TIMETRA-OSPF-NG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InterfaceIndex, InterfaceIndexOrZero
                                                         FROM IF-MIB
    InetAddress, InetAddressPrefixLength,
    InetAddressType,
    InetAutonomousSystemNumber
                                                         FROM INET-ADDRESS-MIB
    DesignatedRouterPriority, HelloRange,
    Metric, Status
                                                         FROM OSPF-MIB
    MODULE-COMPLIANCE, NOTIFICATION-GROUP,
    OBJECT-GROUP
                                                         FROM SNMPv2-CONF
    Counter32, Counter64, Gauge32,
    Integer32, MODULE-IDENTITY,
    NOTIFICATION-TYPE, OBJECT-TYPE,
    Unsigned32
                                                         FROM SNMPv2-SMI
    DateAndTime, DisplayString, RowStatus,
    StorageType, TEXTUAL-CONVENTION,
    TimeInterval, TimeStamp, TruthValue
                                                         FROM SNMPv2-TC
    timetraSRMIBModules, tmnxSRConfs,
    tmnxSRNotifyPrefix, tmnxSRObjs
                                                         FROM TIMETRA-GLOBAL-MIB
    TLNamedItemOrEmpty, TNamedItemOrEmpty,
    TResolveStatus,
    TmnxAddressAndPrefixAddress,
    TmnxAddressAndPrefixPrefix,
    TmnxAddressAndPrefixType,
    TmnxAdminState, TmnxEnabledDisabled,
    TmnxHigh32, TmnxIgpSCFamilyType,
    TmnxLow32, TmnxOperState,
    TmnxOspfInstance, TmnxReferenceBandwidth
                                                         FROM TIMETRA-TC-MIB
    TmnxInetCidrNextHopOwner, vRtrID
                                                         FROM TIMETRA-VRTR-MIB
    ;

timetraOspfNgMIBModule           MODULE-IDENTITY
    LAST-UPDATED "202002010000Z"
    ORGANIZATION "Nokia"
    CONTACT-INFO
        "Nokia SROS Support
         Web: http://www.nokia.com"
    DESCRIPTION
        "This document is the SNMP MIB module to manage and provision OSPF
         protocol for the Nokia SROS device.

         Copyright 2003-2018 Nokia.  All rights reserved.
         Reproduction of this document is authorized on the condition that
         the foregoing copyright notice is included.

         This SNMP MIB module (Specification) embodies Nokia's
         proprietary intellectual property.  Nokia retains
         all title and ownership in the Specification, including any
         revisions.

         Nokia grants all interested parties a non-exclusive license to use and
         distribute an unmodified copy of this Specification in connection with
         management of Nokia products, and without fee, provided this copyright
         notice and license appear on all copies.

         This Specification is supplied 'as is', and Nokia makes no warranty,
         either express or implied, as to the use, operation, condition, or
         performance of the Specification."

    REVISION    "202002010000Z"
    DESCRIPTION
        "Rev 20.0               01 Feb 2020 00:00
         20.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201904010000Z"
    DESCRIPTION
        "Rev 19.0               01 April 2019 00:00
         19.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201802010000Z"
    DESCRIPTION
        "Rev 16.0               01 Feb 2018 00:00
         16.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201701010000Z"
    DESCRIPTION
        "Rev 15.0               01 Jan 2017 00:00
         15.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201506010000Z"
    DESCRIPTION
        "Rev 14.0               01 Jun 2015 00:00
         14.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201501010000Z"
    DESCRIPTION
        "Rev 13.0               1 Jan 2015 00:00
         13.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201401010000Z"
    DESCRIPTION
        "Rev 12.0               1 Jan 2014 00:00
         12.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "201102010000Z"
    DESCRIPTION
        "Rev 9.0                1 Feb 2011 00:00
         9.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "200902280000Z"
    DESCRIPTION
        "Rev 7.0                28 Feb 2009 00:00
         7.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "200807010000Z"
    DESCRIPTION
        "Rev 6.1                01 Jul 2008 00:00
         6.1 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "200801010000Z"
    DESCRIPTION
        "Rev 6.0                01 Jan 2008 00:00
         6.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "200701010000Z"
    DESCRIPTION
        "Rev 5.0                01 Jan 2007 00:00
         5.0 release of the TIMETRA-OSPF-NG-MIB."

    REVISION    "200603270000Z"
    DESCRIPTION
        "Rev 0.1                27 Mar 2006 00:00
         Initial version of the TIMETRA-OSPF-NG-MIB."

    ::= { timetraSRMIBModules 36 }

TmnxOspfUpToRefreshIntervalTc    ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfUpToRefreshIntervalTc provides values one might
         be able to configure for variables bounded by the Refresh Interval."
    SYNTAX      Integer32 (0..1800)

TmnxOspfDeadIntRangeTc           ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfDeadIntRangeTc provides the range, in seconds, of
         the dead interval value."
    SYNTAX      Integer32 (2..65535)

TmnxOspfRouterIdTc               ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfRouterIdTc provides a 32-bit, unsigned integer
         uniquely identifying the router in the Autonomous System. To ensure
         uniqueness, this may default to the value of one of the router's IPv4
         host addresses if IPv4 is configured on the router."
    SYNTAX      Unsigned32 (0..4294967295)

TmnxOspfAreaIdTc                 ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfAreaIdTc provides an OSPF Area Identifier."
    SYNTAX      Unsigned32 (0..4294967295)

TmnxOspfIfInstIdTc               ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfIfInstIdTc provides an OSPF interface instance
         ID."
    SYNTAX      Integer32 (0..255)

TmnxOspfPreference               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfPreference provides a route preference value.
         This value will be used during the route selection algorithm."
    SYNTAX      Integer32 (1..255)

TmnxOspfAuthenticationType       ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The value TmnxOspfAuthenticationType provides the authentication
         type.  This type of authentication is only applied to interfaces with
         tmnxOspfVersion equal to 'version2'."
    SYNTAX      INTEGER {
        none           (0),
        simplePassword (1),
        md5            (2)
    }

TmnxOspfIfMD5KeyId               ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The value of TmnxOspfIfMD5KeyId provides a unique identifier for a key
         to be used for authentication on a specific OSPFv2 IP address. The
         value of 0 means that no keys are configured."
    SYNTAX      Integer32 (0..255)

TmnxOspfRestartReasonTc          ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxOspfRestartReasonTc data type is an enumerated integer that
         describes the values used to identify OSPF graceful restart reason."
    SYNTAX      INTEGER {
        unknown   (0),
        swRestart (1),
        swReload  (2),
        switchRed (3)
    }

TmnxOspfIfTypeTc                 ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxOspfIfTypeTc data type is an enumerated integer that describes
         the OSPF interface type."
    SYNTAX      INTEGER {
        unspecified       (0),
        broadcast         (1),
        nbma              (2),
        pointToPoint      (3),
        pointToMultipoint (5),
        secondary         (6)
    }

TmnxOspfShamIfMetricTc           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxOspfShamIfMetricTc data type provides a metric value for
         sham-link"
    SYNTAX      Integer32 (1..65535)

TmnxOspfLsaFilterOutTc           ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxOspfLsaFilterOutTc data type is an enumerated integer that
         describes the OSPF LSA Flooding Reduction type."
    SYNTAX      INTEGER {
        none                       (0),
        all                        (1),
        exceptOwnRtrLsa            (2),
        exceptOwnRtrLsaAndDefaults (3)
    }

TmnxSegmentRoutingId             ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION
        "The value of TmnxSegmentRoutingId provides a Segment Routing
         Identifier."
    SYNTAX      Unsigned32 (0..4294967295)

TmnxOspfSegmentRoutingRouteType  ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The TmnxOspfSegmentRoutingRouteType data type is an enumerated integer
         that describes the segment routing route type."
    SYNTAX      INTEGER {
        unspecified  (0),
        intraArea    (1),
        interArea    (3),
        external     (5),
        nssaExternal (7)
    }

tmnxOspfObjects                  OBJECT IDENTIFIER ::= { tmnxSRObjs 36 }

tmnxOspfScalars                  OBJECT IDENTIFIER ::= { tmnxOspfObjects 1 }

tmnxOspfGeneralEntries           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfGeneralEntries indicates the number of row
         entries in the tmnxOspfGeneralTable.  This is the number of
         OSPF instances currently configured."
    ::= { tmnxOspfScalars 1 }

tmnxOspfGeneralTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfGeneralEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfGeneralTable contains information describing the
         configured parameters and cumulative statistics of an OSPF instance's
         attached areas."
    ::= { tmnxOspfObjects 2 }

tmnxOspfGeneralEntry             OBJECT-TYPE
    SYNTAX      TmnxOspfGeneralEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfGeneralEntry contains information describing the
         configured parameters and cumulative statistics of one of an
         OSPF instance's attached areas.  An OSPF row entry is created
         or deleted in this table by setting the tmnxOspfRowStatus object."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance
    }
    ::= { tmnxOspfGeneralTable 1 }

TmnxOspfGeneralEntry             ::= SEQUENCE
{
    tmnxOspfVersion                  INTEGER,
    tmnxOspfInstance                 TmnxOspfInstance,
    tmnxOspfGeneralLastChanged       TimeStamp,
    tmnxOspfRouterId                 TmnxOspfRouterIdTc,
    tmnxOspfAdminState               Status,
    tmnxOspfASBdrRtrStatus           TruthValue,
    tmnxOspfRFC1583Compatibility     TruthValue,
    tmnxOspfExtLsdbLimit             Integer32,
    tmnxOspfMulticastExtensions      BITS,
    tmnxOspfExitOverflowInterval     Unsigned32,
    tmnxOspfDemandExtensions         TruthValue,
    tmnxOspfReferenceBandwidth       TmnxReferenceBandwidth,
    tmnxOspfStrictLsaChecking        TruthValue,
    tmnxOspfRestartSupport           INTEGER,
    tmnxOspfRestartInterval          TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfPreference               TmnxOspfPreference,
    tmnxOspfExternalPreference       TmnxOspfPreference,
    tmnxOspfExportPolicy1            TNamedItemOrEmpty,
    tmnxOspfExportPolicy2            TNamedItemOrEmpty,
    tmnxOspfExportPolicy3            TNamedItemOrEmpty,
    tmnxOspfExportPolicy4            TNamedItemOrEmpty,
    tmnxOspfExportPolicy5            TNamedItemOrEmpty,
    tmnxOspfManualSpfTrigger         INTEGER,
    tmnxOspfOverloadAdmState         Status,
    tmnxOspfOverloadInterval         Unsigned32,
    tmnxOspfBootOverloadAdmState     INTEGER,
    tmnxOspfBootOverloadInterval     Unsigned32,
    tmnxOspfOverloadStubs            TruthValue,
    tmnxOspfSpfMaxWait               Unsigned32,
    tmnxOspfSpfInitialWait           Unsigned32,
    tmnxOspfSpfSecondWait            Unsigned32,
    tmnxOspfLsaGenMaxWait            Unsigned32,
    tmnxOspfLsaGenInitialWait        Unsigned32,
    tmnxOspfLsaGenSecondWait         Unsigned32,
    tmnxOspfLsaArrivalWait           Unsigned32,
    tmnxOspfTESupport                TruthValue,
    tmnxOspfUnicastImport            TruthValue,
    tmnxOspfMulticastImport          TruthValue,
    tmnxOspfGREnable                 TruthValue,
    tmnxOspfGRHelperMode             TruthValue,
    tmnxOspfRowStatus                RowStatus,
    tmnxOspfAsbrDomainId             Integer32,
    tmnxOspfIgnoreDNBit              TruthValue,
    tmnxOspfSuppressDNBit            TruthValue,
    tmnxOspfLdpSyncAdminState        Status,
    tmnxOspfVpnDomainType            INTEGER,
    tmnxOspfVpnDomainId              OCTET STRING,
    tmnxOspfVpnTag                   Unsigned32,
    tmnxOspfSuperBackBone            TruthValue,
    tmnxOspfLdpOverRsvp              TmnxEnabledDisabled,
    tmnxOspfExportLimit              Unsigned32,
    tmnxOspfExportLimitLogPercent    Unsigned32,
    tmnxOspfRsvpShortcut             TruthValue,
    tmnxOspfAdvertiseTunnelLink      TruthValue,
    tmnxOspfImportPolicy1            TNamedItemOrEmpty,
    tmnxOspfImportPolicy2            TNamedItemOrEmpty,
    tmnxOspfImportPolicy3            TNamedItemOrEmpty,
    tmnxOspfImportPolicy4            TNamedItemOrEmpty,
    tmnxOspfImportPolicy5            TNamedItemOrEmpty,
    tmnxOspfLoopfreeAlternate        TruthValue,
    tmnxOspfLsaAccumulate            Unsigned32,
    tmnxOspfRedistDelay              Unsigned32,
    tmnxOspfIncrSpfWait              Unsigned32,
    tmnxOspfOverloadInclExt2         TruthValue
}

tmnxOspfVersion                  OBJECT-TYPE
    SYNTAX      INTEGER {
        version2 (2),
        version3 (3)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVersion specifies the version number of OSPF
         supported by this OSPF instance.  The version number of OSPF for
         IPv6 is 3."
    ::= { tmnxOspfGeneralEntry 1 }

tmnxOspfInstance                 OBJECT-TYPE
    SYNTAX      TmnxOspfInstance
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfInstance is a unique integer that identifies a
         specific instance of a version of the OSPF protocol running in the
         router instance specified by the vRtrID index."
    ::= { tmnxOspfGeneralEntry 2 }

tmnxOspfGeneralLastChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfGeneralLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfGeneralEntry 4 }

tmnxOspfRouterId                 OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRouterId specifies a 32-bit integer uniquely
         identifying the router in the Autonomous System.  By convention
         to ensure uniqueness, this may default to the value of one of the
         router's IPv4 host addresses, represented as a 32-bit unsigned
         integer, if IPv4 is configured on the router."
    ::= { tmnxOspfGeneralEntry 5 }

tmnxOspfAdminState               OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdminState specifies the desired administrative
         status of this instance of OSPF in the router. The value 'enabled'
         activates this instance of the OSPF protocol. The value' disabled'
         stops it."
    ::= { tmnxOspfGeneralEntry 6 }

tmnxOspfASBdrRtrStatus           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfASBdrRtrStatus specifies whether this router is
         configured as an Autonomous System border router."
    REFERENCE
        "OSPF Version 2, Section 3.3 Classification of routers"
    ::= { tmnxOspfGeneralEntry 7 }

tmnxOspfRFC1583Compatibility     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRFC1583Compatibility indicates the metrics used
         to choose among multiple AS-external-LSAs. When
         tmnxOspfRFC1583Compatibility is set to 'true', only cost will be used
         when choosing among multiple AS-external-LSAs advertising the same
         destination. When tmnxOspfRFC1583Compatibility is set to 'false',
         preference will be driven first by the type of path using cost only to
         break ties.

         This object is valid only when tmnxOspfVersion is 'version2'."
    REFERENCE
        "OSPF Version 2, Section 16.4.1 External path preferences"
    ::= { tmnxOspfGeneralEntry 8 }

tmnxOspfExtLsdbLimit             OBJECT-TYPE
    SYNTAX      Integer32 (-1..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExtLsdbLimit specifies the maximum number of
         non-default AS-external-LSAs entries that can be stored in the
         link-state database. If the value is -1, then there is no limit.

         When the number of non-default AS-external-LSAs in a router's
         link-state database reaches tmnxOspfExtLsdbLimit, the
         router enters Overflow state. The router never holds more than
         tmnxOspfExtLsdbLimit non-default AS-external-LSAs in its
         database.  tmnxOspfExtLsdbLimit MUST be set identically in
         all routers attached to the OSPF backbone and/or any regular
         OSPF area. (i.e., OSPF stub areas and NSSAs are excluded)."
    ::= { tmnxOspfGeneralEntry 9 }

tmnxOspfMulticastExtensions      OBJECT-TYPE
    SYNTAX      BITS {
        intraAreaMulticast (0),
        interAreaMulticast (1),
        interAsMulticast   (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMulticastExtensions specifies a Bit Mask
         indicating whether the router is forwarding IPv6 multicast datagrams
         based on the algorithms defined in the Multicast Extensions to OSPF.

         When the intraAreaMulticast bit is set, it indicates that the router
         can forward IPv6 multicast datagrams in the router's directly attached
         areas (called intra-area multicast routing).

         When the interAreaMulticast bit is set, it indicates that the router
         can forward IPv6 multicast datagrams between OSPFv3 areas (called
         inter-area multicast routing).

         When the interAsMulticast bit is set, it indicates that the router can
         forward IPv6 multicast datagrams between Autonomous Systems (called
         inter-AS multicast routing).

         Only certain combinations of bit settings are allowed, namely:
            - All bits cleared (no multicasting)
            - intraAreaMulticast only,
            - intraAreaMulticast and interAreaMulticast,
            - intraAreaMulticast and interAsMulticast
            - intraAreaMulticast, interAreaMulticast and interAsMulticast
         By default, all bits are cleared."
    DEFVAL      { {} }
    ::= { tmnxOspfGeneralEntry 10 }

tmnxOspfExitOverflowInterval     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExitOverflowInterval specifies the number of
         seconds that, after entering Overflow State, a router will attempt
         to leave Overflow State. This allows the router to again originate
         non-default  AS-external-LSAs. When set to 0, the router will not
         leave Overflow state until restarted."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 11 }

tmnxOspfDemandExtensions         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfDemandExtensions specifies the router's support
         for demand routing."
    REFERENCE
        "OSPF Version 2, Appendix on Demand Routing"
    ::= { tmnxOspfGeneralEntry 12 }

tmnxOspfReferenceBandwidth       OBJECT-TYPE
    SYNTAX      TmnxReferenceBandwidth (1..4000000000)
    UNITS       "1000 bits per second"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfReferenceBandwidth specifies default
         metrics to any OSPF interface.  The cost metric is calculated
         by dividing the value of tmnxOspfReferenceBandwidth by the bandwidth
         of the interface.  The default value of 100,000,000 Kbps or
         100 Gps provides a 10-Mbs link with a cost of 10000, a 100-Mbs
         link with a cost of 1000, a 1-Gbs link with a cost of 100 and
         10-Gbs link with a cost of 10.  To override this default cost
         on a particular interface, set tmnxOspfIfCfgMetric for that
         interface.

         The maximum value of 4,000,000,000 Kbps amounts to 4 Terabit per
         second.

         To configure higher reference bandwidth values, please use the newer
         objects tmnxOspfReferenceBandwidthU64Hi and
         tmnxOspfReferenceBandwidthU64Lo in tmnxOspfGeneralExTable.

         In case a reference bandwidth is configured in tmnxOspfGeneralExTable
         that exceeds the maximum of the tmnxOspfReferenceBandwidth range, this
         object will return the maximum value. The real reference bandwidth can
         be found in tmnxOspfReferenceBandwidthU64Hi and
         tmnxOspfReferenceBandwidthU64Lo."
    DEFVAL      { 100000000 }
    ::= { tmnxOspfGeneralEntry 13 }

tmnxOspfStrictLsaChecking        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfStrictLsaChecking specifies whether or not to
         perform strict LSA checking during OSPF graceful restart."
    DEFVAL      { true }
    ::= { tmnxOspfGeneralEntry 14 }

tmnxOspfRestartSupport           OBJECT-TYPE
    SYNTAX      INTEGER {
        none                (1),
        plannedOnly         (2),
        plannedAndUnplanned (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRestartSupport specifies the router's support
         for OSPF graceful restart.  Options include: no restart support,
         only planned restarts or both planned and unplanned restarts."
    ::= { tmnxOspfGeneralEntry 15 }

tmnxOspfRestartInterval          OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRestartInterval specifies the configured OSPF
         graceful restart timeout interval."
    ::= { tmnxOspfGeneralEntry 16 }

tmnxOspfPreference               OBJECT-TYPE
    SYNTAX      TmnxOspfPreference
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPreference specifies the route preference for
         OSPF internal routes."
    DEFVAL      { 10 }
    ::= { tmnxOspfGeneralEntry 17 }

tmnxOspfExternalPreference       OBJECT-TYPE
    SYNTAX      TmnxOspfPreference
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExternalPreference specifies the route preference
         for OSPF external routes."
    DEFVAL      { 150 }
    ::= { tmnxOspfGeneralEntry 18 }

tmnxOspfExportPolicy1            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportPolicy1 specifies the name of the 1st
         Export policy to be used for determining which routes are exported
         from the routing table to OSPF."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 19 }

tmnxOspfExportPolicy2            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportPolicy2 specifies the name of the 2nd
         Export policy to be used for determining which routes are exported
         from the routing table to OSPF."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 20 }

tmnxOspfExportPolicy3            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportPolicy3 specifies the name of the 3rd
         Export policy to be used for determining which routes are exported
         from the routing table to OSPF."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 21 }

tmnxOspfExportPolicy4            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportPolicy4 specifies the name of the 4rd
         Export policy to be used for determining which routes are exported
         from the routing table to OSPF."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 22 }

tmnxOspfExportPolicy5            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportPolicy5 specifies the name of the 5th
         Export policy to be used for determining which routes are exported
         from the routing table to OSPF."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 23 }

tmnxOspfManualSpfTrigger         OBJECT-TYPE
    SYNTAX      INTEGER {
        noAction        (1),
        runTotalSpf     (2),
        runExternalsSpf (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfManualSpfTrigger specifies a manual Dijkstra SPF
         calculation trigger.

         When tmnxOspfManualSpfTrigger is set to 'runTotalSpf' a normal
         Dijkstra SPF calculation is performed.

         When tmnxOspfManualSpfTrigger is set to 'runExternalsSpf', only the AS
         External LSAs are recalculated.

         GETs and GETNEXTs on this variable return 'noAction'."
    DEFVAL      { noAction }
    ::= { tmnxOspfGeneralEntry 24 }

tmnxOspfOverloadAdmState         OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadAdmState specifies a command used to
         manually make the system go in or out of overload state. Whenever this
         value is set, tmnxOspfOverloadInterval is reset to back to default."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralEntry 25 }

tmnxOspfOverloadInterval         OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadInterval specifies how long (in seconds)
         OSPF should remain in overload state. This is reset to default when
         tmnxOspfOverloadAdmState is modified. The value of 0 implies that the
         system is indefinitely in overload."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 26 }

tmnxOspfBootOverloadAdmState     OBJECT-TYPE
    SYNTAX      INTEGER {
        disabled (1),
        enabled  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBootOverloadAdmState specifies the desired
         overload state that should be applied after boot Whenever this value
         is set, tmnxOspfBootOverloadInterval is reset to back to default."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralEntry 27 }

tmnxOspfBootOverloadInterval     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBootOverloadInterval specifies the configured
         value for OSPF for which it should remain in overload state on
         boot-up. This is reset to default when tmnxOspfBootOverloadAdmState
         is modified.  The value of 0 implies that the system is
         indefinitely in overload."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 28 }

tmnxOspfOverloadStubs            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadStubs specifies if the OSPF stub networks
         should be advertised with a maximum metric value when the system goes
         into overload state for any reason. If the value is 'true', the system
         uses the maximum metric value."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 29 }

tmnxOspfSpfMaxWait               OBJECT-TYPE
    SYNTAX      Unsigned32 (10..120000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSpfMaxWait defines the maximum interval between
         two consecutive full SPF calculations."
    DEFVAL      { 10000 }
    ::= { tmnxOspfGeneralEntry 30 }

tmnxOspfSpfInitialWait           OBJECT-TYPE
    SYNTAX      Unsigned32 (10..100000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSpfInitialWait defines the hold down time before
         a full SPF calculation delay after a topology change."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 31 }

tmnxOspfSpfSecondWait            OBJECT-TYPE
    SYNTAX      Unsigned32 (10..100000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSpfSecondWait defines the hold time between the
         first and second SPF calculation. Subsequent SPF runs will occur at
         exponentially increasing intervals of the tmnxOspfSpfSecondWait value
         i.e., if tmnxOspfSpfSecondWait is 1000, then the next SPF triggered by
         an event during this interval will run after 2000 msec, and the
         subsequent one at 4000 msec, etc. until it is capped off at
         tmnxOspfSpfMaxWait value. If this is configured as zero, there will be
         no exponential backoff.

         The SPF interval will stay at tmnxOspfSpfMaxWait value until there are
         no more SPF runs scheduled in that interval. After a full interval
         without any SPF runs, the SPF interval will drop back to
         tmnxOspfSpfInitialWait."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 32 }

tmnxOspfLsaGenMaxWait            OBJECT-TYPE
    SYNTAX      Unsigned32 (10..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLsaGenMaxWait defines the maximum interval
         between two consecutive updates of a self generated LSA due to any
         event. This is a way to manipulate the 'MinLSInterval'."
    DEFVAL      { 5000 }
    ::= { tmnxOspfGeneralEntry 33 }

tmnxOspfLsaGenInitialWait        OBJECT-TYPE
    SYNTAX      Unsigned32 (10..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLsaGenInitialWait defines the initial LSA
         generation delay after an event that causes the LSA generation or
         update."
    DEFVAL      { 5000 }
    ::= { tmnxOspfGeneralEntry 34 }

tmnxOspfLsaGenSecondWait         OBJECT-TYPE
    SYNTAX      Unsigned32 (10..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLsaGenSecondWait defines the hold time between
         the first and second LSA generation.

         Subsequent updates of that LSA will occur at exponentially increasing
         intervals of tmnxOspfLsaGenSecondWait value i.e., if
         tmnxOspfLsaGenSecondWait is 1000, then the next LS update triggered
         during this interval will be processed after 2000 msec, and the
         subsequent one at 4000 msec, etc. until it is capped off at
         tmnxOspfLsaGenMaxWait. If this is configured as zero, there will be no
         exponential backoff.

         The LSA generate interval will stay at tmnxOspfLsaGenMaxWait value
         until there are no more updates of that LSA triggered in that
         interval. After a full interval without any updates of that LSA, the
         LSA generate interval will be reset back to tmnxOspfLsaGenInitialWait."
    DEFVAL      { 5000 }
    ::= { tmnxOspfGeneralEntry 35 }

tmnxOspfLsaArrivalWait           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLsaArrivalWait defines the minimum interval
         between two consecutive updates of an LSA received from any neighbor.
         Any LSA update received before that is discarded. This is a way to
         manipulate the 'MinLSArrival'."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 36 }

tmnxOspfTESupport                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfTESupport specifies whether or not TEs
         are supported by this instance of OSPF.  When it has a value
         of 'true', TEs are supported."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 37 }

tmnxOspfUnicastImport            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfUnicastImport specifies whether OSPF protocol
         will submit routes into the unicast Route Table Manage(RTM).

         When tmnxOspfUnicastImport has a value of 'true', the OSPF protocol
         submits routes into the unicast RTM, and when it has a value of
         'false', it does not."
    DEFVAL      { true }
    ::= { tmnxOspfGeneralEntry 38 }

tmnxOspfMulticastImport          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMulticastImport specifies whether OSPF protocol
         will submit routes into the multicast Reverse Path Forwarding(RPF)
         Route Table Manage(RTM).

         When tmnxOspfMulticastImport has a value of 'true', OSPF protocol
         submits routes into the multicast RPF RTM and when it has a value of
         'false', it does not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 39 }

tmnxOspfGREnable                 OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfGREnable specifies whether the graceful restart
         is enabled or disabled for this instance of OSPF on the router.

         When tmnxOspfGREnable has a value of 'true' graceful
         restart capabilities are enabled.  When it has a value
         of 'false' the graceful restart is disabled."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 40 }

tmnxOspfGRHelperMode             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfGRHelperMode specifies whether the graceful
         restart helper mode is enabled or disabled for this instance of OSPF
         on the router. tmnxOspfGRHelperMode is valid only if the value of
         tmnxOspfGREnable is 'true'.

         When tmnxOspfGRHelperMode has a value of 'true' graceful
         restart helper capabilities are enabled.  When it has a value
         of 'false' the graceful restart helper capabilities are disabled."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 41 }

tmnxOspfRowStatus                OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The tmnxOspfRowStatus variable is used for creation and deletion of
         tmnxOspfGeneralTable row entries."
    ::= { tmnxOspfGeneralEntry 42 }

tmnxOspfAsbrDomainId             OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..31)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsbrDomainId specifies the domain-id associated
         with this instance of OSPF on the router.

         If no value is specified for tmnxOspfAsbrDomainId, it is set to -1."
    DEFVAL      { -1 }
    ::= { tmnxOspfGeneralEntry 43 }

tmnxOspfIgnoreDNBit              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIgnoreDNBit specifies whether to ignore the DN
         bit for OSPF LSA packets for this instance of OSPF on the router.

         When tmnxOspfIgnoreDNBit has a value of 'true' the DN bit for OSPF LSA
         packets will be ignored. When it has a value of 'false' the DN bit
         will not be ignored for OSPF LSA packets."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 44 }

tmnxOspfSuppressDNBit            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSuppressDNBit specifies whether to suppress the
         setting of the DN bit for OSPF LSA packets generated by this instance
         of OSPF on the router.

         When tmnxOspfSuppressDNBit has a value of 'true' the DN bit for OSPF
         LSA packets generated by this instance of the OSPF router will not be
         set. When it has a value of 'false' this instance of the OSPF router
         will follow the normal procedure to determine whether to set the DN
         bit."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 45 }

tmnxOspfLdpSyncAdminState        OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLdpSyncAdminState specifies whether the IGP-LDP
         synchronization feature is enabled or disabled on all interfaces
         participating in the OSPF routing protocol.

         When the value is set to 'disabled', IGP immediately advertises the
         actual value of the link cost for all interfaces which have the
         IGP-LDP synchronization enabled if the currently advertised cost is
         different. IGP-LDP synchronization for all interfaces is then
         disabled."
    DEFVAL      { enabled }
    ::= { tmnxOspfGeneralEntry 46 }

tmnxOspfVpnDomainType            OBJECT-TYPE
    SYNTAX      INTEGER {
        type0000 (0),
        type0005 (5),
        type0105 (261),
        type0205 (517),
        type8005 (32773)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVpnDomainType specifies type of the extended
         community attribute exchanged using BGP to carry the OSPF VPN Domain
         ID. This object applies to VPRN instances of OSPF only. An attempt to
         modify the value of this object will result in an 'inconsistentValue'
         error when the vRtrID index for this row entry is not a VPRN instance.

         When the value is set to 'type0000', vpn-domain functionality is
         disabled."
    DEFVAL      { type0000 }
    ::= { tmnxOspfGeneralEntry 47 }

tmnxOspfVpnDomainId              OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (6))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVpnDomainId specifies the OSPF VPN Domain. This
         is exchanged using BGP in the extended community attribute associated
         with a prefix. This object applies to VPRN instances of OSPF only. An
         attempt to modify the value of this object will result in an
         'inconsistentValue' error when the vRtrID index for this row entry is
         not a VPRN instance."
    DEFVAL      { '000000000000'H }
    ::= { tmnxOspfGeneralEntry 48 }

tmnxOspfVpnTag                   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVpnTag specifies the route tag for an OSPF VPN on
         a PE router. This field is set in the tag field of the OSPF external
         LSAs generated by the PE. This is mainly used to prevent routing
         loops. This object applies to VPRN instances of OSPF only. An attempt
         to modify the value of this object will result in an
         'inconsistentValue' error when the vRtrID index for this row entry is
         not a VPRN instance."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 49 }

tmnxOspfSuperBackBone            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSuperBackBone specifies whether CE-PE
         functionality is required or not. tmnxOspfSuperBackBone indicates the
         type of the LSA generated as a result of routes redistributed into
         OSPF.

         When the value is set to 'true' the redistributed routes are injected
         as summary, external or NSSA LSAs.

         When the value is set to 'false' the redistributed routes are injected
         as either external or NSSA LSAs only."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 50 }

tmnxOspfLdpOverRsvp              OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLdpOverRsvp specifies whether LDP-over-RSVP
         feature is enabled or disabled for a specific OSPF instance.

         When tmnxOspfLdpOverRsvp is enabled, OSPF will select the endpoint
         that is closest to the destination for further selection of
         LDP-over-RSVP tunnels to that endpoint."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralEntry 51 }

tmnxOspfExportLimit              OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportLimit specifies the maximum number of
         routes or prefixes that can be exported into OSPF or OSPF3 from the
         route table.

         A value of 0 indicates that the export limit for routes or prefixes
         has been disabled."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 52 }

tmnxOspfExportLimitLogPercent    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExportLimitLogPercent specifies the percentage of
         the export-limit, at which a warning log message and SNMP notification
         would be sent. This would only be a warning and additional routes will
         be learned up to 100% of tmnxOspfExportLimit.

         A value of 0 indicates that tmnxOspfExportLimitLogPercent is disabled
         and no log message or SNMP notification would be sent."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralEntry 53 }

tmnxOspfRsvpShortcut             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfRsvpShortcut specifies whether RSVP-TE shortcut
         for resolving IGP routes has been enabled or disabled for OSPF.

         When the value of tmnxOspfRsvpShortcut is set to true RSVP-TE shortcut
         is enabled and when tmnxOspfRsvpShortcut is set to false RSVP-TE
         shortcut is disabled for OSPF."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 54 }

tmnxOspfAdvertiseTunnelLink      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvertiseTunnelLink specifies whether
         advertisement of LSP shortcuts into IGP has been enabled or disabled
         for OSPF.

         When the value of tmnxOspfAdvertiseTunnelLink is set to true, LSP
         shortcut advertisement into IGP is enabled and when
         tmnxOspfAdvertiseTunnelLink is set to false, LSP shortcut
         advertisement into IGP is disabled."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 55 }

tmnxOspfImportPolicy1            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportPolicy1 specifies the name of the 1st
         import policy to be used for determining which routes are imported
         from OSPF to the routing table."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 56 }

tmnxOspfImportPolicy2            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportPolicy2 specifies the name of the 2nd
         import policy to be used for determining which routes are imported
         from OSPF to the routing table."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 57 }

tmnxOspfImportPolicy3            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportPolicy3 specifies the name of the 3rd
         import policy to be used for determining which routes are imported
         from OSPF to the routing table."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 58 }

tmnxOspfImportPolicy4            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportPolicy4 specifies the name of the 4rd
         import policy to be used for determining which routes are imported
         from OSPF to the routing table."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 59 }

tmnxOspfImportPolicy5            OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportPolicy5 specifies the name of the 5thimport
         policy to be used for determining which routes are imported from OSPF
         to the routing table."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralEntry 60 }

tmnxOspfLoopfreeAlternate        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLoopfreeAlternate specifies whether to enable or
         disable IP fast reroute capability for OSPF.

         When the value of tmnxOspfLoopfreeAlternate is set to 'true' IP fast
         reroute capability for OSPF is enabled and when
         tmnxOspfLoopfreeAlternate is set to 'false' IP fast reroute capability
         for OSPF is disabled."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 61 }

tmnxOspfLsaAccumulate            OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLsaAccumulate defines the accumulation delay for
         multiple LSAs, so OSPF messages can be sent as efficiently as
         possible.

         Shorting this delay can speed up the advertisement of LSAs to OSPF
         neighbors but may increase the number of OSPF messages sent."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 62 }

tmnxOspfRedistDelay              OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRedistDelay defines the internal OSPF hold down
         timer for external routes being redistributed into OSPF.

         Shorting this delay can speed up the advertisement of external routes
         into OSPF but can result in additional OSPF messages if that source
         route is not yet stable."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 63 }

tmnxOspfIncrSpfWait              OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIncrSpfWait defines the internal OSPF delay
         before an incremental SPF calculation is performed."
    DEFVAL      { 1000 }
    ::= { tmnxOspfGeneralEntry 64 }

tmnxOspfOverloadInclExt2         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadInclExt2 specifies if the OSPF external
         prefixes with metric-type 2, should be advertised with a maximum
         metric value when the system goes into overload state for any reason.
         If the value is 'true', the system uses the maximum metric value."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralEntry 65 }

tmnxOspfStatusTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfStatusTable provides an extension of the
         tmnxOspfGeneralTable for OSPF process statuses."
    ::= { tmnxOspfObjects 3 }

tmnxOspfStatusEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfStatusTable represents additional
         columns for status objects for an OSPF instance."
    AUGMENTS    { tmnxOspfGeneralEntry }
    ::= { tmnxOspfStatusTable 1 }

TmnxOspfStatusEntry              ::= SEQUENCE
{
    tmnxOspfAreaBdrRtrStatus         TruthValue,
    tmnxOspfBackBoneRouter           TruthValue,
    tmnxOspfStubRouterSupport        TruthValue,
    tmnxOspfAsScopeLsaCount          Gauge32,
    tmnxOspfAsScopeLsaCksumSum       Integer32,
    tmnxOspfAsScopeUnkLsaCount       Gauge32,
    tmnxOspfAsScopeUnkLsaCksumSum    Integer32,
    tmnxOspfExternLsaCount           Gauge32,
    tmnxOspfExternLsaCksumSum        Integer32,
    tmnxOspfOpaqueLsaSupport         TruthValue,
    tmnxOspfRestartStatus            INTEGER,
    tmnxOspfRestartAge               TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfRestartExitRc            INTEGER,
    tmnxOspfDiscontinuityTime        TimeStamp,
    tmnxOspfLastEnabledTime          TimeStamp,
    tmnxOspfLastOvrflwEnteredTime    TimeStamp,
    tmnxOspfLastOverflowExitTime     TimeStamp,
    tmnxOspfInOverflowState          TruthValue,
    tmnxOspfOverloadOperState        INTEGER,
    tmnxOspfOverloadRemInterval      TimeInterval,
    tmnxOspfLastOverloadEntrdTime    TimeStamp,
    tmnxOspfLastOverloadExitTime     TimeStamp,
    tmnxOspfLastOverloadEnterCode    INTEGER,
    tmnxOspfLastOverloadExitCode     INTEGER,
    tmnxOspfLastExtSpfRunTime        TimeStamp,
    tmnxOspfLastFullSpfRunTime       TimeStamp,
    tmnxOspfLastFullSpfInterval      TimeInterval,
    tmnxOspfMaxSpfRunInterval        TimeInterval,
    tmnxOspfMinSpfRunInterval        TimeInterval,
    tmnxOspfAvgSpfRunInterval        TimeInterval,
    tmnxOspfExtSpfRunInterval        TimeInterval,
    tmnxOspfRoutesSubmitted          Gauge32,
    tmnxOspfOperRouterId             TmnxOspfRouterIdTc,
    tmnxOspfTotalExportedRoutes      Gauge32,
    tmnxOspfLastLfaSpfRunTime        TimeStamp,
    tmnxOspfLdpOverRsvpStatus        TmnxEnabledDisabled,
    tmnxOspfRsvpShortcutStatus       TruthValue,
    tmnxOspfAdvertiseTunlLinkStatus  TruthValue,
    tmnxOspfOvldLsaLimitRemInterval  TimeInterval,
    tmnxOspfDbAsn                    InetAutonomousSystemNumber,
    tmnxOspfOperState                TmnxEnabledDisabled
}

tmnxOspfAreaBdrRtrStatus         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaBdrRtrStatus indicates whether this router is
         an area border router."
    REFERENCE
        "OSPF Version 2, Section 3 Splitting the AS into Areas"
    ::= { tmnxOspfStatusEntry 1 }

tmnxOspfBackBoneRouter           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBackBoneRouter indicates whether or not this
         router is configured as an OSPF back bone router."
    ::= { tmnxOspfStatusEntry 2 }

tmnxOspfStubRouterSupport        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfStubRouterSupport indicates the router's support
         for stub router functionality."
    REFERENCE
        "OSPF Stub Router Advertisement"
    ::= { tmnxOspfStatusEntry 3 }

tmnxOspfAsScopeLsaCount          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsScopeLsaCount indicates the number of AS-Scope
         (e.g. AS-External) link state advertisements in the link-state
         database."
    ::= { tmnxOspfStatusEntry 4 }

tmnxOspfAsScopeLsaCksumSum       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsScopeLsaCksumSum indicates the 32-bit
         unsigned sum of the LS checksums of the AS-scoped link-state
         advertisements contained in the link-state database.  This sum
         can be used to determine if there has been a change in a router's
         link-state database, and to compare the link-state database of two
         routers."
    ::= { tmnxOspfStatusEntry 5 }

tmnxOspfAsScopeUnkLsaCount       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsScopeUnkLsaCount indicates the number of
         unknown AS-Scope (e.g. AS-External) link-state advertisements in the
         link-state database."
    ::= { tmnxOspfStatusEntry 6 }

tmnxOspfAsScopeUnkLsaCksumSum    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsScopeUnkLsaCksumSum indicates the 32-bit
         unsigned sum of the LS checksums of the unknown AS-scoped link-state
         advertisements contained in the link-state database. This sum can be
         used to determine if there has been a change in a router's link-state
         database, and to compare the link-state database of two routers."
    ::= { tmnxOspfStatusEntry 7 }

tmnxOspfExternLsaCount           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExternLsaCount indicates the number of External
         LSAs (LS type 0x4005) in the link-state database"
    ::= { tmnxOspfStatusEntry 8 }

tmnxOspfExternLsaCksumSum        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExternLsaCksumSum indicates the 32-bit
         unsigned sum of the LS checksums of the external link-state
         advertisements contained in the link-state database. This sum
         can be used to determine if there has been a change in a router's
         link state  database, and to compare the link-state database of
         two routers."
    ::= { tmnxOspfStatusEntry 9 }

tmnxOspfOpaqueLsaSupport         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOpaqueLsaSupport indicates the router's support
         for Opaque LSA types.

         This object is valid only when tmnxOspfVersion is 'version2'."
    REFERENCE
        "The OSPF Opaque LSA Option"
    ::= { tmnxOspfStatusEntry 10 }

tmnxOspfRestartStatus            OBJECT-TYPE
    SYNTAX      INTEGER {
        notRestarting    (1),
        plannedRestart   (2),
        unplannedRestart (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRestartStatus indicates the current status of
         OSPF graceful restart capability."
    ::= { tmnxOspfStatusEntry 11 }

tmnxOspfRestartAge               OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRestartAge indicates the remaining time in the
         current OSPF graceful restart interval."
    ::= { tmnxOspfStatusEntry 12 }

tmnxOspfRestartExitRc            OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        inProgress      (2),
        completed       (3),
        timedOut        (4),
        topologyChanged (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRestartExitRc indicates the outcome of the last
         attempt at a Graceful restart.

              none (1)              no restart has yet been attempted.
              inProgress (2)        a restart attempt is currently underway.
              completed (3)         the last restart completed successfully.
              timedOut (4)          the last restart timed out.
              topologyChanged (5)   the last restart was aborted due to
                                    a topology change."
    ::= { tmnxOspfStatusEntry 13 }

tmnxOspfDiscontinuityTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of sysUpTime on the most recent occasion at which any one of
         this MIB's counters suffered a discontinuity.

         If no such discontinuities have occurred since the last
         reinitialization of the local management subsystem, then this object
         contains a zero value."
    ::= { tmnxOspfStatusEntry 14 }

tmnxOspfLastEnabledTime          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastEnabledTime indicates the value of sysUpTime
         when tmnxOspfAdminState was last set to 'enabled'. When
         tmnxOspfAdminState is set to 'disabled', the OSPF counters are
         stopped; when tmnxOspfAdminState is reset to 'enabled', the counters
         are reset to zero."
    ::= { tmnxOspfStatusEntry 15 }

tmnxOspfLastOvrflwEnteredTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOvrflwEnteredTime indicates the value of
         sysUpTime the last time we entered overflow state. This overflow state
         occurs when the number of non-default AS-external-LSAs entries exceed
         the link-state database capability."
    ::= { tmnxOspfStatusEntry 16 }

tmnxOspfLastOverflowExitTime     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOverflowExitTime indicates the value of
         sysUpTime the last time we exited overflow state. This overflow state
         occurs when the number of non-default AS-external-LSAs entries exceed
         the link-state database capability."
    ::= { tmnxOspfStatusEntry 17 }

tmnxOspfInOverflowState          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfInOverflowState indicates the current overflow
         state (true/False). This overflow state occurs when the number of
         non-default AS-external-LSAs entries exceed the link-state database
         capability."
    ::= { tmnxOspfStatusEntry 18 }

tmnxOspfOverloadOperState        OBJECT-TYPE
    SYNTAX      INTEGER {
        overload   (1),
        noOverload (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadOperState indicates whether or not the
         OSPF application is presently in overload state or not."
    ::= { tmnxOspfStatusEntry 19 }

tmnxOspfOverloadRemInterval      OBJECT-TYPE
    SYNTAX      TimeInterval (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadRemInterval indicates the time for which
         the system will be in overload state if OSPF is in overload state.

         The value of 0 implies that the system is indefinitely in overload
         state."
    ::= { tmnxOspfStatusEntry 20 }

tmnxOspfLastOverloadEntrdTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOverloadEntrdTime indicates the time at which
         the system last went into overload state."
    ::= { tmnxOspfStatusEntry 21 }

tmnxOspfLastOverloadExitTime     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOverloadExitTime indicates the time at which
         the system last came out of overload state."
    ::= { tmnxOspfStatusEntry 22 }

tmnxOspfLastOverloadEnterCode    OBJECT-TYPE
    SYNTAX      INTEGER {
        none           (1),
        spfFailed      (2),
        bootOverload   (3),
        manualOverload (4),
        singleSfm      (5),
        fibAddFail     (6),
        rtmAddFail     (7),
        rtrAdvLsaLimit (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOverloadEnterCode indicates the condition
         which caused OSPF to get into overload."
    ::= { tmnxOspfStatusEntry 23 }

tmnxOspfLastOverloadExitCode     OBJECT-TYPE
    SYNTAX      INTEGER {
        none         (1),
        bgpSigRecv   (2),
        timerExpired (3),
        manualExit   (4),
        singleSfm    (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastOverloadExitCode indicates the reason why
         OSPF came out of overload state the last time, since reset."
    ::= { tmnxOspfStatusEntry 24 }

tmnxOspfLastExtSpfRunTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastExtSpfRunTime indicates the value of
         sysUpTime when the external OSPF Dijkstra (SPF) was last run."
    ::= { tmnxOspfStatusEntry 25 }

tmnxOspfLastFullSpfRunTime       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastFullSpfRunTime indicates the time at which
         the system last performed a full Dijkstra (SPF) run."
    ::= { tmnxOspfStatusEntry 26 }

tmnxOspfLastFullSpfInterval      OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastFullSpfInterval indicates the time, in
         hundredths of seconds, used to perform the most recent total SPF
         calculation."
    ::= { tmnxOspfStatusEntry 27 }

tmnxOspfMaxSpfRunInterval        OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMaxSpfRunInterval indicates the maximum time, in
         hundredths of seconds, used to perform a total SPF calculation."
    ::= { tmnxOspfStatusEntry 28 }

tmnxOspfMinSpfRunInterval        OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMinSpfRunInterval indicates the minimum time, in
         hundredths of seconds, used to perform a total SPF calculation."
    ::= { tmnxOspfStatusEntry 29 }

tmnxOspfAvgSpfRunInterval        OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAvgSpfRunInterval indicates the average time, in
         hundredths of seconds, of all the total SPF calculations performed by
         this OSPF router."
    ::= { tmnxOspfStatusEntry 30 }

tmnxOspfExtSpfRunInterval        OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExtSpfRunInterval indicates the time, in
         hundredths of seconds, used to perform the most recent total external
         (not incremental) SPF calculation."
    ::= { tmnxOspfStatusEntry 31 }

tmnxOspfRoutesSubmitted          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRoutesSubmitted indicates the number of routes
         submitted to the Route Table Manager (RTM) by this instance of OSPF."
    ::= { tmnxOspfStatusEntry 32 }

tmnxOspfOperRouterId             OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOperRouterId indicates the 32-bit integer
         used to uniquely identify the router in the Autonomous System.
         The default OSPF instance will use the value specified by
         tmnxOspfRouterId or the one derived from the IP layer.  For
         the non-default instances of OSPF, this is the same value as
         tmnxOspfRouterId, which must be specified before the OSPF
         instance can become operational."
    ::= { tmnxOspfStatusEntry 33 }

tmnxOspfTotalExportedRoutes      OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfTotalExportedRoutes indicates the total number of
         routes exported into OSPF from the route table manager when an export
         policy is configured.

         Value of tmnxOspfTotalExportedRoutes would be 0 when no export policy
         is configured."
    ::= { tmnxOspfStatusEntry 34 }

tmnxOspfLastLfaSpfRunTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLastLfaSpfRunTime indicates the time at which the
         system last performed a Dijkstra (LFA SPF) run."
    ::= { tmnxOspfStatusEntry 35 }

tmnxOspfLdpOverRsvpStatus        OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLdpOverRsvpStatus indicates whether LDP-over-RSVP
         feature is enabled or disabled for a specific OSPF instance."
    ::= { tmnxOspfStatusEntry 36 }

tmnxOspfRsvpShortcutStatus       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRsvpShortcutStatus indicates whether RSVP-TE
         shortcut for resolving IGP routes has been enabled or disabled for
         OSPF."
    ::= { tmnxOspfStatusEntry 37 }

tmnxOspfAdvertiseTunlLinkStatus  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvertiseTunlLinkStatus indicates whether
         advertisement of LSP shortcuts into IGP has been enabled or disabled
         for OSPF."
    ::= { tmnxOspfStatusEntry 38 }

tmnxOspfOvldLsaLimitRemInterval  OBJECT-TYPE
    SYNTAX      TimeInterval (0..65535)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOvldLsaLimitRemInterval indicates the remaining
         time in seconds for which the system will be in overload state due to
         advertising router LSA limit exceeded.

         The value of 0 implies that the system is either not in overload or
         indefinitely in overload state."
    ::= { tmnxOspfStatusEntry 39 }

tmnxOspfDbAsn                    OBJECT-TYPE
    SYNTAX      InetAutonomousSystemNumber
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfDbAsn indicates the Autonomous System
         Number the IGP is using during its database export.

         The value from TIMETRA-VRTR-MIB::vRtrAS4Byte at the moment
         tmnxOspfDatabaseExport is enabled is used as AS number.

