-- (C) COPYRIGHT HEWLETT-PACKARD COMPANY 2004.
--
--  LaserJet 4650 Printer Specific MIB.
--
--  Generated on Mar. 09, 2004.
--
--  Company names and product names mentioned herein may be 
--  trademarks, and/or registered trademarks of their respective
--  companies.
--
--  For internal and external use.
--
--  This MIB describes all the printer model specific
--  objects supported by the LaserJet 4650 printer
--  when networked connected using a JetDirect print
--  server.
--
--  This MIB complies with the following RFCs:
--
--  rfc 1157 Simple Network Management Protocol
--  rfc 1155 Structure of Management Information
--
--  Notes:
--
--  1) Objects containing a string which are defined in this MIB use the
--     first two bytes to hold the symbol set used to encode the string.
--     The Roman-8 symbol set has a hex encoding of 0x0115.  Other 
--     symbol sets are listed in the PCL 5 Comparison Guide in table
--     C-1 Symbol Set Values.
--
--  2) Some of the objects included are only supported if an accessory 
--     is installed.  These accessories include:
--       MIO based accessories
--       SIMM based accessories
--       AT hard disk
--       Paper handling accessories
--       Adobe PostScript accessory
LJ4650-MIB DEFINITIONS ::= BEGIN


hp  MODULE-IDENTITY
    LAST-UPDATED "0402181325Z"
    ORGANIZATION "Hewlett-Packard Company"
    CONTACT-INFO
                         "Customer Care Center
                          Tel:  +1 800-474-6836
                          WEB:  http://www.hp.com"

        DESCRIPTION  "Objects used in the HP LaserJet 4650 printer."

        REVISION        "0402181345Z"
        DESCRIPTION     "Added the hp module identity construct"

        REVISION        "0402181355Z"
        DESCRIPTION     "Removed the following incorrect object definitions:
                                        channelTable
                                        channelEntry
                                        channel-table
                                        channel-entry"

        ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 11}

netPMLmgmt OBJECT IDENTIFIER ::= { hp nm(2) system(3) netPeripheral(9) netPML(4) 2}



--hp OBJECT IDENTIFIER ::= { iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 11}
--dm OBJECT IDENTIFIER ::= { hp nm(2) hpsystem(3) net-peripheral(9) netdm(4) 2}

DisplayString ::= OCTET STRING

device                                 OBJECT IDENTIFIER ::=  { netPMLmgmt 1 } 
device-system                          OBJECT IDENTIFIER ::=  { device 1 } 
status-system                          OBJECT IDENTIFIER ::=  { device-system 2 } 
test                                   OBJECT IDENTIFIER ::=  { device-system 5 } 
processing-subsystem                   OBJECT IDENTIFIER ::=  { device 3 } 
pml                                    OBJECT IDENTIFIER ::=  { processing-subsystem 4 } 
background-message                     OBJECT IDENTIFIER ::=  { status-system 37 } 
background-message1                    OBJECT IDENTIFIER ::=  { background-message 1 } 
background-message2                    OBJECT IDENTIFIER ::=  { background-message 2 } 
control-panel-display                  OBJECT IDENTIFIER ::=  { status-system 65 } 
destination-subsystem                  OBJECT IDENTIFIER ::=  { device 4 } 
print-engine                           OBJECT IDENTIFIER ::=  { destination-subsystem 1 } 
settings-system                        OBJECT IDENTIFIER ::=  { device-system 1 } 
interface                              OBJECT IDENTIFIER ::=  { device-system 4 } 
simm                                   OBJECT IDENTIFIER ::=  { interface 1 } 
simm1                                  OBJECT IDENTIFIER ::=  { simm 1 } 
simm1-bank                             OBJECT IDENTIFIER ::=  { simm1 6 } 
simm1-bank1                            OBJECT IDENTIFIER ::=  { simm1-bank 1 } 
simm1-bank2                            OBJECT IDENTIFIER ::=  { simm1-bank 2 } 
simm2                                  OBJECT IDENTIFIER ::=  { simm 2 } 
simm2-bank                             OBJECT IDENTIFIER ::=  { simm2 6 } 
simm2-bank1                            OBJECT IDENTIFIER ::=  { simm2-bank 1 } 
simm2-bank2                            OBJECT IDENTIFIER ::=  { simm2-bank 2 } 
simm3                                  OBJECT IDENTIFIER ::=  { simm 3 } 
simm3-bank                             OBJECT IDENTIFIER ::=  { simm3 6 } 
simm3-bank1                            OBJECT IDENTIFIER ::=  { simm3-bank 1 } 
simm3-bank2                            OBJECT IDENTIFIER ::=  { simm3-bank 2 } 
simm4                                  OBJECT IDENTIFIER ::=  { simm 4 } 
simm4-bank                             OBJECT IDENTIFIER ::=  { simm4 6 } 
simm4-bank1                            OBJECT IDENTIFIER ::=  { simm4-bank 1 } 
simm4-bank2                            OBJECT IDENTIFIER ::=  { simm4-bank 2 } 
simm5                                  OBJECT IDENTIFIER ::=  { simm 5 } 
simm5-bank                             OBJECT IDENTIFIER ::=  { simm5 6 } 
simm5-bank1                            OBJECT IDENTIFIER ::=  { simm5-bank 1 } 
simm5-bank2                            OBJECT IDENTIFIER ::=  { simm5-bank 2 } 
job                                    OBJECT IDENTIFIER ::=  { device-system 6 } 
settings-job                           OBJECT IDENTIFIER ::=  { job 1 } 
operating-system                       OBJECT IDENTIFIER ::=  { device-system 19 } 
pdl                                    OBJECT IDENTIFIER ::=  { processing-subsystem 3 } 
settings-pdl                           OBJECT IDENTIFIER ::=  { pdl 1 } 
status-pdl                             OBJECT IDENTIFIER ::=  { pdl 2 } 
menus                                  OBJECT IDENTIFIER ::=  { print-engine 13 } 
errorlog                               OBJECT IDENTIFIER ::=  { device-system 11 } 
error1                                 OBJECT IDENTIFIER ::=  { errorlog 1 } 
error2                                 OBJECT IDENTIFIER ::=  { errorlog 2 } 
error3                                 OBJECT IDENTIFIER ::=  { errorlog 3 } 
error4                                 OBJECT IDENTIFIER ::=  { errorlog 4 } 
error5                                 OBJECT IDENTIFIER ::=  { errorlog 5 } 
error6                                 OBJECT IDENTIFIER ::=  { errorlog 6 } 
error7                                 OBJECT IDENTIFIER ::=  { errorlog 7 } 
error8                                 OBJECT IDENTIFIER ::=  { errorlog 8 } 
error9                                 OBJECT IDENTIFIER ::=  { errorlog 9 } 
error10                                OBJECT IDENTIFIER ::=  { errorlog 10 } 
error11                                OBJECT IDENTIFIER ::=  { errorlog 11 } 
error12                                OBJECT IDENTIFIER ::=  { errorlog 12 } 
error13                                OBJECT IDENTIFIER ::=  { errorlog 13 } 
error14                                OBJECT IDENTIFIER ::=  { errorlog 14 } 
error15                                OBJECT IDENTIFIER ::=  { errorlog 15 } 
error16                                OBJECT IDENTIFIER ::=  { errorlog 16 } 
error17                                OBJECT IDENTIFIER ::=  { errorlog 17 } 
error18                                OBJECT IDENTIFIER ::=  { errorlog 18 } 
error19                                OBJECT IDENTIFIER ::=  { errorlog 19 } 
error20                                OBJECT IDENTIFIER ::=  { errorlog 20 } 
error21                                OBJECT IDENTIFIER ::=  { errorlog 21 } 
error22                                OBJECT IDENTIFIER ::=  { errorlog 22 } 
error23                                OBJECT IDENTIFIER ::=  { errorlog 23 } 
error24                                OBJECT IDENTIFIER ::=  { errorlog 24 } 
error25                                OBJECT IDENTIFIER ::=  { errorlog 25 } 
error26                                OBJECT IDENTIFIER ::=  { errorlog 26 } 
error27                                OBJECT IDENTIFIER ::=  { errorlog 27 } 
error28                                OBJECT IDENTIFIER ::=  { errorlog 28 } 
error29                                OBJECT IDENTIFIER ::=  { errorlog 29 } 
error30                                OBJECT IDENTIFIER ::=  { errorlog 30 } 
error31                                OBJECT IDENTIFIER ::=  { errorlog 31 } 
error32                                OBJECT IDENTIFIER ::=  { errorlog 32 } 
error33                                OBJECT IDENTIFIER ::=  { errorlog 33 } 
error34                                OBJECT IDENTIFIER ::=  { errorlog 34 } 
error35                                OBJECT IDENTIFIER ::=  { errorlog 35 } 
error36                                OBJECT IDENTIFIER ::=  { errorlog 36 } 
error37                                OBJECT IDENTIFIER ::=  { errorlog 37 } 
error38                                OBJECT IDENTIFIER ::=  { errorlog 38 } 
error39                                OBJECT IDENTIFIER ::=  { errorlog 39 } 
error40                                OBJECT IDENTIFIER ::=  { errorlog 40 } 
error41                                OBJECT IDENTIFIER ::=  { errorlog 41 } 
error42                                OBJECT IDENTIFIER ::=  { errorlog 42 } 
error43                                OBJECT IDENTIFIER ::=  { errorlog 43 } 
error44                                OBJECT IDENTIFIER ::=  { errorlog 44 } 
error45                                OBJECT IDENTIFIER ::=  { errorlog 45 } 
error46                                OBJECT IDENTIFIER ::=  { errorlog 46 } 
error47                                OBJECT IDENTIFIER ::=  { errorlog 47 } 
error48                                OBJECT IDENTIFIER ::=  { errorlog 48 } 
error49                                OBJECT IDENTIFIER ::=  { errorlog 49 } 
error50                                OBJECT IDENTIFIER ::=  { errorlog 50 } 
channel                                OBJECT IDENTIFIER ::=  { device 6 } 
display                                OBJECT IDENTIFIER ::=  { status-system 20 } 
display-status                         OBJECT IDENTIFIER ::=  { display 1 } 
id                                     OBJECT IDENTIFIER ::=  { device-system 3 } 
pdl-pcl                                OBJECT IDENTIFIER ::=  { pdl 3 } 
pdl-postscript                         OBJECT IDENTIFIER ::=  { pdl 4 } 
pdl-pdf                                OBJECT IDENTIFIER ::=  { pdl 15 } 
socket-ping                            OBJECT IDENTIFIER ::=  { interface 7 } 
active-print-jobs                      OBJECT IDENTIFIER ::=  { job 2 } 
job-being-parsed                       OBJECT IDENTIFIER ::=  { active-print-jobs 1 } 
job-info                               OBJECT IDENTIFIER ::=  { job 5 } 
job-info-job-settings                  OBJECT IDENTIFIER ::=  { job-info 21 } 
job-info-attribute                     OBJECT IDENTIFIER ::=  { job-info 23 } 
job-info-accounting                    OBJECT IDENTIFIER ::=  { job-info 28 } 
held-job                               OBJECT IDENTIFIER ::=  { job 7 } 
held-job-info                          OBJECT IDENTIFIER ::=  { held-job 1 } 
held-job-control                       OBJECT IDENTIFIER ::=  { held-job 2 } 
source-subsystem                       OBJECT IDENTIFIER ::=  { device 2 } 
spooler                                OBJECT IDENTIFIER ::=  { source-subsystem 4 } 
settings-spooler                       OBJECT IDENTIFIER ::=  { spooler 1 } 
pjl                                    OBJECT IDENTIFIER ::=  { processing-subsystem 5 } 
mio                                    OBJECT IDENTIFIER ::=  { interface 3 } 
mio1                                   OBJECT IDENTIFIER ::=  { mio 1 } 
mio2                                   OBJECT IDENTIFIER ::=  { mio 2 } 
mio3                                   OBJECT IDENTIFIER ::=  { mio 3 } 
io                                     OBJECT IDENTIFIER ::=  { source-subsystem 1 } 
settings-io                            OBJECT IDENTIFIER ::=  { io 1 } 
ports                                  OBJECT IDENTIFIER ::=  { io 3 } 
port1                                  OBJECT IDENTIFIER ::=  { ports 1 } 
tables                                 OBJECT IDENTIFIER ::=  { device 7 } 
remote-procedure-call                  OBJECT IDENTIFIER ::=  { device-system 13 } 
settings-rpc                           OBJECT IDENTIFIER ::=  { remote-procedure-call 1 } 
status-rpc                             OBJECT IDENTIFIER ::=  { remote-procedure-call 2 } 
file-system                            OBJECT IDENTIFIER ::=  { device-system 10 } 
settings-file-system                   OBJECT IDENTIFIER ::=  { file-system 1 } 
file-systems                           OBJECT IDENTIFIER ::=  { file-system 3 } 
file-system2                           OBJECT IDENTIFIER ::=  { file-systems 2 } 
file-system3                           OBJECT IDENTIFIER ::=  { file-systems 3 } 
file-system4                           OBJECT IDENTIFIER ::=  { file-systems 4 } 
resource-manager                       OBJECT IDENTIFIER ::=  { device-system 12 } 
mass-storage-resources                 OBJECT IDENTIFIER ::=  { resource-manager 3 } 
mass-storage-block-driver              OBJECT IDENTIFIER ::=  { device-system 15 } 
settings-mass-storage-bd               OBJECT IDENTIFIER ::=  { mass-storage-block-driver 1 } 
status-mass-storage-bd                 OBJECT IDENTIFIER ::=  { mass-storage-block-driver 2 } 
device-configure                       OBJECT IDENTIFIER ::=  { settings-system 32 } 
settings-prt-eng                       OBJECT IDENTIFIER ::=  { print-engine 1 } 
marking-agent-density                  OBJECT IDENTIFIER ::=  { settings-prt-eng 9 } 
status-prt-eng                         OBJECT IDENTIFIER ::=  { print-engine 2 } 
printer-calibration-dhalf              OBJECT IDENTIFIER ::=  { status-prt-eng 37 } 
printer-calibration-cpr                OBJECT IDENTIFIER ::=  { status-prt-eng 38 } 
intray                                 OBJECT IDENTIFIER ::=  { print-engine 3 } 
settings-intray                        OBJECT IDENTIFIER ::=  { intray 1 } 
intrays                                OBJECT IDENTIFIER ::=  { intray 3 } 
intray1                                OBJECT IDENTIFIER ::=  { intrays 1 } 
intray2                                OBJECT IDENTIFIER ::=  { intrays 2 } 
intray3                                OBJECT IDENTIFIER ::=  { intrays 3 } 
intray5                                OBJECT IDENTIFIER ::=  { intrays 5 } 
outbin                                 OBJECT IDENTIFIER ::=  { print-engine 4 } 
settings-outbin                        OBJECT IDENTIFIER ::=  { outbin 1 } 
outbins                                OBJECT IDENTIFIER ::=  { outbin 3 } 
outbin1                                OBJECT IDENTIFIER ::=  { outbins 1 } 
marking-agent                          OBJECT IDENTIFIER ::=  { print-engine 5 } 
settings-marking-agent                 OBJECT IDENTIFIER ::=  { marking-agent 1 } 
print-media                            OBJECT IDENTIFIER ::=  { print-engine 8 } 
settings-print-media                   OBJECT IDENTIFIER ::=  { print-media 1 } 
media-info                             OBJECT IDENTIFIER ::=  { print-media 3 } 
media1                                 OBJECT IDENTIFIER ::=  { media-info 1 } 
media2                                 OBJECT IDENTIFIER ::=  { media-info 2 } 
media3                                 OBJECT IDENTIFIER ::=  { media-info 3 } 
media4                                 OBJECT IDENTIFIER ::=  { media-info 4 } 
media5                                 OBJECT IDENTIFIER ::=  { media-info 5 } 
media6                                 OBJECT IDENTIFIER ::=  { media-info 6 } 
media7                                 OBJECT IDENTIFIER ::=  { media-info 7 } 
media8                                 OBJECT IDENTIFIER ::=  { media-info 8 } 
media9                                 OBJECT IDENTIFIER ::=  { media-info 9 } 
media10                                OBJECT IDENTIFIER ::=  { media-info 10 } 
media11                                OBJECT IDENTIFIER ::=  { media-info 11 } 
media12                                OBJECT IDENTIFIER ::=  { media-info 12 } 
media13                                OBJECT IDENTIFIER ::=  { media-info 13 } 
media14                                OBJECT IDENTIFIER ::=  { media-info 14 } 
media15                                OBJECT IDENTIFIER ::=  { media-info 15 } 
media16                                OBJECT IDENTIFIER ::=  { media-info 16 } 
media17                                OBJECT IDENTIFIER ::=  { media-info 17 } 
media18                                OBJECT IDENTIFIER ::=  { media-info 18 } 
media19                                OBJECT IDENTIFIER ::=  { media-info 19 } 
media20                                OBJECT IDENTIFIER ::=  { media-info 20 } 
media21                                OBJECT IDENTIFIER ::=  { media-info 21 } 
media22                                OBJECT IDENTIFIER ::=  { media-info 22 } 
media23                                OBJECT IDENTIFIER ::=  { media-info 23 } 
media24                                OBJECT IDENTIFIER ::=  { media-info 24 } 
media25                                OBJECT IDENTIFIER ::=  { media-info 25 } 
media26                                OBJECT IDENTIFIER ::=  { media-info 26 } 
media-modes                            OBJECT IDENTIFIER ::=  { print-media 4 } 
media-types                            OBJECT IDENTIFIER ::=  { print-media 8 } 
media-counts                           OBJECT IDENTIFIER ::=  { print-media 7 } 
media-size                             OBJECT IDENTIFIER ::=  { print-media 5 } 
accounting                             OBJECT IDENTIFIER ::=  { device-system 16 } 
printer-accounting                     OBJECT IDENTIFIER ::=  { accounting 1 } 
printed-media-usage                    OBJECT IDENTIFIER ::=  { printer-accounting 1 } 
printer-color-accounting               OBJECT IDENTIFIER ::=  { accounting 3 } 
printed-media-color-usage              OBJECT IDENTIFIER ::=  { printer-color-accounting 1 } 
printed-modes-accounting               OBJECT IDENTIFIER ::=  { accounting 4 } 
printed-modes-usage                    OBJECT IDENTIFIER ::=  { printed-modes-accounting 1 } 
source-tray-accounting                 OBJECT IDENTIFIER ::=  { accounting 5 } 
source-tray-usage                      OBJECT IDENTIFIER ::=  { source-tray-accounting 1 } 
destination-bin-accounting             OBJECT IDENTIFIER ::=  { accounting 6 } 
destination-bin-usage                  OBJECT IDENTIFIER ::=  { destination-bin-accounting 1 } 
consumables                            OBJECT IDENTIFIER ::=  { print-engine 10 } 
consumables-1                          OBJECT IDENTIFIER ::=  { consumables 1 } 
consumable-status                      OBJECT IDENTIFIER ::=  { consumables-1 1 } 
consumables-status                     OBJECT IDENTIFIER ::=  { consumables 5 } 
consumables-life                       OBJECT IDENTIFIER ::=  { consumables-status 1 } 
print-meter                            OBJECT IDENTIFIER ::=  { print-engine 11 } 
printer-average                        OBJECT IDENTIFIER ::=  { print-meter 1 } 
webserver-proc-sub                     OBJECT IDENTIFIER ::=  { processing-subsystem 9 } 
settings-webserver                     OBJECT IDENTIFIER ::=  { webserver-proc-sub 1 } 
firmware-download                      OBJECT IDENTIFIER ::=  { device-system 18 } 
upgradable-devices                     OBJECT IDENTIFIER ::=  { device-system 20 } 


perm-store-init-occurred OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object will set the cAllPermDevices bit when a full perm		
                storage initialization occurs (as would be the case for a brand		
                new system or as a result of a powerup key sequence). If only one		
                device was initialized (as would be the case if a disk were		
                added to an existing system or a formatter were swapped out),		
                then only the appropriate collection bits will be returned. If		
                there are no collection bits set then this indicates that no		
                initialization took place."
::= { status-system 10 }
               
               
self-test OBJECT-TYPE
    SYNTAX  INTEGER {
		   eNotInASelfTest(1),
		   eNonDestructiveSelfTest(4)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Writing this object allows a device self test to be started.		
                Reading this object provides an indication what self-test is		
                currently executing, if any. Actual self-test operation is		
                device specific. A self test may not be allowed at any		
                arbitrary time. If the device supports the requested self test,		
                but can not start the execution of the self test when		
                requested, the device will respond with		
                <genErr>. If a non-destructive self		
                test is being started, the device will generate a response		
                before the self test is completed. RECOMMENDATION: If the		
                device is ready (i.e. the NOT-READY-PRINTER object does not		
                contain any items, except maybe being off-line) and is idle		
                (i.e. the NOT-IDLE object does not contain any items), this		
                request should always succeed. This provides a mechanism for		
                driver writers to always determine if the action will succeed		
                or not.
                Additional information:
                The eNonDestructiveSelfTest performs limited
                testing on the printer and its attached paper handling
                devices. After the self-test is complete a
                configuration page is printed. The recommended
                way to cause a configuration page to be printed is to
                use the PRINT-INTERNAL-PAGE object.  
                
                Setting this object to eNonDestructiveSelfTest results in a status of <noError>
                and a value of eNonDestructiveSelfTest being returned.
                If the printer is not idle (whether printing an external job or printing
                an internal page), this action will be delayed until the next job boundary.
                
                See the PRINT-INTERNAL-PAGE object for more details."
::= { test 1 }
               
               
print-internal-page OBJECT-TYPE
    SYNTAX  INTEGER {
		   eNotPrintingAnInternalPage(1),
		   ePrintingAnUnknownInternalPage(2),
		   eDeviceDemoPage1ConfigurationPage(3),
		   eDeviceDemoPage2(4),
		   eDeviceDemoPage5ErrorLog(7),
		   eDeviceDemoPage6FileSystemDirectoryListing(8),
		   eDeviceDemoPage7MenuMap(9),
		   ePrintUsagePage(100),
		   eSuppliesPage(101),
		   eDevicePaperPathTest(254),
		   eDevicePageRegistrationPage(255),
		   ePrintQualityPages(256),
		   eHighVoltageTestPage(257),
		   eColorPaletteRGBPage(258),
		   eColorPaletteCMYKPage(259),
		   ePCLFontList1(350),
		   ePSFontList(450)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Writing this object to a value other than		
                eNotPrintingAnInternalPage causes the device to attempt to		
                print an internally generated page. Reading this object		
                provides an indication what internally generated page is		
                currently being printed, if any. The actual page is device		
                specific. Some devices may support continuously printing an		
                internally generated page. Setting this object to		
                eNotPrintingAnInternalPage terminates continuously printing		
                internally generated pages. An internally generated page may		
                not be allowed to be printed at any arbitrary time; under what		
                conditions it will succeed or fail is device specific. If the		
                device supports the requested page, but can not start printing		
                the page when requested, the device will respond with		
                <genErr>. RECOMMENDATION: If the		
                device is ready (i.e. the NOT-READY-PRINTER object does not		
                contain any items, except maybe being off-line) and is idle		
                (i.e. the NOT-IDLE object does not contain any items), this		
                request should always succeed. This provides a mechanism for		
                driver writers to always determine if the action will succeed		
                or not.
                Additional information:
                Previous products used 
                ePCLDemoPage1ConfigurationPage(300) for the
                Configuration or Self Test page.  This product uses
                eDeviceDemoPage1ConfigurationPage(3).  
                
                LJ8150 does not support continuously printing a demo page.  
                
                When this object is set to a valid value, the status returned is <noError>
                and the value returned is ePrintingAnUnknownInternalPage.  If the printer
                is idle, the page will be printed immediately.  If the printer is
                currently printing another job, the internal page requested will not print
                until that job is finished.  
                
                Setting this object to a valid value causes the
                desired page to be formatted and put in the printer's
                print queue.  While the page is being formatted a get on this object will
                return the value ePrintingAnUnknownInternalPage.  Once the page (or pages)
                is finished being formatted, this object returns a value of
                eNotPrintingAnInternalPage, even though the page may not have finished
                being printed.  
                
