HP-ICF-BASIC DEFINITIONS ::= BEGIN

    IMPORTS
        Integer32, IpAddress, Counter32, Unsigned32,
        OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
            FROM SNMPv2-SMI
        MacAddress, TruthValue, RowStatus, DisplayString,
        TDomain, TAddress, StorageType, TimeStamp,TimeInterval
            FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
            FROM SNMPv2-CONF
        ifIndex
            FROM IF-MIB
        entLogicalIndex
            FROM ENTITY-MIB
        alarmEntry, eventEntry
            FROM RMON-MIB
        InetAddress, InetAddressType
            FROM INET-ADDRESS-MIB
        hpicfObjectModules, hpicfCommon, hpicfCommonTrapsPrefix
            FROM HP-ICF-OID
        snmpTargetAddrEntry
            FROM SNMP-TARGET-MIB
        SnmpAdminString
            FROM SNMP-FRAMEWORK-MIB;

    hpicfBasicMib MODULE-IDENTITY
        LAST-UPDATED "202011170000Z"  -- November 17, 2020
        ORGANIZATION "HP Networking"
        CONTACT-INFO "Hewlett Packard Company
                     8000 Foothills Blvd.
                     Roseville, CA 95747"

        DESCRIPTION  "This MIB module describes objects for basic
                     management of devices in the HP Integrated
                     Communication Facility product line."

        REVISION     "202011170000Z"  -- November 17, 2020
        DESCRIPTION  "Added object hpicfSwitchSnmpEnabledTrapEventList
                     Deprecated group hpicfSNMPConfigGroup1 and
                     compliance hpicfBasicSNMPConfigCompliance1.
                     Added group hpicfSNMPConfigGroup2 and
                     compliance hpicfBasicSNMPConfigCompliance2"

        REVISION     "201904110000Z"  -- April 11, 2019
        DESCRIPTION  "Description has been changed for hpicfIncludeCredClearPassKey
                      MIB object in 'hpicfBasicConfig' table."

        REVISION     "201904030000Z"  -- April 03, 2019
        DESCRIPTION  "Added hpicfIncludeCredClearPassKey MIB object
                      to 'hpicfBasicConfig' table."

        REVISION     "201707030000Z"  -- Jul 03, 2017
        DESCRIPTION  "Added Per IP Logging filter table and 
                      Logging url table"

        REVISION     "201609160000Z"  -- Sep 16, 2016
        DESCRIPTION  "Added hpicfBasicWebAgentInterface"

        REVISION     "201501310000Z"  -- Jan 31, 2015
        DESCRIPTION  "Added object hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
                     and hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy.
                     Added group hpicfSNMPConfigGroup1 and
                     compliance hpicfBasicSNMPConfigCompliance1."

        REVISION     "201306121441Z"  -- June 12, 2013
        DESCRIPTION  "Added object hpicfLastLoginBannerStatus and tables
                     hpicfBasicLogFiltersTable and
                     hpicfBasicLogSubFiltersTable. Added compliance
                     hpicfBasicLogFilterConfigCompliance and group  hpicfBasicLogFilterConfigGroup."

        REVISION     "201305292100Z"  -- May 29, 2013
        DESCRIPTION  "Added hpicfBasicWebMgmtObjects,
                      hpicfBasicWebAgentIdleTime,
                      hpicfBasicCompliance13,
                      hpicfBasicWebAgentGroup1,
                      Deprecated hpicfBasicWebAgentGroup,
                      hpicfBasicCompliance8,
                      and hpicfBasicCompliance12"

        REVISION      "201302101357Z"  -- Feb 10, 2013
        DESCRIPTION  "Added hpicfBasicDNSConfigGroup2,
                      hpicfBasicDNSConfigGroup2,hpicfBasicCompliance11,
                      hpicfBasicCompliance12 and deprecated hpicfCurDNSDefaultDomainSuffix,
                      hpicfDNSDefaultDomainSuffix object, hpicfBasicDNSGroup2,
                      hpicfBasicDNSConfigGroup2, hpicfBasicCompliance9,
                      hpicfBasicCompliance7."

        REVISION     "201210110000Z"  -- October 11, 2012
        DESCRIPTION  "Added 'hpicfBasicLogFiltersTable' and
                     'hpicfBasicLogSubFiltersTable' tables."

        REVISION     "201207101357Z"  -- July 10, 2012
        DESCRIPTION  "hpicfBannerExec deprecated and hpicfBannerExec1
                      newly added."

        REVISION     "201203271300Z"  -- March 27, 2012
        DESCRIPTION  "Added hpicfDNSDomainSuffixTable object"

        REVISION     "201108301357Z"  -- August 30, 2011
        DESCRIPTION  "Added hpicfDNSConfigMode, hpicfCurDNSConfig
                      objects."

        REVISION     "201011111357Z"  -- November 11, 2010
        DESCRIPTION  "Added new option radiusTacacsOnly to
                      hpicfIncludeCredentials MIB object
                      in 'hpicfBasicConfig' table."

        REVISION     "201004101539Z"  -- April 27, 2010
        DESCRIPTION  "Added 'hpicfDNSDefaultDomainSuffixIsOobm' MIB object
                      in 'hpicfBasicDNSConfig' table."

        REVISION     "200911021357Z"  -- November 2, 2009
        DESCRIPTION  "Added objects hpicfExecBannerStatus and hpicfBannerExec"

        REVISION     "200902230000Z"  -- February 23, 2009
        DESCRIPTION  "Added objects hpicfReloadState, hpicfReloadAfter,
                      hpicfReloadAt"

        REVISION     "200902101539Z"  -- February 10, 2009
        DESCRIPTION  "Added 'hpicfInetDNSNameServerEntryIsOobm' MIB object
                      in 'hpicfInetDNSNameServersTable' table."

        REVISION     "200902030000Z"  -- Feb 3, 2009
        DESCRIPTION  "Added hpicfDisplayLogNumbers,
                      hpicfIncludeCredentials objects."

        REVISION     "200812040000Z"  -- December 4, 2008
        DESCRIPTION  "Added hpicfSnmpV2Enable
                      hpSwitchSnmpViewConfig objects."

        REVISION     "200804040000Z"  -- April 04, 2008
        DESCRIPTION  "Deprecated object hpicfTelnet6Enable"

        REVISION     "200709130000Z"  -- Sept 13, 2007
        DESCRIPTION  "Limit the size to 1300 for the hpicfBannerMOTD."

        REVISION     "200706070000Z"  -- June 7, 2007
        DESCRIPTION  "Added hpicfIpConfigLocalProxyArp object to the
                      the hpicfIpConfigEntry sequence."

        REVISION     "200705300954Z"  -- May 30, 2007
        DESCRIPTION  "Added the hpicfTelnet6Enable object."

        REVISION     "200511170000Z"  -- November 17, 2005
        DESCRIPTION  "Added hpicfBasicDNSConfig object group to
                      the HP ICF Basic Group.  Updated conformance and
                      compliances objects."

        REVISION     "200404120000Z"  -- April 12, 2004
        DESCRIPTION  "Added the hpicfIpZeroBroadcastEnable object."

        REVISION     "200301090108Z"  -- January 9, 2003
        DESCRIPTION  "Changed the default value for
                      hpicfSnmpTargetAddrLogFilter to 1."

        REVISION     "200210100401Z"  -- October 10, 2002
        DESCRIPTION  "Added hpicfSnmpTargetAddrLogFilter for to add
                      log filtering in snmpTargetAddrTable.  Added
                      conformance group hpicfSnmpTargetAddrLogFilterGroup.
                      Deprecated hpicfTrapDestTable.  Deprecated
                      hpicfBasicCompliance3 and replaced it
                      with hpicfBasicCompliance4."

        REVISION     "200011140401Z"  -- November 14, 2000
        DESCRIPTION  "Added proxy ARP and secondary IP address
                     configuration objects."

        REVISION     "200011030511Z"  -- November 3, 2000
        DESCRIPTION  "Deprecated per-entity announce object and
                     hpicfIfToEntity table and replaced with
                     hpicfAnnounceDiscoveryTable, indexed by
                     ifIndex.  Replaced per-interface default
                     gateway with global default gateway."

        REVISION     "9710210300Z"  -- October 21, 1997
        DESCRIPTION  "Added the hpicfWebAgentEnable object."

        REVISION     "9703060331Z"  -- March 6, 1997
        DESCRIPTION  "Fixed some typos in compliances.  Added
                     NOTIFICATION-GROUP information."

        REVISION     "9609100221Z"  -- September 10, 1996
        DESCRIPTION  "Split this MIB module from the former monolithic
                     hp-icf MIB.  Added the announce table.  Added
                     per-interface IP and IPX config.  Added trap
                     destination table and fixed trap table."

        REVISION     "9507130000Z"  -- July 13, 1995
        DESCRIPTION  "Added the hpicfTelnetEnable object."

        REVISION     "9501180000Z"  -- January 18, 1995
        DESCRIPTION  "Initial version of this MIB module.  Consisted of
                     the hpicfReset and hpicfSelfTest objects."

        ::= { hpicfObjectModules 5 }


    -- The HP ICF Basic Group

    hpicfBasic OBJECT IDENTIFIER ::= { hpicfCommon 4 }

    hpicfReset OBJECT-TYPE
        SYNTAX      INTEGER {
                        noReset(1),
                        normalReset(2),
                        -- (3) is no longer used
                        agentReset(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this object is set to 'normalReset' it
                    results in a 'powerup' reset of the device.  When
                    set to 'agentReset', it results in a reset of the
                    agent software, without resetting the device
                    hardware.  When this object is set, the agent
                    replies, dallies a short time to allow the reply
                    to be emitted from the device, then performs the
                    reset.  When read, this object always returns
                    'noReset'."
        ::= { hpicfBasic 1 }

    hpicfSelfTest OBJECT-TYPE
        SYNTAX      INTEGER {
                        stSuccess(1),
                        stExecute(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Self test is invoked by setting this flag to
                    'stExecute'. When the object changes to 'stSuccess',
                    the test has completed successfully."
        ::= { hpicfBasic 2 }

    hpicfTelnetEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', the
                    telnet server on this agent is running and allowed to
                    accept connections.  When the value of this object is
                    'disabled(2)', no incoming telnet connections will be
                    accepted by this agent.  Whether the telnet server
                    continues running when this object is set to
                    'disabled(2)' is implementation dependent."
        ::= { hpicfBasic 3 }

    hpicfConfigClear OBJECT-TYPE
        SYNTAX      INTEGER {
                        running(1),
                        configClear(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this object is set to 'configClear', the agent
                    replies, dallies a short time to allow the reply to
                    be emitted from the device, clears all of its
                    nonvolitile parameters back to their factory
                    defaults then resets the device.  Note that this
                    will result in all parameters being cleared,
                    including network configuration.  This function
                    should be used with extreme caution.