         The used AS number gets updated when the value from tmnxOspfAdminState
         changes from disabled (2) to enabled (1) or when the value from
         tmnxOspfDatabaseExport changes from disabled(2) to enabled(1)."
    ::= { tmnxOspfStatusEntry 40 }

tmnxOspfOperState                OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOperState indicates the current operating state
         of this instance of OSPF in this router."
    ::= { tmnxOspfStatusEntry 41 }

tmnxOspfStatisticsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfStatisticsTable provides an extension of the
         tmnxOspfGeneralTable for statistics for an OSPF instance."
    ::= { tmnxOspfObjects 4 }

tmnxOspfStatisticsEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfStatisticsTable represents additional
         columns for statistics for an OSPF instance."
    AUGMENTS    { tmnxOspfGeneralEntry }
    ::= { tmnxOspfStatisticsTable 1 }

TmnxOspfStatisticsEntry          ::= SEQUENCE
{
    tmnxOspfOriginateNewLsas         Counter32,
    tmnxOspfRxNewLsas                Counter32,
    tmnxOspfFullSpfRuns              Counter32,
    tmnxOspfExtSpfRuns               Counter32,
    tmnxOspfIncremntlInterSpfRuns    Counter32,
    tmnxOspfIncrementalExtSpfRuns    Counter32,
    tmnxOspfSpfAttemptsFailed        Counter32,
    tmnxOspfNumTimesInOverload       Counter32,
    tmnxOspfNumTimesInOverflow       Counter32,
    tmnxOspfRoutesAddsFailed         Counter32,
    tmnxOspfRoutesDelsFailed         Counter32,
    tmnxOspfRoutesModsFailed         Counter32,
    tmnxOspfAreaEntries              Gauge32,
    tmnxOspfAreaLsaCountEntries      Gauge32,
    tmnxOspfAsLsdbEntries            Gauge32,
    tmnxOspfAreaLsdbEntries          Gauge32,
    tmnxOspfLinkLsdbEntries          Gauge32,
    tmnxOspfHostEntries              Gauge32,
    tmnxOspfIfEntries                Gauge32,
    tmnxOspfVirtIfEntries            Gauge32,
    tmnxOspfNbrEntries               Gauge32,
    tmnxOspfCfgNbrEntries            Gauge32,
    tmnxOspfVirtNbrEntries           Gauge32,
    tmnxOspfAreaAggrEntries          Gauge32,
    tmnxOspfIfMD5KeyEntries          Gauge32,
    tmnxOspfVirtIfMD5KeyEntries      Gauge32,
    tmnxOspfCSPFRequests             Counter32,
    tmnxOspfCSPFDroppedRequests      Counter32,
    tmnxOspfCSPFPathsFound           Counter32,
    tmnxOspfCSPFPathsNotFound        Counter32,
    tmnxOspfShamIfEntries            Gauge32,
    tmnxOspfShamNbrEntries           Gauge32,
    tmnxOspfShamIfMD5KeyEntries      Gauge32,
    tmnxOspfLfaSpfRuns               Counter32,
    tmnxOspfStatsRlfaRuns            Counter32,
    tmnxOspfStatsSidLabelRangeErrs   Counter32,
    tmnxOspfStatsSidDupErrs          Counter32,
    tmnxOspfStatsTiLfaRuns           Counter32
}

tmnxOspfOriginateNewLsas         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOriginateNewLsas indicates the number of new
         link-state advertisements that have been originated. This number is
         incremented each time the router originates a new LSA."
    ::= { tmnxOspfStatisticsEntry 2 }

tmnxOspfRxNewLsas                OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRxNewLsas indicates the number of link-state
         advertisements received determined to be new instantiations. This
         number does not include newer instantiations of self-originated
         link-state advertisements."
    ::= { tmnxOspfStatisticsEntry 3 }

tmnxOspfFullSpfRuns              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfFullSpfRuns indicates the total number of times
         that complete SPF has been run on the router since OSPF was last
         enabled."
    ::= { tmnxOspfStatisticsEntry 5 }

tmnxOspfExtSpfRuns               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExtSpfRuns indicates the total number of times
         that only the External portion of the SPF has been run since OSPF was
         last enabled."
    ::= { tmnxOspfStatisticsEntry 6 }

tmnxOspfIncremntlInterSpfRuns    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIncremntlInterSpfRuns indicates the total number
         of incremental SPF runs triggered by new or updated inter-area prefix
         or inter-area router LSAs."
    ::= { tmnxOspfStatisticsEntry 7 }

tmnxOspfIncrementalExtSpfRuns    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIncrementalExtSpfRuns indicates the total number
         of incremental SPF runs triggered by new or updated external LSAs."
    ::= { tmnxOspfStatisticsEntry 8 }

tmnxOspfSpfAttemptsFailed        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSpfAttemptsFailed indicates the number of times
         an attempt to run SPF has failed because SPF runs have been stopped as
         a result of insufficient memory resources."
    ::= { tmnxOspfStatisticsEntry 9 }

tmnxOspfNumTimesInOverload       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNumTimesInOverload indicates the count of the
         number of times the system was overloaded."
    ::= { tmnxOspfStatisticsEntry 10 }

tmnxOspfNumTimesInOverflow       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNumTimesInOverflow indicates the count of the
         number of times the system was in the overflow state."
    ::= { tmnxOspfStatisticsEntry 11 }

tmnxOspfRoutesAddsFailed         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRoutesAddsFailed indicates the number of times an
         attempt to add a route to the Route Table Manager (RTM) failed for
         this OSPF instance."
    ::= { tmnxOspfStatisticsEntry 12 }

tmnxOspfRoutesDelsFailed         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRoutesDelsFailed indicates the number of times an
         attempt to delete a route from the Route Table Manager (RTM) failed
         for this instance of OSPF."
    ::= { tmnxOspfStatisticsEntry 13 }

tmnxOspfRoutesModsFailed         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRoutesModsFailed indicates the number of times an
         attempt to modify a route in the Route Table Manager (RTM) failed for
         this instance of OSPF."
    ::= { tmnxOspfStatisticsEntry 14 }

tmnxOspfAreaEntries              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaEntries indicates the number of row entries
         in the tmnxOspfAreaTable."
    ::= { tmnxOspfStatisticsEntry 15 }

tmnxOspfAreaLsaCountEntries      OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsaCountEntries indicates the number of row
         entries in the tmnxOspfAreaLsaCountTable."
    ::= { tmnxOspfStatisticsEntry 16 }

tmnxOspfAsLsdbEntries            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbEntries indicates the number of row entries
         in the tmnxOspfAsLsdbTable."
    ::= { tmnxOspfStatisticsEntry 17 }

tmnxOspfAreaLsdbEntries          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbEntries indicates the number of row
         entries in the tmnxOspfAreaLsdbTable."
    ::= { tmnxOspfStatisticsEntry 18 }

tmnxOspfLinkLsdbEntries          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbEntries indicates the number of row
         entries in the tmnxOspfNgLinkLsdbTable."
    ::= { tmnxOspfStatisticsEntry 19 }

tmnxOspfHostEntries              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostEntries indicates the number of row entries
         in the tmnxOspfHostTable."
    ::= { tmnxOspfStatisticsEntry 20 }

tmnxOspfIfEntries                OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfEntries indicates the number of row entries in
         the tmnxOspfNgIfTable."
    ::= { tmnxOspfStatisticsEntry 21 }

tmnxOspfVirtIfEntries            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfEntries indicates the number of row entries
         in the tmnxOspfVirtIfTable."
    ::= { tmnxOspfStatisticsEntry 22 }

tmnxOspfNbrEntries               OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNbrEntries indicates the number of row entries in
         the tmnxOspfNgNbrTable."
    ::= { tmnxOspfStatisticsEntry 23 }

tmnxOspfCfgNbrEntries            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrEntries indicates the number of row entries
         in the tmnxOspfCfgNbrTable."
    ::= { tmnxOspfStatisticsEntry 24 }

tmnxOspfVirtNbrEntries           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrEntries indicates the number of row
         entries in the tmnxOspfVirtNbrTable."
    ::= { tmnxOspfStatisticsEntry 25 }

tmnxOspfAreaAggrEntries          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrEntries indicates the number of row
         entries in the tmnxOspfAreaAggrTable."
    ::= { tmnxOspfStatisticsEntry 26 }

tmnxOspfIfMD5KeyEntries          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyEntries indicates the number of row
         entries in the tmnxOspfNgIfMD5KeyTable."
    ::= { tmnxOspfStatisticsEntry 27 }

tmnxOspfVirtIfMD5KeyEntries      OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyEntries indicates the number of row
         entries in the tmnxOspfVirtIfMD5KeyTable."
    ::= { tmnxOspfStatisticsEntry 28 }

tmnxOspfCSPFRequests             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCSPFRequests indicates the number of CSPF
         requests made to the OSPF protocol."
    ::= { tmnxOspfStatisticsEntry 29 }

tmnxOspfCSPFDroppedRequests      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCSPFDroppedRequests indicates the number of
         dropped CSPF requests made by the OSPF protocol."
    ::= { tmnxOspfStatisticsEntry 30 }

tmnxOspfCSPFPathsFound           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCSPFPathsFound indicates the number of of paths
         found for the requests made to OSPF protocol."
    ::= { tmnxOspfStatisticsEntry 31 }

tmnxOspfCSPFPathsNotFound        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCSPFPathsNotFound indicates the number of of
         paths not found for the requests made to OSPF protocol."
    ::= { tmnxOspfStatisticsEntry 32 }

tmnxOspfShamIfEntries            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfEntries indicates the number of row entries
         in the tmnxOspfShamIfTable."
    ::= { tmnxOspfStatisticsEntry 33 }

tmnxOspfShamNbrEntries           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrEntries indicates the number of row
         entries in the tmnxOspfShamNbrTable."
    ::= { tmnxOspfStatisticsEntry 34 }

tmnxOspfShamIfMD5KeyEntries      OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyEntries indicates the number of row
         entries in the tmnxOspfShamIfMD5KeyTable."
    ::= { tmnxOspfStatisticsEntry 35 }

tmnxOspfLfaSpfRuns               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaSpfRuns indicates the total number of times
         that complete LFA SPF has been run on the router since OSPF was last
         enabled."
    ::= { tmnxOspfStatisticsEntry 36 }

tmnxOspfStatsRlfaRuns            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfStatsRlfaRuns indicates the number of
         times remote-loopfree-alternate calculations have been made."
    ::= { tmnxOspfStatisticsEntry 37 }

tmnxOspfStatsSidLabelRangeErrs   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfStatsSidLabelRangeErrs gives the total number of
         errors for SIDs that are not within the label-range of the router."
    ::= { tmnxOspfStatisticsEntry 38 }

tmnxOspfStatsSidDupErrs          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfStatsSidDupErrs gives the total number of errors
         for SIDs which are already assigned to another prefix."
    ::= { tmnxOspfStatisticsEntry 39 }

tmnxOspfStatsTiLfaRuns           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfStatsTiLfaRuns indicates the number of
         times Topology Independent loopfree-alternate calculations have been
         made."
    ::= { tmnxOspfStatisticsEntry 40 }

tmnxOspfChangedTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfChangedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfChangedTable provides an extension of the
         tmnxOspfGeneralTable for last changed timestamps for an OSPF instance."
    ::= { tmnxOspfObjects 5 }

tmnxOspfChangedEntry             OBJECT-TYPE
    SYNTAX      TmnxOspfChangedEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfChangedTable represents additional
         columns for last changed timestamps for an OSPF instance."
    AUGMENTS    { tmnxOspfGeneralEntry }
    ::= { tmnxOspfChangedTable 1 }

TmnxOspfChangedEntry             ::= SEQUENCE
{
    tmnxOspfAreaTableChanged         TimeStamp,
    tmnxOspfHostTableChanged         TimeStamp,
    tmnxOspfIfTableChanged           TimeStamp,
    tmnxOspfVirtIfTableChanged       TimeStamp,
    tmnxOspfNbrTableChanged          TimeStamp,
    tmnxOspfCfgNbrTableChanged       TimeStamp,
    tmnxOspfVirtNbrTableChanged      TimeStamp,
    tmnxOspfAreaAggTableChanged      TimeStamp,
    tmnxOspfIfMD5KeyTableChanged     TimeStamp,
    tmnxOspfVirtIfMD5KeyTableChanged TimeStamp,
    tmnxOspfShamIfTableChanged       TimeStamp,
    tmnxOspfShamNbrTableChanged      TimeStamp,
    tmnxOspfShamIfMD5KeyTableChanged TimeStamp
}

tmnxOspfAreaTableChanged         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfAreaTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfAreaTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 1 }

tmnxOspfHostTableChanged         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfHostTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created, tmnxOspfHostTableChanged
         will have a 0 value."
    ::= { tmnxOspfChangedEntry 2 }

tmnxOspfIfTableChanged           OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfNgIfTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created, tmnxOspfIfTableChanged
         will have a 0 value."
    ::= { tmnxOspfChangedEntry 3 }

tmnxOspfVirtIfTableChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfVirtIfTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfVirtIfTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 4 }

tmnxOspfNbrTableChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNbrTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfNgNbrTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfNbrTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 5 }

tmnxOspfCfgNbrTableChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfCfgNbrTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfCfgNbrTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 6 }

tmnxOspfVirtNbrTableChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfVirtNbrTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfVirtNbrTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 7 }

tmnxOspfAreaAggTableChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfAreaAggrTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfAreaAggTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 8 }

tmnxOspfIfMD5KeyTableChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfNgIfMD5KeyTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfIfMD5KeyTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 9 }

tmnxOspfVirtIfMD5KeyTableChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfVirtIfMD5KeyTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfVirtIfMD5KeyTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 10 }

tmnxOspfShamIfTableChanged       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfShamIfTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfShamIfTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 11 }

tmnxOspfShamNbrTableChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfShamNbrTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfShamNbrTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 12 }

tmnxOspfShamIfMD5KeyTableChanged OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyTableChanged indicates the sysUpTime
         when a configurable object in the tmnxOspfShamIfMD5KeyTable was last
         modified for this OSPF instance.  If no modifications have been
         made since this instance of OSPF was created,
         tmnxOspfShamIfMD5KeyTableChanged will have a 0 value."
    ::= { tmnxOspfChangedEntry 13 }

tmnxOspfAreaTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAreaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaTable contains information describing the configured
         parameters and cumulative statistics of the router's attached areas."
    REFERENCE
        "OSPF Version 2, Section 6 The Area Data Structure"
    ::= { tmnxOspfObjects 6 }

tmnxOspfAreaEntry                OBJECT-TYPE
    SYNTAX      TmnxOspfAreaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaEntry contains information describing the configured
         parameters and cumulative statistics of one of the router's attached
         areas."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaId
    }
    ::= { tmnxOspfAreaTable 1 }

TmnxOspfAreaEntry                ::= SEQUENCE
{
    tmnxOspfAreaId                   TmnxOspfAreaIdTc,
    tmnxOspfAreaStatus               RowStatus,
    tmnxOspfAreaLastChanged          TimeStamp,
    tmnxOspfImportAsExtern           INTEGER,
    tmnxOspfAreaSummary              INTEGER,
    tmnxOspfAreaRangeBlackhole       TruthValue,
    tmnxOspfStubMetric               Integer32,
    tmnxOspfAreaStubMetricType       INTEGER,
    tmnxOspfAreaOriginateDefault     INTEGER,
    tmnxOspfAreaNssaRedistribute     TruthValue,
    tmnxOspfAreaNssaTranslatorRole   INTEGER,
    tmnxOspfAreaNssaTranslatorStabInt Unsigned32,
    tmnxOspfAreaBdrRtrCount          Gauge32,
    tmnxOspfAreaAsBdrRtrCount        Gauge32,
    tmnxOspfAreaScopeLsaCount        Gauge32,
    tmnxOspfAreaScopeLsaCksumSum     Integer32,
    tmnxOspfAreaScopeUnkLsaCount     Gauge32,
    tmnxOspfAreaScopeUnkLsaCksumSum  Integer32,
    tmnxOspfAreaNssaTranslatorState  INTEGER,
    tmnxOspfAreaActiveInterfaces     Unsigned32,
    tmnxOspfAreaInterfaceCount       Unsigned32,
    tmnxOspfAreaVirtualLinkCount     Unsigned32,
    tmnxOspfAreaLastSpfRunTime       TimeStamp,
    tmnxOspfAreaSpfRuns              Counter32,
    tmnxOspfAreaNssaTranslatorEvents Counter32,
    tmnxOspfAreaNeighborCount        Gauge32,
    tmnxOspfAreaShamLinkCount        Gauge32,
    tmnxOspfAreaKeyRolloverInterval  Unsigned32,
    tmnxOspfAreaLoopfreeAltExclude   TruthValue,
    tmnxOspfAreaNssaAdjCheck         TruthValue,
    tmnxOspfAreaAdvRtrCapability     TruthValue,
    tmnxOspfAreaDbExportExclude      TruthValue,
    tmnxOspfAreaExtendedLsa          INTEGER,
    tmnxOspfAreaImportPolicy1        TNamedItemOrEmpty,
    tmnxOspfAreaImportPolicy2        TNamedItemOrEmpty,
    tmnxOspfAreaImportPolicy3        TNamedItemOrEmpty,
    tmnxOspfAreaImportPolicy4        TNamedItemOrEmpty,
    tmnxOspfAreaImportPolicy5        TNamedItemOrEmpty,
    tmnxOspfAreaExportPolicy1        TNamedItemOrEmpty,
    tmnxOspfAreaExportPolicy2        TNamedItemOrEmpty,
    tmnxOspfAreaExportPolicy3        TNamedItemOrEmpty,
    tmnxOspfAreaExportPolicy4        TNamedItemOrEmpty,
    tmnxOspfAreaExportPolicy5        TNamedItemOrEmpty,
    tmnxOspfAreaAdvertiseNeProfile   TNamedItemOrEmpty
}

tmnxOspfAreaId                   OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaId specifies a 32-bit integer uniquely
         identifying an area.  Area ID 0 is used for the OSPF backbone."
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfAreaEntry 1 }

tmnxOspfAreaStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaStatus variable is used for creation and deletion of
         tmnxOspfAreaTable row entries."
    ::= { tmnxOspfAreaEntry 2 }

tmnxOspfAreaLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfAreaEntry 3 }

tmnxOspfImportAsExtern           OBJECT-TYPE
    SYNTAX      INTEGER {
        importExternal   (1),
        importNoExternal (2),
        importNssa       (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfImportAsExtern specifies whether an area is a
         Stub area, NSSA, or standard area. AS-scope LSAs are not imported into
         Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which
         have Area-scope"
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    DEFVAL      { importExternal }
    ::= { tmnxOspfAreaEntry 4 }

tmnxOspfAreaSummary              OBJECT-TYPE
    SYNTAX      INTEGER {
        noAreaSummary   (1),
        sendAreaSummary (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaSummary specifies how the Inter-Area LSAs are
         imported into stub areas. It has no effect on other areas.

         If it is 'noAreaSummary (1)', the router will neither originate nor
         propagate Inter-Area LSAs into the stub area. It will rely entirely on
         its default route.

         If it is 'sendAreaSummary (2)', the router will both summarize and
         propagate Inter-Area LSAs."
    DEFVAL      { sendAreaSummary }
    ::= { tmnxOspfAreaEntry 5 }

tmnxOspfAreaRangeBlackhole       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaRangeBlackhole specifies whether or not
         a blackhole route needs to be installed for the aggregates
         configured in this area. If the value is 'true', a lowest
         priority blackhole route is installed for advertised aggregates
         in this area.  Note that if the value is 'false', the blackhole
         route is not installed and there is a potential for a routing
         loop."
    DEFVAL      { true }
    ::= { tmnxOspfAreaEntry 6 }

tmnxOspfStubMetric               OBJECT-TYPE
    SYNTAX      Integer32 (1..16777214)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfStubMetric specifies the metric value advertised
         for the default route into Stub and NSSA areas."
    ::= { tmnxOspfAreaEntry 7 }

tmnxOspfAreaStubMetricType       OBJECT-TYPE
    SYNTAX      INTEGER {
        ospfMetric     (1),
        comparableCost (2),
        nonComparable  (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaStubMetricType specifies the type of metric
         advertised as a default route."
    DEFVAL      { ospfMetric }
    ::= { tmnxOspfAreaEntry 8 }

tmnxOspfAreaOriginateDefault     OBJECT-TYPE
    SYNTAX      INTEGER {
        noOriginate    (1),
        originateType3 (2),
        originateType7 (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaOriginateDefault specifies whether or not
         when configuring an NSSA with no summaries, the Area Border Router
         (ABR) will inject a type-7 LSA default route into the NSSA area. The
         default behavior is to inject a type-3 LSA default route, but some
         older implementations expect a type-7 LSA default route.

         When tmnxOspfAreaOriginateDefault has a value of 'originateType7',
         type-7 LSA default routes are injected into an NSSA configured with no
         summaries.

         When tmnxOspfAreaOriginateDefault has a value of 'originateType3',
         type-3 LSA default routes are injected into an NSSA configured with no
         summaries.

         When tmnxOspfAreaOriginateDefault has a value of 'noOriginate', no
         default routes are generated."
    DEFVAL      { noOriginate }
    ::= { tmnxOspfAreaEntry 9 }

tmnxOspfAreaNssaRedistribute     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaRedistribute specifies whether or not
         external routes are to be injected or redistributed into the NSSA
         area. Setting tmnxOspfAreaNssaRedistribute equal 'false' causes
         external routes to be not injected or redistributed into the NSSA
         area."
    DEFVAL      { true }
    ::= { tmnxOspfAreaEntry 10 }

tmnxOspfAreaNssaTranslatorRole   OBJECT-TYPE
    SYNTAX      INTEGER {
        always    (1),
        candidate (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaTranslatorRole specifies an NSSA Border
         router's ability to perform NSSA translation of NSSA-LSAs into
         AS-External-LSAs."
    DEFVAL      { candidate }
    ::= { tmnxOspfAreaEntry 11 }

tmnxOspfAreaNssaTranslatorStabInt OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaTranslatorStabInt specifies the number of
         seconds after an elected translator determines its services are no
         longer required, that it should continue to perform its translation
         duties."
    DEFVAL      { 40 }
    ::= { tmnxOspfAreaEntry 12 }

tmnxOspfAreaBdrRtrCount          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaBdrRtrCount indicates the total number of
         area border routers reachable within this area. This is initially
         zero, and is calculated in each SPF pass."
    ::= { tmnxOspfAreaEntry 13 }

tmnxOspfAreaAsBdrRtrCount        OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAsBdrRtrCount indicates the total number of
         Autonomous System border routers reachable within this area. This is
         initially zero, and is calculated in each SPF pass."
    ::= { tmnxOspfAreaEntry 14 }

tmnxOspfAreaScopeLsaCount        OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaScopeLsaCount indicates the total number of
         Area-Scope link state advertisements in this area's link-state
         database."
    ::= { tmnxOspfAreaEntry 15 }

tmnxOspfAreaScopeLsaCksumSum     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaScopeLsaCksumSum indicates the 32-bit
         unsigned sum of the Area-Scope link state advertisements' LS checksums
         contained in this area's link-state database. The sum can be used to
         determine if there has been a change in a router's link-state
         database, and to compare the link-state database of two routers."
    ::= { tmnxOspfAreaEntry 16 }

tmnxOspfAreaScopeUnkLsaCount     OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaScopeUnkLsaCount indicates the total number
         of unknown Area-Scope link-state advertisements in this area's
         link-state database."
    ::= { tmnxOspfAreaEntry 17 }

tmnxOspfAreaScopeUnkLsaCksumSum  OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaScopeUnkLsaCksumSum indicates the 32-bit
         unsigned sum of the unknown Area-Scope link state advertisements' LS
         checksums contained in this area's link-state database. The sum can be
         used to determine if there has been a change in a router's link-state
         database, and to compare the link-state database of two routers."
    ::= { tmnxOspfAreaEntry 18 }

tmnxOspfAreaNssaTranslatorState  OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        elected  (2),
        disabled (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaTranslatorState indicates if
         and how an NSSA Border router is performing NSSA translation
         of NSSA-LSAs into AS-External-LSAs.  When this object is set
         to 'enabled', the NSSA Border router's tmnxOspfAreaNssaTranslatorRole
         has been set to always.  When this object is set to 'elected',
         a candidate NSSA Border router is translating NSSA-LSAs into
         AS-External-LSAs.  When this object is set to 'disabled', a
         candidate NSSA Border router is NOT translating NSSA-LSAs into
         AS-External-LSAs."
    ::= { tmnxOspfAreaEntry 19 }

tmnxOspfAreaActiveInterfaces     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaActiveInterfaces indicates the total number
         of currently active interfaces in this area."
    ::= { tmnxOspfAreaEntry 20 }

tmnxOspfAreaInterfaceCount       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaInterfaceCount indicates total number of
         interfaces configured in this area."
    ::= { tmnxOspfAreaEntry 21 }

tmnxOspfAreaVirtualLinkCount     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaVirtualLinkCount indicates the total number
         of virtual links configured through this area."
    ::= { tmnxOspfAreaEntry 22 }

tmnxOspfAreaLastSpfRunTime       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLastSpfRunTime indicates the sysUpTime when
         Intra-area SPF was last run on this area."
    ::= { tmnxOspfAreaEntry 23 }

tmnxOspfAreaSpfRuns              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaSpfRuns indicates the number of times that
         the intra-area route table has been calculated using this area's
         link-state database. This is typically done using Dijkstra's
         algorithm."
    ::= { tmnxOspfAreaEntry 24 }

tmnxOspfAreaNssaTranslatorEvents OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaTranslatorEvents indicates the number of
         Translator State changes that have occurred since the last boot-up."
    ::= { tmnxOspfAreaEntry 25 }

tmnxOspfAreaNeighborCount        OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNeighborCount indicates total number of
         neighbors configured in this area."
    ::= { tmnxOspfAreaEntry 26 }

tmnxOspfAreaShamLinkCount        OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaShamLinkCount indicates the total number of
         sham links configured in this area."
    ::= { tmnxOspfAreaEntry 27 }

tmnxOspfAreaKeyRolloverInterval  OBJECT-TYPE
    SYNTAX      Unsigned32 (10..300)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaKeyRolloverInterval specifies the time after
         which a key rollover will start."
    DEFVAL      { 10 }
    ::= { tmnxOspfAreaEntry 28 }

tmnxOspfAreaLoopfreeAltExclude   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLoopfreeAltExclude specifies whether or not
         the OSPF area should be excluded during LFA calculations. If the value
         is 'true', the OSPF area is excluded from LFA calculations. If the
         value is 'false', the OSPF area is included in LFA calculations.

         The value of tmnxOspfAreaLoopfreeAltExclude is only valid when
         tmnxOspfLoopfreeAlternate has a value of 'true'."
    DEFVAL      { false }
    ::= { tmnxOspfAreaEntry 29 }

tmnxOspfAreaNssaAdjCheck         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaNssaAdjCheck specifies whether or not
         adjacency checks shall be performed for the NSSA. If the value is
         'false', then no checks are done. If the value is 'true', then
         adjacency checks will be done."
    DEFVAL      { false }
    ::= { tmnxOspfAreaEntry 30 }

tmnxOspfAreaAdvRtrCapability     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAdvRtrCapability specifies whether or not
         advertise-router-capabilities are enabled at area level."
    DEFVAL      { true }
    ::= { tmnxOspfAreaEntry 31 }

tmnxOspfAreaDbExportExclude      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaDbExportExclude specifies whether database
         export is explicitly disabled or not for this OSPF area.

         If the value is 'true', database export is disabled for this OSPF
         area.

         If the value is 'false', this area inherits the configuration from the
         instance level; i.e. if tmnxOspfDatabaseExport is 'enabled' for the
         OSPF instance, then database export is enabled for this area."
    DEFVAL      { false }
    ::= { tmnxOspfAreaEntry 32 }

tmnxOspfAreaExtendedLsa          OBJECT-TYPE
    SYNTAX      INTEGER {
        inherit (0),
        only    (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExtendedLsa specifies the whether or not to
         use extended LSAs for this OSPFv3 area."
    DEFVAL      { inherit }
    ::= { tmnxOspfAreaEntry 33 }

tmnxOspfAreaImportPolicy1        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaImportPolicy1 specifies the name of the 1st
         import policy to be used for determining if a route is imported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         another OSPF area into this area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 34 }

tmnxOspfAreaImportPolicy2        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaImportPolicy2 specifies the name of the 2nd
         import policy to be used for determining if a route is imported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         another OSPF area into this area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 35 }

tmnxOspfAreaImportPolicy3        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaImportPolicy3 specifies the name of the 3rd
         import policy to be used for determining if a route is imported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         another OSPF area into this area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 36 }

tmnxOspfAreaImportPolicy4        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaImportPolicy4 specifies the name of the 4th
         import policy to be used for determining if a route is imported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         another OSPF area into this area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 37 }

tmnxOspfAreaImportPolicy5        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaImportPolicy5 specifies the name of the 5th
         import policy to be used for determining if a route is imported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         another OSPF area into this area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 38 }

tmnxOspfAreaExportPolicy1        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExportPolicy1 specifies the name of the 1st
         export policy to be used for determining if a route is exported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         this OSPF area to another OSPF area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 39 }

tmnxOspfAreaExportPolicy2        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExportPolicy2 specifies the name of the 1st
         export policy to be used for determining if a route is exported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         this OSPF area to another OSPF area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 40 }

tmnxOspfAreaExportPolicy3        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExportPolicy3 specifies the name of the 1st
         export policy to be used for determining if a route is exported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         this OSPF area to another OSPF area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 41 }

tmnxOspfAreaExportPolicy4        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExportPolicy4 specifies the name of the 1st
         export policy to be used for determining if a route is exported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         this OSPF area to another OSPF area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 42 }

tmnxOspfAreaExportPolicy5        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaExportPolicy5 specifies the name of the 1st
         export policy to be used for determining if a route is exported as
         summary type 3 LSA in OSPFv2 or inter-area-prefix-LSA in OSPFv3 from
         this OSPF area to another OSPF area."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 43 }

tmnxOspfAreaAdvertiseNeProfile   OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAdvertiseNeProfile specifies the name of the
         Network Element (NE) profile to be used for node discovering.

         The NE information from the profile will be advertised via type 10
         Opaque LSA."
    DEFVAL      { ''H }
    ::= { tmnxOspfAreaEntry 44 }

tmnxOspfAreaLsaCountTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAreaLsaCountEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaLsaCountTable maintains per area per LSA type
         counters."
    ::= { tmnxOspfObjects 7 }

tmnxOspfAreaLsaCountEntry        OBJECT-TYPE
    SYNTAX      TmnxOspfAreaLsaCountEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "tmnxOspfAreaLsaCountEntry contains link state advertisements (LSAs)
         counters of a given type of a given area."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaId,
        tmnxOspfAreaLsaCountLsaType
    }
    ::= { tmnxOspfAreaLsaCountTable 1 }

TmnxOspfAreaLsaCountEntry        ::= SEQUENCE
{
    tmnxOspfAreaLsaCountLsaType      Unsigned32,
    tmnxOspfAreaLsaCountNumber       Gauge32
}

tmnxOspfAreaLsaCountLsaType      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsaCountLsaType identifies a row in this
         table for a specific LSA type within an area.

         When tmnxOspfVersion has a value of 'version2', the LSA types
         are limited to these values:
                routerLink (1),
                networkLink (2),
                summaryLink (3),
                asSummaryLink (4),
                multicastLink (6),
                nssaExternalLink (7),
                areaOpaqueLink (10)

         When tmnxOspfVersion has a value of 'version3', this value is taken
         from the lower 13-bits of the 'LsType' field."
    ::= { tmnxOspfAreaLsaCountEntry 1 }

tmnxOspfAreaLsaCountNumber       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsaCountNumber indicates the number of LSAs
         of tmnxOspfAreaLsaCountLsaType with this area."
    ::= { tmnxOspfAreaLsaCountEntry 2 }

tmnxOspfAsLsdbTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAsLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The OSPF Process's AS-Scope Link State Database."
    ::= { tmnxOspfObjects 8 }

tmnxOspfAsLsdbEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfAsLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A single AS-Scope Link State Advertisement."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAsLsdbType,
        tmnxOspfAsLsdbRouterId,
        tmnxOspfAsLsdbLsid
    }
    ::= { tmnxOspfAsLsdbTable 1 }

TmnxOspfAsLsdbEntry              ::= SEQUENCE
{
    tmnxOspfAsLsdbType               Unsigned32,
    tmnxOspfAsLsdbRouterId           TmnxOspfRouterIdTc,
    tmnxOspfAsLsdbLsid               Unsigned32,
    tmnxOspfAsLsdbSequence           Integer32,
    tmnxOspfAsLsdbAge                Integer32,
    tmnxOspfAsLsdbChecksum           Integer32,
    tmnxOspfAsLsdbAdvertisement      OCTET STRING,
    tmnxOspfAsLsdbTypeKnown          TruthValue
}

tmnxOspfAsLsdbType               OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbType specifies the type of the link-state
         advertisement.  Each link-state type has a separate advertisement
         format.  AS-Scope LSAs not recognized by the router may be stored
         in the database."
    ::= { tmnxOspfAsLsdbEntry 1 }

tmnxOspfAsLsdbRouterId           OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbRouterId specifies the 32-bit number that
         uniquely identifies the originating router in the Autonomous System."
    REFERENCE
        "OSPF Version 2, Appendix C.1 Global parameters"
    ::= { tmnxOspfAsLsdbEntry 2 }

tmnxOspfAsLsdbLsid               OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbLsid specifies the Link State ID that
         is an LS Type Specific field containing a unique identifier;
         it identifies the piece of the routing domain that is being
         described by the advertisement.  In OSPFv3, the LSID has no
         addressing semantics."
    ::= { tmnxOspfAsLsdbEntry 3 }

tmnxOspfAsLsdbSequence           OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbSequence indicates the signed 32-bit
         integer sequence number field. It is used to detect old and duplicate
         link-state advertisements. The space of sequence numbers is linearly
         ordered. The larger the sequence number the more recent the
         advertisement."
    REFERENCE
        "OSPF Version  2,  Section  12.1.6  LS  sequence number"
    ::= { tmnxOspfAsLsdbEntry 4 }

tmnxOspfAsLsdbAge                OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbAge indicates the age of the link-state
         advertisement in seconds."
    REFERENCE
        "OSPF Version 2, Section 12.1.1 LS age"
    ::= { tmnxOspfAsLsdbEntry 5 }

tmnxOspfAsLsdbChecksum           OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbChecksum indicates the checksum of the
         complete contents of the advertisement, excepting the age field. The
         age field is excepted so that an advertisement's age can be
         incremented without updating the checksum. The checksum used is the
         same that is used for ISO connectionless datagrams; it is commonly
         referred to as the Fletcher checksum."
    REFERENCE
        "OSPF Version 2, Section 12.1.7 LS checksum"
    ::= { tmnxOspfAsLsdbEntry 6 }

tmnxOspfAsLsdbAdvertisement      OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..65535))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbAdvertisement indicates the entire Link
         State Advertisement, including its header."
    ::= { tmnxOspfAsLsdbEntry 7 }

tmnxOspfAsLsdbTypeKnown          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAsLsdbTypeKnown indicates whether the LSA type is
         recognized by this Router."
    ::= { tmnxOspfAsLsdbEntry 8 }

tmnxOspfAreaLsdbTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAreaLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaLsdbTable contains the OSPF Process's Area-Scope Link
         State Database."
    ::= { tmnxOspfObjects 9 }

tmnxOspfAreaLsdbEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfAreaLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaLsdbEntry contains information about a single
         Area-Scope Link State Advertisement."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaLsdbAreaId,
        tmnxOspfAreaLsdbType,
        tmnxOspfAreaLsdbRouterId,
        tmnxOspfAreaLsdbLsid
    }
    ::= { tmnxOspfAreaLsdbTable 1 }

TmnxOspfAreaLsdbEntry            ::= SEQUENCE
{
    tmnxOspfAreaLsdbAreaId           TmnxOspfAreaIdTc,
    tmnxOspfAreaLsdbType             Unsigned32,
    tmnxOspfAreaLsdbRouterId         TmnxOspfRouterIdTc,
    tmnxOspfAreaLsdbLsid             Unsigned32,
    tmnxOspfAreaLsdbSequence         Integer32,
    tmnxOspfAreaLsdbAge              Integer32,
    tmnxOspfAreaLsdbChecksum         Integer32,
    tmnxOspfAreaLsdbAdvertisement    OCTET STRING,
    tmnxOspfAreaLsdbTypeKnown        TruthValue,
    tmnxOspfAreaLsdbImportFltrd      TruthValue,
    tmnxOspfAreaLsdbExportFltrd      TruthValue
}

tmnxOspfAreaLsdbAreaId           OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbAreaId specifies the 32-bit identifier of
         the Area from which the LSA was received."
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfAreaLsdbEntry 1 }

tmnxOspfAreaLsdbType             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbType specifies the type of the
         link state advertisement.  Each link state type has a separate
         advertisement format. Area-Scope LSAs unrecognized by the router
         are also stored in this database."
    ::= { tmnxOspfAreaLsdbEntry 2 }

tmnxOspfAreaLsdbRouterId         OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbRouterId specifies the 32-bit number that
         uniquely identifies the originating router in the Autonomous System."
    REFERENCE
        "OSPF Version 2, Appendix C.1 Global parameters"
    ::= { tmnxOspfAreaLsdbEntry 3 }

tmnxOspfAreaLsdbLsid             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbLsid specifies the Link State ID that
         is an LS Type Specific field containing a unique identifier;
         it identifies the piece of the routing domain that is being
         described by the advertisement.  In OSPFv3, the LSID has no
         addressing semantics."
    ::= { tmnxOspfAreaLsdbEntry 4 }

tmnxOspfAreaLsdbSequence         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbSequence indicates the signed
         32-bit integer that is the sequence number field.  It is used
         to detect old and duplicate link-state advertisements.  The
         space of sequence numbers is linearly ordered.  The larger
         the sequence number the more recent the advertisement."
    REFERENCE
        "OSPF Version  2,  Section  12.1.6  LS  sequence
         number"
    ::= { tmnxOspfAreaLsdbEntry 5 }

tmnxOspfAreaLsdbAge              OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbAge indicates the age of the link-state
         advertisement in seconds."
    REFERENCE
        "OSPF Version 2, Section 12.1.1 LS age"
    ::= { tmnxOspfAreaLsdbEntry 6 }

tmnxOspfAreaLsdbChecksum         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbChecksum indicates the checksum of the
         complete contents of the advertisement, excepting the age field. The
         age field is excepted so that an advertisement's age can be
         incremented without updating the checksum. The checksum used is the
         same that is used for ISO connectionless datagrams; it is commonly
         referred to as the Fletcher checksum."
    REFERENCE
        "OSPF Version 2, Section 12.1.7 LS checksum"
    ::= { tmnxOspfAreaLsdbEntry 7 }

tmnxOspfAreaLsdbAdvertisement    OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..65535))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbAdvertisement indicates the entire Link
         State Advertisement, including its header."
    ::= { tmnxOspfAreaLsdbEntry 8 }

tmnxOspfAreaLsdbTypeKnown        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbTypeKnown indicates whether the LSA type
         is recognized by this Router."
    ::= { tmnxOspfAreaLsdbEntry 9 }

tmnxOspfAreaLsdbImportFltrd      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbImportFltrd indicates whether the LSA is
         not flooded due to the area import policy."
    ::= { tmnxOspfAreaLsdbEntry 10 }

tmnxOspfAreaLsdbExportFltrd      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaLsdbExportFltrd indicates whether the LSA is
         not flooded due to another areas export policy."
    ::= { tmnxOspfAreaLsdbEntry 11 }

tmnxOspfLinkLsdbTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfLinkLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfLinkLsdbTable contains the OSPF Process's Link-Scope Link
         State Database.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgLinkLsdbTable"
    ::= { tmnxOspfObjects 10 }

tmnxOspfLinkLsdbEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfLinkLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfLinkLsdbEntry contains information for a single Link-Scope
         Link State Advertisement."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfLinkLsdbIfIndex,
        tmnxOspfLinkLsdbIfInstId,
        tmnxOspfLinkLsdbType,
        tmnxOspfLinkLsdbRouterId,
        tmnxOspfLinkLsdbLsid
    }
    ::= { tmnxOspfLinkLsdbTable 1 }

TmnxOspfLinkLsdbEntry            ::= SEQUENCE
{
    tmnxOspfLinkLsdbIfIndex          InterfaceIndex,
    tmnxOspfLinkLsdbIfInstId         TmnxOspfIfInstIdTc,
    tmnxOspfLinkLsdbType             Unsigned32,
    tmnxOspfLinkLsdbRouterId         TmnxOspfRouterIdTc,
    tmnxOspfLinkLsdbLsid             Unsigned32,
    tmnxOspfLinkLsdbSequence         Integer32,
    tmnxOspfLinkLsdbAge              Integer32,
    tmnxOspfLinkLsdbChecksum         Integer32,
    tmnxOspfLinkLsdbAdvertisement    OCTET STRING,
    tmnxOspfLinkLsdbTypeKnown        TruthValue
}

tmnxOspfLinkLsdbIfIndex          OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbIfIndex specifies the identifier of the
         link from which the LSA was received."
    ::= { tmnxOspfLinkLsdbEntry 1 }

tmnxOspfLinkLsdbIfInstId         OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbIfInstId specifies the identifier of the
         interface instance from which the LSA was received."
    ::= { tmnxOspfLinkLsdbEntry 2 }

tmnxOspfLinkLsdbType             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbType specifies the type of the
         link state advertisement.  Each link state type has a separate
         advertisement format. Link-Scope LSAs unrecognized by the router
         are also stored in this database."
    ::= { tmnxOspfLinkLsdbEntry 3 }

tmnxOspfLinkLsdbRouterId         OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbRouterId specifies the 32-bit number that
         uniquely identifies the originating router in the Autonomous System."
    REFERENCE
        "OSPF Version 2, Appendix C.1 Global parameters"
    ::= { tmnxOspfLinkLsdbEntry 4 }

tmnxOspfLinkLsdbLsid             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbLsid specifies the Link State ID that is
         an LS Type Specific field containing a unique identifier; it
         identifies the piece of the routing domain that is being described by
         the advertisement. In OSPFv3, the LSID has no addressing semantics."
    ::= { tmnxOspfLinkLsdbEntry 5 }

tmnxOspfLinkLsdbSequence         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbSequence indicates the signed 32-bit
         integer sequence number field. It is used to detect old and duplicate
         link-state advertisements. The space of sequence numbers is linearly
         ordered. The larger the sequence number the more recent the
         advertisement."
    REFERENCE
        "OSPF Version  2,  Section  12.1.6  LS  sequence
         number"
    ::= { tmnxOspfLinkLsdbEntry 6 }

tmnxOspfLinkLsdbAge              OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbAge indicates the age of the link-state
         advertisement in seconds."
    REFERENCE
        "OSPF Version 2, Section 12.1.1 LS age"
    ::= { tmnxOspfLinkLsdbEntry 7 }

tmnxOspfLinkLsdbChecksum         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbChecksum indicates the checksum
         of the complete contents of the advertisement, excepting the
         age field. The age field is excepted so that an advertisement's
         age can be incremented without updating the checksum.  The
         checksum used is the same that is used for ISO connectionless
         datagrams; it is commonly referred to as the Fletcher checksum."
    REFERENCE
        "OSPF Version 2, Section 12.1.7 LS checksum"
    ::= { tmnxOspfLinkLsdbEntry 8 }

tmnxOspfLinkLsdbAdvertisement    OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..65535))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbAdvertisement indicates the entire Link
         State Advertisement, including its header."
    ::= { tmnxOspfLinkLsdbEntry 9 }

tmnxOspfLinkLsdbTypeKnown        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfLinkLsdbTypeKnown indicates whether the LSA type
         is recognized by this Router."
    ::= { tmnxOspfLinkLsdbEntry 10 }

tmnxOspfHostTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfHostTable contains the list of Hosts, and their metrics,
         that the router will advertise as host routes."
    REFERENCE
        "OSPF Version 2, Appendix C.6  Host route
         parameters"
    ::= { tmnxOspfObjects 11 }

tmnxOspfHostEntry                OBJECT-TYPE
    SYNTAX      TmnxOspfHostEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfHostEntry contains information about a metric to be
         advertised when a given host is reachable."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfHostAddressType,
        tmnxOspfHostAddress
    }
    ::= { tmnxOspfHostTable 1 }

TmnxOspfHostEntry                ::= SEQUENCE
{
    tmnxOspfHostAddressType          InetAddressType,
    tmnxOspfHostAddress              InetAddress,
    tmnxOspfHostMetric               Metric,
    tmnxOspfHostStatus               RowStatus,
    tmnxOspfHostLastChanged          TimeStamp,
    tmnxOspfHostAreaID               TmnxOspfAreaIdTc
}

tmnxOspfHostAddressType          OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostAddressType specifies the address type of
         tmnxOspfHostAddress. Only IPv4 or IPv6 addresses without zone index
         are expected."
    REFERENCE
        "OSPF Version 2, Appendix C.6 Host route parameters"
    ::= { tmnxOspfHostEntry 1 }

tmnxOspfHostAddress              OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostAddress specifies the IP Address of the
         Host.  This MUST be a Global address."
    REFERENCE
        "OSPF Version 2, Appendix C.6 Host route
         parameters"
    ::= { tmnxOspfHostEntry 2 }

tmnxOspfHostMetric               OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostMetric specifies the metric to be advertised."
    REFERENCE
        "OSPF Version 2, Appendix C.6 Host route
         parameters"
    ::= { tmnxOspfHostEntry 3 }

tmnxOspfHostStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostStatus controls the status of this row entry.
         The use of RowStatus is covered in more detail in [6]."
    ::= { tmnxOspfHostEntry 4 }

tmnxOspfHostLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfHostEntry 5 }

tmnxOspfHostAreaID               OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfHostAreaID specifies he Area the Host
         Entry is to be found within.  By default, the area that a
         subsuming OSPF interface is in, or Area 0"
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfHostEntry 6 }

tmnxOspfIfTable                  OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIfEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfIfTable contains information about the interfaces
         associated with OSPF.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfTable and tmnxOspfNgIfOperTable."
    REFERENCE
        "OSPF Version 2, Appendix C.3 Router interface
         parameters"
    ::= { tmnxOspfObjects 12 }

tmnxOspfIfEntry                  OBJECT-TYPE
    SYNTAX      TmnxOspfIfEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfIfEntry contains information about one interface
         associated with OSPF."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfIfIndex,
        tmnxOspfIfInstId
    }
    ::= { tmnxOspfIfTable 1 }

TmnxOspfIfEntry                  ::= SEQUENCE
{
    tmnxOspfIfIndex                  InterfaceIndex,
    tmnxOspfIfInstId                 TmnxOspfIfInstIdTc,
    tmnxOspfIfStatus                 RowStatus,
    tmnxOspfIfLastChanged            TimeStamp,
    tmnxOspfIfAreaId                 TmnxOspfAreaIdTc,
    tmnxOspfIfCfgType                TmnxOspfIfTypeTc,
    tmnxOspfIfAdminState             Status,
    tmnxOspfIfRtrPriority            DesignatedRouterPriority,
    tmnxOspfIfTransitDelay           TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfIfRetransInterval        TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfIfHelloInterval          HelloRange,
    tmnxOspfIfRtrDeadInterval        TmnxOspfDeadIntRangeTc,
    tmnxOspfIfPollInterval           Unsigned32,
    tmnxOspfIfMulticastForwarding    INTEGER,
    tmnxOspfIfCfgMTU                 Integer32,
    tmnxOspfIfCfgMetric              Metric,
    tmnxOspfIfPassive                TruthValue,
    tmnxOspfIfAdvtSubnet             TruthValue,
    tmnxOspfIfDemand                 TruthValue,
    tmnxOspfIfDemandNbrProbe         TruthValue,
    tmnxOspfIfDemandNbrProbeRetxLimit Unsigned32,
    tmnxOspfIfDemandNbrProbeInterval Unsigned32,
    tmnxOspfIfAuthType               TmnxOspfAuthenticationType,
    tmnxOspfIfAuthKey                OCTET STRING,
    tmnxOspfIfState                  INTEGER,
    tmnxOspfIfLastEnabledTime        TimeStamp,
    tmnxOspfIfOperMTU                Integer32,
    tmnxOspfIfMetricValue            Metric,
    tmnxOspfIfDRId                   TmnxOspfRouterIdTc,
    tmnxOspfIfDRIpAddrType           InetAddressType,
    tmnxOspfIfDRIpAddr               InetAddress,
    tmnxOspfIfBDRId                  TmnxOspfRouterIdTc,
    tmnxOspfIfBDRIpAddrType          InetAddressType,
    tmnxOspfIfBDRIpAddr              InetAddress,
    tmnxOspfIfLinkLsaCount           Gauge32,
    tmnxOspfIfLinkLsaCksumSum        Integer32,
    tmnxOspfIfLinkUnkLsaCount        Gauge32,
    tmnxOspfIfLinkUnkLsaCksumSum     Integer32,
    tmnxOspfIfMD5TransmitKeyId       TmnxOspfIfMD5KeyId,
    tmnxOspfIfLocalIpAddressType     InetAddressType,
    tmnxOspfIfLocalIpAddress         InetAddress,
    tmnxOspfIfMD5NumKeys             Gauge32,
    tmnxOspfIfType                   TmnxOspfIfTypeTc,
    tmnxOspfIfEnableBfd              TruthValue,
    tmnxOspfIfRemainDownOnFail       TruthValue,
    tmnxOspfIfTeMetric               Unsigned32,
    tmnxOspfIfTeState                TmnxOperState,
    tmnxOspfIfAdminGroup             Unsigned32,
    tmnxOspfIfLdpSyncState           TmnxOperState,
    tmnxOspfIfLdpSyncMaxMetric       TruthValue,
    tmnxOspfIfLdpSyncTimerState      INTEGER,
    tmnxOspfIfLdpSyncTimeLeft        Unsigned32,
    tmnxOspfIfInboundSAName          TNamedItemOrEmpty,
    tmnxOspfIfOutboundSAName         TNamedItemOrEmpty,
    tmnxOspfIfOperInbSAName          TNamedItemOrEmpty,
    tmnxOspfIfOperInbSANameTemp      TNamedItemOrEmpty,
    tmnxOspfIfOperOutbSAName         TNamedItemOrEmpty
}

tmnxOspfIfIndex                  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfIndex specifies the interface index of
         this OSPF interface.  It corresponds to the interface index of the
         IP interface on which OSPF is configured."
    ::= { tmnxOspfIfEntry 1 }

tmnxOspfIfInstId                 OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfInstId specifies the OSPF instance.  It
         enables multiple interface instances of OSPF to be run over a
         single link. Each protocol instance would be assigned a separate
         ID. This ID has local link significance only."
    ::= { tmnxOspfIfEntry 2 }

tmnxOspfIfStatus                 OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfStatus controls creation and deletion of a row
         entry in this table."
    ::= { tmnxOspfIfEntry 3 }

tmnxOspfIfLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfIfEntry 4 }

tmnxOspfIfAreaId                 OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAreaId specifies a 32-bit integer uniquely
         identifying the area to which the interface connects. Area ID 0 is
         used for the OSPF backbone."
    DEFVAL      { 0 }
    ::= { tmnxOspfIfEntry 5 }

tmnxOspfIfCfgType                OBJECT-TYPE
    SYNTAX      TmnxOspfIfTypeTc
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfCfgType specifies the OSPF interface type.

         The value of 'unspecified' is never returned in response to a query.
         It is only used in SET requests to reset the interface type to its
         default value based on the underlying physical interface type."
    ::= { tmnxOspfIfEntry 6 }

tmnxOspfIfAdminState             OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAdminState specifies the OSPF interface's
         administrative status.  The value formed on the interface, and the
         interface will be advertised as an internal route to some area.
         The value 'disabled' denotes that the interface is external to OSPF."
    DEFVAL      { enabled }
    ::= { tmnxOspfIfEntry 7 }

tmnxOspfIfRtrPriority            OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRtrPriority specifies the priority of
         this interface.  Used in multi-access networks, this field is
         used in the designated router election algorithm. The value 0
         signifies that the router is not eligible to become the designated
         router on this particular network. In the event of a tie in
         this value, routers will use their Router ID as a tie breaker."
    DEFVAL      { 1 }
    ::= { tmnxOspfIfEntry 8 }

tmnxOspfIfTransitDelay           OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTransitDelay specifies the estimated number of
         seconds it takes to transmit a link state update packet over this
         interface."
    DEFVAL      { 1 }
    ::= { tmnxOspfIfEntry 9 }

tmnxOspfIfRetransInterval        OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRetransInterval specifies the number of seconds
         between link state advertisement retransmissions, for adjacencies
         belonging to this interface. This value is also used when
         retransmitting database description and link state request packets."
    DEFVAL      { 5 }
    ::= { tmnxOspfIfEntry 10 }

tmnxOspfIfHelloInterval          OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfHelloInterval specifies the length of time,
         in seconds, between the Hello packets that the router sends on the
         interface.  This value MUST be the same for all routers attached to
         a common network."
    DEFVAL      { 10 }
    ::= { tmnxOspfIfEntry 11 }

tmnxOspfIfRtrDeadInterval        OBJECT-TYPE
    SYNTAX      TmnxOspfDeadIntRangeTc
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRtrDeadInterval specifies the number of
         seconds that a router's Hello packets have not been seen before
         its neighbors declare the router down on the interface.  This
         should be some multiple of the Hello interval."
    DEFVAL      { 40 }
    ::= { tmnxOspfIfEntry 12 }

tmnxOspfIfPollInterval           OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfPollInterval specifies the larger time
         interval, in seconds, between the Hello packets sent to an inactive
         non-broadcast multi-access neighbor."
    DEFVAL      { 120 }
    ::= { tmnxOspfIfEntry 13 }

tmnxOspfIfMulticastForwarding    OBJECT-TYPE
    SYNTAX      INTEGER {
        blocked   (1),
        multicast (2),
        unicast   (3)
    }
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMulticastForwarding specifies the way
         multicasts should be forwarded on this interface: not forwarded,
         forwarded as data link multicasts, or forwarded as data link
         unicasts.  Data link multicasting is not meaningful on point-to-point
         and NBMA interfaces, and setting tmnxOspfIfMulticastForwarding to 0
         effectively disables all multicast forwarding."
    DEFVAL      { blocked }
    ::= { tmnxOspfIfEntry 14 }

tmnxOspfIfCfgMTU                 OBJECT-TYPE
    SYNTAX      Integer32 (0 | 512..9198)
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfCfgMTU specifies the desired size of the
         largest packet which can be sent/received on this OSPF interface,
         specified in octets. This size DOES include the underlying IP header
         length, but not the underlying layer headers/trailers.

         Setting tmnxOspfIfCfgMTU to a value of zero (0), causes the agent to
         recalculate the default MTU size which can vary based on the current
         setting of tmnxPortMode and tmnxPortEncapType variables for the port
         to which this OSPF interface is bound."
    DEFVAL      { 0 }
    ::= { tmnxOspfIfEntry 15 }

tmnxOspfIfCfgMetric              OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfCfgMetric specifies the desired
         metric value assigned to this interface.  The default value
         '0' causes the value of the Metric to be calculated as
         (Reference Bandwidth / ifSpeed).  The value of the reference
         bandwidth is configured by the tmnxOspfReferenceBandwidth object."
    DEFVAL      { 0 }
    ::= { tmnxOspfIfEntry 16 }

tmnxOspfIfPassive                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfPassive specifies whether or
         or not HELLOs are to be sent out on this interface and
         whether or not the router advertises it as STUB network/link
         in its router LSAs.  If true, no HELLOs will be sent, and the
         interface is advertised as a STUB link."
    DEFVAL      { false }
    ::= { tmnxOspfIfEntry 17 }

tmnxOspfIfAdvtSubnet             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAdvtSubnet specifies the advertisement
         method.  When tmnxOspfIfAdvtSubnet is set to 'true', OSPF will
         advertise the network number and netmask instead of the
         individual host-routes of an active point-to-point interface.
         Setting a value for this object has no effect when tmnxOspfVersion
         has the value 'version3'."
    REFERENCE
        "RFC2328 OSPF Version 2, s12.4.1.1 pg130"
    DEFVAL      { true }
    ::= { tmnxOspfIfEntry 18 }

tmnxOspfIfDemand                 OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDemand specifies whether Demand OSPF procedures
         (hello suppression to FULL neighbors and setting the 'DoNotAge' flag
         on propagated LSAs) should be performed on this OSPF interface."
    DEFVAL      { false }
    ::= { tmnxOspfIfEntry 19 }

tmnxOspfIfDemandNbrProbe         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDemandNbrProbe specifies whether or not
         neighbor probing is enabled to determine whether or not the neighbor
         is inactive. Neighbor probing is disabled by default."
    DEFVAL      { false }
    ::= { tmnxOspfIfEntry 20 }

tmnxOspfIfDemandNbrProbeRetxLimit OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDemandNbrProbeRetxLimit specifies the number of
         consecutive LSA retransmissions before the neighbor is deemed inactive
         and the neighbor adjacency is brought down."
    DEFVAL      { 10 }
    ::= { tmnxOspfIfEntry 21 }

tmnxOspfIfDemandNbrProbeInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDemandNbrProbeInterval specifies how often the
         neighbor will be probed."
    DEFVAL      { 120 }
    ::= { tmnxOspfIfEntry 22 }

tmnxOspfIfAuthType               OBJECT-TYPE
    SYNTAX      TmnxOspfAuthenticationType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAuthType specifies the authentication type to
         use for an interface.

         Note that this object can be used to engage in significant attacks
         against an OSPF router."
    REFERENCE
        "OSPF Version 2, Appendix D Authentication"
    DEFVAL      { none }
    ::= { tmnxOspfIfEntry 23 }

tmnxOspfIfAuthKey                OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..256))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAuthKey specifies the authentication key
         string.  The cleartext password is used as an OSPF Authentication
         key when simplePassword security is enabled. This object does not
         access any OSPF Cryptographic (e.g. MD5) Authentication Key under
         any circumstance.

         If the key length is shorter than 8 octets, the agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot use a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system. This
         authentication is only sufficient to protect against accidental
         misconfigurations because it reuses cleartext passwords. [RFC-1704]

         When read, tmnxOspfIfAuthKey always returns an Octet String of length
         zero.