                Setting this object multiple times will queue up the requests, but only
                a limited number will be queued.  Once the queue is full, additional
                requests will be ignored."
::= { test 2 }
               
               
localization-languages-supported OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The list of languages supported by the device. The languages		
                are primarily, but not limited to, two character codes from ISO		
                639, each separated by a comma character.
                Additional information:
                This string will always be in the Roman-8 character set.
                See prtLocalizationLanguage for details about each language value."
::= { status-system 52 }
               
               
localization-countries-supported OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The list of countries supported by the device. The countries		
                are primarily, but not limited to, two character codes from ISO		
                3166, each separated by a comma character.
                Additional information:
                This string will always be in the Roman-8 character set.
                See prtLocalizationCountry for details about each country value."
::= { status-system 53 }
               
               
background-status-msg-line1-part1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The string displayed on the device's front panel in place of		
                the printer's built-in background status string. An example		
                built-in background status string is '00 READY'.
                Additional information:
                The display size for the LJ8150 printers is 2 X 16.
                The value of this object and the current value of
                BACKGROUND-STATUS-MSG-LINE2-PART1 are displayed
                together on the 2-line display, but they must 
                be set independently.  If line 2 has been set, and the
                next message to be displayed only requires line 1,
                BACKGROUND-STATUS-MSG-LINE2-PART1 must be set to the 
                null string to clear it.  
                This object allows a message to be displayed when
                it is the highest priority message. Setting this
                object does not guarantee the message will be
                displayed; and reading it returns the value last
                written, not the currently displayed message (use
                prtConsoleDisplayBufferText to read the
                display).  
                The priority assigned for displaying this message
                is one lower than the READY message.  In other words,
                the only message that can be replaced by these
                objects is the READY message.  
                To clear the message, write a null string to both
                this object and BACKGROUND-STATUS-MSG-LINE2-PART1."
::= { background-message1 1 }
               
               
background-status-msg-line2-part1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The string displayed on the device's front panel in place of		
                the printer's built-in background status string. An example		
                built-in background status string is '00 READY'.
                Additional information:
                See BACKGROUND-STATUS-MSG-LINE1-PART1"
::= { background-message2 1 }
               
               
control-panel-button-press OBJECT-TYPE
    SYNTAX  INTEGER {
		   eGoButton(1),
		   eMenuPlusButton(2),
		   eMenuMinusButton(3),
		   eItemPlusButton(4),
		   eItemMinusButton(5),
		   eValuePlusButton(6),
		   eValueMinusButton(7),
		   eSelectButton(8),
		   eCancelJobButton(9),
		   ePauseResumeButton(10),
		   eUpArrowButton(11),
		   eDownArrowButton(12),
		   eBackButton(13),
		   eQuestionMarkButton(14),
		   eClearButton(15),
		   eNumericButton0(16),
		   eNumericButton1(17),
		   eNumericButton2(18),
		   eNumericButton3(19),
		   eNumericButton4(20),
		   eNumericButton5(21),
		   eNumericButton6(22),
		   eNumericButton7(23),
		   eNumericButton8(24),
		   eNumericButton9(25),
		   eRotateButton(26),
		   eInfoButton(27),
		   eMenuButton(28),
		   eStopButton(29)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Writing this object simulates pressing a button on the control		
                panel. Reading it will return the last key pressed either on		
                the control panel or via PML. The device POS will specify which		
                keys are supported."
::= { status-system 60 }
               
               
control-panel-display-contents-change-counter OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "A counter which increments whenever the contents of the front		
                panel display changes. This object is implemented as a 32-bit		
                signed integer which rolls over to zero when it reaches a		
                maximum value."
::= { status-system 63 }
               
               
control-panel-display-contents-crc OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Reading this object returns a 32-bit Cyclical Redundancy Check		
                (CRC) which represents the current contents of the display.
                Additional information:
                This object has been implimented as an 8-bit CRC for
                this product."
::= { status-system 64 }
               
               
control-panel-display-graphical-contents OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Reading this object returns a graphical file format image		
                representing the current pixel content of the display. The		
                device POS will specify the expected screen resolution, color		
                depth of the display and graphics file format for a given		
                product (eg. 160x64x1 GIF format OR 640x240x4 JPEG format). If		
                the image is large enough that it needs to be returned in		
                multiple objects then each array object will contain a portion		
                of the image. The image will then need to be reconstructed by a		
                host application. An application that needs to determine if		
                their is an additional object to be retreived will need to		
                perform a GETNEXT operation until there are no more objects in		
                the sub-tree.
                Additional information:
                This object returns a GIF image that represents the
                current contents of the 160x64x1 control panel display.  Most
                display images require more than one instance of this object
                in order to retreive the complete GIF image."
::= { control-panel-display 1 }
               
               
control-panel-key-press OBJECT-TYPE
    SYNTAX  INTEGER(0..2147483648)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Writing this object simulates pressing a key on the control		
                panel. Reading it will return the last key pressed either on		
                the control panel or via PML. This object obsoletes/replaces		
                CONTROL-PANEL-BUTTON-PRESS object which was unable to represent		
                each of the possible key combinations of our current control		
                panels (ie. Full QWERTY keyboard). The device POS will specify		
                the full range of keys supported by this object.
                Additional information:
                Writing this object simulates pressing a key on the
                control panel. Reading it will return the last key pressed
                either on the control panel or via PML.  This object
                obsoletes/replaces CONTROL-PANEL-BUTTON-PRESS object which
                was unable to represent each of the possible key combinations
                of our current control panels (ie. Full QWERTY keyboard).  
                
                This product supports the following Unified Key Encoding codes:
                UKE_CP_SELECT 0x85 (133),
                UKE_CP_STOP 0x82 (130),
                UKE_CP_MENU 0x8a (138),
                UKE_CP_UP_ARROW 0x89 (137),
                UKE_CP_DOWN_ARROW 0x88 (136),
                UKE_CP_LEFT_ARROW 0x87 (135),
                UKE_CP_HELP 0x8b (139),
                UKE_CP_CLEAR 0x84 (132),
                UKE_CP_PAD_0 0xb0 (176),
                UKE_CP_PAD_1 0xb1 (177),
                UKE_CP_PAD_2 0xb2 (178),
                UKE_CP_PAD_3 0xb3 (179),
                UKE_CP_PAD_4 0xb4 (180),
                UKE_CP_PAD_5 0xb5 (181),
                UKE_CP_PAD_6 0xb6 (182),
                UKE_CP_PAD_7 0xb7 (183),
                UKE_CP_PAD_8 0xb8 (184),
                UKE_CP_PAD_9 0xb9 (185)"
::= { status-system 66 }
               
               
energy-star OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the Energy Star sleep value. If the value		
                is greater than zero, then the device will go into energy		
                saving sleep mode after the print engine has been idle for the		
                number of seconds specified by this object. A value of zero		
                means Energy Star is disabled and the device will not go to		
                sleep based on print engine idle time. The value must be		
                non-negative.
                Additional information:
                Returns or changes the Energy Star sleep value.
                The device will go into energy saving sleep
                mode after the print engine has been idle for
                the number of seconds specified by this
                object.  
                
                LJ5500 supports values of 0, 60, 900, 1800,
                3600, 5400, 7200, 14400  seconds.  A value of 0 means
                never enter sleep mode based on the print engine
                idle time.  Setting to an unsupported value causes
                the printer to substitute a value (listed
                below) and to return <noError>
                status.  Setting this value when the printer is in
                sleep mode will not cause it to wakeup unless it is
                set to 0.  
                
                The values are as follow:  
                <=0                 snap to 0  
                >=1    and <= 1349  snap to 900   (15 minutes)  
                >=1350 and <= 2699  snap to 1800  (30 minutes)  
                >=2700 and <= 4499  snap to 3600  (1 hour)  
                >=4500 and <= 6299  snap to 5400  (90 minutes)  
                >=6300 and <= 10799 snap to 7200  (2 hours)  
                >=10800             snap to 14400 (4 hours)."
::= { settings-system 1 }
               
               
sleep-mode OBJECT-TYPE
    SYNTAX  INTEGER {
		   eFalse(1),
		   eTrue(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns eTrue if the device is in energy saving sleep mode,		
                otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes		
                the device to wake up, if it is in sleep mode. Setting		
                SLEEP-MODE to eTrue causes the device to go into sleep mode.
                Additional information:
                This object returns eTrue if the device is in
                energy saving sleep mode, otherwise it returns eFalse.  
                Setting this object to eTrue while the printer
                is awake will not change the printer's current state
                and will return <genErr>
                status. NOTE: This object should behave this way
                when the printer does not have an instant-on fuser.  
                Setting this object to eTrue while printer is already
                in Sleep Mode will not change the printer's
                current state and will return <noError> status.  
                Setting this object to eFalse while printer is already
                awake will not change the printer's current state and
                will return <noError> status.  
                Setting this object to eFalse while the printer is
                asleep causes the device to wake up.   "
::= { settings-system 2 }
               
               
on-off-line OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOnline(1),
		   eOffline(2),
		   eOfflineAtEndOfJob(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "To bring the PDL processing sub-system on or off line. If the		
                device is a printer, then the printer does not process print		
                job data when the printer is off line. PML communication		
                persists.
                Additional information:
                When the printer is in the Offline state,
                printing will stop as soon as possible (no more sheets
                of media are pulled from input trays).  The I/O
                is taken offline also.  
                
                Setting to eOnline has the following affect:
                Printer will immediately go to or remain in the Online
                state; <noError> status is returned.  
                If the printer's current state
                is Offline with a pending error condition that
                prevents the printer from going to the Online
                state, the printer will remain in the Offline state;
                <genErr> status is returned
                                
                Setting to eOffline has the following affect:
                Printer will immediately go to or remain in the
                Offline state; <noError> status is returned.
                If pages are being printed, those pages will complete
                with the printer in the Offline state.  
                
                Setting to eOfflineAtEndOfJob has the following
                affect:  
                If not in a job or already in the Offline state, the
                printer will immediately go to or remain in the
                Offline state; <noError> status is returned.  
                If in a job and the current state is Online, the
                printer will remain in the Online state, with the
                value of this object as eOfflineAtEndOfJob, until the
                end of the job; <noError> status is returned. At the end of
                the job, the printer goes to the Offline state and the
                value of this object becomes eOffline.  
                Setting this object to eOffline or eOnline before the
                end of the job causes the action for that value to be
                taken immediately."
::= { status-system 5 }
               
               
continue OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInitiateAction(1)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "A device can support a class of errors called continuable		
                errors. When a continuable error is encountered, the device		
                requires a continue event to occur before the device will		
                continue operation. One continue event is setting the CONTINUE		
                object to eInitiateAction. Devices can support other continue		
                events, like auto-continue. A continue event causes the		
                continuable error to be acknowledged, thus allowing the device		
                to continue. Each device needs to list the continuable errors.		
                If the device doesn't currently have an unacknowledged		
                continuable error, the response will contain		
                <genErr>.
                Additional information:
                See the CLEARABLE-WARNING and AUTO-CONTINUE objects for the
                errors that this object will clear."
::= { status-system 6 }
               
               
auto-continue OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Indicates if the device will automatically continue after		
                encountering a continuable error. If AUTO-CONTINUE is set to		
                eOn, the device will automatically generate continue event to		
                acknowledge continuable errors. If AUTO-CONTINUE is set to		
                eOff, then some other continue event will have to acknowledge		
                the continuable error.
                Additional information:
                If this is set to eOn the device displays an
                error message and goes offline for ten seconds. After ten seconds the
                printer automatically returns to the online state.  
                
                If this is set to eOff then the device displays an error message and
                goes offline. It remains offline until the operator presses the GO key or
                until the CONTINUE object is set.  
                
                If the printer is not idle, the new value may not take effect
                until a job boundary is reached. If a get is done on this object before
                the job boundary is reached, the value last set will be returned."
::= { status-system 7 }
               
               
simm1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in SIMM		
                slot 1.    	
                    eEmpty means the device did not detect any option installed		
                        in the interface slot.    	
                    eUnknown means the device doesn't recognize the installed		
                        option.    	
                    eUnSupported means the device recognizes the installed		
                        option, but does not support the option.    	
                    eReadOnlyMemory means the installed option contains ROM		
                        Ics.    	
                    eVolatileRandomAccessMemory means the installed option		
                        contains RAM ICs that loose data when the power is		
                        turned off.    	
                    eNonVolatileRandomAccessMemory means that the installed		
                        option contains RAM ICs that do not loose data when the		
                        power is turned off.    	
                    eFlashMemory means that the installed option contains a		
                        type of non-volatile RAM that needs to be erased before		
                        it can be written.    	
                    eDiskDrive means the installed option contains a disk		
                        drive.    	
                    eRamRom means the installed option contains both volatile		
                        random access memory and read only memory.    	
                    eInputPHD means the installed option is an input paper		
                        handling device.    	
                    eOutputPHD means the installed option is an output paper		
                        handling device. eIOCard means the installed option is		
                        an I/O card.   
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on LJ8150. eRamRom is used to denote LJ8150's combo simm."
::= { simm1 4 }
               
               
simm1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of the SIMM installed in		
                SIMM slot 1. The capacity is dependent on the type of option,		
                as indicated by the SIMM1-TYPE object. This object has no		
                meaning if the installed option type is eUnknown or		
                eReadOnlyMemory. This object contains the size, in bytes, if		
                the installed option type is eVolatileRandomAccessMemory,		
                eNonVolatileRandomAccessMemory, eFlashMemory, or eDiskDrive. If		
                the type of the installed option is eRamRom, this object		
                contains the size, in bytes, of the random access memory. If		
                the type of the installed option is eInputPHD, the capacity		
                indicates the number of input trays supported by the installed		
                option. If the type of the installed option is eOutputPHD, the		
                capacity indicates the number of output bins supported by the		
                installed option. If the type of the installed option is		
                eIOCard, the capacity indicates the number of logical I/O ports		
                supported by the I/O card.
                Additional information:
                Returns an indication of the capacity of the 
                installed option in bytes.  This object is not 
                supported unless the SIMM1-TYPE type is 
                eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
                For eRamRom only the size of the Ram portion of the SIMM
                is returned."
::= { simm1 5 }
               
               
simm1-bank1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 1		
                of SIMM slot 1. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm1-bank1 1 }
               
               
simm1-bank1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 1 of the SIMM		
                installed in SIMM slot 1. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM1-BANK1-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm1-bank1 2 }
               
               
simm1-bank2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 2		
                of SIMM slot 1. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm1-bank2 1 }
               
               
simm1-bank2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 2 of the SIMM		
                installed in SIMM slot 1. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM1-BANK2-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm1-bank2 2 }
               
               
simm2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in SIMM		
                slot 2. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on LJ8150. eRamRom is used to denote LJ8150's combo simm."
::= { simm2 4 }
               
               
simm2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of the SIMM installed in		
                SIMM slot 2. See SIMM1-CAPACITY for a description.
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on LJ8150. Returns an indication of the capacity of the
                installed option in bytes.  This object is not
                supported unless the SIMM2-TYPE type is
                eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
                For eRamRom only the size of the Ram portion of the
                SIMM is returned."
::= { simm2 5 }
               
               
simm2-bank1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 1		
                of SIMM slot 2. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm2-bank1 1 }
               
               
simm2-bank1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 1 of the SIMM		
                installed in SIMM slot 2. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM2-BANK1-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm2-bank1 2 }
               
               
simm2-bank2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 2		
                of SIMM slot 2. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm2-bank2 1 }
               
               
simm2-bank2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 2 of the SIMM		
                installed in SIMM slot 2. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM2-BANK2-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm2-bank2 2 }
               
               
simm3-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in SIMM		
                slot 3. See SIMM1-TYPE for a description."
::= { simm3 4 }
               
               
simm3-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of the SIMM installed in		
                SIMM slot 3. See SIMM1-CAPACITY for a description.
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on LJ8150. Returns an indication of the capacity of the
                installed option in bytes.  This object is not
                supported unless the SIMM3-TYPE type is
                eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
                For eRamRom only the size of the Ram portion of the
                simm is returned."
::= { simm3 5 }
               
               
simm3-bank1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 1		
                of SIMM slot 3. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm3-bank1 1 }
               
               
simm3-bank1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 1 of the SIMM		
                installed in SIMM slot 3. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM3-BANK1-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm3-bank1 2 }
               
               
simm3-bank2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 2		
                of SIMM slot 3. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm3-bank2 1 }
               
               
simm3-bank2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 2 of the SIMM		
                installed in SIMM slot 3. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM3-BANK2-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm3-bank2 2 }
               
               
simm4-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in SIMM		
                slot 4. See SIMM1-TYPE for a description."
::= { simm4 4 }
               
               
simm4-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of the SIMM installed in		
                SIMM slot 4. See SIMM1-CAPACITY for a description.
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on Lj8150. Returns an indication of the capacity of the
                installed option in bytes.  This object is not
                supported unless the SIMM4-TYPE type is
                eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
                For eRamRom only the size of the Ram portion of the
                simm is returned."
::= { simm4 5 }
               
               
simm4-bank1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 1		
                of SIMM slot 4. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm4-bank1 1 }
               
               
simm4-bank1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 1 of the SIMM		
                installed in SIMM slot 4. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM4-BANK1-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm4-bank1 2 }
               
               
simm4-bank2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 2		
                of SIMM slot 4. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm4-bank2 1 }
               
               
simm4-bank2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 2 of the SIMM		
                installed in SIMM slot 4. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM4-BANK2-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm4-bank2 2 }
               
               
simm5-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in SIMM		
                slot 5. See SIMM1-TYPE for a description."
::= { simm5 4 }
               
               
simm5-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of the SIMM installed in		
                SIMM slot 5. See SIMM1-CAPACITY for a description.
                Additional information:
                This object is used for describing DIMMs instead
                of SIMMs on LJ8150. Returns an indication of the capacity of the
                installed option in bytes.  This object is not
                supported unless the SIMM5-TYPE type is
                eVolatileRandomAccessMemory, eRamRom, or eFlashMemory.
                For eRamRom only the size of the Ram portion of the
                simm is returned."
::= { simm5 5 }
               
               
simm5-bank1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 1		
                of SIMM slot 5. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm5-bank1 1 }
               
               
simm5-bank1-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 1 of the SIMM		
                installed in SIMM slot 5. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM5-BANK1-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm5-bank1 2 }
               
               
simm5-bank2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eUnSupported(3),
		   eReadOnlyMemory(4),
		   eVolatileRandomAccessMemory(5),
		   eFlashMemory(7),
		   eRamRom(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in Bank 2		
                of SIMM slot 5. See SIMM1-TYPE for a description.
                Additional information:
                This object is used for describing the type
                of DIMM banks.  Each physical DIMM slot has up to 2 banks."
::= { simm5-bank2 1 }
               
               
simm5-bank2-capacity OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the capacity of Bank 2 of the SIMM		
                installed in SIMM slot 5. See SIMM1-CAPACITY for a		
                description.
                Additional information:
                Returns an indication of the capacity of the
                installed bank option in bytes.  This object is not
                supported unless the SIMM5-BANK2-TYPE type is
                eReadOnlyMemory, eFlashMemory, eEDORandomAccessMemory,
                eSDRandomAccessMemory, eSRandomAccessMemory,
                or eFPMRandomAccessMemory."
::= { simm5-bank2 2 }
               
               
cancel-job OBJECT-TYPE
    SYNTAX  INTEGER(0..32767)
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Cancels the print job whose ID matches the value written to the		
                CANCEL-JOB object. The host first learns the job ID using the		
                CURRENT-JOB-PARSING-ID command. If the printer has completely		
                processed the job, the printer responds with		
                <badValue>. If the value of the		
                CURRENT-JOB-PARSING-ID is smaller than the value written to the		
                CANCEL-JOB object, then the printer responds with		
                <badValue>. When read, returns the value		
                of the last job ID what was canceled, or -1 to indicate no job		
                has been canceled.
                Additional information:
                If the value written matches the ID of a job that is
                currently being canceled (for any reason),
                the printer responds with <noError>.  
                LJ8150 uses job ID's in the range of 0..32767.
                Because the ID number can wrap to zero,
                CURRENT-JOB-PARSING-ID may be smaller than the value
                written to this object; when this occurs, no error
                will result as long as the ID is for a currently
                processing job. This object is write only, so the
                comment in the general description stating the
                job ID or -1 will be returned on a read does not
                apply."
::= { settings-job 2 }
               
               
os-execute-file OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "This object's input is a null-terminated string representing a		
                fully-qualified path name for an executable file. This object		
                causes the file to be executed by the OS.
                Additional information:
                This object's input is a null-terminated string of two or
                more whitespace-separated tokens.  The first token is a path
                to a directory to make the current working directory.  The
                second token is a path to an executable file to be executed.
                Any remaining whitespace-separated tokens are optional and
                will be passed as parameters to the executable.  The paths 
                to the directory and executable can be either PJL style 
                (e.g., 1:\app\example) or UNIX-style (e.g., 
                /hpmnt/dsk_ide1a/app/example).  The executable is run in
                a separate process."
::= { operating-system 1 }
               
               
form-feed OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInitiateAction(1)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Instructs the PDL processing sub-system to finishing processing		
                the current page of the current job. Form feed is also known as		
                close page or eject page. If the PDL processing sub-system is		
                in a FORM-FEED-NEEDED state, this causes the device to flush or		
                finish processing the current page of the current job. If the		
                device is not in the FORM-FEED-NEEDED state, an		
                <genErr> will occur."
::= { settings-pdl 5 }
               
               
form-feed-needed OBJECT-TYPE
    SYNTAX  INTEGER {
		   eFalse(1),
		   eTrue(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates if the PDL processing sub-system has made marks on		
                the current page and the source subsystem has been idle for a		
                device specific amount of time.
                Additional information:
                LJ8150 will set this object to eTrue when it
                has made marks on the current page, the IO-TIMEOUT has
                expired while PCL was running in `backward-compatibility
                mode' (which is caused by jobs consisting purely of PCL
                data with no prepended PJL commands), and no data is pending
                on another I/O. Once it is set to eTrue, more data on the
                same I/O will cause this object to be set to eFalse, until
                the above conditions are met again."
::= { status-pdl 2 }
               
               
error-log-clear OBJECT-TYPE
    SYNTAX  INTEGER {
		   eClearErrorLog(1)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting this object clears all the entries in the error log		
                sub-tree.
                Additional information:
                Setting this object removes all errors that have been
                stored in the printer's non-volatile memory."
::= { status-system 38 }
               
               
clearable-warning OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOn(2),
		   eJob(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or controls how the device will track clearable		
                warnings. A clearable warning indicates a transient event in		
                the device. The device will continue after the transient event		
                occurs. If CLEARABLE-WARNING is eOff, the device does not track		
                clearable warnings. If CLEARABLE-WARNING is eOn, all clearable		
                warnings will be tracked until cleared (acknowledged). If		
                CLEARABLE-WARNING is eJob, a clearable warning generated due to		
                an event that occurs because of the print job being processed		
                will be automatically cleared when the device has finished		
                processing the job. Example clearable warning events include		
                the device altering resolution or page protection due to memory		
                constraints. The POS will document what transient events are		
                treated as clearable warnings.
                Additional information:
                If set to eOn, the warning is displayed until the GO key
                is pressed or the CONTINUE object is set.  
                
                If set to eJob, the warning is displayed until the end of the job in which
                it was generated."
::= { settings-job 1 }
               
               
error1-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 1		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                This item contains the engine
                page count when the error occurred.  
                
                If there is currently no error entry for this object, a '0' will be returned.
                Note that '0' may also be returned when there is a valid error, but a current
                page count was unavailable. If ERROR1-CODE object also returns '0', then
                an error has not yet been logged for this object.
                
                See ERROR1-CODE for an explanation of the order used for storing errors."
::= { error1 1 }
               
               
error1-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                Returns a device specific error code.
                If the error code returned is '0', then the printer has not yet logged an
                error for this object.
                When the maximum number of errors is reached (30 on LJ8150 printers), and
                a new error occurs, the error in ERROR1-CODE will be replaced by the
                one in ERROR2-CODE, and so on until the last error object will be given
                the value of the new error.  
                
                The error number is returned in the upper 16 bits.
                If it is 68, 69, 79, or 80, then the sub code is returned in the lower
                16 bits (eg. 68 001C, where the subcode is already a hexadecimal value).
                If the error number is any other number, then the 1st sub code (XX)
                will be in bits 15-8 and the 2nd sub code (YY) will be in bits 7-0 (eg.
                55.04.02) where XX=04 and YY=02).  
                
