpBindPbbId                     SdpBindId,
--         sdpBindPbbRowStatus              RowStatus,
--         sdpBindPbbLastMgmtChange         TimeStamp,
--         sdpBindPbbIgmpSnpgMRouter        TruthValue
--     }
--
-- sdpBindPbbSvcIdIVpls OBJECT-TYPE
--     SYNTAX          TmnxServId
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindPbbSvcIdIVpls specifies the
--                      Service identifier of the I-Component instance."
--     ::= { sdpBindPbbEntry 1 }
--
-- sdpBindPbbSvcIdBVpls OBJECT-TYPE
--     SYNTAX          TmnxServId
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindPbbSvcIdBVpls specifies the
--                      Service identifier of the B-Component instance."
--     ::= { sdpBindPbbEntry 2 }
--
-- sdpBindPbbId OBJECT-TYPE
--     SYNTAX          SdpBindId
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The value of the object sdpBindPbbId specifies
--                      the identifier of the SDP Binding in the B-Component
--                      instance."
--     ::= { sdpBindPbbEntry 3 }
--
-- sdpBindPbbRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindPbbRowStatus specifies
--                      the row status of this row.
--
--                      The only values supported during a set operation are
--                      'createAndGo' and 'destroy'."
--     ::= { sdpBindPbbEntry 4 }
--
-- sdpBindPbbLastMgmtChange OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION
--                     "The value of sdpBindPbbLastMgmtChange indicates
--                      the sysUpTime at the time of the most recent
--                      management-initiated change to this table row."
--     ::= { sdpBindPbbEntry 5 }
--
-- sdpBindPbbIgmpSnpgMRouter OBJECT-TYPE
--     SYNTAX      TruthValue
--     MAX-ACCESS  read-create
--     STATUS      current
--     DESCRIPTION
--                     "The value of the object sdpBindPbbIgmpSnpgMRouter specifies
--                      if a multicast router is attached behind this SDP Bind."
--     DEFVAL { false }
--     ::= { sdpBindPbbEntry 6 }

-- ----------------------------------------------------------------
-- SDP Binding Fault Propagation Backbone Mac (BMac) Address Table
-- ----------------------------------------------------------------

-- sdpBindFPropBMacAddrTblLastChgd OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION
--         "The value of sdpBindFPropBMacAddrTblLastChgd indicates the sysUpTime
--          at the last modification of sdpBindFPropBMacAddrTable.
--
--          If no changes were made to the table since the last re-initialization
--          of the local network management subsystem, this object contains a zero
--          value."
--     ::= { tnSdpObjs 30 }
--
-- sdpBindFPropBMacAddrTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindFPropBMacAddrEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "sdpBindFPropBMacAddrTable contains the optional configured backbone MAC
--          (BMac) addresses (or MAC names) for each SDP binding.  This table
--          extends the information in sdpBindTable."
--     ::= { tnSdpObjs 31 }
--
-- sdpBindFPropBMacAddrEntry OBJECT-TYPE
--     SYNTAX          SdpBindFPropBMacAddrEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "sdpBindFPropBMacAddrEntry defines a row in the
--          sdpBindFPropBMacAddrTable.  Rows are created and destroyed using
--          sdpBindFPropBMacAddrRowStatus.  A prerequisite for row creation:  a
--          row with the same tnSvcId and sdpBindId must be present in the
--          sdpBindTable."
--     INDEX           {
--                         tnSvcId,
--                         sdpBindId,
--                         sdpBindFPropBMacAddrOrMacNameTag,
--                         sdpBindFPropBMacAddrOrMacName
--                     }
--     ::= { sdpBindFPropBMacAddrTable 1 }
--
-- SdpBindFPropBMacAddrEntry ::=
--     SEQUENCE {
--         sdpBindFPropBMacAddrOrMacNameTag INTEGER,
--         sdpBindFPropBMacAddrOrMacName    TNamedItem,
--         sdpBindFPropBMacAddrRowStatus    RowStatus
--     }
--
-- sdpBindFPropBMacAddrOrMacNameTag OBJECT-TYPE
--     SYNTAX          INTEGER {
--                         macName (1),
--                         macAddr (2)
--                     }
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "The value of sdpBindFPropBMacAddrOrMacNameTag specifies whether
--          sdpBindFPropBMacAddrOrMacName contains a MAC name, or a MAC address."
--     ::= { sdpBindFPropBMacAddrEntry 1 }
--
-- sdpBindFPropBMacAddrOrMacName OBJECT-TYPE
--     SYNTAX          TNamedItem
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "The value of sdpBindFPropBMacAddrOrMacName specifies a MAC name or MAC
--          address configured against a <tnSvcId, sdpBindId> index pair.
--
--          When sdpBindFPropBMacAddrOrMacNameTag is 'macName (1)',
--          sdpBindFPropBMacAddrOrMacName must contain a MAC name which is
--          present in the svcMacName column of the svcMacNameTable.
--
--          When sdpBindFPropBMacAddrOrMacNameTag is 'macAddr (2)',
--          sdpBindFPropBMacAddrOrMacName must contain a MAC address, encoded in
--          network byte order and IEEE 802.3 canonical bit order as defined in
--          IEEE Std 802-2001.
--
--          All the MAC addresses configured for a particular SDP (whether
--          configured as MAC addresses, or via MAC names) must refer to one
--          B-VPLS on the remote system."
--     ::= { sdpBindFPropBMacAddrEntry 2 }
--
-- sdpBindFPropBMacAddrRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "The value of sdpBindFPropBMacAddrRowStatus specifies the status of this
--          row."
--     ::= { sdpBindFPropBMacAddrEntry 3 }