                    When read, this object always returns 'running'."
        ::= { hpicfBasic 4 }


    hpicfSelfTestResult OBJECT IDENTIFIER ::= { hpicfBasic 5 }

    hpicfSelfTestResultCode OBJECT-TYPE
        SYNTAX      INTEGER {
                        ok(1),
                        softFailure(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "If the value of this object is 'softFailure', the
                    agent is up and running, but has detected a
                    non-critical failure.  The value of the
                    hpicfSelfTestResultText will contain further
                    information about the type of failure that was
                    detected and may contain information about how to
                    remedy the situation."
        ::= { hpicfSelfTestResult 1 }

    hpicfSelfTestResultText OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "If the value of the hpicfSelfTestResultCode object
                    is 'softFailure', this text string contains detailed
                    information about the most recently detected failure,
                    including information about the type of failure that
                    was detected, and possibly information about how to
                    remedy the situation.  If the value of the
                    hpicfSelfTestResultCode object is 'ok', this object
                    will contain a zero-length octet string."
        ::= { hpicfSelfTestResult 2 }

    hpicfSelfTestResultTime OBJECT-TYPE
        SYNTAX      TimeStamp
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object contains the value of sysUpTime at the
                    time the agent detected the failure currently being
                    reported by hpicfSelfTestResultCode and
                    hpicfSelfTestResultText.  If the value of the
                    hpicfSelfTestResultCode is 'ok', or if the current
                    failure was detected before the SNMP agent
                    initialized, this object will have the value 0."
        ::= { hpicfSelfTestResult 3 }


    hpicfWebAgentEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', the
                    ehttpd server on this agent is running and allowed to
                    accept connections.  When the value of this object is
                    'disabled(2)', no incoming ehttpd connections will be
                    accepted by this agent.  Whether the ehttpd server
                    continues running when this object is set to
                    'disabled(2)' is implementation dependent."
        ::= { hpicfBasic 6 }


    hpicfBasicDiscovery OBJECT IDENTIFIER ::= { hpicfBasic 7 }

    hpicfAnnounceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfAnnounceEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A table of per-device network announcement
                    addresses.  This table is used to cause the
                    transmission of announcement packets for a
                    particular logical device to a specified address.
                    This is used as part of topology mapping to
                    determine the network connectivity of a device on
                    the network."
        ::= { hpicfBasicDiscovery 1 }

    hpicfAnnounceEntry OBJECT-TYPE
        SYNTAX      HpicfAnnounceEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A row in the table, containing the announcement
                    address for a single entity."
        INDEX       { entLogicalIndex }
        ::= { hpicfAnnounceTable 1 }

    HpicfAnnounceEntry ::=
        SEQUENCE {
            hpicfAnnounceAddress            MacAddress
        }

    hpicfAnnounceAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Seting an instance of this object to any MAC
                    address will trigger the agent to transmit three
                    announcement packets on an interface associated
                    with the logical entity.  These packets will use a
                    MAC source address set to the agent's MAC address
                    on that interface, a MAC destination address equal
                    to the value of the instance of this object,
                    a destination LSAP of 0xF8, and a destination HP
                    XSAP of 0x165d."
        ::= { hpicfAnnounceEntry 1 }

    hpicfIfToEntityTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIfToEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This table is used to map an interface index to a
                    logical entity index.  This table is mainly used
                    by autodiscovery to figure out which entLogicalIndex
                    corresponds to a particular network address.  This
                    table is not intended as a general purpose mapping.
                    In particular, in some systems the same interface
                    can be in use by multiple logical entities.  Also,
                    there is no requirement that ifIndex is unique
                    across all logical entities (such as the case where
                    multiple agents in the same chassis each assign
                    ifIndex without knowledge of how the other agents
                    are assigning ifIndex).  Therefore, these mappings
                    are only defined to hold for the special purpose
                    of getting from the discovered transport address for
                    a logical device to the entLogicalIndex needed for
                    announce address and search address.  Also, note
                    that this table will not contain entries for all
                    of the values of ifIndex.  It will only contain
                    entries for interfaces that can be used for sending
                    announcement packets for some logical entity."
        ::= { hpicfBasicDiscovery 2 }

    hpicfIfToEntityEntry OBJECT-TYPE
        SYNTAX      HpicfIfToEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A row in the table, containing the ifIndex to
                    entLogicalIndex mapping for a single interface."
        INDEX       { ifIndex }
        ::= { hpicfIfToEntityTable 1 }

    HpicfIfToEntityEntry ::=
        SEQUENCE {
            hpicfIfEntLogicalIndex          Integer32
        }

    hpicfIfEntLogicalIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object identifies the entLogicalIndex of a
                    device that can be mapped using this interface.  An
                    entLogicalEntry identified by a value of an instance
                    of this object is the same entry identified by the
                    same value of an instance of entLogicalIndex."
        ::= { hpicfIfToEntityEntry 1 }

    hpicfAnnounceDiscoveryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfAnnounceDiscoveryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table of per-device network announcement
                    addresses.  This table is used to cause the
                    transmission of announcement packets for a
                    particular logical device to a specified address.
                    This is used as part of topology mapping to
                    determine the network connectivity of a device on
                    the network."
        ::= { hpicfBasicDiscovery 3 }

    hpicfAnnounceDiscoveryEntry OBJECT-TYPE
        SYNTAX      HpicfAnnounceDiscoveryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A row in the table, containing the announcement
                    address for a single entity."
        INDEX       { ifIndex }
        ::= { hpicfAnnounceDiscoveryTable 1 }

    HpicfAnnounceDiscoveryEntry ::=
        SEQUENCE {
            hpicfAnnounceDiscoveryAddress      MacAddress
        }

    hpicfAnnounceDiscoveryAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Seting an instance of this object to any MAC
                    address will trigger the agent to transmit three
                    announcement packets on an interface associated
                    with the logical entity.  These packets will use a
                    MAC source address set to the agent's MAC address
                    on that interface, a MAC destination address equal
                    to the value of the instance of this object,
                    a destination LSAP of 0xF8, and a destination HP
                    XSAP of 0x165d."
        ::= { hpicfAnnounceDiscoveryEntry 1 }


    hpicfBasicIpConfig OBJECT IDENTIFIER ::= { hpicfBasic 8 }

    hpicfIpConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This table contains per-interface IP configuration
                    information."
        ::= { hpicfBasicIpConfig 1 }

    hpicfIpConfigEntry OBJECT-TYPE
        SYNTAX      HpicfIpConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    An entry in the hpicfIpConfigTable containing the IP
                    configuration information for a single interface."
        INDEX       { ifIndex }
        ::= { hpicfIpConfigTable 1 }

    HpicfIpConfigEntry ::=
        SEQUENCE {
            hpicfIpConfigAddress            IpAddress,
            hpicfIpConfigAddrMask           IpAddress,
            hpicfIpConfigDefaultRouter      IpAddress,
            hpicfIpConfigPingRouter         TruthValue,
            hpicfIpConfigMtu                Integer32,
            hpicfIpConfigAdminStatus        INTEGER,
            hpicfIpConfigProxyArp           INTEGER,
            hpicfIpConfigLocalProxyArp      INTEGER
        }

    hpicfIpConfigAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP address for this
                    interface."
        ::= { hpicfIpConfigEntry 1 }

    hpicfIpConfigAddrMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP subnet mask for
                    this interface."
        ::= { hpicfIpConfigEntry 2 }

    hpicfIpConfigDefaultRouter OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This variable contains the IP address of the
                    default router for this interface.  For SLIP
                    interfaces, this object contains the IP address
                    of the node at the other end of the serial
                    connection."
        ::= { hpicfIpConfigEntry 3 }

    hpicfIpConfigPingRouter OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object is used to configure whether this agent
                    will periodically send ICMP echo request packets to
                    the IP default router for this interface.  Since a
                    networking device typically does not transmit unless
                    it receives a management request, and since some
                    autodiscovery applications work by scanning ARP
                    caches, this ICMP echo can be used to try to stay in
                    our default router's ARP cache so that we can be
                    discovered.  This object allows the network manager
                    to enable or disable sending these ICMP echo
                    requests."
        ::= { hpicfIpConfigEntry 4 }

    hpicfIpConfigMtu OBJECT-TYPE
        SYNTAX      Integer32 (68..65535)
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    This object is used to configure the largest
                    datagram that IP will send on this interface.  Note
                    that for some interface types, this value may not
                    be changeable, and this object will be implemented
                    as read-only on those interfaces.  Also note that
                    most interfaces will not allow the full range of
                    values defined above, since the upper limit on the
                    MTU is constrained by the interface type."
        ::= { hpicfIpConfigEntry 5 }

    hpicfIpConfigAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        disable(1),
                        useConfigured(2),
                        learn(3)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Setting this flag to 'learn' (the default) will
                    clear any existing IP address configuration for
                    this interface, and will cause the device to use a
                    dynamic method (e.g. BootP) to obtain its IP
                    configuration for this interface.  This flag must be
                    set to 'useConfigured' in order to configure an IP
                    address for the interface.  Setting this flag to
                    'disable' will disable the IP protocol stack on this
                    interface."
        ::= { hpicfIpConfigEntry 6 }

    hpicfIpConfigProxyArp OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Enables/disables ARP proxy on the interface. If set
                    to enabled(1), the switch will respond on ARP request
                    for IP addresses from other subnets."
        ::= { hpicfIpConfigEntry 7 }

    hpicfIpConfigLocalProxyArp OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Enables/disables local ARP proxy on the interface. If set
                    to enabled(1), the switch will respond on ARP request
                    for IP addresses from local subnets."
        ::= { hpicfIpConfigEntry 8 }