                                
                Example: If the error is 68 001A, then the value returned will be 4456474.  
                To break it down: 4456474 = 0x0044001A  
                The upper 16 bits: 0x0044 = 68  
                The lower 16 bits: 0x001A = 001A
                Which is the error: 68 001A  
                
                Example: If the error is 55.04.241, then the error code will be 3605745.  
                To break it down: 3605745 = 0x003704F1  
                The upper 16 bits: 0x0037 = 55  
                The upper byte of the lower 16 bits: 0x04 = 04  
                The lower byte of the lower 16 bits: 0xF1 = 241  
                Which is the error: 55.04.241"
::= { error1 2 }
               
               
error2-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 2		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error2 1 }
               
               
error2-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error2 2 }
               
               
error3-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 3		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error3 1 }
               
               
error3-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error3 2 }
               
               
error4-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 4		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error4 1 }
               
               
error4-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error4 2 }
               
               
error5-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 5		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error5 1 }
               
               
error5-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error5 2 }
               
               
error6-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 6		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error6 1 }
               
               
error6-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error6 2 }
               
               
error7-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 7		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error7 1 }
               
               
error7-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error7 2 }
               
               
error8-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 8		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error8 1 }
               
               
error8-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error8 2 }
               
               
error9-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 9		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error9 1 }
               
               
error9-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error9 2 }
               
               
error10-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 10		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error10 1 }
               
               
error10-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error10 2 }
               
               
error11-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 11		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error11 1 }
               
               
error11-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error11 2 }
               
               
error12-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 12		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error12 1 }
               
               
error12-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error12 2 }
               
               
error13-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 13		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error13 1 }
               
               
error13-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error13 2 }
               
               
error14-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 14		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error14 1 }
               
               
error14-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error14 2 }
               
               
error15-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 15		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error15 1 }
               
               
error15-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error15 2 }
               
               
error16-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 16		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error16 1 }
               
               
error16-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error16 2 }
               
               
error17-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 17		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error17 1 }
               
               
error17-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error17 2 }
               
               
error18-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 18		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error18 1 }
               
               
error18-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error18 2 }
               
               
error19-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 19		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error19 1 }
               
               
error19-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error19 2 }
               
               
error20-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 20		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error20 1 }
               
               
error20-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error20 2 }
               
               
error21-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 21		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error21 1 }
               
               
error21-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error21 2 }
               
               
error22-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 22		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error22 1 }
               
               
error22-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error22 2 }
               
               
error23-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 23		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error23 1 }
               
               
error23-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error23 2 }
               
               
error24-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 24		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error24 1 }
               
               
error24-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error24 2 }
               
               
error25-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 25		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error25 1 }
               
               
error25-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error25 2 }
               
               
error26-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 26		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error26 1 }
               
               
error26-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error26 2 }
               
               
error27-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 27		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error27 1 }
               
               
error27-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error27 2 }
               
               
error28-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 28		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error28 1 }
               
               
error28-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error28 2 }
               
               
error29-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 29		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error29 1 }
               
               
error29-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error29 2 }
               
               
error30-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 30		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error30 1 }
               
               
error30-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error30 2 }
               
               
error31-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 31		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error31 1 }
               
               
error31-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error31 2 }
               
               
error32-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 32		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error32 1 }
               
               
error32-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error32 2 }
               
               
error33-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 33		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error33 1 }
               
               
error33-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error33 2 }
               
               
error34-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 34		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error34 1 }
               
               
error34-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error34 2 }
               
               
error35-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 35		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error35 1 }
               
               
error35-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error35 2 }
               
               
error36-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 36		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error36 1 }
               
               
error36-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error36 2 }
               
               
error37-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 37		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error37 1 }
               
               
error37-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error37 2 }
               
               
error38-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 38		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error38 1 }
               
               
error38-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error38 2 }
               
               
error39-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 39		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error39 1 }
               
               
error39-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error39 2 }
               
               
error40-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 40		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error40 1 }
               
               
error40-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error40 2 }
               
               
error41-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 41		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error41 1 }
               
               
error41-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error41 2 }
               
               
error42-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 42		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error42 1 }
               
               
error42-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error42 2 }
               
               
error43-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 43		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error43 1 }
               
               
error43-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error43 2 }
               
               
error44-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 44		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error44 1 }
               
               
error44-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error44 2 }
               
               
error45-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 45		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error45 1 }
               
               
error45-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error45 2 }
               
               
error46-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 46		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error46 1 }
               
               
error46-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error46 2 }
               
               
error47-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 47		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error47 1 }
               
               
error47-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error47 2 }
               
               
error48-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 48		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error48 1 }
               
               
error48-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error48 2 }
               
               
error49-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 49		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error49 1 }
               
               
error49-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error49 2 }
               
               
error50-time-stamp OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains some sort of time stamp indicating when error 50		
                occurred. Example time stamps include the actual time the error		
                occurred (in seconds since Jan. 1, 1970), and the total engine		
                page count. The device POS documents the meaning of the time		
                stamp.
                Additional information:
                See ERROR1-TIME-STAMP."
::= { error50 1 }
               
               
error50-code OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains a device specific error code. Each device POS should		
                list what errors are logged to the error log and the meaning of		
                each supported error code value.
                Additional information:
                See ERROR1-CODE."
::= { error50 2 }
               
               
channelprinteralert OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Identifies the values of prtAlertIndex, prtAlertSeverityLevel,		
                prtAlertGroup, prtAlertGroupIndex, prtAlertLocation, and		
                prtAlertCode for the latest critical evnet in the		
                prtAlertTable. The binary string is defined as following:    	
                    <table>
                    -----------------------------------------------------
                    Field  | Filed  | Description 
                    Offset | Length | 
                    -----------------------------------------------------
                      0    |    4   | the value of prtAlertIndex
                      4    |    4   | the value of prtAlertSeverityLevel
                      8    |    4   | the value of prtAlertGroup
                     12    |    4   | the value of prtAlertGroupIndex
                     16    |    4   | the value of prtAlertLocation
                     20    |    4   | the value of prtAlertCode
                    ------------------------------------------------------
                    </table> 
                       	
                Each field is in Big Endian style.
                Additional information:
                This object is used to pass alert information from the
                peripheral to the IIO card.  The standard printer MIB
                contains the following description:  
                
                printerAlert TRAP-TYPE  
                ENTERPRISE printerV1Alert  
                VARIABLES { prtAlertIndex, prtAlertSeverityLevel, prtAlertGroup,
                prtAlertGroupIndex, prtAlertLocation, prtAlertCode }  
                DESCRIPTION  
                'This trap is sent whenever a critical event is added to the
                prtAlertTable.'  
                
                In order to provide this information in the trap packet, the
                IIO card enables traps on channelPrinterAlert.  When a critical
                alert is generated the peripheral fills the appropriate value
                into this object and sends it to the card.
                This object is a structure which contains 24 bytes of data.
                The structure is:  
                
                struct structAlertInfo {  
                sint32 prtAlertIndex;  
                sint32 prtAlertSeverityLevel;  
                sint32 prtAlertGroup;  
                sint32 prtAlertGroupIndex;  
                sint32 prtAlertLocation;  
                sint32 prtAlertCode;  
                } thisAlertData;"
::= { channel 2 }
               
               
install-date OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(13))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Identifies the date that the device was installed. The format		
                of the string is 'YYYYMMDDHHmmZ'. Where:    	
                    YYYY is the year.    	
                    MM is the month (1-12).    	
                    DD is the day (1-31).    	
                    HH is the hour of the day (0-23).    	
                    mm are the minutes (0-59).    	
                    'Z' designates Greenwich Mean Time; if 'Z' not specified,		
                        value is local time.    	
                Device POS must specify the conditions for setting this		
                object.
                Additional information:
                Setting the <blank> object will
                enable setting this object."
::= { status-system 8 }
               
               
timestamp OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(15))
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Sets the printer's current time in (UTC). The format of the		
                string is 'YYYYMMDDHHMMSS'. Where    	
                    YYYY is the year.    	
                    MM is the month (1-12)    	
                    DD is the day of the month (1-31)    	
                    HH is the hour of the day (0-23)    	
                    MM is the minutes (0-59)    	
                    SS is the seconds (0-59)    	
                Device POS must specify the conditions for setting this		
                object."
::= { status-system 13 }
               
               
service-id OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(5))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "A read of this object will return the current SERVICE ID value		
                in the printer. The format is 'YYDDD' where:    	
                    YY = calendar year - 1990    	
                    DDD = (calendar month - 1) * 30 + (calendar day of the		
                        month or 30, if > 30)    	
                If the write operation is not allowed, this object		
                will return an <genErr> status.
                Additional information."
::= { status-system 19 }
               
               
show-address OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eAuto(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "If this object is set to eAuto, and the device has an IP		
                address, the IP address of the device will be shown with the		
                READY message. If this object is set to eOff, the IP address		
                will not be shown."
::= { display-status 3 }
               
               
serial-number OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..10))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Identifies the serial number for the device. If the		
                SERIAL-NUMBER object is set by the user, then setting the		
                object does not need to be protected. If the SERIAL-NUMBER		
                object is set at the factory, then the <blank> object		
                must be set correctly before the SERIAL-NUMBER object is		
                writable. If this is a writable object, the POS should indicate		
                the maximum supported string length. If possible, encode the		
                serial number in a symbol set (like Roman-8) that matches the		
                ASCII character set and limit the characters used to ASCII		
                characters.
                Additional information:
                This value IS AFFECTED BY NVRAM resets, it is set to the 
                default value of XXXXXXXXXX, when a NVRAM init is done."
::= { id 3 }
               
               
fw-rom-datecode OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Identifies the base system firmware date code. The date code		
                will be encoded in the yyyymmdd format. There may be several		
                versions of the base system firmware. The date code associated		
                with the version of the base system firmware that is being used		
                is reported. There may be other date code objects for other		
                specific modules such as fonts, localization modules, etc.;		
                these other datecode objects are device specific."
::= { id 5 }
               
               
fw-rom-revision OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This identifies the system code firmware ROM revision code. The		
                format for a revision is major_revision.minor_revision. There		
                may be other ROM revision code objects for other specific ROMs		
                such as font ROMs, localization ROMs, etc; these other ROM		
                revision code objects are device specific."
::= { id 6 }
               
               
device-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..32))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "User defined device name. The POS should indicate the maximum		
                supported string length. If the user entered string is too		
                long, the device will store as much as possible and will return		
                the <OKNearestLegal ValueSubstituted>.Additional information:
                The maximum supported string length is 32  
                characters.  If the user entered string is too long, 
                the device will store the first 32 characters and will 
                return the <noError> status."
::= { id 10 }
               
               
device-location OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "User defined device location. The POS should indicate the		
                maximum supported string length. If the user entered string is		
                too long, the device will store as much as possible and will		
                return the <OKNearestLegal ValueSubstituted>.Additional information:
                The maximum supported string length is 16 
                characters.  If the user entered string is too long, 
                the device will store the first 16 characters and will 
                return the <noError> status."
::= { id 11 }
               
               
asset-number OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "User defined asset number. The POS should indicate the maximum		
                supported string length. If the user entered string is too		
                long, the device will store as much as possible and will return		
                the <OKNearestLegal ValueSubstituted>.Additional information:
                The maximum supported string length is 8 
                characters.  If the user entered string is too long, 
                the device will store the first 8 characters and will  
                return the <noError> status."
::= { id 12 }
               
               
default-copies OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes default copies. Default copies is the		
                default values used by the PDL to control the number of copies		
                of each page in the print job that are printed. The print job		
                can override this value. The list of supported values should be		
                documented in the device POS.
                Additional information:
                 The supported values are 1 through 32000.  
                	  Setting to an unsupported value causes the printer to substitute in a snap
                	  value and to return <noError> status.   
                	  The snaps are as follows:  
                		  <1 snaps to 1  
                		  >999 snaps to 32000"
::= { settings-pdl 4 }
               
               
default-lines-per-page OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the default number of lines per page. The		
                POS indicates the supported values. An unsupported value causes		
                the printer to use the closest supported value, causing the		
                printer to return the <noError>.
                Additional information:
                The supported values in LJ8150 are 5 to 128. 
                Setting to an unsupported value causes the  
                the printer to substitute in a snap value and to return 
                <noError> 
                status.   
                The snap values are as follow:   
                <5 snaps to 5   
                >128 snaps to 128"
::= { settings-pdl 11 }
               
               
default-vmi OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the default vertical motion index. The unit		
                of measure for VMI is centipoints per line. The POS indicates		
                the supported values. An unsupported value causes the printer		
                to use the closest supported value, causing the printer to		
                return <noError>."
::= { settings-pdl 12 }
               
               
default-media-size OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eROC16K(17),
		   eJISExecutive(18),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eJISB5(45),
		   eISOB5(65),
		   eFoolscap(10),
		   eJapanesePostcardDouble(72),
		   eMonarch(80),
		   eCommercial10(81),
		   eInternationalDL(90),
		   eInternationalC5(91),
		   eInternationalB5(100),
		   eCustom(101),
		   eUnknownMediaSize(32767)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This indicates the default media size. A write of an		
                unsupported value causes an <ErrorInvalidOrUnsupported Value>.		Complete list of supported media sizes along with their		
                dimensions are listed in the ''Media Size Table'' near the end		
                of this document. (for a full list of media size enums see the		
                end of this file) "
::= { settings-pdl 13 }
               
               
cold-reset-media-size OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSLetter(2),
		   eISOandJISA4(26)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the media size that is used as the		
                DEFAULT-MEDIA-SIZE when a cold reset occurs."
::= { settings-pdl 19 }
               
               
reprint OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2),
		   eAuto(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the reprint (jam recovery) setting. If eOn,		
                then the device will reprint pages jammed pages. If eOff, the		
                device will not attempt to reprint jammed pages. If eAuto, a		
                device dependent algorithm (which should be documented in the		
                POS) will be used to determine if the page gets reprinted. This		
                object controls all PDLs, unless a specific PDL supports its		
                own reprint control mechanism. To date, only PostScript has a		
                PDL reprint control mechanism."
::= { settings-pdl 36 }
               
               
pcl-total-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of PCL pages printed by the device.
                Additional information:
                In LJ8150 the PCL page count is kept in
                NVRAM, and the NVRAM value is updated at least every
                10 pages.  NOTE: The value returned by this object will
                be incremented every page but if power is lost between
                NVRAM updates, up to 9 pages of the page count may be
                lost.  The page count counter will be reset to zero
                after 16,777,215 (2^24-1) pages.  
                The page count is incremented when a sheet of media is pulled from an input
                tray. A duplex printed sheet will cause this counter to be incremented by
                two."
::= { pdl-pcl 5 }
               
               
pcl-default-font-height OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the default PCL height. Height is an		
                approximate measure of the body of the type in centipoints. A		
                centipoint is 1/7200 inch. Height applies only to proportional		
                fonts. Point size, in points, can be converted to font height,		
                in centipoints, by multiplying the point size by 100. The POS		
                indicates the supported values. An unsupported value causes the		
                printer to use the closest supported value, causing the printer		
                to return <noError>. ''Closest'' means		
                the smallest absolute difference.
                Additional information:
                Supported values range from 400 to 99975, in
                increments of 25 units.
                Setting to an unsupported value causes the 
                printer to substitute in a snap value and to 
                return <noError> status.   
                The snap values are as follow:   
                <=400 snaps to 400   
                >=99975 snaps to 99975   
                Unsupported values in the range 400 to 99975 snap
                DOWN to the previous supported value 
                (i.e 25293 snaps to 25275 or 75038 snaps to 75025)."
::= { pdl-pcl 13 }
               
               
pcl-default-font-source OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInternal(1),
		   ePermanentSoft(2),
		   eRomSimm2(11),
		   eRomSimm3(12),
		   eRomSimm4(13),
		   eRomSimm5(14)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the default font source		
                variable in NVRAM."
::= { pdl-pcl 14 }
               
               
pcl-default-font-number OBJECT-TYPE
    SYNTAX  INTEGER(0..255)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the default font number		
                variable in NVRAM. Writing an unsupported value causes the		
                printer to generate an <badValue>.
                Additional information:
                Valid numbers or 0 - 255, but only font numbers that are 
                included in the PCL FONT LIST are selectable."
::= { pdl-pcl 15 }
               
               
pcl-default-font-width OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the default PCL font width. Width is		
                expressed as the width of a character in centipoints. A		
                centipoint is 1/7200 inch. Width applies only to fixed space		
                fonts. Pitch, in character per inch, can be converted to font		
                width, in centipoints, by dividing 7200 by the pitch. The POS		
                indicates the supported values. An unsupported value causes the		
                printer to use the closest supported value, causing the printer		
                to return <noError>. ''Closest'' means		
                the smallest absolute difference.
                Additional information:
                Setting to an unsupported value causes the 
                printer to substitue in a snap value (listed below)
                and return <noError> status.   
                The snap values for pitch are as follow:   
                <=44 snaps to 44   
                >=9999 snaps to 9999"
::= { pdl-pcl 16 }
               
               
postscript-total-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of PostScript pages printed by the device.
                Additional information:
                This object is only supported if the PostScript
                option is installed.  
                In LJ8150 the count is kept in NVRAM, and the
                NVRAM value is updated at least every 10
                sheets.  NOTE: The value returned by this object will
                be incremented every sheet but if power is lost between
                NVRAM updates up to 9 sheets of the count may be
                lost.  The counter will be reset to zero
                after 16,777,215 (2^24-1) pages. "
::= { pdl-postscript 5 }
               
               
postscript-print-errors OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the print PostScript errors		
                setting. If eOn, PostScript prints an error page showing the		
                error encountered and the stack at the time of the error.
                Additional information:
                This object is only supported if the PostScript
                option is installed."
::= { pdl-postscript 11 }
               
               
pdf-version OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains version of PDF that is supported on the device."
::= { pdl-pdf 1 }
               
               
pdf-total-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of PDF pages printed by the device.
                Additional information:
                This object is only supported if the PDF option is installed.
                In LJ8150 the count is kept in NVRAM, and the NVRAM value is 
                updated at least every 10 sheets.  NOTE: The value returned 
                by this object will be incremented every sheet but if power 
                is lost between NVRAM updates up to 9 sheets of the count may
                be lost. The counter will be reset to zero after 16,777,215 
                (2^24-1) pages. A duplex printed sheet will cause this counter
                to be incremented by 2"
::= { pdl-pdf 2 }
               
               
pdf-enabled OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePDFNotEnabled(1),
		   ePDFEnabled(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Used to tell whether the device supports PDF."
::= { pdl-pdf 3 }
               
               
pdf-print-errors OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the print PDF errors setting.		
                If eOn, PDF prints an error page showing the error encountered		
                and the stack at the time of the error.
                Additional information:
                This object is only supported if the PDF option is installed."
::= { pdl-pdf 4 }
               
               
collated-originals-support OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates that the printer can create multiple, collated		
                'originals' of a job and shows the level of support for this		
                capability.    	
                    cCollatedOriginals - The printer can create multiple		
                        collated originals, or 'mopies'. This is the base		
                        functionality required by the other collection items.		
                           	
                    cProofAndHold - The printer saves a copy of the job while		
                        printing the first mopy. Later, this held job can be		
                        released and the rest of the mopies will print.    	
                    cSecurityPrint - The printer spools the job and holds the		
                        job until the user releases the job by entering a		
                        <blank>at the printer's control panel.    	
                    cAutoHighlight - The printer prints the job a number of		
                        times with a mail distribution list prepended to each		
                        job. A different mailing address is highlighted on each		
                        mopy.    	
                    cCollatedAtSpeed - The printer can create multiple collated		
                        copies where all copies after the original are printed		
                        at engine speed.   
                Additional information:
                Indicates that the printer can create multiple, collated   
                originals of a job and shows the level of support for this  
                capability.    
                cCollatedOriginals - The printer can create multiple collated  
                originals, or mopies.  
                
                This is the base functionality required by the other   
                collection items.    
                Without disk, this object will not exist. This will be set at   
                boot-up initialization. If the disk fails, in any way, then   
                the disk error functionality will handle the situation.
                
                A color printer (LJ4550) that only has a RAMDISK installed is 
                treated like there is no disk and therefore this object will 
                not exist.  
                
                The value of this object will be:
                !cCollatedOriginals - Only FLASH installed
                cCollatedOriginals  - IDE is installed combined
                with/without FLASH
                cCollatedOriginals  - RAMDISK is On combined with/without FLASH"
::= { status-system 42 }
               
               
host-application-available-memory OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the amount of memory, in bytes, that the device has		
                available for job-related processing or resources. Also known		
                as driver work space (DWS) memory."
::= { status-system 59 }
               
               
socket-ping-job-events-version OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..10))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object reports the current version of the Socket Ping Job		
                Events capability. The version number is returned as a string		
                in the format MAJOR.MINOR.SUB version. (eg. 1.0.1) If socket		
                ping is not supported by this printer then the object is either		
                not implemented or it returns a '0'."
::= { socket-ping 1 }
               
               
job-info-change-id OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(16))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the current value of an object in the job-info sub-tree		
                whose value has changed. Define the object identifier for the		
                object whose value has changed as		
                job-info.required-field.optional-field.job-id. job-info		
                represents the OID prefix of all objects in the job-info		
                sub-tree. Required-field represents the OID field value that		
                follows the job-info prefix. Since some objects in the job-info		
                sub-tree have two OID fields between the job-info prefix and		
                the job-id, the optional-field represents the OID field between		
                the required-field and the job-id field, if present. Using this		
                definition, the format for the JOB-INFO-CHANGE-ID binary value		
                can be described as follows:    	
                    Bytes 0-3 : required-field    	
                    Bytes 4-7 : optional-field, or all zeros if there    	
                    is no optional field    	
                    Bytes 8-11: Job ID.    	
                    Bytes 12-n : The value of the object job-info.		
                        required-field.optional-field.job-id.    	
                All multi-byte values stored in Motorola (big-endian) format,		
                where the most significant byte occurs first.
                Additional information:
                OZ will use this object to report
                changes to the job-info-pages-printed and job-info-state
                objects.  The required-field (bytes 0 through 3) will 
                designate whether the change to be reported involves the 
                pages printed (13) or job state (15).  The optional-field 
                (bytes 4 through 7) will always be zeroes.  The value-field
                (bytes 12 through 15) will contain the new value for pages
                printed or job state cast to a 32-bit integer.
                
                Note:  It is possible that traps generated by this object
                have the same value.  This is caused by the architecture of
                the Oz System.  In the Oz System, it is highly probable that
                the object value will change so rapidly that when the trap is
                processed, PML will read the same value twice.  This is timing
                related and will generally be seen at the end of a job."
::= { settings-job 3 }
               
               
hold-job-timeout OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The time, in minutes, that the printer will wait before		
                automatically deleting a held job. This allows the printer to		
                automatically clean up jobs that have been forgotten (held but		
                never released).
                Additional information:
                This only applies to temporary held jobs, i.e., HOLD=ON or
                PROOF.  This is a global timer that only affects the jobs
                that are sent after it is set.
                		A value of 0 means never delete the jobs.
                		Setting it to an unsupported value causes
                		the printer to substitute a value (listed
                		below) and to return <noError>
                		status.  
                		LJ4050 supports values of 0, 60, 240, 1440, and 10080   
                		The values are as follows:  
                <=0 snap to 0   (disabled)  
                >=1 and <=150 snap to 60 (60 minutes)  
                >=151 and <=840 snap to 240 (4 hours)  
                >=841 and <=2880 snap to 1440 (1 day)  
                >=2881 snap to 10080  (1 week)"
::= { settings-job 10 }
               
               
current-job-parsing-id OBJECT-TYPE
    SYNTAX  INTEGER(-1..2147483647)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the printer assigned job identification for the job		
                currently being processed by the processing PDL sub-system. The		
                job ID is a monotonically increasing number. The job ID may be		
                reset to zero at power-up and may roll over to zero after		
                reaching some maximum value.
                Additional information:
                A value of -1 is returned when the printer
                is not parsing a job.  
                
                When data for a new job is detected, this object is
                updated (the job may or may not turn out to be a Null
                Job); however, the trap does not occur until the printer
                determines that it is not a Null Job.  (A job is considered
                to be a 'null job' if it has no name or job attribute, 
                causes no pages to be printed, and consumes MIN_JOB_SIZE
                (9) or fewer bytes.)  A trapped value will differ from 
                the previous value by one or more.  
                
                Some job-info- objects are created when the first data
                bytes are received.  If the printer determines that the
                job is a Null Job, the job-info- objects related to the
                Null Job are deleted.  OZ retains the job-info-
                objects for the MAX_JOBS_IN_LIST (32) most recent jobs 
                that are not Null Jobs.  
                
                The first job received after power-up will have job ID 1,
                and the job ID will increment to 2,147,483,647 before 
                rolling to zero.  To distinguish whether a power cycle or a 
                rollover causes a reduction in the job ID value, the 
                object prtGeneralConfigChanges can be watched and if it 
                increments at the same time as the drop is observed in
                the value of CURRENT-JOB-PARSING-ID, then a power cycle
                is the most likely cause."
::= { job-being-parsed 1 }
               
               
job-info-name1 OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the first part of this print job's name. The last OID		
                field for this dynamic object contains the job ID.
                Additional information:
                The job name is the string specified by the
                NAME= parameter of the @PJL JOB command which allows a
                maximum of 80 characters.  The first 40 characters are
                in this object and the second 40 are in job-info-name2.
                The symbol set is Roman-8.  
                
                When jobs are nested, the value assigned to this object
                is the name provided by the most recent @PJL JOB NAME=
                command.  If no name is provided, a null string is
                returned."
::= { job-info 1 }
               
               
job-info-name2 OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the second part of this print job's name. The last OID		
                field for this dynamic object contains the job ID.
                Additional information:
                See job-info-name1."
::= { job-info 2 }
               
               
job-info-stage OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates what printer sub-systems are currently processing		
                this print job. The last OID field for this dynamic object		
                contains the job ID. cSourceSubsystem - some of the job is in		
                the printer I/O subsystem. cProcessingSubsystem - some of the		
                job is in the printer imaging processing subsystem.		
                cDestinationSubsystem - some of the job is being printed.
                Additional information:
                For OZ, cSourceSubsystem and
                cProcessingSubsystem will always be set and cleared
                together.  They are set when the beginning of the
                job is detected, and they are cleared when the end
                of the job is parsed.  
                
                A non-printing job will never set
                cDestinationSubsystem.  
                
                When a page is ready to be printed (the intermediate has
                been built and the page is `closed' by the personality), 
                cDestinationSubsystem will be set even if a page of a 
                previous job is currently being printed.
                cDestinationSubsystem remains set until the last page of
                the job has finished printing.  
                
                If a page requires extensive processing and allows all
                the previous pages of a job to complete printing,
                cDestinationSubsystem will remain set until the last
                page of the job has finished printing."
::= { job-info 10 }
               
               
job-info-io-source OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates which I/O source, the print job was received over.		
                The value maps to port numbering scheme supported in the		
                DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree."
::= { job-info 11 }
               
               
job-info-pages-processed OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the number of pages processed by the processing		
                subsystem. If neither the cSourceSubsystem or the		
                cProcessingSubsystem items are in the associated JOB-INFO-STAGE		
                object, then this object contains the total number of pages		
                processed for this job. The last OID field for this dynamic		
                object contains the job ID.
                Additional information:
                This object is incremented by one when a
                page is processed (`closed' by the personality), regardless 
                of the number of pages that are printed as a result of the 
                single page processed.  In other words, it does not matter 
                how many identical copies of a page are printed or no pages
                may be printed if operating in silent run mode, this count
                is incremented exactly once.  
                