-- ---------------------------------------------------------------------
--  SDP Auto Bind Bgp VPLS Info
--
--  Sparse Dependent Extention of the sdpBindTable.
--
--  The same indexes are used for both the base table, sdpBindTable,
--  and the sparse dependent table, sdpAutoBindBgpVplsTable.
--
--  This in effect extends the sdpBindTable with additional columns.
--  Rows are created in the sdpAutoBindBgpVplsTable only for those entries
--  in the sdpBindTable that are created as a result of BGP VPLS bindings.
--
--  Deletion of a row in the sdpBindTable results in the
--  same fate for the row in the sdpAutoBindBgpVplsTable.
-- ---------------------------------------------------------------------
-- sdpAutoBindBgpVplsTableLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpVplsTableLC indicates
--                      the sysUpTime at the time of the last modification
--                      of sdpAutoBindBgpVplsTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { tnSdpObjs 32 }
--
-- sdpAutoBindBgpVplsTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpAutoBindBgpVplsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpAutoBindBgpVplsTable has an entry for each
--                      SDP Bind entry from sdpBindTable which was
--                      created as a result of BGP VPLS binding."
--     ::= { tnSdpObjs 33 }
--
-- sdpAutoBindBgpVplsEntry OBJECT-TYPE
--     SYNTAX          SdpAutoBindBgpVplsEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry contains BGP-related information for an
--                      SDP Bind entry created as a result of BGP VPLS binding."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpAutoBindBgpVplsTable 1 }
--
-- SdpAutoBindBgpVplsEntry ::=
--     SEQUENCE {
--         sdpAutoBindBgpVplsTemplateId   PWTemplateId
--     }
--
-- sdpAutoBindBgpVplsTemplateId OBJECT-TYPE
--     SYNTAX          PWTemplateId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAutoBindBgpVplsTemplateId indicates the
--                      the value of the pwTemplateId object for the
--                      PW template entry used to create this
--                      SDP Bind."
--     ::= { sdpAutoBindBgpVplsEntry 1 }