    -- IP secondary addresses

    hpicfIpAddrTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    A table that contains the secondary addresses
                    configured for an interface."
        ::= { hpicfBasicIpConfig 2 }

    hpicfIpAddrEntry OBJECT-TYPE
        SYNTAX      HpicfIpAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    Information about a secondary IP address assigned
                    to an interface."
        INDEX       { ifIndex,
                      hpicfIpAddrAddr }
        ::= { hpicfIpAddrTable 1 }

    HpicfIpAddrEntry ::=
        SEQUENCE {
            hpicfIpAddrAddr               IpAddress,
            hpicfIpAddrMask               IpAddress,
            hpicfIpAddrStatus             RowStatus
        }

    hpicfIpAddrAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The secondary IP address."
        ::= { hpicfIpAddrEntry 1 }

    hpicfIpAddrMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The subnet mask for the address. If not specified
                    at the time of row creation, defaults to the
                    class-based netmask for the address."
        ::= { hpicfIpAddrEntry 2 }

    hpicfIpAddrStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********

                    The status of an IP Address entry."
        ::= { hpicfIpAddrEntry 3 }

    -- Global default gateway config objects

    hpicfIpGlobalDefaultRouter OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This variable contains the IP address of the
                    default router for this system.  The value of
                    this object is ignored when ipForwarding is
                    equal to 'forwarding'.  This object is only used
                    when hpicfIpGlobalDefaultRouterSource is 'manual'.
                    Note that a configured static route to address
                    0.0.0.0 takes precedence over the value of this
                    object."
        ::= { hpicfBasicIpConfig 3 }

    hpicfIpGlobalPingRouter OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object is used to configure whether this
                    device will periodically send ICMP echo request
                    packets to its IP default router.  Since a
                    networking device typically does not transmit
                    unless it receives a management request, and since
                    some autodiscovery applications work by scanning
                    ARP caches, this ICMP echo can be used to try to
                    stay in our default router's ARP cache so that we
                    can be discovered.  This object allows the network
                    manager to enable or disable sending these ICMP echo
                    requests.  The value of this object is ignored when
                    ipForwarding is equal to 'forwarding'."
        ::= { hpicfBasicIpConfig 4 }

    hpicfIpZeroBroadcastEnable OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object is used to configure whether switch
                     should silently discard on receipt any packet
                     addressed to 0.0.0.0 or {<Network>, 0}.If these
                     packets are not silently discarded, they must be
                     treated as IP broadcasts.This object is by default
                     configured to discard zero broadcast packet"
        ::= { hpicfBasicIpConfig 5 }


    hpicfBasicIpxConfig OBJECT IDENTIFIER ::= { hpicfBasic 9 }

    hpicfIpxConfigTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpxConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains IPX per-interface configuration
                    information that will take effect after the next
                    reset of the device."
        ::= { hpicfBasicIpxConfig 1 }

    hpicfIpxConfigEntry OBJECT-TYPE
        SYNTAX      HpicfIpxConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the hpicfIpxConfigTable containing the
                    IPX configuration information for a single
                    interface."
        INDEX       { ifIndex }
        ::= { hpicfIpxConfigTable 1 }

    HpicfIpxConfigEntry ::=
        SEQUENCE {
            hpicfIpxConfigNodeAddress       MacAddress,
            hpicfIpxConfigDefaultRouter     MacAddress,
            hpicfIpxConfigRouterEncaps      INTEGER,
            hpicfIpxConfigAdminStatus       INTEGER
        }

    hpicfIpxConfigNodeAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The IPX node address that the agent will use for
                    this interface.  Note that in many, but not all,
                    cases, this object duplicates the value of
                    ifPhysAddress."
        ::= { hpicfIpxConfigEntry 1 }

    hpicfIpxConfigDefaultRouter OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The IPX node address of the default router for
                    this interface."
        ::= { hpicfIpxConfigEntry 2 }

    hpicfIpxConfigRouterEncaps OBJECT-TYPE
        SYNTAX      INTEGER {
                        ethernetII(1),
                        ieee8022(2),
                        snap(3),
                        ieee8023Raw(4),
                        noGateway(5),
                        learn(6)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The type of encapsulation to for packets sent to
                    the default router on this interface.  Note that
                    some of the enumerations for this object may not
                    be appropriate for some interface types."
        ::= { hpicfIpxConfigEntry 3 }

    hpicfIpxConfigAdminStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enable(1),
                        disable(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this flag to 'enable' (the default) will
                    enable the IPX protocol stack on this interface.
                    Setting this flag to 'disable' will disable the IPX
                    protocol stack on this interface."
        ::= { hpicfIpxConfigEntry 4 }

    hpicfIpxNetTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfIpxNetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table contains the IPX network number in use
                    for each encapsulation type on the agent's
                    interfaces.  This information is learned dynamically
                    by the agent.  An entry will only exist in this table
                    for a particular encapsulation type on a particular
                    interface if we have discovered a network number for
                    that encapsulation type on that interface."
        ::= { hpicfBasicIpxConfig 2 }

    hpicfIpxNetEntry OBJECT-TYPE
        SYNTAX      HpicfIpxNetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing the IPX network
                    number for a single encapsulation type on one of the
                    agent's interfaces."
        INDEX       { ifIndex, hpicfIpxNetEncaps }
        ::= { hpicfIpxNetTable 1 }

    HpicfIpxNetEntry ::=
        SEQUENCE {
            hpicfIpxNetEncaps               INTEGER,
            hpicfIpxNetNumber               OCTET STRING
        }

    hpicfIpxNetEncaps OBJECT-TYPE
        SYNTAX      INTEGER {
                        ethernetII(1),
                        ieee8022(2),
                        snap(3),
                        ieee8023Raw(4)
                    }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The encapsulation type for this entry."
        ::= { hpicfIpxNetEntry 1 }

    hpicfIpxNetNumber OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(4))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The IPX network number for this encapsulation on
                    this interface, in network byte order."
        ::= { hpicfIpxNetEntry 2 }


    hpicfBasicTraps OBJECT IDENTIFIER ::= { hpicfBasic 10 }

    -- The HP ICF Fixed Trap Table

    hpicfFixedTrapTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfFixedTrapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table of mappings from notification ids to RMON
                    events.

                    This table contains one row for each notification
                    type supported by the agent.  It provides a way of
                    configuring an RMON eventTable entry to be triggered
                    whenever this notification occurs.  This way, each
                    notification can be configured to use a particular
                    community name (which selects a set of entries in
                    the trap destination table to send the notification
                    to), and provides a common point for configuring the
                    action to take when the notification condition
                    occurs."
        ::= { hpicfBasicTraps 1 }

    hpicfFixedTrapEntry OBJECT-TYPE
        SYNTAX      HpicfFixedTrapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, describing the mapping for
                    a single notification id."
        INDEX       { hpicfFixedTrapID }
        ::= { hpicfFixedTrapTable 1 }

    HpicfFixedTrapEntry ::=
        SEQUENCE {
            hpicfFixedTrapID                OBJECT IDENTIFIER,
            hpicfFixedTrapEventIndex        Integer32
        }

    hpicfFixedTrapID OBJECT-TYPE
        SYNTAX      OBJECT IDENTIFIER
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The object identifier of the notification this entry
                    provides mapping information for.

                    For notifications that are defined using the SNMPv2
                    NOTIFICATION-TYPE macro, the OID value assigned by
                    the macro is used directly as the hpicfFixedTrapID.
                    For traps defined using the SNMpv1 TRAP-TYPE macro,
                    the value of hpicfFixedTrapID is formed by adding
                    two sub IDs to the trap enterprise.  The first added
                    sub ID is 0, and the second is the specific trap
                    value assigned by the macro to the trap.  Note: this
                    is the method specified in RFC 1908, 'Coexistence
                    between Version 1 and Version 2 of the
                    Internet-standard Network Management Framework' for
                    converting the enterprise and specific-trap fields
                    of a received Trap-PDU into a value of snmpTrapOID
                    for use in building an SNMPv2-Trap-PDU in a proxy
                    agent."
        ::= { hpicfFixedTrapEntry 1 }

    hpicfFixedTrapEventIndex OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The index of the eventEntry in the RMON MIB that
                    will be triggered when a condition exists for which
                    this notification is supposed to be sent.  The
                    eventEntry identified by a particular value of this
                    index is the same as indentified by the same value
                    of the eventIndex object.  If there is no
                    corresponding entry in the eventTable, then no
                    association exists.  In particular, if this value is
                    zero, no associated event will be generated, as zero
                    is not a valid event index.

                    Note that some agents may implement this object
                    read-only.  In this case, it will indicate a
                    permanent entry in the eventTable for each
                    notification."
        ::= { hpicfFixedTrapEntry 2 }

    hpicfTrapDestTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfTrapDestEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     A table of trap destinations."
        ::= { hpicfBasicTraps 2 }

    hpicfTrapDestEntry OBJECT-TYPE
        SYNTAX      HpicfTrapDestEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing information about
                    a single trap destination."
        INDEX       { hpicfTrapDestIndex }
        ::= { hpicfTrapDestTable 1 }

    HpicfTrapDestEntry ::=
        SEQUENCE {
            hpicfTrapDestIndex              Integer32,
            hpicfTrapDestVersion            INTEGER,
            hpicfTrapDestCommunity          OCTET STRING,
            hpicfTrapDestTDomain            TDomain,
            hpicfTrapDestTAddress           TAddress,
            hpicfTrapDestFilter             Integer32,
            hpicfTrapDestStatus             RowStatus,
            hpicfTrapDestNotifyType         INTEGER,
            hpicfTrapDestRetries            Integer32,
            hpicfTrapDestTimeout            TimeInterval
        }

    hpicfTrapDestIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     A value that uniquely identifies this
                     hpicfTrapDestEntry."
        ::= { hpicfTrapDestEntry 1 }

    hpicfTrapDestVersion OBJECT-TYPE
        SYNTAX      INTEGER {
                        snmpv1(1),
                        snmpv2c(2)
                    }
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what version of
                    SNMP should be used to send the trap to this
                    destination.  When the value of this object is
                    'snmpv1', the trap will be sent to this destination
                    as a Trap-PDU using an SNMPv1 message wrapper, as
                    specified in RFC 1157.  When the value of this
                    object is 'snmpv2c', the trap will be sent to this
                    destination as a SNMPv2-Trap-PDU using the
                    Community-based SNMPv2 framework as specified in
                    RFC 1901.