         This object is valid only when tmnxOspfVersion has a value of
         'version2'."
    REFERENCE
        "OSPF Version 2, Section 9 The Interface Data Structure"
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOspfIfEntry 24 }

tmnxOspfIfState                  OBJECT-TYPE
    SYNTAX      INTEGER {
        down                   (1),
        loopback               (2),
        waiting                (3),
        pointToPoint           (4),
        designatedRouter       (5),
        backupDesignatedRouter (6),
        otherDesignatedRouter  (7)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The OSPF Interface State."
    ::= { tmnxOspfIfEntry 25 }

tmnxOspfIfLastEnabledTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLastEnabledTime indicates the sysUpTime value
         when ospfIfAdminStat was last set to enabled (1) to run the ospf on
         this interface."
    ::= { tmnxOspfIfEntry 26 }

tmnxOspfIfOperMTU                OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfOperMTU indicates the operational size of the
         largest packet which can be sent/received on this OSPF interface,
         specified in octets. This size DOES include the underlying IP header
         length, but not the underlying layer headers/trailers."
    ::= { tmnxOspfIfEntry 27 }

tmnxOspfIfMetricValue            OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMetricValue indicates the metric value
         this interface is using.  The default value of the Metric is
         (Reference Bandwidth / ifSpeed).  The value of the reference
         bandwidth is configured by the tmnxOspfReferenceBandwidth object."
    ::= { tmnxOspfIfEntry 28 }

tmnxOspfIfDRId                   OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDRId indicates the Router ID of the Designated
         Router."
    ::= { tmnxOspfIfEntry 29 }

tmnxOspfIfDRIpAddrType           OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDRIpAddrType type indicates the IP address type
         of tmnxOspfIfDRIpAddr. For IPv6 type addresses only addresses with
         zone index are expected."
    ::= { tmnxOspfIfEntry 30 }

tmnxOspfIfDRIpAddr               OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|20))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDRIpAddr indicates the IP address of the
         Designated Router."
    ::= { tmnxOspfIfEntry 31 }

tmnxOspfIfBDRId                  OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBDRId indicates the Router ID of the Backup
         Designated Router."
    ::= { tmnxOspfIfEntry 32 }

tmnxOspfIfBDRIpAddrType          OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBDRIpAddrType indicates the IP address type of
         the Backup Designated Router. For IPv6 type addresses only addresses
         with zone index are expected."
    ::= { tmnxOspfIfEntry 33 }

tmnxOspfIfBDRIpAddr              OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|20))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBDRIpAddr indicates the IP address of the
         Backup Designated Router."
    ::= { tmnxOspfIfEntry 34 }

tmnxOspfIfLinkLsaCount           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLinkLsaCount indicates the total number of
         Link-Scope link-state advertisements in this link's link-state
         database."
    ::= { tmnxOspfIfEntry 35 }

tmnxOspfIfLinkLsaCksumSum        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLinkLsaCksumSum indicates the 32-bit
         unsigned sum of the Link-Scope link-state advertisements' LS
         checksums contained in this link's link-state database.  The
         sum can be used to determine if there has been a change in a
         router's link-state database, and to compare the link state
         database of two routers."
    ::= { tmnxOspfIfEntry 36 }

tmnxOspfIfLinkUnkLsaCount        OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLinkUnkLsaCount indicates the total number of
         unknown Link-Scope link-state advertisements in this link's link-state
         database."
    ::= { tmnxOspfIfEntry 37 }

tmnxOspfIfLinkUnkLsaCksumSum     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLinkUnkLsaCksumSum indicates the 32-bit
         unsigned sum of the unknown Link-Scope link-state advertisements'
         LS checksums contained in this link's link-state database.  The
         sum can be used to determine if there has been a change in a
         router's link-state database, and to compare the link-state
         database of two routers."
    ::= { tmnxOspfIfEntry 38 }

tmnxOspfIfMD5TransmitKeyId       OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5TransmitKeyId indicates the index value
         used to access the row entry in the tmnxOspfIfMD5KeyTable that
         specifies the authentication type and key transmitted on this
         OSPF interface.  This object is valid only when tmnxOspfVersion
         has the value 'version2'.

         If tmnxOspfIfMD5TransmitKeyId has a value of 0, it means that no keys
         are configured."
    ::= { tmnxOspfIfEntry 39 }

tmnxOspfIfLocalIpAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLocalIpAddressType indicates the IP address
         type of tmnxOspfIfLocalIpAddress. For IPv6 type addresses only
         addresses with zone index are expected."
    ::= { tmnxOspfIfEntry 40 }

tmnxOspfIfLocalIpAddress         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|20))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLocalIpAddress indicates the IP address of this
         OSPF local link interface."
    ::= { tmnxOspfIfEntry 41 }

tmnxOspfIfMD5NumKeys             OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5NumKeys indicates the number of MD5 Key
         entries for this OSPF interface."
    ::= { tmnxOspfIfEntry 42 }

tmnxOspfIfType                   OBJECT-TYPE
    SYNTAX      TmnxOspfIfTypeTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfType indicates the operational OSPF interface
         type."
    ::= { tmnxOspfIfEntry 43 }

tmnxOspfIfEnableBfd              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfEnableBfd specifies whether Bi-directional
         Forwarding Detection is enabled in this OSPF interface.

         When the value is 'true', this interface can establish BFD sessions
         and use BFD as a signalling mechanism. When it is 'false', it cannot
         use BFD."
    DEFVAL      { false }
    ::= { tmnxOspfIfEntry 44 }

tmnxOspfIfRemainDownOnFail       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRemainDownOnFail specifies whether an OSPF
         adjacency should go down when the BFD session to the peer goes down."
    DEFVAL      { false }
    ::= { tmnxOspfIfEntry 45 }

tmnxOspfIfTeMetric               OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTeMetric indicates the MPLS TE metric
         configured for this interface. This metric is flooded out in the TE
         metric sub-tlv in the OSPF TE LSAs. Depending on the configuration,
         either the TE metric value or the native OSPF metric value is used in
         CSPF computations."
    ::= { tmnxOspfIfEntry 46 }

tmnxOspfIfTeState                OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTeState indicates the MPLS interface TE status
         from OSPF standpoint."
    ::= { tmnxOspfIfEntry 47 }

tmnxOspfIfAdminGroup             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAdminGroup indicates the bit-map inherited from
         MPLS interface that identifies the admin groups to which this
         interface belongs. If bit 'n' is set, then the interface belongs to
         the admin group with value 'n'."
    ::= { tmnxOspfIfEntry 48 }

tmnxOspfIfLdpSyncState           OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLdpSyncState indicates if IGP-LDP
         synchronization is enabled on this interface. tmnxOspfIfLdpSyncState
         is derived from tmnxOspfLdpSyncAdminState and also whether it was
         enabled at the IP layer from OSPF standpoint."
    ::= { tmnxOspfIfEntry 49 }

tmnxOspfIfLdpSyncMaxMetric       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLdpSyncMaxMetric indicates if OSPF advertised
         maximum metric value for the interface, depending on whether
         tmnxOspfIfLdpSyncState is enabled on this interface."
    ::= { tmnxOspfIfEntry 50 }

tmnxOspfIfLdpSyncTimerState      OBJECT-TYPE
    SYNTAX      INTEGER {
        waitForLdpAdj (1),
        timerActive   (2),
        ldpExchgDone  (3),
        timerExpired  (4),
        manualExit    (5),
        disabled      (6)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLdpSyncTimerState indicates the state of the
         tmnxOspfIfLdpSyncTimeLeft on this OSPF interface."
    ::= { tmnxOspfIfEntry 51 }

tmnxOspfIfLdpSyncTimeLeft        OBJECT-TYPE
    SYNTAX      Unsigned32 (0..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLdpSyncTimeLeft indicates the time left before
         OSPF reverts back to advertising normal metric for this interface.
         This is applicable only when tmnxOspfIfLdpSyncMaxMetric is 'true'."
    ::= { tmnxOspfIfEntry 52 }

tmnxOspfIfInboundSAName          OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfInboundSAName specifies the manually configured
         IPsec Security Association name in case the Ospfv3 traffic on the
         [interface] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfIfEntry 53 }

tmnxOspfIfOutboundSAName         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfOutboundSAName specifies the manually
         configured IPsec Security Association name in case the Ospfv3 traffic
         on the [interface] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfIfEntry 54 }

tmnxOspfIfOperInbSAName          OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfOperInbSAName indicates the name of the
         operational inbound manual IPsec Security Association, used for
         authenticating inbound Ospfv3 traffic."
    DEFVAL      { ''H }
    ::= { tmnxOspfIfEntry 55 }

tmnxOspfIfOperInbSANameTemp      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfOperInbSANameTemp indicates the name of a
         temporary operational inbound manual IPsec Security Association, used
         for authenticating inbound Ospfv3 traffic.

         This field can only contain a value when the key-rollover mechanism is
         ongoing."
    DEFVAL      { ''H }
    ::= { tmnxOspfIfEntry 56 }

tmnxOspfIfOperOutbSAName         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfOperOutbSAName indicates the name of the
         operational outbound manual IPsec Security Association, used for
         authenticating outbound Ospfv3 traffic. When the key-rollover
         mechanism is ongoing, the value can temporarily be different from the
         value of the tmnxOspfIfOutboundSAName field."
    DEFVAL      { ''H }
    ::= { tmnxOspfIfEntry 57 }

tmnxOspfIfStatsTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfIfStatsTable provides an extension of the tmnxOspfIfTable
         for statistics for an OSPF interface.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfStatsTable"
    ::= { tmnxOspfObjects 13 }

tmnxOspfIfStatsEntry             OBJECT-TYPE
    SYNTAX      TmnxOspfIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Each row entry in the tmnxOspfIfStatsTable represents additional
         columns for statistics for an OSPF interface."
    AUGMENTS    { tmnxOspfIfEntry }
    ::= { tmnxOspfIfStatsTable 1 }

TmnxOspfIfStatsEntry             ::= SEQUENCE
{
    tmnxOspfIfEvents                 Counter32,
    tmnxOspfIfTxPackets              Counter32,
    tmnxOspfIfTxHellos               Counter32,
    tmnxOspfIfTxDBDs                 Counter32,
    tmnxOspfIfTxLSRs                 Counter32,
    tmnxOspfIfTxLSUs                 Counter32,
    tmnxOspfIfTxLSAcks               Counter32,
    tmnxOspfIfRxPackets              Counter32,
    tmnxOspfIfRxHellos               Counter32,
    tmnxOspfIfRxDBDs                 Counter32,
    tmnxOspfIfRxLSRs                 Counter32,
    tmnxOspfIfRxLSUs                 Counter32,
    tmnxOspfIfRxLSAcks               Counter32,
    tmnxOspfIfDiscardPackets         Counter32,
    tmnxOspfIfRetransmitOuts         Counter32,
    tmnxOspfIfBadVersions            Counter32,
    tmnxOspfIfBadNetworks            Counter32,
    tmnxOspfIfBadVirtualLinks        Counter32,
    tmnxOspfIfBadAreas               Counter32,
    tmnxOspfIfBadDstAddrs            Counter32,
    tmnxOspfIfBadNeighbors           Counter32,
    tmnxOspfIfBadPacketTypes         Counter32,
    tmnxOspfIfNeighborCount          Integer32,
    tmnxOspfIfLastEventTime          TimeStamp,
    tmnxOspfIfBadLengths             Counter32,
    tmnxOspfIfBadHelloIntervals      Counter32,
    tmnxOspfIfBadDeadIntervals       Counter32,
    tmnxOspfIfBadOptions             Counter32,
    tmnxOspfIfRxBadChecksums         Counter32,
    tmnxOspfIfBadAuthTypes           Counter32,
    tmnxOspfIfAuthFailures           Counter32
}

tmnxOspfIfEvents                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfEvents indicates the number of times this OSPF
         interface has changed its state, or an error has occurred."
    ::= { tmnxOspfIfStatsEntry 1 }

tmnxOspfIfTxPackets              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxPackets indicates the total number of OSPF
         packets transmitted on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 2 }

tmnxOspfIfTxHellos               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxHellos indicates the total number of OSPF
         Hello packets transmitted on this interface since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 3 }

tmnxOspfIfTxDBDs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxDBDs indicates the total number of OSPF
         Database Description packets transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 4 }

tmnxOspfIfTxLSRs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxLSRs indicates the total number of OSPF Link
         State Requests (LSRs)transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 5 }

tmnxOspfIfTxLSUs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxLSUs indicates the total number of OSPF Link
         State Updates (LSUs) transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 6 }

tmnxOspfIfTxLSAcks               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfTxLSAcks indicates the total number of OSPF
         Link State Acknowledgements transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 7 }

tmnxOspfIfRxPackets              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxPackets indicates the total number of OSPF
         packets received on this interface since tmnxOspfAdminState was last
         set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 8 }

tmnxOspfIfRxHellos               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxHellos indicates the total number of OSPF
         Hello packets received on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 9 }

tmnxOspfIfRxDBDs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxDBDs indicates the total number of
         OSPF Database Description packets  received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 10 }

tmnxOspfIfRxLSRs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxLSRs indicates the total number of Link State
         Requests (LSRs) received on this interface since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 11 }

tmnxOspfIfRxLSUs                 OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxLSUs indicates the total number of Link State
         Updates (LSUs) received on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 12 }

tmnxOspfIfRxLSAcks               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxLSAcks indicates the total number of Link
         State Acknowledgements received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 13 }

tmnxOspfIfDiscardPackets         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfDiscardPackets indicates the total number of
         OSPF packets discarded on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 14 }

tmnxOspfIfRetransmitOuts         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRetransmitOuts indicates the total number of
         OSPF Retransmits sent on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 15 }

tmnxOspfIfBadVersions            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadVersions indicates the total number of OSPF
         packets received with bad OSPF version numbers since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 16 }

tmnxOspfIfBadNetworks            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadNetworks indicates the total number of OSPF
         packets received with invalid network or mask since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 17 }

tmnxOspfIfBadVirtualLinks        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadVirtualLinks indicates the total number of
         OSPF packets received on this interface that are destined to a virtual
         link that does not exist since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfIfStatsEntry 18 }

tmnxOspfIfBadAreas               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadAreas indicates the total number of OSPF
         packets received with an area mismatch since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 19 }

tmnxOspfIfBadDstAddrs            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadDstAddrs indicates the total number of OSPF
         packets received with the incorrect IP destination address since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 20 }

tmnxOspfIfBadNeighbors           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadNeighbors indicates the total number of OSPF
         packets received where the neighbor information does not match the
         information this router has for the neighbor since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 21 }

tmnxOspfIfBadPacketTypes         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadPacketTypes indicates the total number of
         OSPF packets received with an invalid OSPF packet type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 22 }

tmnxOspfIfNeighborCount          OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfNeighborCount indicates the total number of
         OSPF neighbors adjacent on this interface, in a state of INIT or
         greater, since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 23 }

tmnxOspfIfLastEventTime          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfLastEventTime indicates the value of sysUpTime
         when an event was last associated with this OSPF interface."
    ::= { tmnxOspfIfStatsEntry 24 }

tmnxOspfIfBadLengths             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadLengths indicates the total number of OSPF
         packets received on this interface with a total length not equal to
         the length given in the packet itself since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 25 }

tmnxOspfIfBadHelloIntervals      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadHelloIntervals indicates the total number of
         OSPF packets received where the hello interval given in packet was not
         equal to that configured on this interface since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 26 }

tmnxOspfIfBadDeadIntervals       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadDeadIntervals indicates the total number of
         OSPF packets received where the dead interval given in the packet was
         not equal to that configured on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 27 }

tmnxOspfIfBadOptions             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadOptions indicates the total number of OSPF
         packets received with an option that does not match those configured
         for this interface or area since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfIfStatsEntry 28 }

tmnxOspfIfRxBadChecksums         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfRxBadChecksums indicates the count of LSAs
         received with bad checksums."
    ::= { tmnxOspfIfStatsEntry 29 }

tmnxOspfIfBadAuthTypes           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfBadAuthTypes indicates the total number of OSPF
         packets received with an invalid authorization type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 30 }

tmnxOspfIfAuthFailures           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfAuthFailures indicates the total number of OSPF
         packets received with an invalid authorization key since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfIfStatsEntry 31 }

tmnxOspfVirtIfTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfVirtIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtIfTable contains information about this router's
         virtual interfaces."
    REFERENCE
        "OSPF Version 2, Appendix C.4 Virtual link
         parameters"
    ::= { tmnxOspfObjects 14 }

tmnxOspfVirtIfEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfVirtIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtIfEntry contains information about a single Virtual
         Interface."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfVirtIfAreaId,
        tmnxOspfVirtIfNeighbor
    }
    ::= { tmnxOspfVirtIfTable 1 }

TmnxOspfVirtIfEntry              ::= SEQUENCE
{
    tmnxOspfVirtIfAreaId             TmnxOspfAreaIdTc,
    tmnxOspfVirtIfNeighbor           TmnxOspfRouterIdTc,
    tmnxOspfVirtIfStatus             RowStatus,
    tmnxOspfVirtIfLastChanged        TimeStamp,
    tmnxOspfVirtIfIndex              InterfaceIndex,
    tmnxOspfVirtIfInstId             TmnxOspfIfInstIdTc,
    tmnxOspfVirtIfAdminStat          Status,
    tmnxOspfVirtIfTransitDelay       TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfVirtIfRetransInterval    TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfVirtIfHelloInterval      HelloRange,
    tmnxOspfVirtIfRtrDeadInterval    TmnxOspfDeadIntRangeTc,
    tmnxOspfVirtIfAuthType           TmnxOspfAuthenticationType,
    tmnxOspfVirtIfAuthKey            OCTET STRING,
    tmnxOspfVirtIfState              INTEGER,
    tmnxOspfVirtIfLastEnabledTime    TimeStamp,
    tmnxOspfVirtIfCost               Metric,
    tmnxOspfVirtIfLinkLsaCount       Gauge32,
    tmnxOspfVirtIfLinkLsaCksumSum    Integer32,
    tmnxOspfVirtIfLinkUnkLsaCount    Gauge32,
    tmnxOspfVirtIfLinkUnkLsaCksumSum Integer32,
    tmnxOspfVirtIfMD5TransmitKeyId   TmnxOspfIfMD5KeyId,
    tmnxOspfVirtIfLocalIpAddrType    InetAddressType,
    tmnxOspfVirtIfLocalIpAddress     InetAddress,
    tmnxOspfVirtIfMD5NumKeys         Gauge32,
    tmnxOspfVirtIfInboundSAName      TNamedItemOrEmpty,
    tmnxOspfVirtIfOutboundSAName     TNamedItemOrEmpty,
    tmnxOspfVirtIfOperInbSAName      TNamedItemOrEmpty,
    tmnxOspfVirtIfOperInbSANameTemp  TNamedItemOrEmpty,
    tmnxOspfVirtIfOperOutbSAName     TNamedItemOrEmpty,
    tmnxOspfVirtIfAuthKeyChain       TNamedItemOrEmpty
}

tmnxOspfVirtIfAreaId             OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAreaId specifies the Transit Area
         that the Virtual Link traverses.  By definition, this is not
         Area 0."
    ::= { tmnxOspfVirtIfEntry 1 }

tmnxOspfVirtIfNeighbor           OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfNeighbor specifies the Router ID of the
         Virtual Neighbor."
    ::= { tmnxOspfVirtIfEntry 2 }

tmnxOspfVirtIfStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfStatus controls creation and deletion or a
         row entry in this table."
    ::= { tmnxOspfVirtIfEntry 3 }

tmnxOspfVirtIfLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfVirtIfEntry 4 }

tmnxOspfVirtIfIndex              OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfIndex specifies the interface index
         assigned to this OSPF virtual interface.  It is advertised in
         Hello's sent over the virtual link and in the router's router-LSAs."
    ::= { tmnxOspfVirtIfEntry 5 }

tmnxOspfVirtIfInstId             OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfInstId specifies the interface instance
         ID to be used for the virtual interface.  This ID has local link
         significance only."
    DEFVAL      { 0 }
    ::= { tmnxOspfVirtIfEntry 6 }

tmnxOspfVirtIfAdminStat          OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAdminStat specifies the desired
         administrative state of OSPF on this virtual interface."
    DEFVAL      { disabled }
    ::= { tmnxOspfVirtIfEntry 7 }

tmnxOspfVirtIfTransitDelay       OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTransitDelay specifies the estimated number
         of seconds it takes to transmit a link-state update packet over this
         interface."
    DEFVAL      { 1 }
    ::= { tmnxOspfVirtIfEntry 8 }

tmnxOspfVirtIfRetransInterval    OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRetransInterval specifies the number
         of seconds between link-state advertisement retransmissions, for
         adjacencies belonging to this interface.  This value is also used
         when retransmitting database description and link-state request
         packets.  This value should be well over the expected round-trip
         time."
    DEFVAL      { 5 }
    ::= { tmnxOspfVirtIfEntry 9 }

tmnxOspfVirtIfHelloInterval      OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfHelloInterval specifies the length of
         time, in seconds, between the Hello packets that the router sends
         on the interface.  This value MUST be the same for the virtual
         neighbor."
    DEFVAL      { 10 }
    ::= { tmnxOspfVirtIfEntry 10 }

tmnxOspfVirtIfRtrDeadInterval    OBJECT-TYPE
    SYNTAX      TmnxOspfDeadIntRangeTc
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRtrDeadInterval specifies the number
         of seconds that a router's Hello packets have not been seen before
         its neighbors declare the router down.  This should be some multiple
         of the Hello interval.  This value MUST be the same for the virtual
         neighbor."
    DEFVAL      { 60 }
    ::= { tmnxOspfVirtIfEntry 11 }

tmnxOspfVirtIfAuthType           OBJECT-TYPE
    SYNTAX      TmnxOspfAuthenticationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAuthType specifies the authentication type
         to use for an interface.

         Note that this object can be used to engage in significant attacks
         against an OSPF router."
    REFERENCE
        "OSPF Version 2, Appendix D Authentication"
    DEFVAL      { none }
    ::= { tmnxOspfVirtIfEntry 12 }

tmnxOspfVirtIfAuthKey            OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..256))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAuthKey specifies the authentication key
         string.  The cleartext password is used as an OSPF Authentication
         key when simplePassword security is enabled. This object does not
         access any OSPF Cryptographic (e.g. MD5) Authentication Key under
         any circumstance.

         If the key length is shorter than 8 octets, the agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot use a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system. This
         authentication is only sufficient to protect against accidental
         misconfigurations because it reuses cleartext passwords. [RFC-1704]

         When read, tmnxOspfVirtIfAuthKey always returns an Octet String of
         length zero.

         This object is valid only when tmnxOspfVersion has a value of
         'version2'."
    REFERENCE
        "OSPF Version 2, Section 9 The Interface Data Structure"
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOspfVirtIfEntry 13 }

tmnxOspfVirtIfState              OBJECT-TYPE
    SYNTAX      INTEGER {
        down         (1),
        pointToPoint (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfState indicates the operational state of
         this virtual interface."
    ::= { tmnxOspfVirtIfEntry 14 }

tmnxOspfVirtIfLastEnabledTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLastEnabledTime indicates the sysUpTime
         value when this entry row entry was enabled."
    ::= { tmnxOspfVirtIfEntry 15 }

tmnxOspfVirtIfCost               OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfCost indicates the OSPF virtual interface
         cost represents the cost to traverse the transit area to the adjacent
         router. If multiple routes are available the lowest cost link will be
         used to maintain the adjacency and route traffic across the transit
         area."
    ::= { tmnxOspfVirtIfEntry 16 }

tmnxOspfVirtIfLinkLsaCount       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLinkLsaCount indicates the total number of
         Link-Scope link-state advertisements in this virtual link's link-state
         database."
    ::= { tmnxOspfVirtIfEntry 17 }

tmnxOspfVirtIfLinkLsaCksumSum    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLinkLsaCksumSum indicates the 32-bit
         unsigned sum of the Link-Scope link-state advertisements' LS checksums
         contained in this virtual link's link-state database. The sum can be
         used to determine if there has been a change in a router's link-state
         database, and to compare the link-state database of two routers."
    ::= { tmnxOspfVirtIfEntry 18 }

tmnxOspfVirtIfLinkUnkLsaCount    OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLinkUnkLsaCount indicates the total number
         of unknown Link-Scope link-state advertisements in this virtual link's
         link-state database."
    ::= { tmnxOspfVirtIfEntry 19 }

tmnxOspfVirtIfLinkUnkLsaCksumSum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLinkUnkLsaCksumSum indicates the
         32-bit unsigned sum of the unknown Link-Scope link-state
         advertisements' LS checksums contained in this virtual link's
         link-state database.  The sum can be used to determine if there
         has been a change in a router's link state database, and to
         compare the link-state database of two routers."
    ::= { tmnxOspfVirtIfEntry 20 }

tmnxOspfVirtIfMD5TransmitKeyId   OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5TransmitKeyId indicates the index value
         used to access the row entry in the tmnxOspfVirtIfMD5KeyTable that
         specifies the authentication type and key transmitted on this
         OSPF virtual interface.  This object is valid only when
         tmnxOspfVersion has the value 'version2'.

         If tmnxOspfVirtIfMD5TransmitKeyId has a value of 0, it means that no
         keys are configured."
    ::= { tmnxOspfVirtIfEntry 21 }

tmnxOspfVirtIfLocalIpAddrType    OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLocalIpAddrType type indicates the IP
         address type of tmnxOspfVirtIfLocalIpAddress. For IPv6 type addresses
         only addresses without zone index are expected."
    ::= { tmnxOspfVirtIfEntry 22 }

tmnxOspfVirtIfLocalIpAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLocalIpAddress indicates the IP address
         of the local egress interface that is used to  maintain the
         adjacency to reach this virtual neighbor."
    ::= { tmnxOspfVirtIfEntry 23 }

tmnxOspfVirtIfMD5NumKeys         OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5NumKeys indicates the number of MD5 Key
         entries for this OSPF virtual interface."
    ::= { tmnxOspfVirtIfEntry 24 }

tmnxOspfVirtIfInboundSAName      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfInboundSAName specifies the manually
         configured IPsec Security Association name in case the Ospfv3 traffic
         on the [virtual link] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 25 }

tmnxOspfVirtIfOutboundSAName     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfOutboundSAName specifies the manually
         configured IPsec Security Association name in case the Ospfv3 traffic
         on the [virtual link] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 26 }

tmnxOspfVirtIfOperInbSAName      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfOperInbSAName indicates the name of the
         operational inbound manual IPsec Security Association, used for
         authenticating inbound Ospfv3 traffic."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 27 }

tmnxOspfVirtIfOperInbSANameTemp  OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfOperInbSANameTemp indicates the name of a
         temporary operational inbound manual IPsec Security Association, used
         for authenticating inbound Ospfv3 traffic.

         This field can only contain a value when the key-rollover mechanism is
         ongoing."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 28 }

tmnxOspfVirtIfOperOutbSAName     OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfOperOutbSAName indicates the name of the
         operational outbound manual IPsec Security Association, used for
         authenticating outbound Ospfv3 traffic. When the key-rollover
         mechanism is ongoing, the value can temporarily be different from the
         value of the tmnxOspfVirtIfOutboundSAName field."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 29 }

tmnxOspfVirtIfAuthKeyChain       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAuthKeyChain specifies the keychain which
         will be used to sign and/or authenticate the OSPF protocol stream.

         The keychain name is defined by tmnxKeyChainName and is the index for
         TIMETRA-SECURITY-MIB::tmnxKeyChainTable."
    DEFVAL      { ''H }
    ::= { tmnxOspfVirtIfEntry 30 }

tmnxOspfVirtIfStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfVirtIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtIfStatsTable provides an extension of the
         tmnxOspfVirtIfTable for statistics for an OSPF virtual interface."
    ::= { tmnxOspfObjects 15 }

tmnxOspfVirtIfStatsEntry         OBJECT-TYPE
    SYNTAX      TmnxOspfVirtIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfVirtIfStatsTable represents additional
         columns for statistics for an OSPF virtual interface."
    AUGMENTS    { tmnxOspfVirtIfEntry }
    ::= { tmnxOspfVirtIfStatsTable 1 }

TmnxOspfVirtIfStatsEntry         ::= SEQUENCE
{
    tmnxOspfVirtIfEvents             Counter32,
    tmnxOspfVirtIfTxPackets          Counter32,
    tmnxOspfVirtIfTxHellos           Counter32,
    tmnxOspfVirtIfTxDBDs             Counter32,
    tmnxOspfVirtIfTxLSRs             Counter32,
    tmnxOspfVirtIfTxLSUs             Counter32,
    tmnxOspfVirtIfTxLSAcks           Counter32,
    tmnxOspfVirtIfRxPackets          Counter32,
    tmnxOspfVirtIfRxHellos           Counter32,
    tmnxOspfVirtIfRxDBDs             Counter32,
    tmnxOspfVirtIfRxLSRs             Counter32,
    tmnxOspfVirtIfRxLSUs             Counter32,
    tmnxOspfVirtIfRxLSAcks           Counter32,
    tmnxOspfVirtIfDiscardPackets     Counter32,
    tmnxOspfVirtIfRetransmitOuts     Counter32,
    tmnxOspfVirtIfBadVersions        Counter32,
    tmnxOspfVirtIfBadNetworks        Counter32,
    tmnxOspfVirtIfBadAreas           Counter32,
    tmnxOspfVirtIfBadDstAddrs        Counter32,
    tmnxOspfVirtIfBadNeighbors       Counter32,
    tmnxOspfVirtIfBadPacketTypes     Counter32,
    tmnxOspfVirtIfLastEventTime      TimeStamp,
    tmnxOspfVirtIfBadLengths         Counter32,
    tmnxOspfVirtIfBadHelloIntervls   Counter32,
    tmnxOspfVirtIfBadDeadIntervals   Counter32,
    tmnxOspfVirtIfBadOptions         Counter32,
    tmnxOspfVirtIfRxBadChecksums     Counter32,
    tmnxOspfVirtIfBadAuthTypes       Counter32,
    tmnxOspfVirtIfAuthFailures       Counter32
}

tmnxOspfVirtIfEvents             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfEvents indicates the number of state
         changes or error events on this Virtual Link"
    ::= { tmnxOspfVirtIfStatsEntry 1 }

tmnxOspfVirtIfTxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxPackets indicates the total number of
         OSPF packets transmitted on this virtual interface since it was
         created."
    ::= { tmnxOspfVirtIfStatsEntry 2 }

tmnxOspfVirtIfTxHellos           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxHellos indicates the total number of OSPF
         Hello packets transmitted on this virtual interface since it was
         created."
    ::= { tmnxOspfVirtIfStatsEntry 3 }

tmnxOspfVirtIfTxDBDs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxDBDs indicates the total number of OSPF
         Database Description packets transmitted on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 4 }

tmnxOspfVirtIfTxLSRs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxLSRs indicates the total number of OSPF
         Link State Requests (LSRs) transmitted on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 5 }

tmnxOspfVirtIfTxLSUs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxLSUs indicates the total number of OSPF
         Link State Updates (LSUs) transmitted on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 6 }

tmnxOspfVirtIfTxLSAcks           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfTxLSAcks indicates the total number of OSPF
         Link State Acknowledgements transmitted on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 7 }

tmnxOspfVirtIfRxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxPackets indicates the total number of
         OSPF packets received on this virtual interface since it was created."
    ::= { tmnxOspfVirtIfStatsEntry 8 }

tmnxOspfVirtIfRxHellos           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxHellos indicates the total number of OSPF
         Hello packets received on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 9 }

tmnxOspfVirtIfRxDBDs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxDBDs indicates the total number of OSPF
         Database Description packets received on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 10 }

tmnxOspfVirtIfRxLSRs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxLSRs indicates the total number of OSPF
         Link State Requests (LSRs) received on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 11 }

tmnxOspfVirtIfRxLSUs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxLSUs indicates the total number of OSPF
         Link State Updates (LSUs) received on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 12 }

tmnxOspfVirtIfRxLSAcks           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxLSAcks indicates the total number of Link
         State Acknowledgements received on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 13 }

tmnxOspfVirtIfDiscardPackets     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfDiscardPackets indicates the total number
         of OSPF packets discarded on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 14 }

tmnxOspfVirtIfRetransmitOuts     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRetransmitOuts indicates the total number
         of OSPF packets retransmitted on this virtual interface."
    ::= { tmnxOspfVirtIfStatsEntry 15 }

tmnxOspfVirtIfBadVersions        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadVersions indicates the total number of
         OSPF packets received on this virtual interface with invalid OSPF
         version numbers."
    ::= { tmnxOspfVirtIfStatsEntry 16 }

tmnxOspfVirtIfBadNetworks        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadNetworks indicates the total number of
         OSPF packets received on this virtual interface with invalid network
         or mask fields."
    ::= { tmnxOspfVirtIfStatsEntry 17 }

tmnxOspfVirtIfBadAreas           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadAreas indicates the total number of OSPF
         packets received on this virtual interface with area mismatches."
    ::= { tmnxOspfVirtIfStatsEntry 18 }

tmnxOspfVirtIfBadDstAddrs        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadDstAddrs indicates the total number of
         OSPF packets received on this virtual interface with invalid
         destination IP address."
    ::= { tmnxOspfVirtIfStatsEntry 19 }

tmnxOspfVirtIfBadNeighbors       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadNeighbors indicates the total number of
         OSPF packets received where the neighbor information does not match
         the configuration this router has for the neighbor."
    ::= { tmnxOspfVirtIfStatsEntry 20 }

tmnxOspfVirtIfBadPacketTypes     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadPacketTypes indicates the total number
         of OSPF packets received on this virtual interface with invalid OSPF
         packet types."
    ::= { tmnxOspfVirtIfStatsEntry 21 }

tmnxOspfVirtIfLastEventTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfLastEventTime indicates the value of
         sysUpTime when an event was last associated with this OSPF virtual
         interface."
    ::= { tmnxOspfVirtIfStatsEntry 22 }

tmnxOspfVirtIfBadLengths         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadLengths indicates the total number of
         OSPF packets received on this virtual interface with a total length
         not equal to the length given in the packet itself since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtIfStatsEntry 23 }

tmnxOspfVirtIfBadHelloIntervls   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadHelloIntervls indicates the total
         number  of OSPF packets received where the hello interval given
         in packet was not equal to that configured on this virtual
         interface since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtIfStatsEntry 24 }

tmnxOspfVirtIfBadDeadIntervals   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadDeadIntervals indicates the total number
         of OSPF packets received where the dead interval given in the packet
         was not equal to that configured on this virtual interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtIfStatsEntry 25 }

tmnxOspfVirtIfBadOptions         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadOptions indicates the total number of
         OSPF packets received with an option that does not match those
         configured for this virtual interface or transit-area since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtIfStatsEntry 26 }

tmnxOspfVirtIfRxBadChecksums     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfRxBadChecksums indicates the count of LSAs
         received with bad checksums."
    ::= { tmnxOspfVirtIfStatsEntry 27 }

tmnxOspfVirtIfBadAuthTypes       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfBadAuthTypes indicates the total number of
         OSPF packets received on this virtual interface with invalid
         authentication types."
    ::= { tmnxOspfVirtIfStatsEntry 28 }

tmnxOspfVirtIfAuthFailures       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfAuthFailures indicates the total number of
         OSPF packets received on this virtual interface with invalid
         authentication keys."
    ::= { tmnxOspfVirtIfStatsEntry 29 }

tmnxOspfNbrTable                 OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfNbrTable contains information about non-virtual neighbors.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgNbrTable."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data
         Structure"
    ::= { tmnxOspfObjects 16 }

tmnxOspfNbrEntry                 OBJECT-TYPE
    SYNTAX      TmnxOspfNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfNbrEntry contains information regarding a single
         non-virtual neighbor."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data
         Structure"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNbrIfIndex,
        tmnxOspfNbrIfInstId,
        tmnxOspfNbrRtrId
    }
    ::= { tmnxOspfNbrTable 1 }

TmnxOspfNbrEntry                 ::= SEQUENCE
{
    tmnxOspfNbrIfIndex               InterfaceIndex,
    tmnxOspfNbrIfInstId              TmnxOspfIfInstIdTc,
    tmnxOspfNbrRtrId                 TmnxOspfRouterIdTc,
    tmnxOspfNbrAddressType           InetAddressType,
    tmnxOspfNbrAddress               InetAddress,
    tmnxOspfNbrOptions               Integer32,
    tmnxOspfNbrPriority              DesignatedRouterPriority,
    tmnxOspfNbrState                 INTEGER,
    tmnxOspfNbrHelloSuppressed       TruthValue,
    tmnxOspfNbrIfId                  InterfaceIndexOrZero,
    tmnxOspfNbrRestartHelperStatus   INTEGER,
    tmnxOspfNbrRestartHelperAge      TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfNbrRestartHelperExitRc   INTEGER,
    tmnxOspfNbrUpTime                TimeInterval,
    tmnxOspfNbrLastEventTime         TimeStamp,
    tmnxOspfNbrDeadTimeOutstanding   Unsigned32,
    tmnxOspfNbrLastRestartTime       TimeStamp,
    tmnxOspfNbrRestartReason         TmnxOspfRestartReasonTc,
    tmnxOspfNbrBfdTracking           TruthValue,
    tmnxOspfNbrDrId                  TmnxOspfRouterIdTc,
    tmnxOspfNbrBdrId                 TmnxOspfRouterIdTc
}

tmnxOspfNbrIfIndex               OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrIfIndex specifies the local link ID of the
         link over which the neighbor can be reached."
    ::= { tmnxOspfNbrEntry 1 }

tmnxOspfNbrIfInstId              OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrIfInstId specifies the interface instance
         over which the neighbor can be reached.  This ID has local link
         significance only."
    ::= { tmnxOspfNbrEntry 2 }

tmnxOspfNbrRtrId                 OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrRtrId specifies a 32-bit integer uniquely
         identifying the neighboring router in the Autonomous System."
    ::= { tmnxOspfNbrEntry 3 }

tmnxOspfNbrAddressType           OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrAddressType indicates the address type of
         tmnxOspfNbrAddress. For addresses of IPv6 type only addresses with
         zone index are expected."
    ::= { tmnxOspfNbrEntry 4 }

tmnxOspfNbrAddress               OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|20))
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrAddress indicates the IP address of the
         neighbor associated with the local link."
    ::= { tmnxOspfNbrEntry 5 }

tmnxOspfNbrOptions               OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrOptions indicates a Bit Mask corresponding to
         the neighbor's options field."
    REFERENCE
        "OSPF Version 3, Appendix A.2 the Options field"
    ::= { tmnxOspfNbrEntry 6 }

tmnxOspfNbrPriority              OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrPriority indicates the priority of this
         neighbor in the designated router election algorithm.  The value
         0 signifies that the neighbor is not eligible to become the
         designated router on this particular network."
    ::= { tmnxOspfNbrEntry 7 }

tmnxOspfNbrState                 OBJECT-TYPE
    SYNTAX      INTEGER {
        down          (1),
        attempt       (2),
        init          (3),
        twoWay        (4),
        exchangeStart (5),
        exchange      (6),
        loading       (7),
        full          (8)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrState indicates the State of the relationship
         with this Neighbor."
    REFERENCE
        "OSPF Version 2, Section 10.1 Neighbor States"
    ::= { tmnxOspfNbrEntry 8 }

tmnxOspfNbrHelloSuppressed       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrHelloSuppressed indicates whether Hellos are
         being suppressed to the neighbor."
    ::= { tmnxOspfNbrEntry 9 }

tmnxOspfNbrIfId                  OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrIfId indicates the interface ID that the
         neighbor advertises in its Hello Packets on this link, that is, the
         neighbor's local interface index."
    ::= { tmnxOspfNbrEntry 10 }

tmnxOspfNbrRestartHelperStatus   OBJECT-TYPE
    SYNTAX      INTEGER {
        notHelping (1),
        helping    (2)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrRestartHelperStatus indicates whether the
         router is acting as a Graceful restart helper for the neighbor."
    ::= { tmnxOspfNbrEntry 11 }

tmnxOspfNbrRestartHelperAge      OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrRestartHelperAge indicates the remaining time
         in the current OSPF Graceful restart interval, if the router is acting
         as a restart helper for the neighbor."
    ::= { tmnxOspfNbrEntry 12 }

tmnxOspfNbrRestartHelperExitRc   OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        inProgress      (2),
        completed       (3),
        timedOut        (4),
        topologyChanged (5)
    }
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrRestartHelperExitRc indicates the outcome of
         the last attempt at acting as a Graceful restart helper for the
         neighbor.

              none             No restart has yet been attempted.
              inProgress       A restart attempt is currently underway.
              completed        The last restart completed successfully.
              timedOut         The last restart timed out.
              topologyChanged  The last restart was aborted due to
                               a topology change."
    ::= { tmnxOspfNbrEntry 13 }

tmnxOspfNbrUpTime                OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrUpTime indicates the uninterrupted time, in
         hundredths of seconds, the adjacency to this neighbour has been up."
    ::= { tmnxOspfNbrEntry 14 }

tmnxOspfNbrLastEventTime         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrLastEventTime indicates the value of sysUpTime
         when the last event occurred that affected the adjacency to the
         neighbour."
    ::= { tmnxOspfNbrEntry 15 }

tmnxOspfNbrDeadTimeOutstanding   OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrDeadTimeOutstanding indicates the amount
         of time in seconds until the  dead-router interval expires. Normally,
         this value should not be significantly smaller than the configured
         dead router interval minus one hello interval."
    ::= { tmnxOspfNbrEntry 16 }

tmnxOspfNbrLastRestartTime       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrLastRestartTime indicates the last time the
         neighbor attempted restart."
    ::= { tmnxOspfNbrEntry 17 }

tmnxOspfNbrRestartReason         OBJECT-TYPE
    SYNTAX      TmnxOspfRestartReasonTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrRestartReason indicates the OSPF neighbor's
         graceful restart reason."
    ::= { tmnxOspfNbrEntry 18 }

tmnxOspfNbrBfdTracking           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBfdTracking indicates whether a BFD session is
         being maintained to track the forwarding path to this neighbor or not."
    ::= { tmnxOspfNbrEntry 19 }

tmnxOspfNbrDrId                  OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrDrId indicates the DR value advertised in the
         HELLO packets received from the OSPF neighbor. If it is not a
         broadcast interface tmnxOspfNbrDrId will be zero."
    ::= { tmnxOspfNbrEntry 20 }

tmnxOspfNbrBdrId                 OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBdrId indicates the BDR value advertised in
         the HELLO packets received from the OSPF neighbor. If it is not a
         broadcast interface tmnxOspfNbrBdrId will be zero."
    ::= { tmnxOspfNbrEntry 21 }

tmnxOspfNbrStatsTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfNbrStatsTable provides an extension of the
         tmnxOspfNbrTable for statistics for an OSPF neighbor.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgNbrStatsTable."
    ::= { tmnxOspfObjects 17 }

tmnxOspfNbrStatsEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Each row entry in the tmnxOspfNbrStatsTable represents additional
         columns for statistics for an OSPF neighbor."
    AUGMENTS    { tmnxOspfNbrEntry }
    ::= { tmnxOspfNbrStatsTable 1 }

TmnxOspfNbrStatsEntry            ::= SEQUENCE
{
    tmnxOspfNbrEvents                Counter32,
    tmnxOspfNbrLsRetransQLen         Gauge32,
    tmnxOspfNbrBadNbrStates          Counter32,
    tmnxOspfNbrLsaInstallFailed      Counter32,
    tmnxOspfNbrBadSeqNums            Counter32,
    tmnxOspfNbrBadMTUs               Counter32,
    tmnxOspfNbrBadPackets            Counter32,
    tmnxOspfNbrLsaNotInLsdbs         Counter32,
    tmnxOspfNbrOptionMismatches      Counter32,
    tmnxOspfNbrDuplicates            Counter32,
    tmnxOspfNbrNumRestarts           Counter32
}

tmnxOspfNbrEvents                OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrEvents indicates the number of times this
         neighbor relationship has changed state, or an error has occurred."
    ::= { tmnxOspfNbrStatsEntry 1 }

tmnxOspfNbrLsRetransQLen         OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrLsRetransQLen indicates the current length of
         the retransmission queue."
    ::= { tmnxOspfNbrStatsEntry 2 }

tmnxOspfNbrBadNbrStates          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBadNbrStates indicates the total number of
         OSPF packets received when the neighbor state was not expecting to
         receive this packet type since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNbrStatsEntry 3 }

tmnxOspfNbrLsaInstallFailed      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrLsaInstallFailed indicates the total number of
         times an LSA could not be installed into the LSDB due to a resource
         allocation issue since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 4 }

tmnxOspfNbrBadSeqNums            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBadSeqNums indicates the total number of times
         when a database description packet was received with a sequence number
         mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 5 }

tmnxOspfNbrBadMTUs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBadMTUs indicates the total number of times
         when the MTU in a received database description packet was larger than
         the MTU of the receiving interface since tmnxOspfAdminState was last
         set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 6 }

tmnxOspfNbrBadPackets            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrBadPackets indicates the total number of times
         when an LS update was received with an illegal LS type or an option
         mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 7 }

tmnxOspfNbrLsaNotInLsdbs         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrLsaNotInLsdbs indicates the total number of
         times when an LS request was received for an LSA not installed in the
         LSDB of this router since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNbrStatsEntry 8 }

tmnxOspfNbrOptionMismatches      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrOptionMismatches indicates the total number of
         times when a LS update was received with an option mismatch since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 9 }

tmnxOspfNbrDuplicates            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrDuplicates indicates the total number of times
         when a duplicate database description packet was received during the
         Exchange state since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNbrStatsEntry 10 }

tmnxOspfNbrNumRestarts           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNbrNumRestarts indicates the number of times the
         neighbor has attempted restart."
    ::= { tmnxOspfNbrStatsEntry 11 }

tmnxOspfCfgNbrTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfCfgNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfCfgNbrTable contains information about configured
         non-virtual neighbors and neighbors dynamically discovered by
         lower-level protocols such as Inverse Neighbor Discovery."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data Structure"
    ::= { tmnxOspfObjects 18 }

tmnxOspfCfgNbrEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfCfgNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfCfgNbrEntry contains information regarding a single
         configured neighbor or neighbor discovered by lower-level protocols
         such as Inverse Neighbor Discovery."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data Structure"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfCfgNbrIfIndex,
        tmnxOspfCfgNbrIfInstId,
        tmnxOspfCfgNbrAddressType,
        tmnxOspfCfgNbrAddress
    }
    ::= { tmnxOspfCfgNbrTable 1 }

TmnxOspfCfgNbrEntry              ::= SEQUENCE
{
    tmnxOspfCfgNbrIfIndex            InterfaceIndex,
    tmnxOspfCfgNbrIfInstId           TmnxOspfIfInstIdTc,
    tmnxOspfCfgNbrAddressType        InetAddressType,
    tmnxOspfCfgNbrAddress            InetAddress,
    tmnxOspfCfgNbrStatus             RowStatus,
    tmnxOspfCfgNbrStorageType        StorageType,
    tmnxOspfCfgNbrLastChanged        TimeStamp,
    tmnxOspfCfgNbrPriority           DesignatedRouterPriority,
    tmnxOspfCfgNbrRtrId              TmnxOspfRouterIdTc,
    tmnxOspfCfgNbrState              INTEGER
}

tmnxOspfCfgNbrIfIndex            OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrIfIndex specifies the local link ID of the
         link over which the neighbor can be reached."
    ::= { tmnxOspfCfgNbrEntry 1 }

tmnxOspfCfgNbrIfInstId           OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrIfInstId specifies the interface
         instance over which the neighbor can be reached.  This ID has
         local link significance only."
    ::= { tmnxOspfCfgNbrEntry 2 }

tmnxOspfCfgNbrAddressType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrAddressType specifies the address type
         of tmnxOspfCfgNbrAddress.  For IPv6 type addresses only addresses
         with zone index are expected."
    ::= { tmnxOspfCfgNbrEntry 3 }

tmnxOspfCfgNbrAddress            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrAddress specifies the IP address of the
         neighbor associated with the local link."
    ::= { tmnxOspfCfgNbrEntry 4 }

tmnxOspfCfgNbrStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrStatus controls creation and deletion of
         row entries in this table."
    ::= { tmnxOspfCfgNbrEntry 5 }

tmnxOspfCfgNbrStorageType        OBJECT-TYPE
    SYNTAX      StorageType
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfCfgNbrStorageType specifies the storage type
         for this conceptual row.  Conceptual rows having the value
         'permanent' need not allow write-access to any columnar objects
         in the row.  Manually configured entries will have a storage type
         of nonVolatile while entries dynamically created as a result of a
         lower-level protocol such as Inverse Neighbor Discovery will have a
         storage type of volatile.

         This object is obsoleted in release 16.0."
    DEFVAL      { nonVolatile }
    ::= { tmnxOspfCfgNbrEntry 6 }

tmnxOspfCfgNbrLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfCfgNbrEntry 7 }

tmnxOspfCfgNbrPriority           OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrPriority specifies the priority of this
         neighbor in the designated router election algorithm. The value 0
         signifies that the neighbor is not eligible to become the designated
         router on this particular network.