                A page is considered processed when all of the input
                data has been processed for a page (that is, when the 
                intermediate has been produced, and the personality has 
                `closed' the page.  At this time, the image of the page is 
                not necessarily completely formed.)"
::= { job-info 12 }
               
               
job-info-pages-printed OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the number of pages printed by the destination		
                subsystem. If none of the cSourceSubsystem,		
                cProcessingSubsystem or cDestinationSubsystem items are in the		
                associated JOB-INFO-STAGE object, then this object contains the		
                total number of pages printed for this job. This value may		
                increase by two each time for duplex jobs. The last OID field		
                for this dynamic object contains the job ID.
                Additional information:
                If multiple copies of a page are printed,
                each copy is counted individually."
::= { job-info 13 }
               
               
job-info-size OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the number of bytes of data processed by the		
                processing subsystem. If neither of the cSourceSubsystem or		
                cProcessingSubsystem items are in the associated JOB-INFO-STAGE		
                object, then this object contains the size of this job, in		
                bytes. The last OID field for this dynamic object contains the		
                job ID.
                Additional information:
                This count may be incremented by values
                other than one as blocks of data are processed; blocks
                of data (which may be as large as 2K bytes) will be
                processed in a varying amount of time.  
                
                During the processing of a job and even when a job completes, 
                an exact count of the number of I/O bytes processed by the
                job is not necessarily to be expected."
::= { job-info 14 }
               
               
job-info-state OBJECT-TYPE
    SYNTAX  INTEGER {
		   eAborted(3),
		   eWaitingForResources(4),
		   ePrinted(5),
		   eTerminating(7),
		   eCancelled(10),
		   eProcessing(11),
		   eScanning(12),
		   eSending(13)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the state of the job. The last OID field for this		
                dynamic object contains the job ID.    	
                    eAborted - the print job was aborted.    	
                    eWaitingForResources - the print job requires resources		
                        that are not currently available. Example resources		
                        that can cause the job to wait include the print engine		
                        or PDL processor being unavailable. The print engine		
                        could be unavailable due to paper out, paper jam,		
                        staple out, stapler jam, marking agent low, output bin		
                        full, etc. The PDL processor could be unavailable due		
                        to an off-line condition. Each printer specific object		
                        specification should state which conditions cause a job		
                        to be waiting for resources and also state which		
                        objects can be retrieved by an application to determine		
                        the exact cause of a resource being unavailable.    	
                    ePrinted - the job has printed. The related JOB-INFO-		
                        OUTCOME object indicates if any problems were		
                        encountered while the job was processed.    	
                    eRetained - the job can be reprinted.    	
                    eTerminating - the job was aborted or cancelled and is		
                        currently is terminating.    	
                    eInterrupted - the job has been interrupted. The job can be		
                        continued.    	
                    ePaused - the job has been paused. The job can be		
                        continuted.    	
                    eCancelled - the job has been cancelled.    	
                    eProcessing - the job is currently being printed normally.		
                          "
::= { job-info 15 }
               
               
job-info-outcome OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOk(3)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates if any warning or error conditions were encountered		
                while processing the assoicated job. The last OID field for		
                this dynamic object contains the job ID.
                Additional information:
                In OZ, warnings and errors are not recorded
                in this object.  Although no meaningful information can be
                obtained from this object, it is kept around for the
                compatibility needs of existing software."
::= { job-info 19 }
               
               
job-info-outbins-used OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates which output bins this job has delivered printed		
                pages to. The last OID field for this dynamic object contains		
                the job ID.
                Additional information:
                The bins designated by this collection include
                the printer's own output bins as well as the `logical output
                bins' associated with any attached external paper handling
                devices.  (The mapping of the physical output bins of an
                external paper handling device to its `logical output bins'
                depends on the usage mode of the device.  For instance, in
                `mailbox mode', there is one-to-one correspondence of
                `logical output bins' to physical bins, whereas in `stacker
                mode', one `logical output bin' may map to several physical
                bins.)  
                
                Although LJ4100 and LJ4550 both come with two output
                bins -- a face-down bin on the top of the device and a
                face-up bin at the back of the device -- firmware will not
                provide a means of selecting between the two, nor will it
                report which of the two gets used.  For this reason, bit 0
                (cOutbin1) of this collection is being used to designate
                both of these bins together."
::= { job-info 20 }
               
               
job-info-settings-vertical-resolution OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the vertical resolution used when the job was		
                printed. See DEFAULT-VERTICAL-BLACK-RESOLUTION."
::= { job-info-job-settings 2 }
               
               
job-info-settings-horizontal-resolution OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the horizontal resolution used when the job was		
                printed. See DEFAULT-HORIZONTAL-BLACK-RESOLUTION."
::= { job-info-job-settings 3 }
               
               
job-info-settings-orientation OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePortrait(1),
		   eLandscape(2),
		   eReversePostrait(3),
		   eReverseLandscape(4)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the orentation setting used when the job was printed.		
                See DEFAULT-ORIENTATION."
::= { job-info-job-settings 5 }
               
               
job-info-settings-economode OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the value for the ECONOMODE variable which indicates		
                the user's intent for the toner-saving mode. There are two		
                options:    	
                    OFF: ECONOMODE is off and the job is printing normally.    	
                    ON: ECONOMODE is on and the job is pringed with toner		
                        saving.   "
::= { job-info-job-settings 11 }
               
               
job-info-physical-outbins-used OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates which physical output bins this job has delivered		
                printed pages to. The last OID field for this dynamic object		
                contains the job ID.
                Additional information:
                The output bins designated by the bits of
                this collection include the standard output bin(s) plus the
                physical bins of attached external paper handling devices.
                The configuration (if any) of external paper handling devices
                will determine the mapping of individual bits in this
                collection to the physical bins of the devices.
                For Lj4100 and LJ4550, the cOutbin1 is used for Face Down
                bin, cOutbin2 is used for Face Up bin, and 3-15 are used for
                the 13 optional output bins (12 plus an extension to the Face
                Up bin) for backwards compatibility with Lj8000/LJ8100 and
                forwards compatibility with LJ8150.  However, since they
                cannot distinguish output going to the Face Up or Face Down
                bin in the firmware because the diverter can only be moved
                manually, bit 0 (cOutbin1) is being used to designate
                both of these bits together.  If an external paper handling
                output device is connected, then bit 2 (cOutbin3) will
                represent the device's first output bin (and so on)."
::= { job-info 22 }
               
               
job-info-attr-1 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. Attribute objects are saved sequentially, starting		
                with 1, after the start of a job. If more attributes are set		
                than there are objects to store them, the excess JOBATTR values		
                are ignored. If the corresponding SET JOBATTR= command has not		
                been received when a get is done for this object, a status of		
                <noSuchName> will be returned."
::= { job-info-attribute 1 }
               
               
job-info-attr-2 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 2 }
               
               
job-info-attr-3 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 3 }
               
               
job-info-attr-4 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 4 }
               
               
job-info-attr-5 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 5 }
               
               
job-info-attr-6 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 6 }
               
               
job-info-attr-7 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 7 }
               
               
job-info-attr-8 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 8 }
               
               
job-info-attr-9 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 9 }
               
               
job-info-attr-10 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 10 }
               
               
job-info-attr-11 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 11 }
               
               
job-info-attr-12 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 12 }
               
               
job-info-attr-13 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 13 }
               
               
job-info-attr-14 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 14 }
               
               
job-info-attr-15 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 15 }
               
               
job-info-attr-16 OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(1..80))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the value that was set in PJL via the SET JOBATTR=		
                command. See JOB-INFO-ATTR-1 for details."
::= { job-info-attribute 16 }
               
               
job-info-requested-originals OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The number of requested collated copies. The value was supplied		
                with the job via PJL QTY variable, the PostScript Collate and		
                NumCopies entries in the page device dictionary, or via some		
                other mechansim."
::= { job-info 24 }
               
               
job-info-page-count-current-original OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The page number being printed within the current copy of a		
                collated multi-copy job. This value changes when the		
                job-info-pages-printed changes. The job-info-pages-printed		
                indicates the total number of pages printed in the job, while		
                this object indicates the number of pages printed for this copy		
                of a collated multi-copy job.
                Additional information:
                The number of pages in the current copy of a collated
                multi-copy job which have been completely printed and
                safely delivered to the output bin."
::= { job-info 25 }
               
               
job-info-pages-in-original OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of pages in a single copy of a collated multi-copy job."
::= { job-info 26 }
               
               
job-info-printed-originals OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of collated copies completely printed and delivered to		
                the output bin at time of query."
::= { job-info 27 }
               
               
job-info-accounting-media-size OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eLedger(11),
		   eROC16K(17),
		   eJISExecutive(18),
		   eROC8K(19),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eISOandJISA3(27),
		   eJISB5(45),
		   eJISB4(46),
		   eISOB5(65),
		   eJapansePostcardDouble(72),
		   eMonarch(80),
		   eCommercial10(81),
		   eInternationalDL(90),
		   eInternationalC5(91),
		   eInternationalB5(100),
		   eCustom(101),
		   eUSLetterR(258),
		   eISOandJISA4R(282),
		   eUnknownMediaSize(32767)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the media size of the printed job. The media size of		
                the first page will decide the media size of the entire job.		
                The return value of this object will only be valid when the		
                printer finishes printing the entire job."
::= { job-info-accounting 1 }
               
               
job-info-accounting-media-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUnknownMedia(1),
		   eStandardType(2),
		   ePreprinted(3),
		   eBond(4),
		   eLetterhead(5),
		   eTransparency(7),
		   eLabels(8),
		   eRecycled(9),
		   eColored(10),
		   eCardStock(11),
		   eRough(12),
		   ePrepunched(13),
		   eHeavy(14),
		   eUserType1(16),
		   eUserType2(17),
		   eUserType3(18),
		   eUserType4(19),
		   eUserType5(20)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the media type of the printed job. The media type of		
                the first page will decide the media type of the entire job.		
                The return value of this object will only be valid when the		
                printer finishes printing the entire job."
::= { job-info-accounting 2 }
               
               
job-info-accounting-finishing-options OBJECT-TYPE
    SYNTAX  INTEGER {
		   eNoFinish(1),
		   eOffset(2),
		   ePunch(3),
		   eStapler(4),
		   eFinisher(5)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the finishing option used on the printed job. The		
                finishing option specified for the first page will decide the		
                finishing option of the entire job. The return value of this		
                object will only be valid when the printer finishes printing		
                the entire job."
::= { job-info-accounting 3 }
               
               
job-info-accounting-media-simplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of simplex pages printed in a		
                particular job."
::= { job-info-accounting 4 }
               
               
job-info-accounting-media-duplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of duplex pages printed in a		
                particular job."
::= { job-info-accounting 5 }
               
               
job-info-accounting-grayscale-impression-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of monochrome pages printed in a		
                particular job."
::= { job-info-accounting 6 }
               
               
job-info-accounting-color-impression-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of color pages printed in a		
                particular job."
::= { job-info-accounting 7 }
               
               
job-info-accounting-black-dots OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of black pixels used in a particular		
                job.
                Additional information:
                This object reports kilodots.  (A kilodot
                is 1000 dots.)"
::= { job-info-accounting 8 }
               
               
job-info-accounting-yellow-dots OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of yellow pixels used in a particular		
                job.
                Additional information:
                This object reports kilodots.  (A kilodot
                is 1000 dots.)"
::= { job-info-accounting 9 }
               
               
job-info-accounting-cyan-dots OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of cyan pixels used in a particular		
                job.
                Additional information:
                This object reports kilodots.  (A kilodot
                is 1000 dots.)"
::= { job-info-accounting 10 }
               
               
job-info-accounting-magenta-dots OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Contains the total number of magenta pixels used in a		
                particular job.
                Additional information:
                This object reports kilodots.  (A kilodot
                is 1000 dots.)"
::= { job-info-accounting 11 }
               
               
job-info-accounting-job-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePrintJob(1),
		   eIPPJob(2),
		   eCopyJob(3),
		   eCopyInterruptJob(4),
		   eJetSendJob(5),
		   eInternalPage(6),
		   eCleaningPage(7),
		   eAutoCleaningPage(8),
		   eDigitalSendJob(9),
		   eWebPrintJob(10),
		   eFAXPrintJob(11),
		   eRetrievedJob(12),
		   ePhotoCardPrintJob(13),
		   eUnknownJob(1000)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Keeps track of what type of job is processed. "
::= { job-info-accounting 14 }
               
               
job-info-accounting-language OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePJL(1),
		   ePostscript(2),
		   eMixed(3),
		   ePCL5(4),
		   ePCL6(5),
		   ePDF(6),
		   eIPDS(7),
		   eXHTML(8),
		   eOther(9)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the personality laguage used to process the given		
                job. The values are:    	
                    ePJL: The job contained only PJL directives and no other		
                        language was used to parse the job.    	
                    ePostscript: The Postscript interpreter was used to process		
                        this job.    	
                    eMixed: More than one language was used to parse the job.		
                        (This is generally not possible with drivers, but		
                        certain hand-coded jobs do this.)    	
                    ePCL5: The PCL interpreter was used to process this job.   	                         
                    ePCL6: The PCL-XL interpreter was used to process this job.		
                           	
                    eIPDS: The IPDS interpreter was used to process this job.		
                           	
                    eXHTML: The XHTML interpreter was used to process this job.		
                           	
                    eOther: Some other (unknown) interpreter was used to		
                        process this job.   "
::= { job-info-accounting 30 }
               
               
job-info-accounting-source-trays-used OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The input trays designated by the bits of this collection		
                indicate which input trays were used by the given job."
::= { job-info-accounting 31 }
               
               
held-job-user-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "User name that is obtained by the driver through some internal		
                method or from user input.
                Additional information:
                The following is a general description for all the JOB-MANAGEMENT
                objects described below.  These object describe the attributes of the
                dynamic list containing all the stored jobs on the disk available for
                printing or deleting via the job-management feature.  The jobs on this
                list are not deleted from the disk unless explicitly specified by the
                user.  A print job may be specified for retention by PJL commands in the
                data stream.
                
                Following is a list of the PJL commands (i.e. these comments describe 
                the PJL implementation and in some cases do not reflect the PML 
                implementation.):
                
                @PJL SET HOLD=OFF|ON|PROOF|STORE|PRINT
                
                GENERAL DESCRIPTION: 
                
                This variable specifies the retention classification of the job.  The
                values indicate whether the job is printed immediately and/or stored.
                
                OFF:  The job is printed but not retained on disk after printing.  This
                is the default value.
                
                ON:  This setting may be thought of as free proof-and-hold.  The
                requested number of copies will be printed and the job will be
                temporarily stored on disk.  The job will then be available for printing
                additional copies through the control panel and through PML.  There will
                be a limit to the number of these temporary jobs that may be stored, and
                when the limit is exceeded the oldest job will be removed from the disk.
                
                PROOF:  One copy of the job is printed and remaining copies are stored
                on disk.  The job is then available to select for printing via the
                control panel menus or PML.  The job will be deleted from the disk when
                the disk space is needed for another proof and hold job but only after
                the additional copies have been printed.  It will also be deleted when
                the user sends down another proof and hold job with the same job name,
                or the user explicitly deletes the job.
                
                STORE:  The job is not printed immediately but is retained on disk.  The
                job is available to select for printing via the control panel
                
                DEFAULT VALUE: OFF
                
                The value will be stored in RAM only, not in NVRAM.
                The legal PJL commands are SET and INQUIRE.  DEFAULT is not allowed.
                The variable will appear in the PJL INFO VARIABLES list.
                
                @PJL SET USERNAME=<80 bytes>
                
                GENERAL DESCRIPTION: 
                
                Eighty-character user name that is obtained by the driver through some
                internal method or from user input.  If the job stream does not contain
                a USERNAME the default value will be NO USER NAME.  The driver is
                responsible for determining the size of the printers control panel and
                sending a string of appropriate length.
                
                DEFAULT VALUE: NO USER NAME
                
                The value will be stored in RAM only, not in NVRAM.
                The legal PJL commands are SET and, INQUIRE. DEFAULT is not allowed.
                The variable will appear in the PJL INFO VARIABLES list.
                
                @PJL SET JOBNAME=<80 bytes>
                
                GENERAL DESCRIPTION:
                
                Eighty-character job name that may be generated by the driver or
                obtained from user input.  This value may be used in conjunction with
                the USERNAME to select a job from the front panel.  If the job stream
                does not contain a JOBNAME, the printer will assume no job name; each
                subsequent job that is sent down by the same user would replace the
                users last job on disk.  The driver is responsible for determining the
                size of the printers control panel and sending a string of appropriate
                length.
                
                NOTE:  The limit of 80 bytes is a PJL limit.  The limit for PML will
                be 40 bytes.
                
                DEFAULT VALUE: NULL STRING
                
                The value will be stored in RAM only, not in NVRAM.
                The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
                The variable will appear in the PJL INFO VARIABLES list.
                
                @PJL SET HOLDTYPE=PUBLIC|PRIVATE
                
                GENERAL DESCRIPTION:
                
                This variable specifies the privacy level of the job.
                
                PUBLIC:  The job does not require a PIN in order to be released for
                printing.  This is the default value.
                
                PRIVATE:  The job requires a PIN in order to be released for printing.
                The PIN is specified by the HOLDKEY variable.  If the
                
                HOLDTYPE is set to PRIVATE, a HOLDKEY value must be specified.  If no
                HOLDKEY is specified, the job will be considered PUBLIC.
                
                DEFAULT VALUE: PUBLIC
                
                The value will be stored in RAM only, not in NVRAM.
                The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
                The variable will appear in the PJL INFO VARIABLES list.
                
                @PJL SET HOLDKEY=4 digits, 0000...9999
                
                GENERAL DESCRIPTION:
                
                A 4-digit string, each digit 0-9, that is specified in the job stream
                and then required to be entered in order to release the job for
                printing.  If a HOLDTYPE is PRIVATE, a HOLDKEY value must be specified.
                If no HOLDKEY value is specified, a job will be considered PUBLIC.
                
                DEFAULT VALUE: NULL STRING
                
                The value will be stored in RAM only, not in NVRAM.
                The legal PJL commands are SET and INQUIRE. DEFAULT is not allowed.
                The variable will appear in the PJL INFO VARIABLES list.
                
                
                The format for the OID is as follows:
                
                3.4.1.6.x.y
                <-----> | |
                |    |  \
                /     |  job-id in the system
                /       \   
                PML_JOB_MGNT_ROOT_OID  \
                job attribute 1..6
                
                x values are 1..6:
                
                1) user-name:  user name that is obtained by the driver through some
                internal method or from user input.
                
                2) job-name:  job name may be generated by the driver or obtained from
                user input.
                
                3) hold:  indicates the retention classification of the job.  The values
                indicate whether the job is printed immediately and/or stored.  There
                are 4 options:
                OFF:    The job is printed but not retained on the disk.
                ON:     The job is printed and stored temporarily on the disk.
                STORE:  The job is not printed but stored on the disk.
                PROOF:  One copy of the job is printed and the remaining copies are
                stored on the disk.
                
                4) holdtype:  The variable specifies the security level of the job.
                PUBLIC:  The job does not require a PIN in order to release the job for
                printing.
                PRIVATE:  The job requires a PIN in order to be released for printing.
                
                5) quantity:  number of copies to print.  Valid values are 0..999.
                
                6) pin:  A 4 digit string, each digit is 0-9, that is specified in the
                job stream and then required to be entered in order to release the job
                for printing.
                
                y :  an unsigned 32-bit number which uniquely identifies the job.  The job
                id for the job remains the same for the job until it is deleted from the
                held jobs list.
                
                
                For example, the OID below is asking for the user name of the
                job whose id is 3.  The application would issue:
                
                OID    
                get 3.4.1.6.1.3
                
                For example, the <getnext> OID values sequence is as follows:
                
                OID                returned OID
                getnext 3.4.1.6         3.4.1.6.1.1
                getnext 3.4.1.6.1.1     3.4.1.6.1.2
                getnext 3.4.1.6.2.1     3.4.1.6.2.2
                ***
                getnext 3.4.1.6.1.6     3.4.1.6.1.7
                getnext 3.4.1.6.2.1     3.4.1.6.2.2
                getnext 3.4.1.6.5.2828  3.4.1.6.6.1 
                
                NOTE: for example above, job id 2828 is the last job in the list of
                held jobs.
                ***
                
                Also supported is <getnext> on the job attributes:
                OID                returned OID
                getnext 3.4.1.6.1       3.4.1.6.1.1
                getnext 3.4.1.6.6       3.4.1.6.6.1"
::= { held-job-info 1 }
               
               
held-job-job-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The job name may be generated by the driver or obtained from		
                user input."
::= { held-job-info 2 }
               
               
held-job-retention OBJECT-TYPE
    SYNTAX  INTEGER {
		   eHoldOff(1),
		   eHoldOn(2),
		   eHoldStore(3),
		   eHoldProof(4)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the retention classification of the job. The values		
                indicate whether the job is printed immediately or stored.		
                There are 4 options:    	
                    eHoldOff: The job is printed but not retained on the disk.		
                           	
                    eHoldOn: The job is printed and stored temporarily on the		
                        disk.    	
                    eHoldStore: The job is not printed but stored on the disk.		
                           	
                    eHoldProof: One copy of the job is printed and the		
                        remaining copies are stored on the disk.   "
::= { held-job-info 3 }
               
               
held-job-security OBJECT-TYPE
    SYNTAX  INTEGER {
		   eHoldTypePublic(1),
		   eHoldTypePrivate(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The variable specifies the security level of the job.    	
                    eHoldTypePublic: The job does not require a PIN in order to		
                        release the job for printing.    	
                    eHoldTypePrivate: The job requires a PIN in order to be		
                        released for printing.   "
::= { held-job-info 4 }
               
               
held-job-quantity OBJECT-TYPE
    SYNTAX  INTEGER(1..999)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of copies to print."
::= { held-job-info 5 }
               
               
held-job-pin OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..4))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "A string that is specified in the job stream and then required		
                to be entered in order to release the job for printing. PIN		
                stands for Personal Identification Number.
                Additional information:
                Must be a 4 digit string, each digit must be 0..9 or a null string
                if there is no pin.
                		For security purposes, you can no longer get the value of the PIN."
::= { held-job-info 6 }
               
               
held-job-print OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE(12))
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Instructs the printer to schedule the specified held job for		
                printing with the specified number of copies. The job-id is		
                used to identify which job to print. A held job can also be		
                printed from the control panel.
                Additional information:
                Bytes 0-3 is the job id of the job to print.
                Bytes 4-7 is the number of copies to print.
                Bytes 8-11 (optional) contain the PIN for
                a Private job. "
::= { held-job-control 1 }
               
               
held-job-delete OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Instructs the printer to delete the specified held job from the		
                list. The job-id is used to identify which job to delete. A		
                held job can also be deleted from the control panel.
                Additional information:
                Setting this to a value that is not a Held Job on the
                system or is a Private Held Job returns <ErrUnsupValue>.
                To delete a private Held Job, you must use the PML object
                HELD-JOB-PRINT with a quantity of 0 and supply the correct
                HELD-JOB-PIN with the request. (See HELD-JOB-PRINT)"
::= { held-job-control 2 }
               
               
held-job-set-queue-size OBJECT-TYPE
    SYNTAX  INTEGER(0..100)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Sets the maximum number of jobs which can be stored in the held		
                job list.
                Additional information:
                Sets the size of the temporary job lists queue."
::= { held-job-control 3 }
               
               
held-job-enable OBJECT-TYPE
    SYNTAX  INTEGER {
		   eDisabled(1),
		   eEnabled(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Enables or disables Job Retention (Job Hold). The valid values		
                are eDisabled and eEnabled. (Specifying an invalid mode causes		
                an <badValue> error to be returned.) When		
                eDisabled is specified all Job Retention (Hold, Proof, Store,		
                PIN Printing) is disabled. When eEnabled is specified, the Job		
                Retention characteristics of a given job are defined by the PJL		
                variable SET HOLD.
                Additional information:
                When disabled, held jobs are not removed,
                but must be explicitly removed through the Control Panel
                or the PML object HELD-JOB-DELETE."
::= { held-job-control 4 }
               
               
mopy-mode OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eStandard(4),
		   eEnhanced(5)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Controls or reports how mopies are generated. eOff turns off		
                the mopy feature. eAuto allows the device to determine the best		
                method for generating mopies based on the device configuration.		
                eStandard spools the I/O data and replays the I/O data multiple		
                times to generate the mopies. eEnhanced spools the rasterized		
                page images and replays the rasterized data to generate the		
                mopies. Typically, the rasterized data will be larger and will		
                allow all but the first mopy to print at speed. If the job		
                being mopied is not extremely complex, then the first mopy will		
                print at speed also."
::= { settings-spooler 1 }
               
               
default-vertical-black-resolution OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the default vertical black		
                resolution. The units are dots per inch.
                Additional information:
                In OZ changing this OID also causes
                DEFAULT-HORIZONTAL-BLACK RESOLUTION to change.
                DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
                DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
                same.  The supported values are:
                LJ4100: 300, 600, 1200
                Color Products: 600
                LJ9000: 300, 600   
                Setting to an unsupported value causes the printer
                to substitute in a snap value and
                to return <noError> status.  
                The snap values are as follow:  
                Lj4100:  
                