-- ---------------------------------------------------------------------
--  SDP Auto Bind Bgp Auto-Discovery
--
--  Sparse Dependent Extention of the sdpBindTable.
--
--  The same indexes are used for both the base table, sdpBindTable,
--  and the sparse dependent table, sdpAtBndBgp129Type2Table.
--
--  This in effect extends the sdpBindTable with additional columns.
--  Rows are created in the sdpAtBndBgp129Type2Table only for those entries
--  in the sdpBindTable that are created as a result of BGP Auto-discovery.
--
--  Deletion of a row in the sdpBindTable results in the
--  same fate for the row in the sdpAtBndBgp129Type2Table.
-- ---------------------------------------------------------------------
-- sdpAtBndBgp129Type2TableLC  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAtBndBgp129Type2TableLC indicates
--                      the sysUpTime at the time of the last modification
--                      of sdpAtBndBgp129Type2Table.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { tnSdpObjs 34 }
--
-- sdpAtBndBgp129Type2Table OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpAtBndBgp129Type2Entry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpAtBndBgp129Type2Table has an entry for each
--                      SDP Bind entry from sdpBindTable which was
--                      created as a result of BGP Auto-discovery with a FEC-129
--                      Type 2."
--     ::= { tnSdpObjs 35 }
--
-- sdpAtBndBgp129Type2Entry OBJECT-TYPE
--     SYNTAX          SdpAtBndBgp129Type2Entry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry contains BGP-related information for an
--                      SDP Bind entry created as a result of BGP Auto-discovery
--                      with a FEC-129 Type 2."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpAtBndBgp129Type2Table 1 }
--
-- SdpAtBndBgp129Type2Entry ::=
--     SEQUENCE {
--         sdpAtBndBgp129Type2TemplateId   PWTemplateId,
--         sdpAtBndBgp129Type2SaiiGlobalId TmnxPwGlobalId,
--         sdpAtBndBgp129Type2SaiiPrefix   Unsigned32,
--         sdpAtBndBgp129Type2SaiiAcId     Unsigned32,
--         sdpAtBndBgp129Type2TaiiGlobalId TmnxPwGlobalId,
--         sdpAtBndBgp129Type2TaiiPrefix   Unsigned32,
--         sdpAtBndBgp129Type2TaiiAcId     Unsigned32
--     }
--
-- sdpAtBndBgp129Type2TemplateId OBJECT-TYPE
--     SYNTAX          PWTemplateId
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpAtBndBgp129Type2TemplateId indicates the
--                      the value of the pwTemplateId object for the
--                      PW template entry used to create this
--                      SDP Bind."
--     ::= { sdpAtBndBgp129Type2Entry 1 }
--
-- sdpAtBndBgp129Type2SaiiGlobalId OBJECT-TYPE
--     SYNTAX     TmnxPwGlobalId
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2SaiiGlobalId specifies the global
--          identifier of Source Attachment Individual Identifier (SAII) portion
--          of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 2 }
--
-- sdpAtBndBgp129Type2SaiiPrefix OBJECT-TYPE
--     SYNTAX     Unsigned32
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2SaiiPrefix specifies the prefix to the
--          Source Attachment Individual Identifier (SAII) portion
--          of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 3 }
--
-- sdpAtBndBgp129Type2SaiiAcId OBJECT-TYPE
--     SYNTAX     Unsigned32
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2SaiiAcId specifies the attachment
--          circuit identifier part of Source Attachment Individual Identifier
--          (SAII) portion of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 4 }
--
-- sdpAtBndBgp129Type2TaiiGlobalId OBJECT-TYPE
--     SYNTAX     TmnxPwGlobalId
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2TaiiGlobalId specifies the global
--          identifier of Taget Attachment Individual Identifier (TAII) portion
--          of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 5 }
--
-- sdpAtBndBgp129Type2TaiiPrefix OBJECT-TYPE
--     SYNTAX     Unsigned32
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2TaiiPrefix specifies the prefix to the
--          Taget Attachment Individual Identifier (TAII) portion
--          of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 6 }
--
-- sdpAtBndBgp129Type2TaiiAcId OBJECT-TYPE
--     SYNTAX     Unsigned32
--     MAX-ACCESS read-only
--     STATUS     current
--     DESCRIPTION
--         "The value of sdpAtBndBgp129Type2TaiiAcId specifies the attachment
--          circuit identifier part of Taget Attachment Individual Identifier
--          (TAII) portion of the Generalized Id FEC element as used by
--          this multi-segment pseudo-wire provider-edge in this service."
--     ::= { sdpAtBndBgp129Type2Entry 7 }

-- ---------------------------------------------------------------------
--  SDP-Binding ETH-CFM Extension Table
--
--  Sparse Dependent Extention of the sdpBindTable.
--
--  The same indexes are used for both the base table, sdpBindTable
--
--  This in effect extends the sdpBindTable with additional columns.
--  Rows are created in the sdpBindEthCfmTable only for those entries
--  in the sdpBindTable that are created on services with ETH-CFM support.
--
--  Deletion of a row in the sdpBindTable results in the
--  same fate for the row in the sdpBindEthCfmTable.
-- ---------------------------------------------------------------------
-- sdpBindEthCfmTableLastChanged    OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindEthCfmTableLastChanged indicates
--                      the sysUpTime at the time of the last modification
--                      of the sdpBindEthCfmTable.
--
--                      If no changes were made to the entry since the last
--                      re-initialization of the local network management
--                      subsystem, then this object contains a zero value."
--     ::= { tnSdpObjs 36 }
--
-- sdpBindEthCfmTable               OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindEthCfmEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "The sdpBindEthCfmEntry has an entry for each
--                      SDP Bind entry from sdpBindTable which was
--                      created on a service with ETH-CFM support."
--     ::= { tnSdpObjs 37 }
--
-- sdpBindEthCfmEntry OBJECT-TYPE
--     SYNTAX          SdpBindEthCfmEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION     "Each row entry contains BGP-related information for an
--                      SDP Bind entry created as a result of BGP Auto-discovery
--                      with a FEC-129 Type 2."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindEthCfmTable 1 }
--
-- SdpBindEthCfmEntry               ::= SEQUENCE {
--     sdpBindEthCfmRowLastChanged      TimeStamp,
--     sdpBindEthCfmVMepFilter          TruthValue
-- }
--
-- sdpBindEthCfmRowLastChanged      OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindEthCfmRowLastChanged indicates the
--                      sysUpTime at the time of the last modification to an object
--                      for this row.
--
--                      If no changes were made to the entry since the
--                      instantiation of the row, then this object contains a zero
--                      value."
--     ::= { sdpBindEthCfmEntry 1 }
--
-- sdpBindEthCfmVMepFilter          OBJECT-TYPE
--     SYNTAX          TruthValue
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION     "The value of sdpBindEthCfmVMepFilter specifies whether
--                      ETH-CFM PDUs egressing the sap or sdp-binding at the same
--                      level or lower than that of the configured service MEP
--                      (the virtual MEP) should be discarded or continue to
--                      egress.
--
--                      Only PDUs that were originated from the virtual MEP or from
--                      the networks side of the service will be affected, local
--                      down MEP ETH-CFM transmission are not.  When set to 'true'
--                      ETH-CFM PDUs with the same or lower level as the virtual
--                      MEP will be discarded.  When set to 'false', egressing
--                      ETH-CFM PDUs will pass freely as per the existing ETH-CFM
--                      configuration."
--    DEFVAL { false }
--    ::= { sdpBindEthCfmEntry 2 }