                    An agent should reject an attempt to set an instance
                    of this object to a value representing a version of
                    the SNMP framework that is not supported by that
                    agent."
        DEFVAL      { snmpv1 }
        ::= { hpicfTrapDestEntry 2 }

    hpicfTrapDestCommunity OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    A community to which this destination address
                    belongs.

                    This entry is associated with any entry in the RMON
                    MIB's eventTable whose value of eventCommunity is
                    equal to the value of this object.  Every time an
                    associated event entry sends a trap due to an event,
                    that trap will be sent to each address in the
                    hpicfTrapDestTable with a hpicfTrapDestCommunity
                    equal to eventCommunity.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        DEFVAL      { '7075626C6963'h } -- public
        ::= { hpicfTrapDestEntry 3 }

    hpicfTrapDestTDomain OBJECT-TYPE
        SYNTAX      TDomain
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     The transport domain to use to send this trap.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        ::= { hpicfTrapDestEntry 4 }

    hpicfTrapDestTAddress OBJECT-TYPE
        SYNTAX      TAddress
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    The address to send traps to on behalf of this
                    entry, formatted according to the value of the
                    corresponding instance of the hpicfTrapDestTDomain
                    object.

                    This object may not be modified if the associated
                    hpicfTrapDestStatus object is equal to active(1)."
        ::= { hpicfTrapDestEntry 5 }

    hpicfTrapDestFilter OBJECT-TYPE
        SYNTAX      Integer32 (0..31)
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    The type of events that will be sent to this trap
                    receiver.  This filter is mainly used for limiting
                    'system event' traps that will be sent to a specific
                    receiver.

                    This filter is specified as a sum of values, where
                    each value specifies a classification of traps that
                    will be sent to this trap receiver.  The value for a
                    particular trap class C is computed as 2 raised to
                    a value representing C.  The trap classes are
                    defined as follows:

                    C (bit#)   Trap class
                    -----------------------------------------------
                    0          SNMP traps
                    1          informational events
                    2          warning events
                    3          critical events
                    4          debug events (HP internal use only)

                    For example, to specify that this trap receiver
                    should receive SNMP traps and critical event traps,
                    this object should be set to a value of 9 (2^0 +
                    2^3).

                    Note that some agents may not support
                    trap filtering.  Those agents may either implement
                    this object as read-only, or with a restricted
                    write syntax."
        DEFVAL      { 1 }   -- SNMP traps only
        ::= { hpicfTrapDestEntry 6 }

    hpicfTrapDestStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                     The status of this trap destination entry.

                    An entry may not exist in the active state unless
                    all of the objects in the entry are consistent.  In
                    particular, the value of hpicfTrapDestAddress must
                    have a legal length and value for the protocol
                    specified by hpicfTrapDestProtocol."
        ::= { hpicfTrapDestEntry 7 }

    hpicfTrapDestNotifyType OBJECT-TYPE
        SYNTAX      INTEGER {
                        trap(1),
                        inform(2)
                    }
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what type of
                    SNMP trap/informs should be used.
                    When the value of this object is 'trap',
                    notifications will be sent. When the value of this
                    object is 'inform', informs will be sent."

        DEFVAL      { trap }
        ::= { hpicfTrapDestEntry 8 }

    hpicfTrapDestRetries OBJECT-TYPE
        SYNTAX      Integer32 (0..255)
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what number of
                    retries to be attempted when a response is not
                    received for a generated message."

        DEFVAL      { 3 }
        ::= { hpicfTrapDestEntry 9 }

    hpicfTrapDestTimeout OBJECT-TYPE
        SYNTAX      TimeInterval
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "*************THIS OBJECT IS DEPRECATED **********
                    This object is used to indicate what number of
                    seconds between retries to be attempted when a
                    response is not received for a generated message."

        DEFVAL      { 1500 }
        ::= { hpicfTrapDestEntry 10 }


    -- HP Basic extensions to the Remote Monitoring MIB.

    hpicfBasicRmon  OBJECT IDENTIFIER ::= { hpicfBasic 11 }

    hpicfBasicAlarm OBJECT IDENTIFIER ::= { hpicfBasicRmon 3 }

    hpicfBasicAlarmNVCapacity OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The maximum number of alarmTable entries this
                    agent is capable of saving in nonvolatile storage."
        ::= { hpicfBasicAlarm 1 }

    hpicfBasicAlarmTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP ICF specific extension to the RMON alarm table."
        ::= { hpicfBasicAlarm 2 }

    hpicfBasicAlarmEntry OBJECT-TYPE
        SYNTAX      HpicfBasicAlarmEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Extensions for a single row in the RMON alarm
                    table."
        AUGMENTS    { alarmEntry }
        ::= { hpicfBasicAlarmTable 1 }

    HpicfBasicAlarmEntry ::=
        SEQUENCE {
            hpicfBasicAlarmStorageType      StorageType
        }

    hpicfBasicAlarmStorageType OBJECT-TYPE
        SYNTAX      StorageType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The storage type for this alarm entry."
        DEFVAL      { volatile }
        ::= { hpicfBasicAlarmEntry 1 }

    hpicfBasicEvent OBJECT IDENTIFIER ::= { hpicfBasicRmon 9 }

    hpicfBasicEventNVCapacity OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The maximum number of eventTable entries this
                    agent is capable of saving in nonvolatile storage."
        ::= { hpicfBasicEvent 1 }

    hpicfBasicEventTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicEventEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "HP ICF specific extension to the RMON event table."
        ::= { hpicfBasicEvent 2 }

    hpicfBasicEventEntry OBJECT-TYPE
        SYNTAX      HpicfBasicEventEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Extensions for a single row in the RMON event
                    table."
        AUGMENTS    { eventEntry }
        ::= { hpicfBasicEventTable 1 }

    HpicfBasicEventEntry ::=
        SEQUENCE {
            hpicfBasicEventStorageType      StorageType
        }

    hpicfBasicEventStorageType OBJECT-TYPE
        SYNTAX      StorageType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The storage type for this event entry.

                    Rows having the value 'permanent' allow write access
                    to the associated instances of eventCommunity and
                    eventType."
        DEFVAL      { volatile }
        ::= { hpicfBasicEventEntry 1 }

    -- HP ICF Basic Traps

    hpicfSelfTestTrap NOTIFICATION-TYPE
        OBJECTS     { hpicfSelfTestResultText }
        STATUS      current
        DESCRIPTION "An hpicfSelfTestTrap indicates that the agent has
                    detected a non-critical failure.  The value of the
                    hpicfSelfTestResultText object describing the failure
                    is sent in the trap.  Note that this trap is sent
                    whenever a new failure is detected.

                    An agent should throttle the generation of
                    consecutive hpicfSelfTestTraps so that there is at
                    least a five-second gap between traps of this type.
                    When traps are throttled, they are dropped, not
                    queued for sending at a future time.  (Note that
                    'generating' a trap means sending to all configured
                    recipients.)."
        ::= { hpicfCommonTrapsPrefix 4 }


    -- HP ICF BASIC snmpTargetAddrLog Filter

    hpicfBasicSnmpTargetAddrLogFilter OBJECT IDENTIFIER ::= { hpicfBasic 12 }

    hpicfSnmpTargetAddrLogFilterTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfSnmpTargetAddrLogFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to
                     snmpTargetAddrTable."
        ::= { hpicfBasicSnmpTargetAddrLogFilter 1 }

    hpicfSnmpTargetAddrLogFilterEntry OBJECT-TYPE
        SYNTAX      HpicfSnmpTargetAddrLogFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Adds an HpicfSnmpTargetAddrLogFilterEntry to snmpTargetAddrTable."
        AUGMENTS    { snmpTargetAddrEntry }
        ::= { hpicfSnmpTargetAddrLogFilterTable 1 }

    HpicfSnmpTargetAddrLogFilterEntry ::= SEQUENCE {
        hpicfSnmpTargetAddrLogFilter Integer32
    }

    hpicfSnmpTargetAddrLogFilter OBJECT-TYPE
        SYNTAX      Integer32 (0..31)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The type of events that will be sent to this trap
                    receiver.  This filter is mainly used for limiting
                    'system event' traps that will be sent to a specific
                    receiver.

                    This filter is specified as a sum of values, where
                    each value specifies a classification of traps that
                    will be sent to this trap receiver.  The value for a
                    particular trap class C is computed as 2 raised to
                    a value representing C.  The trap classes are
                    defined as follows:

                    C (bit#)   Trap class
                    -----------------------------------------------
                    0          SNMP traps
                    1          informational events
                    2          warning events
                    3          critical events
                    4          debug events (HP internal use only)

                    For example, to specify that this trap receiver
                    should receive SNMP traps and critical event traps,
                    this object should be set to a value of 9 (2^0 +
                    2^3).