                450 >= n < 900 snaps to 600  
                n >= 900 snaps to 1200   
                Color Products:  
                n snaps to 600
                LJ9000:  
                n < 450 snaps to 300  
                n >=450 snaps to 600  "
::= { settings-pdl 8 }
               
               
default-horizontal-black-resolution OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the value of the default horizontal black		
                resolution. The units are dots per inch.
                Additional information:
                In OZ changing this object also causes
                DEFAULT-VERTICAL-BLACK RESOLUTION to change.
                DEFAULT-HORIZONTAL-BLACK-RESOLUTION and
                DEFAULT-VERTICAL-BLACK-RESOLUTION must always be the
                same.  The supported values are:
                LJ4100: 300, 600, 1200
                Color Products: 600
                LJ9000: 300, 600   
                Setting to an unsupported value causes the printer
                to substitute in a snap value and to
                return <noError> status.  
                The snap values are as follow:  
                Lj4100:  
                n < 450 snaps to 300  
                450 >= n < 900 snaps to 600  
                n >= 900 snaps to 1200   
                Color Products:  
                n snaps to 600
                LJ9000:  
                n < 450 snaps to 300  
                n >=450 snaps to 600  "
::= { settings-pdl 9 }
               
               
default-page-protect OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the default page protection behavior. If		
                eOff, the device does not reserve memory for holding the entire		
                raster form of a processed page. If eOn, then memory is		
                reserved. If eAuto, the device determines the amount of memory		
                to reserve.
                Additional information:
                Setting to eOn causes MET to be more conservative, but
                it will not allocate memory to hold an entire
                rasterized page."
::= { settings-pdl 10 }
               
               
default-bits-per-pixel OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Controls the number of levels used (per pixel) when printing		
                grayscale or color images."
::= { settings-pdl 39 }
               
               
mio1-model-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns product information identifying the I/O card. Example:		
                XXXX."
::= { mio1 2 }
               
               
mio1-manufacturing-info OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns information describing the manufacture of the I/O card		
                installed in MIO/EIO slot 1. May include serial number and		
                firmware revision.
                Additional information:
                The format of the string returned is determined by
                the manufacturer of the EIO device. There is no standard for 
                content of the string."
::= { mio1 3 }
               
               
mio1-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eDiskDrive(8),
		   eIOCard(12)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in		
                MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the		
                enumerations."
::= { mio1 4 }
               
               
mio2-model-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns product information identifying the I/O card. Example:		
                XXXX."
::= { mio2 2 }
               
               
mio2-manufacturing-info OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns information describing the manufacture of the I/O card		
                installed in MIO/EIO slot 2. May include serial number and		
                firmware revision.
                Additional information:
                The format of the string returned is determined by
                the manufacturer of the EIO device. There is no standard for 
                content of the string."
::= { mio2 3 }
               
               
mio2-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eDiskDrive(8),
		   eIOCard(12)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in		
                MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the		
                enumerations."
::= { mio2 4 }
               
               
mio3-model-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns product information identifying the I/O card. Example:		
                XXXX."
::= { mio3 2 }
               
               
mio3-manufacturing-info OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns information describing the manufacture of the I/O card		
                installed in MIO/EIO interface 3. May include serial number and		
                firmware revision.
                Additional information:
                The format of the string returned is determined by
                the manufacturer of the EIO device. There is no standard for 
                content of the string."
::= { mio3 3 }
               
               
mio3-type OBJECT-TYPE
    SYNTAX  INTEGER {
		   eEmpty(1),
		   eUnknown(2),
		   eDiskDrive(8),
		   eIOCard(12)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns an indication of the type of option installed in		
                MIO/EIO interface 3. See SIMM1-TYPE for an explanation of the		
                enumerations."
::= { mio3 4 }
               
               
io-timeout OBJECT-TYPE
    SYNTAX  INTEGER(5..300)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The amount of time, in seconds, to wait for more print job data		
                to be received before an I/O timeout occurs. The I/O channel		
                being timed is the I/O channel that received the data		
                associated with the current print job. If an I/O timeout		
                occurs, the PDL processing sub-system assumes all the data		
                associated with the current print job has been received, and		
                processes the end of job in an PDL specific manner. The POS		
                specifies the supported values.
                Additional information:
                If an I/O timeout occurs,the PDL processing
                sub-system will consider it an end of job condition only
                if there is data from another I/O subsystem waiting to be
                processed.    
                The supported values are 5 to 300 seconds. 
                Setting to a value outside the supported range returns 
                <noError> status and the
                value will be snapped to the nearest supported value."
::= { settings-io 1 }
               
               
io-switch OBJECT-TYPE
    SYNTAX  INTEGER {
		   eYes(1)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates if the device will switch between I/O channels when a		
                job boundary is encountered and print job data is available on		
                another I/O channel."
::= { settings-io 2 }
               
               
port1-parallel-speed OBJECT-TYPE
    SYNTAX  INTEGER {
		   eSlow(1),
		   eFast(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes the maximum parallel I/O port speed, for		
                port 1. This object is only supported if this port is a		
                parallel port. An eSlow setting causes a 10 us busy pulse per		
                received byte of data. An eFast setting causes a 1.5 us busy		
                pulse per received byte of data. In rare cases, setting this		
                value to eFast can cause the parallel port to no longer		
                transfer data reliably.
                Additional information:
                When the value of this object is changed, it takes 
                effect immediately. It is recommended that the printer
                be offline and not in a job when this object is changed."
::= { port1 4 }
               
               
port1-parallel-bidirectionality OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUnidirectional(1),
		   eBidirectional(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes whether the parallel I/O port supports		
                bidirectional communication for port 1. This object is only		
                supported if this port is a parallel port.
                Additional information:
                A get on this object returns the current mode 
                for the parallel port. Setting this object specifies whether 
                or not bidirectional communications will be allowed."
::= { port1 5 }
               
               
channelnumberofchannels OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "An indication of how many print data channels the I/O card		
                supports.
                Additional information:
                This object is used by the IIO card to tell the peripheral
                firmware how many logical channels will be used by the card.
                This object can only be set once per physical channel.  If
                an attempt is made to set it a subsequent time it is ignored
                and an return code of <ErrorActionCanNotBePerformedNow.is returned.  
                
                If new firmware is dynamically downloaded to the Blazers Plus
                card, and if that firmware uses more logical channels, it is
                necessary to reset the printer."
::= { channel 1 }
               
               
channelTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ChannelEntry
    ACCESS      not-accessible
    STATUS      optional
  ::= { channel 3 }


channelEntry OBJECT-TYPE
    SYNTAX      ChannelEntry
    ACCESS      not-accessible
    STATUS      optional
    INDEX       { channelindex }
  ::= {  channelTable 1 }


ChannelEntry  ::= SEQUENCE {
    channelindex             INTEGER,
    channeltype              INTEGER,
    channelprotocolversion   OCTET STRING,
    channelstate             INTEGER,
    channelifindex           INTEGER,
    channelstatus            INTEGER,
    channelinformation       OCTET STRING
}


channeltype OBJECT-TYPE
    SYNTAX  INTEGER {
		   eChOther(1),
		   eChAppleTalkPAP(7),
		   eChLPDServer(8),
		   eChNetwareRPrinter(9),
		   eChNetwarePServer(10),
		   eChPort9100(11),
		   eChDLCLLCPort(15),
		   eChBidirPortTCP(38)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Identifies the type of MIO print data channel.
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the type of each of
                the channels.  The type information is passed using the
                channelType object.  Values are then saved by the peripheral
                and reported when users request the value of
                prtChannelType."
::= { channelEntry 2 }
               
               
channelprotocolversion OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "The version of the protocol used on this MIO print data		
                channel.
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the protocol version
                of each of the channels.  The protocol version information is 
                passed using the channelProtocolVersion object.  Values are 
                then saved by the peripheral and reported when users request 
                the value of prtChannelProtocolVersion."
::= { channelEntry 3 }
               
               
channelstate OBJECT-TYPE
    SYNTAX  INTEGER {
		   eChOther(1),
		   eChPrintDataAccecped(3),
		   eChNoDataAccepted(4)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "The state of this print data channel. The value determines		
                whether control information and print data is allowed through		
                this channel or not.
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the state of each of 
                the channels.  The state can change from time to time.  The
                state information is passed using the channelState object.  
                Values are saved by the peripheral and reported when users 
                request the value of prtChannelState."
::= { channelEntry 4 }
               
               
channelifindex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "The value of ifIndex which corresponds to this channel.
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the value of the 
                IfIndex for each channel.  The IfIndex is used as part of 
                MIB-II.  The values are saved by the peripheral and reported 
                when users request the value of prtChannelIfIndex."
::= { channelEntry 5 }
               
               
channelstatus OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Sub-unit status is reported in the entries of the principle		
                table in the Group that represents the sub-unit. For sub-units		
                that report a status, there is a status column in the table and		
                the value of this column is always an integer formed in the		
                following way. The SubUnitStatus is an integer that is the sum		
                of 5 distinct values, Availability, Non-Critical, Critical,		
                On-line, and Transitioning. These values are:    	
                    Availability value    	
                    Available and Idle 0 000'b    	
                    Available and Standby 2 010'b    	
                    Available and Active 4 100'b    	
                    Available and Busy 6 110'b    	
                    Unavailable and OnRequest 1 001'b    	
                    Unavailable because Broken 3 011'b    	
                    Unknown 5 101'b    	
                    Non-Critical    	
                    No Non-Critical Alerts 0    	
                    Non-Critical Alerts 8    	
                    Critical    	
                    No Critical Alerts 0    	
                    Critical Alerts 16    	
                    On-Line    	
                    Intended state is On-Line 0    	
                    Intended state is Off-Line 32    	
                    Transitioning    	
                    At intended state 0    	
                    Transitioning to intended state 64.   
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the status of each of 
                the channels.  The status can change from time to time.  The
                status information is passed using the channelStatus object.  
                Values are saved by the peripheral and reported when users 
                request the value of prtChannelStatus."
::= { channelEntry 6 }
               
               
channelinformation OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Auxiliary information to allow a printing application to use		
                the channel for data submission to the printer. An application		
                capable of using a specific PrtChannelType should be able to		
                use the combined information from the prtChannelInformation and		
                other channel and interface group objects to 'bootstrap' its		
                use of the channel. prtChannelInformation is not intended to		
                provide a general channel description, nor to provide		
                information that is available once the channel is in use. The		
                encoding and interpretation of the prtChannelInformation object		
                is specific to channel type. The description of each		
                prtChannelType enum value for which prtChannelInformation is		
                defined specifies the appropriate encoding and interpretation,		
                including interaction with other objects. For channel types		
                that do not specify a prtChannelInformation value, its value		
                shall be null (0 length). When a new prtChannelType enumeration		
                value is registered, its accompanying description must specify		
                the encoding and interpretation of the prtChannelInformation		
                value for the channel type. prtChannelInformation semantics for		
                an existing PrtChannelType may be added or amended in the same		
                manner as described in section 2.4.1 for type 2 enumeration		
                values. The prtChannelInformation specifies values for a		
                collection of channel attributes, represented as text according		
                to the following rules:    	
                    1. The prtChannelInformation is coded in the NVT ASCII		
                        character set. It is not affected by localization.    	
                    2. The prtChannelInformation is a list of entries		
                        representing the attribute values. Each entry consists		
                        of the following items, in order:    	
                    a. a keyword, composed of alphabetic characters (A-Z, a-z),		
                        that identifies a channel attribute,    	
                    b. an Equals Sign (=) to delimit the keyword,    	
                    c. a data value, consisting of NVT ASCII graphics		
                        characters (codes 32-126),    	
                    d. a Line Feed character (code 10) to delimit the data		
                        value.    	
                    No other characters shall be present. Keywords are		
                        case-sensitive. Conventionally, keywords are		
                        capitalized (including each word of a multi-word		
                        keyword), and, since they occupy space in the		
                        prtChannelInformation, they are kept short.    	
                    3. If a channel attribute has multiple values, it is		
                        represented by multiple entries with the same keyword,		
                        each specifying one value. Otherwise, there shall be at		
                        most one entry for each attribute.    	
                    4. By default, entries may appear in any order. If there		
                        are ordering constraints for particular entries, these		
                        must be specified in their definitions.    	
                    5. The prtChannelInformation value may represent		
                        information that is not normally coded in textual form,		
                        or that is coded in a character set other than NVT		
                        ASCII. In these cases, whatever symbolic representation		
                        is conventionally used for the information should be		
                        used for encoding the prtChannelInformation. (For		
                        instance, a binary port value might be represented as a		
                        decimal number, Unicode would be represented in UTF-8		
                        format.)    	
                    6. For each PrtChannelType for which prtChannelInformation		
                        entries are defined, the descriptive text associated		
                        with the PrtChannelType enumeration value shall specify		
                        the following information for each entry:    	
                    Title: Brief description phrase, e.g.: 'Port name,'Service		
                        Name,'    	
                    Keyword: The keyword value, eg: 'Port,' 'Service' Syntax:		
                        The encoding of the entry value, if it cannot be		
                        directly represented by NVT ASCII,    	
                    Status: 'Mandatory,' 'Optional,' or 'Conditionally		
                        Mandatory,'    	
                    Multiplicity: 'Single' or 'Multiple,' to indicate whether		
                        the entry may be present multiple times,    	
                    Description: Description of the use of the entry, other		
                        information required to complete the definition (e.g.:		
                        ordering contstraints, interactions between entries).		
                           	
                Applications that interpret prtChannelInformation should ignore		
                unrecognized entries, so they are not affected if new entry		
                types are added.
                Additional information:
                After telling the peripheral how many logical channels will
                be used, the IIO card tells the printer the value of the information 
                value of each of the channels.  The information is auxiliary 
                information used in conjunction with the channel Type."
::= { channelEntry 7 }
               
               
deviceChannelTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DeviceChannelEntry
    ACCESS      not-accessible
    STATUS      optional
  ::= { tables 2 }


deviceChannelEntry OBJECT-TYPE
    SYNTAX      DeviceChannelEntry
    ACCESS      not-accessible
    STATUS      optional
    INDEX       { channel-index }
  ::= {  deviceChannelTable 1 }


DeviceChannelEntry   ::= SEQUENCE {
    channel-index              INTEGER,
    channel-bytes-sent         INTEGER,
    channel-bytes-received     INTEGER,
    channel-io-errors          INTEGER,
    channel-jobs-received      INTEGER,
    channel-mio                INTEGER
}


channel-bytes-sent OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The low order 31 bits of the number of bytes sent from the		
                printer to the host on this logical channel."
::= { deviceChannelEntry 2 }
               
               
channel-bytes-received OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The low order 31 bits of the number of bytes received by the		
                printer from the host on this logical channel."
::= { deviceChannelEntry 3 }
               
               
channel-io-errors OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The low order 31 bits of the number of I/O errors which have		
                occured on this logical channel."
::= { deviceChannelEntry 4 }
               
               
channel-jobs-received OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The low order 31 bits of the number of print jobs which have		
                been received on this logical channel."
::= { deviceChannelEntry 5 }
               
               
channel-mio OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The number of the MIO card associated with this logical		
                channel. If this logical channel is not associated with an MIO		
                card a zero is returned. The value returned for each logical		
                channel is the MIO card's physical slot number. The list of		
                supported values should be documented in the device POS.
                Additional information:
                The value returned will be zero for channels 1..3.  
                If an MIOA card is installed, channels 4..10 will 
                return a value of one or two. 
                If an MIOB card is installed, channels 11..17 will 
                return a value of one or two but not the 
                same as channels 4..10.
                When two IIO cards are installed, the value 
                returned by any channel 4..17 may change after the 
                printer is power cycled."
::= { deviceChannelEntry 6 }
               
               
rpc-bind-protocol-address OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Array of Berkeley sockets style protocol addresses used to bind		
                RPC to a communications protocol family. Setting an instance of		
                this array object to a zero length binary value disables the		
                transport protocol indicated by that instance. All multi-bytes		
                fields are in network (or big-endian) order. Bytes 1 and 2		
                indicate the transport protocol. Some of the transport protocol		
                mapping information can be found in RFC 1010 Assigned Numbers.		
                A list of interesting transport protocol number mappings		
                include:    	
                    <table>
                    Protocol | Number
                    ---------+-------
                     UDP/IP  |  17 
                      IPX    |  1000 
                      MLC    |  4660
                    </table>
                    Bytes 3 and 4 indicate the address family. The address		
                        family uses the same mapping as the BSD sockets address		
                        family. A list of interesting address family mappings		
                        include:    	
                    <table>
                    Address Family | Number
                    ---------------+-------
                        Internet   |   2
                        NetWare    |   6
                        MLC        | 22136 
                    </table>
                The format the fifth and following bytes is dependent on the		
                address family. For the Internet address family, bytes 5 and 6		
                contain the port number, bytes 7 through 10 contain the IP		
                address, and the following eight bytes are unused. For NetWare,		
                bytes 5 through 8 are the network number, bytes 9 through 14		
                are the node number, and bytes 15 and 16 are the socket		
                number.
                Additional information:
                The length of the binary value is zero
                if the instance of an object in the rpc-bind-protocol-address
                array is not in use.
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed."
::= { settings-rpc 2 }
               
               
rpc-bound-protocol-address OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "An array of Berkeley sockets style protocol addresses that the		
                NFS service has been bound to successful. The format is that		
                same as the array of RPC-BIND-PROTOCOL-ADDRESS of objects.
                Additional information:
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed."
::= { status-rpc 3 }
               
               
file-system-max-open-files OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The number of open files allowed at one time. Opening a file		
                when the maximum number of files are currently open will fail.
                Additional information:
                Indicates the number of open files a
                personality (e.g. PCL or PostScript) is guaranteed to be
                able to open before the file system runs out of file handles.
                		   This object is between 1 and 500.
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed."
::= { settings-file-system 2 }
               
               
file-system-set-system-partition-writeable OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "This object allows the system partition to be written to. It		
                consists of a C structure containing the following fields:    	
                    typedef struct {    	
                    ubyte <blank>[8];    	
                    ubyte volumenumber;    	
                    } fs_writeable_system_partition_t;    	
                    which is described below:    	
                    Bytes 0 - 7: contain the <blank>    	
                    Byte 8 : is the volume number    	
                Access to this command is controlled by <blank>. If the		
                <blank> supplied is incorrect the command will fail. The		
                volumenumber is a volume number of an existing system		
                partition.
                Additional information:
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed.
                Returns <badValue> if <blank> is incorrect or if
                		   the volume requested is not present."
::= { settings-file-system 6 }
               
               
file-system-set-system-partition-readonly OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Changes a system partition to be READ-ONLY. The value is the		
                volume number to change. If the volume number specified is NOT		
                a system partition an error is returned.
                Additional information:
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed.
                Returns <badValue> if the volume requested
                		   is not present."
::= { settings-file-system 7 }
               
               
file-system-delete-files OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting this object causes the specified filename to be		
                deleted, after first validating that the authentication data is		
                correct for the specified user ID.    	
                    The format for this object is a C structure:   	
                    typedef struct {    	
                    sint32 UserId;    	
                    uint16 AuthenticationDataLen    	
                    ubyte AuthenticationData[]    	
                    char Filename[];    	
                    } fs_delete_files_t;    	
                    which is described below:   	
                    Bytes 0 - 3: contains a user id represented as a multi-byte		
                        value that is stored in big-endian format, where the		
                        most significant byte occurs first.    	
                    Bytes 4 - 5 : Length of the Athentication data that follows		
                        starting at offset 6. Stored as a multi-byte value that		
                        is stored in big-endian format, where the most		
                        significant byte occurs first.    	
                    Bytes 6 - 6+AuthenticationDataLen : a ubyte array		
                        containing the Authentication data used to verify		
                        access for this operation.   	
                    Bytes starting at offset (6+AuthenticationDataLen+1): A		
                        null terminated character array representing the ASCII		
                        file name to be deleted. The length of the string will		
                        be limited by the remaining space in the object.    	
                This string represents a fully-qualified path name which may		
                specify a filename or a regular expression that may match		
                multiple files (e.g <path>/*.exe). Access to this command is		
                controlled by the UserId and the authentication data. If the		
                UserID or authentication data supplied is incorrect the command		
                will fail. The device POS will specify any limitations to the		
                length of the filename string, what constitutes a correct user		
                ID, what constitutes correct authentication data, and the		
                significance of any return values.
                Additional information:
                Setting this object causes the specified filename
                to be deleted, after first validating that the
                authentication data is correct for the specified
                user ID.  This object is always present.
                
                The format for this object is a C structure:
                
                typedef struct {        
                sint32 UserId;        
                uint16 AuthenticationDataLen 
                ubyte  AuthenticationData[]  
                char   Filename[];     
                } fs_delete_files_t;   
                
                Bytes 0 - 3: contains a user id represented
                as a multi-byte value that is stored in big-endian
                format, where the most significant byte occurs first.
                
                Bytes 4 - 5 : Length of the authentication data that
                follows starting at offset 6. Stored as a multi-byte
                value that is stored in big-endian format, where the
                most significant byte occurs first. 
                
                Bytes 6 - 6+AuthenticationDataLen : a ubyte array
                containing the authentication data used to verify
                access for this operation.
                
                Bytes starting at offset (6+AuthenticationDataLen+1):
                A null terminated character array representing the
                ASCII file name to be deleted. The length of the
                string will be limited by the remaining space in the
                object.  This string represents a fully-qualified path 
                name which may specify a filename or a file-type regular 
                expression that may match multiple files (e.g.,
                <path>/*.exe). 
                
                Access to this command is controlled by the UserId
                and the authentication data.  If the UserID or 
                authentication data supplied is incorrect the 
                command will fail.
                