         This object has become read-only from release 15.0R4 on."
    DEFVAL      { 1 }
    ::= { tmnxOspfCfgNbrEntry 8 }

tmnxOspfCfgNbrRtrId              OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrRtrId indicates a 32-bit integer uniquely
         identifying the neighboring router in the Autonomous System. A value
         of 0 is returned until a Hello is received from the configured
         neighbor."
    ::= { tmnxOspfCfgNbrEntry 9 }

tmnxOspfCfgNbrState              OBJECT-TYPE
    SYNTAX      INTEGER {
        down          (1),
        attempt       (2),
        init          (3),
        twoWay        (4),
        exchangeStart (5),
        exchange      (6),
        loading       (7),
        full          (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfCfgNbrState indicates the State of the
         relationship with this Neighbor."
    REFERENCE
        "OSPF Version 2, Section 10.1 Neighbor States"
    ::= { tmnxOspfCfgNbrEntry 10 }

tmnxOspfVirtNbrTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfVirtNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtNbrTable contains virtual neighbors information."
    REFERENCE
        "OSPF Version 2, Section 15 Virtual Links"
    ::= { tmnxOspfObjects 19 }

tmnxOspfVirtNbrEntry             OBJECT-TYPE
    SYNTAX      TmnxOspfVirtNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtNbrEntry contains information for a specific Virtual
         neighbor."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfVirtNbrArea,
        tmnxOspfVirtNbrRtrId
    }
    ::= { tmnxOspfVirtNbrTable 1 }

TmnxOspfVirtNbrEntry             ::= SEQUENCE
{
    tmnxOspfVirtNbrArea              TmnxOspfAreaIdTc,
    tmnxOspfVirtNbrRtrId             TmnxOspfRouterIdTc,
    tmnxOspfVirtNbrIfIndex           InterfaceIndex,
    tmnxOspfVirtNbrIfInstId          TmnxOspfIfInstIdTc,
    tmnxOspfVirtNbrAddressType       InetAddressType,
    tmnxOspfVirtNbrAddress           InetAddress,
    tmnxOspfVirtNbrOptions           Integer32,
    tmnxOspfVirtNbrState             INTEGER,
    tmnxOspfVirtNbrHelloSuppressed   TruthValue,
    tmnxOspfVirtNbrIfId              InterfaceIndexOrZero,
    tmnxOspfVirtNbrRestartHelperStatus INTEGER,
    tmnxOspfVirtNbrRestartHelperAge  TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfVirtNbrRestartHelperExitRc INTEGER,
    tmnxOspfVirtNbrUpTime            TimeInterval,
    tmnxOspfVirtNbrLastEventTime     TimeStamp,
    tmnxOspfVirtNbrDeadTmeOutstng    Unsigned32,
    tmnxOspfVirtNbrLastRestartTime   TimeStamp,
    tmnxOspfVirtNbrRestartReason     TmnxOspfRestartReasonTc
}

tmnxOspfVirtNbrArea              OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrArea specifies the Transit Area
         Identifier."
    ::= { tmnxOspfVirtNbrEntry 1 }

tmnxOspfVirtNbrRtrId             OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrRtrId specifies a 32-bit integer uniquely
         identifying the neighboring router in the Autonomous System."
    ::= { tmnxOspfVirtNbrEntry 2 }

tmnxOspfVirtNbrIfIndex           OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrIfIndex indicates the local interface ID
         for the virtual link over which the neighbor can be reached."
    ::= { tmnxOspfVirtNbrEntry 3 }

tmnxOspfVirtNbrIfInstId          OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrIfInstId indicates the interface instance
         for the virtual link over which the neighbor can be reached."
    ::= { tmnxOspfVirtNbrEntry 4 }

tmnxOspfVirtNbrAddressType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrAddressType indicates the address type of
         tmnxOspfVirtNbrAddress. For IPv6 address type only addresses without
         zone index are expected."
    ::= { tmnxOspfVirtNbrEntry 5 }

tmnxOspfVirtNbrAddress           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrAddress indicates the IP address
         advertised by this Virtual Neighbor. It must be a Global scope
         address."
    ::= { tmnxOspfVirtNbrEntry 6 }

tmnxOspfVirtNbrOptions           OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrOptions indicates a Bit Mask corresponding
         to the neighbor's options field."
    REFERENCE
        "OSPF Version 3, Appendix A.2 the Options field"
    ::= { tmnxOspfVirtNbrEntry 7 }

tmnxOspfVirtNbrState             OBJECT-TYPE
    SYNTAX      INTEGER {
        down          (1),
        attempt       (2),
        init          (3),
        twoWay        (4),
        exchangeStart (5),
        exchange      (6),
        loading       (7),
        full          (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrState indicates the state of the Virtual
         Neighbor Relationship."
    ::= { tmnxOspfVirtNbrEntry 8 }

tmnxOspfVirtNbrHelloSuppressed   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrHelloSuppressed indicates whether Hellos
         are being suppressed to the neighbor"
    ::= { tmnxOspfVirtNbrEntry 9 }

tmnxOspfVirtNbrIfId              OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrIfId indicates the interface ID that the
         neighbor advertises in its Hello Packets on this virtual link, that
         is, the neighbor's local interface ID."
    ::= { tmnxOspfVirtNbrEntry 10 }

tmnxOspfVirtNbrRestartHelperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
        notHelping (1),
        helping    (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrRestartHelperStatus indicates whether the
         router is acting as a Graceful restart helper for the neighbor."
    ::= { tmnxOspfVirtNbrEntry 11 }

tmnxOspfVirtNbrRestartHelperAge  OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrRestartHelperAge indicates the remaining
         time in current OSPF Graceful restart interval, if the router is
         acting as a restart helper for the neighbor."
    ::= { tmnxOspfVirtNbrEntry 12 }

tmnxOspfVirtNbrRestartHelperExitRc OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        inProgress      (2),
        completed       (3),
        timedOut        (4),
        topologyChanged (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrRestartHelperExitRc indicates the outcome
         of the last attempt at acting as a Graceful restart helper for the
         neighbor.

              none             No restart has yet been attempted.
              inProgress       A restart attempt is currently underway.
              completed        The last restart completed successfully.
              timedOut         The last restart timed out.
              topologyChanged  The last restart was aborted due to
                               a topology change."
    ::= { tmnxOspfVirtNbrEntry 13 }

tmnxOspfVirtNbrUpTime            OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrUpTime indicates the uninterrupted time,
         in hundredths of seconds, the adjacency to this virtual neighbour has
         been up."
    ::= { tmnxOspfVirtNbrEntry 14 }

tmnxOspfVirtNbrLastEventTime     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrLastEventTime indicates the value of
         sysUpTime when the last event occurred that affected the adjacency to
         the virtual neighbour."
    ::= { tmnxOspfVirtNbrEntry 15 }

tmnxOspfVirtNbrDeadTmeOutstng    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrDeadTmeOutstng indicates the amount of
         time in seconds until the dead-router interval expires. Normally, this
         value should not be significantly smaller than the configured dead
         router interval minus one hello interval."
    ::= { tmnxOspfVirtNbrEntry 16 }

tmnxOspfVirtNbrLastRestartTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrLastRestartTime indicates the last time
         the neighbor attempted restart."
    ::= { tmnxOspfVirtNbrEntry 17 }

tmnxOspfVirtNbrRestartReason     OBJECT-TYPE
    SYNTAX      TmnxOspfRestartReasonTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrRestartReason indicates the OSPF
         neighbor's graceful restart reason."
    ::= { tmnxOspfVirtNbrEntry 18 }

tmnxOspfVirtNbrStatsTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfVirtNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtNbrStatsTable provides an extension of the
         tmnxOspfVirtNbrTable for statistics for an OSPF virtual neighbor."
    ::= { tmnxOspfObjects 20 }

tmnxOspfVirtNbrStatsEntry        OBJECT-TYPE
    SYNTAX      TmnxOspfVirtNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfVirtNbrStatsTable represents additional
         columns for statistics for an OSPF virtual neighbor."
    AUGMENTS    { tmnxOspfVirtNbrEntry }
    ::= { tmnxOspfVirtNbrStatsTable 1 }

TmnxOspfVirtNbrStatsEntry        ::= SEQUENCE
{
    tmnxOspfVirtNbrEvents            Counter32,
    tmnxOspfVirtNbrLsRetransQLen     Gauge32,
    tmnxOspfVirtNbrBadNbrStates      Counter32,
    tmnxOspfVirtNbrLsaInstallFail    Counter32,
    tmnxOspfVirtNbrBadSeqNums        Counter32,
    tmnxOspfVirtNbrBadMTUs           Counter32,
    tmnxOspfVirtNbrBadPackets        Counter32,
    tmnxOspfVirtNbrLsaNotInLsdbs     Counter32,
    tmnxOspfVirtNbrOptionMismatch    Counter32,
    tmnxOspfVirtNbrDuplicates        Counter32,
    tmnxOspfVirtNbrNumRestarts       Counter32
}

tmnxOspfVirtNbrEvents            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrEvents indicates the number of times this
         virtual link has changed its state, or an error has occurred."
    ::= { tmnxOspfVirtNbrStatsEntry 1 }

tmnxOspfVirtNbrLsRetransQLen     OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrLsRetransQLen indicates the current length
         of the retransmission queue."
    ::= { tmnxOspfVirtNbrStatsEntry 2 }

tmnxOspfVirtNbrBadNbrStates      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrBadNbrStates indicates the total number of
         OSPF packets received when the virtual neighbor state was not
         expecting to receive this packet type since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 3 }

tmnxOspfVirtNbrLsaInstallFail    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrLsaInstallFail indicates the total number
         of times when an LSA could not be installed into the LSDB due to a
         resource allocation issue since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 4 }

tmnxOspfVirtNbrBadSeqNums        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrBadSeqNums indicates the total number of
         times when a database description packet was received with a sequence
         number mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 5 }

tmnxOspfVirtNbrBadMTUs           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrBadMTUs indicates the total number of
         times when the MTU in a received database description packet was
         larger than the MTU of the receiving interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 6 }

tmnxOspfVirtNbrBadPackets        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrBadPackets indicates the total number of
         times when an LS update was received with an illegal LS type or an
         option mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 7 }

tmnxOspfVirtNbrLsaNotInLsdbs     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrLsaNotInLsdbs indicates the total number
         of times when an LS request was received for an LSA not installed in
         the LSDB of this router since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 8 }

tmnxOspfVirtNbrOptionMismatch    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrOptionMismatch indicates the total number
         of times when a LS update was received with an option mismatch since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 9 }

tmnxOspfVirtNbrDuplicates        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrDuplicates indicates the total number of
         times when a duplicate database description packet was received during
         the Exchange state since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 10 }

tmnxOspfVirtNbrNumRestarts       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtNbrNumRestarts indicates the number of times
         the virtual neighbor has attempted restart since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfVirtNbrStatsEntry 11 }

tmnxOspfAreaAggrTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAreaAggrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaAggrTable contains information about area
         aggregates defined by a range of IP prefixes specified by a
         prefix/prefix length pair.  Note that if ranges are configured
         such that one range subsumes another range the most specific
         match is the preferred one."
    ::= { tmnxOspfObjects 21 }

tmnxOspfAreaAggrEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfAreaAggrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaAggrEntry contains information about a specific range
         of IP prefixes specified by a prefix/prefix length pair. Note that if
         ranges are configured such that one range subsumes another range the
         most specific match is the preferred one."
    REFERENCE
        "OSPF Version 2, Appendix C.2  Area parameters"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaAggrAreaID,
        tmnxOspfAreaAggrAreaLsdbType,
        tmnxOspfAreaAggrPrefixType,
        tmnxOspfAreaAggrPrefix,
        tmnxOspfAreaAggrPrefixLength
    }
    ::= { tmnxOspfAreaAggrTable 1 }

TmnxOspfAreaAggrEntry            ::= SEQUENCE
{
    tmnxOspfAreaAggrAreaID           TmnxOspfAreaIdTc,
    tmnxOspfAreaAggrAreaLsdbType     INTEGER,
    tmnxOspfAreaAggrPrefixType       TmnxAddressAndPrefixType,
    tmnxOspfAreaAggrPrefix           TmnxAddressAndPrefixAddress,
    tmnxOspfAreaAggrPrefixLength     TmnxAddressAndPrefixPrefix,
    tmnxOspfAreaAggrStatus           RowStatus,
    tmnxOspfAreaAggrLastChanged      TimeStamp,
    tmnxOspfAreaAggrEffect           INTEGER,
    tmnxOspfAreaAggrRouteTag         Integer32
}

tmnxOspfAreaAggrAreaID           OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrAreaID specifies the Area the Address
         Aggregate is to be found within."
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfAreaAggrEntry 1 }

tmnxOspfAreaAggrAreaLsdbType     OBJECT-TYPE
    SYNTAX      INTEGER {
        ospfv2InterAreaPrefixLsa (3),
        ospfv2NssaExternalLsa    (7),
        interAreaPrefixLsa       (8195),
        nssaExternalLsa          (8199)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrAreaLsdbType specifies the type of
         the Address Aggregate.  This field specifies the Area Lsdb type
         that this Address Aggregate applies to."
    REFERENCE
        "OSPF Version 2, Appendix A.4.1 The Link State
         Advertisement header"
    ::= { tmnxOspfAreaAggrEntry 2 }

tmnxOspfAreaAggrPrefixType       OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAreaAggrPrefixType specifies the prefix type of
         tmnxOspfAreaAggrPrefix. For addresses of IPv6 type only addresses
         without zone index are expected."
    ::= { tmnxOspfAreaAggrEntry 3 }

tmnxOspfAreaAggrPrefix           OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrPrefix specifies the IP Prefix."
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfAreaAggrEntry 4 }

tmnxOspfAreaAggrPrefixLength     OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixPrefix (0..128)
    UNITS       "bits"
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrPrefixLength specifies the length of
         the prefix (in bits).  An IPv6 prefix cannot be shorter than
         3 bits.  The 0, 1, and 2 prefix lengths are only valid for IPv4
         addresses."
    REFERENCE
        "OSPF Version 2, Appendix C.2 Area parameters"
    ::= { tmnxOspfAreaAggrEntry 5 }

tmnxOspfAreaAggrStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrStatus controls the creation and deletion
         of row entries in this table."
    ::= { tmnxOspfAreaAggrEntry 6 }

tmnxOspfAreaAggrLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrLastChanged indicates the value of
         sysUpTime when a configurable object in this row was last modified."
    ::= { tmnxOspfAreaAggrEntry 7 }

tmnxOspfAreaAggrEffect           OBJECT-TYPE
    SYNTAX      INTEGER {
        advertiseMatching      (1),
        doNotAdvertiseMatching (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrEffect specifies the prefixes subsumed by
         ranges either trigger the advertisement of the indicated aggregate,
         'advertiseMatching', or result in the prefix not being advertised at
         all outside the area."
    DEFVAL      { advertiseMatching }
    ::= { tmnxOspfAreaAggrEntry 8 }

tmnxOspfAreaAggrRouteTag         OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAreaAggrRouteTag specifies the tag that is
         advertised only in the summarized As-External LSA when summarizing
         from NSSA-LSAs to AS-External-LSAs."
    DEFVAL      { 0 }
    ::= { tmnxOspfAreaAggrEntry 9 }

tmnxOspfIfMD5KeyTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The tmnxOspfIfMD5KeyTable contains a list of MD5 keys to be used to
         authenticate OSPFv2 packets.

         This table is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfMD5KeyTable."
    ::= { tmnxOspfObjects 22 }

tmnxOspfIfMD5KeyEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Each row entry represents a MD5 key to be used to authenticate a
         OSPFv2 packet addressed to a particular OSPF IP address. Entries can
         be created and deleted via SNMP SET operations. Creation requires a
         SET request containing at least tmnxOspfIfMD5KeyKey and
         tmnxOspfIfMD5KeyStatus."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfIfIndex,
        tmnxOspfIfInstId,
        tmnxOspfIfMD5KeyIndex
    }
    ::= { tmnxOspfIfMD5KeyTable 1 }

TmnxOspfIfMD5KeyEntry            ::= SEQUENCE
{
    tmnxOspfIfMD5KeyIndex            TmnxOspfIfMD5KeyId,
    tmnxOspfIfMD5KeyStatus           RowStatus,
    tmnxOspfIfMD5KeyKey              OCTET STRING,
    tmnxOspfIfMD5KeyStartTime        DateAndTime,
    tmnxOspfIfMD5KeyStopTime         DateAndTime
}

tmnxOspfIfMD5KeyIndex            OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyIndex provides a unique identifier for a
         key to be used for authentication on a specific OSPFv2 IP address.

         If tmnxOspfIfMD5KeyIndex has a value of 0, it means that no keys are
         configured."
    ::= { tmnxOspfIfMD5KeyEntry 1 }

tmnxOspfIfMD5KeyStatus           OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The object tmnxOspfIfMD5KeyStatus is the RowStatus used for creation,
         deletion, or control of tmnxOspfIfMD5KeyTable entries. Before the row
         can be placed into the 'active' state tmnxOspfIfMD5KeyKey must have
         been assigned a value."
    ::= { tmnxOspfIfMD5KeyEntry 2 }

tmnxOspfIfMD5KeyKey              OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyKey specifies the MD5 authentication key
         to be used on this OSPFv2 IP address.

         When read, tmnxOspfIfMD5KeyKey always returns an OCTET STRING of
         length zero."
    ::= { tmnxOspfIfMD5KeyEntry 3 }

tmnxOspfIfMD5KeyStartTime        OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyStartTime specifies the date and time
         when this MD5 authentication key becomes valid for use. If no date and
         time is set, represented by a DateAndTime string with 0 length, the
         key is valid by default."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfIfMD5KeyEntry 4 }

tmnxOspfIfMD5KeyStopTime         OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfIfMD5KeyStopTime specifies the date and time when
         this MD5 authentication key becomes invalid for use. If no date and
         time is set, represented by a DateAndTime string with 0 length, the
         key is valid indefinitely."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfIfMD5KeyEntry 5 }

tmnxOspfVirtIfMD5KeyTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfVirtIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfVirtIfMD5KeyTable contains a list of MD5 keys to be used
         to authenticate OSPFv2 packets on an OSPFv2 interface."
    ::= { tmnxOspfObjects 23 }

tmnxOspfVirtIfMD5KeyEntry        OBJECT-TYPE
    SYNTAX      TmnxOspfVirtIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a MD5 key to be used to authenticate a
         OSPFv2 packet addressed to a particular OSPFv2 IP address. Entries can
         be created and deleted via SNMP SET operations. Creation requires a
         SET request containing at least tmnxOspfVirtIfMD5KeyKey and
         tmnxOspfVirtIfMD5KeyStatus."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfVirtIfAreaId,
        tmnxOspfVirtIfNeighbor,
        tmnxOspfVirtIfMD5KeyIndex
    }
    ::= { tmnxOspfVirtIfMD5KeyTable 1 }

TmnxOspfVirtIfMD5KeyEntry        ::= SEQUENCE
{
    tmnxOspfVirtIfMD5KeyIndex        TmnxOspfIfMD5KeyId,
    tmnxOspfVirtIfMD5KeyStatus       RowStatus,
    tmnxOspfVirtIfMD5KeyKey          OCTET STRING,
    tmnxOspfVirtIfMD5KeyStartTime    DateAndTime,
    tmnxOspfVirtIfMD5KeyStopTime     DateAndTime
}

tmnxOspfVirtIfMD5KeyIndex        OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyIndex provides a unique identifier
         for a key to be used for authentication on a specific OSPFv2 virtual
         interface.

         If tmnxOspfVirtIfMD5KeyIndex has a value of 0, it means that no keys
         are configured."
    ::= { tmnxOspfVirtIfMD5KeyEntry 1 }

tmnxOspfVirtIfMD5KeyStatus       OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyStatus is the RowStatus used
         for creation, deletion, or control of tmnxOspfVirtIfMD5KeyTable
         entries.  Before the row can be placed into the 'active' state
         tmnxOspfVirtIfMD5KeyKey must have been assigned a value."
    ::= { tmnxOspfVirtIfMD5KeyEntry 2 }

tmnxOspfVirtIfMD5KeyKey          OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyKey specifies the MD5 authentication
         key to be used on this OSPFv2 virtual interface.

         When read, tmnxOspfVirtIfMD5KeyKey always returns an OCTET STRING of
         length zero."
    ::= { tmnxOspfVirtIfMD5KeyEntry 3 }

tmnxOspfVirtIfMD5KeyStartTime    OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyStartTime specifies the date and time
         when this MD5 authentication key becomes valid for use. If no date and
         time is set, represented by a DateAndTime string with 0 length, the
         key is valid by default.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfVirtIfMD5KeyEntry 4 }

tmnxOspfVirtIfMD5KeyStopTime     OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfVirtIfMD5KeyStopTime specifies the date and time
         when this MD5 authentication key becomes invalid for use. If no date
         and time is set, represented by a DateAndTime string with 0 length,
         the key is valid indefinitely.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfVirtIfMD5KeyEntry 5 }

tmnxOspfNotifyObjs               OBJECT IDENTIFIER ::= { tmnxOspfObjects 24 }

tmnxOspfSetTrap                  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (4))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSetTrap specifies a four-octet string serving
         as a bit map for the OSPF trap events.  This object is used
         to enable and disable specific OSPF traps where a 1 in the bit
         field represents enabled. The right-most bit  (least
         significant) represents trap 0."
    ::= { tmnxOspfNotifyObjs 1 }

tmnxOspfConfigErrorType          OBJECT-TYPE
    SYNTAX      INTEGER {
        badVersion            (1),
        areaMismatch          (2),
        unknownNbmaNbr        (3),
        unknownVirtualNbr     (4),
        authTypeMismatch      (5),
        authFailure           (6),
        netMaskMismatch       (7),
        helloIntervalMismatch (8),
        deadIntervalMismatch  (9),
        optionMismatch        (10),
        mtuMismatch           (11),
        duplicateRouterId     (12),
        noError               (13),
        instanceMismatch      (14),
        ifTypeMismatch        (1001),
        nullRouterId          (1002),
        ifAdminDown           (1003),
        ifPassive             (1004),
        subnetMismatch        (1005)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfConfigErrorType indicates the potential types
         of configuration conflicts.  Used  by the tmnxOspfNgIfConfigError and
         tmnxOspfVirtIfConfigError notifications.  When the last value of a
         notification using this object is needed, but no notifications of
         that type have been sent, the value pertaining to this object
         should be returned as 'noError'."
    ::= { tmnxOspfNotifyObjs 2 }

tmnxOspfPacketType               OBJECT-TYPE
    SYNTAX      INTEGER {
        hello      (1),
        dbDescript (2),
        lsReq      (3),
        lsUpdate   (4),
        lsAck      (5),
        nullPacket (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPacketType indicates the OSPF packet type. When
         the last value of a notification using this object is needed, but no
         notifications of that type have been sent, this value pertaining to
         this object should be returned as 'nullPacket'."
    ::= { tmnxOspfNotifyObjs 3 }

tmnxOspfPacketSrcAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The IP address type of tmnxOspfPacketSrcAddress."
    ::= { tmnxOspfNotifyObjs 4 }

tmnxOspfPacketSrcAddress         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPacketSrcAddress indicates the IP address of an
         inbound packet that cannot be identified by a neighbor instance. When
         the last value of a notification using this object is needed, but no
         notifications of that type have been sent, this value pertaining to
         this object should be returned as 0.0.0.0"
    ::= { tmnxOspfNotifyObjs 5 }

tmnxOspfIfIpName                 OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..45))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfIpName specifies the name of the OSPF
         interface that has experienced a state change.  It is the
         an ASCII string representation of the IP address of the IP
         interface on which OSPF is configured.  It is used by the
         tmnxOspfNgIfStateChange notification."
    ::= { tmnxOspfNotifyObjs 6 }

tmnxOspfIfEvent                  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..32))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfEvent specifies the root cause that
         resulted in a tmnxOspfNgIfStateChange notification.  Some
         possible causes are interface up, interface down, and neighbor
         changed."
    ::= { tmnxOspfNotifyObjs 7 }

tmnxOspfFailureReasonCode        OBJECT-TYPE
    SYNTAX      INTEGER {
        other         (1),
        mallocFailure (2),
        rtrLsaTooBig  (3),
        spfFailures   (4),
        rteTblAdd     (5),
        rteTblModify  (6),
        rteTblDelete  (7)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfFailureReasonCode indicates the reason for the
         last OSPF failure which resulted in it being marked operationally
         down. This object is used by the tmnxOspfFailureDisabled notification."
    ::= { tmnxOspfNotifyObjs 8 }

tmnxOspfBadPacketErrType         OBJECT-TYPE
    SYNTAX      INTEGER {
        wrongFormat  (1),
        wrongChksum  (2),
        ifOperDown   (3),
        badDstAddr   (4),
        badSrcAddr   (5),
        badLlsBlock  (6),
        doubleLlsMtu (7)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        ""
    ::= { tmnxOspfNotifyObjs 9 }

tmnxOspfNotifPfxSidRangeStartLbl OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNotifPfxSidRangeStartLbl indicates the start
         label of the first segment of a Segment Routing Global Block."
    ::= { tmnxOspfNotifyObjs 10 }

tmnxOspfNotifPfxSidRangeMaxIdx   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNotifPfxSidRangeMaxIdx indicates the maximum SID
         index of the first segment of a Segment Routing Global Block."
    ::= { tmnxOspfNotifyObjs 11 }

tmnxOspfNotifPfxNhAdvRtr         OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifPfxNhAdvRtr indicates the
         system-id of the IS through which this prefix-sid is reachable."
    ::= { tmnxOspfNotifyObjs 12 }

tmnxOspfNotifyDescription        OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The object tmnxOspfNotifyDescription is a printable character string."
    ::= { tmnxOspfNotifyObjs 13 }

tmnxOspfBfdSessSetupFailReason   OBJECT-TYPE
    SYNTAX      INTEGER {
        bfdSessNoError                 (0),
        bfdSessFailMaxSessionLimit     (1),
        bfdSessFailCfgNotProper        (2),
        bfdSessFailSanityCheck         (3),
        bfdSessFailGeneral             (4),
        bfdSessFailInternalProgramming (5),
        bfdSessFailCvDiscrNotFound     (6),
        bfdSessFailMaxPacketRate       (7),
        bfdSessFailHandleReplaced      (8),
        bfdSessFailBfdDisabledOnIntf   (9)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBfdSessSetupFailReason indicates the reason for
         the BFD setup failure. This object is used by the
         tmnxOspfAdjBfdSessionSetupFail notification."
    ::= { tmnxOspfNotifyObjs 14 }

tmnxOspfNotifSrgbRangeStartLbl   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifSrgbRangeStartLbl indicates the
         label at which the SRGB label range starts."
    ::= { tmnxOspfNotifyObjs 15 }

tmnxOspfNotifSrgbRangeMaxIdx     OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifSrgbRangeMaxIdx indicates the
         maximum index for the SRGB label range."
    ::= { tmnxOspfNotifyObjs 16 }

tmnxOspfNotifSrgbAdvRtrID        OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifSrgbAdvRtrID indicates the
         system-id of the SRGB advertising router."
    ::= { tmnxOspfNotifyObjs 17 }

tmnxOspfNotifSrgbAreaId          OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifSrgbAreaId indicates the OSPF
         Area at which the SRGB was learned."
    ::= { tmnxOspfNotifyObjs 18 }

tmnxOspfNotifyIfIndex            OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifyIfIndex indicates the OSPF
         Interface Index."
    ::= { tmnxOspfNotifyObjs 19 }

tmnxOspfNotifyNbrRouterId        OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNotifyNbrRouterId indicates the OSPF
         Neighbor Router Id."
    ::= { tmnxOspfNotifyObjs 20 }

tmnxOspfNotifStatsIndexStatus    OBJECT-TYPE
    SYNTAX      INTEGER {
        statsIndexAllocNoError    (0),
        statsIndexAllocNoResource (1)
    }
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNotifStatsIndexStatus indicates the statistic
         index allocation status. This object is used by the
         tmnxOspfSidStatsIndexAlloc notification."
    ::= { tmnxOspfNotifyObjs 21 }

tmnxOspfShamIfTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfShamIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamIfTable contains information about the sham links
         associated with OSPF."
    REFERENCE
        "OSPF Version 2, Appendix C.3 Router interface parameters"
    ::= { tmnxOspfObjects 25 }

tmnxOspfShamIfEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfShamIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamIfEntry contains information about a single Sham Link."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfShamIfIndex,
        tmnxOspfShamIfInstId,
        tmnxOspfShamIfRemoteNbrAddrType,
        tmnxOspfShamIfRemoteNbrAddress
    }
    ::= { tmnxOspfShamIfTable 1 }

TmnxOspfShamIfEntry              ::= SEQUENCE
{
    tmnxOspfShamIfIndex              InterfaceIndex,
    tmnxOspfShamIfInstId             TmnxOspfIfInstIdTc,
    tmnxOspfShamIfRemoteNbrAddrType  InetAddressType,
    tmnxOspfShamIfRemoteNbrAddress   InetAddress,
    tmnxOspfShamIfStatus             RowStatus,
    tmnxOspfShamIfLastChanged        TimeStamp,
    tmnxOspfShamIfAreaId             TmnxOspfAreaIdTc,
    tmnxOspfShamIfAdminState         Status,
    tmnxOspfShamIfTransitDelay       TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfShamIfRetransInterval    TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfShamIfHelloInterval      HelloRange,
    tmnxOspfShamIfRtrDeadInterval    TmnxOspfDeadIntRangeTc,
    tmnxOspfShamIfCfgMetric          TmnxOspfShamIfMetricTc,
    tmnxOspfShamIfAuthType           TmnxOspfAuthenticationType,
    tmnxOspfShamIfAuthKey            OCTET STRING,
    tmnxOspfShamIfState              INTEGER,
    tmnxOspfShamIfLastEnabledTime    TimeStamp,
    tmnxOspfShamIfLinkLsaCount       Gauge32,
    tmnxOspfShamIfLinkLsaCksumSum    Integer32,
    tmnxOspfShamIfLinkUnkLsaCount    Gauge32,
    tmnxOspfShamIfLinkUnkLsaCksumSum Integer32,
    tmnxOspfShamIfMD5TransmitKeyId   TmnxOspfIfMD5KeyId,
    tmnxOspfShamIfLocalIpAddressType InetAddressType,
    tmnxOspfShamIfLocalIpAddress     InetAddress,
    tmnxOspfShamIfMD5NumKeys         Gauge32,
    tmnxOspfShamIfAuthKeyChain       TNamedItemOrEmpty
}

tmnxOspfShamIfIndex              OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfIndex specifies the interface index of
         the local OSPF interface.  It corresponds to the interface index of
         the IP interface which is configured as the local end of the
         sham link."
    ::= { tmnxOspfShamIfEntry 1 }

tmnxOspfShamIfInstId             OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfInstId specifies the interface instance
         ID to be used for the sham link.  This ID has local link
         significance only."
    ::= { tmnxOspfShamIfEntry 2 }

tmnxOspfShamIfRemoteNbrAddrType  OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRemoteNbrAddrType type indicates the IP
         address type of tmnxOspfShamIfRemoteNbrAddress.

         tmnxOspfShamIfRemoteNbrAddrType supports only InetAddressType value
         'ipv4'."
    ::= { tmnxOspfShamIfEntry 3 }

tmnxOspfShamIfRemoteNbrAddress   OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRemoteNbrAddress specifies the IP address
         of the sham link Neighbor.  It corresponds to remote end of the sham
         link."
    ::= { tmnxOspfShamIfEntry 4 }

tmnxOspfShamIfStatus             OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfStatus controls creation and deletion of a
         row entry in this table."
    ::= { tmnxOspfShamIfEntry 5 }

tmnxOspfShamIfLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfShamIfEntry 6 }

tmnxOspfShamIfAreaId             OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAreaId specifies a 32-bit integer uniquely
         identifying the area which the sham link belongs to. Area ID 0 is used
         for the OSPF backbone."
    DEFVAL      { 0 }
    ::= { tmnxOspfShamIfEntry 7 }

tmnxOspfShamIfAdminState         OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAdminState specifies the OSPF interface's
         administrative state on this sham link."
    DEFVAL      { enabled }
    ::= { tmnxOspfShamIfEntry 8 }

tmnxOspfShamIfTransitDelay       OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTransitDelay specifies the estimated number
         of seconds it takes to transmit a link state update packet over this
         sham link."
    DEFVAL      { 1 }
    ::= { tmnxOspfShamIfEntry 9 }

tmnxOspfShamIfRetransInterval    OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRetransInterval specifies the number of
         seconds between link state advertisement retransmissions, for
         adjacencies belonging to this interface. This value is also used when
         retransmitting database description and link state request packets."
    DEFVAL      { 5 }
    ::= { tmnxOspfShamIfEntry 10 }

tmnxOspfShamIfHelloInterval      OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfHelloInterval specifies the length of
         time, in seconds, between the Hello packets that the router sends
         on the sham link.  This value MUST be same for all routers attached
         to a common network."
    DEFVAL      { 10 }
    ::= { tmnxOspfShamIfEntry 11 }

tmnxOspfShamIfRtrDeadInterval    OBJECT-TYPE
    SYNTAX      TmnxOspfDeadIntRangeTc
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRtrDeadInterval specifies the number of
         seconds that a router's Hello packets have not been seen before
         its neighbors declare the router down on the sham link.  This
         should be greater than or equal to (2 * tmnxOspfShamIfHelloInterval).
         This value MUST be same for all routers attached to a common network."
    DEFVAL      { 40 }
    ::= { tmnxOspfShamIfEntry 12 }

tmnxOspfShamIfCfgMetric          OBJECT-TYPE
    SYNTAX      TmnxOspfShamIfMetricTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfCfgMetric specifies the desired metric
         value assigned to this sham link."
    DEFVAL      { 1 }
    ::= { tmnxOspfShamIfEntry 13 }

tmnxOspfShamIfAuthType           OBJECT-TYPE
    SYNTAX      TmnxOspfAuthenticationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAuthType specifies the authentication type
         to use for a sham link.

         Note that this object can be used to engage in significant attacks
         against an OSPF router."
    REFERENCE
        "OSPF Version 2, Appendix D Authentication"
    DEFVAL      { none }
    ::= { tmnxOspfShamIfEntry 14 }

tmnxOspfShamIfAuthKey            OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..256))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAuthKey specifies the authentication key
         string.  The cleartext password is used as an OSPF Authentication
         key when simplePassword security is enabled. This object does not
         access any OSPF Cryptographic (e.g. MD5) Authentication Key under
         any circumstance.

         If the key length is shorter than 8 octets, the agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot use a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system. This
         authentication is only sufficient to protect against accidental
         misconfigurations because it reuses cleartext passwords. [RFC-1704]

         When read, tmnxOspfShamIfAuthKey always returns an Octet String of
         length zero.

         This object is valid only when tmnxOspfVersion has a value of
         'version2'."
    REFERENCE
        "OSPF Version 2, Section 9 The Interface Data Structure"
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOspfShamIfEntry 15 }

tmnxOspfShamIfState              OBJECT-TYPE
    SYNTAX      INTEGER {
        down         (1),
        pointToPoint (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfState indicates the operational state of
         this sham link."
    ::= { tmnxOspfShamIfEntry 16 }

tmnxOspfShamIfLastEnabledTime    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLastEnabledTime indicates the sysUpTime
         value when ospfIfAdminStat was last set to enabled (1) to run the ospf
         on this interface."
    ::= { tmnxOspfShamIfEntry 17 }

tmnxOspfShamIfLinkLsaCount       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLinkLsaCount indicates the total number of
         Link-Scope link-state advertisements in this link's link-state
         database."
    ::= { tmnxOspfShamIfEntry 18 }

tmnxOspfShamIfLinkLsaCksumSum    OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLinkLsaCksumSum indicates the 32-bit
         unsigned sum of the Link-Scope link-state advertisements' LS
         checksums contained in this link's link-state database.  The
         sum can be used to determine if there has been a change in a
         router's link-state database, and to compare the link state
         database of two routers."
    ::= { tmnxOspfShamIfEntry 19 }

tmnxOspfShamIfLinkUnkLsaCount    OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLinkUnkLsaCount indicates the total number
         of unknown Link-Scope link-state advertisements in this link's
         link-state database."
    ::= { tmnxOspfShamIfEntry 20 }

tmnxOspfShamIfLinkUnkLsaCksumSum OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLinkUnkLsaCksumSum indicates the 32-bit
         unsigned sum of the unknown Link-Scope link-state advertisements'
         LS checksums contained in this link's link-state database.  The
         sum can be used to determine if there has been a change in a
         router's link-state database, and to compare the link-state
         database of two routers."
    ::= { tmnxOspfShamIfEntry 21 }

tmnxOspfShamIfMD5TransmitKeyId   OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5TransmitKeyId indicates the index value
         used to access the row entry in the tmnxOspfShamIfMD5KeyTable that
         specifies the authentication type and key transmitted on this
         OSPF interface.  This object is valid only when tmnxOspfVersion
         has the value 'version2'.

         If tmnxOspfShamIfMD5TransmitKeyId has a value of 0, it means that no
         keys are configured."
    ::= { tmnxOspfShamIfEntry 22 }

tmnxOspfShamIfLocalIpAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLocalIpAddressType indicates the IP address
         type of tmnxOspfShamIfLocalIpAddress.

         tmnxOspfShamIfLocalIpAddressType supports only InetAddressType value
         'ipv4'."
    ::= { tmnxOspfShamIfEntry 23 }

tmnxOspfShamIfLocalIpAddress     OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLocalIpAddress indicates the IP address of
         this OSPF local interface of the sham link."
    ::= { tmnxOspfShamIfEntry 24 }

tmnxOspfShamIfMD5NumKeys         OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5NumKeys indicates the number of MD5 Key
         entries for this OSPF sham link."
    ::= { tmnxOspfShamIfEntry 25 }

tmnxOspfShamIfAuthKeyChain       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAuthKeyChain specifies the keychain which
         will be used to sign and/or authenticate the OSPF protocol stream.

         The keychain name is defined by tmnxKeyChainName and is the index for
         TIMETRA-SECURITY-MIB::tmnxKeyChainTable."
    DEFVAL      { ''H }
    ::= { tmnxOspfShamIfEntry 26 }

tmnxOspfShamIfStatsTable         OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfShamIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamIfStatsTable provides an extension of the
         tmnxOspfShamIfTable for statistics for an OSPF sham link."
    ::= { tmnxOspfObjects 26 }

tmnxOspfShamIfStatsEntry         OBJECT-TYPE
    SYNTAX      TmnxOspfShamIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfShamIfStatsTable represents additional
         columns for statistics for an OSPF sham link."
    AUGMENTS    { tmnxOspfShamIfEntry }
    ::= { tmnxOspfShamIfStatsTable 1 }

TmnxOspfShamIfStatsEntry         ::= SEQUENCE
{
    tmnxOspfShamIfEvents             Counter32,
    tmnxOspfShamIfTxPackets          Counter32,
    tmnxOspfShamIfTxHellos           Counter32,
    tmnxOspfShamIfTxDBDs             Counter32,
    tmnxOspfShamIfTxLSRs             Counter32,
    tmnxOspfShamIfTxLSUs             Counter32,
    tmnxOspfShamIfTxLSAcks           Counter32,
    tmnxOspfShamIfRxPackets          Counter32,
    tmnxOspfShamIfRxHellos           Counter32,
    tmnxOspfShamIfRxDBDs             Counter32,
    tmnxOspfShamIfRxLSRs             Counter32,
    tmnxOspfShamIfRxLSUs             Counter32,
    tmnxOspfShamIfRxLSAcks           Counter32,
    tmnxOspfShamIfDiscardPackets     Counter32,
    tmnxOspfShamIfRetransmitOuts     Counter32,
    tmnxOspfShamIfBadVersions        Counter32,
    tmnxOspfShamIfBadNetworks        Counter32,
    tmnxOspfShamIfBadAreas           Counter32,
    tmnxOspfShamIfBadDstAddrs        Counter32,
    tmnxOspfShamIfBadNeighbors       Counter32,
    tmnxOspfShamIfBadPacketTypes     Counter32,
    tmnxOspfShamIfLastEventTime      TimeStamp,
    tmnxOspfShamIfBadLengths         Counter32,
    tmnxOspfShamIfBadHelloIntervals  Counter32,
    tmnxOspfShamIfBadDeadIntervals   Counter32,
    tmnxOspfShamIfBadOptions         Counter32,
    tmnxOspfShamIfRxBadChecksums     Counter32,
    tmnxOspfShamIfBadAuthTypes       Counter32,
    tmnxOspfShamIfAuthFailures       Counter32
}

tmnxOspfShamIfEvents             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfEvents indicates the number of state
         changes or error events on this sham link."
    ::= { tmnxOspfShamIfStatsEntry 1 }

tmnxOspfShamIfTxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxPackets indicates the total number of
         OSPF packets transmitted on this sham link since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 2 }

tmnxOspfShamIfTxHellos           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxHellos indicates the total number of OSPF
         Hello packets transmitted on this sham link since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 3 }

tmnxOspfShamIfTxDBDs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxDBDs indicates the total number of OSPF
         Database Description packets transmitted on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 4 }

tmnxOspfShamIfTxLSRs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxLSRs indicates the total number of OSPF
         Link State Requests (LSRs) transmitted on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 5 }

tmnxOspfShamIfTxLSUs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxLSUs indicates the total number of OSPF
         Link State Updates (LSUs) transmitted on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 6 }

tmnxOspfShamIfTxLSAcks           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfTxLSAcks indicates the total number of OSPF
         Link State Acknowledgements transmitted on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 7 }

tmnxOspfShamIfRxPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxPackets indicates the total number of
         OSPF packets received on this sham link since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 8 }

tmnxOspfShamIfRxHellos           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxHellos indicates the total number of OSPF
         Hello packets received on this sham link since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 9 }

tmnxOspfShamIfRxDBDs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxDBDs indicates the total number of
         OSPF Database Description packets  received on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 10 }

tmnxOspfShamIfRxLSRs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxLSRs indicates the total number of Link
         State Requests (LSRs) received on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 11 }

tmnxOspfShamIfRxLSUs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxLSUs indicates the total number of Link
         State Updates (LSUs) received on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 12 }

tmnxOspfShamIfRxLSAcks           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxLSAcks indicates the total number of Link
         State Acknowledgements received on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 13 }

tmnxOspfShamIfDiscardPackets     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfDiscardPackets indicates the total number
         of OSPF packets discarded on this sham link since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 14 }

tmnxOspfShamIfRetransmitOuts     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRetransmitOuts indicates the total number
         of OSPF Retransmits sent on this sham link since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 15 }

tmnxOspfShamIfBadVersions        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadVersions indicates the total number of
         OSPF packets received with bad OSPF version numbers since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 16 }

tmnxOspfShamIfBadNetworks        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadNetworks indicates the total number of
         OSPF packets received with invalid network or mask since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 17 }

tmnxOspfShamIfBadAreas           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadAreas indicates the total number of OSPF
         packets received with an area mismatch since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 18 }

tmnxOspfShamIfBadDstAddrs        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadDstAddrs indicates the total number of
         OSPF packets received with the incorrect IP destination address since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 19 }

tmnxOspfShamIfBadNeighbors       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadNeighbors indicates the total number of
         OSPF packets received where the neighbor information does not match
         the information this router has for the neighbor since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 20 }

tmnxOspfShamIfBadPacketTypes     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadPacketTypes indicates the total number
         of OSPF packets received with an invalid OSPF packet type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 21 }

tmnxOspfShamIfLastEventTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfLastEventTime indicates the value of
         sysUpTime when an event was last associated with this OSPF sham link."
    ::= { tmnxOspfShamIfStatsEntry 22 }

tmnxOspfShamIfBadLengths         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadLengths indicates the total number of
         OSPF packets received on this sham link with a total length not equal
         to the length given in the packet itself since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 23 }

tmnxOspfShamIfBadHelloIntervals  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadHelloIntervals indicates the total
         number of OSPF packets received where the hello interval given in
         packet was not equal to that configured on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 24 }

tmnxOspfShamIfBadDeadIntervals   OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadDeadIntervals indicates the total number
         of OSPF packets received where the dead interval given in the packet
         was not equal to that configured on this sham link since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 25 }

tmnxOspfShamIfBadOptions         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadOptions indicates the total number of
         OSPF packets received with an option that does not match those
         configured for this sham link or area since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 26 }

tmnxOspfShamIfRxBadChecksums     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfRxBadChecksums indicates the count of LSAs
         received with bad checksums."
    ::= { tmnxOspfShamIfStatsEntry 27 }

tmnxOspfShamIfBadAuthTypes       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfBadAuthTypes indicates the total number of
         OSPF packets received with an invalid authorization type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 28 }

tmnxOspfShamIfAuthFailures       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfAuthFailures indicates the total number of
         OSPF packets received with an invalid authorization key since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamIfStatsEntry 29 }

tmnxOspfShamIfMD5KeyTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfShamIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamIfMD5KeyTable contains a list of MD5 keys to be used
         to authenticate OSPFv2 packets."
    ::= { tmnxOspfObjects 27 }

tmnxOspfShamIfMD5KeyEntry        OBJECT-TYPE
    SYNTAX      TmnxOspfShamIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a MD5 key to be used to authenticate an
         OSPFv2 packet addressed to a particular OSPF IP address. Entries can
         be created and deleted via SNMP SET operations. Creation requires a
         SET request containing at least tmnxOspfShamIfMD5KeyKey and
         tmnxOspfShamIfMD5KeyStatus."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfShamIfIndex,
        tmnxOspfShamIfInstId,
        tmnxOspfShamIfRemoteNbrAddrType,
        tmnxOspfShamIfRemoteNbrAddress,
        tmnxOspfShamIfMD5KeyIndex
    }
    ::= { tmnxOspfShamIfMD5KeyTable 1 }

TmnxOspfShamIfMD5KeyEntry        ::= SEQUENCE
{
    tmnxOspfShamIfMD5KeyIndex        TmnxOspfIfMD5KeyId,
    tmnxOspfShamIfMD5KeyStatus       RowStatus,
    tmnxOspfShamIfMD5KeyKey          OCTET STRING,
    tmnxOspfShamIfMD5KeyStartTime    DateAndTime,
    tmnxOspfShamIfMD5KeyStopTime     DateAndTime
}

tmnxOspfShamIfMD5KeyIndex        OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyIndex provides a unique identifier
         for a key to be used for authentication on a specific OSPFv2 IP
         address.

         If tmnxOspfShamIfMD5KeyIndex has a value of 0, it means that no keys
         are configured."
    ::= { tmnxOspfShamIfMD5KeyEntry 1 }

tmnxOspfShamIfMD5KeyStatus       OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object tmnxOspfShamIfMD5KeyStatus is the RowStatus used for
         creation, deletion, or control of tmnxOspfShamIfMD5KeyTable entries.
         Before the row can be placed into the 'active' state
         tmnxOspfShamIfMD5KeyKey must have been assigned a value."
    ::= { tmnxOspfShamIfMD5KeyEntry 2 }

tmnxOspfShamIfMD5KeyKey          OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyKey specifies the MD5 authentication
         key to be used on this OSPFv2 IP address.

         When read, tmnxOspfShamIfMD5KeyKey always returns an OCTET STRING of
         length zero."
    ::= { tmnxOspfShamIfMD5KeyEntry 3 }

tmnxOspfShamIfMD5KeyStartTime    OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyStartTime specifies the date and time
         when this MD5 authentication key becomes valid for use. If no date and
         time is set, represented by a DateAndTime string with 0 length, the
         key is valid by default.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfShamIfMD5KeyEntry 4 }

tmnxOspfShamIfMD5KeyStopTime     OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfShamIfMD5KeyStopTime specifies the date and time
         when this MD5 authentication key becomes invalid for use. If no date
         and time is set, represented by a DateAndTime string with 0 length,
         the key is valid indefinitely.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfShamIfMD5KeyEntry 5 }

tmnxOspfShamNbrTable             OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfShamNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamNbrTable contains sham links neighbors information."
    REFERENCE
        "OSPF Version 2, Section 15 Sham Links"
    ::= { tmnxOspfObjects 28 }

tmnxOspfShamNbrEntry             OBJECT-TYPE
    SYNTAX      TmnxOspfShamNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamNbrEntry contains information for a specific sham link
         neighbor."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfShamNbrIfIndex,
        tmnxOspfShamNbrIfInstId,
        tmnxOspfShamNbrAddressType,
        tmnxOspfShamNbrAddress,
        tmnxOspfShamNbrRtrId
    }
    ::= { tmnxOspfShamNbrTable 1 }

TmnxOspfShamNbrEntry             ::= SEQUENCE
{
    tmnxOspfShamNbrIfIndex           InterfaceIndex,
    tmnxOspfShamNbrIfInstId          TmnxOspfIfInstIdTc,
    tmnxOspfShamNbrAddressType       InetAddressType,
    tmnxOspfShamNbrAddress           InetAddress,
    tmnxOspfShamNbrRtrId             TmnxOspfRouterIdTc,
    tmnxOspfShamNbrOptions           Integer32,
    tmnxOspfShamNbrState             INTEGER,
    tmnxOspfShamNbrHelloSuppressed   TruthValue,
    tmnxOspfShamNbrIfId              InterfaceIndexOrZero,
    tmnxOspfShamNbrRestartHelperStatus INTEGER,
    tmnxOspfShamNbrRestartHelperAge  TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfShamNbrRestartHelperExitRc INTEGER,
    tmnxOspfShamNbrUpTime            TimeInterval,
    tmnxOspfShamNbrLastEventTime     TimeStamp,
    tmnxOspfShamNbrDeadTmeOutstng    Unsigned32,
    tmnxOspfShamNbrLastRestartTime   TimeStamp,
    tmnxOspfShamNbrRestartReason     TmnxOspfRestartReasonTc
}

tmnxOspfShamNbrIfIndex           OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrIfIndex specifies the local link ID of the
         link over which the sham link neighbor can be reached."
    ::= { tmnxOspfShamNbrEntry 1 }

tmnxOspfShamNbrIfInstId          OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrIfInstId specifies the interface instance
         over which the sham link neighbor can be reached.  This ID has
         local link significance only."
    ::= { tmnxOspfShamNbrEntry 2 }

tmnxOspfShamNbrAddressType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrAddressType indicates the address type of
         tmnxOspfShamNbrAddress. For IPv6 address type only addresses without
         zone index are expected."
    ::= { tmnxOspfShamNbrEntry 3 }

tmnxOspfShamNbrAddress           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrAddress indicates the IP address
         advertised by this Sham link Neighbor. It must be a Global scope
         address."
    ::= { tmnxOspfShamNbrEntry 4 }

tmnxOspfShamNbrRtrId             OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrRtrId specifies a 32-bit integer uniquely
         identifying the neighboring router in the Autonomous System."
    ::= { tmnxOspfShamNbrEntry 5 }

tmnxOspfShamNbrOptions           OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrOptions indicates a Bit Mask corresponding
         to the sham link neighbor's options field."
    REFERENCE
        "OSPF Version 3, Appendix A.2 the Options field"
    ::= { tmnxOspfShamNbrEntry 6 }

tmnxOspfShamNbrState             OBJECT-TYPE
    SYNTAX      INTEGER {
        down          (1),
        attempt       (2),
        init          (3),
        twoWay        (4),
        exchangeStart (5),
        exchange      (6),
        loading       (7),
        full          (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrState indicates the state of the Sham link
         Neighbor Relationship."
    ::= { tmnxOspfShamNbrEntry 7 }

tmnxOspfShamNbrHelloSuppressed   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrHelloSuppressed indicates whether Hellos
         are being suppressed to the sham link neighbor"
    ::= { tmnxOspfShamNbrEntry 8 }

tmnxOspfShamNbrIfId              OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrIfId indicates the interface ID that the
         neighbor advertises in its Hello Packets on this sham link, that is,
         the neighbor's local interface ID."
    ::= { tmnxOspfShamNbrEntry 9 }

tmnxOspfShamNbrRestartHelperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
        notHelping (1),
        helping    (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrRestartHelperStatus indicates whether the
         router is acting as a Graceful restart helper for the sham link
         neighbor."
    ::= { tmnxOspfShamNbrEntry 10 }

tmnxOspfShamNbrRestartHelperAge  OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrRestartHelperAge indicates the remaining
         time in current OSPF Graceful restart interval, if the router is
         acting as a restart helper for the sham link neighbor."
    ::= { tmnxOspfShamNbrEntry 11 }

tmnxOspfShamNbrRestartHelperExitRc OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        inProgress      (2),
        completed       (3),
        timedOut        (4),
        topologyChanged (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrRestartHelperExitRc indicates the outcome
         of the last attempt at acting as a Graceful restart helper for the
         sham link neighbor.

              none             No restart has yet been attempted.
              inProgress       A restart attempt is currently underway.
              completed        The last restart completed successfully.
              timedOut         The last restart timed out.
              topologyChanged  The last restart was aborted due to
                               a topology change."
    ::= { tmnxOspfShamNbrEntry 12 }

tmnxOspfShamNbrUpTime            OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrUpTime indicates the uninterrupted time,
         in hundredths of seconds, the adjacency to this sham link neighbour
         has been up."
    ::= { tmnxOspfShamNbrEntry 13 }

tmnxOspfShamNbrLastEventTime     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrLastEventTime indicates the value of
         sysUpTime when the last event occurred that affected the adjacency to
         the sham link neighbour."
    ::= { tmnxOspfShamNbrEntry 14 }

tmnxOspfShamNbrDeadTmeOutstng    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrDeadTmeOutstng indicates the amount of
         time in seconds until the dead-router interval expires. Normally, this
         value should not be significantly smaller than the configured dead
         router interval minus one hello interval."
    ::= { tmnxOspfShamNbrEntry 15 }

tmnxOspfShamNbrLastRestartTime   OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrLastRestartTime indicates the last time
         the sham link neighbor attempted restart."
    ::= { tmnxOspfShamNbrEntry 16 }

tmnxOspfShamNbrRestartReason     OBJECT-TYPE
    SYNTAX      TmnxOspfRestartReasonTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrRestartReason indicates the OSPF sham link
         neighbor's graceful restart reason."
    ::= { tmnxOspfShamNbrEntry 17 }

tmnxOspfShamNbrStatsTable        OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfShamNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfShamNbrStatsTable provides an extension of the
         tmnxOspfShamNbrTable for statistics for an OSPF sham link neighbor."
    ::= { tmnxOspfObjects 29 }

tmnxOspfShamNbrStatsEntry        OBJECT-TYPE
    SYNTAX      TmnxOspfShamNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfShamNbrStatsTable represents additional
         columns for statistics for an OSPF sham link neighbor."
    AUGMENTS    { tmnxOspfShamNbrEntry }
    ::= { tmnxOspfShamNbrStatsTable 1 }

TmnxOspfShamNbrStatsEntry        ::= SEQUENCE
{
    tmnxOspfShamNbrEvents            Counter32,
    tmnxOspfShamNbrLsRetransQLen     Gauge32,
    tmnxOspfShamNbrBadNbrStates      Counter32,
    tmnxOspfShamNbrLsaInstallFail    Counter32,
    tmnxOspfShamNbrBadSeqNums        Counter32,
    tmnxOspfShamNbrBadMTUs           Counter32,
    tmnxOspfShamNbrBadPackets        Counter32,
    tmnxOspfShamNbrLsaNotInLsdbs     Counter32,
    tmnxOspfShamNbrOptionMismatch    Counter32,
    tmnxOspfShamNbrDuplicates        Counter32,
    tmnxOspfShamNbrNumRestarts       Counter32
}

tmnxOspfShamNbrEvents            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrEvents indicates the number of times this
         sham link has changed its state, or an error has occurred."
    ::= { tmnxOspfShamNbrStatsEntry 1 }

tmnxOspfShamNbrLsRetransQLen     OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrLsRetransQLen indicates the current length
         of the retransmission queue."
    ::= { tmnxOspfShamNbrStatsEntry 2 }

tmnxOspfShamNbrBadNbrStates      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrBadNbrStates indicates the total number of
         OSPF packets received when the sham link neighbor state was not
         expecting to receive this packet type since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 3 }

tmnxOspfShamNbrLsaInstallFail    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrLsaInstallFail indicates the total number
         of times when an LSA could not be installed into the LSDB due to a
         resource allocation issue since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 4 }

tmnxOspfShamNbrBadSeqNums        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrBadSeqNums indicates the total number of
         times when a database description packet was received with a sequence
         number mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 5 }

tmnxOspfShamNbrBadMTUs           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrBadMTUs indicates the total number of
         times when the MTU in a received database description packet was
         larger than the MTU of the receiving interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 6 }

tmnxOspfShamNbrBadPackets        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrBadPackets indicates the total number of
         times when an LS update was received with an illegal LS type or an
         option mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 7 }

tmnxOspfShamNbrLsaNotInLsdbs     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrLsaNotInLsdbs indicates the total number
         of times when an LS request was received for an LSA not installed in
         the LSDB of this router since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 8 }

tmnxOspfShamNbrOptionMismatch    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrOptionMismatch indicates the total number
         of times when a LS update was received with an option mismatch since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 9 }

tmnxOspfShamNbrDuplicates        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrDuplicates indicates the total number of
         times when a duplicate database description packet was received during
         the Exchange state since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 10 }

tmnxOspfShamNbrNumRestarts       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfShamNbrNumRestarts indicates the number of times
         the sham link neighbor has attempted restart since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfShamNbrStatsEntry 11 }

tmnxOspfNgLinkLsdbTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgLinkLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgLinkLsdbTable contains the OSPF Process's Link-Scope
         Link State Database."
    ::= { tmnxOspfObjects 30 }

tmnxOspfNgLinkLsdbEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfNgLinkLsdbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgLinkLsdbEntry contains information for a single
         Link-Scope Link State Advertisement."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNgLinkLsdbIfIndex,
        tmnxOspfNgLinkLsdbIfInstId,
        tmnxOspfNgLinkLsdbIfAreaId,
        tmnxOspfNgLinkLsdbType,
        tmnxOspfNgLinkLsdbRouterId,
        tmnxOspfNgLinkLsdbLsid
    }
    ::= { tmnxOspfNgLinkLsdbTable 1 }

TmnxOspfNgLinkLsdbEntry          ::= SEQUENCE
{
    tmnxOspfNgLinkLsdbIfIndex        InterfaceIndex,
    tmnxOspfNgLinkLsdbIfInstId       TmnxOspfIfInstIdTc,
    tmnxOspfNgLinkLsdbIfAreaId       TmnxOspfAreaIdTc,
    tmnxOspfNgLinkLsdbType           Unsigned32,
    tmnxOspfNgLinkLsdbRouterId       TmnxOspfRouterIdTc,
    tmnxOspfNgLinkLsdbLsid           Unsigned32,
    tmnxOspfNgLinkLsdbSequence       Integer32,
    tmnxOspfNgLinkLsdbAge            Integer32,
    tmnxOspfNgLinkLsdbChecksum       Integer32,
    tmnxOspfNgLinkLsdbAdvertisement  OCTET STRING,
    tmnxOspfNgLinkLsdbTypeKnown      TruthValue
}

tmnxOspfNgLinkLsdbIfIndex        OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbIfIndex specifies the identifier of the
         link from which the LSA was received."
    ::= { tmnxOspfNgLinkLsdbEntry 1 }

tmnxOspfNgLinkLsdbIfInstId       OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbIfInstId specifies the identifier of
         the interface instance from which the LSA was received."
    ::= { tmnxOspfNgLinkLsdbEntry 2 }

tmnxOspfNgLinkLsdbIfAreaId       OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbIfAreaId specifies specifies the OSPF
         Area Identifier."
    ::= { tmnxOspfNgLinkLsdbEntry 3 }

tmnxOspfNgLinkLsdbType           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbType specifies the type of the
         link state advertisement.  Each link state type has a separate
         advertisement format. Link-Scope LSAs unrecognized by the router
         are also stored in this database."
    ::= { tmnxOspfNgLinkLsdbEntry 4 }

tmnxOspfNgLinkLsdbRouterId       OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbRouterId specifies the 32-bit number
         that uniquely identifies the originating router in the Autonomous
         System."
    REFERENCE
        "OSPF Version 2, Appendix C.1 Global parameters"
    ::= { tmnxOspfNgLinkLsdbEntry 5 }

tmnxOspfNgLinkLsdbLsid           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbLsid specifies the Link State ID that
         is an LS Type Specific field containing a unique identifier; it
         identifies the piece of the routing domain that is being described by
         the advertisement. In OSPFv3, the LSID has no addressing semantics."
    ::= { tmnxOspfNgLinkLsdbEntry 6 }

tmnxOspfNgLinkLsdbSequence       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbSequence indicates the signed 32-bit
         integer sequence number field. It is used to detect old and duplicate
         link-state advertisements. The space of sequence numbers is linearly
         ordered. The larger the sequence number the more recent the
         advertisement."
    REFERENCE
        "OSPF Version  2,  Section  12.1.6  LS  sequence
         number"
    ::= { tmnxOspfNgLinkLsdbEntry 7 }

tmnxOspfNgLinkLsdbAge            OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbAge indicates the age of the link-state
         advertisement in seconds."
    REFERENCE
        "OSPF Version 2, Section 12.1.1 LS age"
    ::= { tmnxOspfNgLinkLsdbEntry 8 }

tmnxOspfNgLinkLsdbChecksum       OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbChecksum indicates the checksum
         of the complete contents of the advertisement, excepting the
         age field. The age field is excepted so that an advertisement's
         age can be incremented without updating the checksum.  The
         checksum used is the same that is used for ISO connectionless
         datagrams; it is commonly referred to as the Fletcher checksum."
    REFERENCE
        "OSPF Version 2, Section 12.1.7 LS checksum"
    ::= { tmnxOspfNgLinkLsdbEntry 9 }

tmnxOspfNgLinkLsdbAdvertisement  OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (1..65535))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbAdvertisement indicates the entire Link
         State Advertisement, including its header."
    ::= { tmnxOspfNgLinkLsdbEntry 10 }

tmnxOspfNgLinkLsdbTypeKnown      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgLinkLsdbTypeKnown indicates whether the LSA
         type is recognized by this Router."
    ::= { tmnxOspfNgLinkLsdbEntry 11 }

tmnxOspfNgIfTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgIfTable contains information about the interfaces
         associated with OSPF."
    REFERENCE
        "OSPF Version 2, Appendix C.3 Router interface parameters"
    ::= { tmnxOspfObjects 31 }

tmnxOspfNgIfEntry                OBJECT-TYPE
    SYNTAX      TmnxOspfNgIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgIfEntry contains information about one interface
         associated with OSPF."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNgIfIndex,
        tmnxOspfNgIfInstId,
        tmnxOspfNgIfAreaId
    }
    ::= { tmnxOspfNgIfTable 1 }

TmnxOspfNgIfEntry                ::= SEQUENCE
{
    tmnxOspfNgIfIndex                InterfaceIndex,
    tmnxOspfNgIfInstId               TmnxOspfIfInstIdTc,
    tmnxOspfNgIfAreaId               TmnxOspfAreaIdTc,
    tmnxOspfNgIfStatus               RowStatus,
    tmnxOspfNgIfLastChanged          TimeStamp,
    tmnxOspfNgIfCfgType              TmnxOspfIfTypeTc,
    tmnxOspfNgIfAdminState           Status,
    tmnxOspfNgIfRtrPriority          DesignatedRouterPriority,
    tmnxOspfNgIfTransitDelay         TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfNgIfRetransInterval      TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfNgIfHelloInterval        HelloRange,
    tmnxOspfNgIfRtrDeadInterval      TmnxOspfDeadIntRangeTc,
    tmnxOspfNgIfPollInterval         Unsigned32,
    tmnxOspfNgIfCfgMTU               Integer32,
    tmnxOspfNgIfCfgMetric            Metric,
    tmnxOspfNgIfPassive              TruthValue,
    tmnxOspfNgIfAdvtSubnet           TruthValue,
    tmnxOspfNgIfAuthType             TmnxOspfAuthenticationType,
    tmnxOspfNgIfAuthKey              OCTET STRING,
    tmnxOspfNgIfEnableBfd            TruthValue,
    tmnxOspfNgIfRemainDownOnFail     TruthValue,
    tmnxOspfNgIfInboundSAName        TNamedItemOrEmpty,
    tmnxOspfNgIfOutboundSAName       TNamedItemOrEmpty,
    tmnxOspfNgIfLoopfreeAltExclude   TruthValue,
    tmnxOspfNgIfLsaFilterOut         TmnxOspfLsaFilterOutTc,
    tmnxOspfNgIfAdvRtrCapability     TruthValue,
    tmnxOspfNgIfAuthKeyChain         TNamedItemOrEmpty,
    tmnxOspfNgIfRouteNHTemplate      TNamedItemOrEmpty,
    tmnxOspfNgIfPriorityUpdate       INTEGER,
    tmnxOspfNgIfSidType              INTEGER,
    tmnxOspfNgIfSidValue             Unsigned32,
    tmnxOspfNgIfSidProtection        INTEGER,
    tmnxOspfNgIfSidClearNFlag        TruthValue,
    tmnxOspfNgIfAdjSidType           INTEGER,
    tmnxOspfNgIfAdjSidValue          Unsigned32,
    tmnxOspfNgIfLBAdminWeight        Unsigned32
}

tmnxOspfNgIfIndex                OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfIndex specifies the interface index of
         this OSPF interface.  It corresponds to the interface index of the
         IP interface on which OSPF is configured."
    ::= { tmnxOspfNgIfEntry 1 }

tmnxOspfNgIfInstId               OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfInstId specifies the OSPF instance.  It
         enables multiple interface instances of OSPF to be run over a
         single link. Each protocol instance would be assigned a separate
         ID. This ID has local link significance only."
    ::= { tmnxOspfNgIfEntry 2 }

tmnxOspfNgIfAreaId               OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAreaId specifies a 32-bit integer uniquely
         identifying the area to which the interface connects. Area ID 0 is
         used for the OSPF backbone."
    ::= { tmnxOspfNgIfEntry 3 }

tmnxOspfNgIfStatus               OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfStatus controls creation and deletion of a
         row entry in this table."
    ::= { tmnxOspfNgIfEntry 4 }

tmnxOspfNgIfLastChanged          OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfNgIfEntry 5 }

tmnxOspfNgIfCfgType              OBJECT-TYPE
    SYNTAX      TmnxOspfIfTypeTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfCfgType specifies the OSPF interface type.