                    Note that some agents may not support
                    trap filtering.  Those agents may either implement
                    this object as read-only, or with a restricted
                    write syntax."
        DEFVAL      { 1 }   -- SNMP traps only
        ::= { hpicfSnmpTargetAddrLogFilterEntry 1 }


    -- HP ICF BASIC Banner

    hpicfBannerStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                     }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', it means
                    that the banner has been configured and will be displayed
                    at console or web-ui login. When the value of this object
                    is disabled(2), it means the banner has been unconfigured."
        DEFVAL      { 1 }
        ::= { hpicfBasic 13 }


    hpicfBanner     OBJECT IDENTIFIER ::= { hpicfBasic 14 }

    hpicfBannerMOTD OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(1..1300))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "An administratively configured message that is displayed
                     to the user when logged in to the device through
                     either the console or web-ui"
        ::= { hpicfBanner 1 }

    hpicfExecBannerStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', it means
                     that the exec banner is configured. If authentication
                     is enabled on the switch, exec banner is displayed after
                     authentication in user interface sessions(console,telnet,
                     SSH and webUI).
                     When there is no authentication in the switch,exec banner
                     is displayed before the switch prompt. When the value of
                     this object is 'disabled (2)', it means that banner has
                     not been configured. If the value of this object is
                     'enabled (1)', banner cannot be an emptry string."
       DEFVAL       { disabled }
       ::= { hpicfBanner 2 }

    hpicfBannerExec OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(1..65535))
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "An administratively configured exec banner message that
                     is displayed in console, telnet, SSH and webUI sessions.
                     Currently, the banner text can be configured upto
                     1300 characters."
        ::= { hpicfBanner 3 }

    hpicfLastLoginBannerStatus OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)', it means
                     that the last-login banner is enabled. If authentication
                     is enabled on the switch, the last-login banner is
                     displayed after authentication in user interface sessions
                     (console, Telnet, SSH, and web). When there is no
                     authentication in the switch, the last-login banner
                     is displayed before the switch prompt."
        DEFVAL      { enabled }
        ::= { hpicfBanner 4 }

    hpicfBannerExec1 OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE(0..65535))
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "An administratively configured exec banner message that
                     is displayed in console, telnet, SSH and webUI sessions.
                     Currently, the banner text can be configured upto
                     1300 characters. This can be of length 0 when its not
                     configured."
        ::= { hpicfBanner 5 }


    -- HP ICF BASIC Domain Name Services Objects

    hpicfBasicDNSConfig OBJECT IDENTIFIER ::= { hpicfBasic 15 }

    hpicfDNSDefaultDomainSuffix OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "The default domain name. This has been deprecated as
                     multiple domain suffixes are supported with
                     hpicfDNSDomainSuffixTable. Read or Write on this object
                     maps to the first domain suffix entry in
                     hpicfDNSDomainSuffixTable."
        ::= { hpicfBasicDNSConfig 1 }

    hpicfDNSNameServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "#### Deprecated #### A table that contains information
                    about the (DNS) Name Server configuration in this
                    device."
        ::= { hpicfBasicDNSConfig 2 }


    hpicfDNSNameServerEntry OBJECT-TYPE
        SYNTAX      HpicfDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "### deprecated ###Information about name server
                    configuration entry on this resolver device."
        INDEX       { hpicfDNSNameServerAddress }
        ::= { hpicfDNSNameServerTable 1 }

    HpicfDNSNameServerEntry ::=
        SEQUENCE {
            hpicfDNSNameServerAddress     IpAddress,
            hpicfDNSNameServerEntryStatus RowStatus
        }

    hpicfDNSNameServerAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      deprecated
        DESCRIPTION "### Deprecated ###IPv4 address of the given name server."
        ::= { hpicfDNSNameServerEntry 1 }

    hpicfDNSNameServerEntryStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      deprecated
        DESCRIPTION "### Deprecated ###The row status of a given name server
                    entry."
        ::= { hpicfDNSNameServerEntry 2 }

    hpicfInetDNSNameServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfInetDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains information about the
                    (DNS) Name Server configuration in this
                    device.This table has 3 index's PRIORITY ADDRTYPE
                    ADDR,for each pririoty only one address can be
                    configured. An address can be created in this
                    table only if the 'hpicfDNSConfigMode' is manual(2)."
        ::= { hpicfBasicDNSConfig 3 }

    hpicfInetDNSNameServerEntry OBJECT-TYPE
        SYNTAX      HpicfInetDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in hpicfInetDNSNameServerEntry contains single
                     manually configured DNS Address on this resolver device.
                     This can be created only if the 'hpicfDNSConfigMode' is
                     manual(2). "
        INDEX       { hpicfInetDNSNameServerAddrIndex,
                      hpicfInetDNSNameServerAddrType,
                      hpicfInetDNSNameServerAddress }
        ::= { hpicfInetDNSNameServerTable 1 }

    HpicfInetDNSNameServerEntry ::=
        SEQUENCE {
            hpicfInetDNSNameServerAddrIndex   Integer32,
            hpicfInetDNSNameServerAddrType    InetAddressType,
            hpicfInetDNSNameServerAddress     InetAddress,
            hpicfInetDNSNameServerEntryStatus RowStatus,
            hpicfInetDNSNameServerEntryIsOobm TruthValue
        }

    hpicfInetDNSNameServerAddrIndex OBJECT-TYPE
        SYNTAX      Integer32(0..255)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Index(which is also treated as priority) of DNS
                     server address configured."
        ::= { hpicfInetDNSNameServerEntry 1 }

    hpicfInetDNSNameServerAddrType OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Address Type of the DNS Name server stored in
                     hpicfInetDNSNameServer Address."
        ::= { hpicfInetDNSNameServerEntry 2 }

    hpicfInetDNSNameServerAddress OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Address of DNS and type of address stored is
                     is mentioned in hpicfInetDNSNameServerAddType
                     This field needs to be used in conjunction with
                     hpicfInetDNSNameServerAddrType."
        ::= { hpicfInetDNSNameServerEntry 3 }

    hpicfInetDNSNameServerEntryStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The row status of a given name server entry."
        ::= { hpicfInetDNSNameServerEntry 4 }

    hpicfInetDNSNameServerEntryIsOobm OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This object indicates whether this DNS Server
                     is reachable over the OOBM (Out Of Band Management)
                     interface or not. This MIB object will be applicable
                     only if there is a physical OOBM port on the device."
        DEFVAL      { false }
        ::= {  hpicfInetDNSNameServerEntry 5 }

    hpicfDNSDefaultDomainSuffixIsOobm OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The default domain name (A unique designator on the
                     network composed of symbols separated by dots) to
                     which resolver appends host names before sending the
                     queries to name servers on OOBM plane.  An example of
                     a valid default domain suffix is 'hp.com'.  The resolver
                     will not use a default domain suffix if this object
                     is set to empty-string (which is the default value).
                     This can be set only if the 'hpicfDNSConfigMode'
                     is set to manual(2)."
        ::= { hpicfBasicDNSConfig 4 }

    hpicfDNSConfigMode OBJECT-TYPE
        SYNTAX      INTEGER {
                        dhcp(1),
                        manual(2),
                        disabled(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this flag to 'dhcp' will cause the device
                     to use DHCP to obtain its DNS configuration parameters
                     (such as dns servers and domain name suffix).

                     Setting this flag to 'manual' will allow manual DNS
                     configuration.

                     Setting this flag to 'disabled' will clear any existing DNS
                     configuration."
        ::= { hpicfBasicDNSConfig 5 }

    hpicfCurDNSConfig OBJECT IDENTIFIER ::= { hpicfBasicDNSConfig 6 }

    hpicfCurDNSDefaultDomainSuffix OBJECT-TYPE
        SYNTAX      DisplayString (SIZE (0..255))
        MAX-ACCESS  read-only
        STATUS      deprecated
        DESCRIPTION "Currently configured default domain name. This has been
                     deprecated as multiple domain names are now supported
                     using hpicfDNSDomainSuffixTable. A read on this object
                     returns the first domain suffix entry from
                     hpicfDNSDomainSuffixTable."
        ::= { hpicfCurDNSConfig 1 }

    hpicfCurDNSNameServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfCurDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains information about the
                    (DNS) Name Server configuration in this
                    device.This table has hpicfCurDNSNameServerAddrIndex -
                    priority of the DNS address, hpicfCurDNSNameServerAddrType -
                    type of the address and finally hpicfCurDNSNameServerAddress -
                    the DNS server address. For each pririoty only one address
                    can be configured."
        ::= { hpicfCurDNSConfig 2 }

    hpicfCurDNSNameServerEntry OBJECT-TYPE
        SYNTAX      HpicfCurDNSNameServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in hpicfCurDNSNameServerEntry contains single
                     DHCP learnt DNS Address on this resolver device. "
        INDEX       { hpicfCurDNSNameServerAddrIndex,
                      hpicfCurDNSNameServerAddrType,
                      hpicfCurDNSNameServerAddress }
        ::= { hpicfCurDNSNameServerTable 1 }

    HpicfCurDNSNameServerEntry ::=
        SEQUENCE {
            hpicfCurDNSNameServerAddrIndex   Integer32,
            hpicfCurDNSNameServerAddrType    InetAddressType,
            hpicfCurDNSNameServerAddress     InetAddress,
            hpicfCurDNSNameServerEntryStatus RowStatus
        }

    hpicfCurDNSNameServerAddrIndex OBJECT-TYPE
        SYNTAX     Integer32(0..255)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Index(which is also treated as priority) of DNS server address
                     configured."
        ::=    { hpicfCurDNSNameServerEntry 1 }

    hpicfCurDNSNameServerAddrType OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Address Type of the DNS Name server stored in
                    hpicfCurDNSNameServer Address."
        ::= { hpicfCurDNSNameServerEntry 2 }

    hpicfCurDNSNameServerAddress OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Address of DNS and type of address stored is
                     is mentioned in hpicfCurDNSNameServerAddType
                     This field needs to be used in conjuction with
                     hpicfCurDNSNameServerAddrType."
        ::= { hpicfCurDNSNameServerEntry 3 }

    hpicfCurDNSNameServerEntryStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The row status of a given name server entry."
        ::= { hpicfCurDNSNameServerEntry 4 }

    hpicfDNSDomainSuffixTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfDNSDomainSuffixEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of DNS Domain Suffixes. A DNS Domain Suffix
                    (A unique designator on the network composed of symbols
                    separated by dots) to which resolver appends host names
                    before sending the queries to name servers. An example of
                    a valid domain suffix is 'example.com'. This table
                    contains either the manually configured domain suffixes
                    or the DHCP provided domain suffixes, depending on the
                    whether 'hpicfDNSConfigMode' is set to manual or dhcp
                    respectively."
        ::= { hpicfBasicDNSConfig  7 }

    hpicfDNSDomainSuffixEntry OBJECT-TYPE
        SYNTAX      HpicfDNSDomainSuffixEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A row in the DNS Domain Suffix table."
        INDEX       { hpicfDNSDomainSuffixIndex }
        ::= { hpicfDNSDomainSuffixTable 1 }