                The device POS will specify any limitations to the
                length of the filename string, what constitutes a
                correct user ID, what constitutes correct
                authentication data, and the significance of any
                return values."
::= { settings-file-system 8 }
               
               
file-system-security-access-password OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This object acts as a gate keeper for write access to the PML		
                objects FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES,		
                FILE-SYSTEM-ERASE-MODE, and FILE-SYSTEM-WIPE-DISK. The object		
                can be viewed as always being in one of 4 states:    	
                    State 0 --> Un-initialized:		
                        FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is the empty		
                        string and a pmlget operation on the object will return		
                        the string '0'. This will be the state after an NVRAM		
                        init which is the only way to set the object to the		
                        empty string. It cannot be set to the empty string		
                        through PML. In this state write access to		
                        FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES,		
                        FILE-SYSTEM-ERASE-MODE and FILE-SYSTEM-WIPE-DISK is		
                        disabled while write access to the object itself is		
                        enabled. A successful set operation on the object in		
                        this state will return the string 'SET' and will result		
                        in a transition to State 3.    	
                    State 1 --> The Password is set to a non-empty string: A		
                        pmlget operation on the object will return the string		
                        '1' regardless of the actual stored password value. In		
                        this state write access to		
                        FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES,		
                        FILE-SYSTEM-ERASE-MODE and FILE-SYSTEM-WIPE-DISK is		
                        disabled. The only string the object itself can be		
                        successfully set to while in this state is the current		
                        value of the password. Setting the object to its		
                        current value causes a transition to State 2 which is		
                        an authenticated state. The value returned from such a		
                        set operation will be the string 'OK'.    	
                    State 2 --> The password is in an authenticated state: The		
                        'gate' to write to the PML objects		
                        FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES,		
                        FILE-SYSTEM-ERASE-MODE, and FILE-SYSTEM-WIPE-DISK is		
                        open. One, and only one, write operation can be		
                        performed on one of these three objects. During such a		
                        write operation the object itself will transition to		
                        State 1 thus closing the gate. In State 2 a pmlset		
                        operation on the object will result in the password		
                        being set and a transfer to State 3. The value returned		
                        from a set operation in this state on		
                        FILE-SYSTEM-SECURITY-ACCESS-PASSWORD will be 'SET'. A		
                        pmlget operation on the object will return the string		
                        '2' regardless of the actual password value.    	
                    State 3 --> The password was just changed: A pmlget		
                        operation on the object will return the string '3'.		
                        Otherwise behaviors in State 3 are exactly like in		
                        State 1.   "
::= { settings-file-system 9 }
               
               
file-system-external-access-capabilities OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This object is used to control access to the file system of the		
                device. It is always readable. It is writable when		
                FILE-SYSTEM-SECURITY-ACCESS-PASSWORD is not the empty string,		
                and a successful write to that object with the current password		
                has preceded the write to this object. In other words, the		
                FILE-SYSTEM-SECURITY-ACCESS-PASSWORD must be in the		
                'authenticated state' for a write on		
                FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES to succeed. After the		
                object has successfully been written to, it becomes read-only,		
                and the FILE-SYSTEM-SECURITY-ACCESS-PASSWORD object exits the		
                authenticated state. FILE-SYSTEM-SECURITY-ACCESS-PASSWORD must		
                then be written to again with the current password in order to		
                make another write operation on		
                FILE-SYSTEM-EXTERNAL-ACCESS-CAPABILITIES possible.    	
                    cDisablePJLFileSystemAccess - All file system access		
                        through PJL will be disabled.    	
                    cDisablePMLFileSystemWrite - All file-systems-related PML		
                        objects such as FILE-SYSTEM-DELETE-FILES or		
                        hrPartitionLabel become read-only. For objects that are		
                        normally write-only this means that no successful		
                        operations can now be performed on them.    	
                    cDisableNFSFileSystemAccess - All NFS file system access		
                        will be disabled.    	
                    cDisablePSFileSystemAccess - All file system access through		
                        PostScript will be disabled.    	
                    cDisableEWSFileSystemAccess - All access to the file system		
                        by the Embedded Web Server will be disabled.   "
::= { settings-file-system 10 }
               
               
file-system2-initialize-volume OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInitializing(2)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting this object to eInitializing causes file system 2 to be		
                initialized. Reading this object indicates if the file system		
                is currently being initialized.
                Additional information:
                The hrDeviceIndex value for the mass storage
                device is the same value that is used to index into the
                FILE-SYSTEM sub-tree.  Since this product supports
                up to 3 physical mass storage device, and since the hrDeviceIndex
                for the mass storage devices will start at 2 if the mass
                	       storage device is installed, the FILE-SYSTEM2-INITIALIZE-VOLUME
                	       object will be the object that allows the mass storage device to be 
                initialized that is the 1st device."
::= { file-system2 6 }
               
               
file-system3-initialize-volume OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInitializing(2)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting this object to eInitializing causes file system 3 to be		
                initialized. Reading this object indicates if the file system		
                is currently being initialized.
                Additional information:
                The hrDeviceIndex value for the mass storage
                device is the same value that is used to index into the
                FILE-SYSTEM sub-tree.  Since this product supports
                up to 3 physical mass storage device, and since the hrDeviceIndex
                for the mass storage devices will start at 2 if the mass
                	       storage device is installed, the FILE-SYSTEM3-INITIALIZE-VOLUME
                	       object will be the object that allows the mass storage device to be 
                initialized that is the 2nd device."
::= { file-system3 6 }
               
               
file-system4-initialize-volume OBJECT-TYPE
    SYNTAX  INTEGER {
		   eInitializing(2)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting this object to eInitializing causes file system 4 to be		
                initialized. Reading this object indicates if the file system		
                is currently being initialized.
                Additional information:
                The hrDeviceIndex value for the mass storage
                device is the same value that is used to index into the
                FILE-SYSTEM sub-tree.  Since this product supports
                up to 3 physical mass storage devices, and since the hrDeviceIndex
                for the mass storage devices will start at 2 if the mass
                	       storage device is installed, the FILE-SYSTEM4-INITIALIZE-VOLUME
                	       object will be the object that allows the mass storage device to be 
                initialized that is the 3rd device."
::= { file-system4 6 }
               
               
mass-storage-resource-change-counter OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "A counter which changes when a mass storage based resource has		
                been added or deleted.
                Additional information:
                The value of this counter changes 
                each time the MASS-STORAGE-RESOURCE-CHANGED object
                is set to eTrue.  The value also changes when the 
                mass storage device is initialized.  However, the value does not
                change when a mass storage device is removed and a different
                mass storage device is installed.  Initializing all volumes sets 
                this object back to the factory default value.  A reboot sets
                	   this object back to the factory devalut value.
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed."
::= { mass-storage-resources 1 }
               
               
mass-storage-resource-changed OBJECT-TYPE
    SYNTAX  INTEGER {
		   eTrue(2)
		   }
    ACCESS  write-only
    STATUS  optional
    DESCRIPTION
                "Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE-COUNTER to		
                be incremented.
                Additional information:
                Returns <noSuchName>
                status if attempting to access this object and there
                is no storage device is installed."
::= { mass-storage-resources 2 }
               
               
ram-disk-mode OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eAuto(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or controls RAM disk support. eOFF turns off the RAM		
                disk functionality. eOn turns on the RAM disk functionality and		
                creates a RAM disk whose size is controlled by the		
                RAM-DISK-SIZE object. eAuto turns on the RAM disk functionality		
                and creates a RAM disk size determined by the printer based on		
                installed options and other memory related settings.
                Additional information:
                Returns or controls RAM disk support.  eOFF turns off
                the RAM disk functionality. eAuto turns on
                the RAM disk functionality and creates a RAM disk size
                determined by the printer based on the amount of installed
                memory."
::= { settings-mass-storage-bd 1 }
               
               
ram-disk-size OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns or controls the size of the RAM disk. The device POS		
                specifies the minimum memory requirements. The object		
                MAXIMUM-RAM-DISK-MEMORY specifies the maximum memory available		
                for the RAM disk.
                Additional information:
                Returns the size of the RAM disk."
::= { settings-mass-storage-bd 2 }
               
               
maximum-ram-disk-memory OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object's name is misleading. This object does not return		
                the maximum configurable RAM disk size. Instead, it returns the		
                maximum amount of memory, in bytes, that can used to increase		
                the size of the RAM disk.
                Additional information:
                This object returns the maximum amount of additional 
                memory that is available for increasing the size of the RAM 
                disk."
::= { status-mass-storage-bd 1 }
               
               
page-frame-memory-available OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns the abount of page-frame memory in bytes available in		
                the system.
                Additional information:
                Total amount of onboard pageframe memory, in kilobytes,
                present in the printer."
::= { status-system 72 }
               
               
mono-color-switching-mode OBJECT-TYPE
    SYNTAX  INTEGER {
		   eAutoSwitch(1),
		   eAlwaysSwitch(2),
		   eLookAheadSwitch(3)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This object allows the user to view/change the color/mono		
                switching mode for a device.
                Additional information:
                This object allows the user to view/change the
                color/mono switching mode for a device.  The behavior of 
                each setting may vary depending on the device. The value will
                be stored in NVRAM"
::= { settings-system 31 }
               
               
device-configure-printer-parameters OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..256))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Allow the printer to be configured as a duplex or simplex		
                printer. There will be <blank> encoded in this string and		
                decoded by the printer firmware. If the <blank> check passes		
                the printer will be configured accordingly.
                Additional information:
                Used to configure LaserJet 4650 engines for duplex enabled or not.
                Encoded configuration string is passed in, which is decoded
                by firmware.  Firmware verifies config. string is valid, and
                retrieves device Configuration data.
                Expandable to accommodate future products configuration needs."
::= { device-configure 12 }
               
               
job-input-auto-continue-timeout OBJECT-TYPE
    SYNTAX  INTEGER(-1..3600)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The number of seconds the device waits after a job related		
                continuable error occurs before automatically continuing. An		
                example job related continuable error is the job requesting a		
                media size that is not available. After the timeout expires,		
                the device will continue processing the job as if a continue		
                event occurred, such as the front panel continue key being		
                pressed. If the value is -1, the device does not automatically		
                continue after a job related continuable error occurs. If the		
                value is 0, the device immediately continues. If the value is		
                greater than 0, the value represents the timeout value in		
                seconds.
                Additional information:
                The number of seconds the device waits after a job
                related continuable error occurs before automatically
                continuing.  An example job related continuable error is
                the job requesting a media size that is not available.
                After the timeout expires, the device will continue
                processing the job accourding to the action defined by
                JOB-INPUT-AUTO-CONTINUE-MODE. 
                If the value is -1, the device does not automatically continue
                after a job related continuable error occurs.  If the
                value is 0, the device immediately continues.  If the
                value is greater than 0, the value represents the
                timeout value in seconds.
                The data for this object is stored in NVRAM."
::= { status-system 35 }
               
               
job-input-auto-continue-mode OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the device behavior when the desired media is		
                not currently available.    	
                    cCancelJob - The device cancels the job. The device POS		
                        should explain what happens if this item is not the		
                        only item in the collection.    	
                    cAutoMediaSizeOverride - The device is allowed to		
                        substitute a different size media.    	
                    cAutoMediaNameOverride - The device is allowed to		
                        substitute a different media name.    	
                    cUSMediaSizeOverride - The device is allowed to substitute		
                        US media sizes (letter, etc.) for ISO media sizes (A4,		
                        etc.).    	
                    cISOMediaSizeOverride - The device is allowed to substitute		
                        ISO media sizes (A4, etc.) for US media sizes (letter,		
                        etc.).   
                Additional information:
                Returns or sets the device behavior when the desired
                media is not currently available.
                cCancelJob - The device cancels the job regardless of other
                item settings.  
                cAutoMediaSizeOverride - The device is allowed to substitute 
                a different size media.
                cAutoMediaNameOverride - The device is allowed to substitute 
                a different media name.
                --                 cUSMediaSizeOverride - The device is allowed to substitute
                --                              US media sizes (letter, etc.) for ISO media sizes
                --                              (A4, etc.).
                --                 cISOMediaSizeOverride - The device is allowed to substitute
                --                              ISO media sizes (A4, etc.) for US media sizes
                --                              (letter, etc.).
                At least one bit of the collection must be set; setting
                this object to zero will cause a status of
                <badValue> to be returned.
                This object describes the action that is performed when the
                JOB-INPUT-AUTO-CONTINUE-TIMEOUT expires. "
::= { status-system 36 }
               
               
job-output-auto-continue-timeout OBJECT-TYPE
    SYNTAX  INTEGER(-1..3600)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the time that the printer will wait after an		
                output bin becomes full and the printer is trying to deliver a		
                sheet of media to that output bin. When the timeout expires,		
                the job is processed according to the OUTBINn-OVERRIDE-MODE. A		
                value of -1 indicates that the printer will wait for a continue		
                event. A non-negative value is the number of seconds to wait.
                Additional information:
                Returns or sets the time that the printer will wait
                after an output bin becomes full and the printer is
                trying to deliver a sheet of media to that output bin.
                When the timeout expires, the job is processed according
                to the OUTBINn-OVERRIDE-MODE.  A value of -1 indicates
                that the printer will wait for a continue event.  A non-
                negative value is the number of seconds to wait."
::= { status-system 40 }
               
               
model-number OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Identifies the device model number as listed in the HP		
                corporate price list (e.g. C2121A for DeskJet 500C). The string		
                is as specific as possible. Products should note in POS if the		
                model number on the CPL changes but the device reports the		
                previous model number. If the model number changes based on the		
                installed options, the POS should indicate if only the base		
                model number is returned, or if the device senses the installed		
                options and returns the correct model number. If possible,		
                encode the model number in a symbol set (like Roman-8) that		
                matches the ASCII character set and limit the characters used		
                to ASCII characters.
                Additional information:
                Identifies the device model number as listed in the HP
                corporate price list (e.g.  C2121A for DeskJet 500C).
                The string is as specific as possible.
                The value of this object does not change based on 
                the installed options. The default of this object is the
                same on all LJ8150 printers."
::= { id 1 }
               
               
model-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..32))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Identifies the device model name (e.g. ''DeskJet 1200C''). The		
                string is as specific as possible. Capitalization and spacing		
                should match family naming conventions. Products should note in		
                POS if the model name on the HP corporate price list changes		
                but the device reports the previous device name. If the model		
                name changes based on the installed options, the POS should		
                indicate if only the base model name is returned, or if the		
                device senses the installed options and returns the correct		
                model name. If possible, encode the model name in a symbol set		
                (like Roman-8) that matches the ASCII character set and limit		
                the characters used to ASCII characters.
                Additional information:
                Since the value of this object is frequently used in 
                displaying a list of printers, it is kept relatively short in
                case systems have limited width for their display area. The
                model name does not change based on sensing of installed options."
::= { id 2 }
               
               
engine-self-diagnostic OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The ENGINE-SELF-DIAGNOSTIC object reveals current engine		
                failures; it returns a binary string of two-byte motor, clutch,		
                solenoid, and sensor failure codes.
                Additional information:
                The ENGINE-SELF-DIAGNOSTIC object reveals current
                Engine Failures; it returns a BINARY string of two-byte
                Motor, Clutch, Solenoid and Sensor failure codes."
::= { test 7 }
               
               
engine-parameter OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The ENGINE-PARAMETER object returns a device specific set of		
                engine parameters as a binary string of byte values. It will be		
                necessary to have a decoder for each engine to interpret the		
                data.
                Additional information:
                The ENGINE-PARAMETER object returns a device specific
                set of engine parameters as a BINARY string of byte
                values. It will be necessary to have a decoder for each
                engine to interpret the data."
::= { test 8 }
               
               
pml-engine-nvram-shadow-copy OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Allow the user to read/write shadow copy of the DC controller		
                NVRAM that is stored as a backup of the actual DC controller		
                NVRAM.
                Additional information:
                Allow the user to read/write shadow copy of the DC controller
                NVRAM that is stored as a backup of the actual DC controller
                NVRAM."
::= { test 9 }
               
               
pml-engine-nvram OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Allow the user to read/write the entire formatter accessible		
                NVRAM. This refers to the NVRAM on the DC controller.
                Additional information:
                Allow the user to read/write the entire formatter accessible
                NVRAM. This refers to the NVRAM on the DC controller."
::= { test 10 }
               
               
default-media-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the media name that is used until the media		
                name is changed by a print job command.
                Additional information:
                Returns or sets the media name that is used until the
                media name is changed by a print job command.
                This string must be one of the MEDIAn-NAME 
                objects. 
                This object is localized if the corresponding MEDIAn-NAME 
                object is localized.
                The data for this object is stored in NVRAM."
::= { settings-pdl 22 }
               
               
override-media-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Sets a string identifying the media name that is to be used in		
                place of the currently requested media. The substitution will		
                continue until another media is selected. If set to a named		
                media that is not currently available the requested media is		
                not overridden.
                Additional information:
                When a request is received to print on a size and
                type of media that is not currently available, this
                object contains the desired media name as set by the
                print job. This object should be set to a media name
                that is currently available in the printer.  If a
                paper mount request is not pending, attempting to get
                or set this object will cause
                <noSuchName> to be returned.
                Setting this object to a string other than one of the
                MEDIAn-NAME objects (MEDIA-NAMES-AVAILABLE is applied)
                will cause a status of <badValue>
                to be returned."
::= { settings-prt-eng 2 }
               
               
override-media-size OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eLedger(11),
		   eROC16K(17),
		   eJISExecutive(18),
		   eROC8K(19),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eISOandJISA3(27),
		   eJISB5(45),
		   eJISB4(46),
		   eJapanesePostcardDouble(72),
		   eMonarch(80),
		   eCommercial10(81),
		   eInternationalDL(90),
		   eInternationalC5(91),
		   eInternationalB5(100),
		   eCustom(101),
		   eUSLetterR(258),
		   eISOandJISA4R(282),
		   eUnknownMediaSize(32767)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Sets the media size that is to be used in place of the		
                currently requested media size.
                Additional information:
                When a request is received to print on a size and
                type of media that is not currently available, this object
                contains the desired size as set by the print job. This object
                should be set to a media size that is currently available to the
                printer. If a paper mount request is not pending, attempting to
                get or set this object will cause <noSuchName>
                to be returned."
::= { settings-prt-eng 3 }
               
               
marking-agent-highlights-density-setting OBJECT-TYPE
    SYNTAX  INTEGER(-5..5)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the marking agent highlights density setting		
                for each of the marking agents installed. The value of this		
                object is in the range of -5..+5. The Marking Agent (aka Print)		
                density is the instantaneous amount of marking agent applied to		
                the media while printing. A value of -5 has the lowest print		
                density, yeilding a lighter pageA value of +5 the highest print		
                density, yielding a darker page.
                Additional information:
                Returns or sets the marking agent highlights density setting for each 
                of the marking agents installed. The value of this object is in the 
                range of -5..+5. The Marking Agent (aka Print) density is the instantaneous 
                amount of marking agent applied to the media while printing. A value of -5 
                has the lowest print density, yielding a lighter page. A value of +5 has the 
                highest print density, yielding a darker page."
::= { marking-agent-density 2 }
               
               
marking-agent-midtones-density-setting OBJECT-TYPE
    SYNTAX  INTEGER(-5..5)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the marking agent midtones density setting for		
                each of the marking agents installed. The value of this object		
                is in the range of -5..+5. See		
                MARKING-AGENT-HIGHLIGHTS-DENSITY-SETTING for a more specific		
                description.
                Additional information:
                Returns or sets the marking agent midtones density setting for each 
                of the marking agents installed. The value of this object is in the 
                range of -5..+5. See MARKING-AGENT-HIGHLIGHTS-DENSITY-SETTING 
                for a more specific description."
::= { marking-agent-density 3 }
               
               
marking-agent-shadows-density-setting OBJECT-TYPE
    SYNTAX  INTEGER(-5..5)
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the marking agent shadows density setting for		
                each of the marking agents installed. The value of this object		
                is in the range of -5..+5. See		
                MARKING-AGENT-HIGHLIGHTS-DENSITY-SETTING for a more specific		
                description.
                Additional information:
                Returns or sets the marking agent shadows density setting for each 
                of the marking agents installed. The value of this object is in the 
                range of -5..+5. See MARKING-AGENT-HIGHLIGHTS-DENSITY-SETTING 
                for a more specific description."
::= { marking-agent-density 4 }
               
               
total-color-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of color pages printed by the device.
                Additional information:
                Total number of color pages printed by the device.
                The valid range of this object is 0 to 2^24-1. When the number of
                color pages printed exceeds the maximum color page count, the
                value will roll to zero.
                A duplexed sheet of media will cause the counter to be
                incremented by two."
::= { status-prt-eng 7 }
               
               
duplex-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of sheets of media that have been duplex printed.		
                A sheet is counted if it travels through the duplex page path,		
                regardless of whether or not marks are made on the page. The		
                POS will indicate if the value is kept in NVRAM.
                Additional information:
                Total number of sheets of media that have been duplex
                printed.  A sheet is counted if it travels through the
                duplex page path, regardless of whether or not marks are
                made on the page.  
                This value is kept in NVRAM however the NVRAM value is only 
                updated every 10 sheets. NOTE: The value returned by this object 
                will be incremented every sheet but if power is lost between
                NVRAM updates up to 9 sheets of the count may be lost. The counter 
                will be reset to zero after 16,777,215 (2^24-1) pages. "
::= { status-prt-eng 22 }
               
               
print-engine-revision OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..16))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Print engine revision string.
                Additional information:
                Print engine revision string.  The symbol set for this string is 
                Roman-8. "
::= { status-prt-eng 26 }
               
               
printer-cal-dhalf-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the page count when the last DHALF calibration		
                occurred. A '-1' indicates that a calibration of this kind has		
                not taken place yet. This object exists (and is meaningful)		
                only in color printers.
                Additional information:
                Provides the page count when last DHALF calibration
                occurred. A -1 indicates that a calibration of this
                kind has not taken place yet. This object exists
                (and is meaningful) only in color printers."
::= { printer-calibration-dhalf 1 }
               
               
printer-cal-dhalf-utc OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the time (in UTC - Universal Time Code format) when		
                the last DHALF calibration occurred. This value could be zero		
                if no calibration has taken place or if the printer lacked		
                real-time. This object exists (and is meaningful) only in color		
                printers.
                Additional information:
                Provides the time (in UTC - Universal Time Code format)
                when last DHALF calibration occurred. This value could
                be zero if no calibration has taken place and / or if
                the printer lacked real-time. This object exists (and
                is meaningful) only in color printers."
::= { printer-calibration-dhalf 2 }
               
               
printer-cal-cpr-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the page count when last CPR calibration occurred. A		
                '-1' indicates that a calibration of this kind has not taken		
                place yet. This object exists (and is meaningful) only in color		
                printers.
                Additional information:
                Provides the page count when last CPR calibration
                occurred. A -1 indicates that a calibration of this
                kind has not taken place yet. This object exists
                (and is meaningful) only in color printers."
::= { printer-calibration-cpr 1 }
               
               
printer-cal-cpr-utc OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the time (in UTC - Universal Time Code format) when		
                the last CPR calibration occurred. This value could be zero if		
                no calibration has taken place or if the printer lacked		
                real-time. This object exists (and is meaningful) only in color		
                printers.
                Additional information:
                Provides the time (in UTC - Universal Time Code format)
                when last CPR calibration occurred. This value could
                be zero if no calibration has taken place and / or if
                the printer lacked real-time. This object exists (and
                is meaningful) only in color printers."
::= { printer-calibration-cpr 2 }
               
               
input-tray-auto-select OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Indicates if the device will automatically try to load media		
                from the next input media tray in the auto-select sequence		
                (defined by each device) when it cannot load media from the		
                current tray. Locked trays will not be permitted in the		
                auto-select sequence. This object has no meaning if there is		
                only one unlocked input media tray.
                Additional information:
                Indicates if the device will automatically try to load
                media from the next input media tray in the auto-select
                sequence (defined by each device) when it cannot load
                media from the current tray.  Locked trays will not be
                permitted in the auto-select sequence.  This object has
                no meaning if there is only one unlocked input media
                tray."
::= { settings-intray 2 }
               
               
default-custom-paper-dim-unit OBJECT-TYPE
    SYNTAX  INTEGER {
		   eTenThousandthsOfInches(3),
		   eMicrometers(4)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The units of measure used to specify the width and height of		
                the printer's default custom paper size. The unit of measure of		
                eTenThousandthsOfInches is 0.0001 inches.
                Additional information:
                The units of measure used to specify the width and 
                height of the printer's default custom paper size.
                The unit of measure of eTenThousandthsOfInches is
                0.0001 inches."
::= { settings-intray 10 }
               
               
default-custom-paper-feed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Sets the printer's default custom paper size dimension in the		
                feed direction (direction parallel to the direction of paper		
                feeding). The value for this object is specified in micrometers		
                or tenthousandths of an inch, depending upon the value of		
                DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is		
                engine-dependent and should be documented in the POS for each		
                product.
                Additional information:
                Sets the printer's default custom paper size dimension 
                in the feed direction (direction parallel to the direction
                of paper feeding). The value for this object is specified
                in micrometers or tenthousandths of an inch, depending upon
                the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid
                range is engine-dependent and should be documented in the
                POS for each product."
::= { settings-intray 11 }
               
               
default-custom-paper-xfeed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Sets the printer's default custom paper size dimension in the		
                cross-feed direction (direction ninety degrees relative to the		
                direction of paper feeding). The value for this object is		
                specified in micrometers or tenthousandths of an inch,		
                depending upon the value of DEFAULT-CUSTOM-PAPER-DIM-UNIT. The		
                valid range is engine-dependent and should be documented in the		
                POS for each product.
                Additional information:
                Sets the printer's default custom paper size dimension 
                in the cross-feed direction (direction ninety degrees
                relative to the direction of paper feeding). The value
                for this object is specified in micrometers or
                tenthousandths of an inch, depending upon the value of
                DEFAULT-CUSTOM-PAPER-DIM-UNIT. The valid range is
                engine-dependent and should be documented in the POS
                for each product."
::= { settings-intray 12 }
               
               
input-tray-max-media-feed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The maximum physical media size in the feed direction of this		
                input device expressed in units of measure specified by INPUT-		
                TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies 'unlimited', a		
                value of (-2) implies 'unknown'.
                Additional information:
                The maximum physical media size in the feed direction of this 
                input device expressed in units of measure specified by
                PrtInputDimUnit. A value of (-1) implies 'unlimited',
                a value of (-2) implies 'unknown'.
                Refer to Printer Management Standards web page,
                http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement, for more details in the original format
                of the Standard Printer MIB."
::= { settings-intray 14 }
               
               
input-tray-max-media-xfeed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The maximum physical media size across the feed direction of a		
                particular input device expressed in units of measure specified		
                by INPUT-TRAY-MIN-MAX-DIM-UNIT. A value of (-1) implies		
                'unlimited', a value of (-2) implies 'unknown'.
                Additional information:
                The maximum physical media size across the feed direction of this 
                input device expressed in units of measure specified by
                PrtInputDimUnit. A value of (-1) implies 'unlimited',
                a value of (-2) implies 'unknown'.
                Refer to Printer Management Standards web page,
                http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement, f
                or more details in the original format
                of the Standard Printer MIB."
::= { settings-intray 15 }
               
               
input-tray-min-media-feed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The minimum physical media size in the feed direction of a		
                particular input device expressed in units of measure specified		
                by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited',		
                a value of (-2) implies 'unknown'.
                Additional information:
                The minimum physical media size in the feed direction of this 
                input device expressed in units of measure specified by
                PrtInputDimUnit. A value of (-1) implies 'unlimited',
                a value of (-2) implies 'unknown'.
                Refer to Printer Management Standards web page,
                http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement,
                for more details in the original format
                of the Standard Printer MIB."
::= { settings-intray 16 }
               
               
input-tray-min-media-xfeed-dim OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The minimum physical media size across the feed direction of a		
                particular input device expressed in units of measure specified		
                by PrtInputMinMaxDimUnit. A value of (-1) implies 'unlimited',		
                a value of (-2) implies 'unknown'.
                Additional information:
                The minimum physical media size across the feed direction of this 
                input device expressed in units of measure specified by
                PrtInputDimUnit. A value of (-1) implies 'unlimited',
                a value of (-2) implies 'unknown'.
                Refer to Printer Management Standards web page,
                http://bldlabs.boi.hp.com/BLDPrinterLab/Project/PrinterManagement,
                for more details in the original format
                of the Standard Printer MIB."
::= { settings-intray 17 }
               
               
manually-feed-prompt-test OBJECT-TYPE
    SYNTAX  INTEGER {
		   eFalse(1),
		   eTrue(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Indicates if the Manual Feed Prompt will be displayed always		
                (eTrue), or only if the tray is not loaded (eFalse).
                Additional information:
                Indicates if the Manual Feed Prompt will be displayed 
                always (eFalse), or only if the tray is not loaded with the
                requested media. (eTrue)."
::= { settings-intray 18 }
               