         The value of 'unspecified' sets the interface type to its default
         value based on the underlying physical interface type."
    ::= { tmnxOspfNgIfEntry 6 }

tmnxOspfNgIfAdminState           OBJECT-TYPE
    SYNTAX      Status
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAdminState specifies the OSPF interface's
         administrative status.  The value formed on the interface, and the
         interface will be advertised as an internal route to some area.
         The value 'disabled' denotes that the interface is external to OSPF."
    DEFVAL      { enabled }
    ::= { tmnxOspfNgIfEntry 7 }

tmnxOspfNgIfRtrPriority          OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRtrPriority specifies the priority of
         this interface.  Used in multi-access networks, this field is
         used in the designated router election algorithm. The value 0
         signifies that the router is not eligible to become the designated
         router on this particular network. In the event of a tie in
         this value, routers will use their Router ID as a tie breaker."
    DEFVAL      { 1 }
    ::= { tmnxOspfNgIfEntry 8 }

tmnxOspfNgIfTransitDelay         OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTransitDelay specifies the estimated number
         of seconds it takes to transmit a link state update packet over this
         interface."
    DEFVAL      { 1 }
    ::= { tmnxOspfNgIfEntry 9 }

tmnxOspfNgIfRetransInterval      OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc (1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRetransInterval specifies the number of
         seconds between link state advertisement retransmissions, for
         adjacencies belonging to this interface. This value is also used when
         retransmitting database description and link state request packets."
    DEFVAL      { 5 }
    ::= { tmnxOspfNgIfEntry 10 }

tmnxOspfNgIfHelloInterval        OBJECT-TYPE
    SYNTAX      HelloRange
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfHelloInterval specifies the length of time,
         in seconds, between the Hello packets that the router sends on the
         interface.  This value MUST be the same for all routers attached to
         a common network."
    DEFVAL      { 10 }
    ::= { tmnxOspfNgIfEntry 11 }

tmnxOspfNgIfRtrDeadInterval      OBJECT-TYPE
    SYNTAX      TmnxOspfDeadIntRangeTc
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRtrDeadInterval specifies the number of
         seconds that a router's Hello packets have not been seen before
         its neighbors declare the router down on the interface.  This
         should be some multiple of the Hello interval."
    DEFVAL      { 40 }
    ::= { tmnxOspfNgIfEntry 12 }

tmnxOspfNgIfPollInterval         OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfPollInterval specifies the larger time
         interval, in seconds, between the Hello packets sent to an inactive
         non-broadcast multi-access neighbor."
    DEFVAL      { 120 }
    ::= { tmnxOspfNgIfEntry 13 }

tmnxOspfNgIfCfgMTU               OBJECT-TYPE
    SYNTAX      Integer32 (0 | 512..9786)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfCfgMTU specifies the desired size of the
         largest packet which can be sent/received on this OSPF interface,
         specified in octets. This size DOES include the underlying IP header
         length, but not the underlying layer headers/trailers.

         Setting tmnxOspfNgIfCfgMTU to a value of zero (0), causes the agent to
         recalculate the default MTU size which can vary based on the current
         setting of tmnxPortMode and tmnxPortEncapType variables for the port
         to which this OSPF interface is bound."
    DEFVAL      { 0 }
    ::= { tmnxOspfNgIfEntry 14 }

tmnxOspfNgIfCfgMetric            OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfCfgMetric specifies the desired
         metric value assigned to this interface.  The default value
         '0' causes the value of the Metric to be calculated as
         (Reference Bandwidth / ifSpeed).  The value of the reference
         bandwidth is configured by the tmnxOspfReferenceBandwidth object."
    DEFVAL      { 0 }
    ::= { tmnxOspfNgIfEntry 15 }

tmnxOspfNgIfPassive              OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfPassive specifies whether or or not HELLOs
         are to be sent out on this interface and whether or not the router
         advertises it as STUB network/link in its router LSAs.  If true, no
         HELLOs will be sent, and the interface is advertised as a STUB link."
    DEFVAL      { false }
    ::= { tmnxOspfNgIfEntry 16 }

tmnxOspfNgIfAdvtSubnet           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAdvtSubnet specifies the advertisement
         method.  When tmnxOspfNgIfAdvtSubnet is set to 'true', OSPF will
         advertise the network number and netmask instead of the
         individual host-routes of an active point-to-point interface."
    REFERENCE
        "RFC2328 OSPF Version 2, s12.4.1.1 pg130"
    DEFVAL      { true }
    ::= { tmnxOspfNgIfEntry 17 }

tmnxOspfNgIfAuthType             OBJECT-TYPE
    SYNTAX      TmnxOspfAuthenticationType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAuthType specifies the authentication type to
         use for an interface.

         Note that this object can be used to engage in significant attacks
         against an OSPF router."
    REFERENCE
        "OSPF Version 2, Appendix D Authentication"
    DEFVAL      { none }
    ::= { tmnxOspfNgIfEntry 18 }

tmnxOspfNgIfAuthKey              OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..8))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAuthKey specifies the authentication key
         string.  The cleartext password is used as an OSPF Authentication
         key when simplePassword security is enabled. This object does not
         access any OSPF Cryptographic (e.g. MD5) Authentication Key under
         any circumstance.

         If the key length is shorter than 8 octets, the agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot use a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system. This
         authentication is only sufficient to protect against accidental
         misconfigurations because it reuses cleartext passwords. [RFC-1704]

         When read, tmnxOspfNgIfAuthKey always returns an Octet String of
         length zero.

         This object is valid only when tmnxOspfVersion has a value of
         'version2'."
    REFERENCE
        "OSPF Version 2, Section 9 The Interface Data Structure"
    DEFVAL      { '0000000000000000'H }
    ::= { tmnxOspfNgIfEntry 19 }

tmnxOspfNgIfEnableBfd            OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfEnableBfd specifies whether Bi-directional
         Forwarding Detection is enabled for Ipv4 in this OSPF interface.

         When the value is 'true', this interface can establish BFD sessions
         and use BFD as a signalling mechanism. When it is 'false', it cannot
         use BFD for Ipv4."
    DEFVAL      { false }
    ::= { tmnxOspfNgIfEntry 20 }

tmnxOspfNgIfRemainDownOnFail     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRemainDownOnFail specifies whether an OSPF
         adjacency should go down when the BFD session to the peer goes down."
    DEFVAL      { false }
    ::= { tmnxOspfNgIfEntry 21 }

tmnxOspfNgIfInboundSAName        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfInboundSAName specifies the manually
         configured IPsec Security Association name in case the Ospfv3 traffic
         on the [interface] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfEntry 22 }

tmnxOspfNgIfOutboundSAName       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfOutboundSAName specifies the manually
         configured IPsec Security Association name in case the Ospfv3 traffic
         on the [interface] has to be authenticated.

         This object is only valid when tmnxOspfVersion has a value of
         'version3'."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfEntry 23 }

tmnxOspfNgIfLoopfreeAltExclude   OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLoopfreeAltExclude specifies whether or not
         the OSPF interface should be excluded during LFA calculations. If the
         value is 'true', the OSPF interface is excluded from LFA calculations.
         If the value is 'false', the OSPF interface is included in LFA
         calculations.

         The value of tmnxOspfNgIfLoopfreeAltExclude is only valid when
         tmnxOspfLoopfreeAlternate has a value of 'true'."
    DEFVAL      { false }
    ::= { tmnxOspfNgIfEntry 24 }

tmnxOspfNgIfLsaFilterOut         OBJECT-TYPE
    SYNTAX      TmnxOspfLsaFilterOutTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLsaFilterOut specifies whether or not flooded
         LSAs should be sent to any adjacent neighbor on the OSPF interface.

         If the value is 'none', then flooded LSAs are sent out on the OSPF
         interface.

         If the value is 'all', then flooded LSAs are not sent out on the OSPF
         interface.

         If the value is 'exceptOwnRtrLsa', then no LSAs other than own router
         LSAs are sent out on the OSPF interface.

         If the value is 'exceptOwnRtrLsaAndDefaults', then no LSAs other than
         type-3-default, type-5-default, type-7-default and own router LSAs are
         sent out on the OSPF interface."
    DEFVAL      { none }
    ::= { tmnxOspfNgIfEntry 25 }

tmnxOspfNgIfAdvRtrCapability     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAdvRtrCapability specifies whether or not
         advertise-router-capabilities are enabled at interface level."
    DEFVAL      { true }
    ::= { tmnxOspfNgIfEntry 26 }

tmnxOspfNgIfAuthKeyChain         OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAuthKeyChain specifies the keychain which
         will be used to sign and/or authenticate the OSPF protocol stream.

         The keychain name is defined by tmnxKeyChainName and is the index for
         TIMETRA-SECURITY-MIB::tmnxKeyChainTable."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfEntry 27 }

tmnxOspfNgIfRouteNHTemplate      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRouteNHTemplate specifies the next-hop
         template that must be applied to the prefixes which primary next-hop
         uses this interface name.

         The next-hop template name is defined by tmnxRouteNHTemplateName and
         is the index for
         TIMETRA-ROUTE-NEXT-HOP-TEMPLATE-MIB::tmnxRouteNHTemplateTable."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfEntry 28 }

tmnxOspfNgIfPriorityUpdate       OBJECT-TYPE
    SYNTAX      INTEGER {
        none (1),
        high (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfPriorityUpdate specifies whether or not
         routes via this interface should get priority when downloading to FIB.
         If the value is 'high', then these routes are downloaded to FIB before
         other routes. "
    DEFVAL      { none }
    ::= { tmnxOspfNgIfEntry 29 }

tmnxOspfNgIfSidType              OBJECT-TYPE
    SYNTAX      INTEGER {
        none  (0),
        index (1),
        label (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfSidType specifies whether the
         object tmnxOspfNgIfSidValue is not valid, an index value or an
         absolute label value."
    DEFVAL      { none }
    ::= { tmnxOspfNgIfEntry 30 }

tmnxOspfNgIfSidValue             OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfSidValue together with
         tmnxOspfNgIfSidType specifies the SID value or index for this
         interface. "
    DEFVAL      { 0 }
    ::= { tmnxOspfNgIfEntry 31 }

tmnxOspfNgIfSidProtection        OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        disabled (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfSidProtection specifies whether
         the SID needs to be advertised with protection enabled or disabled.

         If the value of tmnxOspfNgIfSidProtection is set to disabled, no
         protection is calculated and a single SID with B-flag cleared is sent
         in adjacency SID sub-TLV.

         If the value of tmnxOspfNgIfSidProtection is set to enabled, SID
         protection is provided and a single SID with B-flag set is sent in
         adjacency SID sub-TLV."
    DEFVAL      { enabled }
    ::= { tmnxOspfNgIfEntry 32 }

tmnxOspfNgIfSidClearNFlag        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfSidClearNFlag specifies whether the node-sid
         flag (N-flag) should be cleared in a prefix SID sub-TLV.

         When the value of tmnxOspfNgIfSidClearNFlag is false, the prefix SID
         sub-TLV for the prefix of a loopback interface is tagged as a node SID
         meaning that it belongs to this node only.

         When the value of tmnxOspfNgIfSidClearNFlag is true, the same prefix
         SID sub-TLV may be advertised by multiple nodes."
    DEFVAL      { false }
    ::= { tmnxOspfNgIfEntry 33 }

tmnxOspfNgIfAdjSidType           OBJECT-TYPE
    SYNTAX      INTEGER {
        none  (0),
        label (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfAdjSidType specifies whether the
         object tmnxOspfNgIfAdjSidValue is not valid, an index value or an
         absolute label value."
    DEFVAL      { none }
    ::= { tmnxOspfNgIfEntry 34 }

tmnxOspfNgIfAdjSidValue          OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfAdjSidValue together with
         tmnxOspfNgIfAdjSidType specifies the static adjacency SID value  or
         index to be used for this adjacency. "
    DEFVAL      { 0 }
    ::= { tmnxOspfNgIfEntry 35 }

tmnxOspfNgIfLBAdminWeight        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgIfLBAdminWeight specifies an
         explicit load-balancing-weight for this interface."
    DEFVAL      { 0 }
    ::= { tmnxOspfNgIfEntry 37 }

tmnxOspfNgIfOperTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgIfOperEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgIfOperTable provides an extension of the
         tmnxOspfNgIfTable for operational states of an OSPF interface."
    ::= { tmnxOspfObjects 32 }

tmnxOspfNgIfOperEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfNgIfOperEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfNgIfOperTable represents additional
         columns for statistics for an OSPF interface."
    AUGMENTS    { tmnxOspfNgIfEntry }
    ::= { tmnxOspfNgIfOperTable 1 }

TmnxOspfNgIfOperEntry            ::= SEQUENCE
{
    tmnxOspfNgIfState                INTEGER,
    tmnxOspfNgIfLastEnabledTime      TimeStamp,
    tmnxOspfNgIfOperMTU              Integer32,
    tmnxOspfNgIfMetricValue          Metric,
    tmnxOspfNgIfDRId                 TmnxOspfRouterIdTc,
    tmnxOspfNgIfDRIpAddrType         InetAddressType,
    tmnxOspfNgIfDRIpAddr             InetAddress,
    tmnxOspfNgIfBDRId                TmnxOspfRouterIdTc,
    tmnxOspfNgIfBDRIpAddrType        InetAddressType,
    tmnxOspfNgIfBDRIpAddr            InetAddress,
    tmnxOspfNgIfLinkLsaCount         Gauge32,
    tmnxOspfNgIfLinkLsaCksumSum      Integer32,
    tmnxOspfNgIfMD5TransmitKeyId     TmnxOspfIfMD5KeyId,
    tmnxOspfNgIfLocalIpAddressType   InetAddressType,
    tmnxOspfNgIfLocalIpAddress       InetAddress,
    tmnxOspfNgIfMD5NumKeys           Gauge32,
    tmnxOspfNgIfType                 TmnxOspfIfTypeTc,
    tmnxOspfNgIfTeMetric             Unsigned32,
    tmnxOspfNgIfTeState              TmnxOperState,
    tmnxOspfNgIfAdminGroup           Unsigned32,
    tmnxOspfNgIfLdpSyncState         TmnxOperState,
    tmnxOspfNgIfLdpSyncMaxMetric     TruthValue,
    tmnxOspfNgIfLdpSyncTimerState    INTEGER,
    tmnxOspfNgIfLdpSyncTimeLeft      Unsigned32,
    tmnxOspfNgIfOperInbSAName        TNamedItemOrEmpty,
    tmnxOspfNgIfOperInbSANameTemp    TNamedItemOrEmpty,
    tmnxOspfNgIfOperOutbSAName       TNamedItemOrEmpty
}

tmnxOspfNgIfState                OBJECT-TYPE
    SYNTAX      INTEGER {
        down                   (1),
        loopback               (2),
        waiting                (3),
        pointToPoint           (4),
        designatedRouter       (5),
        backupDesignatedRouter (6),
        otherDesignatedRouter  (7)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The OSPF Interface State."
    ::= { tmnxOspfNgIfOperEntry 1 }

tmnxOspfNgIfLastEnabledTime      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLastEnabledTime indicates the sysUpTime value
         when ospfIfAdminStat was last set to enabled (1) to run the ospf on
         this interface."
    ::= { tmnxOspfNgIfOperEntry 2 }

tmnxOspfNgIfOperMTU              OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfOperMTU indicates the operational size of the
         largest packet which can be sent/received on this OSPF interface,
         specified in octets. This size DOES include the underlying IP header
         length, but not the underlying layer headers/trailers."
    ::= { tmnxOspfNgIfOperEntry 3 }

tmnxOspfNgIfMetricValue          OBJECT-TYPE
    SYNTAX      Metric
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfMetricValue indicates the metric value
         this interface is using.  The default value of the Metric is
         (Reference Bandwidth / ifSpeed).  The value of the reference
         bandwidth is configured by the tmnxOspfReferenceBandwidth object."
    ::= { tmnxOspfNgIfOperEntry 4 }

tmnxOspfNgIfDRId                 OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfDRId indicates the Router ID of the
         Designated Router."
    ::= { tmnxOspfNgIfOperEntry 5 }

tmnxOspfNgIfDRIpAddrType         OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfDRIpAddrType type indicates the IP address
         type of tmnxOspfNgIfDRIpAddr."
    ::= { tmnxOspfNgIfOperEntry 6 }

tmnxOspfNgIfDRIpAddr             OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfDRIpAddr indicates the IP address of the
         Designated Router."
    ::= { tmnxOspfNgIfOperEntry 7 }

tmnxOspfNgIfBDRId                OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBDRId indicates the Router ID of the Backup
         Designated Router."
    ::= { tmnxOspfNgIfOperEntry 8 }

tmnxOspfNgIfBDRIpAddrType        OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBDRIpAddrType indicates the IP address type
         of the Backup Designated Router."
    ::= { tmnxOspfNgIfOperEntry 9 }

tmnxOspfNgIfBDRIpAddr            OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBDRIpAddr indicates the IP address of the
         Backup Designated Router."
    ::= { tmnxOspfNgIfOperEntry 10 }

tmnxOspfNgIfLinkLsaCount         OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLinkLsaCount indicates the total number of
         Link-Scope link-state advertisements in this link's link-state
         database."
    ::= { tmnxOspfNgIfOperEntry 11 }

tmnxOspfNgIfLinkLsaCksumSum      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLinkLsaCksumSum indicates the 32-bit
         unsigned sum of the Link-Scope link-state advertisements' LS
         checksums contained in this link's link-state database.  The
         sum can be used to determine if there has been a change in a
         router's link-state database, and to compare the link state
         database of two routers."
    ::= { tmnxOspfNgIfOperEntry 12 }

tmnxOspfNgIfMD5TransmitKeyId     OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5TransmitKeyId indicates the index value
         used to access the row entry in the tmnxOspfNgIfMD5KeyTable that
         specifies the authentication type and key transmitted on this
         OSPF interface.  This object is valid only when tmnxOspfVersion
         has the value 'version2'.

         If tmnxOspfNgIfMD5TransmitKeyId has a value of 0, it means that no
         keys are configured."
    ::= { tmnxOspfNgIfOperEntry 13 }

tmnxOspfNgIfLocalIpAddressType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLocalIpAddressType indicates the IP address
         type of tmnxOspfNgIfLocalIpAddress."
    ::= { tmnxOspfNgIfOperEntry 14 }

tmnxOspfNgIfLocalIpAddress       OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLocalIpAddress indicates the IP address of
         this OSPF local link interface."
    ::= { tmnxOspfNgIfOperEntry 15 }

tmnxOspfNgIfMD5NumKeys           OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5NumKeys indicates the number of MD5 Key
         entries for this OSPF interface."
    ::= { tmnxOspfNgIfOperEntry 16 }

tmnxOspfNgIfType                 OBJECT-TYPE
    SYNTAX      TmnxOspfIfTypeTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfType indicates the operational OSPF interface
         type."
    ::= { tmnxOspfNgIfOperEntry 17 }

tmnxOspfNgIfTeMetric             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..16777215)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTeMetric indicates the MPLS TE metric
         configured for this interface. This metric is flooded out in the TE
         metric sub-tlv in the OSPF TE LSAs. Depending on the configuration,
         either the TE metric value or the native OSPF metric value is used in
         CSPF computations."
    ::= { tmnxOspfNgIfOperEntry 18 }

tmnxOspfNgIfTeState              OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTeState indicates the MPLS interface TE
         status from OSPF standpoint."
    ::= { tmnxOspfNgIfOperEntry 19 }

tmnxOspfNgIfAdminGroup           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAdminGroup indicates the bit-map inherited
         from MPLS interface that identifies the admin groups to which this
         interface belongs. If bit 'n' is set, then the interface belongs to
         the admin group with value 'n'."
    ::= { tmnxOspfNgIfOperEntry 20 }

tmnxOspfNgIfLdpSyncState         OBJECT-TYPE
    SYNTAX      TmnxOperState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLdpSyncState indicates if IGP-LDP
         synchronization is enabled on this interface. tmnxOspfNgIfLdpSyncState
         is derived from tmnxOspfLdpSyncAdminState and also whether it was
         enabled at the IP layer from OSPF standpoint."
    ::= { tmnxOspfNgIfOperEntry 21 }

tmnxOspfNgIfLdpSyncMaxMetric     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLdpSyncMaxMetric indicates if OSPF advertised
         maximum metric value for the interface, depending on whether
         tmnxOspfNgIfLdpSyncState is enabled on this interface."
    ::= { tmnxOspfNgIfOperEntry 22 }

tmnxOspfNgIfLdpSyncTimerState    OBJECT-TYPE
    SYNTAX      INTEGER {
        waitForLdpAdj (1),
        timerActive   (2),
        ldpExchgDone  (3),
        timerExpired  (4),
        manualExit    (5),
        disabled      (6)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLdpSyncTimerState indicates the state of the
         tmnxOspfNgIfLdpSyncTimeLeft on this OSPF interface."
    ::= { tmnxOspfNgIfOperEntry 23 }

tmnxOspfNgIfLdpSyncTimeLeft      OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..1800)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLdpSyncTimeLeft indicates the time left
         before OSPF reverts back to advertising normal metric for this
         interface. This is applicable only when tmnxOspfNgIfLdpSyncMaxMetric
         is 'true'."
    ::= { tmnxOspfNgIfOperEntry 24 }

tmnxOspfNgIfOperInbSAName        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfOperInbSAName indicates the name of the
         operational inbound manual IPsec Security Association, used for
         authenticating inbound Ospfv3 traffic."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfOperEntry 25 }

tmnxOspfNgIfOperInbSANameTemp    OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfOperInbSANameTemp indicates the name of a
         temporary operational inbound manual IPsec Security Association, used
         for authenticating inbound Ospfv3 traffic.

         This field can only contain a value when the key-rollover mechanism is
         ongoing."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfOperEntry 26 }

tmnxOspfNgIfOperOutbSAName       OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfOperOutbSAName indicates the name of the
         operational outbound manual IPsec Security Association, used for
         authenticating outbound Ospfv3 traffic. When the key-rollover mechanism
         is ongoing, the value can  temporarily be different from the value of
         the tmnxOspfNgIfOutboundSAName field."
    DEFVAL      { ''H }
    ::= { tmnxOspfNgIfOperEntry 27 }

tmnxOspfNgIfStatsTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgIfStatsTable provides an extension of the
         tmnxOspfNgIfTable for statistics for an OSPF interface."
    ::= { tmnxOspfObjects 33 }

tmnxOspfNgIfStatsEntry           OBJECT-TYPE
    SYNTAX      TmnxOspfNgIfStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfNgIfStatsTable represents additional
         columns for statistics for an OSPF interface."
    AUGMENTS    { tmnxOspfNgIfEntry }
    ::= { tmnxOspfNgIfStatsTable 1 }

TmnxOspfNgIfStatsEntry           ::= SEQUENCE
{
    tmnxOspfNgIfEvents               Counter32,
    tmnxOspfNgIfTxPackets            Counter32,
    tmnxOspfNgIfTxHellos             Counter32,
    tmnxOspfNgIfTxDBDs               Counter32,
    tmnxOspfNgIfTxLSRs               Counter32,
    tmnxOspfNgIfTxLSUs               Counter32,
    tmnxOspfNgIfTxLSAcks             Counter32,
    tmnxOspfNgIfRxPackets            Counter32,
    tmnxOspfNgIfRxHellos             Counter32,
    tmnxOspfNgIfRxDBDs               Counter32,
    tmnxOspfNgIfRxLSRs               Counter32,
    tmnxOspfNgIfRxLSUs               Counter32,
    tmnxOspfNgIfRxLSAcks             Counter32,
    tmnxOspfNgIfDiscardPackets       Counter32,
    tmnxOspfNgIfRetransmitOuts       Counter32,
    tmnxOspfNgIfBadVersions          Counter32,
    tmnxOspfNgIfBadNetworks          Counter32,
    tmnxOspfNgIfBadVirtualLinks      Counter32,
    tmnxOspfNgIfBadAreas             Counter32,
    tmnxOspfNgIfBadDstAddrs          Counter32,
    tmnxOspfNgIfBadNeighbors         Counter32,
    tmnxOspfNgIfBadPacketTypes       Counter32,
    tmnxOspfNgIfNeighborCount        Integer32,
    tmnxOspfNgIfLastEventTime        TimeStamp,
    tmnxOspfNgIfBadLengths           Counter32,
    tmnxOspfNgIfBadHelloIntervals    Counter32,
    tmnxOspfNgIfBadDeadIntervals     Counter32,
    tmnxOspfNgIfBadOptions           Counter32,
    tmnxOspfNgIfRxBadChecksums       Counter32,
    tmnxOspfNgIfBadAuthTypes         Counter32,
    tmnxOspfNgIfAuthFailures         Counter32
}

tmnxOspfNgIfEvents               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfEvents indicates the number of times this
         OSPF interface has changed its state, or an error has occurred."
    ::= { tmnxOspfNgIfStatsEntry 1 }

tmnxOspfNgIfTxPackets            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxPackets indicates the total number of OSPF
         packets transmitted on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 2 }

tmnxOspfNgIfTxHellos             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxHellos indicates the total number of OSPF
         Hello packets transmitted on this interface since tmnxOspfAdminState
         was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 3 }

tmnxOspfNgIfTxDBDs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxDBDs indicates the total number of OSPF
         Database Description packets transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 4 }

tmnxOspfNgIfTxLSRs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxLSRs indicates the total number of OSPF
         Link State Requests (LSRs)transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 5 }

tmnxOspfNgIfTxLSUs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxLSUs indicates the total number of OSPF
         Link State Updates (LSUs) transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 6 }

tmnxOspfNgIfTxLSAcks             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfTxLSAcks indicates the total number of OSPF
         Link State Acknowledgements transmitted on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 7 }

tmnxOspfNgIfRxPackets            OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxPackets indicates the total number of OSPF
         packets received on this interface since tmnxOspfAdminState was last
         set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 8 }

tmnxOspfNgIfRxHellos             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxHellos indicates the total number of OSPF
         Hello packets received on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 9 }

tmnxOspfNgIfRxDBDs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxDBDs indicates the total number of
         OSPF Database Description packets  received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 10 }

tmnxOspfNgIfRxLSRs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxLSRs indicates the total number of Link
         State Requests (LSRs) received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 11 }

tmnxOspfNgIfRxLSUs               OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxLSUs indicates the total number of Link
         State Updates (LSUs) received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 12 }

tmnxOspfNgIfRxLSAcks             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxLSAcks indicates the total number of Link
         State Acknowledgements received on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 13 }

tmnxOspfNgIfDiscardPackets       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfDiscardPackets indicates the total number of
         OSPF packets discarded on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 14 }

tmnxOspfNgIfRetransmitOuts       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRetransmitOuts indicates the total number of
         OSPF Retransmits sent on this interface since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 15 }

tmnxOspfNgIfBadVersions          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadVersions indicates the total number of
         OSPF packets received with bad OSPF version numbers since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 16 }

tmnxOspfNgIfBadNetworks          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadNetworks indicates the total number of
         OSPF packets received with invalid network or mask since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 17 }

tmnxOspfNgIfBadVirtualLinks      OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadVirtualLinks indicates the total number of
         OSPF packets received on this interface that are destined to a virtual
         link that does not exist since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 18 }

tmnxOspfNgIfBadAreas             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadAreas indicates the total number of OSPF
         packets received with an area mismatch since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 19 }

tmnxOspfNgIfBadDstAddrs          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadDstAddrs indicates the total number of
         OSPF packets received with the incorrect IP destination address since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 20 }

tmnxOspfNgIfBadNeighbors         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadNeighbors indicates the total number of
         OSPF packets received where the neighbor information does not match
         the information this router has for the neighbor since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 21 }

tmnxOspfNgIfBadPacketTypes       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadPacketTypes indicates the total number of
         OSPF packets received with an invalid OSPF packet type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 22 }

tmnxOspfNgIfNeighborCount        OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfNeighborCount indicates the total number of
         OSPF neighbors adjacent on this interface, in a state of INIT or
         greater, since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 23 }

tmnxOspfNgIfLastEventTime        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfLastEventTime indicates the value of
         sysUpTime when an event was last associated with this OSPF interface."
    ::= { tmnxOspfNgIfStatsEntry 24 }

tmnxOspfNgIfBadLengths           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadLengths indicates the total number of OSPF
         packets received on this interface with a total length not equal to
         the length given in the packet itself since tmnxOspfAdminState was
         last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 25 }

tmnxOspfNgIfBadHelloIntervals    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadHelloIntervals indicates the total number
         of OSPF packets received where the hello interval given in packet was
         not equal to that configured on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 26 }

tmnxOspfNgIfBadDeadIntervals     OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadDeadIntervals indicates the total number
         of OSPF packets received where the dead interval given in the packet
         was not equal to that configured on this interface since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 27 }

tmnxOspfNgIfBadOptions           OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadOptions indicates the total number of OSPF
         packets received with an option that does not match those configured
         for this interface or area since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 28 }

tmnxOspfNgIfRxBadChecksums       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfRxBadChecksums indicates the count of LSAs
         received with bad checksums."
    ::= { tmnxOspfNgIfStatsEntry 29 }

tmnxOspfNgIfBadAuthTypes         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfBadAuthTypes indicates the total number of
         OSPF packets received with an invalid authorization type since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 30 }

tmnxOspfNgIfAuthFailures         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfAuthFailures indicates the total number of
         OSPF packets received with an invalid authorization key since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgIfStatsEntry 31 }

tmnxOspfNgNbrTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgNbrTable contains information about non-virtual
         neighbors."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data
         Structure"
    ::= { tmnxOspfObjects 34 }

tmnxOspfNgNbrEntry               OBJECT-TYPE
    SYNTAX      TmnxOspfNgNbrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgNbrEntry contains information regarding a single
         non-virtual neighbor."
    REFERENCE
        "OSPF Version 2, Section 10 The Neighbor Data
         Structure"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNgNbrIfIndex,
        tmnxOspfNgNbrIfInstId,
        tmnxOspfNgNbrIfAreaId,
        tmnxOspfNgNbrRtrId
    }
    ::= { tmnxOspfNgNbrTable 1 }

TmnxOspfNgNbrEntry               ::= SEQUENCE
{
    tmnxOspfNgNbrIfIndex             InterfaceIndex,
    tmnxOspfNgNbrIfInstId            TmnxOspfIfInstIdTc,
    tmnxOspfNgNbrIfAreaId            TmnxOspfAreaIdTc,
    tmnxOspfNgNbrRtrId               TmnxOspfRouterIdTc,
    tmnxOspfNgNbrAddressType         InetAddressType,
    tmnxOspfNgNbrAddress             InetAddress,
    tmnxOspfNgNbrOptions             Integer32,
    tmnxOspfNgNbrPriority            DesignatedRouterPriority,
    tmnxOspfNgNbrState               INTEGER,
    tmnxOspfNgNbrHelloSuppressed     TruthValue,
    tmnxOspfNgNbrIfId                InterfaceIndexOrZero,
    tmnxOspfNgNbrRestartHelperStatus INTEGER,
    tmnxOspfNgNbrRestartHelperAge    TmnxOspfUpToRefreshIntervalTc,
    tmnxOspfNgNbrRestartHelperExitRc INTEGER,
    tmnxOspfNgNbrUpTime              TimeInterval,
    tmnxOspfNgNbrLastEventTime       TimeStamp,
    tmnxOspfNgNbrDeadTimeOutstanding Unsigned32,
    tmnxOspfNgNbrLastRestartTime     TimeStamp,
    tmnxOspfNgNbrRestartReason       TmnxOspfRestartReasonTc,
    tmnxOspfNgNbrBfdTracking         TruthValue,
    tmnxOspfNgNbrDrId                TmnxOspfRouterIdTc,
    tmnxOspfNgNbrBdrId               TmnxOspfRouterIdTc,
    tmnxOspfNgNbrSidType             INTEGER,
    tmnxOspfNgNbrSidValue            Unsigned32
}

tmnxOspfNgNbrIfIndex             OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrIfIndex specifies the local link ID of the
         link over which the neighbor can be reached."
    ::= { tmnxOspfNgNbrEntry 1 }

tmnxOspfNgNbrIfInstId            OBJECT-TYPE
    SYNTAX      TmnxOspfIfInstIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrIfInstId specifies the interface instance
         over which the neighbor can be reached.  This ID has local link
         significance only."
    ::= { tmnxOspfNgNbrEntry 2 }

tmnxOspfNgNbrIfAreaId            OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrIfAreaId specifies the OSPF Area Identifier."
    ::= { tmnxOspfNgNbrEntry 3 }

tmnxOspfNgNbrRtrId               OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrRtrId specifies a 32-bit integer uniquely
         identifying the neighboring router in the Autonomous System."
    ::= { tmnxOspfNgNbrEntry 4 }

tmnxOspfNgNbrAddressType         OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrAddressType indicates the address type of
         tmnxOspfNgNbrAddress. For addresses of IPv6 type only addresses with
         zone index are expected."
    ::= { tmnxOspfNgNbrEntry 5 }

tmnxOspfNgNbrAddress             OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrAddress indicates the IP address of the
         neighbor associated with the local link."
    ::= { tmnxOspfNgNbrEntry 6 }

tmnxOspfNgNbrOptions             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrOptions indicates a Bit Mask corresponding
         to the neighbor's options field."
    REFERENCE
        "OSPF Version 3, Appendix A.2 the Options field"
    ::= { tmnxOspfNgNbrEntry 7 }

tmnxOspfNgNbrPriority            OBJECT-TYPE
    SYNTAX      DesignatedRouterPriority
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrPriority indicates the priority of this
         neighbor in the designated router election algorithm.  The value
         0 signifies that the neighbor is not eligible to become the
         designated router on this particular network."
    ::= { tmnxOspfNgNbrEntry 8 }

tmnxOspfNgNbrState               OBJECT-TYPE
    SYNTAX      INTEGER {
        down          (1),
        attempt       (2),
        init          (3),
        twoWay        (4),
        exchangeStart (5),
        exchange      (6),
        loading       (7),
        full          (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrState indicates the State of the
         relationship with this Neighbor."
    REFERENCE
        "OSPF Version 2, Section 10.1 Neighbor States"
    ::= { tmnxOspfNgNbrEntry 9 }

tmnxOspfNgNbrHelloSuppressed     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrHelloSuppressed indicates whether Hellos are
         being suppressed to the neighbor."
    ::= { tmnxOspfNgNbrEntry 10 }

tmnxOspfNgNbrIfId                OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrIfId indicates the interface ID that the
         neighbor advertises in its Hello Packets on this link, that is, the
         neighbor's local interface index."
    ::= { tmnxOspfNgNbrEntry 11 }

tmnxOspfNgNbrRestartHelperStatus OBJECT-TYPE
    SYNTAX      INTEGER {
        notHelping (1),
        helping    (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrRestartHelperStatus indicates whether the
         router is acting as a Graceful restart helper for the neighbor."
    ::= { tmnxOspfNgNbrEntry 12 }

tmnxOspfNgNbrRestartHelperAge    OBJECT-TYPE
    SYNTAX      TmnxOspfUpToRefreshIntervalTc
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrRestartHelperAge indicates the remaining
         time in the current OSPF Graceful restart interval, if the router is
         acting as a restart helper for the neighbor."
    ::= { tmnxOspfNgNbrEntry 13 }

tmnxOspfNgNbrRestartHelperExitRc OBJECT-TYPE
    SYNTAX      INTEGER {
        none            (1),
        inProgress      (2),
        completed       (3),
        timedOut        (4),
        topologyChanged (5)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrRestartHelperExitRc indicates the outcome of
         the last attempt at acting as a Graceful restart helper for the
         neighbor.

              none             No restart has yet been attempted.
              inProgress       A restart attempt is currently underway.
              completed        The last restart completed successfully.
              timedOut         The last restart timed out.
              topologyChanged  The last restart was aborted due to
                               a topology change."
    ::= { tmnxOspfNgNbrEntry 14 }

tmnxOspfNgNbrUpTime              OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrUpTime indicates the uninterrupted time, in
         hundredths of seconds, the adjacency to this neighbour has been up."
    ::= { tmnxOspfNgNbrEntry 15 }

tmnxOspfNgNbrLastEventTime       OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrLastEventTime indicates the value of
         sysUpTime when the last event occurred that affected the adjacency to
         the neighbour."
    ::= { tmnxOspfNgNbrEntry 16 }

tmnxOspfNgNbrDeadTimeOutstanding OBJECT-TYPE
    SYNTAX      Unsigned32 (0..2147483647)
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrDeadTimeOutstanding indicates the amount
         of time in seconds until the  dead-router interval expires. Normally,
         this value should not be significantly smaller than the configured
         dead router interval minus one hello interval."
    ::= { tmnxOspfNgNbrEntry 17 }

tmnxOspfNgNbrLastRestartTime     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrLastRestartTime indicates the last time the
         neighbor attempted restart."
    ::= { tmnxOspfNgNbrEntry 18 }

tmnxOspfNgNbrRestartReason       OBJECT-TYPE
    SYNTAX      TmnxOspfRestartReasonTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrRestartReason indicates the OSPF neighbor's
         graceful restart reason."
    ::= { tmnxOspfNgNbrEntry 19 }

tmnxOspfNgNbrBfdTracking         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBfdTracking indicates whether a BFD session
         is being maintained to track the forwarding path to this neighbor or
         not."
    ::= { tmnxOspfNgNbrEntry 20 }

tmnxOspfNgNbrDrId                OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrDrId indicates the DR value advertised in
         the HELLO packets received from the OSPF neighbor. If it is not a
         broadcast interface tmnxOspfNgNbrDrId will be zero."
    ::= { tmnxOspfNgNbrEntry 21 }

tmnxOspfNgNbrBdrId               OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBdrId indicates the BDR value advertised in
         the HELLO packets received from the OSPF neighbor. If it is not a
         broadcast interface tmnxOspfNgNbrBdrId will be zero."
    ::= { tmnxOspfNgNbrEntry 22 }

tmnxOspfNgNbrSidType             OBJECT-TYPE
    SYNTAX      INTEGER {
        none      (0),
        index     (1),
        mplsLabel (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrSidType indicates how the value of
         tmnxOspfNgNbrSidValue shall be interpreted."
    DEFVAL      { none }
    ::= { tmnxOspfNgNbrEntry 23 }

tmnxOspfNgNbrSidValue            OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfNgNbrSidValue indicates the IPv4 SID
         label or index for this adjacency."
    DEFVAL      { 0 }
    ::= { tmnxOspfNgNbrEntry 24 }

tmnxOspfNgNbrStatsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgNbrStatsTable provides an extension of the
         tmnxOspfNgNbrTable for statistics for an OSPF neighbor."
    ::= { tmnxOspfObjects 35 }

tmnxOspfNgNbrStatsEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfNgNbrStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfNgNbrStatsTable represents additional
         columns for statistics for an OSPF neighbor."
    AUGMENTS    { tmnxOspfNgNbrEntry }
    ::= { tmnxOspfNgNbrStatsTable 1 }

TmnxOspfNgNbrStatsEntry          ::= SEQUENCE
{
    tmnxOspfNgNbrEvents              Counter32,
    tmnxOspfNgNbrLsRetransQLen       Gauge32,
    tmnxOspfNgNbrBadNbrStates        Counter32,
    tmnxOspfNgNbrLsaInstallFailed    Counter32,
    tmnxOspfNgNbrBadSeqNums          Counter32,
    tmnxOspfNgNbrBadMTUs             Counter32,
    tmnxOspfNgNbrBadPackets          Counter32,
    tmnxOspfNgNbrLsaNotInLsdbs       Counter32,
    tmnxOspfNgNbrOptionMismatches    Counter32,
    tmnxOspfNgNbrDuplicates          Counter32,
    tmnxOspfNgNbrNumRestarts         Counter32
}

tmnxOspfNgNbrEvents              OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrEvents indicates the number of times this
         neighbor relationship has changed state, or an error has occurred."
    ::= { tmnxOspfNgNbrStatsEntry 1 }

tmnxOspfNgNbrLsRetransQLen       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrLsRetransQLen indicates the current length
         of the retransmission queue."
    ::= { tmnxOspfNgNbrStatsEntry 2 }

tmnxOspfNgNbrBadNbrStates        OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBadNbrStates indicates the total number of
         OSPF packets received when the neighbor state was not expecting to
         receive this packet type since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 3 }

tmnxOspfNgNbrLsaInstallFailed    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrLsaInstallFailed indicates the total number
         of times an LSA could not be installed into the LSDB due to a resource
         allocation issue since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 4 }

tmnxOspfNgNbrBadSeqNums          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBadSeqNums indicates the total number of
         times when a database description packet was received with a sequence
         number mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 5 }

tmnxOspfNgNbrBadMTUs             OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBadMTUs indicates the total number of times
         when the MTU in a received database description packet was larger than
         the MTU of the receiving interface since tmnxOspfAdminState was last
         set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 6 }

tmnxOspfNgNbrBadPackets          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrBadPackets indicates the total number of
         times when an LS update was received with an illegal LS type or an
         option mismatch since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 7 }

tmnxOspfNgNbrLsaNotInLsdbs       OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrLsaNotInLsdbs indicates the total number of
         times when an LS request was received for an LSA not installed in the
         LSDB of this router since tmnxOspfAdminState was last set to
         'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 8 }

tmnxOspfNgNbrOptionMismatches    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrOptionMismatches indicates the total number
         of times when a LS update was received with an option mismatch since
         tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 9 }

tmnxOspfNgNbrDuplicates          OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrDuplicates indicates the total number of
         times when a duplicate database description packet was received during
         the Exchange state since tmnxOspfAdminState was last set to 'enabled'."
    ::= { tmnxOspfNgNbrStatsEntry 10 }

tmnxOspfNgNbrNumRestarts         OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgNbrNumRestarts indicates the number of times
         the neighbor has attempted restart."
    ::= { tmnxOspfNgNbrStatsEntry 11 }

tmnxOspfNgIfMD5KeyTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfNgIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfNgIfMD5KeyTable contains a list of MD5 keys to be used to
         authenticate OSPFv2 packets."
    ::= { tmnxOspfObjects 36 }

tmnxOspfNgIfMD5KeyEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfNgIfMD5KeyEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry represents a MD5 key to be used to authenticate a
         OSPFv2 packet addressed to a particular OSPF IP address. Entries can
         be created and deleted via SNMP SET operations. Creation requires a
         SET request containing at least tmnxOspfNgIfMD5KeyKey and
         tmnxOspfNgIfMD5KeyStatus."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNgIfIndex,
        tmnxOspfNgIfInstId,
        tmnxOspfNgIfAreaId,
        tmnxOspfNgIfMD5KeyIndex
    }
    ::= { tmnxOspfNgIfMD5KeyTable 1 }

TmnxOspfNgIfMD5KeyEntry          ::= SEQUENCE
{
    tmnxOspfNgIfMD5KeyIndex          TmnxOspfIfMD5KeyId,
    tmnxOspfNgIfMD5KeyStatus         RowStatus,
    tmnxOspfNgIfMD5KeyKey            OCTET STRING,
    tmnxOspfNgIfMD5KeyStartTime      DateAndTime,
    tmnxOspfNgIfMD5KeyStopTime       DateAndTime
}

tmnxOspfNgIfMD5KeyIndex          OBJECT-TYPE
    SYNTAX      TmnxOspfIfMD5KeyId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5KeyIndex provides a unique identifier for
         a key to be used for authentication on a specific OSPFv2 IP address.

         If tmnxOspfNgIfMD5KeyIndex has a value of 0, it means that no keys are
         configured."
    ::= { tmnxOspfNgIfMD5KeyEntry 1 }

tmnxOspfNgIfMD5KeyStatus         OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The object tmnxOspfNgIfMD5KeyStatus is the RowStatus used for
         creation, deletion, or control of tmnxOspfNgIfMD5KeyTable entries.
         Before the row can be placed into the 'active' state,
         tmnxOspfNgIfMD5KeyKey must have been assigned a value."
    ::= { tmnxOspfNgIfMD5KeyEntry 2 }

tmnxOspfNgIfMD5KeyKey            OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5KeyKey specifies the MD5 authentication
         key to be used on this OSPFv2 IP address.

         When read, tmnxOspfNgIfMD5KeyKey always returns an OCTET STRING of
         length zero."
    ::= { tmnxOspfNgIfMD5KeyEntry 3 }

tmnxOspfNgIfMD5KeyStartTime      OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5KeyStartTime specifies the date and time
         when this MD5 authentication key becomes valid for use. If no date and
         time is set, represented by a DateAndTime string with 0 length, the
         key is valid by default.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfNgIfMD5KeyEntry 4 }

tmnxOspfNgIfMD5KeyStopTime       OBJECT-TYPE
    SYNTAX      DateAndTime
    MAX-ACCESS  read-create
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfNgIfMD5KeyStopTime specifies the date and time
         when this MD5 authentication key becomes invalid for use. If no date
         and time is set, represented by a DateAndTime string with 0 length,
         the key is valid indefinitely.