    HpicfDNSDomainSuffixEntry ::=
        SEQUENCE {
            hpicfDNSDomainSuffixIndex       Integer32,
            hpicfDNSDomainSuffix            DisplayString
        }

    hpicfDNSDomainSuffixIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..15)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Index of the domain suffix entry in the configuration
                    table. This index represents the priority of the domain
                    suffix, as the resolver uses the suffixes in the same
                    order as per the index."
        ::= { hpicfDNSDomainSuffixEntry 1 }

    hpicfDNSDomainSuffix OBJECT-TYPE
        SYNTAX      DisplayString  (SIZE (0 .. 255))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "String representing the DNS Domain Suffix. A DNS Domain
                    Suffix (A unique designator on the network composed of
                    symbols separated by dots) to which resolver appends host
                    names before sending the queries to name servers.
                    An example of a valid domain suffix is 'example.com'.
                    The resolver will not use a domain suffix that is set as
                    empty-string (which is the default value). This can be
                    set only if the 'hpicfDNSConfigMode'is manual(2).
                    A read on this object always returns the current
                    configuration details. If 'hpicfDNSConfigMode'is set to
                    dhcp, it contains the domain names obtained through DHCP.
                    If 'hpicfDNSConfigMode'is set to manual it contains the
                    manually configured domain names."
        ::= { hpicfDNSDomainSuffixEntry 2 }


    hpicfResetDefault OBJECT-TYPE
        SYNTAX      INTEGER {
                        primary(1),
                        secondary(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The switch boots from 'primary image' or 'secondary image'
                    based on this object."
        ::= { hpicfBasic 16 }


    hpicfTelnet6Enable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      deprecated
        DESCRIPTION "********* THIS OBJECT IS DEPRECATED *********
                    When the value of this object is 'enabled(1)', the
                    telnet6 server on this agent is running and allowed to
                    accept connections.  When the value of this object is
                    'disabled(2)', no incoming telnet6 connections will be
                    accepted by this agent."
        ::= { hpicfBasic 17 }


    hpicfBasicSNMPConfig OBJECT IDENTIFIER ::= { hpicfBasic 18 }

    hpSwitchSnmpViewConfig OBJECT-TYPE
        SYNTAX      INTEGER {
                         enabled(1),
                         disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Enable/Disable SNMP support for hpSwitchAuthentication
                     MIB. When the MIB access is enabled, Manager read/write
                     access to the MIB is permitted. Operator read/write
                     access to the MIB is always denied. For security
                     reasons, network administrators are encouraged to
                     disable SNMPV2c before using the MIB."
        DEFVAL      { disabled }
        ::= { hpicfBasicSNMPConfig 1 }

    hpicfSnmpV2Enable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is 'enabled(1)',
                     it means that SNMPv1/v2 is enabled on the system.
                     When the value of this object is 'disabled(2)',
                     it means that SNMPv1/v2 is disabled on the system."
        ::= { hpicfBasicSNMPConfig 2 }

    hpicfSwitchSnmpAllowUnsecuredAccessToMACsec OBJECT-TYPE
         SYNTAX      INTEGER {
                         enabled(1),
                         disabled(2)
                     }
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION "Enable unsecured access through SNMP for
                      the hpicfMACsec MIB.

                      When this object is disabled, access to
                      the hpicfMACsec MIB is permitted only when SNMPv3
                      is used with authentication and privacy.

                      When this object is enabled, access to
                      the MIB is not restricted for SNMPv3 with privacy and
                      access through SNMPv1, SNMPv2, and SNMPv3 is allowed.

                      Access to this MIB object would further be controlled by
                      the switch-wide settings for SNMP."

         DEFVAL      { disabled }
         ::= { hpicfBasicSNMPConfig 3 }

     hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy OBJECT-TYPE
         SYNTAX      INTEGER {
                         enabled(1),
                         disabled(2)
                     }
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION "Enable unsecured access through SNMP for
                      the ieee8021SecY MIB.

                      When this object is disabled, access to
                      the ieee8021SecY MIB is permitted only when SNMPv3
                      is used with authentication and privacy.

                      When this object is enabled, access to
                      the MIB is not restricted for SNMPv3 with privacy and
                      access through SNMPv1, SNMPv2, and SNMPv3 is allowed.

                      Access to this MIB object would further be controlled by
                      the switch-wide settings for SNMP."

         DEFVAL     { disabled }
         ::= { hpicfBasicSNMPConfig 4 }

    hpicfSwitchSnmpEnabledTrapEventList OBJECT-TYPE
       SYNTAX      OCTET STRING (SIZE (876))
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION "This object is used to configure the event-list that
                    needs to be send as trap together with RMON logging.

                    By default, all the events will be send as a SNMP trap
                    together with RMON logging.
                    But once this object is configured, trap will be send for
                    only the specfied events and RMON logging will be
                    continued for all events.

                    Maximum 100 events can be specified with this object."
       ::= { hpicfBasicSNMPConfig 5 }

    hpicfBasicConfig OBJECT IDENTIFIER ::= { hpicfBasic 19 }

    hpicfDisplayLogNumbers OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this object is set to True, Log event numbers
                     will be displayed when log is displayed via the CLI
                     or via the MENU. Log event numbers will not be
                     displayed when this object is set to False."
        DEFVAL      { true }
        ::= { hpicfBasicConfig 1 }

     hpicfIncludeCredentials OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2),
                        radiusTacacsOnly(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object:
                     enabled - Include password and credentials in the
                              switch configuration.
                     disabled - Do not include credentials in the switch
                               configuration.
                     radiusTacasOnly - Enable only the RADIUS and TACACS+
                               server keys in the switch configuration.

                   NOTE: This will insert possibly sensitive information
                   in switch configuration files, and as a part of some
                   CLI commands output.  It is strongly recommended that you
                   use SFTP rather than TFTP for transfer of the configuration
                   over the network, and that you use the web configuration
                   interface only with SSL enabled."
        ::= { hpicfBasicConfig 2 }

     hpicfIncludeCredClearPassKey OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object:
                     enabled - Include ClearPass key along with other
                              sensitive keys in the show configuration.
                     disabled - Do not include ClearPass key in the switch
                               configuration.

                   NOTE: This will include ClearPass key in the show configuration
                   along with other sensitive keys that are included when
                   hpicfIncludeCredentials is enabled. The hpicfIncludeCredentials
                   should be enabled before this object can be enabled."
        ::= { hpicfBasicConfig 3 }

    -- hpicfReloadMIB OBJECT IDENTIFIER ::= { hpicfBasic 20 } (see hpicfReload.mib)


    hpicfBasicLogFilters OBJECT IDENTIFIER ::= { hpicfBasic 23 }

    hpicfBasicLogFiltersTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicLogFiltersEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of log filters.
                    A log filter can be constructed from multiple
                    sub-filters, each specifying matching criteria and
                    the action for the match. Multiple filters can be
                    created, current maximum limit is 10. Only one
                    filter can be enabled at a time.
                    Each entry in this table must have associated
                    entries in 'hpicfBasicLogSubFiltersTable'."
         ::= { hpicfBasicLogFilters 1 }

    hpicfBasicLogFiltersEntry OBJECT-TYPE
        SYNTAX      HpicfBasicLogFiltersEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry containing information about log filter."
        INDEX { hpicfBasicLogFilterName }
        ::= { hpicfBasicLogFiltersTable 1 }

    HpicfBasicLogFiltersEntry ::=
        SEQUENCE {
            hpicfBasicLogFilterName          SnmpAdminString,
            hpicfBasicLogFilterEnable        INTEGER,
            hpicfBasicLogFilterDropCounter   Counter32,
            hpicfBasicLogFilterRowStatus     RowStatus
        }

    hpicfBasicLogFilterName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..64))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Name of the log filter.
                    A case sensitive string of printable ASCII characters
                    that uniquely identifies this log filter.
                    The current maximum limit is 16 characters."
        ::= { hpicfBasicLogFiltersEntry 1 }

    hpicfBasicLogFilterEnable OBJECT-TYPE
        SYNTAX      INTEGER {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Enables/disables log filter.
                    When the value of this object is 'enabled(1)'
                    every event message will be passed to this filter
                    for examination, and either accepted or rejected.
                    Only one filter can be enabled at a time. Filter
                    modules can be dynamically replaced, newly enabled
                    filter automatically disables the previous one."
        DEFVAL      { disabled }
        ::= { hpicfBasicLogFiltersEntry 2 }

    hpicfBasicLogFilterDropCounter OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Number of event messages that were denied to log due
                    to filtering criteria set in this filter and silently
                    dropped. Represents filtering effect of the filter on
                    event logging process."
        ::= { hpicfBasicLogFiltersEntry 3 }

    hpicfBasicLogFilterRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Status of the row in hpicfBasicLogFiltersTable.
                    Once row in this table is created its status will
                    be 'active' and cannot be changed. The row will be
                    deleted if row status is set to 'destroy'."
        ::= { hpicfBasicLogFiltersEntry 4 }

    hpicfBasicLogSubFiltersTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicLogSubFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Sub-filters in the log filter module.
                    A sub-filter can be one of the following types:
                    - severity
                    - event number
                    - regular expression
                    Each sub-filter entry consists of:
                     - sequence number
                     - matching criteria (severity or event number or
                                          regular expression)
                     - action for the match.
                    A default sub-filter with a sequence number of 99 is always
                    created in the sub-filters table and has '.*' as the matching
                    criteria. Matching criteria and action can be modified for
                    all sub-filters except for the default sub-filter which
                    only supports modification of action. To change the sequence
                    number of sub-filter it should be deleted and recreated
                    with a new sequence number.
                    Multiple sub-filters can be added to the filter
                    module, current limit is 20. Sub-filters in the
                    filter module can be same or different types.
                    Entries in this table are associated with parent
                    entries in 'hpicfBasicLogFiltersTable'.
                    When parent entry in the 'hpicfBasicLogFiltersTable'
                    is created or deleted the corresponding entries in
                    this table will be also created or deleted."
        ::= { hpicfBasicLogFilters 2 }

    hpicfBasicLogSubFilterEntry OBJECT-TYPE
        SYNTAX      HpicfBasicLogSubFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry containing information about sub-filter."
        INDEX { hpicfBasicLogFilterName,
                hpicfBasicLogSubFilterSeqNum }
        ::= { hpicfBasicLogSubFiltersTable 1 }