-- sdpBind shortest path bridging (SPB) table

-- sdpBindTlsSpbTblLastChanged  OBJECT-TYPE
--     SYNTAX          TimeStamp
--     MAX-ACCESS      read-only
--     STATUS          current
--     DESCRIPTION
--         "The value of sdpBindTlsSpbTblLastChanged indicates the sysUpTime
--          at the time of the last modification of sdpBindTlsSpbTable.
--
--          If no changes were made to the entry since the last re-initialization
--          of the local network management subsystem, then this object contains a
--          zero value."
--     ::= { tnSdpObjs 38 }
--
-- sdpBindTlsSpbTable OBJECT-TYPE
--     SYNTAX          SEQUENCE OF SdpBindTlsSpbEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "A table that contains TLS SDP-Bind specific Shortest Path Bridging
--         (SPB) information."
--     ::= { tnSdpObjs 39 }
--
-- sdpBindTlsSpbEntry OBJECT-TYPE
--     SYNTAX          SdpBindTlsSpbEntry
--     MAX-ACCESS      not-accessible
--     STATUS          current
--     DESCRIPTION
--         "A row-entry that contains TLS SDP-Bind specific SPB information."
--     INDEX           { tnSvcId, sdpBindId }
--     ::= { sdpBindTlsSpbTable 1 }
--
-- SdpBindTlsSpbEntry ::=
--     SEQUENCE {
--         sdpBindTlsSpbRowStatus         RowStatus,
--         sdpBindTlsSpbLastChgd          TimeStamp,
--         sdpBindTlsSpbIfIndex           InterfaceIndexOrZero,
--         sdpBindTlsSpbAdminState        TmnxAdminState
--     }
--
-- sdpBindTlsSpbRowStatus OBJECT-TYPE
--     SYNTAX          RowStatus
--     MAX-ACCESS      read-create
--     STATUS          current
--     DESCRIPTION
--         "This value of the object sdpBindTlsSpbRowStatus specifies the
--          status of this row."
--     ::= { sdpBindTlsSpbEntry 1 }
--
-- sdpBindTlsSpbLastChgd OBJECT-TYPE
--     SYNTAX       TimeStamp
--     MAX-ACCESS   read-only
--     STATUS       current
--     DESCRIPTION
--         "The value of sdpBindTlsSpbLastChgd indicates the timestamp of last
--         change to this row in sdpBindTlsSpbTable."
--     ::= { sdpBindTlsSpbEntry 2 }
--
-- sdpBindTlsSpbIfIndex OBJECT-TYPE
--     SYNTAX       InterfaceIndexOrZero
--     MAX-ACCESS   read-only
--     STATUS       current
--     DESCRIPTION
--         "The value of sdpBindTlsSpbIfIndex indicates the interface index
--          assigned to this SDP-Bind for Shortest Path Bridging."
--     ::= { sdpBindTlsSpbEntry 3 }
--
-- sdpBindTlsSpbAdminState OBJECT-TYPE
--     SYNTAX      TmnxAdminState
--     MAX-ACCESS  read-create
--     STATUS      current
--     DESCRIPTION
--         "The sdpBindTlsSpbAdminState indicates the  desired administrative state
--          for Shortest Path Bridging on this sdp-bind."
--     DEFVAL { outOfService }
--     ::= { sdpBindTlsSpbEntry 4 }

-- SDP binding Pseudo-Wire Port table

sdpPwPortTblLastChanged  OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortTblLastChanged indicates the sysUpTime
         at the time of the last modification of sdpPwPortTable.