         This object was made obsolete in release 13.0."
    DEFVAL      { '0000000000000000000000'H }
    ::= { tmnxOspfNgIfMD5KeyEntry 5 }

tmnxOspfLfaStatsTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfLfaStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfLfaStatsTable maintains information on loopfree-alternate
         (LFA) coverage for each instance of OSPF protocol."
    ::= { tmnxOspfObjects 37 }

tmnxOspfLfaStatsEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfLfaStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfLfaStatsTable represents information on
         LFA coverage for a given OSPF area"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaId
    }
    ::= { tmnxOspfLfaStatsTable 1 }

TmnxOspfLfaStatsEntry            ::= SEQUENCE
{
    tmnxOspfLfaNodesCovered          Gauge32,
    tmnxOspfLfaTotalNodes            Gauge32,
    tmnxOspfLfaCoverage              Gauge32,
    tmnxOspfLfaPfxCovered            Gauge32,
    tmnxOspfLfaTotalPfx              Gauge32,
    tmnxOspfLfaPfxCoverage           Gauge32
}

tmnxOspfLfaNodesCovered          OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaNodesCovered indicates in absolute numbers the
         number of nodes for which an LFA is found."
    ::= { tmnxOspfLfaStatsEntry 1 }

tmnxOspfLfaTotalNodes            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaTotalNodes indicates in absolute numbers the
         number of nodes eligible for LFA calculation."
    ::= { tmnxOspfLfaStatsEntry 2 }

tmnxOspfLfaCoverage              OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaCoverage indicates how much LFA coverage
         is being obtained for the set of  available LFA eligible nodes."
    ::= { tmnxOspfLfaStatsEntry 3 }

tmnxOspfLfaPfxCovered            OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaPfxCovered indicates in absolute numbers the
         number of prefixes for which an LFA is found."
    ::= { tmnxOspfLfaStatsEntry 4 }

tmnxOspfLfaTotalPfx              OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaTotalPfx indicates in absolute numbers the
         number of prefixes eligible for LFA calculation."
    ::= { tmnxOspfLfaStatsEntry 5 }

tmnxOspfLfaPfxCoverage           OBJECT-TYPE
    SYNTAX      Gauge32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLfaPfxCoverage indicates how much LFA prefix
         coverage is being obtained for the set of  available LFA eligible
         prefixes."
    ::= { tmnxOspfLfaStatsEntry 6 }

tmnxOspfPathTable                OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfPathEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfPathTable maintains information regarding LFA calculations
         for each instance of OSPF protocol."
    ::= { tmnxOspfObjects 38 }

tmnxOspfPathEntry                OBJECT-TYPE
    SYNTAX      TmnxOspfPathEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfPathTable"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaId,
        tmnxOspfPathDestRouterId,
        tmnxOspfPathIfIndex,
        tmnxOspfPathNhopRouterId
    }
    ::= { tmnxOspfPathTable 1 }

TmnxOspfPathEntry                ::= SEQUENCE
{
    tmnxOspfPathDestRouterId         TmnxOspfRouterIdTc,
    tmnxOspfPathIfIndex              InterfaceIndex,
    tmnxOspfPathNhopRouterId         TmnxOspfRouterIdTc,
    tmnxOspfPathMetric               Unsigned32,
    tmnxOspfPathLfaIfIndex           InterfaceIndexOrZero,
    tmnxOspfPathLfaType              INTEGER,
    tmnxOspfPathLfaNhopRouterId      TmnxOspfRouterIdTc,
    tmnxOspfPathLfaMetric            Unsigned32,
    tmnxOspfPathNhOwner              TmnxInetCidrNextHopOwner,
    tmnxOspfPathLfaNhOwner           TmnxInetCidrNextHopOwner
}

tmnxOspfPathDestRouterId         OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathDestRouterId indicates the destination node
         associated with this entry."
    ::= { tmnxOspfPathEntry 1 }

tmnxOspfPathIfIndex              OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathIfIndex indicates the ifIndex of the outgoing
         interface for the route."
    ::= { tmnxOspfPathEntry 2 }

tmnxOspfPathNhopRouterId         OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathNhopRouterId indicates the next hop through
         which this route is reachable."
    ::= { tmnxOspfPathEntry 3 }

tmnxOspfPathMetric               OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathMetric indicates the metric assigned to this
         entry after SPF calculations. The lower the metric value, the shorter
         is the path and hence more preferred by the protocol."
    ::= { tmnxOspfPathEntry 4 }

tmnxOspfPathLfaIfIndex           OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathLfaIfIndex indicates the loopfree-alternate
         ifIndex of the outgoing interface for the LFA path."
    ::= { tmnxOspfPathEntry 5 }

tmnxOspfPathLfaType              OBJECT-TYPE
    SYNTAX      INTEGER {
        noProtection   (0),
        nodeProtection (1),
        linkProtection (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathLfaType indicates the level of LFA protection
         represented by this row entry."
    ::= { tmnxOspfPathEntry 6 }

tmnxOspfPathLfaNhopRouterId      OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathLfaNhopRouterId indicates the next-hop node
         in this loopfree-alternate path to reach a given destination node. The
         value of tmnxOspfPathLfaNhopRouterId is valid only if
         tmnxOspfPathLfaType has a non-zero value."
    ::= { tmnxOspfPathEntry 7 }

tmnxOspfPathLfaMetric            OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathLfaMetric indicates the metric assigned to
         this entry after LFA calculations. The lower the metric value, the
         shorter is the path and hence more preferred by the protocol. The
         value of tmnxOspfPathLfaMetric is valid only if tmnxOspfPathLfaType
         has a non-zero value."
    ::= { tmnxOspfPathEntry 8 }

tmnxOspfPathNhOwner              OBJECT-TYPE
    SYNTAX      TmnxInetCidrNextHopOwner
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathNhOwner indicates the owner of next hop for
         this route."
    ::= { tmnxOspfPathEntry 9 }

tmnxOspfPathLfaNhOwner           OBJECT-TYPE
    SYNTAX      TmnxInetCidrNextHopOwner
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPathLfaNhOwner indicates the owner of next hop
         for this loopfree-alternate route."
    ::= { tmnxOspfPathEntry 10 }

tmnxOspfGeneralExTable           OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfGeneralExEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfGeneralExTable provides an extension of the
         tmnxOspfGeneralTable."
    ::= { tmnxOspfObjects 39 }

tmnxOspfGeneralExEntry           OBJECT-TYPE
    SYNTAX      TmnxOspfGeneralExEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfGeneralExTable represents additional
         columns for an OSPF instance."
    AUGMENTS    { tmnxOspfGeneralEntry }
    ::= { tmnxOspfGeneralExTable 1 }

TmnxOspfGeneralExEntry           ::= SEQUENCE
{
    tmnxOspfGeneralExLastChanged     TimeStamp,
    tmnxOspfAdvRtrCapability         INTEGER,
    tmnxOspfLFAExcludePolicy1        TNamedItemOrEmpty,
    tmnxOspfLFAExcludePolicy2        TNamedItemOrEmpty,
    tmnxOspfLFAExcludePolicy3        TNamedItemOrEmpty,
    tmnxOspfLFAExcludePolicy4        TNamedItemOrEmpty,
    tmnxOspfLFAExcludePolicy5        TNamedItemOrEmpty,
    tmnxOspfRibPriorityListHigh      TNamedItemOrEmpty,
    tmnxOspfPrefixSidRangeType       INTEGER,
    tmnxOspfPrefixSidRangeStartLabel Unsigned32,
    tmnxOspfPrefixSidRangeMaxIdx     Unsigned32,
    tmnxOspfSrAdminState             TmnxAdminState,
    tmnxOspfTunnelTablePreference    Unsigned32,
    tmnxOspfRemoteLFA                TruthValue,
    tmnxOspfMaxPqCost                Unsigned32,
    tmnxOspfTunnelMtu                Unsigned32,
    tmnxOspfAdvRtrLsaLimit           Unsigned32,
    tmnxOspfAdvRtrLsaLimitTimeout    Unsigned32,
    tmnxOspfAdvRtrLsaLimitWarning    Unsigned32,
    tmnxOspfAdvRtrLsaLimitLogOnly    TruthValue,
    tmnxOspfSrAdjSidHold             Unsigned32,
    tmnxOspfDatabaseExport           TmnxEnabledDisabled,
    tmnxOspfDbExportIdentifierSet    TruthValue,
    tmnxOspfDbExportIdentifierLow    Unsigned32,
    tmnxOspfDbExportIdentifierHigh   Unsigned32,
    tmnxOspfBgpLsIdentifierSet       TruthValue,
    tmnxOspfBgpLsIdentifier          Unsigned32,
    tmnxOspfBackupNodeSidPfxType     TmnxAddressAndPrefixType,
    tmnxOspfBackupNodeSidPfx         TmnxAddressAndPrefixAddress,
    tmnxOspfBackupNodeSidPfxLen      TmnxAddressAndPrefixPrefix,
    tmnxOspfBackupNodeSidType        INTEGER,
    tmnxOspfBackupNodeSidValue       Unsigned32,
    tmnxOspfExtendedLsa              INTEGER,
    tmnxOspfSrEntropyLabel           INTEGER,
    tmnxOspfTiLfa                    TruthValue,
    tmnxOspfMaxSrFrrLabels           Unsigned32,
    tmnxOspfOverrideTunnelElc        INTEGER,
    tmnxOspfSrMsAdminState           TmnxAdminState,
    tmnxOspfSrExportTunnelTableProt  INTEGER,
    tmnxOspfSrlbReservedLblBlockName TLNamedItemOrEmpty,
    tmnxOspfRemoteLfaNodeProtect     TruthValue,
    tmnxOspfRemoteLfaMaxPqNodes      Unsigned32,
    tmnxOspfTiLfaNodeProtect         TruthValue,
    tmnxOspfMultiInstance            INTEGER,
    tmnxOspfReferenceBandwidthU64Hi  TmnxHigh32,
    tmnxOspfReferenceBandwidthU64Lo  TmnxLow32,
    tmnxOspfEgressStatsNodeSid       TruthValue,
    tmnxOspfEgressStatsAdjSid        TruthValue,
    tmnxOspfEgressStatsAdjSet        TruthValue,
    tmnxOspfIngressStatsNodeSid      TruthValue,
    tmnxOspfIngressStatsAdjSid       TruthValue,
    tmnxOspfIngressStatsAdjSet       TruthValue,
    tmnxOspfOverloadInclExt1         TruthValue
}

tmnxOspfGeneralExLastChanged     OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfGeneralExLastChanged indicates the sysUpTime when
         a configurable object in this row was last modified."
    ::= { tmnxOspfGeneralExEntry 1 }

tmnxOspfAdvRtrCapability         OBJECT-TYPE
    SYNTAX      INTEGER {
        disable (0),
        link    (1),
        area    (2),
        as      (3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvRtrCapability specifies the OSPF advertise
         router capabilities."
    DEFVAL      { disable }
    ::= { tmnxOspfGeneralExEntry 2 }

tmnxOspfLFAExcludePolicy1        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLFAExcludePolicy1 is the name of the first policy
         from which prefixes are excluded which match on the OSPF tag. Prefixes
         excluded from LFA (Loopfree Alternative) this way will not be used in
         the LFA calculation, regardless of its priority."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 3 }

tmnxOspfLFAExcludePolicy2        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLFAExcludePolicy2 is the name of the second
         policy from which prefixes are excluded which match on the OSPF tag.
         Prefixes excluded from LFA (Loopfree Alternative) this way will not be
         used in the LFA calculation, regardless of its priority."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 4 }

tmnxOspfLFAExcludePolicy3        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLFAExcludePolicy3 is the name of the third policy
         from which prefixes are excluded which match on the OSPF tag. Prefixes
         excluded from LFA (Loopfree Alternative) this way will not be used in
         the LFA calculation, regardless of its priority."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 5 }

tmnxOspfLFAExcludePolicy4        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLFAExcludePolicy4 is the name of the fourth
         policy from which prefixes are excluded which match on the OSPF tag.
         Prefixes excluded from LFA (Loopfree Alternative) this way will not be
         used in the LFA calculation, regardless of its priority."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 6 }

tmnxOspfLFAExcludePolicy5        OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfLFAExcludePolicy5 is the name of the fifth policy
         from which prefixes are excluded which match on the OSPF tag. Prefixes
         excluded from LFA (Loopfree Alternative) this way will not be used in
         the LFA calculation, regardless of its priority."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 7 }

tmnxOspfRibPriorityListHigh      OBJECT-TYPE
    SYNTAX      TNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfRibPriorityListHigh is the name of the prefix
         list which contains prefixes that get high priority for RIB-download.
         The high priority ones are downloaded first to the RIB. In doing so,
         the convergence time for these prefixes is better."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 8 }

tmnxOspfPrefixSidRangeType       OBJECT-TYPE
    SYNTAX      INTEGER {
        none   (0),
        global (1),
        local  (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPrefixSidRangeType specifies whether global
         or  operation mode is selected. If local mode is used,
         tmnxOspfPrefixSidRangeStartLabel and tmnxOspfPrefixSidRangeMaxIdx
         describe the range. If global mode is selected those fields are
         not used. "
    DEFVAL      { none }
    ::= { tmnxOspfGeneralExEntry 9 }

tmnxOspfPrefixSidRangeStartLabel OBJECT-TYPE
    SYNTAX      Unsigned32 (0..524287)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPrefixSidRangeStartLabel specifies the local
         label starting offset value."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 10 }

tmnxOspfPrefixSidRangeMaxIdx     OBJECT-TYPE
    SYNTAX      Unsigned32 (0..524287)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfPrefixSidRangeMaxIdx specifies the maximum local
         SID index that can be used."
    DEFVAL      { 1 }
    ::= { tmnxOspfGeneralExEntry 11 }

tmnxOspfSrAdminState             OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrAdminState specifies the desired
         administrative state of Segment Routing for this OSPF instance."
    DEFVAL      { outOfService }
    ::= { tmnxOspfGeneralExEntry 12 }

tmnxOspfTunnelTablePreference    OBJECT-TYPE
    SYNTAX      Unsigned32 (1..255)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfTunnelTablePreference specifies the preference
         value for TTM tunnels in this OSPF instance."
    DEFVAL      { 10 }
    ::= { tmnxOspfGeneralExEntry 13 }

tmnxOspfRemoteLFA                OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfRemoteLFA specifies whether remote-LFA
         is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 14 }

tmnxOspfMaxPqCost                OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMaxPqCost specifies the maximum cost of a
         destination node during reverse SPF calculation."
    DEFVAL      { 65535 }
    ::= { tmnxOspfGeneralExEntry 15 }

tmnxOspfTunnelMtu                OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 512..9786)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfTunnelMtu specifies the tunnel MTU size used for
         segment routing.

         A value of 0 results in using the MTU of the nexthop, a value in the
         range of 512..9198 will override this."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 16 }

tmnxOspfAdvRtrLsaLimit           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvRtrLsaLimit specifies the maximum number of
         LSAs we allow to be advertised by one router. If the number of LSAs
         from one router exceeds this number, further LSAs are ignored and OSPF
         goes into overload. A value of 0 indicates no limit."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 17 }

tmnxOspfAdvRtrLsaLimitTimeout    OBJECT-TYPE
    SYNTAX      Unsigned32 (0 | 1..1800)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvRtrLsaLimitTimeout specifies the maximum
         timeout in seconds we go into overload when tmnxOspfAdvRtrLsaLimit is
         reached. A value of 0 indicates indefinite."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 18 }

tmnxOspfAdvRtrLsaLimitWarning    OBJECT-TYPE
    SYNTAX      Unsigned32 (0..100)
    UNITS       "percent"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdvRtrLsaLimitWarning specifies the percentage of
         the tmnxOspfAdvRtrLsaLimit, at which a warning log message and SNMP
         notification would be sent. This would only be a warning and
         additional routes will be learned up to 100% of
         tmnxOspfAdvRtrLsaLimit.

         A value of 0 indicates that tmnxOspfAdvRtrLsaLimitWarning is disabled
         and no log message or SNMP notification would be sent."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 19 }

tmnxOspfAdvRtrLsaLimitLogOnly    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdvRtrLsaLimitLogOnly specifies
         whether OSPF should go into overload when tmnxOspfAdvRtrLsaLimit is
         reached. Value false indicates overload should be triggered, true
         indicates only a trap needs to be sent."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 20 }

tmnxOspfSrAdjSidHold             OBJECT-TYPE
    SYNTAX      Unsigned32 (0..300)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrAdjSidHold specifies the adjacency
         SID hold time in seconds."
    DEFVAL      { 15 }
    ::= { tmnxOspfGeneralExEntry 21 }

tmnxOspfDatabaseExport           OBJECT-TYPE
    SYNTAX      TmnxEnabledDisabled
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfDatabaseExport specifies whether
         database export has been enabled or disabled for this OSPF instance.

         When the value of tmnxOspfDatabaseExport is 'enabled', OSPF will
         redistribute LSDB via segment routing TE-DB into NLRI format."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralExEntry 22 }

tmnxOspfDbExportIdentifierSet    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfDbExportIdentifierSet specifies
         whether to use the values of tmnxOspfDbExportIdentifierLow and
         tmnxOspfDbExportIdentifierHigh or not.

         When set to true(1), the values of tmnxOspfDbExportIdentifierLow and
         tmnxOspfDbExportIdentifierHigh are used to uniquely identify the IGP
         instance in the BGP-LS NLRI.

         When set to false, the identifier in the BGP-LS NLRI defaults to the
         IGP instance number assigned by SROS."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 23 }

tmnxOspfDbExportIdentifierLow    OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfDbExportIdentifierLow specifies the
         lower 32 bits of the unique identifier of the IGP instance in the
         BGP-LS NLRI.

         The value of this object is ignored when the object
         tmnxOspfDbExportIdentifierSet is false."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 24 }

tmnxOspfDbExportIdentifierHigh   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfDbExportIdentifierHigh specifies the
         upper 32 bits of the unique identifier of the IGP instance in the
         BGP-LS NLRI.

         The value of this object is ignored when the object
         tmnxOspfDbExportIdentifierSet is false."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 25 }

tmnxOspfBgpLsIdentifierSet       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfBgpLsIdentifierSet specifies whether
         to use the value of tmnxOspfBgpLsIdentifier or not.

         When set to true(1), the value of tmnxOspfBgpLsIdentifier is used to
         identify the BGP-LS in the BGP-LS NLRI.

         When set to false, no BGP-LS identifier is sent in the BGP-LS NLRI."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 26 }

tmnxOspfBgpLsIdentifier          OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfBgpLsIdentifier specifies the BGP-LS
         identifier that is sent in the BGP-LS NLRI.

         The BGP-LS identifier is used along with the ASN to correlate the
         BGP-LS NLRI advertisements of multiple BGP-LS speakers of the same IGP
         domain.

         The value of this object is ignored when the object
         tmnxOspfBgpLsIdentifierSet is false."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 27 }

tmnxOspfBackupNodeSidPfxType     OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfBackupNodeSidPfxType specifies the IP
         address type for tmnxOspfBackupNodeSidPfx."
    DEFVAL      { unknown }
    ::= { tmnxOspfGeneralExEntry 28 }

tmnxOspfBackupNodeSidPfx         OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixAddress (SIZE (0|4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBackupNodeSidPfx specifies the IP Address of the
         prefix."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 29 }

tmnxOspfBackupNodeSidPfxLen      OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixPrefix
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBackupNodeSidPfxLen specifies the number of
         leading one bits that form the mask to be logical-ANDed with
         tmnxOspfBackupNodeSidPfx."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 30 }

tmnxOspfBackupNodeSidType        OBJECT-TYPE
    SYNTAX      INTEGER {
        none  (0),
        index (1),
        label (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBackupNodeSidType specifies whether the object
         tmnxOspfBackupNodeSidValue is not valid, an index value or an absolute
         label value."
    DEFVAL      { none }
    ::= { tmnxOspfGeneralExEntry 31 }

tmnxOspfBackupNodeSidValue       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfBackupNodeSidValue together with
         tmnxOspfNgIfSidType specifies the SID value or index for this backup
         node SID."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 32 }

tmnxOspfExtendedLsa              OBJECT-TYPE
    SYNTAX      INTEGER {
        sparse (0),
        only   (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfExtendedLsa specifies the whether or not to use
         extended LSAs for this OSPFv3 instance."
    DEFVAL      { sparse }
    ::= { tmnxOspfGeneralExEntry 33 }

tmnxOspfSrEntropyLabel           OBJECT-TYPE
    SYNTAX      INTEGER {
        enable       (1),
        forceDisable (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrEntropyLabel specifies whether
         processing of received entropy label capability (ELC) advertisements
         is enabled or not for this OSPF instance.

         When the value is set to 'enable', the system will process any
         received ELC in sub-TLV in OSPF.

         When the value is set to 'force-disable', the system is forced to
         ignore any received ELC in OSPF. It also prevents a user to configure
         override-tunnel ELC; i.e. the object tmnxOspfOverrideTunnelElc is
         ignored."
    DEFVAL      { enable }
    ::= { tmnxOspfGeneralExEntry 34 }

tmnxOspfTiLfa                    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfTiLfa specifies whether Topology Independent LFA
         is enabled or not.

         The value of tmnxOspfTiLfa is only valid when the object
         tmnxOspfLoopfreeAlternate has the value 'true'."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 35 }

tmnxOspfMaxSrFrrLabels           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..3)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfMaxSrFrrLabels specifies the maximum number of
         Segment Routing Fast-Reroute labels.

         The value of tmnxOspfMaxSrFrrLabels is only valid when the objects
         tmnxOspfLoopfreeAlternate and tmnxOspfTiLfa both have the value
         'true'."
    DEFVAL      { 2 }
    ::= { tmnxOspfGeneralExEntry 36 }

tmnxOspfOverrideTunnelElc        OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        disabled (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfOverrideTunnelElc specifies whether
         received entropy label capability (ELC) advertisement is overridden or
         not for this OSPF instance.

         When the value is set to 'enabled', the system will assume that all
         OSPF nodes are capable of receiving and processing the entropy label
         on segment routed tunnels.

         When the value is set to 'disabled', the override is disabled;  the
         system will only assume entropy label capability for other OSPF nodes
         if capability advertisements are received.

         This override value is only applicable when tmnxOspfSrEntropyLabel is
         enabled."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralExEntry 37 }

tmnxOspfSrMsAdminState           OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrMsAdminState specifies the desired
         administrative state of Segment Routing Mapping Server for this OSPF
         instance."
    DEFVAL      { outOfService }
    ::= { tmnxOspfGeneralExEntry 38 }

tmnxOspfSrExportTunnelTableProt  OBJECT-TYPE
    SYNTAX      INTEGER {
        none (0),
        ldp  (1)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrExportTunnelTableProt specifies the
         protocol Segment Routing is stitched to.

         If the value of tmnxOspfSrExportTunnelTableProt is none (0), OSPF will
         not export tunnels from the Tunnel Table Manager (TTM).

         If the value of tmnxOspfSrExportTunnelTableProt is ldp (1), OSPF will
         export LDP tunnels from TTM to the Segment Routing (SR)."
    DEFVAL      { none }
    ::= { tmnxOspfGeneralExEntry 39 }

tmnxOspfSrlbReservedLblBlockName OBJECT-TYPE
    SYNTAX      TLNamedItemOrEmpty
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrlbReservedLblBlockName specifies the
         name identifying the reserved label block (SRLB) to be used on this
         OSPF instance.

         The SR Local Block (SRLB) Sub-TLV contains the range of labels the
         node has reserved for local SIDs.

         When no reserved label block name is specified, no static labels can
         be allocated.

         The reserved label block name is defined by vRtrMplsReservedLblBlkName
         and is the index for TIMETRA-MPLS-MIB::vRtrMplsReservedLblBlkTable."
    DEFVAL      { ''H }
    ::= { tmnxOspfGeneralExEntry 40 }

tmnxOspfRemoteLfaNodeProtect     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfRemoteLfaNodeProtect specifies whether
         Node protection with Remote LFA is enabled or not.

         The value of tmnxOspfRemoteLfaNodeProtect is only valid when the
         objects tmnxOspfLoopfreeAlternate and tmnxOspfRemoteLFA both have the
         value 'true'."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 41 }

tmnxOspfRemoteLfaMaxPqNodes      OBJECT-TYPE
    SYNTAX      Unsigned32 (1..32)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfRemoteLfaMaxPqNodes specifies the
         maximum number of PQ nodes for which we perform the forward SPF check
         to see if its path to the destination does not go via the node which
         we are protecting against.

         The value of tmnxOspfRemoteLfaMaxPqNodes is only valid when the
         objects tmnxOspfLoopfreeAlternate and tmnxOspfRemoteLFA both have the
         value 'true'."
    DEFVAL      { 16 }
    ::= { tmnxOspfGeneralExEntry 42 }

tmnxOspfTiLfaNodeProtect         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfTiLfaNodeProtect specifies whether
         Node protection with Topology Independent LFA is enabled or not.

         The value of tmnxOspfTiLfaNodeProtect is only valid when the objects
         tmnxOspfLoopfreeAlternate and tmnxOspfTiLfa both have the value
         'true'."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 43 }

tmnxOspfMultiInstance            OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled  (1),
        disabled (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfMultiInstance specifies whether OSPFv2
         Multi Instance Extensions are enabled or not for this instance.

         The value of tmnxOspfMultiInstance can only be changed for OSPFv2
         instances."
    DEFVAL      { disabled }
    ::= { tmnxOspfGeneralExEntry 44 }

tmnxOspfReferenceBandwidthU64Hi  OBJECT-TYPE
    SYNTAX      TmnxHigh32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfReferenceBandwidthU64Hi specifies the
         upper 32 bit of the reference bandwidth that needs to be used to
         calculate the cost metric.

         This value should always be set along with
         tmnxOspfReferenceBandwidthU64Lo, otherwise an 'inconsistentValue'
         error is returned.

         The cost metric is calculated by dividing the value of  the reference
         bandwidth by the bandwidth of the interface."
    DEFVAL      { 0 }
    ::= { tmnxOspfGeneralExEntry 45 }

tmnxOspfReferenceBandwidthU64Lo  OBJECT-TYPE
    SYNTAX      TmnxLow32
    UNITS       "kilobps"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfReferenceBandwidthU64Lo specifies the
         lower 32 bit of the reference bandwidth that needs to be used to
         calculate the cost metric.

         This value should always be set along with
         tmnxOspfReferenceBandwidthU64Hi, otherwise an 'inconsistentValue'
         error is returned.

         The cost metric is calculated by dividing the value of  the reference
         bandwidth by the bandwidth of the interface.

         The default value of 100,000,000 Kbps or 100 Gps provides a
         10-Mbs link with a cost of 10000, a 100-Mbs link with a cost of
         1000, a 1-Gbs link with a cost of 100 and
         10-Gbs link with a cost of 10.  To override this default cost
         on a particular interface, set tmnxOspfIfCfgMetric for that
         interface."
    DEFVAL      { 100000000 }
    ::= { tmnxOspfGeneralExEntry 46 }

tmnxOspfEgressStatsNodeSid       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfEgressStatsNodeSid specifies whether egress
         statistic collection on Node SIDs is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 47 }

tmnxOspfEgressStatsAdjSid        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfEgressStatsAdjSid specifies whether egress
         statistic collection on Adjacency SIDs is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 48 }

tmnxOspfEgressStatsAdjSet        OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfEgressStatsAdjSet specifies whether egress
         statistic collection on Adjacency sets is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 49 }

tmnxOspfIngressStatsNodeSid      OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIngressStatsNodeSid specifies whether egress
         statistic collection on Node SIDs is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 50 }

tmnxOspfIngressStatsAdjSid       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIngressStatsAdjSid specifies whether egress
         statistic collection on Adjacency SIDs is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 51 }

tmnxOspfIngressStatsAdjSet       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIngressStatsAdjSet specifies whether egress
         statistic collection on Adjacency sets is enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 52 }

tmnxOspfOverloadInclExt1         OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfOverloadInclExt1 specifies if the OSPF external
         prefixes with metric-type 1, should be advertised with a maximum
         metric value when the system goes into overload state for any reason.
         If the value is 'true', the system uses the maximum metric value."
    DEFVAL      { false }
    ::= { tmnxOspfGeneralExEntry 53 }

tmnxOspfSrPfxTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfSrPfxEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfSrPfxTable contains prefixes which are mapped to segment
         identifiers."
    ::= { tmnxOspfObjects 40 }

tmnxOspfSrPfxEntry               OBJECT-TYPE
    SYNTAX      TmnxOspfSrPfxEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The TmnxOspfSrPfxEntry defines how a prefix is mapped to a segment
         identifier within a certain OSPF instance"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfSrPfxType,
        tmnxOspfSrPfx,
        tmnxOspfSrPfxLen,
        tmnxOspfSrPfxAreaId,
        tmnxOspfSrPfxSidRtType,
        tmnxOspfSrPfxSid,
        tmnxOspfSrPfxAdvtRtrId
    }
    ::= { tmnxOspfSrPfxTable 1 }

TmnxOspfSrPfxEntry               ::= SEQUENCE
{
    tmnxOspfSrPfxType                InetAddressType,
    tmnxOspfSrPfx                    InetAddress,
    tmnxOspfSrPfxLen                 InetAddressPrefixLength,
    tmnxOspfSrPfxAreaId              TmnxOspfAreaIdTc,
    tmnxOspfSrPfxSidRtType           TmnxOspfSegmentRoutingRouteType,
    tmnxOspfSrPfxSid                 TmnxSegmentRoutingId,
    tmnxOspfSrPfxAdvtRtrId           TmnxOspfRouterIdTc,
    tmnxOspfSrPfxSidFlags            BITS,
    tmnxOspfSrPfxSidActive           TruthValue,
    tmnxOspfSrPfxSidSRMS             TruthValue,
    tmnxOspfSrPfxSidSRMSSelected     TruthValue
}

tmnxOspfSrPfxType                OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrPfxType specifies the IP address
         type for tmnxOspfSrPfx."
    ::= { tmnxOspfSrPfxEntry 1 }

tmnxOspfSrPfx                    OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (4|16))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrPfx specifies the IP Address of the
         prefix.  This MUST be a Global address."
    ::= { tmnxOspfSrPfxEntry 2 }

tmnxOspfSrPfxLen                 OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Indicates the number of leading one bits that form the mask to be
         logical-ANDed with tmnxOspfSrPfx."
    ::= { tmnxOspfSrPfxEntry 3 }

tmnxOspfSrPfxAreaId              OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrPfxAreaId specifies the area in which this
         segment routing sid is defined."
    ::= { tmnxOspfSrPfxEntry 4 }

tmnxOspfSrPfxSidRtType           OBJECT-TYPE
    SYNTAX      TmnxOspfSegmentRoutingRouteType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrPfxSidRtType specifies the OSPF segment routing
         SID route type."
    ::= { tmnxOspfSrPfxEntry 5 }

tmnxOspfSrPfxSid                 OBJECT-TYPE
    SYNTAX      TmnxSegmentRoutingId
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrPfxSid specifies a 32-bit integer uniquely
         identifying a Segment Routing Identifier."
    ::= { tmnxOspfSrPfxEntry 6 }

tmnxOspfSrPfxAdvtRtrId           OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrPfxAdvtRtrId specifies a 32-bit integer
         uniquely  the router in the Autonomous System which advertised this
         prefix SID."
    ::= { tmnxOspfSrPfxEntry 7 }

tmnxOspfSrPfxSidFlags            OBJECT-TYPE
    SYNTAX      BITS {
        bitN  (0),
        bitP  (1),
        bitM  (2),
        bitE  (3),
        bitV  (4),
        bitL  (5),
        bitIA (6),
        bitAT (7),
        bitB  (8)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrPfxSidFlags indicates the flags of a
         Prefix-SID advertised extended prefix TLV.

         bitN   (0)  - Node-SID flag. The N-Flag is set on Prefix-SIDs
           attached to a router loopback address.
         bitP   (1)  - no-PHP flag. If set, then the penultimate hop MUST NOT
           pop the Prefix-SID before delivering the packet to the node
           that advertised the Prefix-SID.
         bitM   (2)  - Mapping Server flag. If set, the SID is advertised
           from the Segment Routing Mapping Server functionality
         bitE   (3)  - Explicit-Null Flag.  If set, any upstream neighbor
           of the Prefix-SID originator MUST replace the Prefix-SID with
           a Prefix-SID having an Explicit-NULL value (0 for IPv4) before
           forwarding the packet.
         bitV   (4)  - Value flag. If set, then the Prefix-SID carries a
           value (instead of an index).
         bitL   (5)  - Local Flag.  If set, then the value/index carried by
           the Prefix-SID has local significance.
         bitIA  (6)  - Inter Area flag.
         bitAT  (7)  - Attached flag.
         bitB   (8)  - Backup SID (Seamless MPLS)"
    ::= { tmnxOspfSrPfxEntry 8 }

tmnxOspfSrPfxSidActive           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "The value of tmnxOspfSrPfxSidActive indicates whether this entry is
         the preferred lsa-entry for given prefix-sid.

         This object is obsoleted in release 16.0."
    ::= { tmnxOspfSrPfxEntry 9 }

tmnxOspfSrPfxSidSRMS             OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrPfxSidSRMS indicates whether or not
         the Prefix/SID is advertised by a Segment Routing Mapping Server."
    ::= { tmnxOspfSrPfxEntry 10 }

tmnxOspfSrPfxSidSRMSSelected     OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrPfxSidSRMSSelected indicates whether
         or not the prefix SID received in the Prefix Range TLV is selected to
         be programmed.

         When there is however a SID for the same prefix received in a Prefix
         TLV, that prefix SID will be programmed and not the SRMS prefix SID.

         The object tmnxOspfSrPfxSidSRMSSelected is only applicable for SRMS
         prefix SID; tmnxOspfSrPfxSidSRMSSelected will return false in case the
         value of tmnxOspfSrPfxSidSRMS is false."
    ::= { tmnxOspfSrPfxEntry 11 }

tmnxOspfSrLfaStatsTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfSrLfaStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfSrLfaStatsTable maintains information on Segment Routing
         (SR) loopfree-alternate (LFA) coverage for each instance of OSPF
         protocol."
    ::= { tmnxOspfObjects 41 }

tmnxOspfSrLfaStatsEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfSrLfaStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfSrLfaStatsTable represents information
         on SR LFA coverage for a given OSPF area"
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAreaId,
        tmnxOspfSrLfaStatsSidType
    }
    ::= { tmnxOspfSrLfaStatsTable 1 }

TmnxOspfSrLfaStatsEntry          ::= SEQUENCE
{
    tmnxOspfSrLfaStatsSidType        INTEGER,
    tmnxOspfSrLfaStatsTotalSid       Gauge32,
    tmnxOspfSrLfaStatsLfaCovered     Gauge32,
    tmnxOspfSrLfaStatsRLfaCovered    Gauge32,
    tmnxOspfSrLfaStatsTiLfaCovered   Gauge32
}

tmnxOspfSrLfaStatsSidType        OBJECT-TYPE
    SYNTAX      INTEGER {
        nodeSid    (0),
        adjSid     (1),
        globAdjSid (2)
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrLfaStatsSidType specifies the SID
         type for which SR LFA coverage has been computed."
    ::= { tmnxOspfSrLfaStatsEntry 1 }

tmnxOspfSrLfaStatsTotalSid       OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrLfaStatsTotalSid indicates the
         number of SIDs eligible for SR LFA calculation"
    ::= { tmnxOspfSrLfaStatsEntry 2 }

tmnxOspfSrLfaStatsLfaCovered     OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrLfaStatsLfaCovered indicates the
         number of SIDs for which an LFA is found."
    ::= { tmnxOspfSrLfaStatsEntry 3 }

tmnxOspfSrLfaStatsRLfaCovered    OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrLfaStatsRLfaCovered indicates the
         number of SIDs for which an Remote LFA is found."
    ::= { tmnxOspfSrLfaStatsEntry 4 }

tmnxOspfSrLfaStatsTiLfaCovered   OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSrLfaStatsTiLfaCovered indicates the
         number of SIDs for which an Topology Independent LFA is found."
    ::= { tmnxOspfSrLfaStatsEntry 5 }

tmnxOspfIgpSCTable               OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIgpSCEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfIgpSCTable maintains information on IGP Shortcut for each
         instance of OSPF protocol."
    ::= { tmnxOspfObjects 42 }

tmnxOspfIgpSCEntry               OBJECT-TYPE
    SYNTAX      TmnxOspfIgpSCEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfIgpSCTable represents information on IGP
         shortcut parameters configured for an OSPF instance.

         The system creates rows in this table as a result of the creation of a
         row in the general table tmnxOspfGeneralTable, and destroys them when
         that row is destroyed.

         It is only allowed to modify entries in this table when the vRtrID
         index for this row entry is not a VPRN instance and the
         tmnxOspfVersion index is 'version2'.

         An attempt to modify other row entries will result in an
         'inconsistentValue' error."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance
    }
    ::= { tmnxOspfIgpSCTable 1 }

TmnxOspfIgpSCEntry               ::= SEQUENCE
{ tmnxOspfIgpSCAdminState          TmnxAdminState }

tmnxOspfIgpSCAdminState          OBJECT-TYPE
    SYNTAX      TmnxAdminState
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfIgpSCAdminState specifies the desired
         administrative state for IGP shortcuts on this OSPF instance."
    DEFVAL      { outOfService }
    ::= { tmnxOspfIgpSCEntry 2 }

tmnxOspfIgpSCTunnNextHopTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIgpSCTunnNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfIgpSCTunnNextHopTable maintains information on IGP
         Shortcut tunnel-next-hop for each instance of OSPF protocol."
    ::= { tmnxOspfObjects 43 }

tmnxOspfIgpSCTunnNextHopEntry    OBJECT-TYPE
    SYNTAX      TmnxOspfIgpSCTunnNextHopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfIgpSCTunnNextHopTable represents
         information on IGP shortcut tunnel-next-hop parameters configured on
         the system.

         The system creates rows in this table as a result of the creation of a
         row in the general table tmnxOspfGeneralTable, and destroys them when
         that row is destroyed.

         It is only allowed to modify entries in this table when the vRtrID
         index for this row entry is not a VPRN instance and the
         tmnxOspfVersion index is 'version2'.

         An attempt to modify other row entries will result in an
         'inconsistentValue' error."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfIgpSCTunnNextHopFamily
    }
    ::= { tmnxOspfIgpSCTunnNextHopTable 1 }

TmnxOspfIgpSCTunnNextHopEntry    ::= SEQUENCE
{
    tmnxOspfIgpSCTunnNextHopFamily   TmnxIgpSCFamilyType,
    tmnxOspfIgpSCTunnNextHopLstCh    TimeStamp,
    tmnxOspfIgpSCTNHResolution       TResolveStatus,
    tmnxOspfIgpSCTNHResFilterRsvp    TruthValue,
    tmnxOspfIgpSCTNHResFilterSrTe    TruthValue
}

tmnxOspfIgpSCTunnNextHopFamily   OBJECT-TYPE
    SYNTAX      TmnxIgpSCFamilyType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIgpSCTunnNextHopFamily specifies the address
         family for which the tunnel selection applies."
    ::= { tmnxOspfIgpSCTunnNextHopEntry 1 }

tmnxOspfIgpSCTunnNextHopLstCh    OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfIgpSCTunnNextHopLstCh indicates the
         sysUpTime when this row was last modified."
    ::= { tmnxOspfIgpSCTunnNextHopEntry 2 }

tmnxOspfIgpSCTNHResolution       OBJECT-TYPE
    SYNTAX      TResolveStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIgpSCTNHResolution specifies the resolution
         status used for resolving IGP shortcut tunnel next hops belonging to a
         specific family type.

         When the value is 'filter', only selected tunnel types are used to
         resolve routes following TTM preference.

         When the value is 'any', any of the supported tunnel types are
         selected to resolve routes following TTM preference.

         When the value is 'match-family-ip', SR family uses the tunnel types
         selected to resolve corresponding IP family routes except SR-TE
         tunnels.

         When the value is 'disabled' none of the tunnel types are selected."
    DEFVAL      { disabled }
    ::= { tmnxOspfIgpSCTunnNextHopEntry 3 }

tmnxOspfIgpSCTNHResFilterRsvp    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIgpSCTNHResFilterRsvp specifies whether RSVP-TE
         LSPs are allowed to be used for resolving IGP shortcut tunnels
         belonging to a specific family type."
    DEFVAL      { false }
    ::= { tmnxOspfIgpSCTunnNextHopEntry 4 }

tmnxOspfIgpSCTNHResFilterSrTe    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIgpSCTNHResFilterSrTe specifies whether SR-TE
         Ipv4 LSPs are allowed to be used for resolving IGP shortcut tunnels
         belonging to a specific family type."
    DEFVAL      { false }
    ::= { tmnxOspfIgpSCTunnNextHopEntry 5 }

tmnxOspfAdjSetTable              OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAdjSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAdjSetTable maintains information on Adjacency Sets for
         each instance of the OSPF protocol."
    ::= { tmnxOspfObjects 44 }

tmnxOspfAdjSetEntry              OBJECT-TYPE
    SYNTAX      TmnxOspfAdjSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfAdjSetTable represents information on an
         Adjacency Set configured on the system."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAdjSetId
    }
    ::= { tmnxOspfAdjSetTable 1 }

TmnxOspfAdjSetEntry              ::= SEQUENCE
{
    tmnxOspfAdjSetId                 Unsigned32,
    tmnxOspfAdjSetRowStatus          RowStatus,
    tmnxOspfAdjSetLastChanged        TimeStamp,
    tmnxOspfAdjSetSidType            INTEGER,
    tmnxOspfAdjSetSidValue           Unsigned32,
    tmnxOspfAdjSetParallel           TruthValue,
    tmnxOspfAdjSetAdvertise          TruthValue,
    tmnxOspfAdjSetDynSidValue        Unsigned32,
    tmnxOspfAdjSetTunlDestType       InetAddressType,
    tmnxOspfAdjSetTunlDestIp         InetAddress,
    tmnxOspfAdjSetNbrRtrId           TmnxOspfRouterIdTc,
    tmnxOspfAdjSetMembersCount       Unsigned32,
    tmnxOspfAdjSetActiveMembers      Unsigned32,
    tmnxOspfAdjSetUpTime             Integer32,
    tmnxOspfAdjSetStatus             INTEGER,
    tmnxOspfAdjSetMtu                Unsigned32
}

tmnxOspfAdjSetId                 OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetId specifies an identifier for the given
         adjacency set."
    ::= { tmnxOspfAdjSetEntry 1 }

tmnxOspfAdjSetRowStatus          OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetRowStatus specifies the row
         status used for creation, deletion, or control of tmnxOspfAdjSetTable
         entries."
    ::= { tmnxOspfAdjSetEntry 2 }

tmnxOspfAdjSetLastChanged        OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetLastChanged indicates the  sysUpTime when
         this row was last modified."
    ::= { tmnxOspfAdjSetEntry 3 }

tmnxOspfAdjSetSidType            OBJECT-TYPE
    SYNTAX      INTEGER {
        none  (0),
        label (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetSidType specifies whether the object
         tmnxOspfAdjSetSidValue is not valid, an index value or an absolute
         label value."
    DEFVAL      { none }
    ::= { tmnxOspfAdjSetEntry 4 }

tmnxOspfAdjSetSidValue           OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetSidValue together with
         tmnxOspfAdjSetSidType specifies the SID value or index for this
         adjacency set SID."
    DEFVAL      { 0 }
    ::= { tmnxOspfAdjSetEntry 5 }

tmnxOspfAdjSetParallel           OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetParallel specifies whether all links must
         go to the same neighbor."
    DEFVAL      { true }
    ::= { tmnxOspfAdjSetEntry 7 }

tmnxOspfAdjSetAdvertise          OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetAdvertise specifies whether this adjacency
         set should be advertised. Can only be set to true when all links go to
         the same neighbor (parallel=true)."
    DEFVAL      { true }
    ::= { tmnxOspfAdjSetEntry 8 }

tmnxOspfAdjSetDynSidValue        OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetDynSidValue indicates the
         dynamic SID value used for this adjacency-set. In case a static sid is
         configured, the dynamic sid will be 0."
    ::= { tmnxOspfAdjSetEntry 9 }

tmnxOspfAdjSetTunlDestType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetTunlDestType indicates the IP
         address type for tmnxOspfAdjSetTunlDestIp."
    ::= { tmnxOspfAdjSetEntry 10 }

tmnxOspfAdjSetTunlDestIp         OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetTunlDestIp indicates the IP
         address of the adjacency-set tunnel destination. It's set to all zero
         for adjacency-set with members to different neighbors."
    ::= { tmnxOspfAdjSetEntry 11 }

tmnxOspfAdjSetNbrRtrId           OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetNbrRtrId indicates the router Id
         of the member's neighbor node. It's set to all zero for adjacency-set
         with members to different neighbors."
    ::= { tmnxOspfAdjSetEntry 12 }

tmnxOspfAdjSetMembersCount       OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetMembersCount indicates the
         number of interfaces that are a member of the adjacency-set."
    ::= { tmnxOspfAdjSetEntry 13 }

tmnxOspfAdjSetActiveMembers      OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetActiveMembers indicates the
         number of active adjacencies that are a member of the adjacancy-set."
    ::= { tmnxOspfAdjSetEntry 14 }

tmnxOspfAdjSetUpTime             OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetUpTime indicates the amount of
         time in seconds since this adjacency-set was last programmed."
    ::= { tmnxOspfAdjSetEntry 15 }

tmnxOspfAdjSetStatus             OBJECT-TYPE
    SYNTAX      INTEGER {
        notActive        (0),
        active           (1),
        activeIncomplete (2),
        fibAddFailed     (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetStatus indicates the reason why an adj-set
         is not active."
    ::= { tmnxOspfAdjSetEntry 16 }

tmnxOspfAdjSetMtu                OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetMtu indicates the MTU of the adjacency-set
         tunnel. This value takes into account the lowest value of active
         links, the label overhead and the segment-routing tunnel-mtu"
    ::= { tmnxOspfAdjSetEntry 17 }

tmnxOspfIfAdjSetTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfIfAdjSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfIfAdjSetTable maintains a list of Adjacency Sets assigned
         to an interface."
    ::= { tmnxOspfObjects 45 }

tmnxOspfIfAdjSetEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfIfAdjSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfIfAdjSetTable indicates that the
         interface is assigned to an adjacency set (tmnxOspfAdjSetEntry).

         The adjacency-set must exist under segment routing before it can be
         assigned to an interface."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfNgIfIndex,
        tmnxOspfNgIfInstId,
        tmnxOspfNgIfAreaId,
        tmnxOspfIfAdjSetId
    }
    ::= { tmnxOspfIfAdjSetTable 1 }

TmnxOspfIfAdjSetEntry            ::= SEQUENCE
{
    tmnxOspfIfAdjSetId               Unsigned32,
    tmnxOspfIfAdjSetRowStatus        RowStatus,
    tmnxOspfIfAdjSetLastChanged      TimeStamp
}

tmnxOspfIfAdjSetId               OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfAdjSetId specifies an identifier for the given
         adjacency set."
    ::= { tmnxOspfIfAdjSetEntry 1 }

tmnxOspfIfAdjSetRowStatus        OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfIfAdjSetRowStatus specifies the row
         status used for creation, deletion, or control of
         tmnxOspfIfAdjSetTable entries."
    ::= { tmnxOspfIfAdjSetEntry 2 }

tmnxOspfIfAdjSetLastChanged      OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfIfAdjSetLastChanged indicates the  sysUpTime when
         this row was last modified."
    ::= { tmnxOspfIfAdjSetEntry 3 }

tmnxOspfAdjSetNhopTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfAdjSetNhopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfAdjSetNhopTable maintains information on Adjacency-Set
         nhop for each instance of OSPF protocol."
    ::= { tmnxOspfObjects 46 }

tmnxOspfAdjSetNhopEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfAdjSetNhopEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfAdjSetNhopTable represents information
         on an Adjacency Set configured on the system."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfAdjSetNhopId,
        tmnxOspfAdjSetNhopRtrId,
        tmnxOspfAdjSetNhopIfIndex
    }
    ::= { tmnxOspfAdjSetNhopTable 1 }

TmnxOspfAdjSetNhopEntry          ::= SEQUENCE
{
    tmnxOspfAdjSetNhopId             Unsigned32,
    tmnxOspfAdjSetNhopRtrId          TmnxOspfRouterIdTc,
    tmnxOspfAdjSetNhopIfIndex        InterfaceIndex,
    tmnxOspfAdjSetNhopType           InetAddressType,
    tmnxOspfAdjSetNhop               InetAddress
}

tmnxOspfAdjSetNhopId             OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfAdjSetNhopId specifies an identifier for the
         given adjacency set."
    ::= { tmnxOspfAdjSetNhopEntry 1 }

tmnxOspfAdjSetNhopRtrId          OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetNhopRtrId specifies the
         router-id of the nexthop and is used to reference the nexthop for this
         adjacency-set link."
    ::= { tmnxOspfAdjSetNhopEntry 2 }

tmnxOspfAdjSetNhopIfIndex        OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetNhopIfIndex specifies the
         ifIndex of the outgoing interface for the path."
    ::= { tmnxOspfAdjSetNhopEntry 3 }

tmnxOspfAdjSetNhopType           OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetNhopType indicates the IP
         address type for tmnxOspfAdjSetNhop."
    ::= { tmnxOspfAdjSetNhopEntry 4 }

tmnxOspfAdjSetNhop               OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16|20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfAdjSetNhop indicates the IP address of
         the next hop for this adjacency-set link."
    ::= { tmnxOspfAdjSetNhopEntry 5 }

tmnxOspfSRMSSidMapTable          OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfSRMSSidMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfSRMSSidMapTable contains objects to configure Segment
         Routing (SR) Mapping Server (MS) SID data for OSPF prefixes."
    ::= { tmnxOspfObjects 47 }

tmnxOspfSRMSSidMapEntry          OBJECT-TYPE
    SYNTAX      TmnxOspfSRMSSidMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each conceptual row in the tmnxOspfSRMSSidMapTable contains Segment
         Routing (SR) Mapping Server (MS) SID information of an OSPF prefix.

         Entries in this table can be created and deleted via SNMP SET
         operations to tmnxOspfSRMSSidMapRowStatus."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfSRMSSidMapNodeSidIndex
    }
    ::= { tmnxOspfSRMSSidMapTable 1 }

TmnxOspfSRMSSidMapEntry          ::= SEQUENCE
{
    tmnxOspfSRMSSidMapNodeSidIndex   Unsigned32,
    tmnxOspfSRMSSidMapRowStatus      RowStatus,
    tmnxOspfSRMSSidMapLastCh         TimeStamp,
    tmnxOspfSRMSSidMapPrefixType     TmnxAddressAndPrefixType,
    tmnxOspfSRMSSidMapPrefix         TmnxAddressAndPrefixAddress,
    tmnxOspfSRMSSidMapPrefixLength   TmnxAddressAndPrefixPrefix,
    tmnxOspfSRMSSidMapNodeSidRange   Unsigned32,
    tmnxOspfSRMSSidMapScope          INTEGER,
    tmnxOspfSRMSSidMapScopeArea      TmnxOspfAreaIdTc
}

tmnxOspfSRMSSidMapNodeSidIndex   OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapNodeSidIndex specifies the
         the node SID index/label for the OSPF prefix which will be advertised
         in a SID/Label Binding TLV."
    ::= { tmnxOspfSRMSSidMapEntry 1 }

tmnxOspfSRMSSidMapRowStatus      OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapRowStatus specifies the row
         status used to create and delete entries in the
         tmnxOspfSRMSSidMapTable.

         To create a row, set this object to 'createAndGo(4)'. For the row
         creation to succeed the prefix must be set in the same SNMP SET PDU;
         i.e. the value of tmnxOspfSRMSSidMapPrefixType and
         tmnxOspfSRMSSidMapPrefixLength must be set to a non-zero value and
         tmnxOspfSRMSSidMapPrefix must be set to a non-empty string."
    ::= { tmnxOspfSRMSSidMapEntry 2 }

tmnxOspfSRMSSidMapLastCh         OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapLastCh specifies the
         sysUpTime when a configurable object in this row was last modified."
    ::= { tmnxOspfSRMSSidMapEntry 3 }

tmnxOspfSRMSSidMapPrefixType     OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapPrefixType specifies the IP
         address type of tmnxOspfSRMSSidMapPrefix."
    ::= { tmnxOspfSRMSSidMapEntry 4 }

tmnxOspfSRMSSidMapPrefix         OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixAddress (SIZE (4|16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapPrefix specifies the IP
         address of the OSPF prefix which will be advertised in a SID/Label
         Binding TLV by the SR Mapping Server."
    ::= { tmnxOspfSRMSSidMapEntry 5 }

tmnxOspfSRMSSidMapPrefixLength   OBJECT-TYPE
    SYNTAX      TmnxAddressAndPrefixPrefix
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapPrefixLength specifies the
         prefix length to be used with tmnxOspfSRMSSidMapPrefix to get the SR
         Mapping Server prefix."
    ::= { tmnxOspfSRMSSidMapEntry 6 }

tmnxOspfSRMSSidMapNodeSidRange   OBJECT-TYPE
    SYNTAX      Unsigned32 (1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapNodeSidRange specifies the
         the node SID range for the OSPF prefix which will be advertised in a
         SID/Label Binding TLV."
    DEFVAL      { 1 }
    ::= { tmnxOspfSRMSSidMapEntry 7 }

tmnxOspfSRMSSidMapScope          OBJECT-TYPE
    SYNTAX      INTEGER {
        as   (1),
        area (2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapScope specifies the own
         flooding scope for the generated OSPF Extended Prefix Range TLV.

         When the value is set to 'as', the TLV is flooded in the whole
         autonomous system.

         When the value is set to 'area', the TLV is only flooded in the area
         specified by tmnxOspfSRMSSidMapScopeArea."
    DEFVAL      { as }
    ::= { tmnxOspfSRMSSidMapEntry 8 }

tmnxOspfSRMSSidMapScopeArea      OBJECT-TYPE
    SYNTAX      TmnxOspfAreaIdTc
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSRMSSidMapScopeArea specifies the area
         to flood the OSPF Extended Prefix Range TLV in.

         The TLV is only flooded in this specfied area in case the object
         tmnxOspfSRMSSidMapScope is set to 'area'."
    DEFVAL      { 0 }
    ::= { tmnxOspfSRMSSidMapEntry 9 }

tmnxOspfSidStatsTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfSidStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfSidStatsTable provides statistics for each OSPF  Segment
         Identifier (SID) on ingress and egress and per SID type."
    ::= { tmnxOspfObjects 48 }

tmnxOspfSidStatsEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfSidStatsEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfSidStatsEntry stores statistics for an
         OSPF SID."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfSidStatsSid
    }
    ::= { tmnxOspfSidStatsTable 1 }

TmnxOspfSidStatsEntry            ::= SEQUENCE
{
    tmnxOspfSidStatsSid              Unsigned32,
    tmnxOspfSidStatsSidType          INTEGER,
    tmnxOspfSidStatsPrefixType       InetAddressType,
    tmnxOspfSidStatsPrefix           InetAddress,
    tmnxOspfSidStatsPrefixLength     InetAddressPrefixLength,
    tmnxOspfSidStatsIfIndex          InterfaceIndexOrZero,
    tmnxOspfSidStatsAdjSet           Unsigned32,
    tmnxOspfSidStatsIngressOperState INTEGER,
    tmnxOspfSidStatsIngressOctets    Counter64,
    tmnxOspfSidStatsIngressPackets   Counter64,
    tmnxOspfSidStatsEgressOperState  INTEGER,
    tmnxOspfSidStatsEgressOctets     Counter64,
    tmnxOspfSidStatsEgressPackets    Counter64
}

tmnxOspfSidStatsSid              OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsSid specifies the SID for
         which statistics are collected."
    ::= { tmnxOspfSidStatsEntry 1 }

tmnxOspfSidStatsSidType          OBJECT-TYPE
    SYNTAX      INTEGER {
        node         (0),
        adjacency    (1),
        adjacencySet (2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsSidType indicates the type of
         SID for which statistics are collected."
    ::= { tmnxOspfSidStatsEntry 2 }

tmnxOspfSidStatsPrefixType       OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsPrefixType indicates the IP
         address type of tmnxOspfSidStatsPrefix."
    ::= { tmnxOspfSidStatsEntry 3 }

tmnxOspfSidStatsPrefix           OBJECT-TYPE
    SYNTAX      InetAddress (SIZE (0|4|16))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsPrefix indicates the IP
         address of the prefix for which SID statistics are collected."
    ::= { tmnxOspfSidStatsEntry 4 }

tmnxOspfSidStatsPrefixLength     OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsPrefixLength indicates the
         prefix length to be used with tmnxOspfSidStatsPrefix to get the SID
         prefix."
    ::= { tmnxOspfSidStatsEntry 5 }

tmnxOspfSidStatsIfIndex          OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsIfIndex specifies the
         Interface Index on which the adjacency that uses this SID is
         established in case the object tmnxOspfSidStatsSidType is 'adjacency'.

         The value of this object contains '0' in case the object
         tmnxOspfSidStatsSidType is different from 'adjacency'."
    ::= { tmnxOspfSidStatsEntry 6 }

tmnxOspfSidStatsAdjSet           OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsAdjSet specifies the Adjacency
         Set Identifier in case the object tmnxOspfSidStatsSidType is
         'adjacencySet'.