               
tray1-media-size-loaded OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eFoolscap(10),
		   eROC16K(17),
		   eJISExecutive(18),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eJISB5(45),
		   eJapansePostcardDouble(72),
		   eMonarch(80),
		   eCommercial10(81),
		   eInternationalDL(90),
		   eInternationalC5(91),
		   eInternationalB5(100),
		   eCustom(101),
		   eAnyCustomSize(32764),
		   eAnySize(32765)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns the media size that is currently configuredconfigured		
                in tray #1. This object can be set to indicate the media size		
                currently loaded, if the printer supports input trays that can		
                not sense the media size. Complete list of supported media		
                sizes along with their dimensions are listed in the ''Media		
                Size Table'' near the end of this document.
                Additional information:
                Returns the media size that is currently 
                configuredconfigured in tray #1. This object can be set
                to indicate the media size currently loaded, if the
                printer supports input trays that can not sense the
                media size. Complete list of supported media sizes
                along with their dimensions are listed in the ''Media
                Size Table'' near the end of this document."
::= { intray1 1 }
               
               
tray1-phd OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the number of the Paper Handling Device that contains		
                this input tray.
                Additional information:
                Provides the number of the Paper Handling Device that
                contains this input tray."
::= { intray1 12 }
               
               
tray2-media-size-loaded OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eFoolscap(10),
		   eROC16K(17),
		   eJISExecutive(18),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eJISB5(45),
		   eCustom(101),
		   eAnyCustomSize(32764),
		   eAnySize(32765)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns the media size that is currently configured in tray #2.		
                Complete list of supported media sizes along with their		
                dimensions are listed in the ''Media Size Table'' near the end		
                of this document.
                Additional information:
                Returns the media size that is currently configured in
                tray #2."
::= { intray2 1 }
               
               
tray2-phd OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the number of the Paper Handling Device that contains		
                this input tray.
                Additional information:
                Provides the number of the Paper Handling Device that 
                contains this input tray."
::= { intray2 12 }
               
               
tray3-media-size-loaded OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eFoolscap(10),
		   eROC16K(17),
		   eJISExecutive(18),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eJISB5(45),
		   eCustom(101),
		   eAnyCustomSize(32764),
		   eAnySize(32765)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns the media size that is currently configured in tray #3.		
                Complete list of supported media sizes along with their		
                dimensions are listed in the ''Media Size Table'' near the end		
                of this document.
                Additional information:
                Returns the media size that is currently configured in
                tray #3."
::= { intray3 1 }
               
               
tray3-phd OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the number of the Paper Handling Device that contains		
                this input tray.
                Additional information:
                Provides the number of the Paper Handling Device that 
                contains this input tray."
::= { intray3 12 }
               
               
tray5-media-size-loaded OBJECT-TYPE
    SYNTAX  INTEGER {
		   eUSExecutive(1),
		   eUSLetter(2),
		   eUSLegal(3),
		   eFoolscap(10),
		   eROC16K(17),
		   eJISExecutive(18),
		   eISOandJISA5(25),
		   eISOandJISA4(26),
		   eJISB5(45),
		   eCustom(101),
		   eAnyCustomSize(32764),
		   eAnySize(32765)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns the media size that is currently configured in tray #5.		
                Complete list of supported media sizes along with their		
                dimensions are listed in the ''Media Size Table'' near the end		
                of this document.
                Additional information:
                Returns the media size that is currently configured in
                tray #5."
::= { intray5 1 }
               
               
tray5-phd OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the number of the Paper Handling Device that contains		
                this input tray.
                Additional information:
                Provides the number of the Paper Handling Device that
                contains this input tray."
::= { intray5 12 }
               
               
overflow-bin OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the bin that will be used for additional sheets		
                of media when the current bin is full and printing is allowed		
                to continue.
                Additional information:
                Returns or sets the bin that will be used for additional
                sheets of media when the current bin is full and
                printing is allowed to continue. 
                The data for this object is stored in NVRAM."
::= { settings-outbin 4 }
               
               
outbin1-override-mode OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the device behavior when this output bin		
                condition causes printing to stop.    	
                    cCancelJob - The device cancels the job.    	
                    cOutbinFullOverride - The device sends subsequent media to		
                        the overflow bin.    	
                    cOutbinAttentionOverride - The device ignores the attention		
                        condition and continues printing.    	
                    cBinderAttentionOverride - The device ignores the binder		
                        attention condition and continues printing.  
                Additional information:
                Returns or sets the device behavior when this output bin
                condition causes printing to stop.
                cCancelJob - The device cancels the job, regardless of other
                bit settings.
                cOutbinFullOverride - The device sends subsequent
                media to the overflow bin.  If this bin is the
                overflow bin, this bit is ignored.
                cOutbinAttentionOverride - The device ignores the
                attention condition and continues printing.
                cBinderAttentionOverride - The device ignores the
                binder attention condition and continues printing.
                
                This object describes the action that is performed when the
                JOB-OUTPUT-AUTO-CONTINUE-TIMEOUT expires. If no bits
                are set, no override action is taken (the printer
                will continue to wait)."
::= { outbin1 9 }
               
               
marker-density-calibration OBJECT-TYPE
    SYNTAX  INTEGER {
		   eNotCalibrating(1),
		   eCalibrateALL(2),
		   eCalibrateColor(3),
		   eCalibrateHalftone(4),
		   eCalibrateColorPlaneRegistration(5)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns the calibration status or triggers a calibration cycle.		
                All calibration procedures are used if set to eCalibrateALL. If		
                set to eCalibrateDMAX then a full density engine calibration is		
                triggered. If set to eCalibrateDHALF, then a Halftone		
                calibration is triggered.
                Additional information:
                Returns the calibration status or triggers a calibration 
                cycle. All calibration procedures are used if set to
                eCalibrateALL. If set to eCalibrateColor then a full
                density engine calibration is triggered. If set to
                eCalibrateHalftone, then a Halftone calibration is triggered.
                If set to eCalibrateColorPlaneRegistration, then a Color
                Plane Registration calibration is triggered. If set to
                eCalibrateDrumPhaseAdjustment, then a Drum Phase Adjustment
                calibration is triggered."
::= { settings-marking-agent 11 }
               
               
media-names-available OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The value of this object controls which of the MEDIAx-NAME		
                objects are supported. If a bit is set to zero, then attempting		
                to get or set the corresponding MEDIAx-NAME objects will return		
                <noSuchName>.
                Additional information:
                Setting a bit to one will cause the corresponding
                MEDIAn- objects to be available (attempting to access
                an unavailable object will return <noSuchName>).
                MEDIA1- objects are always present, as this is the default
                media. If this object is set to a value that does not include
                cMediaName2Available, that bit will be set and a status of
                <noError> will be returned."
::= { settings-print-media 1 }
               
               
north-edge-offset OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the number of 300 dpi dots by which the image		
                is shifted. Shift is relative to the leading edge of the medium		
                as the medium flows through the marking engine with the side to		
                be imaged facing the observer. The leading edge is the North		
                edge and the other edges are defined by the normal compass		
                layout of directions with the compass facing the observer. The		
                adjustment is for all pages printed. A positive value moves the		
                image away from the leading edge of the medium. A negative		
                value moves the image closer to the leading edge of the medium.		
                The value 0 will return the image to its factory default		
                position.
                Additional information:
                Returns or sets the number of 300 dpi dots by which the image is
                shifted.  Shift is relative to the leading edge of the medium as the
                medium flows through the marking engine with the side to be imaged
                facing the observer. The leading edge is the North edge and the
                other edges are defined by the normal compass layout of directions
                with the compass facing the ob server. The adjustment is for all
                pages printed. A positive value moves the image away from the leading
                edge of the medium. A negative value moves the image closer to the
                leading edge of the medium.  The value 0 will return the image to
                its factory default position.
                The value of this object is stored in NVRAM."
::= { settings-print-media 2 }
               
               
media1-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 1 name.
                Additional information:
                The symbol set for this string is Roman-8."
::= { media1 1 }
               
               
media1-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 1. The length		
                restriction is required to allow the media name to be displayed		
                on the device's control panel. The device POS must state the		
                maximum number of characters allowed. If the device also has a		
                limitation on what characters in a character set can be used		
                (e.g. only uppercase characters allowed), the POS should also		
                state character restrictions.
                Additional information:
                Length restricted version of the media name 1.  The
                length restriction is required to allow the media name
                to be displayed on the device's control panel.  
                The maximum supported string length is 9 characters. If 
                the user entered string is too long, the device will store
                the first 9 characters and will return the
                <noError> status.
                The characters must be in the range 20H to 7FH except 5C
                cannot be used. The default symbol set is Roman-8 for
                English; additional legal symbol sets are ISOLatin5,
                ISOLatin2 and Windows31J. Setting this object with characters
                outside of the range or of an illegal symbol set will cause an
                error status of <badValue> to be returned.
                This string is localized according to prtConsoleLocalization.
                If this object represents a standard type, and the user
                attempts to set the object, 'OK Nearest Legal Value Substituted'
                will be returned, and the standard value is retained.
                If this object represents a user defined type, and the user
                attempts to set the object, then the set will be successfull."
::= { media1 2 }
               
               
media1-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 1 that have been printed. The device		
                POS should state whether this value is lost across a power		
                cycle or kept in NVRAM.
                Additional information:
                Number of sheets of media 1 that have been printed.
                This page count is saved in NVRAM after every 10 
                pages. The maximum value is 4,294,967,295 which will never be
                reached in normal operation.
                The page count is incremented when a sheet of media is pulled 
                from an input tray. A duplex printed sheet will cause this 
                counter to be incremented by one."
::= { media1 3 }
               
               
media1-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                Displays the engine processing characterstics that are applied
                to this media type."
::= { media1 4 }
               
               
media2-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 2 name.
                Additional information:
                See MEDIA1-NAME."
::= { media2 1 }
               
               
media2-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 2. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media2 2 }
               
               
media2-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 2 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media2 3 }
               
               
media2-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media2 4 }
               
               
media3-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 3 name.
                Additional information:
                See MEDIA1-NAME."
::= { media3 1 }
               
               
media3-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 3. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media3 2 }
               
               
media3-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 3 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media3 3 }
               
               
media3-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media3 4 }
               
               
media4-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 4 name.
                Additional information:
                See MEDIA1-NAME."
::= { media4 1 }
               
               
media4-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 4. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media4 2 }
               
               
media4-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 4 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media4 3 }
               
               
media4-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media4 4 }
               
               
media5-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 5 name.
                Additional information:
                See MEDIA1-NAME."
::= { media5 1 }
               
               
media5-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 5. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media5 2 }
               
               
media5-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 5 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media5 3 }
               
               
media5-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media5 4 }
               
               
media6-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 6 name.
                Additional information:
                See MEDIA1-NAME."
::= { media6 1 }
               
               
media6-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 6. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media6 2 }
               
               
media6-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 6 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media6 3 }
               
               
media6-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media6 4 }
               
               
media7-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 7 name.
                Additional information:
                See MEDIA1-NAME."
::= { media7 1 }
               
               
media7-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 7. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media7 2 }
               
               
media7-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 7 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media7 3 }
               
               
media7-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media7 4 }
               
               
media8-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 8 name.
                Additional information:
                See MEDIA1-NAME."
::= { media8 1 }
               
               
media8-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 8. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media8 2 }
               
               
media8-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 8 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media8 3 }
               
               
media8-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media8 4 }
               
               
media9-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 9 name.
                Additional information:
                See MEDIA1-NAME."
::= { media9 1 }
               
               
media9-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 9. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media9 2 }
               
               
media9-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 9 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media9 3 }
               
               
media9-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media9 4 }
               
               
media10-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 10 name.
                Additional information:
                See MEDIA1-NAME."
::= { media10 1 }
               
               
media10-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 10. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media10 2 }
               
               
media10-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 10 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media10 3 }
               
               
media10-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media10 4 }
               
               
media11-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 11 name.
                Additional information:
                See MEDIA1-NAME."
::= { media11 1 }
               
               
media11-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 11. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media11 2 }
               
               
media11-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 11 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media11 3 }
               
               
media11-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media11 4 }
               
               
media12-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 12 name.
                Additional information:
                See MEDIA1-NAME."
::= { media12 1 }
               
               
media12-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 12. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media12 2 }
               
               
media12-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 12 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media12 3 }
               
               
media12-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media12 4 }
               
               
media13-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 13 name.
                Additional information:
                See MEDIA1-NAME."
::= { media13 1 }
               
               
media13-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 13. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media13 2 }
               
               
media13-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 13 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media13 3 }
               
               
media13-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media13 4 }
               
               
media14-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 14 name.
                Additional information:
                See MEDIA1-NAME."
::= { media14 1 }
               
               
media14-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 14. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media14 2 }
               
               
media14-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 14 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media14 3 }
               
               
media14-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media14 4 }
               
               
media15-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 15 name.
                Additional information:
                See MEDIA1-NAME."
::= { media15 1 }
               
               
media15-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 15. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media15 2 }
               
               
media15-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 15 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media15 3 }
               
               
media15-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media15 4 }
               
               
media16-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 16 name.
                Additional information:
                See MEDIA1-NAME."
::= { media16 1 }
               
               
media16-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 16. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media16 2 }
               
               
media16-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 16 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media16 3 }
               
               
media16-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media16 4 }
               
               
media17-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 17 name.
                Additional information:
                See MEDIA1-NAME."
::= { media17 1 }
               
               
media17-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 17. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media17 2 }
               
               
media17-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 17 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media17 3 }
               
               
media17-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media17 4 }
               
               
media18-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 18 name.
                Additional information:
                See MEDIA1-NAME."
::= { media18 1 }
               
               
media18-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 18. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media18 2 }
               
               
media18-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 18 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media18 3 }
               
               
media18-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media18 4 }
               
               
media19-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 19 name.
                Additional information:
                See MEDIA1-NAME."
::= { media19 1 }
               
               
media19-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 19. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media19 2 }
               
               
media19-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 19 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media19 3 }
               
               
media19-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media19 4 }
               
               
media20-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 20 name.
                Additional information:
                See MEDIA1-NAME."
::= { media20 1 }
               
               
media20-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 20. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media20 2 }
               
               
media20-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 20 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media20 3 }
               
               
media20-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media20 4 }
               
               
media21-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 21 name.
                Additional information:
                See MEDIA1-NAME."
::= { media21 1 }
               
               
media21-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 21. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media21 2 }
               
               
media21-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 21 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media21 3 }
               
               
media21-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media21 4 }
               
               
media22-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 22 name.
                Additional information:
                See MEDIA1-NAME."
::= { media22 1 }
               
               
media22-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 22. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media22 2 }
               
               
media22-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 22 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media22 3 }
               
               
media22-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media22 4 }
               
               
media23-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 23 name.
                Additional information:
                See MEDIA1-NAME."
::= { media23 1 }
               
               
media23-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 23. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media23 2 }
               
               
media23-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 23 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media23 3 }
               
               
media23-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media23 4 }
               
               
media24-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 24 name.
                Additional information:
                See MEDIA1-NAME."
::= { media24 1 }
               
               
media24-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 24. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media24 2 }
               
               
media24-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 24 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media24 3 }
               
               
media24-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media24 4 }
               
               
media25-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 25 name.
                Additional information:
                See MEDIA1-NAME."
::= { media25 1 }
               
               
media25-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 25. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media25 2 }
               
               
media25-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 25 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media25 3 }
               
               
media25-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media25 4 }
               
               
media26-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..24))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Media 26 name.
                Additional information:
                See MEDIA1-NAME."
::= { media26 1 }
               
               
media26-short-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(1..9))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Length restricted version of the media name 26. See		
                MEDIA1-SHORT-NAME for details.
                Additional information:
                See MEDIA1-SHORT-NAME."
::= { media26 2 }
               
               
media26-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Number of sheets of media 26 that have been printed. See		
                MEDIA1-PAGE-COUNT for details.
                Additional information:
                See MEDIA1-PAGE-COUNT."
::= { media26 3 }
               
               
media26-engine-media-mode OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The engine processing characteristics that are to be applied to		
                this media. The processing characteristics are device		
                specific.
                Additional information:
                See the description for MEDIA1-ENGINE-MEDIA-MODE."
::= { media26 4 }
               
               
engine-media-modes-supported1 OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The list of engine media modes supported by the device. The		
                modes are each separated by a comma character. An example		
                string would be: 'Normal,Rough,Low,Vellum'.
                Additional information:
                The list of engine media modes supported by the device. 
                The modes are each separated by a comma character. An
                example string would be: 'Normal,Rough,Low,Vellum'."
::= { media-modes 1 }
               
               
media-number-of-type-supported OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Indicates the maximum number of supported media types.
                Additional information:
                Indicates the number of supported media type.
                This also indicates which bit in
                MEDIA-NAMES-AVAILABLE is significant"
::= { media-types 1 }
               
               
non-assured-oht-page-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This is a count of the number of invalid (non-HP Laser Jet)		
                transparencies that have been printed on. This value is		
                incremented every time an invalid OHT is printed on It is reset		
                whenever the fuser count is set to 0.
                Additional information:
                This is a count of the number of invalid (non HP Laser Jet)
                transparencies that have been printed on. This value is
                incremented every time an invalid OHT is printed on. It is reset
                whenever the fuser count is set to 0."
::= { media-counts 1 }
               
               
media-size-west-edge-first-side-offset OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the number of 300 dpi dots by which the image		
                is shifted relative to the west edge of the medium (see		
                NORTH-EDGE-OFFSET). The adjustment is for the first printed		
                side of the medium only. A positive value moves the image away		
                from the west edge of the medium. A negative value moves the		
                image closer to the west edge of the medium. The value 0 will		
                return the image to its factory default position.
                Additional information:
                Returns or sets the number of 300 dpi dots by which the
                image is shifted relative to the west edge of the medium
                (see NORTH-EDGE-OFFSET). The adjustment is for the
                first printed side of the medium only. A positive value
                moves the image away from the west edge of the medium.
                A negative value moves the image closer to the west edge
                of the medium. The value 0 will return the image to its
                factory default position.
                The values in the sub array index are from the media size table
                in the hpmib. This adjustment is done on a paper size by paper
                size basis. The standard PCL5 codes for paper size are used for
                the value used in the OID. Please see S_ARRAY_SUB1 for legal "
::= { media-size 2 }
               
               
media-size-west-edge-second-side-offset OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the number of 300 dpi dots by which the image		
                is shifted relative to the west edge of the medium (see		
                NORTH-EDGE-OFFSET). The adjustment is for the second printed		
                side of the medium only. A positive value moves the image away		
                from the west edge of the medium. A negative value moves the		
                image closer to the west edge of the medium. The value 0 will		
                return the image to its factory default position.
                Additional information:
                Returns or sets the number of 300 dpi dots by which the
                image is shifted relative to the west edge of the medium
                (see NORTH-EDGE-OFFSET). The adjustment is for the
                second printed side of the medium only. A positive value
                moves the image away from the west edge of the medium.
                A negative value moves the image closer to the west edge
                of the medium. The value 0 will return the image to its
                factory default position. The values in the sub array index
                are from the media size table in the hpmib.
                This adjustment is done on a paper size by paper size basis.
                The standard PCL5 codes for paper size are used for the value
                used in the OID. Please see S_ARRAY_SUB1 for legal values.
                The data for this object is stored in NVRAM."
::= { media-size 3 }
               
               
media-size-west-edge-side-offset-by-tray OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or sets the number of 300 dpi dots by which the image		
                is shifted relative to the west edge of the medium (see		
                NORTH-EDGE-OFFSET). A positive value moves the image away from		
                the west edge of the medium. A negative value moves the image		
                closer to the west edge of the medium. The value 0 will return		
                the image to its factory default position. Each OID binding		
                corresponds to a valid tray number for this product. There can		
                be a maximum of 15 trays, a combination of internal and		
                external trays. Products that support other combinations of		
                trays will specify this information in the device pos. The data		
                for this object is stored in NVRAM.
                Additional information:
                Returns or sets the number of 300 dpi dots by which the
                image is shifted relative to the west edge of the medium
                (see NORTH-EDGE-OFFSET). A positive value moves the
                image away from the west edge of the medium. A negative
                value moves the image closer to the west edge of the medium.
                The value 0 will return the image to its factory default
                position.
                
                Each OID binding corresponds to a valid tray number
                for this product. There can be a maximum of 15 trays, a
                combination of internal and external trays. Products that
                support other combinations of trays will specify this
                information in the device pos. The data for this object
                is stored in NVRAM."
::= { media-size 4 }
               
               
color-supply-out-action OBJECT-TYPE
    SYNTAX  INTEGER {
		   eStop(1),
		   eAutoContinueBlack(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This PML Object can be used to change the behavior of the		
                printer when a Color Cartridge reaches OUT. When this PML		
                Object is set to eStop, the printer will be offline when a		
                Color Cartridge reaches OUT. When this PML Object is set to		
                eAutoContinueBlack, then the printer will continue printing in		
                Mono provided the Black cartridge has not reached OUT.
                Additional information:
                This corresponds to the menu setting 'Color Supply Out'.This
                object can be changed by the control panel or by the PJL 
                variable. It can have any of the following enumerated values-
                eStop(1), eAutoContinueBlack(2). "
::= { settings-system 34 }
               
               
printed-media-simplex-count OBJECT-TYPE
    SYNTAX  INTEGER(0..930576247)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of simplex pages printed in this media size.
                Additional information:
                The 5 usage (simplex/duplex count, simplex/duplex click
                charge and paper size total) objects described here and
                below detail the usage for the printer for each paper
                size defined in the PCL Implementor's Guide and in the
                Media Size Table in the hpmib.txt.  The OID binding is
                based on the click attribute and paper size.
                For example:
                
                The format for the OID is as follows:
                
                3.4.1.5.x.y
                <-----> | |
                |    |  \
                /     |  paper size
                /       \
                PRINTER-CLICK_TOTALS ROOT   \
                OID                      click attribute 1..5
                
                x values are 1..5:
                
                1) simplex count
                2) simplex click charge
                3) duplex count
                4) duplex click charge
                5) printer or scanner paper size total (i.e. depends if the
                root OID is referrring to the printer or scanner).
                
                y : paper size as defined in the Media Size Table in the
                hpmib.txt "
::= { printed-media-usage 1 }
               
               
printed-media-simplex-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Charge for each simplex page printed in this media size."
::= { printed-media-usage 2 }
               
               
printed-media-duplex-count OBJECT-TYPE
    SYNTAX  INTEGER(0..930576247)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of duplex pages printed in this media size."
::= { printed-media-usage 3 }
               
               
printed-media-duplex-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Charge for each duplex page printed in this media size.
                Additional information:
                The click charges for duplex printed media."
::= { printed-media-usage 4 }
               
               
printed-media-total-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The total charge for pages printed in this media size."
::= { printed-media-usage 5 }
               
               
printed-media-maximum-pixels-per-page OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The number of pixels required to completely fill a page of this		
                media size. The device POS will specify the resolution at which		
                this pixel count was calculated.
                Additional information:
                The number of pixels required to fill a page of a
                specific media size.  The OID binding is the media
                size you to query for.  Only media sizes which the
                printer supports will be available."
::= { printed-media-usage 6 }
               
               
printed-media-combined-total OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of letter equivalently weighted pages both color		
                and mono combined with this printer.
                Additional information:
                The combined total per page size of simplex and duplex
                color pages plus simplex and duplex mono pages."
::= { printed-media-usage 7 }
               
               
printed-media-dimplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of mono dimplex pages printed in this media size.		
                A dimplex page is one that has been printed in duplex mode but		
                the back side is blank. Dimplex pages occur when the printer		
                firmware inserts a blank page in order to complete a duplexed		
                job which is sent to the printer with an odd number of pages."
::= { printed-media-usage 10 }
               
               
usage-printer-total-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total printer charge for all paper sizes printed."
::= { printer-accounting 2 }
               
               
usage-average-toner-coverage OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Reports the average toner area coverage of all pages printed		
                over the life of the device. Counts pixels on each page,		
                divides pixel count by pixels possible on a page to give the		
                percentage of coverage, and keeps a rolling average percent		
                weighted by area printed."
::= { printer-accounting 3 }
               
               
usage-staple-count OBJECT-TYPE
    SYNTAX  INTEGER(0..930576247)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of staples used."
::= { printer-accounting 4 }
               
               
usage-instructions-line1 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The first line of usage instructions for the device		
                user.Appears on Line 1 of the usage page."
::= { printer-accounting 5 }
               
               
usage-instructions-line2 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The second line of usage instructions for the device		
                user.Appears on Line 1 of the usage page."
::= { printer-accounting 6 }
               
               
usage-instructions-line3 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The third line of usage instructions for the device		
                user.Appears on Line 1 of the usage page."
::= { printer-accounting 7 }
               
               
usage-instructions-line4 OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..40))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "The fourth line of usage instructions for the device		
                user.Appears on Line 1 of the usage page."
::= { printer-accounting 8 }
               
               
printed-modes-usage-total OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                " This object reports the total color and mono print modes usage		
                for the life of the printer. This value is reported on the		
                usage page."
::= { printer-accounting 9 }
               
               
source-tray-usage-total OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object reports the total source tray usage for the life of		
                the printer. This value is reported on the usage page."
::= { printer-accounting 10 }
               
               
destination-bin-usage-total OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object reports the total destination bin usage for the		
                life of the printer. This value is reported on the usage page."
::= { printer-accounting 11 }
               
               
usage-printer-mono-total-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total printer charge for all paper sizes printed in monochrome		
                only.
                Additional information:
                This is the total charge over the range of all
                supported media sizes for duplex and simplex mono
                pages."
::= { printer-accounting 12 }
               
               
usage-printer-color-total-charge OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total printer charge for all paper sizes printed in color		
                only.
                Additional information:
                This is the total charge over the range of all
                supported media sizes for duplex and simplex color
                pages."
::= { printer-accounting 13 }
               
               
printed-media-color-simplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of color simplex pages printed in this media		
                size."
::= { printed-media-color-usage 1 }
               
               
printed-media-color-duplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of color duplex pages printed in this media size."
::= { printed-media-color-usage 3 }
               
               
printed-media-color-total-count OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The total count for color pages printed in this media size."
::= { printed-media-color-usage 5 }
               
               
printed-media-color-dimplex-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of color dimplex pages printed in this media size.		
                A color dimplex page is a color page that has been printed in		
                duplex mode but the back side is blank. Dimplex pages occur		
                when the printer firmware inserts a blank page in order to		
                complete a duplexed job which is sent to the printer with an		
                odd number of pages."
::= { printed-media-color-usage 6 }
               
               
printed-modes-mono-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of mono pages printed in this fuser mode."
::= { printed-modes-usage 1 }
               
               
printed-modes-color-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of color pages printed in this fuser mode."
::= { printed-modes-usage 3 }
               
               
printed-modes-total-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The total count for pages printed in this fuser mode."
::= { printed-modes-usage 5 }
               
               
source-tray-usage-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of pages printed from this source tray.
                Additional information:
                This object will track how many images have been printed
                with the original source tray as one of the following:
                1.  Envelope Feeder
                2.  Manual Feed Tray
                3.  Tray 1
                4.  Tray 2
                5.  Tray 3
                6.  External Tray
                7.  Other"
::= { source-tray-usage 1 }
               
               
destination-bin-usage-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Total number of pages printed to this destination bin.
                Additional information:
                This object will track how many images have been printed
                with the original destination bin as one of the following:
                1.  Face Down Bin
                2.  Face Up Bin
                3.  External Bin
                4.  Other"
::= { destination-bin-usage 1 }
               
               
low-marking-agent-processing OBJECT-TYPE
    SYNTAX  INTEGER {
		   eStop(1),
		   eCont(2)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Returns or changes how the device processes a low marking agent		
                event. If eCont, then the device continues to print. If eStop,		
                then the device stops until a continue event occurs."
::= { settings-marking-agent 3 }
               
               
out-marking-agent-processing OBJECT-TYPE
    SYNTAX  INTEGER {
		   eStop(1),
		   eCont(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Returns or changes how the device processes an out marking		
                agent event. If eCont, then the device continues to print. If		
                eStop, then the device stops until a continue event occurs."
::= { settings-marking-agent 10 }
               
               
media-size-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "The number of impressions printed on sheets of this media size.		
                The device POS should state whether this value is lost across a		
                power cycle or is kept in permanent storage.
                Additional information:
                The value of this object is persistent across a power cycle.  
                