    HpicfBasicLogSubFilterEntry ::=
        SEQUENCE {
            hpicfBasicLogSubFilterSeqNum         Integer32,
            hpicfBasicLogSubFilterType           INTEGER,
            hpicfBasicLogSubFilterSeverity       INTEGER,
            hpicfBasicLogSubFilterEventNum       Integer32,
            hpicfBasicLogSubFilterRegExp         SnmpAdminString,
            hpicfBasicLogSubFilterAction         INTEGER,
            hpicfBasicLogSubFilterMatchCounter   Counter32,
            hpicfBasicLogSubFilterRowStatus      RowStatus
        }

    hpicfBasicLogSubFilterSeqNum OBJECT-TYPE
        SYNTAX      Integer32 (1..99)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Sequence number for the sub-filter in the filter
                    module. Sub-filters in the filter module are executed
                    in the order, starting from lowest sequence number to
                    the highest. As soon as match is found the action is
                    executed and no further matching is done."
        ::= { hpicfBasicLogSubFilterEntry 1 }

    hpicfBasicLogSubFilterType OBJECT-TYPE
        SYNTAX      INTEGER {
                        severity(1),
                        eventNum(2),
                        regExp(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Sub-filter type.
                    If type is 'severity' then the value of
                    'hpicfBasicLogSubFilterSeverity' object is used
                    as matching criteria.
                    If type is 'eventNum' then the value of
                    'hpicfBasicLogSubFilterEventNum' object is used
                    as matching criteria.
                    If type is 'regExp' then the value of
                    'hpicfBasicLogSubFilterRegExp' object is used
                    as matching criteria."
        ::= { hpicfBasicLogSubFilterEntry 2 }

    hpicfBasicLogSubFilterSeverity OBJECT-TYPE
        SYNTAX      INTEGER {
                        fatal(1),
                        warn(2),
                        info(3),
                        debug(4),
                        standard(5)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Severity level sub-filter type.
                     Contains severity levels as matching criteria."
        ::= { hpicfBasicLogSubFilterEntry 3 }

    hpicfBasicLogSubFilterEventNum OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Event number sub-filter type.
                     Contains event number as matching criteria.
                     The value used in this object represents
                     an 'eventIndex' as defined in RMON-MIB."
        ::= { hpicfBasicLogSubFilterEntry 4 }

    hpicfBasicLogSubFilterRegExp OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE (0..255))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Regular Expression sub-filter type.
                     String containing a regular expression
                     as matching criteria."
        ::= { hpicfBasicLogSubFilterEntry 5 }

    hpicfBasicLogSubFilterAction OBJECT-TYPE
        SYNTAX      INTEGER {
                        deny(1),
                        permit(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Action type defined for sub-filter."
        ::= { hpicfBasicLogSubFilterEntry 6 }

    hpicfBasicLogSubFilterMatchCounter OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Number of event messages that matched to criteria
                    set in this sub-filter, and were denied or permitted
                    to log. Represents summary effect contributed
                    by this sub-filter."
        ::= { hpicfBasicLogSubFilterEntry 7 }

    hpicfBasicLogSubFilterRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Status of the row in hpicfBasicLogSubFiltersTable.
                    Following objects are mandatory for the row to exist
                     - hpicfBasicLogSubFilterSeqNum
                     - hpicfBasicLogSubFilterType
                     - hpicfBasicLogSubFilterSeverity
                       or
                       hpicfBasicLogSubFilterEventNum
                       or
                       hpicfBasicLogSubFilterRegExp
                     - hpicfBasicLogSubFilterAction

                    Each row in this table is associated with the row in
                    'hpicfBasicLogFiltersTable' and can be created or
                    deleted only when corresponding row in the
                    'hpicfBasicLogFiltersTable' is created or deleted.
                    Once row in this table is created its status will
                    be 'active' and cannot be changed."
        ::= { hpicfBasicLogSubFilterEntry 8 }

    hpicfBasicLogFiltersClearCounters OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..64))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When the value of this object is set, the counters
                    associated with the specified filter name will be cleared.
                    If the specified filter name is 'all', the counters
                    associated with all filters will have their counters cleared.
                    A get request for this object always returns an empty string."
        ::= { hpicfBasicLogFilters 3 }

--*********************************************************************************
--Per IP filter table
--*********************************************************************************

    hpicfBasicLogPerIpFiltersTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfBasicLogPerIpFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Per-filters in the log filter module.
                    A sub-filter can be one of the following types:
                    - severity
                    - event number
                    - regular expression
                     - action for the match.
                    Entries in this table are associated with parent
                    entries in 'hpicfBasicLogFiltersTable'.
                    When parent entry in the 'hpicfBasicLogFiltersTable'
                    is created or deleted the corresponding entries in
                    this table will be also created or deleted."
        ::= { hpicfBasicLogFilters 4 }

    hpicfBasicLogPerIpFilterEntry OBJECT-TYPE
        SYNTAX      HpicfBasicLogPerIpFilterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry containing information about per IP filter."
        INDEX { hpicfBasicLogFilterName,
                hpicfBasicLogPerIpIndex }
        ::= { hpicfBasicLogPerIpFiltersTable 1 }

    HpicfBasicLogPerIpFilterEntry ::=
        SEQUENCE {
            hpicfBasicLogPerIpIndex                Unsigned32,
            hpicfBasicLogPerIpFilterType           INTEGER,
            hpicfBasicLogPerIpFilterSeverity       INTEGER,
            hpicfBasicLogPerIpFilterEventList      OCTET STRING,
            hpicfBasicLogPerIpFilterAction         INTEGER,
            hpicfBasicLogPerIpFilterSysModule      OCTET STRING,
            hpicfBasicLogPerIpFilterRowStatus      RowStatus
        }

    hpicfBasicLogPerIpIndex OBJECT-TYPE
        SYNTAX           Unsigned32 (1..2147483647)
        MAX-ACCESS       not-accessible
        STATUS           current
        DESCRIPTION      "The index value which uniquely identifies a row
                          in the Per IP filter table."
        ::= { hpicfBasicLogPerIpFilterEntry 1 }

     hpicfBasicLogPerIpFilterType OBJECT-TYPE
        SYNTAX      INTEGER {
                        severity(1),
                        eventNum(2),
                        sysMod(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Per IP filter type."
        ::= { hpicfBasicLogPerIpFilterEntry 2 }

    hpicfBasicLogPerIpFilterSeverity OBJECT-TYPE
        SYNTAX      INTEGER {
                        fatal(1),
                        warn(2),
                        info(3),
                        debug(4),
                        standard(5)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Severity level of Per IP filter.
                     Contains severity levels as matching criteria."
        ::= { hpicfBasicLogPerIpFilterEntry 3 }

    hpicfBasicLogPerIpFilterEventList OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (876))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Event List of Per Ip filter.
                     Each octet within this value specifies a set of eight
                     Events, with the first octet specifying Events 1 through 8,
                     the second octet specifying Events 9 through 16 etc.
                     Within each octet, the most significant bit represents 
                     the lowest numbered Event, and the least significant bit
                     represents the highest Event. Thus, each Event is represented 
                     by a single bit within the value of this object. If that bit 
                     has a value of 1 then that Event is included in the set of
                     Events; the Event is not included if its bit has a value of 0."
        ::= { hpicfBasicLogPerIpFilterEntry 4 }

    hpicfBasicLogPerIpFilterAction OBJECT-TYPE
        SYNTAX      INTEGER {
                        deny(1),
                        permit(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Action type defined for Event list."
        ::= { hpicfBasicLogPerIpFilterEntry 5 }

    hpicfBasicLogPerIpFilterSysModule OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (32))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "A system module value used for the filter entry.
                     Each octet within this value specifies a set of eight
                     System Modules, with the first octet specifying System module 1              
                     through 8, the second octet specifying System Module 9 through 
                     16 etc. Within each octet, the most significant bit represents 
                     the lowest numbered System Module, and the least significant bit
                     represents the highest System Module. Thus, each System Module
                     is represented by a single bit within the value of this object. 
                     If that bit has a value of 1 then that System Module is included 
                     in the set of System Modules; the System Module is not included 
                     if its bit has a value of 0."
        ::=  { hpicfBasicLogPerIpFilterEntry 6 }

     hpicfBasicLogPerIpFilterRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Status of the row in hpicfBasicLogPerIpFiltersTable.
                    Each row in this table is associated with the row in
                    'hpicfBasicLogFiltersTable' and can be created or
                    deleted only when corresponding row in the
                    'hpicfBasicLogFiltersTable' is created or deleted.
                    Once row in this table is created its status will
                    be 'active' and cannot be changed."
        ::= { hpicfBasicLogPerIpFilterEntry 7 }
--*********************************************************************************
--Per IP URL table
--*********************************************************************************

    hpicfperIploggingurlTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF HpicfperIploggingurlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table defines a set of urls."
        ::= { hpicfBasicLogFilters 5 }

    hpicfperIploggingurlEntry OBJECT-TYPE
        SYNTAX      HpicfperIploggingurlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table which provides information about 
                    a logging url."
        INDEX       { hpicfperIploggingurlIndex }
        ::= { hpicfperIploggingurlTable 1 }

    HpicfperIploggingurlEntry ::=
        SEQUENCE {
           hpicfperIploggingurlIndex        Unsigned32,
           hpicfperIploggingurlUrl          OCTET STRING,
           hpicfperIploggingurlFilterName   SnmpAdminString,
           hpicfperIploggingurlRowStatus    RowStatus
                 }

    hpicfperIploggingurlIndex OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A unique number to identify URL."
        ::= { hpicfperIploggingurlEntry 1 }

    hpicfperIploggingurlUrl OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (0..1024))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Logging URL to the server."
        ::= { hpicfperIploggingurlEntry 2 }
		
    hpicfperIploggingurlFilterName OBJECT-TYPE
        SYNTAX      SnmpAdminString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION 
             "The filter Name connected to the Syslog server."
        ::= { hpicfperIploggingurlEntry 3 }

    hpicfperIploggingurlRowStatus OBJECT-TYPE
        SYNTAX       RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION  "Status of the row in hpicfperIploggingurlTable."
         ::= { hpicfperIploggingurlEntry 4 }


    hpicfBasicWebMgmtObjects OBJECT IDENTIFIER ::= { hpicfBasic 24 }

    hpicfBasicWebAgentIdleTime OBJECT-TYPE
        SYNTAX      Integer32 (0..15000)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object specifies the time period after
                    which session timeout occurs, if no input is
                    provided by the user. The default value is 600
                    seconds. The exact range of valid values for
                    this object is implementation dependent;
                    consult the product documentation to determine
                    the supported range for a specific product."
        DEFVAL      { 600 }
        ::= { hpicfBasicWebMgmtObjects 1 }

    hpicfBasicWebAgentInterface OBJECT-TYPE
        SYNTAX      INTEGER {
                        traditional(1),
                        improved(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The web management user interface style."
        DEFVAL      { traditional }
        ::= { hpicfBasicWebMgmtObjects 2 }