         The value of this object contains '0' in case the object
         tmnxOspfSidStatsSidType is different from 'adjacencySet'."
    ::= { tmnxOspfSidStatsEntry 7 }

tmnxOspfSidStatsIngressOperState OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled    (1),
        disabled   (2),
        noResource (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsIngressOperState indicates the
         operating state of this SID on ingress direction."
    ::= { tmnxOspfSidStatsEntry 8 }

tmnxOspfSidStatsIngressOctets    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsIngressOctets indicates the
         number of ingress octets."
    ::= { tmnxOspfSidStatsEntry 9 }

tmnxOspfSidStatsIngressPackets   OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsIngressPackets indicates the
         number of ingress packets."
    ::= { tmnxOspfSidStatsEntry 10 }

tmnxOspfSidStatsEgressOperState  OBJECT-TYPE
    SYNTAX      INTEGER {
        enabled    (1),
        disabled   (2),
        noResource (3)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsEgressOperState indicates the
         operating state of this SID on egress direction."
    ::= { tmnxOspfSidStatsEntry 11 }

tmnxOspfSidStatsEgressOctets     OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsEgressOctets indicates the
         number of ingress octets."
    ::= { tmnxOspfSidStatsEntry 12 }

tmnxOspfSidStatsEgressPackets    OBJECT-TYPE
    SYNTAX      Counter64
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfSidStatsEgressPackets indicates the
         number of ingress packets."
    ::= { tmnxOspfSidStatsEntry 13 }

tmnxOspfHostnameTable            OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfHostnameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfHostnameTable provides the mapping of a router-id to the
         hostname as provided by the router. This table may not have mapping of
         all router-id to hostname as it is not mandatory to exchange
         hostnames."
    ::= { tmnxOspfObjects 49 }

tmnxOspfHostnameEntry            OBJECT-TYPE
    SYNTAX      TmnxOspfHostnameEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfHostnameEntry stores the mapping of a
         router-id to a hostname."
    INDEX       {
        vRtrID,
        tmnxOspfVersion,
        tmnxOspfInstance,
        tmnxOspfHostnameRtrId
    }
    ::= { tmnxOspfHostnameTable 1 }

TmnxOspfHostnameEntry            ::= SEQUENCE
{
    tmnxOspfHostnameRtrId            TmnxOspfRouterIdTc,
    tmnxOspfHostnameName             DisplayString
}

tmnxOspfHostnameRtrId            OBJECT-TYPE
    SYNTAX      TmnxOspfRouterIdTc
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfHostnameRtrId specifies the router-id
         for which we map the hostname in the object tmnxOspfHostnameName."
    ::= { tmnxOspfHostnameEntry 1 }

tmnxOspfHostnameName             OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of the object tmnxOspfHostnameName indicates the mapping
         hostname for the corresponding router-id. An empty string indicates no
         (valid) mapping is available."
    ::= { tmnxOspfHostnameEntry 2 }

tmnxOspfScalarObjs               OBJECT IDENTIFIER ::= { tmnxOspfObjects 50 }

tmnxOspfScalarDynHostnames       OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfScalarDynHostnames specifies whether dynamic
         hostnames are enabled or not."
    DEFVAL      { false }
    ::= { tmnxOspfScalarObjs 1 }

tmnxOspfSegmentRoutingTable      OBJECT-TYPE
    SYNTAX      SEQUENCE OF TmnxOspfSegmentRoutingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The tmnxOspfSegmentRoutingTable provides an extension of the
         tmnxOspfGeneralTable for Segment Routing."
    ::= { tmnxOspfObjects 51 }

tmnxOspfSegmentRoutingEntry      OBJECT-TYPE
    SYNTAX      TmnxOspfSegmentRoutingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each row entry in the tmnxOspfSegmentRoutingTable represents
         additional columns for an OSPF instance."
    AUGMENTS    { tmnxOspfGeneralEntry }
    ::= { tmnxOspfSegmentRoutingTable 1 }

TmnxOspfSegmentRoutingEntry      ::= SEQUENCE
{
    tmnxOspfSrLastChanged            TimeStamp,
    tmnxOspfSrMsdOverrideBmi         Integer32,
    tmnxOspfSrMsdOverrideErld        Integer32
}

tmnxOspfSrLastChanged            OBJECT-TYPE
    SYNTAX      TimeStamp
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrLastChanged indicates the sysUpTime when a
         configurable object in this row was last modified."
    ::= { tmnxOspfSegmentRoutingEntry 1 }

tmnxOspfSrMsdOverrideBmi         OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..12)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrMsdOverrideBmi specifies the override Base MPLS
         Imposition (BMI) Maximum Sid Depth (MSD) value that will be announced
         when Segment Routing is enabled.

         The value '-1' indicates that the default MSD value will be used. The
         default MSD value announced is the maximum value the platform supports
         under ideal conditions.

         The supported override range depends on the platform."
    DEFVAL      { -1 }
    ::= { tmnxOspfSegmentRoutingEntry 2 }

tmnxOspfSrMsdOverrideErld        OBJECT-TYPE
    SYNTAX      Integer32 (-1 | 0..15)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value of tmnxOspfSrMsdOverrideErld specifies the override Entropy
         Readable Label Depth (ERLD) Maximum Sid Depth (MSD) value  that will
         be announced when Segment Routing is enabled.

         The value '-1' indicates that the default MSD value will be used. The
         default MSD value announced is the maximum value the platform supports
         under ideal conditions.

         The supported override range depends on the platform."
    DEFVAL      { -1 }
    ::= { tmnxOspfSegmentRoutingEntry 3 }

tmnxOspfConformance              OBJECT IDENTIFIER ::= { tmnxSRConfs 36 }

tmnxOspfCompliances              OBJECT IDENTIFIER ::= { tmnxOspfConformance 1 }

tmnxOspfCompliance               MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on Nokia 7x50
         SR series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralGroup,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfGroup,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup
        }
    ::= { tmnxOspfCompliances 1 }

tmnxOspfV5v0Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on Nokia SROS
         series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfV5v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup
        }
    ::= { tmnxOspfCompliances 2 }

tmnxOspfV6v0Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 6.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfV5v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup,
            tmnxOspfIfV6v0Group,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV6v0Group
        }
    ::= { tmnxOspfCompliances 3 }

tmnxOspfV6v1Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 6.1
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfV5v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup,
            tmnxOspfIfV6v0Group,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV6v0Group,
            tmnxOspfGeneralV6v1Group
        }
    ::= { tmnxOspfCompliances 4 }

tmnxOspfV7v0Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 7.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfV5v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup,
            tmnxOspfIfV6v0Group,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV6v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfNotifyObjsV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp
        }
    ::= { tmnxOspfCompliances 5 }

tmnxOspfV8v0Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 8.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaGroup,
            tmnxOspfHostGroup,
            tmnxOspfIfV5v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNbrGroup,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyGroup,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfNotificationGroup,
            tmnxOspfIfV6v0Group,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV6v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfNotifyObjsV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfAreaV8v0Group,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfNotifyObjsV8v0Group,
            tmnxOspfGeneralV8v0Group
        }
    ::= { tmnxOspfCompliances 6 }

tmnxOspfV9v0Compliance           MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 9.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV9v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group
        }
    ::= { tmnxOspfCompliances 7 }

tmnxOspfV10v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 10.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV9v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group
        }
    ::= { tmnxOspfCompliances 8 }

tmnxOspfV11v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 11.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV9v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group
        }
    ::= { tmnxOspfCompliances 9 }

tmnxOspfV12v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 12.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV9v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV7v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfNotificationV12v0Group
        }
    ::= { tmnxOspfCompliances 10 }

tmnxOspfV13v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 13.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group
        }
    ::= { tmnxOspfCompliances 11 }

tmnxOspfV14v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 14.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfSegmentRoutingTEGroup,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group,
            tmnxOspfGeneralV14v0Group
        }
    ::= { tmnxOspfCompliances 12 }

tmnxOspfV15v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 15.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfSegmentRoutingTEGroup,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group,
            tmnxOspfGeneralV14v0Group,
            tmnxOspfGeneralV15v0Group,
            tmnxOspfIgpSC15v0Group,
            tmnxOspfObsolete15v0Group
        }
    ::= { tmnxOspfCompliances 13 }

tmnxOspfV16v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 16.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfSegmentRoutingTEGroup,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group,
            tmnxOspfGeneralV14v0Group,
            tmnxOspfGeneralV15v0Group,
            tmnxOspfIgpSC15v0Group,
            tmnxOspfObsolete16v0Group,
            tmnxOspfGeneralV16v0Group,
            tmnxOspfNotifyObjsV16v0Group,
            tmnxOspfNotificationV16v0Group,
            tmnxOspfNetworkElementV16v0Group
        }
    ::= { tmnxOspfCompliances 14 }

tmnxOspfV19v0Compliance          MODULE-COMPLIANCE
    STATUS      obsolete
    DESCRIPTION
        "The compliance statement for management of OSPF features on 19.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfNotificationV9v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfNotificationV7v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfSegmentRoutingTEGroup,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group,
            tmnxOspfGeneralV14v0Group,
            tmnxOspfGeneralV15v0Group,
            tmnxOspfIgpSC15v0Group,
            tmnxOspfObsolete16v0Group,
            tmnxOspfGeneralV16v0Group,
            tmnxOspfNotifyObjsV16v0Group,
            tmnxOspfNotificationV16v0Group,
            tmnxOspfGeneralV19v0Group,
            tmnxOspfObsolete19v0Group,
            tmnxOspfNotificationV19v0Group
        }
    ::= { tmnxOspfCompliances 15 }

tmnxOspfV20v0Compliance          MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for management of OSPF features on 20.0
         release of Nokia SROS series systems."
    MODULE
        MANDATORY-GROUPS {
            tmnxOspfGeneralV5v0Group,
            tmnxOspfAreaV9v0Group,
            tmnxOspfNgLinkLsdbV9v0Group,
            tmnxOspfHostGroup,
            tmnxOspfNgIfV9v0Group,
            tmnxOspfNgIfOperV9v0Group,
            tmnxOspfNgIfStatsV9v0Group,
            tmnxOspfVirtIfGroup,
            tmnxOspfNgNbrV9v0Group,
            tmnxOspfVirtNbrGroup,
            tmnxOspfAreaAggrGroup,
            tmnxOspfMD5KeyV13v0Group,
            tmnxOspfNotifyObjsGroup,
            tmnxOspfGeneralV6v0Group,
            tmnxOspfGeneralV6v1Group,
            tmnxOspfShamLinksV13v0Group,
            tmnxOspfGeneralV7v0Group,
            tmnxOspfGenNotificationV7v0Grp,
            tmnxOspfIfV8v0Group,
            tmnxOspfVirtIfV8v0Group,
            tmnxOspfGeneralV8v0Group,
            tmnxOspfGeneralV10v0Group,
            tmnxOspfFRRV10v0Group,
            tmnxOspfFRRV11v0Group,
            tmnxOspfGeneralV11v0Group,
            tmnxOspfGeneralV12v0Group,
            tmnxOspfGeneralV13v0Group,
            tmnxOspfSegmentRoutingTEGroup,
            tmnxOspfNotificationV13v0Group,
            tmnxOspfNotificationV12v0Group,
            tmnxOspfGeneralV14v0Group,
            tmnxOspfGeneralV15v0Group,
            tmnxOspfIgpSC15v0Group,
            tmnxOspfObsolete16v0Group,
            tmnxOspfGeneralV16v0Group,
            tmnxOspfNotifyObjsV16v0Group,
            tmnxOspfNotificationV16v0Group,
            tmnxOspfGeneralV19v0Group,
            tmnxOspfObsolete19v0Group,
            tmnxOspfNotificationV19v0Group,
            tmnxOspfGeneralV20v0Group,
            tmnxOspfNotificationV20v0Group,
            tmnxOspfObsoletedNotifV20v0Group
        }
    ::= { tmnxOspfCompliances 16 }

tmnxOspfGroups                   OBJECT IDENTIFIER ::= { tmnxOspfConformance 2 }

tmnxOspfGeneralGroup             OBJECT-GROUP
    OBJECTS     {
        tmnxOspfGeneralEntries,
        tmnxOspfGeneralLastChanged,
        tmnxOspfRouterId,
        tmnxOspfAdminState,
        tmnxOspfASBdrRtrStatus,
        tmnxOspfRFC1583Compatibility,
        tmnxOspfExtLsdbLimit,
        tmnxOspfMulticastExtensions,
        tmnxOspfExitOverflowInterval,
        tmnxOspfDemandExtensions,
        tmnxOspfReferenceBandwidth,
        tmnxOspfStrictLsaChecking,
        tmnxOspfRestartSupport,
        tmnxOspfRestartInterval,
        tmnxOspfPreference,
        tmnxOspfExternalPreference,
        tmnxOspfExportPolicy1,
        tmnxOspfExportPolicy2,
        tmnxOspfExportPolicy3,
        tmnxOspfExportPolicy4,
        tmnxOspfExportPolicy5,
        tmnxOspfManualSpfTrigger,
        tmnxOspfOverloadAdmState,
        tmnxOspfOverloadInterval,
        tmnxOspfBootOverloadAdmState,
        tmnxOspfBootOverloadInterval,
        tmnxOspfOverloadStubs,
        tmnxOspfSpfMaxWait,
        tmnxOspfSpfInitialWait,
        tmnxOspfSpfSecondWait,
        tmnxOspfLsaGenMaxWait,
        tmnxOspfLsaGenInitialWait,
        tmnxOspfLsaGenSecondWait,
        tmnxOspfLsaArrivalWait,
        tmnxOspfTESupport,
        tmnxOspfUnicastImport,
        tmnxOspfMulticastImport,
        tmnxOspfGREnable,
        tmnxOspfGRHelperMode,
        tmnxOspfAreaBdrRtrStatus,
        tmnxOspfBackBoneRouter,
        tmnxOspfStubRouterSupport,
        tmnxOspfAsScopeLsaCount,
        tmnxOspfAsScopeLsaCksumSum,
        tmnxOspfAsScopeUnkLsaCount,
        tmnxOspfAsScopeUnkLsaCksumSum,
        tmnxOspfExternLsaCount,
        tmnxOspfExternLsaCksumSum,
        tmnxOspfOpaqueLsaSupport,
        tmnxOspfRestartStatus,
        tmnxOspfRestartAge,
        tmnxOspfRestartExitRc,
        tmnxOspfDiscontinuityTime,
        tmnxOspfLastEnabledTime,
        tmnxOspfLastOvrflwEnteredTime,
        tmnxOspfLastOverflowExitTime,
        tmnxOspfInOverflowState,
        tmnxOspfOverloadOperState,
        tmnxOspfOverloadRemInterval,
        tmnxOspfLastOverloadEntrdTime,
        tmnxOspfLastOverloadExitTime,
        tmnxOspfLastOverloadEnterCode,
        tmnxOspfLastOverloadExitCode,
        tmnxOspfLastExtSpfRunTime,
        tmnxOspfLastFullSpfRunTime,
        tmnxOspfLastFullSpfInterval,
        tmnxOspfMaxSpfRunInterval,
        tmnxOspfMinSpfRunInterval,
        tmnxOspfAvgSpfRunInterval,
        tmnxOspfExtSpfRunInterval,
        tmnxOspfRoutesSubmitted,
        tmnxOspfOriginateNewLsas,
        tmnxOspfRxNewLsas,
        tmnxOspfFullSpfRuns,
        tmnxOspfExtSpfRuns,
        tmnxOspfIncremntlInterSpfRuns,
        tmnxOspfIncrementalExtSpfRuns,
        tmnxOspfSpfAttemptsFailed,
        tmnxOspfNumTimesInOverload,
        tmnxOspfNumTimesInOverflow,
        tmnxOspfRoutesAddsFailed,
        tmnxOspfRoutesDelsFailed,
        tmnxOspfRoutesModsFailed,
        tmnxOspfAreaEntries,
        tmnxOspfAreaLsaCountEntries,
        tmnxOspfAsLsdbEntries,
        tmnxOspfAreaLsdbEntries,
        tmnxOspfLinkLsdbEntries,
        tmnxOspfHostEntries,
        tmnxOspfIfEntries,
        tmnxOspfVirtIfEntries,
        tmnxOspfNbrEntries,
        tmnxOspfCfgNbrEntries,
        tmnxOspfVirtNbrEntries,
        tmnxOspfAreaAggrEntries,
        tmnxOspfIfMD5KeyEntries,
        tmnxOspfVirtIfMD5KeyEntries,
        tmnxOspfCSPFRequests,
        tmnxOspfCSPFDroppedRequests,
        tmnxOspfCSPFPathsFound,
        tmnxOspfCSPFPathsNotFound,
        tmnxOspfAreaTableChanged,
        tmnxOspfHostTableChanged,
        tmnxOspfIfTableChanged,
        tmnxOspfVirtIfTableChanged,
        tmnxOspfNbrTableChanged,
        tmnxOspfCfgNbrTableChanged,
        tmnxOspfVirtNbrTableChanged,
        tmnxOspfAreaAggTableChanged,
        tmnxOspfIfMD5KeyTableChanged,
        tmnxOspfVirtIfMD5KeyTableChanged,
        tmnxOspfIgnoreDNBit,
        tmnxOspfSuppressDNBit
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 1 }

tmnxOspfAreaGroup                OBJECT-GROUP
    OBJECTS     {
        tmnxOspfAreaStatus,
        tmnxOspfAreaLastChanged,
        tmnxOspfImportAsExtern,
        tmnxOspfAreaSummary,
        tmnxOspfAreaRangeBlackhole,
        tmnxOspfStubMetric,
        tmnxOspfAreaStubMetricType,
        tmnxOspfAreaOriginateDefault,
        tmnxOspfAreaNssaRedistribute,
        tmnxOspfAreaNssaTranslatorRole,
        tmnxOspfAreaNssaTranslatorStabInt,
        tmnxOspfAreaBdrRtrCount,
        tmnxOspfAreaAsBdrRtrCount,
        tmnxOspfAreaScopeLsaCount,
        tmnxOspfAreaScopeLsaCksumSum,
        tmnxOspfAreaScopeUnkLsaCount,
        tmnxOspfAreaScopeUnkLsaCksumSum,
        tmnxOspfAreaNssaTranslatorState,
        tmnxOspfAreaActiveInterfaces,
        tmnxOspfAreaInterfaceCount,
        tmnxOspfAreaVirtualLinkCount,
        tmnxOspfAreaLastSpfRunTime,
        tmnxOspfAreaSpfRuns,
        tmnxOspfAreaNssaTranslatorEvents,
        tmnxOspfAreaNeighborCount,
        tmnxOspfAreaLsaCountNumber,
        tmnxOspfAsLsdbSequence,
        tmnxOspfAsLsdbAge,
        tmnxOspfAsLsdbChecksum,
        tmnxOspfAsLsdbAdvertisement,
        tmnxOspfAsLsdbTypeKnown,
        tmnxOspfAreaLsdbSequence,
        tmnxOspfAreaLsdbAge,
        tmnxOspfAreaLsdbChecksum,
        tmnxOspfAreaLsdbAdvertisement,
        tmnxOspfAreaLsdbTypeKnown,
        tmnxOspfLinkLsdbSequence,
        tmnxOspfLinkLsdbAge,
        tmnxOspfLinkLsdbChecksum,
        tmnxOspfLinkLsdbAdvertisement,
        tmnxOspfLinkLsdbTypeKnown
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Areas on Nokia
         SROS series systems."
    ::= { tmnxOspfGroups 2 }

tmnxOspfHostGroup                OBJECT-GROUP
    OBJECTS     {
        tmnxOspfHostMetric,
        tmnxOspfHostStatus,
        tmnxOspfHostLastChanged,
        tmnxOspfHostAreaID
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Hosts on Nokia
         SROS series systems."
    ::= { tmnxOspfGroups 3 }

tmnxOspfIfGroup                  OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfStatus,
        tmnxOspfIfLastChanged,
        tmnxOspfIfAreaId,
        tmnxOspfIfCfgType,
        tmnxOspfIfAdminState,
        tmnxOspfIfRtrPriority,
        tmnxOspfIfTransitDelay,
        tmnxOspfIfRetransInterval,
        tmnxOspfIfHelloInterval,
        tmnxOspfIfRtrDeadInterval,
        tmnxOspfIfPollInterval,
        tmnxOspfIfMulticastForwarding,
        tmnxOspfIfCfgMTU,
        tmnxOspfIfCfgMetric,
        tmnxOspfIfPassive,
        tmnxOspfIfAdvtSubnet,
        tmnxOspfIfDemand,
        tmnxOspfIfDemandNbrProbe,
        tmnxOspfIfDemandNbrProbeRetxLimit,
        tmnxOspfIfDemandNbrProbeInterval,
        tmnxOspfIfAuthType,
        tmnxOspfIfAuthKey,
        tmnxOspfIfState,
        tmnxOspfIfLastEnabledTime,
        tmnxOspfIfOperMTU,
        tmnxOspfIfMetricValue,
        tmnxOspfIfDRId,
        tmnxOspfIfDRIpAddrType,
        tmnxOspfIfDRIpAddr,
        tmnxOspfIfBDRId,
        tmnxOspfIfBDRIpAddrType,
        tmnxOspfIfBDRIpAddr,
        tmnxOspfIfLinkLsaCount,
        tmnxOspfIfLinkLsaCksumSum,
        tmnxOspfIfLinkUnkLsaCount,
        tmnxOspfIfLinkUnkLsaCksumSum,
        tmnxOspfIfMD5TransmitKeyId,
        tmnxOspfIfLocalIpAddressType,
        tmnxOspfIfLocalIpAddress,
        tmnxOspfIfMD5NumKeys,
        tmnxOspfIfType,
        tmnxOspfIfEnableBfd,
        tmnxOspfIfEvents,
        tmnxOspfIfTxPackets,
        tmnxOspfIfTxHellos,
        tmnxOspfIfTxDBDs,
        tmnxOspfIfTxLSRs,
        tmnxOspfIfTxLSUs,
        tmnxOspfIfTxLSAcks,
        tmnxOspfIfRxPackets,
        tmnxOspfIfRxHellos,
        tmnxOspfIfRxDBDs,
        tmnxOspfIfRxLSRs,
        tmnxOspfIfRxLSUs,
        tmnxOspfIfRxLSAcks,
        tmnxOspfIfDiscardPackets,
        tmnxOspfIfRetransmitOuts,
        tmnxOspfIfBadVersions,
        tmnxOspfIfBadNetworks,
        tmnxOspfIfBadVirtualLinks,
        tmnxOspfIfBadAreas,
        tmnxOspfIfBadDstAddrs,
        tmnxOspfIfBadNeighbors,
        tmnxOspfIfBadPacketTypes,
        tmnxOspfIfNeighborCount,
        tmnxOspfIfLastEventTime,
        tmnxOspfIfBadLengths,
        tmnxOspfIfBadHelloIntervals,
        tmnxOspfIfBadDeadIntervals,
        tmnxOspfIfBadOptions,
        tmnxOspfIfRxBadChecksums,
        tmnxOspfIfBadAuthTypes,
        tmnxOspfIfAuthFailures
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 4 }

tmnxOspfVirtIfGroup              OBJECT-GROUP
    OBJECTS     {
        tmnxOspfVirtIfStatus,
        tmnxOspfVirtIfLastChanged,
        tmnxOspfVirtIfIndex,
        tmnxOspfVirtIfInstId,
        tmnxOspfVirtIfAdminStat,
        tmnxOspfVirtIfTransitDelay,
        tmnxOspfVirtIfRetransInterval,
        tmnxOspfVirtIfHelloInterval,
        tmnxOspfVirtIfRtrDeadInterval,
        tmnxOspfVirtIfAuthType,
        tmnxOspfVirtIfAuthKey,
        tmnxOspfVirtIfState,
        tmnxOspfVirtIfLastEnabledTime,
        tmnxOspfVirtIfCost,
        tmnxOspfVirtIfLinkLsaCount,
        tmnxOspfVirtIfLinkLsaCksumSum,
        tmnxOspfVirtIfLinkUnkLsaCount,
        tmnxOspfVirtIfLinkUnkLsaCksumSum,
        tmnxOspfVirtIfMD5TransmitKeyId,
        tmnxOspfVirtIfLocalIpAddrType,
        tmnxOspfVirtIfLocalIpAddress,
        tmnxOspfVirtIfMD5NumKeys,
        tmnxOspfVirtIfEvents,
        tmnxOspfVirtIfTxPackets,
        tmnxOspfVirtIfTxHellos,
        tmnxOspfVirtIfTxDBDs,
        tmnxOspfVirtIfTxLSRs,
        tmnxOspfVirtIfTxLSUs,
        tmnxOspfVirtIfTxLSAcks,
        tmnxOspfVirtIfRxPackets,
        tmnxOspfVirtIfRxHellos,
        tmnxOspfVirtIfRxDBDs,
        tmnxOspfVirtIfRxLSRs,
        tmnxOspfVirtIfRxLSUs,
        tmnxOspfVirtIfRxLSAcks,
        tmnxOspfVirtIfDiscardPackets,
        tmnxOspfVirtIfRetransmitOuts,
        tmnxOspfVirtIfBadVersions,
        tmnxOspfVirtIfBadNetworks,
        tmnxOspfVirtIfBadAreas,
        tmnxOspfVirtIfBadDstAddrs,
        tmnxOspfVirtIfBadNeighbors,
        tmnxOspfVirtIfBadPacketTypes,
        tmnxOspfVirtIfLastEventTime,
        tmnxOspfVirtIfBadLengths,
        tmnxOspfVirtIfBadHelloIntervls,
        tmnxOspfVirtIfBadDeadIntervals,
        tmnxOspfVirtIfBadOptions,
        tmnxOspfVirtIfRxBadChecksums,
        tmnxOspfVirtIfBadAuthTypes,
        tmnxOspfVirtIfAuthFailures
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Virtual
         Interfaces on Nokia SROS series systems."
    ::= { tmnxOspfGroups 5 }

tmnxOspfNbrGroup                 OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNbrAddressType,
        tmnxOspfNbrAddress,
        tmnxOspfNbrOptions,
        tmnxOspfNbrPriority,
        tmnxOspfNbrState,
        tmnxOspfNbrHelloSuppressed,
        tmnxOspfNbrIfId,
        tmnxOspfNbrRestartHelperStatus,
        tmnxOspfNbrRestartHelperAge,
        tmnxOspfNbrRestartHelperExitRc,
        tmnxOspfNbrUpTime,
        tmnxOspfNbrLastEventTime,
        tmnxOspfNbrDeadTimeOutstanding,
        tmnxOspfNbrLastRestartTime,
        tmnxOspfNbrRestartReason,
        tmnxOspfNbrBfdTracking,
        tmnxOspfNbrDrId,
        tmnxOspfNbrBdrId,
        tmnxOspfNbrEvents,
        tmnxOspfNbrLsRetransQLen,
        tmnxOspfNbrBadNbrStates,
        tmnxOspfNbrLsaInstallFailed,
        tmnxOspfNbrBadSeqNums,
        tmnxOspfNbrBadMTUs,
        tmnxOspfNbrBadPackets,
        tmnxOspfNbrLsaNotInLsdbs,
        tmnxOspfNbrOptionMismatches,
        tmnxOspfNbrDuplicates,
        tmnxOspfNbrNumRestarts,
        tmnxOspfCfgNbrStatus,
        tmnxOspfCfgNbrStorageType,
        tmnxOspfCfgNbrLastChanged,
        tmnxOspfCfgNbrPriority,
        tmnxOspfCfgNbrRtrId,
        tmnxOspfCfgNbrState
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Neighbors on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 6 }

tmnxOspfVirtNbrGroup             OBJECT-GROUP
    OBJECTS     {
        tmnxOspfVirtNbrIfIndex,
        tmnxOspfVirtNbrIfInstId,
        tmnxOspfVirtNbrAddressType,
        tmnxOspfVirtNbrAddress,
        tmnxOspfVirtNbrOptions,
        tmnxOspfVirtNbrState,
        tmnxOspfVirtNbrHelloSuppressed,
        tmnxOspfVirtNbrIfId,
        tmnxOspfVirtNbrRestartHelperStatus,
        tmnxOspfVirtNbrRestartHelperAge,
        tmnxOspfVirtNbrRestartHelperExitRc,
        tmnxOspfVirtNbrUpTime,
        tmnxOspfVirtNbrLastEventTime,
        tmnxOspfVirtNbrDeadTmeOutstng,
        tmnxOspfVirtNbrLastRestartTime,
        tmnxOspfVirtNbrRestartReason,
        tmnxOspfVirtNbrEvents,
        tmnxOspfVirtNbrLsRetransQLen,
        tmnxOspfVirtNbrBadNbrStates,
        tmnxOspfVirtNbrLsaInstallFail,
        tmnxOspfVirtNbrBadSeqNums,
        tmnxOspfVirtNbrBadMTUs,
        tmnxOspfVirtNbrBadPackets,
        tmnxOspfVirtNbrLsaNotInLsdbs,
        tmnxOspfVirtNbrOptionMismatch,
        tmnxOspfVirtNbrDuplicates,
        tmnxOspfVirtNbrNumRestarts
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Virtual
         Neighbors on Nokia SROS series systems."
    ::= { tmnxOspfGroups 7 }

tmnxOspfAreaAggrGroup            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfAreaAggrStatus,
        tmnxOspfAreaAggrLastChanged,
        tmnxOspfAreaAggrEffect,
        tmnxOspfAreaAggrRouteTag
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Area Aggregates
         on Nokia SROS series systems."
    ::= { tmnxOspfGroups 8 }

tmnxOspfMD5KeyGroup              OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfMD5KeyStatus,
        tmnxOspfIfMD5KeyKey,
        tmnxOspfIfMD5KeyStartTime,
        tmnxOspfIfMD5KeyStopTime,
        tmnxOspfVirtIfMD5KeyStatus,
        tmnxOspfVirtIfMD5KeyKey,
        tmnxOspfVirtIfMD5KeyStartTime,
        tmnxOspfVirtIfMD5KeyStopTime
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF MD5 Keys on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 9 }

tmnxOspfNotifyObjsGroup          OBJECT-GROUP
    OBJECTS     {
        tmnxOspfSetTrap,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Notification
         Support Objects on Nokia SROS series systems."
    ::= { tmnxOspfGroups 10 }

tmnxOspfNotificationGroup        NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfVirtIfStateChange,
        tmnxOspfNbrStateChange,
        tmnxOspfVirtNbrStateChange,
        tmnxOspfIfConfigError,
        tmnxOspfVirtIfConfigError,
        tmnxOspfIfAuthFailure,
        tmnxOspfVirtIfAuthFailure,
        tmnxOspfIfRxBadPacket,
        tmnxOspfVirtIfRxBadPacket,
        tmnxOspfIfTxRetransmit,
        tmnxOspfVirtIfTxRetransmit,
        tmnxOspfAreaOriginateLsa,
        tmnxOspfAreaMaxAgeLsa,
        tmnxOspfLsdbOverflow,
        tmnxOspfLsdbApproachingOverflow,
        tmnxOspfIfStateChange,
        tmnxOspfNssaTranslatorStatusChg,
        tmnxOspfRestartStatusChange,
        tmnxOspfNbrRestartHlprStsChg,
        tmnxOspfVirtNbrRestartHlprStsChg,
        tmnxOspfSpfRunsStopped,
        tmnxOspfSpfRunsRestarted,
        tmnxOspfOverloadEntered,
        tmnxOspfOverloadExited,
        tmnxOspfAsOriginateLsa,
        tmnxOspfAsMaxAgeLsa,
        tmnxOspfLinkOriginateLsa,
        tmnxOspfLinkMaxAgeLsa
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting management of the OSPF
         Notifications on Nokia SROS series systems."
    ::= { tmnxOspfGroups 11 }

tmnxOspfGeneralV5v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfGeneralEntries,
        tmnxOspfGeneralLastChanged,
        tmnxOspfRouterId,
        tmnxOspfAdminState,
        tmnxOspfASBdrRtrStatus,
        tmnxOspfRFC1583Compatibility,
        tmnxOspfExtLsdbLimit,
        tmnxOspfMulticastExtensions,
        tmnxOspfExitOverflowInterval,
        tmnxOspfDemandExtensions,
        tmnxOspfReferenceBandwidth,
        tmnxOspfStrictLsaChecking,
        tmnxOspfRestartSupport,
        tmnxOspfRestartInterval,
        tmnxOspfPreference,
        tmnxOspfExternalPreference,
        tmnxOspfExportPolicy1,
        tmnxOspfExportPolicy2,
        tmnxOspfExportPolicy3,
        tmnxOspfExportPolicy4,
        tmnxOspfExportPolicy5,
        tmnxOspfManualSpfTrigger,
        tmnxOspfOverloadAdmState,
        tmnxOspfOverloadInterval,
        tmnxOspfBootOverloadAdmState,
        tmnxOspfBootOverloadInterval,
        tmnxOspfOverloadStubs,
        tmnxOspfSpfMaxWait,
        tmnxOspfSpfInitialWait,
        tmnxOspfSpfSecondWait,
        tmnxOspfLsaGenMaxWait,
        tmnxOspfLsaGenInitialWait,
        tmnxOspfLsaGenSecondWait,
        tmnxOspfLsaArrivalWait,
        tmnxOspfTESupport,
        tmnxOspfUnicastImport,
        tmnxOspfMulticastImport,
        tmnxOspfGREnable,
        tmnxOspfGRHelperMode,
        tmnxOspfAreaBdrRtrStatus,
        tmnxOspfBackBoneRouter,
        tmnxOspfStubRouterSupport,
        tmnxOspfAsScopeLsaCount,
        tmnxOspfAsScopeLsaCksumSum,
        tmnxOspfAsScopeUnkLsaCount,
        tmnxOspfAsScopeUnkLsaCksumSum,
        tmnxOspfExternLsaCount,
        tmnxOspfExternLsaCksumSum,
        tmnxOspfOpaqueLsaSupport,
        tmnxOspfRestartStatus,
        tmnxOspfRestartAge,
        tmnxOspfRestartExitRc,
        tmnxOspfDiscontinuityTime,
        tmnxOspfLastEnabledTime,
        tmnxOspfLastOvrflwEnteredTime,
        tmnxOspfLastOverflowExitTime,
        tmnxOspfInOverflowState,
        tmnxOspfOverloadOperState,
        tmnxOspfOverloadRemInterval,
        tmnxOspfLastOverloadEntrdTime,
        tmnxOspfLastOverloadExitTime,
        tmnxOspfLastOverloadEnterCode,
        tmnxOspfLastOverloadExitCode,
        tmnxOspfLastExtSpfRunTime,
        tmnxOspfLastFullSpfRunTime,
        tmnxOspfLastFullSpfInterval,
        tmnxOspfMaxSpfRunInterval,
        tmnxOspfMinSpfRunInterval,
        tmnxOspfAvgSpfRunInterval,
        tmnxOspfExtSpfRunInterval,
        tmnxOspfRoutesSubmitted,
        tmnxOspfOriginateNewLsas,
        tmnxOspfRxNewLsas,
        tmnxOspfFullSpfRuns,
        tmnxOspfExtSpfRuns,
        tmnxOspfIncremntlInterSpfRuns,
        tmnxOspfIncrementalExtSpfRuns,
        tmnxOspfSpfAttemptsFailed,
        tmnxOspfNumTimesInOverload,
        tmnxOspfNumTimesInOverflow,
        tmnxOspfRoutesAddsFailed,
        tmnxOspfRoutesDelsFailed,
        tmnxOspfRoutesModsFailed,
        tmnxOspfAreaEntries,
        tmnxOspfAreaLsaCountEntries,
        tmnxOspfAsLsdbEntries,
        tmnxOspfAreaLsdbEntries,
        tmnxOspfLinkLsdbEntries,
        tmnxOspfHostEntries,
        tmnxOspfIfEntries,
        tmnxOspfVirtIfEntries,
        tmnxOspfNbrEntries,
        tmnxOspfCfgNbrEntries,
        tmnxOspfVirtNbrEntries,
        tmnxOspfAreaAggrEntries,
        tmnxOspfIfMD5KeyEntries,
        tmnxOspfVirtIfMD5KeyEntries,
        tmnxOspfCSPFRequests,
        tmnxOspfCSPFDroppedRequests,
        tmnxOspfCSPFPathsFound,
        tmnxOspfCSPFPathsNotFound,
        tmnxOspfAreaTableChanged,
        tmnxOspfHostTableChanged,
        tmnxOspfIfTableChanged,
        tmnxOspfVirtIfTableChanged,
        tmnxOspfNbrTableChanged,
        tmnxOspfCfgNbrTableChanged,
        tmnxOspfVirtNbrTableChanged,
        tmnxOspfAreaAggTableChanged,
        tmnxOspfIfMD5KeyTableChanged,
        tmnxOspfVirtIfMD5KeyTableChanged,
        tmnxOspfRowStatus,
        tmnxOspfOperRouterId,
        tmnxOspfAsbrDomainId,
        tmnxOspfIgnoreDNBit,
        tmnxOspfSuppressDNBit
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 12 }

tmnxOspfIfV5v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfStatus,
        tmnxOspfIfLastChanged,
        tmnxOspfIfAreaId,
        tmnxOspfIfCfgType,
        tmnxOspfIfAdminState,
        tmnxOspfIfRtrPriority,
        tmnxOspfIfTransitDelay,
        tmnxOspfIfRetransInterval,
        tmnxOspfIfHelloInterval,
        tmnxOspfIfRtrDeadInterval,
        tmnxOspfIfPollInterval,
        tmnxOspfIfMulticastForwarding,
        tmnxOspfIfCfgMTU,
        tmnxOspfIfCfgMetric,
        tmnxOspfIfPassive,
        tmnxOspfIfAdvtSubnet,
        tmnxOspfIfDemand,
        tmnxOspfIfDemandNbrProbe,
        tmnxOspfIfDemandNbrProbeRetxLimit,
        tmnxOspfIfDemandNbrProbeInterval,
        tmnxOspfIfAuthType,
        tmnxOspfIfAuthKey,
        tmnxOspfIfState,
        tmnxOspfIfLastEnabledTime,
        tmnxOspfIfOperMTU,
        tmnxOspfIfMetricValue,
        tmnxOspfIfDRId,
        tmnxOspfIfDRIpAddrType,
        tmnxOspfIfDRIpAddr,
        tmnxOspfIfBDRId,
        tmnxOspfIfBDRIpAddrType,
        tmnxOspfIfBDRIpAddr,
        tmnxOspfIfLinkLsaCount,
        tmnxOspfIfLinkLsaCksumSum,
        tmnxOspfIfLinkUnkLsaCount,
        tmnxOspfIfLinkUnkLsaCksumSum,
        tmnxOspfIfMD5TransmitKeyId,
        tmnxOspfIfLocalIpAddressType,
        tmnxOspfIfLocalIpAddress,
        tmnxOspfIfMD5NumKeys,
        tmnxOspfIfType,
        tmnxOspfIfEnableBfd,
        tmnxOspfIfRemainDownOnFail,
        tmnxOspfIfEvents,
        tmnxOspfIfTxPackets,
        tmnxOspfIfTxHellos,
        tmnxOspfIfTxDBDs,
        tmnxOspfIfTxLSRs,
        tmnxOspfIfTxLSUs,
        tmnxOspfIfTxLSAcks,
        tmnxOspfIfRxPackets,
        tmnxOspfIfRxHellos,
        tmnxOspfIfRxDBDs,
        tmnxOspfIfRxLSRs,
        tmnxOspfIfRxLSUs,
        tmnxOspfIfRxLSAcks,
        tmnxOspfIfDiscardPackets,
        tmnxOspfIfRetransmitOuts,
        tmnxOspfIfBadVersions,
        tmnxOspfIfBadNetworks,
        tmnxOspfIfBadVirtualLinks,
        tmnxOspfIfBadAreas,
        tmnxOspfIfBadDstAddrs,
        tmnxOspfIfBadNeighbors,
        tmnxOspfIfBadPacketTypes,
        tmnxOspfIfNeighborCount,
        tmnxOspfIfLastEventTime,
        tmnxOspfIfBadLengths,
        tmnxOspfIfBadHelloIntervals,
        tmnxOspfIfBadDeadIntervals,
        tmnxOspfIfBadOptions,
        tmnxOspfIfRxBadChecksums,
        tmnxOspfIfBadAuthTypes,
        tmnxOspfIfAuthFailures
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 13 }

tmnxOspfIfV6v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfTeMetric,
        tmnxOspfIfTeState,
        tmnxOspfIfAdminGroup,
        tmnxOspfIfLdpSyncState,
        tmnxOspfIfLdpSyncMaxMetric,
        tmnxOspfIfLdpSyncTimerState,
        tmnxOspfIfLdpSyncTimeLeft
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         6.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 14 }

tmnxOspfGeneralV6v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfLdpSyncAdminState
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol 6.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 15 }

tmnxOspfNotificationV6v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfLdpSyncTimerStarted,
        tmnxOspfLdpSyncExit
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting management of the OSPF
         Notifications on 6.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 16 }

tmnxOspfNotifyObjsV6v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfIpName,
        tmnxOspfIfEvent
    }
    STATUS      current
    DESCRIPTION
        "The group of objects added in the 6.0 release to support OSPF
         notifications."
    ::= { tmnxOspfGroups 17 }

tmnxOspfGeneralV6v1Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfVpnDomainType,
        tmnxOspfVpnDomainId,
        tmnxOspfVpnTag,
        tmnxOspfSuperBackBone
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol 6.1
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 18 }

tmnxOspfShamLinksV7v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOspfShamIfStatus,
        tmnxOspfShamIfLastChanged,
        tmnxOspfShamIfAreaId,
        tmnxOspfShamIfAdminState,
        tmnxOspfShamIfTransitDelay,
        tmnxOspfShamIfRetransInterval,
        tmnxOspfShamIfHelloInterval,
        tmnxOspfShamIfRtrDeadInterval,
        tmnxOspfShamIfCfgMetric,
        tmnxOspfShamIfAuthType,
        tmnxOspfShamIfAuthKey,
        tmnxOspfShamIfState,
        tmnxOspfShamIfLastEnabledTime,
        tmnxOspfShamIfLinkLsaCount,
        tmnxOspfShamIfLinkLsaCksumSum,
        tmnxOspfShamIfLinkUnkLsaCount,
        tmnxOspfShamIfLinkUnkLsaCksumSum,
        tmnxOspfShamIfMD5TransmitKeyId,
        tmnxOspfShamIfLocalIpAddressType,
        tmnxOspfShamIfLocalIpAddress,
        tmnxOspfShamIfMD5NumKeys,
        tmnxOspfShamIfEvents,
        tmnxOspfShamIfTxPackets,
        tmnxOspfShamIfTxHellos,
        tmnxOspfShamIfTxDBDs,
        tmnxOspfShamIfTxLSRs,
        tmnxOspfShamIfTxLSUs,
        tmnxOspfShamIfTxLSAcks,
        tmnxOspfShamIfRxPackets,
        tmnxOspfShamIfRxHellos,
        tmnxOspfShamIfRxDBDs,
        tmnxOspfShamIfRxLSRs,
        tmnxOspfShamIfRxLSUs,
        tmnxOspfShamIfRxLSAcks,
        tmnxOspfShamIfDiscardPackets,
        tmnxOspfShamIfRetransmitOuts,
        tmnxOspfShamIfBadVersions,
        tmnxOspfShamIfBadNetworks,
        tmnxOspfShamIfBadAreas,
        tmnxOspfShamIfBadDstAddrs,
        tmnxOspfShamIfBadNeighbors,
        tmnxOspfShamIfBadPacketTypes,
        tmnxOspfShamIfLastEventTime,
        tmnxOspfShamIfBadLengths,
        tmnxOspfShamIfBadHelloIntervals,
        tmnxOspfShamIfBadDeadIntervals,
        tmnxOspfShamIfBadOptions,
        tmnxOspfShamIfRxBadChecksums,
        tmnxOspfShamIfBadAuthTypes,
        tmnxOspfShamIfAuthFailures,
        tmnxOspfShamIfMD5KeyStatus,
        tmnxOspfShamIfMD5KeyKey,
        tmnxOspfShamIfMD5KeyStartTime,
        tmnxOspfShamIfMD5KeyStopTime,
        tmnxOspfShamNbrOptions,
        tmnxOspfShamNbrState,
        tmnxOspfShamNbrHelloSuppressed,
        tmnxOspfShamNbrIfId,
        tmnxOspfShamNbrRestartHelperStatus,
        tmnxOspfShamNbrRestartHelperAge,
        tmnxOspfShamNbrRestartHelperExitRc,
        tmnxOspfShamNbrUpTime,
        tmnxOspfShamNbrLastEventTime,
        tmnxOspfShamNbrDeadTmeOutstng,
        tmnxOspfShamNbrLastRestartTime,
        tmnxOspfShamNbrRestartReason,
        tmnxOspfShamNbrEvents,
        tmnxOspfShamNbrLsRetransQLen,
        tmnxOspfShamNbrBadNbrStates,
        tmnxOspfShamNbrLsaInstallFail,
        tmnxOspfShamNbrBadSeqNums,
        tmnxOspfShamNbrBadMTUs,
        tmnxOspfShamNbrBadPackets,
        tmnxOspfShamNbrLsaNotInLsdbs,
        tmnxOspfShamNbrOptionMismatch,
        tmnxOspfShamNbrDuplicates,
        tmnxOspfShamNbrNumRestarts,
        tmnxOspfShamIfEntries,
        tmnxOspfShamNbrEntries,
        tmnxOspfShamIfMD5KeyEntries,
        tmnxOspfShamIfTableChanged,
        tmnxOspfShamNbrTableChanged,
        tmnxOspfShamIfMD5KeyTableChanged,
        tmnxOspfAreaShamLinkCount
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Sham Links
         feature on 7.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 19 }

tmnxOspfNotificationV7v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfShamIfStateChange,
        tmnxOspfShamNbrStateChange,
        tmnxOspfShamIfConfigError,
        tmnxOspfShamIfAuthFailure,
        tmnxOspfShamIfRxBadPacket,
        tmnxOspfShamIfTxRetransmit,
        tmnxOspfShamNbrRestartHlprStsChg,
        tmnxOspfFailureDisabled
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting management of the OSPF sham
         links Notifications on 7.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 20 }

tmnxOspfNotifyObjsV7v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOspfFailureReasonCode
    }
    STATUS      current
    DESCRIPTION
        "The group of objects added in the 7.0 release to support OSPF
         notifications."
    ::= { tmnxOspfGroups 21 }

tmnxOspfGeneralV7v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfLdpOverRsvp,
        tmnxOspfExportLimit,
        tmnxOspfExportLimitLogPercent,
        tmnxOspfTotalExportedRoutes
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 7.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 22 }

tmnxOspfGenNotificationV7v0Grp   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfExportLimitReached,
        tmnxOspfExportLimitWarning,
        tmnxOspfRoutesExpLmtDropped
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of the OSPF on 7.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 23 }

tmnxOspfAreaV8v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfAreaKeyRolloverInterval
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF Areas on 8.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 24 }

tmnxOspfVirtIfV8v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOspfVirtIfInboundSAName,
        tmnxOspfVirtIfOutboundSAName,
        tmnxOspfVirtIfOperInbSAName,
        tmnxOspfVirtIfOperInbSANameTemp,
        tmnxOspfVirtIfOperOutbSAName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Virtual
         Interfaces on release 8.0 Nokia SROS series systems."
    ::= { tmnxOspfGroups 25 }

tmnxOspfIfV8v0Group              OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfInboundSAName,
        tmnxOspfIfOutboundSAName,
        tmnxOspfIfOperInbSAName,
        tmnxOspfIfOperInbSANameTemp,
        tmnxOspfIfOperOutbSAName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         release 8.0 of Nokia SROS series systems."
    ::= { tmnxOspfGroups 26 }

tmnxOspfNotifyObjsV8v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOspfBadPacketErrType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects added in the 8.0 release to support OSPF
         notifications."
    ::= { tmnxOspfGroups 27 }

tmnxOspfGeneralV8v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfRsvpShortcut,
        tmnxOspfAdvertiseTunnelLink
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 8.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 28 }

tmnxOspfAreaV9v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfAreaStatus,
        tmnxOspfAreaLastChanged,
        tmnxOspfImportAsExtern,
        tmnxOspfAreaSummary,
        tmnxOspfAreaRangeBlackhole,
        tmnxOspfStubMetric,
        tmnxOspfAreaStubMetricType,
        tmnxOspfAreaOriginateDefault,
        tmnxOspfAreaNssaRedistribute,
        tmnxOspfAreaNssaTranslatorRole,
        tmnxOspfAreaNssaTranslatorStabInt,
        tmnxOspfAreaBdrRtrCount,
        tmnxOspfAreaAsBdrRtrCount,
        tmnxOspfAreaScopeLsaCount,
        tmnxOspfAreaScopeLsaCksumSum,
        tmnxOspfAreaScopeUnkLsaCount,
        tmnxOspfAreaScopeUnkLsaCksumSum,
        tmnxOspfAreaNssaTranslatorState,
        tmnxOspfAreaActiveInterfaces,
        tmnxOspfAreaInterfaceCount,
        tmnxOspfAreaVirtualLinkCount,
        tmnxOspfAreaLastSpfRunTime,
        tmnxOspfAreaSpfRuns,
        tmnxOspfAreaNssaTranslatorEvents,
        tmnxOspfAreaNeighborCount,
        tmnxOspfAreaLsaCountNumber,
        tmnxOspfAsLsdbSequence,
        tmnxOspfAsLsdbAge,
        tmnxOspfAsLsdbChecksum,
        tmnxOspfAsLsdbAdvertisement,
        tmnxOspfAsLsdbTypeKnown,
        tmnxOspfAreaLsdbSequence,
        tmnxOspfAreaLsdbAge,
        tmnxOspfAreaLsdbChecksum,
        tmnxOspfAreaLsdbAdvertisement,
        tmnxOspfAreaLsdbTypeKnown,
        tmnxOspfAreaKeyRolloverInterval
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Areas on Nokia
         SROS series systems."
    ::= { tmnxOspfGroups 29 }

tmnxOspfNgLinkLsdbV9v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgLinkLsdbSequence,
        tmnxOspfNgLinkLsdbAge,
        tmnxOspfNgLinkLsdbChecksum,
        tmnxOspfNgLinkLsdbAdvertisement,
        tmnxOspfNgLinkLsdbTypeKnown
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting Link-Scope Link State Advertisement
         database on Nokia SROS series systems from release 9.0."
    ::= { tmnxOspfGroups 30 }

tmnxOspfNgNbrV9v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgNbrAddressType,
        tmnxOspfNgNbrAddress,
        tmnxOspfNgNbrOptions,
        tmnxOspfNgNbrPriority,
        tmnxOspfNgNbrState,
        tmnxOspfNgNbrHelloSuppressed,
        tmnxOspfNgNbrIfId,
        tmnxOspfNgNbrRestartHelperStatus,
        tmnxOspfNgNbrRestartHelperAge,
        tmnxOspfNgNbrRestartHelperExitRc,
        tmnxOspfNgNbrUpTime,
        tmnxOspfNgNbrLastEventTime,
        tmnxOspfNgNbrDeadTimeOutstanding,
        tmnxOspfNgNbrLastRestartTime,
        tmnxOspfNgNbrRestartReason,
        tmnxOspfNgNbrBfdTracking,
        tmnxOspfNgNbrDrId,
        tmnxOspfNgNbrBdrId,
        tmnxOspfNgNbrEvents,
        tmnxOspfNgNbrLsRetransQLen,
        tmnxOspfNgNbrBadNbrStates,
        tmnxOspfNgNbrLsaInstallFailed,
        tmnxOspfNgNbrBadSeqNums,
        tmnxOspfNgNbrBadMTUs,
        tmnxOspfNgNbrBadPackets,
        tmnxOspfNgNbrLsaNotInLsdbs,
        tmnxOspfNgNbrOptionMismatches,
        tmnxOspfNgNbrDuplicates,
        tmnxOspfNgNbrNumRestarts,
        tmnxOspfCfgNbrLastChanged,
        tmnxOspfCfgNbrPriority,
        tmnxOspfCfgNbrRtrId,
        tmnxOspfCfgNbrState,
        tmnxOspfCfgNbrStatus,
        tmnxOspfCfgNbrStorageType
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Neighbors on
         Nokia SROS series systems from release 9.0."
    ::= { tmnxOspfGroups 31 }

tmnxOspfNgIfV9v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfStatus,
        tmnxOspfNgIfLastChanged,
        tmnxOspfNgIfCfgType,
        tmnxOspfNgIfAdminState,
        tmnxOspfNgIfRtrPriority,
        tmnxOspfNgIfTransitDelay,
        tmnxOspfNgIfRetransInterval,
        tmnxOspfNgIfHelloInterval,
        tmnxOspfNgIfRtrDeadInterval,
        tmnxOspfNgIfPollInterval,
        tmnxOspfNgIfCfgMTU,
        tmnxOspfNgIfCfgMetric,
        tmnxOspfNgIfPassive,
        tmnxOspfNgIfAdvtSubnet,
        tmnxOspfNgIfAuthType,
        tmnxOspfNgIfAuthKey,
        tmnxOspfNgIfEnableBfd,
        tmnxOspfNgIfRemainDownOnFail,
        tmnxOspfNgIfInboundSAName,
        tmnxOspfNgIfOutboundSAName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         Nokia SROS series systems from release 9.0."
    ::= { tmnxOspfGroups 32 }

tmnxOspfNgIfOperV9v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfState,
        tmnxOspfNgIfLastEnabledTime,
        tmnxOspfNgIfOperMTU,
        tmnxOspfNgIfMetricValue,
        tmnxOspfNgIfDRId,
        tmnxOspfNgIfDRIpAddrType,
        tmnxOspfNgIfDRIpAddr,
        tmnxOspfNgIfBDRId,
        tmnxOspfNgIfBDRIpAddrType,
        tmnxOspfNgIfBDRIpAddr,
        tmnxOspfNgIfLinkLsaCount,
        tmnxOspfNgIfLinkLsaCksumSum,
        tmnxOspfNgIfMD5TransmitKeyId,
        tmnxOspfNgIfLocalIpAddressType,
        tmnxOspfNgIfLocalIpAddress,
        tmnxOspfNgIfMD5NumKeys,
        tmnxOspfNgIfType,
        tmnxOspfNgIfTeMetric,
        tmnxOspfNgIfTeState,
        tmnxOspfNgIfAdminGroup,
        tmnxOspfNgIfLdpSyncState,
        tmnxOspfNgIfLdpSyncMaxMetric,
        tmnxOspfNgIfLdpSyncTimerState,
        tmnxOspfNgIfLdpSyncTimeLeft,
        tmnxOspfNgIfOperInbSAName,
        tmnxOspfNgIfOperInbSANameTemp,
        tmnxOspfNgIfOperOutbSAName
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         Nokia SROS series systems from release 9.0."
    ::= { tmnxOspfGroups 33 }