                The index for these objects, the last number of the OID, uniquely
                identifies the paper size. This value corresponds to the page sizes listed below.
                These values are also documented in the PCL Implementor's Guide
                and the PML Master MIB.  
                
                1 US-Executive  
                2 US-Letter  
                3 US-Legal  
                10 8.5 x 13   
                11 eLedger  
                17 ROC 16K  
                18 JIS Executive  
                19 eROC8K  
                25 ISO and JIS A5  
                26 ISO and JIS A4  
                27 ISO and JIS A3  
                45 JIS B5  
                46 JIS B4  
                65 ISO B5  
                72 eJapanesePostcardDouble    
                80 Monarch  
                81 Commercal-10  
                90 International DL  
                91 International C5  
                100 International B5  
                101 Custom  
                258 eUSLetterR  
                282 ISO JISA4R  
                32767 Unknown Paper Size"
::= { media-size 1 }
               
               
consumable-status-cartridge-model OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..24))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the cartridge model number		
                associated with this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 1 }
               
               
consumable-status-manufacturing-date OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..24))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the date on which this consumable		
                was manufactured. The format of the string is 'YYYYMMDD'.		
                Where:    	
                    YYYY is the year.    	
                    MM is the month (1-12).    	
                    DD is the day (1-31).   
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 2 }
               
               
consumable-status-serial-number OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..24))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the serial number for this		
                consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 3 }
               
               
consumable-status-capacity-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePagesAt5PercentCoverage(1),
		   e1KPagesAt5PercentCoverage(2),
		   e10KPagesAt5PercentCoverage(3)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the usage units used by the		
                CONSUMABLE-STATUS-TOTAL-CAPACITY object.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 4 }
               
               
consumable-status-total-capacity OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the total capacity of a new		
                consumable of this type. The PML object		
                CONSUMABLE-STATUS-CAPACITY-UNITS can be used to determine the		
                units of measure for this PML object.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 5 }
               
               
consumable-status-info OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This object is used to read and write the various status flags		
                supported by this consumable. For LJ4100, LJ4550 the collection		
                bits supported include:    	
                    cMarkedAsReordered - indicates the consumable has been		
                        reordered. This is the only bit that can be both read		
                        and written.    	
                    cTonerLowCondition - indicates a toner low condition has		
                        occured. This bit in the collection is read-only to		
                        PML.    	
                    cTonerOutCondition - indicates a toner out condition has		
                        occured. This bit in the collection is read-only to		
                        PML.    	
                    cDeveloperLowCondition - indicates a developer low		
                        condition has occured. This bit in the collection is		
                        read-only to PML.    	
                    cDeveloperOutCondition - indicates a developer out		
                        condition has occured. This bit in the collection is		
                        read-only to PML.    	
                    cDrumLowCondition - indicates a drum low condition has		
                        occured. This bit in the collection is read-only to		
                        PML.    	
                    cDrumOutCondition - indicates a drum out condition has		
                        occured. This bit in the collection is read-only to		
                        PML.    	
                    cWasteTonerFullCondition - indicates a waste toner full		
                        condition has occured. This bit in the collection is		
                        read-only to PML.    	
                    cWasteTonerFullWarningCondition - indicates a waste toner		
                        full warning condition has occured. This bit in the		
                        collection is read-only to PML.    	
                    cNewConsumable - indicates the consumable is new and has		
                        never been used. This bit in the collection is		
                        read-only to PML.    	
                    cAnyPartLowCondition - indicates that at least one part of		
                        this consumable has reached a low condition. This bit		
                        in the collection is read-only to PML.    	
                    cAnyPartOutCondition - indicates that at least one part of		
                        this consumable has reached an out condition. This bit		
                        in the collection is read-only to PML.    	
                
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 7 }
               
               
consumable-status-first-install-date OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..24))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the date on which this consumable		
                was first installed. The format of the string is 'YYYYMMDD'.		
                Where:    	
                    YYYY is the year.    	
                    MM is the month (1-12).    	
                    DD is the day (1-31).    	
                The device POS needs to indicate what will be written in the		
                event the printer does not have a real time clock.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist. For printers without internal clocks, the 
                date will always be 20000101."
::= { consumable-status 8 }
               
               
consumable-status-last-use-date OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..24))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the date on which this consumable		
                was last used. The format of the string is 'YYYYMMDD'. Where:		
                   	
                    YYYY is the year.    	
                    MM is the month (1-12).    	
                    DD is the day (1-31).    	
                The device POS needs to indicate what will be written in the		
                event the printer does not have a real time clock.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist. For printers without internal clocks, the 
                date will always be 20000101."
::= { consumable-status 9 }
               
               
consumable-status-page-count-legal OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable that are of the specified media		
                size - Legal.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 11 }
               
               
consumable-status-page-count-a4-letter OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable that are of the specified media		
                size - A4 or Letter.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 12 }
               
               
consumable-status-page-count-xy-other OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable that are of the specified media		
                size - XY or Other.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 15 }
               
               
consumable-status-job-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of jobs that have been		
                printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 16 }
               
               
consumable-status-usage-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePixels(1),
		   eTenthsOfGrams(2),
		   eGrams(3),
		   eRotations(4),
		   ePages(5),
		   eImpressions(6),
		   ePercentLifeRemaining(7),
		   eOther(8)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the units used to measure the		
                capacity of this consumable.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 17 }
               
               
consumable-status-usage-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of usage units that		
                remain in this consumable. The units of measurement used by		
                this object can be obtained by querying the		
                CONSUMABLE-STATUS-USAGE-UNITS object.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 18 }
               
               
consumable-status-manufacturer-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the name of the manufacturer of		
                this consumable. The device POS will specify the set of		
                manufacturers that could be returned.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 19 }
               
               
consumable-status-oem-name OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..8))
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the name of the OEM of this		
                consumable. This object will typically return the string 'HP'.		
                The device POS will specify if other OEM consumables are		
                supported.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist. This object should always return 'HP' as
                the OEM name"
::= { consumable-status 20 }
               
               
consumable-status-engine-usage-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePixels(1),
		   eTenthsOfGrams(2),
		   eGrams(3),
		   eRotations(4),
		   ePages(5),
		   eImpressions(6),
		   ePercentLifeRemaining(7),
		   eOther(8)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the units used to measure the		
                capacity of this consumable as reported by the Engine.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 21 }
               
               
consumable-status-engine-usage-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of usage units,		
                estimated by the engine, that remain in this consumable. The		
                units of measurement used by this object can be obtained by		
                querying the CONSUMABLE-STATUS-ENGINE-USAGE-UNITS object.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 22 }
               
               
consumable-status-engine-job-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of jobs, as reported		
                by the printer, that have been printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 23 }
               
               
consumable-status-total-page-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the total number of pages that		
                have been printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 24 }
               
               
consumable-status-mono-page-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of monochrome pages		
                that have been printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 25 }
               
               
consumable-status-color-page-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of color pages that		
                have been printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 26 }
               
               
consumable-status-total-equiv-page-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the total number of equivelent		
                Letter/A4 pages that have been printed by this consumable.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 27 }
               
               
consumable-status-input-option-sheet-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable that had the input option as		
                their source.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 30 }
               
               
consumable-status-duplex-sheet-count OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable that were also duplexed		
                (printed both sides).
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 31 }
               
               
consumable-status-page-count-half-speed OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable at one half engine speed.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 32 }
               
               
consumable-status-page-count-quarter-speed OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable at one quarter engine speed.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 33 }
               
               
consumable-status-page-count-third-speed OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of pages that have		
                been printed by this consumable at one third engine speed.
                Additional information:
                This object will only exist for Authentic HP consumables.
                If the cartridge is deemed to be NonHP, then this object
                will not exist."
::= { consumable-status 34 }
               
               
consumable-status-developer-life-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePixels(1),
		   eTenthsOfGrams(2),
		   eGrams(3),
		   eRotations(4),
		   ePages(5),
		   eImpressions(6),
		   ePercentLifeRemaining(7),
		   eOther(8)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the units used to measure the		
                developer life remaining.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 36 }
               
               
consumable-status-developer-life OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of life units,		
                remaining in the developer. The units of measurement used by		
                this object can be obtained by querying the		
                CONSUMABLE-STATUS-DEVELOPER-LIFE-UNITS object. This object will		
                not exist if this consumable does not contain a developer.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 37 }
               
               
consumable-status-drum-life-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePixels(1),
		   eTenthsOfGrams(2),
		   eGrams(3),
		   eRotations(4),
		   ePages(5),
		   eImpressions(6),
		   ePercentLifeRemaining(7),
		   eOther(8)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the units used to measure the		
                drum life remaining.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 38 }
               
               
consumable-status-drum-life OBJECT-TYPE
    SYNTAX  INTEGER(0..65535)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of life units,		
                remaining in the drum. The units of measurement used by this		
                object can be obtained by querying the CONSUMABLE-		
                STATUS-DRUM-LIFE-UNITS object. This object will not exist if		
                this consumable does not contain a drum.
                Additional information:
                This object will only exist on engines that are E-Label
                capable, but will exist on these engines regardless of 
                the cartridge being Authentic HP or NonHP.  This object 
                can be used to ensure the capability of the E-Label 
                feature for a given engine."
::= { consumable-status 39 }
               
               
consumable-status-authentication OBJECT-TYPE
    SYNTAX  INTEGER {
		   eAuthLevel1(1),
		   eAuthLevel2(2),
		   eAuthLevel3(3),
		   eAuthLevel4(4)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object returns the authentication level of the elabel on		
                the given supply. The elabel authentication is returned via the		
                appropriate enum.
                Additional information:
                There are four levels of authentication of an ELabel
                cartridge supported.  Each ELabel cartridges level of
                authentication is provided here, via this enumeration."
::= { consumable-status 40 }
               
               
consumable-status-formatter-color-page-count OBJECT-TYPE
    SYNTAX  INTEGER(0..32768)
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report the number of color pages that		
                have been printed by this consumable.
                Additional information:
                 This object is used to report the number of color pages that
                have been printed by a consumable."
::= { consumable-status 46 }
               
               
consumable-reorder-url OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..64))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "This object is used to read and write the URL that can be used		
                to reorder consumables for this device. This URL is set at the		
                factory but can be updated by a reseller or third party.
                Additional information:
                The URL can be up to 64 characters long."
::= { consumables 2 }
               
               
consumable-current-state OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object returns the current state of the selected		
                consumable. These are the possible states, whenever a		
                consumable is in one of these states the appropiate bit is set.		
                For non-cartridge supplies the only states available are		
                cLowCondition(11), cOutCondition(12), and cMissing(14).
                Additional information:
                This object returns the current state of the particular consumable.
                cAuthLevel1 - Consumable is at Authentication Level 1
                cAuthLevel2 - Consumable is at Authentication Level 2
                cAuthLevel3 - Consumable is at Authentication Level 3
                cAuthLevel4 - Consumable is at Authentication Level 4
                cGenuineHPUnsupported - Cartridge is GenuineHP intended for another product
                cDefectiveMemory - Cartridge has a Defective Memory
                cMissingMemory - Memory is Missing from the Cartridge
                cLowCondition - Consumable has reached its low threshold
                cOutCondition - Consumable has reached its out threshold
                cIncorrect - Cartridge inserted is not the correct one
                cMissing - Consumable is Missing from the Printer
                cStatusAreValid - The Status reported on other bits are valid only if
                this bit is set to 1. If it is 0, the values are invalid.
                These are the possible states and whenever a Consumable is in any of these
                states, the appropriate bit will be set. For Non Cartridge Supplies only
                cLowCondition, cOutCondition and cMissing will be supported."
::= { consumables 7 }
               
               
consumable-life-usage-units-remaining OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object reports the current estimate of the number of usage		
                units that remain before this supply is depleted. An installed		
                supply that cannot report such a number will return a value of		
                -2. It is the reponsibility of the host application to query		
                each supply in order to determine an overall device		
                USAGE-UNITS-REMAINING number - the lowest value returned. The		
                unit of measure for this life estimate is determined by reading		
                the corresponding CONSUMABLE-LIFE-USAGE-UNITS object.
                Additional information:
                This object will return the Pages or Estimated Pages remaining for 
                the speciffic supply requested by the leaf node of this object."
::= { consumables-life 1 }
               
               
consumable-life-usage-units OBJECT-TYPE
    SYNTAX  INTEGER {
		   ePagesRemaining(1),
		   eEstimatedPagesRemaining(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object reports current usage units in use by the		
                corresponding CONSUMABLE-LIFE-USAGE-UNITS-REMAINING object.
                Additional information:
                This object returns the units that CONSUMABLE-LIFE-USAGE-UNITS-REMAINING
                is returned in.  Either ePagesRemaining(1) or eEstimatedPagesRemaining(2)."
::= { consumables-life 2 }
               
               
consumable-life-low-threshold OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to report and modify a threshold value		
                indicating the point in the life of a consumable or supply at		
                which a transition to a LOW state will occur."
::= { consumables-life 3 }
               
               
printer-average-marking-agent-coverage OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the average marking agent coverage		
                for a given color plane. It is a real number that represents		
                percentage full and will read from 0 to 100%. This object		
                obsoletes or replaces USAGE-AVERAGE-TONER-COVERAGE which could		
                only be used for black toner coverage information.
                Additional information:
                The average percent of toner coverage for a specific
                color plane.  The OID binding is the color plane.
                Only color planes which the printer supports will be
                available.  This is only available if a hard disk is
                installed."
::= { printer-average 1 }
               
               
printer-average-marking-agent-coverage-sum OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the accumulated sum of the percent		
                coverage numbers calculated on a per page basis over the life		
                of the printer.
                Additional information:
                The sum of the percent toner coverages for all
                impressions printed.  The OID binding is the color
                plane.  Only color planes which the printer supports
                will be available."
::= { printer-average 2 }
               
               
printer-average-marking-agent-coverage-sum-squared OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the accumulated sum of the squares		
                of the percent coverage numbers calculated on a per page basis		
                over the life of the printer.
                Additional information:
                The sum of the percent toner coverages squared for
                all impressions printed.  The OID binding is the
                color plane.  Only color planes which the printer
                supports will be available."
::= { printer-average 3 }
               
               
printer-average-marking-agent-units-per-gram OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the marking agent units of measure		
                per gram. This is typically a conversion factor for converting		
                pixels of toner to grams. This pixels-per-gram value is used to		
                calculate the estimated number of pages remaining for a given		
                marking agent."
::= { printer-average 4 }
               
               
printer-average-marking-agent-coverage-actual OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object is used to read the actual average marking agent		
                coverage for a given color plane. It is a real number that		
                represents percent coverage and will read from 0 to 100%. This		
                object will return the same value as		
                PRINTER-AVERAGE-MARKING-AGENT-COVERAGE except under certain		
                conditions which will be specified in the device POS.
                Additional information:
                This object will return the historical page coverage based on 
                the specific supply requested.  It is not based on the printers 
                historical value"
::= { printer-average 5 }
               
               
web-server-password OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..16))
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "A user-defined password that the Embedded Web Server and Web		
                JetAdmin will use to set the password for configuring the		
                Embedded Web Server on a printer. The device POS will specify		
                any limitation on the size of the password."
::= { settings-webserver 1 }
               
               
web-server-security OBJECT-TYPE
    SYNTAX  OCTET STRING
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Each collection bit represents a device or Embedded Web Server		
                feature that can be enabled or disabled via this object."
::= { settings-webserver 3 }
               
               
firmware-download-write-status-supported OBJECT-TYPE
    SYNTAX  INTEGER {
		   eFalse(1),
		   eTrue(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object provides information on whether the printer has the		
                ability to communicate the write-status of the firmware		
                download while the download is taking place."
::= { firmware-download 1 }
               
               
firmware-download-write-time OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "If the design of the firmware-download implementation does not		
                allow PML interaction during the download process, this value		
                provides an estimation of the time where the printer will not		
                be able to engage in PML communication.
                Additional information:
                If the design of the firmware-download 
                			implementation does not allow PML interaction during 
                			the download process, this value provides an 
                			estimation of the time where the printer will not be 
                			able to engage in PML communication. The calculated
                			time is expected to be 140 secs. However, this time
                			may increase as high as 280 secs as the flash part 
                			nears the maximum flash count."
::= { firmware-download 2 }
               
               
firmware-download-write-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Tells the number of times that firmware has been downloaded to		
                the flash part.
                Additional information:
                Tells the number of times that firmware has been
                	downloaded to the flash part. The default value will
                			vary depending on how many times the firmware is
                			rolled before shipping."
::= { firmware-download 3 }
               
               
firmware-download-current-state OBJECT-TYPE
    SYNTAX  INTEGER {
		   eIdle(1),
		   eReceivingImage(2),
		   eReceivedImageError(3),
		   eVerifyingImage(4),
		   eVerifiedImageError(5),
		   eWritingImage(6),
		   eWritingImageError(7),
		   eDownloadComplete(8),
		   eOKtoShutDown(9),
		   eCancelDownload(10),
		   eShuttingDown(11)
		   }
    ACCESS  read-write
    STATUS  optional
    DESCRIPTION
                "Provides the current or last reportable state of the firmware		
                download process. The current state may not necessarily be the		
                current state, but could be the post-mortem state."
::= { firmware-download 4 }
               
               
firmware-download-maximum-write-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Reports the manufacturer specified number of times that		
                firmware can be downloaded to the flash part. A value of -1		
                means that there is no limit. A value of 0 means that		
                downloading firmware is not permitted by this part. Any other		
                positive integer value corresponds to the number of times that		
                firmware can be downloaded to the flash part.
                Additional information:
                Reports the manufacturer specified number of 
                			times that firmware can be downloaded to the flash 
                			part.  A value of -1 means that there is no limit.  
                			A value of 0 means that downloading firmware is not 
                			permitted by this part.  Any other positive integer 
                			value corresponds to the number of times that 
                			firmware can be downloaded to the flash part. The 
                			current maximum write count is 500. This may change
                			as flash technology evolves."
::= { firmware-download 5 }
               
               
firmware-download-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
                "This returns the name of the printer. This should match the		
                name in the header of the upgrade image being sent to the flash		
                part. If the name does not match with the name returned then		
                the image that we are attempting to download does not upgrade		
                the printer firmware.
                Additional information:
                This object returns the HP name of the printer.  
                			     This should match what is in the PJL header of the RFU job
                			     Web Jet Admin uses this to ensure the printer is available
                		   	     to be upgraded."
::= { firmware-download 6 }
               
               
firmware-download-version OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
                "This object will return a string value representing the current		
                revision of firmware that the printer is operating with. This		
                is used to determine if code needs to be upgraded when an		
                firmware bundle comes in, in an upgrade job.
                Additional information:
                Web Jet Admin uses the version string that is returned to
                			     determine what peices of an RFU bundle need to be upgraded 
                			     when an RFU job is being built. This objects will return
                			     the version string of the printer."
::= { firmware-download 7 }
               
               
upgradable-devices-write-status-supported OBJECT-TYPE
    SYNTAX  INTEGER {
		   eFalse(1),
		   eTrue(2)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "This object provides information on whether the upgradable		
                device has the ability to communicate the write-status of the		
                upgrade while the upgrade is taking place."
::= { upgradable-devices 1 }
               
               
upgradable-devices-write-time OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "If the design of the device upgrade implementation does not		
                allow PML interaction during the download process, this value		
                provides an estimation of the time where the device will not be		
                able to engage in PML communication. The time returned will		
                depend upon what device is attempting to be upgraded."
::= { upgradable-devices 2 }
               
               
upgradable-devices-write-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Tells the number of times that firmware for device X has been		
                downloaded to the flash part. The default value will vary		
                depending on how many times the firmware is rolled before		
                shipping."
::= { upgradable-devices 3 }
               
               
upgradable-devices-current-state OBJECT-TYPE
    SYNTAX  INTEGER {
		   eIdle(1),
		   eReceivedImage(2),
		   eReceivedImageError(3),
		   eVerifiedImage(4),
		   eVerifiedImageError(5),
		   eWritingImage(6),
		   eWritingImageError(7),
		   eUpgradeComplete(8)
		   }
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Provides the current or last reportable state of the device		
                upgrade process. The current state may not necessarily be the		
                current state, but could be the post-mortem state."
::= { upgradable-devices 4 }
               
               
upgradable-devices-max-write-count OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  optional
    DESCRIPTION
                "Reports the manufacturer specified number of times that		
                firmware for device X can be downloaded to the flash part. A		
                value of -1 means that there is no limit. A value of 0 means		
                that downloading firmware is not permitted by this part. Any		
                other positive integer value corresponds to the number of times		
                that the firmware for device X can be downloaded to the flash		
                part. The current maximum write count is 500. This may change		
                as flash technology evolves."
::= { upgradable-devices 5 }
               
               
upgradable-devices-name OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
                "This returns the name of the upgradable device. This should		
                match the name in the header of the upgrade image being sent to		
                the flash part. If the name does not match with any of the		
                names returned then the device that we are attempting to		
                upgrade is unavailable for upgrading.
                Additional information:
                This object returns the HP name of the printer and the upgradable
                			     devices. There is one Name object per upgradable device.  
                			     This should match what is in the PJL header of the RFU job
                			     Web Jet Admin uses this to ensure the printer or device  is
                			     available to be upgraded."
::= { upgradable-devices 6 }
               
               
upgradable-devices-version OBJECT-TYPE
    SYNTAX  DisplayString
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
                "This object will return a string value representing the current		
                revision of firmware that device X is operating with. This is		
                used to determine if code needs to be upgraded when an firmware		
                bundle comes in, in an upgrade job.
                Additional information:
                Web Jet Admin uses the version string that is returned to
                			     determine what peices of an RFU bundle need to be upgraded 
                			     when an RFU job is being built. This internal object will 
                			     return the current version string of the printer or device 
                			     that it corresponds to."
::= { upgradable-devices 7 }
               
               
remote-upgrade-enable OBJECT-TYPE
    SYNTAX  INTEGER {
		   eOff(1),
		   eOn(2)
		   }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
                "Enables or disables the ability to upgrade the firmware		
                associated with any device that is available to be upgraded.		
                This will be set to on or off at the RFU level in that if this		
                mode is on any available device can be upgraded and if this		
                mode is off none of the devices can be upgraded. There is not		
                an individual mode for each device. Trying to set this to a		
                value other than eOn or eOff will cause an UnsupportedValue		
                error to occur."
::= { upgradable-devices 8 }
               
               
END