         If no changes were made to the entry since the last re-initialization
         of the local network management subsystem, then this object contains a
         zero value."
    ::= { tnSdpObjs 40 }

sdpPwPortTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpPwPortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A table that contains SDP specific pseudo-wire port information."
    ::= { tnSdpObjs 41 }

sdpPwPortEntry OBJECT-TYPE
    SYNTAX          SdpPwPortEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "A row-entry that contains port specific pseudo-wire information."
    INDEX           { tnSysSwitchId, sdpId, sdpPwPortId }
    ::= { sdpPwPortTable 1 }

SdpPwPortEntry ::=
    SEQUENCE {
        sdpPwPortId                    Unsigned32,
        sdpPwPortRowStatus             RowStatus,
        sdpPwPortLastChgd              TimeStamp,
        sdpPwPortAdminStatus           ServiceAdminStatus,
        sdpPwPortVcId                  TmnxVcId,
        sdpPwPortEncapType             INTEGER,
        sdpPwPortOperStatus            INTEGER,
        sdpPwPortOperFlags             BITS,
        sdpPwPortVcType                SdpBindVcType,
        sdpPwPortVlanVcTag             Unsigned32,
        sdpPwPortEgrShapVPort          TNamedItemOrEmpty,
        sdpPwPortEgrShapDefIntDestId   TNamedItemOrEmpty
    }

sdpPwPortId OBJECT-TYPE
    SYNTAX          Unsigned32 (1..10239)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This value of the object sdpPwPortId specifies the pseudo-wire
         port identifier associated with the SDP."
    ::= { sdpPwPortEntry 1 }

sdpPwPortRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This value of the object sdpPwPortRowStatus specifies the
         status of this row.

         The value of sdpPwPortVcId must be set to a non-default value when
         creating a row."
    ::= { sdpPwPortEntry 2 }

sdpPwPortLastChgd OBJECT-TYPE
    SYNTAX       TimeStamp
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The value of sdpPwPortLastChgd indicates the timestamp of last
        change to this row in sdpPwPortTable."
    ::= { sdpPwPortEntry 3 }

sdpPwPortAdminStatus OBJECT-TYPE
    SYNTAX          ServiceAdminStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of the object sdpPwPortAdminStatus specifies
         the administrative state of this pseudo-wire port entry."
    DEFVAL          { down }
    ::= { sdpPwPortEntry 4 }

sdpPwPortVcId OBJECT-TYPE
    SYNTAX       TmnxVcId
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The value of sdpPwPortVcId specifies the virtual-circuit identifier
         associated with this pseudo-wire port entry.

         An 'inconsitentValue' error is returned if an attempt is made to create
         a row-entry in this table without specifying value of this object."
    ::= { sdpPwPortEntry 5 }

sdpPwPortEncapType OBJECT-TYPE
    SYNTAX       INTEGER {
                     dot1q (2),
                     qinq  (10)
                 }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "The value of sdpPwPortEncapType specifies the encapsulation type
         of this pseudo-wire port entry."
    DEFVAL { dot1q }
    ::= { sdpPwPortEntry 6 }


sdpPwPortOperStatus OBJECT-TYPE
    SYNTAX          INTEGER {
                        up                 (1),
                        down               (5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortOperStatus indicates the operating status of
         this Service-SDP binding.
            'up'               The Service-SDP binding is operational.

            'down'             The binding is administratively down.
        "

    ::= { sdpPwPortEntry 7 }

sdpPwPortOperFlags OBJECT-TYPE
    SYNTAX          BITS {
                        sdpBindAdminDown       (0), -- SDP Bind is admin down
                        svcAdminDown           (1), -- Service is admin down
                        sapOperDown            (2), -- SAP is oper down
                                                    -- (VLL's only)
                        sdpOperDown            (3), -- SDP is oper down
                        sdpPathMtuTooSmall     (4), -- SDP's path MTU minus SDP
                                                    -- Bind control word size is
                                                    -- less than Service MTU
                        noIngressVcLabel       (5), -- No ingress VC label
                        noEgressVcLabel        (6), -- No egress VC label
                        svcMtuMismatch         (7), -- Service MTU mismatch with
                                                    -- the remote PE
                        vcTypeMismatch         (8), -- VC type mismatch with the
                                                    -- remote PE
                        relearnLimitExceeded   (9), -- MAC relearn limit was
                                                    -- exceeded (TLS only)
                        iesIfAdminDown         (10),-- IP interface is admin
                                                    -- down (IES and VPRN only)
                        releasedIngressVcLabel (11),-- Peer released our ingress
                                                    -- VC label
                        labelsExhausted        (12),-- Label Manager has ran out
                                                    -- of labels
                        svcParamMismatch       (13),-- Service-specific
                                                    -- parameter mismatch
                        insufficientBandwidth  (14),-- Insufficient bandwidth to
                                                    -- allocate to SDP binding
                        pwPeerFaultStatusBits  (15),-- Received PW fault status
                                                    -- bits from peer
                        meshSdpDown            (16),-- Mesh SDP Down
                        notManagedByMcRing     (17),-- Not managed by mc-ring
                        outOfResource          (18),-- Such as memory
                        mhStandby              (19),-- Standby due to BGP
                                                    -- multi-home protocol
                        oamDownMepFault        (20),-- ETH-CFM down MEP fault
                                                    -- detected.
                        oamUpMepFault          (21),-- ETH-CFM up MEP fault
                                                    -- detected.
                        standbySigSlaveTxDown  (22),-- Transmit is down for
                                                    -- standby-sig-spoke.
                        operGrpDown            (23),-- Operational group is down
                        withdrawnIngressVcLabel(24) -- Ingress label withdrawn
                                                    -- due to incompatibility.
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION     "This object specifies all the conditions that affect the
                     operating status of this pseudo-wire port:

                     The bit values are as follows:

             sdpBindAdminDown        (0) - SDP Bind is admin down.
             svcAdminDown            (1) - Service is admin down.
             sapOperDown             (2) - SAP is oper down (VLL's only).
             sdpOperDown             (3) - SDP is oper down.
             sdpPathMtuTooSmall      (4) - SDP's path MTU minus SDP Bind control
                                           word size is less than Service MTU.
             noIngressVcLabel        (5) - No ingress VC label.
             noEgressVcLabel         (6) - No egress VC label.
             svcMtuMismatch          (7) - Service MTU mismatch with the
                                           remote PE.
             vcTypeMismatch          (8) - VC type mismatch with the remote PE.
             relearnLimitExceeded    (9) - MAC relearn limit was exceeded
                                           (TLS only).
             iesIfAdminDown         (10) - IP interface is admin down
                                           (IES and VPRN only).
             releasedIngressVcLabel (11) - Peer released our ingress VC label.
             labelsExhausted        (12) - Label Manager has ran out of labels.
             svcParamMismatch       (13) - Service-specific parameter mismatch.
             insufficientBandwidth  (14) - Insufficient bandwidth to allocate
                                           to SDP binding.
             pwPeerFaultStatusBits  (15) - Received PW fault status bits from
                                           peer.
             meshSdpDown            (16) - Mesh SDP Down.
             notManagedByMcRing     (17) - Not managed by mc-ring.
             outOfResource          (18) - Such as memory.
             mhStandby              (19) - Standby due to BGP.
                                         - multi-home protocol.
             oamDownMepFault        (20) - ETH-CFM down MEP fault detected.
             oamUpMepFault          (21) - ETH-CFM up MEP fault detected.
             standbySigSlaveTxDown  (22) - Transmit is down for
                                         - standby-sig-spoke.
             operGrpDown            (23) - Operational group is down.
             withdrawnIngressVcLabel(24) - Withdrawn due to Incompatiblity."
    ::= { sdpPwPortEntry 8 }

sdpPwPortVcType OBJECT-TYPE
    SYNTAX          SdpBindVcType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortVcType specifies the type of virtual circuit
        (VC) associated with this pseudo-wire port entry."
    DEFVAL          { ether }
    ::= { sdpPwPortEntry 9 }

sdpPwPortVlanVcTag OBJECT-TYPE
    SYNTAX          Unsigned32 ('0000'H..'0fff'H)
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortVlanVcTag specifies the VLAN VC tag
         for this pseudo-wire port entry."
    DEFVAL          { '0fff'H }
    ::= { sdpPwPortEntry 10 }

sdpPwPortEgrShapVPort OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortEgrShapVPort specifies the virtual port name of
         the shaper on the egress side for this pseudo-wire port entry."
    DEFVAL          { ''H }
    ::= { sdpPwPortEntry 11 }

sdpPwPortEgrShapDefIntDestId OBJECT-TYPE
    SYNTAX          TNamedItemOrEmpty
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpPwPortEgrShapDefIntDestId specifies the default
         intermediate destination identifier on the egress side which will
         eventualy map to an HSMDAv2 secondary shaper for this
         pseudo-wire port entry."
    DEFVAL          { ''H }
    ::= { sdpPwPortEntry 12 }

-- -------------------------
-- SDP Bind PW Path Table
-- -------------------------
sdpBindPwPathTableLastChanged  OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpBindPwPathTableLastChanged indicates the
         sysUpTime at the time of the last modification
         of sdpBindPwPathTable.