tmnxOspfNgIfStatsV9v0Group       OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfEvents,
        tmnxOspfNgIfTxPackets,
        tmnxOspfNgIfTxHellos,
        tmnxOspfNgIfTxDBDs,
        tmnxOspfNgIfTxLSRs,
        tmnxOspfNgIfTxLSUs,
        tmnxOspfNgIfTxLSAcks,
        tmnxOspfNgIfRxPackets,
        tmnxOspfNgIfRxHellos,
        tmnxOspfNgIfRxDBDs,
        tmnxOspfNgIfRxLSRs,
        tmnxOspfNgIfRxLSUs,
        tmnxOspfNgIfRxLSAcks,
        tmnxOspfNgIfDiscardPackets,
        tmnxOspfNgIfRetransmitOuts,
        tmnxOspfNgIfBadVersions,
        tmnxOspfNgIfBadNetworks,
        tmnxOspfNgIfBadVirtualLinks,
        tmnxOspfNgIfBadAreas,
        tmnxOspfNgIfBadDstAddrs,
        tmnxOspfNgIfBadNeighbors,
        tmnxOspfNgIfBadPacketTypes,
        tmnxOspfNgIfNeighborCount,
        tmnxOspfNgIfLastEventTime,
        tmnxOspfNgIfBadLengths,
        tmnxOspfNgIfBadHelloIntervals,
        tmnxOspfNgIfBadDeadIntervals,
        tmnxOspfNgIfBadOptions,
        tmnxOspfNgIfRxBadChecksums,
        tmnxOspfNgIfBadAuthTypes,
        tmnxOspfNgIfAuthFailures
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Interfaces on
         Nokia SROS series systems from release 9.0."
    ::= { tmnxOspfGroups 34 }

tmnxOspfMD5KeyV9v0Group          OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfMD5KeyStatus,
        tmnxOspfNgIfMD5KeyKey,
        tmnxOspfNgIfMD5KeyStartTime,
        tmnxOspfNgIfMD5KeyStopTime,
        tmnxOspfVirtIfMD5KeyStatus,
        tmnxOspfVirtIfMD5KeyKey,
        tmnxOspfVirtIfMD5KeyStartTime,
        tmnxOspfVirtIfMD5KeyStopTime
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting management of the OSPF MD5 Keys on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 35 }

tmnxOspfNotificationV9v0Group    NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfVirtIfStateChange,
        tmnxOspfNgNbrStateChange,
        tmnxOspfVirtNbrStateChange,
        tmnxOspfNgIfConfigError,
        tmnxOspfVirtIfConfigError,
        tmnxOspfNgIfAuthFailure,
        tmnxOspfVirtIfAuthFailure,
        tmnxOspfNgIfRxBadPacket,
        tmnxOspfVirtIfRxBadPacket,
        tmnxOspfNgIfTxRetransmit,
        tmnxOspfVirtIfTxRetransmit,
        tmnxOspfAreaOriginateLsa,
        tmnxOspfAreaMaxAgeLsa,
        tmnxOspfLsdbOverflow,
        tmnxOspfLsdbApproachingOverflow,
        tmnxOspfNgIfStateChange,
        tmnxOspfNssaTranslatorStatusChg,
        tmnxOspfRestartStatusChange,
        tmnxOspfNgNbrRestartHlprStsChg,
        tmnxOspfVirtNbrRestartHlprStsChg,
        tmnxOspfSpfRunsStopped,
        tmnxOspfSpfRunsRestarted,
        tmnxOspfOverloadEntered,
        tmnxOspfOverloadExited,
        tmnxOspfAsOriginateLsa,
        tmnxOspfAsMaxAgeLsa,
        tmnxOspfNgLinkOriginateLsa,
        tmnxOspfNgLinkMaxAgeLsa,
        tmnxOspfNgLdpSyncTimerStarted,
        tmnxOspfNgLdpSyncExit
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of notifications supporting management of the OSPF
         Notifications on Nokia SROS series systems."
    ::= { tmnxOspfGroups 36 }

tmnxOspfObsoletedObjV9v0Group    OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIfAdminGroup,
        tmnxOspfIfAdminState,
        tmnxOspfIfAdvtSubnet,
        tmnxOspfIfAreaId,
        tmnxOspfIfAuthFailures,
        tmnxOspfIfAuthKey,
        tmnxOspfIfAuthType,
        tmnxOspfIfBDRId,
        tmnxOspfIfBDRIpAddr,
        tmnxOspfIfBDRIpAddrType,
        tmnxOspfIfBadAreas,
        tmnxOspfIfBadAuthTypes,
        tmnxOspfIfBadDeadIntervals,
        tmnxOspfIfBadDstAddrs,
        tmnxOspfIfBadHelloIntervals,
        tmnxOspfIfBadLengths,
        tmnxOspfIfBadNeighbors,
        tmnxOspfIfBadNetworks,
        tmnxOspfIfBadOptions,
        tmnxOspfIfBadPacketTypes,
        tmnxOspfIfBadVersions,
        tmnxOspfIfBadVirtualLinks,
        tmnxOspfIfCfgMTU,
        tmnxOspfIfCfgMetric,
        tmnxOspfIfCfgType,
        tmnxOspfIfDRId,
        tmnxOspfIfDRIpAddr,
        tmnxOspfIfDRIpAddrType,
        tmnxOspfIfDemand,
        tmnxOspfIfDemandNbrProbe,
        tmnxOspfIfDemandNbrProbeInterval,
        tmnxOspfIfDemandNbrProbeRetxLimit,
        tmnxOspfIfDiscardPackets,
        tmnxOspfIfEnableBfd,
        tmnxOspfIfEvents,
        tmnxOspfIfHelloInterval,
        tmnxOspfIfInboundSAName,
        tmnxOspfIfLastChanged,
        tmnxOspfIfLastEnabledTime,
        tmnxOspfIfLastEventTime,
        tmnxOspfIfLdpSyncMaxMetric,
        tmnxOspfIfLdpSyncState,
        tmnxOspfIfLdpSyncTimeLeft,
        tmnxOspfIfLdpSyncTimerState,
        tmnxOspfIfLinkLsaCksumSum,
        tmnxOspfIfLinkLsaCount,
        tmnxOspfIfLinkUnkLsaCksumSum,
        tmnxOspfIfLinkUnkLsaCount,
        tmnxOspfIfLocalIpAddress,
        tmnxOspfIfLocalIpAddressType,
        tmnxOspfIfMD5KeyKey,
        tmnxOspfIfMD5KeyStartTime,
        tmnxOspfIfMD5KeyStatus,
        tmnxOspfIfMD5KeyStopTime,
        tmnxOspfIfMD5NumKeys,
        tmnxOspfIfMD5TransmitKeyId,
        tmnxOspfIfMetricValue,
        tmnxOspfIfMulticastForwarding,
        tmnxOspfIfNeighborCount,
        tmnxOspfIfOperInbSAName,
        tmnxOspfIfOperInbSANameTemp,
        tmnxOspfIfOperMTU,
        tmnxOspfIfOperOutbSAName,
        tmnxOspfIfOutboundSAName,
        tmnxOspfIfPassive,
        tmnxOspfIfPollInterval,
        tmnxOspfIfRemainDownOnFail,
        tmnxOspfIfRetransInterval,
        tmnxOspfIfRetransmitOuts,
        tmnxOspfIfRtrDeadInterval,
        tmnxOspfIfRtrPriority,
        tmnxOspfIfRxBadChecksums,
        tmnxOspfIfRxDBDs,
        tmnxOspfIfRxHellos,
        tmnxOspfIfRxLSAcks,
        tmnxOspfIfRxLSRs,
        tmnxOspfIfRxLSUs,
        tmnxOspfIfRxPackets,
        tmnxOspfIfState,
        tmnxOspfIfStatus,
        tmnxOspfIfTeMetric,
        tmnxOspfIfTeState,
        tmnxOspfIfTransitDelay,
        tmnxOspfIfTxDBDs,
        tmnxOspfIfTxHellos,
        tmnxOspfIfTxLSAcks,
        tmnxOspfIfTxLSRs,
        tmnxOspfIfTxLSUs,
        tmnxOspfIfTxPackets,
        tmnxOspfIfType,
        tmnxOspfLinkLsdbAdvertisement,
        tmnxOspfLinkLsdbAge,
        tmnxOspfLinkLsdbChecksum,
        tmnxOspfLinkLsdbSequence,
        tmnxOspfLinkLsdbTypeKnown,
        tmnxOspfNbrAddress,
        tmnxOspfNbrAddressType,
        tmnxOspfNbrBadMTUs,
        tmnxOspfNbrBadNbrStates,
        tmnxOspfNbrBadPackets,
        tmnxOspfNbrBadSeqNums,
        tmnxOspfNbrBdrId,
        tmnxOspfNbrBfdTracking,
        tmnxOspfNbrDeadTimeOutstanding,
        tmnxOspfNbrDrId,
        tmnxOspfNbrDuplicates,
        tmnxOspfNbrEvents,
        tmnxOspfNbrHelloSuppressed,
        tmnxOspfNbrIfId,
        tmnxOspfNbrLastEventTime,
        tmnxOspfNbrLastRestartTime,
        tmnxOspfNbrLsRetransQLen,
        tmnxOspfNbrLsaInstallFailed,
        tmnxOspfNbrLsaNotInLsdbs,
        tmnxOspfNbrNumRestarts,
        tmnxOspfNbrOptionMismatches,
        tmnxOspfNbrOptions,
        tmnxOspfNbrPriority,
        tmnxOspfNbrRestartHelperAge,
        tmnxOspfNbrRestartHelperExitRc,
        tmnxOspfNbrRestartHelperStatus,
        tmnxOspfNbrRestartReason,
        tmnxOspfNbrState,
        tmnxOspfNbrUpTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects no longer supported in version 9.0 of Nokia SROS
         series systems."
    ::= { tmnxOspfGroups 37 }

tmnxOspfGeneralV10v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfImportPolicy1,
        tmnxOspfImportPolicy2,
        tmnxOspfImportPolicy3,
        tmnxOspfImportPolicy4,
        tmnxOspfImportPolicy5
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 10.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 38 }

tmnxOspfFRRV10v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfLoopfreeAlternate,
        tmnxOspfAreaLoopfreeAltExclude,
        tmnxOspfNgIfLoopfreeAltExclude,
        tmnxOspfLfaSpfRuns,
        tmnxOspfLastLfaSpfRunTime,
        tmnxOspfLfaNodesCovered,
        tmnxOspfLfaTotalNodes,
        tmnxOspfLfaCoverage,
        tmnxOspfLfaPfxCovered,
        tmnxOspfLfaTotalPfx,
        tmnxOspfLfaPfxCoverage,
        tmnxOspfPathMetric,
        tmnxOspfPathLfaIfIndex,
        tmnxOspfPathLfaType,
        tmnxOspfPathLfaNhopRouterId,
        tmnxOspfPathLfaMetric
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the Fast Reroute feature
         for OSPF on 10.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 39 }

tmnxOspfFRRV11v0Group            OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfLsaFilterOut,
        tmnxOspfLsaAccumulate,
        tmnxOspfRedistDelay,
        tmnxOspfIncrSpfWait,
        tmnxOspfAreaNssaAdjCheck
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the Fast Reroute feature
         for OSPF on 11.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 40 }

tmnxOspfGeneralV11v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfPathNhOwner,
        tmnxOspfPathLfaNhOwner
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 11.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 41 }

tmnxOspfGeneralV12v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfGeneralExLastChanged,
        tmnxOspfAdvRtrCapability,
        tmnxOspfAreaAdvRtrCapability,
        tmnxOspfNgIfAdvRtrCapability,
        tmnxOspfNgIfAuthKeyChain,
        tmnxOspfVirtIfAuthKeyChain,
        tmnxOspfShamIfAuthKeyChain,
        tmnxOspfOverloadInclExt2,
        tmnxOspfLFAExcludePolicy1,
        tmnxOspfLFAExcludePolicy2,
        tmnxOspfLFAExcludePolicy3,
        tmnxOspfLFAExcludePolicy4,
        tmnxOspfLFAExcludePolicy5,
        tmnxOspfNgIfRouteNHTemplate
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 12.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 42 }

tmnxOspfGeneralV13v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfPriorityUpdate,
        tmnxOspfRibPriorityListHigh,
        tmnxOspfLdpOverRsvpStatus,
        tmnxOspfRsvpShortcutStatus,
        tmnxOspfAdvertiseTunlLinkStatus,
        tmnxOspfSrPfxSidFlags,
        tmnxOspfSrPfxSidActive,
        tmnxOspfStatsRlfaRuns,
        tmnxOspfStatsSidLabelRangeErrs,
        tmnxOspfStatsSidDupErrs,
        tmnxOspfNgIfSidType,
        tmnxOspfNgIfSidValue,
        tmnxOspfNgNbrSidType,
        tmnxOspfNgNbrSidValue,
        tmnxOspfPrefixSidRangeType,
        tmnxOspfPrefixSidRangeStartLabel,
        tmnxOspfPrefixSidRangeMaxIdx,
        tmnxOspfSrAdminState,
        tmnxOspfTunnelTablePreference,
        tmnxOspfRemoteLFA,
        tmnxOspfMaxPqCost,
        tmnxOspfTunnelMtu,
        tmnxOspfAdvRtrLsaLimit,
        tmnxOspfAdvRtrLsaLimitTimeout,
        tmnxOspfOvldLsaLimitRemInterval,
        tmnxOspfAdvRtrLsaLimitWarning,
        tmnxOspfAdvRtrLsaLimitLogOnly
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 13.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 43 }

tmnxOspfNotifyObjsV13v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNotifPfxSidRangeStartLbl,
        tmnxOspfNotifPfxSidRangeMaxIdx,
        tmnxOspfNotifPfxNhAdvRtr,
        tmnxOspfNotifyDescription,
        tmnxOspfNotifSrgbRangeStartLbl,
        tmnxOspfNotifSrgbRangeMaxIdx,
        tmnxOspfNotifSrgbAdvRtrID,
        tmnxOspfNotifSrgbAreaId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting OSPF notifications, added in the 13.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 44 }

tmnxOspfNotificationV13v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfSrSidError,
        tmnxOspfSrSidNotInLabelRange,
        tmnxOspfOverloadWarning,
        tmnxOspfRejectedAdjacencySid,
        tmnxOspfSrgbBadLabelRange
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF in the 13.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 45 }

tmnxOspfMD5KeyV13v0Group         OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfMD5KeyStatus,
        tmnxOspfNgIfMD5KeyKey,
        tmnxOspfVirtIfMD5KeyStatus,
        tmnxOspfVirtIfMD5KeyKey
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF MD5 Keys on
         Nokia SROS series systems."
    ::= { tmnxOspfGroups 46 }

tmnxOspfShamLinksV13v0Group      OBJECT-GROUP
    OBJECTS     {
        tmnxOspfShamIfStatus,
        tmnxOspfShamIfLastChanged,
        tmnxOspfShamIfAreaId,
        tmnxOspfShamIfAdminState,
        tmnxOspfShamIfTransitDelay,
        tmnxOspfShamIfRetransInterval,
        tmnxOspfShamIfHelloInterval,
        tmnxOspfShamIfRtrDeadInterval,
        tmnxOspfShamIfCfgMetric,
        tmnxOspfShamIfAuthType,
        tmnxOspfShamIfAuthKey,
        tmnxOspfShamIfState,
        tmnxOspfShamIfLastEnabledTime,
        tmnxOspfShamIfLinkLsaCount,
        tmnxOspfShamIfLinkLsaCksumSum,
        tmnxOspfShamIfLinkUnkLsaCount,
        tmnxOspfShamIfLinkUnkLsaCksumSum,
        tmnxOspfShamIfMD5TransmitKeyId,
        tmnxOspfShamIfLocalIpAddressType,
        tmnxOspfShamIfLocalIpAddress,
        tmnxOspfShamIfMD5NumKeys,
        tmnxOspfShamIfEvents,
        tmnxOspfShamIfTxPackets,
        tmnxOspfShamIfTxHellos,
        tmnxOspfShamIfTxDBDs,
        tmnxOspfShamIfTxLSRs,
        tmnxOspfShamIfTxLSUs,
        tmnxOspfShamIfTxLSAcks,
        tmnxOspfShamIfRxPackets,
        tmnxOspfShamIfRxHellos,
        tmnxOspfShamIfRxDBDs,
        tmnxOspfShamIfRxLSRs,
        tmnxOspfShamIfRxLSUs,
        tmnxOspfShamIfRxLSAcks,
        tmnxOspfShamIfDiscardPackets,
        tmnxOspfShamIfRetransmitOuts,
        tmnxOspfShamIfBadVersions,
        tmnxOspfShamIfBadNetworks,
        tmnxOspfShamIfBadAreas,
        tmnxOspfShamIfBadDstAddrs,
        tmnxOspfShamIfBadNeighbors,
        tmnxOspfShamIfBadPacketTypes,
        tmnxOspfShamIfLastEventTime,
        tmnxOspfShamIfBadLengths,
        tmnxOspfShamIfBadHelloIntervals,
        tmnxOspfShamIfBadDeadIntervals,
        tmnxOspfShamIfBadOptions,
        tmnxOspfShamIfRxBadChecksums,
        tmnxOspfShamIfBadAuthTypes,
        tmnxOspfShamIfAuthFailures,
        tmnxOspfShamIfMD5KeyStatus,
        tmnxOspfShamIfMD5KeyKey,
        tmnxOspfShamNbrOptions,
        tmnxOspfShamNbrState,
        tmnxOspfShamNbrHelloSuppressed,
        tmnxOspfShamNbrIfId,
        tmnxOspfShamNbrRestartHelperStatus,
        tmnxOspfShamNbrRestartHelperAge,
        tmnxOspfShamNbrRestartHelperExitRc,
        tmnxOspfShamNbrUpTime,
        tmnxOspfShamNbrLastEventTime,
        tmnxOspfShamNbrDeadTmeOutstng,
        tmnxOspfShamNbrLastRestartTime,
        tmnxOspfShamNbrRestartReason,
        tmnxOspfShamNbrEvents,
        tmnxOspfShamNbrLsRetransQLen,
        tmnxOspfShamNbrBadNbrStates,
        tmnxOspfShamNbrLsaInstallFail,
        tmnxOspfShamNbrBadSeqNums,
        tmnxOspfShamNbrBadMTUs,
        tmnxOspfShamNbrBadPackets,
        tmnxOspfShamNbrLsaNotInLsdbs,
        tmnxOspfShamNbrOptionMismatch,
        tmnxOspfShamNbrDuplicates,
        tmnxOspfShamNbrNumRestarts,
        tmnxOspfShamIfEntries,
        tmnxOspfShamNbrEntries,
        tmnxOspfShamIfMD5KeyEntries,
        tmnxOspfShamIfTableChanged,
        tmnxOspfShamNbrTableChanged,
        tmnxOspfShamIfMD5KeyTableChanged,
        tmnxOspfAreaShamLinkCount
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF Sham Links
         feature on Nokia SROS series systems."
    ::= { tmnxOspfGroups 47 }

tmnxOspfObsoletedObjV13v0Group   OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNgIfMD5KeyStartTime,
        tmnxOspfNgIfMD5KeyStopTime,
        tmnxOspfShamIfMD5KeyStartTime,
        tmnxOspfShamIfMD5KeyStopTime,
        tmnxOspfVirtIfMD5KeyStartTime,
        tmnxOspfVirtIfMD5KeyStopTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects no longer supported in version 13.0 of Nokia SROS
         series systems."
    ::= { tmnxOspfGroups 48 }

tmnxOspfNotifyObjsV12v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOspfBfdSessSetupFailReason
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting OSPF notifications, added in the 12.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 49 }

tmnxOspfNotificationV12v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfAdjBfdSessionSetupFail
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF in the 12.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 50 }

tmnxOspfSegmentRoutingTEGroup    OBJECT-GROUP
    OBJECTS     {
        tmnxOspfSrAdjSidHold,
        tmnxOspfDatabaseExport,
        tmnxOspfDbExportIdentifierSet,
        tmnxOspfDbExportIdentifierLow,
        tmnxOspfDbExportIdentifierHigh,
        tmnxOspfBgpLsIdentifierSet,
        tmnxOspfBgpLsIdentifier,
        tmnxOspfAreaDbExportExclude,
        tmnxOspfNgIfSidProtection
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OSPF segment routing TE
         on Nokia SROS series systems."
    ::= { tmnxOspfGroups 51 }

tmnxOspfGeneralV14v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfBackupNodeSidPfxType,
        tmnxOspfBackupNodeSidPfx,
        tmnxOspfBackupNodeSidPfxLen,
        tmnxOspfBackupNodeSidType,
        tmnxOspfBackupNodeSidValue,
        tmnxOspfDbAsn
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 14.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 52 }

tmnxOspfGeneralV15v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfExtendedLsa,
        tmnxOspfAreaExtendedLsa,
        tmnxOspfSrEntropyLabel,
        tmnxOspfOverrideTunnelElc,
        tmnxOspfTiLfa,
        tmnxOspfMaxSrFrrLabels,
        tmnxOspfAreaImportPolicy1,
        tmnxOspfAreaImportPolicy2,
        tmnxOspfAreaImportPolicy3,
        tmnxOspfAreaImportPolicy4,
        tmnxOspfAreaImportPolicy5,
        tmnxOspfAreaExportPolicy1,
        tmnxOspfAreaExportPolicy2,
        tmnxOspfAreaExportPolicy3,
        tmnxOspfAreaExportPolicy4,
        tmnxOspfAreaExportPolicy5,
        tmnxOspfAreaLsdbImportFltrd,
        tmnxOspfAreaLsdbExportFltrd,
        tmnxOspfOperState,
        tmnxOspfSrLfaStatsTotalSid,
        tmnxOspfSrLfaStatsLfaCovered,
        tmnxOspfSrLfaStatsRLfaCovered,
        tmnxOspfSrLfaStatsTiLfaCovered,
        tmnxOspfStatsTiLfaRuns,
        tmnxOspfNgIfSidClearNFlag,
        tmnxOspfNgIfAdjSidType,
        tmnxOspfNgIfAdjSidValue
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 15.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 53 }

tmnxOspfIgpSC15v0Group           OBJECT-GROUP
    OBJECTS     {
        tmnxOspfIgpSCAdminState,
        tmnxOspfIgpSCTunnNextHopLstCh,
        tmnxOspfIgpSCTNHResolution,
        tmnxOspfIgpSCTNHResFilterRsvp,
        tmnxOspfIgpSCTNHResFilterSrTe
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of OSPF IGP shortcut added
         in the 15.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 54 }

tmnxOspfObsolete15v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfRsvpShortcut
    }
    STATUS      current
    DESCRIPTION
        "The group of objects in TIMETRA-OSPF-NG-MIB which are obsoleted."
    ::= { tmnxOspfGroups 55 }

tmnxOspfObsolete16v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfCfgNbrStorageType,
        tmnxOspfSrPfxSidActive
    }
    STATUS      current
    DESCRIPTION
        "The group of objects no longer supported in version 16.0 of Nokia SROS
         series systems."
    ::= { tmnxOspfGroups 56 }

tmnxOspfGeneralV16v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfSrMsAdminState,
        tmnxOspfAdjSetRowStatus,
        tmnxOspfAdjSetLastChanged,
        tmnxOspfAdjSetSidType,
        tmnxOspfAdjSetSidValue,
        tmnxOspfAdjSetParallel,
        tmnxOspfAdjSetAdvertise,
        tmnxOspfAdjSetDynSidValue,
        tmnxOspfAdjSetTunlDestType,
        tmnxOspfAdjSetTunlDestIp,
        tmnxOspfAdjSetNbrRtrId,
        tmnxOspfAdjSetMembersCount,
        tmnxOspfAdjSetActiveMembers,
        tmnxOspfAdjSetUpTime,
        tmnxOspfAdjSetStatus,
        tmnxOspfAdjSetMtu,
        tmnxOspfIfAdjSetRowStatus,
        tmnxOspfIfAdjSetLastChanged,
        tmnxOspfAdjSetNhopType,
        tmnxOspfAdjSetNhop,
        tmnxOspfSrlbReservedLblBlockName,
        tmnxOspfSrExportTunnelTableProt,
        tmnxOspfSRMSSidMapRowStatus,
        tmnxOspfSRMSSidMapLastCh,
        tmnxOspfSRMSSidMapPrefixType,
        tmnxOspfSRMSSidMapPrefix,
        tmnxOspfSRMSSidMapPrefixLength,
        tmnxOspfSRMSSidMapNodeSidRange,
        tmnxOspfSRMSSidMapScope,
        tmnxOspfSRMSSidMapScopeArea,
        tmnxOspfSrPfxSidSRMS,
        tmnxOspfSrPfxSidSRMSSelected,
        tmnxOspfRemoteLfaNodeProtect,
        tmnxOspfRemoteLfaMaxPqNodes,
        tmnxOspfTiLfaNodeProtect
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 16.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 57 }

tmnxOspfNotifyObjsV16v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNotifyIfIndex,
        tmnxOspfNotifyNbrRouterId
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting OSPF notifications, added in the 16.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 58 }

tmnxOspfNotificationV16v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfRejectedAdjacencySet
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF in the 16.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 59 }

tmnxOspfGeneralV19v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfMultiInstance,
        tmnxOspfReferenceBandwidthU64Hi,
        tmnxOspfReferenceBandwidthU64Lo,
        tmnxOspfNgIfLBAdminWeight,
        tmnxOspfEgressStatsNodeSid,
        tmnxOspfEgressStatsAdjSid,
        tmnxOspfEgressStatsAdjSet,
        tmnxOspfIngressStatsNodeSid,
        tmnxOspfIngressStatsAdjSid,
        tmnxOspfIngressStatsAdjSet,
        tmnxOspfOverloadInclExt1,
        tmnxOspfSidStatsSidType,
        tmnxOspfSidStatsPrefixType,
        tmnxOspfSidStatsPrefix,
        tmnxOspfSidStatsPrefixLength,
        tmnxOspfSidStatsIfIndex,
        tmnxOspfSidStatsAdjSet,
        tmnxOspfSidStatsIngressOperState,
        tmnxOspfSidStatsIngressOctets,
        tmnxOspfSidStatsIngressPackets,
        tmnxOspfSidStatsEgressOperState,
        tmnxOspfSidStatsEgressOctets,
        tmnxOspfSidStatsEgressPackets,
        tmnxOspfAreaAdvertiseNeProfile,
        tmnxOspfHostnameName,
        tmnxOspfScalarDynHostnames
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 19.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 60 }

tmnxOspfObsolete19v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfDiscontinuityTime
    }
    STATUS      current
    DESCRIPTION
        "The group of objects in TIMETRA-OSPF-NG-MIB which are obsoleted."
    ::= { tmnxOspfGroups 61 }

tmnxOspfNotifyObjsV19v0Group     OBJECT-GROUP
    OBJECTS     {
        tmnxOspfNotifStatsIndexStatus
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting OSPF notifications, added in the 19.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 62 }

tmnxOspfNotificationV19v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfSidStatsIndexAlloc,
        tmnxOspfDynHostnameDuplicate,
        tmnxOspfDynHostnameInconsistent
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF in the 19.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 63 }

tmnxOspfNetworkElementV16v0Group OBJECT-GROUP
    OBJECTS     {
        tmnxOspfAreaAdvertiseNeProfile
    }
    STATUS      obsolete
    DESCRIPTION
        "The group of objects supporting Network Element Discovery added in the
         16.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 64 }

tmnxOspfGeneralV20v0Group        OBJECT-GROUP
    OBJECTS     {
        tmnxOspfSrLastChanged,
        tmnxOspfSrMsdOverrideBmi,
        tmnxOspfSrMsdOverrideErld
    }
    STATUS      current
    DESCRIPTION
        "The group of objects supporting management of the OSPF protocol added
         in the 20.0 release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 65 }

tmnxOspfNotificationV20v0Group   NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfShamIfStateChange,
        tmnxOspfShamNbrStateChange,
        tmnxOspfShamIfConfigError,
        tmnxOspfShamIfAuthFailure,
        tmnxOspfShamIfRxBadPacket,
        tmnxOspfShamNbrRestartHlprStsChg,
        tmnxOspfFailureDisabled,
        tmnxOspfVirtIfStateChange,
        tmnxOspfNgNbrStateChange,
        tmnxOspfVirtNbrStateChange,
        tmnxOspfNgIfConfigError,
        tmnxOspfVirtIfConfigError,
        tmnxOspfNgIfAuthFailure,
        tmnxOspfVirtIfAuthFailure,
        tmnxOspfNgIfRxBadPacket,
        tmnxOspfVirtIfRxBadPacket,
        tmnxOspfAreaOriginateLsa,
        tmnxOspfAreaMaxAgeLsa,
        tmnxOspfLsdbOverflow,
        tmnxOspfLsdbApproachingOverflow,
        tmnxOspfNgIfStateChange,
        tmnxOspfNssaTranslatorStatusChg,
        tmnxOspfRestartStatusChange,
        tmnxOspfNgNbrRestartHlprStsChg,
        tmnxOspfVirtNbrRestartHlprStsChg,
        tmnxOspfSpfRunsStopped,
        tmnxOspfSpfRunsRestarted,
        tmnxOspfOverloadEntered,
        tmnxOspfOverloadExited,
        tmnxOspfAsOriginateLsa,
        tmnxOspfAsMaxAgeLsa,
        tmnxOspfNgLinkOriginateLsa,
        tmnxOspfNgLinkMaxAgeLsa,
        tmnxOspfNgLdpSyncTimerStarted,
        tmnxOspfNgLdpSyncExit
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF on 20.0
         release of Nokia SROS series systems."
    ::= { tmnxOspfGroups 66 }

tmnxOspfObsoletedNotifV20v0Group NOTIFICATION-GROUP
    NOTIFICATIONS {
        tmnxOspfVirtIfTxRetransmit,
        tmnxOspfShamIfTxRetransmit,
        tmnxOspfNgIfTxRetransmit
    }
    STATUS      current
    DESCRIPTION
        "The group of notifications supporting management of OSPF on 20.0
         release of Nokia SROS series systems which are obsoleted."
    ::= { tmnxOspfGroups 67 }

tmnxOspfNotifyPrefix             OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 36 }

tmnxOspfNotifications            OBJECT IDENTIFIER ::= { tmnxOspfNotifyPrefix 0 }

tmnxOspfVirtIfStateChange        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfVirtIfState
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfVirtIfStateChange notification is generated when there has
         been a change in the state of an OSPF virtual interface.

         This notification should be generated when the interface state
         regresses (e.g., goes from Point-to-Point to Down) or progresses to a
         terminal state (i.e., Point-to-Point)."
    ::= { tmnxOspfNotifications 1 }

tmnxOspfNbrStateChange           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNbrState
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgNbrStateChange."
    ::= { tmnxOspfNotifications 2 }

tmnxOspfVirtNbrStateChange       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfVirtNbrState
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfVirtNbrStateChange notification is generated when there has
         been a change in the state of an OSPF virtual neighbor. This
         notification should be generated when the neighbor state regresses
         (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a
         terminal state (e.g., Full)."
    ::= { tmnxOspfNotifications 3 }

tmnxOspfIfConfigError            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfIfRxPackets
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfConfigError."
    ::= { tmnxOspfNotifications 4 }

tmnxOspfVirtIfConfigError        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfVirtIfRxPackets
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfVirtIfConfigError notification is generated when a
         packet has been received on a virtual interface from a router whose
         configuration parameters conflict with this router's configuration
         parameters.  Note that the event 'optionMismatch' should cause a
         notification only if it prevents an adjacency from forming."
    ::= { tmnxOspfNotifications 5 }

tmnxOspfIfAuthFailure            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfIfAuthFailures
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfAuthFailure."
    ::= { tmnxOspfNotifications 6 }

tmnxOspfVirtIfAuthFailure        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfVirtIfAuthFailures
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfVirtIfAuthFailure notification is generated when a packet
         has been received on a virtual interface from a router whose
         authentication key or authentication type conflicts with this router's
         authentication key or authentication type."
    ::= { tmnxOspfNotifications 7 }

tmnxOspfIfRxBadPacket            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfPacketType,
        tmnxOspfIfBadPacketTypes,
        tmnxOspfBadPacketErrType
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfRxBadPacket."
    ::= { tmnxOspfNotifications 8 }

tmnxOspfVirtIfRxBadPacket        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfPacketType,
        tmnxOspfVirtIfBadPacketTypes,
        tmnxOspfBadPacketErrType
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfVirtIfRxBadPacket notification is generated when an OSPF
         packet that cannot be parsed has been received on a virtual interface."
    ::= { tmnxOspfNotifications 9 }

tmnxOspfIfTxRetransmit           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketType,
        tmnxOspfNbrLsRetransQLen
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfTxRetransmit."
    ::= { tmnxOspfNotifications 10 }

tmnxOspfVirtIfTxRetransmit       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketType,
        tmnxOspfVirtNbrLsRetransQLen
    }
    STATUS      obsolete
    DESCRIPTION
        "A tmnxOspfVirtIfTxRetransmit notification is generated when an OSPF
         packet has been retransmitted on a virtual interface."
    ::= { tmnxOspfNotifications 11 }

tmnxOspfAreaOriginateLsa         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfAreaLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfAreaOriginateLsa notification is generated when a new
         LSA has been originated by this router.  This notification should
         not be invoked for simple refreshes of LSAs (which happens every
         30 minutes), but instead will only be invoked when an LSA is
         (re)originated due to a topology change.  Additionally, this
         notification does not include LSAs that are  being flushed because
         they have reached 'MaxAge'."
    ::= { tmnxOspfNotifications 12 }

tmnxOspfAreaMaxAgeLsa            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfAreaLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfAreaMaxAgeLsa notification is generated when one of the area
         scope LSAs in the router's link-state database has aged  to 'MaxAge'."
    ::= { tmnxOspfNotifications 13 }

tmnxOspfLsdbOverflow             NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfExtLsdbLimit
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfLsdbOverflow notification is generated when the number of
         LSAs in the router's link-state database has exceeded limit indicated
         by tmnxOspfExtLsdbLimit."
    ::= { tmnxOspfNotifications 14 }

tmnxOspfLsdbApproachingOverflow  NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfExtLsdbLimit
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfLsdbApproachingOverflow notification is generated when the
         number of LSAs in the router's link-state database has exceeded ninety
         percent of the value indicated by tmnxOspfExtLsdbLimit."
    ::= { tmnxOspfNotifications 15 }

tmnxOspfIfStateChange            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfIfState,
        tmnxOspfIfIpName,
        tmnxOspfIfEvent
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgIfStateChange."
    ::= { tmnxOspfNotifications 16 }

tmnxOspfNssaTranslatorStatusChg  NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfAreaNssaTranslatorState
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNssaTranslatorStatusChg notification is generated
         when there has been a change in the router's ability to translate
         OSPF type-7 LSAs into OSPF type-5 LSAs.  This notification should be
         generated when the Translator Status transitions from or to any
         defined status on a per area basis."
    ::= { tmnxOspfNotifications 17 }

tmnxOspfRestartStatusChange      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfRestartStatus,
        tmnxOspfRestartInterval,
        tmnxOspfRestartExitRc
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfRestartStatusChange notification is generated when
         there has been a change in the graceful restart state for the
         router.  This notification should be generated when the router
         restart status changes."
    ::= { tmnxOspfNotifications 18 }

tmnxOspfNbrRestartHlprStsChg     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNbrRestartHelperStatus,
        tmnxOspfNbrRestartHelperAge,
        tmnxOspfNbrRestartHelperExitRc
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgNbrRestartHlprStsChg."
    ::= { tmnxOspfNotifications 19 }

tmnxOspfVirtNbrRestartHlprStsChg NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfVirtNbrRestartHelperStatus,
        tmnxOspfVirtNbrRestartHelperAge,
        tmnxOspfVirtNbrRestartHelperExitRc
    }
    STATUS      current
    DESCRIPTION
        "An tmnxOspfVirtNbrRestartHlprStsChg notification is
         generated when there has been a change in the graceful restart
         helper state for the virtual neighbor.  This notification should
         be generated when the virtual neighbor restart helper status
         transitions for a virtual neighbor."
    ::= { tmnxOspfNotifications 20 }

tmnxOspfSpfRunsStopped           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfSpfRunsStopped trap signifies that there are insufficient
         memory resources on the system to run the SPF to completion.
         Consequently, OSPF will stop running SPFs until enough memory
         resources become available."
    ::= { tmnxOspfNotifications 21 }

tmnxOspfSpfRunsRestarted         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfSpfRunsRestarted trap signifies that there are sufficient
         memory resources on the system to start running the SPF to completion.
         Consequently, OSPF will resume running the SPFs as required."
    ::= { tmnxOspfNotifications 22 }

tmnxOspfOverloadEntered          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfLastOverloadEnterCode,
        tmnxOspfNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfOverloadEntered trap is sent out when OSPF enters the
         overload state. tmnxOspfLastOverloadEnterCode holds the condition
         which caused OSPF to get into overload"
    ::= { tmnxOspfNotifications 23 }

tmnxOspfOverloadExited           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfLastOverloadExitCode
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfOverloadExited trap is sent out when OSPF exits the overload
         state. tmnxOspfLastOverloadExitCode holds the condition which caused
         OSPF to get out of overload"
    ::= { tmnxOspfNotifications 24 }

tmnxOspfAsOriginateLsa           NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfAsLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfAsOriginateLsa notification is generated when a new
         LSA has been originated by this router.  This notification should
         not be invoked for simple refreshes of LSAs (which happens every
         30 minutes), but instead will only be invoked when an LSA is
         (re)originated due to a topology change.  Additionally, this
         notification does not include LSAs that are  being flushed because
         they have reached 'MaxAge'."
    ::= { tmnxOspfNotifications 25 }

tmnxOspfAsMaxAgeLsa              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfAsLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfAsMaxAgeLsa notification is generated when one of the
         autonomous system scope LSAs in the router's link-state database has
         aged to 'MaxAge'."
    ::= { tmnxOspfNotifications 26 }

tmnxOspfLinkOriginateLsa         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfLinkLsdbAge
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgLinkOriginateLsa."
    ::= { tmnxOspfNotifications 27 }

tmnxOspfLinkMaxAgeLsa            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfLinkLsdbAge
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgLinkMaxAgeLsa."
    ::= { tmnxOspfNotifications 28 }

tmnxOspfLdpSyncTimerStarted      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfIfLdpSyncTimerState
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgLdpSyncTimerStarted."
    ::= { tmnxOspfNotifications 29 }

tmnxOspfLdpSyncExit              NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfIfLdpSyncTimerState
    }
    STATUS      obsolete
    DESCRIPTION
        "This notification is obsoleted in release 9.0. It is replaced with
         tmnxOspfNgLdpSyncExit."
    ::= { tmnxOspfNotifications 30 }

tmnxOspfShamIfStateChange        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfShamIfState
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamIfStateChange notification is generated when
         there has been a change in the state of an OSPF sham link.

         This notification should be generated when the interface state
         regresses (e.g., goes from Point-to-Point to Down) or progresses to a
         terminal state (i.e., Point-to-Point). [EFFECT] The state of an OSPF
         sham link changed. [RECOVERY] Investigate why the state changed if it
         was not intentional."
    ::= { tmnxOspfNotifications 31 }

tmnxOspfShamNbrStateChange       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfShamNbrState
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamNbrStateChange notification is generated when
         there has been a change in the state of an OSPF sham link neighbor.
         This notification should be generated when the neighbor state
         regresses (e.g., goes from Attempt or Full to 1-Way or Down) or
         progresses to a terminal state (e.g., Full). [EFFECT] There has been a
         change in the state of an OSPF sham link neighbor. [RECOVERY] N/A"
    ::= { tmnxOspfNotifications 32 }

tmnxOspfShamIfConfigError        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfShamIfRxPackets
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamIfConfigError notification is generated when a
         packet has been received on a sham link from a router whose
         configuration parameters conflict with this router's configuration
         parameters.  Note that the event 'optionMismatch' should cause a
         notification only if it prevents an adjacency from forming.
         [EFFECT] No OSPF adjacency is formed.
         [RECOVERY] Correct conflicting OSPF configuration parameters."
    ::= { tmnxOspfNotifications 33 }

tmnxOspfShamIfAuthFailure        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfShamIfAuthFailures
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamIfAuthFailure notification is generated when a
         packet has been received on a sham link from a router whose
         authentication key or authentication type conflicts with this router's
         authentication key or authentication type. [EFFECT] The packet is
         discarded. [RECOVERY] Correct authentication configuration in this
         router  or in the other router."
    ::= { tmnxOspfNotifications 34 }

tmnxOspfShamIfRxBadPacket        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfPacketType,
        tmnxOspfShamIfBadPacketTypes,
        tmnxOspfBadPacketErrType
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamIfRxBadPacket notification is generated when an
         OSPF packet that cannot be parsed has been received on a sham link.
         [EFFECT] The OSPF packet is dropped. [RECOVERY] Resolve root cause why
         packet could not be parsed by OSPF. The necessary action depends on
         tmnxOspfBadPacketErrType."
    ::= { tmnxOspfNotifications 35 }

tmnxOspfShamIfTxRetransmit       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketType,
        tmnxOspfShamNbrLsRetransQLen
    }
    STATUS      obsolete
    DESCRIPTION
        "[CAUSE] A tmnxOspfShamIfTxRetransmit notification is generated when an
         OSPF packet has been retransmitted on a sham link. [EFFECT] The OSPF
         packet is retransmitted on a sham link. [RECOVERY] N/A"
    ::= { tmnxOspfNotifications 36 }

tmnxOspfShamNbrRestartHlprStsChg NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfShamNbrRestartHelperStatus,
        tmnxOspfShamNbrRestartHelperAge,
        tmnxOspfShamNbrRestartHelperExitRc
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] An tmnxOspfShamNbrRestartHlprStsChg notification is
         generated when there has been a change in the graceful restart
         helper state for the sham link neighbor.  This notification should
         be generated when the sham link neighbor restart helper status
         transitions for a sham link neighbor.
         [EFFECT] Notifies a change in the graceful restart helper state for
         the sham link neighbor.
         [RECOVERY] N/A"
    ::= { tmnxOspfNotifications 37 }

tmnxOspfFailureDisabled          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfFailureReasonCode
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] A tmnxOspfFailureDisabled notification is generated when OSPF
         is operationally brought down due to an operational problem.  Reason
         for the failure is indicated by tmnxOspfFailureReasonCode. [EFFECT]
         OSPF is going in shutdown. [RECOVERY] After 30 seconds, OSPF will
         autonomously start up. If the operational problem is still there then
         it will shutdown again."
    ::= { tmnxOspfNotifications 38 }

tmnxOspfExportLimitReached       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfExportLimit
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfExportLimitReached notification is generated when the
         configured value of exported routes, tmnxOspfExportLimit is reached.
         Additional routes would not be exported into OSPF or OSPF3 from the
         route table."
    ::= { tmnxOspfNotifications 39 }

tmnxOspfExportLimitWarning       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfExportLimit,
        tmnxOspfExportLimitLogPercent
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfExportLimitWarning notification is generated when the number
         of exported routes is equal to the configured percent,
         tmnxOspfExportLimitLogPercent of the export limit,
         tmnxOspfExportLimit. Additional routes will continue to be exported
         into OSPF or OSPF3 from the route table till the export limit is
         reached."
    ::= { tmnxOspfNotifications 40 }

tmnxOspfRoutesExpLmtDropped      NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfExportLimit
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfRoutesExpLmtDropped notification is generated when the
         number of exported routes drops below the export limit,
         tmnxOspfExportLimit."
    ::= { tmnxOspfNotifications 41 }

tmnxOspfNgNbrStateChange         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgNbrState
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgNbrStateChange notification is generated when there has
         been a change in the state of a non-virtual OSPF neighbor. This
         notification should be generated when the neighbor state regresses
         (e.g., goes from Attempt or Full to 1-Way or Down) or progresses
         to a terminal state (e.g., 2-Way or Full). When a neighbor
         transitions from or to Full on non-broadcast multi-access and
         broadcast networks, the notification should be generated by the
         designated router.  A designated router transitioning to Down will
         be noted by the tmnxOspfNgIfStateChange notification."
    ::= { tmnxOspfNotifications 42 }

tmnxOspfNgIfConfigError          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfNgIfRxPackets
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgIfConfigError notification is generated when a packet has
         been received on a non-virtual interface from a router whose
         configuration parameters conflict with this router's configuration
         parameters.  Note that the event 'optionMismatch' should cause a
         notification only if it prevents an adjacency from forming."
    ::= { tmnxOspfNotifications 43 }

tmnxOspfNgIfAuthFailure          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfConfigErrorType,
        tmnxOspfPacketType,
        tmnxOspfNgIfAuthFailures
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgIfAuthFailure notification is generated when a packet has
         been received on a non-virtual interface from a router whose
         authentication key or authentication type conflicts with this router's
         authentication key or authentication type."
    ::= { tmnxOspfNotifications 44 }

tmnxOspfNgIfRxBadPacket          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketSrcAddressType,
        tmnxOspfPacketSrcAddress,
        tmnxOspfPacketType,
        tmnxOspfNgIfBadPacketTypes,
        tmnxOspfBadPacketErrType
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgIfRxBadPacket notification is generated when an OSPF
         packet that cannot be parsed has been received on a non-virtual
         interface."
    ::= { tmnxOspfNotifications 45 }

tmnxOspfNgIfTxRetransmit         NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfPacketType,
        tmnxOspfNgNbrLsRetransQLen
    }
    STATUS      obsolete
    DESCRIPTION
        "A tmnxOspfNgIfTxRetransmit notification is generated when an OSPF
         packet has been retransmitted on a non-virtual interface."
    ::= { tmnxOspfNotifications 46 }

tmnxOspfNgIfStateChange          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgIfState,
        tmnxOspfIfIpName,
        tmnxOspfIfEvent
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgIfStateChange notification is generated when there
         has been a change in the state of a non-virtual OSPF interface.
         This notification should be generated when the interface state
         regresses (e.g., goes from Dr to Down) or progresses to a terminal
         state  (i.e., Point-to-Point, DR Other, Dr, or Backup)."
    ::= { tmnxOspfNotifications 47 }

tmnxOspfNgNbrRestartHlprStsChg   NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgNbrRestartHelperStatus,
        tmnxOspfNgNbrRestartHelperAge,
        tmnxOspfNgNbrRestartHelperExitRc
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgNbrRestartHlprStsChg notification is generated
         when there has been a change in the graceful restart helper state
         for the neighbor.  This notification should be generated when the
         neighbor restart helper status transitions for a neighbor."
    ::= { tmnxOspfNotifications 48 }

tmnxOspfNgLinkOriginateLsa       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgLinkLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgLinkOriginateLsa notification is generated when a new
         LSA has been originated by this router.  This notification should
         not be invoked for simple refreshes of LSAs (which happens every
         30 minutes), but instead will only be invoked when an LSA is
         (re)originated due to a topology change.  Additionally, this
         notification does not include LSAs that are  being flushed because
         they have reached 'MaxAge'."
    ::= { tmnxOspfNotifications 49 }

tmnxOspfNgLinkMaxAgeLsa          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgLinkLsdbAge
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfNgLinkMaxAgeLsa notification is generated when one of the
         LSAs in the router's link-state database has aged to 'MaxAge'."
    ::= { tmnxOspfNotifications 50 }

tmnxOspfNgLdpSyncTimerStarted    NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgIfLdpSyncTimerState
    }
    STATUS      current
    DESCRIPTION
        "A notification sent when the tmnxOspfNgIfLdpSyncTimerState is started.
         The timer is started from the time the LDP session to the neighbor is
         up over the interface. This is to allow for the label FEC bindings to
         be exchanged."
    ::= { tmnxOspfNotifications 51 }

tmnxOspfNgLdpSyncExit            NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNgIfLdpSyncTimerState
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] When IGP-LDP synchronization is configured on an interface
         then the interface is initially announced with maximum metric in  the
         router LSA. This notification is sent when IGP-LDP synchronization
         finishes, that is when tmnxOspfNgIfLdpSyncTimerState changes to a
         state  higher than timerActive.  [EFFECT] The IGP link metric is
         restored to normal level. [RECOVERY] N/A"
    ::= { tmnxOspfNotifications 52 }

tmnxOspfSrSidError               NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfSrPfxSidFlags,
        tmnxOspfNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] This notification is generated when OSPF receives an IOM or
         CPM failure (system exhausted ILM, NHLFE, duplicate SID) while
         resolving and programming a received prefix SID.

         [EFFECT] The Segment Routing tunnel corresponding to this SID will not
         be programmed.

         [RECOVERY] In case of system exhaustion, the IGP instance goes into
         overload. The operator must manually clear the IGP overload condition
         after freeing resources. IGP will attempt to program at the next SPF
         all tunnels which previously failed the programming operation."
    ::= { tmnxOspfNotifications 53 }

tmnxOspfSrSidNotInLabelRange     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfSrPfxSidFlags,
        tmnxOspfNotifPfxSidRangeStartLbl,
        tmnxOspfNotifPfxSidRangeMaxIdx,
        tmnxOspfNotifPfxNhAdvRtr
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] This notification is generated when OSPF receives a SID which
         is not within the label range of the nhop router.

         [EFFECT] The Segment Routing tunnel corresponding to this SID will not
         be programmed.

         [RECOVERY] Increase the label range or change the SID index to be
         within the current label range."
    ::= { tmnxOspfNotifications 54 }

tmnxOspfOverloadWarning          NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfLastOverloadEnterCode,
        tmnxOspfNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "A tmnxOspfOverloadWarning trap is sent out when OSPF reaches
         tmnxOspfAdvRtrLsaLimitWarning percent or tmnxOspfAdvRtrLsaLimit.

         tmnxOspfLastOverloadEnterCode holds the condition which caused OSPF to
         approach the limit."
    ::= { tmnxOspfNotifications 55 }

tmnxOspfRejectedAdjacencySid     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfRejectedAdjacencySid notification is sent when we
         do not establish an adjacency SID or adjacency PGID due to a lack of
         resources.

         This should be an edge-triggered notification. We should not send a
         second notification about adjacency SID allocation failure for the
         same adjacency. We should not send a second notification about
         adjacency PGID allocation failure for the same adjacency.

         [EFFECT] No effect.

         [RECOVERY] Whenever an ADJ-SID is released, the released ADJ-SID can
         be reused by any other adjacency which is waiting to receive an
         ADJ-SID. Whenever a PGID is released, the released PGID can be reused
         by any other adjacency which is waiting to receive a PGID."
    ::= { tmnxOspfNotifications 56 }

tmnxOspfAdjBfdSessionSetupFail   NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfBfdSessSetupFailReason
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfAdjBfdSessionSetupFail notification is sent when
         BFD session setup fails.

         [EFFECT] The system can not setup the BFD session.

         [RECOVERY] Depending on the tmnxOspfBfdSessSetupFailReason, recovery
         can be possible. Check the BFD configuration to recover."
    ::= { tmnxOspfNotifications 57 }

tmnxOspfSrgbBadLabelRange        NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfRouterId,
        tmnxOspfNotifSrgbRangeStartLbl,
        tmnxOspfNotifSrgbRangeMaxIdx,
        tmnxOspfNotifSrgbAdvRtrID,
        tmnxOspfNotifSrgbAreaId
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfSrgbBadLabelRange notification is sent when OSPF
         receives a bad SRGB label range from a router (e.g. overlapping with
         another label range.

         [EFFECT] The configured Segment Routing tunnels will be wrong.

         [RECOVERY] Change the label range to recover."
    ::= { tmnxOspfNotifications 58 }

tmnxOspfRejectedAdjacencySet     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfAdjSetRowStatus,
        tmnxOspfNotifyIfIndex,
        tmnxOspfNotifyNbrRouterId,
        tmnxOspfNotifyDescription
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfRejectedAdjacencySet notification is sent when an
         adjacency can not be assigned to an adjacency-set because it does not
         terminate on the same neighbor node as the other adjacencies.

         This notification each time the adjacency-set is programmed.

         [EFFECT] Adjacency-set nhops will not include this adjacency.

         [RECOVERY] Remove the interface from the adjacency-set or change the
         adjacency-set type to non parallel."
    ::= { tmnxOspfNotifications 59 }

tmnxOspfSidStatsIndexAlloc       NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfSidStatsSidType,
        tmnxOspfSidStatsPrefixType,
        tmnxOspfSidStatsPrefix,
        tmnxOspfSidStatsPrefixLength,
        tmnxOspfSidStatsIfIndex,
        tmnxOspfSidStatsAdjSet,
        tmnxOspfNotifStatsIndexStatus
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfSidStatsIndexAlloc notification is sent when the
         system is not able to allocate a statistic index to at least one SID.
         This indication is sent once, i.e. if the system retries to allocate a
         stat index but fails no new notification is sent. Conversely, in case
         the system resolves the situation and allocates stat indices to all
         needed SIDs a notification is sent to indicate that stat allocation is
         in nominal state.

         [EFFECT] No effect.

         [RECOVERY] No recovery is necessary."
    ::= { tmnxOspfNotifications 60 }

tmnxOspfDynHostnameDuplicate     NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfHostnameName
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfDynHostnameDuplicate notification is sent when
         another system advertises the same hostname as the local router.

         [EFFECT] No effect.

         [RECOVERY] No recovery is necessary."
    ::= { tmnxOspfNotifications 61 }

tmnxOspfDynHostnameInconsistent  NOTIFICATION-TYPE
    OBJECTS     {
        tmnxOspfHostnameName
    }
    STATUS      current
    DESCRIPTION
        "[CAUSE] The tmnxOspfDynHostnameInconsistent notification is sent when
         there are inconsistensies for and advertised hostname.

         [EFFECT] No effect.

         [RECOVERY] No recovery is necessary."
    ::= { tmnxOspfNotifications 62 }

END