         If no changes were made to the entry since the last
         re-initialization of the local network management subsystem,
         then this object contains a zero value."
    ::= { tnSdpObjs 50 }

sdpBindPwPathTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpBindPwPathEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The sdpBindPwPathTable contains Pseudo-Wire path information per
         SDP binding."
    ::= { tnSdpObjs 51 }

sdpBindPwPathEntry OBJECT-TYPE
    SYNTAX          SdpBindPwPathEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The sdpBindPwPathEntry contains Pseudo-Wire path information for
         specific SDP binding."
    INDEX           { tnSysSwitchId, tnSvcId, sdpBindId }
    ::= { sdpBindPwPathTable 1 }

SdpBindPwPathEntry ::=
    SEQUENCE {
        sdpBindPwPathRowStatus      RowStatus,
        sdpBindPwPathLastChanged    TimeStamp,
        sdpBindPwPathAgi            TmnxVPNRouteDistinguisher,
        sdpBindPwPathSaiiGlobalId   TmnxMplsTpGlobalID,
        sdpBindPwPathSaiiNodeId     TmnxMplsTpNodeID,
        sdpBindPwPathSaiiAcId       Unsigned32,
        sdpBindPwPathTaiiGlobalId   TmnxMplsTpGlobalID,
        sdpBindPwPathTaiiNodeId     TmnxMplsTpNodeID,
        sdpBindPwPathTaiiAcId       Unsigned32
    }

sdpBindPwPathRowStatus        OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "The value of sdpBindPwPathRowStatus is used for the
         creation and deletion of entries in the table."
    ::= { sdpBindPwPathEntry 1 }

sdpBindPwPathLastChanged        OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpBindPwPathLastChanged indicates the
         sysUpTime at the time of the last modification of this
         entry.

         If no changes were made to the entry since the last
         re-initialization of the local network management
         subsystem, then this object contains a zero value."
    ::= { sdpBindPwPathEntry 2 }

sdpBindPwPathAgi  OBJECT-TYPE
    SYNTAX          TmnxVPNRouteDistinguisher
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "The value of sdpBindPwPathAgi indicates the Attachment Group
         Identifier (AGI) portion of the Generalized Id FEC element from the
         pseudowire setup for this SDP Bind."
    DEFVAL { '0000000000000000'H }
    ::= { sdpBindPwPathEntry 3 }

sdpBindPwPathSaiiGlobalId OBJECT-TYPE
    SYNTAX     TmnxMplsTpGlobalID
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathSaiiGlobalId specifies the global identifier
         of Source Attachment Individual Identifier (SAII) portion
         of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 4 }

sdpBindPwPathSaiiNodeId OBJECT-TYPE
    SYNTAX     TmnxMplsTpNodeID
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathSaiiNodeId specifies the MPLS-TP node
         identifier to the Source Attachment Individual Identifier (SAII)
         portion of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 5 }

sdpBindPwPathSaiiAcId OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathSaiiAcId specifies the attachment circuit
         identifier part of Source Attachment Individual Identifier (SAII)
         portion of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 6 }

sdpBindPwPathTaiiGlobalId OBJECT-TYPE
    SYNTAX     TmnxMplsTpGlobalID
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathTaiiGlobalId specifies the global identifier
         of Target Attachment Individual Identifier (TAII) portion
         of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 7 }

sdpBindPwPathTaiiNodeId OBJECT-TYPE
    SYNTAX     TmnxMplsTpNodeID
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathTaiiNodeId specifies the MPLS-TP node
         identifier to the Target Attachment Individual Identifier (TAII)
         portion of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 8 }

sdpBindPwPathTaiiAcId OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindPwPathTaiiAcId specifies the attachment circuit
         identifier part of Target Attachment Individual Identifier (TAII)
         portion of the Generalized Id FEC element as used by
         this SDP binding in this service."
    DEFVAL { 0 }
    ::= { sdpBindPwPathEntry 9 }

-- -------------------------
-- SDP Bind Control Channel PW Table
-- -------------------------
sdpBindCtrlChanPwTableLastChgd  OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwTableLastChgd indicates the
         sysUpTime at the time of the last modification
         of sdpBindCtrlChanPwTable.

         If no changes were made to the entry since the last
         re-initialization of the local network management subsystem,
         then this object contains a zero value."
    ::= { tnSdpObjs 52 }

sdpBindCtrlChanPwTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF SdpBindCtrlChanPwEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The sdpBindCtrlChanPwTable contains control channel Pseudo-Wire
         information per SDP binding."
    ::= { tnSdpObjs 53 }

sdpBindCtrlChanPwEntry OBJECT-TYPE
    SYNTAX          SdpBindCtrlChanPwEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The sdpBindCtrlChanPwEntry contains control channel Pseudo-Wire
         information for specific SDP binding."
    INDEX           { tnSysSwitchId, tnSvcId, sdpBindId }
    ::= { sdpBindCtrlChanPwTable 1 }

SdpBindCtrlChanPwEntry ::=
    SEQUENCE {
        sdpBindCtrlChanPwLastChanged    TimeStamp,
        sdpBindCtrlChanPwStatus         TmnxEnabledDisabled,
        sdpBindCtrlChanPwRefreshTimer   Unsigned32,
        sdpBindCtrlChanPwPeerExpired    TruthValue,
        sdpBindCtrlChanPwRequestTimer   Unsigned32,
        sdpBindCtrlChanPwRetryTimer     Unsigned32,
        sdpBindCtrlChanPwTimeoutMult    Unsigned32,
        sdpBindCtrlChanPwAck            TruthValue
    }

sdpBindCtrlChanPwLastChanged        OBJECT-TYPE
    SYNTAX          TimeStamp
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwLastChanged indicates the
         sysUpTime at the time of the last modification of this
         entry.

         If no changes were made to the entry since the last
         re-initialization of the local network management
         subsystem, then this object contains a zero value."
    ::= { sdpBindCtrlChanPwEntry 1 }

sdpBindCtrlChanPwStatus OBJECT-TYPE
    SYNTAX     TmnxEnabledDisabled
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwStatus specifies the status of
         control channel for the pseudo-wire path for this SDP binding."
    DEFVAL { disabled }
    ::= { sdpBindCtrlChanPwEntry 2 }

sdpBindCtrlChanPwRefreshTimer OBJECT-TYPE
    SYNTAX     Unsigned32 (0|10..65535)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwRefreshTimer specifies the refresh timer
         value to be used when control channel for the psuedo-wire path is
         enabled for this SDP binding."
    DEFVAL { 0 }
    ::= { sdpBindCtrlChanPwEntry 3 }

sdpBindCtrlChanPwPeerExpired OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwPeerExpired indicates whether
         sdpBindCtrlChanPwStatus was not received after 3.5 times of
         sdpBindCtrlChanPwRefreshTimer value for the pseudo-wire path for
         this SDP binding."
    ::= { sdpBindCtrlChanPwEntry 4 }


sdpBindCtrlChanPwRequestTimer OBJECT-TYPE
    SYNTAX     Unsigned32 (0|10..65535)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwRequestTimer specifies the request timer
         value to be used when control channel for the psuedo-wire path is
         enabled for this SDP binding.

         An 'inconsistentValue' error is returned if the value of
         sdpBindCtrlChanPwRequestTimer is set to non-zero when
         sdpBindCtrlChanPwRefreshTimer is set to non-zero.

         An 'inconsistentValue' error is returned if the value of
         sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
         sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is
         also set to zero."
    DEFVAL { 0 }
    ::= { sdpBindCtrlChanPwEntry 5 }

sdpBindCtrlChanPwRetryTimer OBJECT-TYPE
    SYNTAX     Unsigned32 (0|3..60)
    UNITS      "seconds"
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwRetryTimer specifies the retry timer
         value to be used for the request timer when control channel for the
         psuedo-wire path is enabled for this SDP binding.

         An 'inconsistentValue' error is returned if the value of
         sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
         sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is
         also set to zero."
    DEFVAL { 0 }
    ::= { sdpBindCtrlChanPwEntry 6 }

sdpBindCtrlChanPwTimeoutMult OBJECT-TYPE
    SYNTAX     Unsigned32 (0|3..15)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwTimeoutMult specifies the timeout
         multiplier value to be used for the retry timer to resend the request
         when control channel for the psuedo-wire path is enabled for this SDP
         binding.

         An 'inconsistentValue' error is returned if the value of
         sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
         sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is
         also set to zero."
    DEFVAL { 0 }
    ::= { sdpBindCtrlChanPwEntry 7 }

sdpBindCtrlChanPwAck OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The value of sdpBindCtrlChanPwAck specifies whether
         acknowledgement was not received after 3.5 times of
         sdpBindCtrlChanPwRefreshTimer value for the pseudo-wire path for
         this SDP binding."
    DEFVAL { false }
    ::= { sdpBindCtrlChanPwEntry 8 }

-- Conformance and Notification entries removed

 --
 -- Dummy Scalars
 --

 sdpInfoScalar1 OBJECT-TYPE
     SYNTAX      Unsigned32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
         "A dummy scalar that satisfies a SNMP get request quickly.Otherwise,
     it has to traverse the remaining MIB to get to the next applicable
          item."
     ::= { tnSdpObjs 101 }

 sdpInfoScalar2 OBJECT-TYPE
     SYNTAX      Unsigned32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
         "."
     ::= { tnSdpObjs 102 }

END