    -- Conformance information

    hpicfBasicConformance OBJECT IDENTIFIER ::= { hpicfBasicMib 1 }

    hpicfBasicCompliances OBJECT IDENTIFIER ::= { hpicfBasicConformance 1 }
    hpicfBasicGroups      OBJECT IDENTIFIER ::= { hpicfBasicConformance 2 }


    -- Compliance statements

    hpicfBasicCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********

                    A compliance statement for basic management and
                    configuration of HP ICF hubs."
        MODULE
        MANDATORY-GROUPS { hpicfBasicGroup }
        GROUP       hpicfTelnetGroup
        DESCRIPTION "This group is required for devices that support telnet access."
        ::= { hpicfBasicCompliances 1 }

    hpicfNewBasicCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********

                    A new compliance statement for this module."
        MODULE
        MANDATORY-GROUPS { hpicfNewBasicGroup,
                           hpicfBasicIpConfigGroup,
                           hpicfBasicIpxConfigGroup,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicTrapDestGroup,
                           hpicfBasicRmonNVGroup,
                           hpicfBasicSelfTestNotifyGroup }

        GROUP       hpicfDiscoverGroup
        DESCRIPTION "This group is required for devices that use
                     the mapping announcement feature for topology.
                     This method is generally only used in devices
                     that would ordinarily not be originating traffic
                     other than responses to network management
                     requests (e.g. repeaters and switches)."

        OBJECT      hpicfIpConfigPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        OBJECT      hpicfTrapDestFilter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfTrapDestVersion
        SYNTAX      INTEGER { snmpv1(1) }
        DESCRIPTION "Support for the 'snmpv2c' enumeration should
                    only be implemented if the agent supports the
                    Community-based SNMPv2 framework."

        ::= { hpicfBasicCompliances 2 }

    hpicfBasicCompliance3 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"

        MODULE
        MANDATORY-GROUPS { hpicfNewBasicGroup,
                           hpicfBasicIpConfigGroup2,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicTrapDestGroup,
                           hpicfBasicSelfTestNotifyGroup }

        GROUP       hpicfBasicIpxConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support management access over an IPX
                    protocol stack."

        GROUP       hpicfAnnounceDiscoveryGroup
        DESCRIPTION "This group is required for devices that use
                    the mapping announcement feature for topology.
                    This method is generally only used in devices
                    that would ordinarily not be originating traffic
                    other than responses to network management
                    requests (e.g. repeaters and switches)."

        GROUP       hpicfBasicRmonNVGroup
        DESCRIPTION "This group is only required for devices that
                    allow management stations to selectively store
                    RMON alarms and events in non-volatile memory."

        OBJECT      hpicfIpGlobalPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        OBJECT      hpicfTrapDestFilter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfTrapDestVersion
        SYNTAX      INTEGER { snmpv1(1) }
        DESCRIPTION "Support for the 'snmpv2c' enumeration should
                    only be implemented if the agent supports the
                    Community-based SNMPv2 framework."

        ::= { hpicfBasicCompliances 3 }


    hpicfBasicCompliance4 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
        MANDATORY-GROUPS { hpicfNewBasicGroup,
                           hpicfBasicIpConfigGroup2,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicSelfTestNotifyGroup }

        GROUP       hpicfBasicIpxConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support management access over an IPX
                    protocol stack."

        GROUP       hpicfAnnounceDiscoveryGroup
        DESCRIPTION "This group is required for devices that use
                    the mapping announcement feature for topology.
                    This method is generally only used in devices
                    that would ordinarily not be originating traffic
                    other than responses to network management
                    requests (e.g. repeaters and switches)."

        GROUP       hpicfBasicRmonNVGroup
        DESCRIPTION "This group is only required for devices that
                    allow management stations to selectively store
                    RMON alarms and events in non-volatile memory."

        GROUP       hpicfSnmpTargetAddrLogFilterGroup
        DESCRIPTION "This group is required for devices that supports
                     SNMPv3 and log filtering."

        OBJECT      hpicfIpGlobalPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        ::= { hpicfBasicCompliances 4 }

    hpicfBasicCompliance5 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION  "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
        MANDATORY-GROUPS { hpicfNewBasicGroup,
                           hpicfBasicIpConfigGroup3,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicSelfTestNotifyGroup,
                           hpicfBasicBannerGroup }

        GROUP       hpicfBasicIpxConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support management access over an IPX
                    protocol stack."

        GROUP       hpicfAnnounceDiscoveryGroup
        DESCRIPTION "This group is required for devices that use
                    the mapping announcement feature for topology.
                    This method is generally only used in devices
                    that would ordinarily not be originating traffic
                    other than responses to network management
                    requests (e.g. repeaters and switches)."

        GROUP       hpicfBasicRmonNVGroup
        DESCRIPTION "This group is only required for devices that
                    allow management stations to selectively store
                    RMON alarms and events in non-volatile memory."

        GROUP       hpicfSnmpTargetAddrLogFilterGroup
        DESCRIPTION "This group is required for devices that supports
                    SNMPv3 and log filtering."

        OBJECT      hpicfIpGlobalPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        ::= { hpicfBasicCompliances 5 }

    hpicfBasicCompliance6 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
        MANDATORY-GROUPS { hpicfNewBasicGroup,
                           hpicfBasicIpConfigGroup3,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicSelfTestNotifyGroup
                           }

        GROUP       hpicfBasicIpxConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support management access over an IPX
                    protocol stack."

        GROUP       hpicfAnnounceDiscoveryGroup
        DESCRIPTION "This group is required for devices that use
                    the mapping announcement feature for topology.
                    This method is generally only used in devices
                    that would ordinarily not be originating traffic
                    other than responses to network management
                    requests (e.g. repeaters and switches)."

        GROUP       hpicfBasicRmonNVGroup
        DESCRIPTION "This group is only required for devices that
                    allow management stations to selectively store
                    RMON alarms and events in non-volatile memory."

        GROUP       hpicfSnmpTargetAddrLogFilterGroup
        DESCRIPTION "This group is required for devices that supports
                    SNMPv3 and log filtering."

        OBJECT      hpicfIpGlobalPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        GROUP       hpicfBasicDNSConfigGroup2
        DESCRIPTION "This group is only required for devices that
                    support DNS resolver capability."

        ::= { hpicfBasicCompliances 6 }

    hpicfBasicCompliance7 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********"
        MODULE
        MANDATORY-GROUPS { hpicfBasicGroup1,
                           hpicfBasicIpConfigGroup3,
                           hpicfBasicFixedTrapGroup,
                           hpicfBasicSelfTestNotifyGroup
                           }

        GROUP       hpicfBasicIpxConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support management access over an IPX
                    protocol stack."

        GROUP       hpicfAnnounceDiscoveryGroup
        DESCRIPTION "This group is required for devices that use
                    the mapping announcement feature for topology.
                    This method is generally only used in devices
                    that would ordinarily not be originating traffic
                    other than responses to network management
                    requests (e.g. repeaters and switches)."

        GROUP       hpicfBasicRmonNVGroup
        DESCRIPTION "This group is only required for devices that
                    allow management stations to selectively store
                    RMON alarms and events in non-volatile memory."

        GROUP       hpicfSnmpTargetAddrLogFilterGroup
        DESCRIPTION "This group is required for devices that supports
                    SNMPv3 and log filtering."

        OBJECT      hpicfIpGlobalPingRouter
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is only required
                    in devices that would ordinarily not be
                    originating traffic other than responses to
                    network management requests (e.g. repeaters and
                    switches)."

        OBJECT      hpicfIpConfigMtu
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required."

        OBJECT      hpicfFixedTrapEventIndex
        MIN-ACCESS  read-only
        DESCRIPTION "Write access to this object is not required.
                    This would allow configuration of the
                    community name and action to be taken for each
                    fixed trap, but would not allow changing the
                    eventIndex that the trap points to."

        GROUP       hpicfBasicDNSConfigGroup
        DESCRIPTION "This group is only required for devices that
                    support DNS resolver capability."

        ::= { hpicfBasicCompliances 7 }

    hpicfBasicSNMPConfigCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for SNMP entities
                     which implements enabling/disabling of
                     SNMP v1/v2/v3 and for enabling/disabling
                     SNMP support for hpSwitchAuthenticationMIB."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfSNMPConfigGroup }
        ::= { hpicfBasicCompliances 8 }

    hpicfBasicConfigCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for config entities
                     which implements basic configuration of the switch."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfBasicConfigGroup }
        ::= { hpicfBasicCompliances 9 }

    hpicfBasicComplianceOobm MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for devices implementing the
                     HP DNS Server Mib with OOBM support"
        MODULE
        GROUP       hpicfInetDNSNameServerOobmGroup
        DESCRIPTION "A collection of objects for configuring DNS with OOBM."
        ::= { hpicfBasicCompliances 10 }

    hpicfBasicCompliance8 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for SNMP entities
                     SNMP support for hpSwitchAuthenticationMIB."
        MODULE      -- this module

        GROUP       hpicfBasicObjectsGroup
        DESCRIPTION "A collection of deprecated objects"

        GROUP       hpicfBasicWebAgentGroup
        DESCRIPTION "A collection of objects for managing the EHTTPD
                    server in ICF devices."

        GROUP       hpicfBasicProxyArpGroup
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."

        GROUP       hpicfBasicIpSecondaryGroup
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."

        GROUP       hpicfBasicObjectsGroup1
        DESCRIPTION "A collection of deprecated objects"

        ::= { hpicfBasicCompliances 11 }

    hpicfBasicCompliance9 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for SNMP entities
                     which implements DNS domain configurations."
        MODULE      -- this module

        GROUP       hpicfBasicDNSGroup1
        DESCRIPTION "A group of objects for DNS configuration
                    parameters."

        ::= { hpicfBasicCompliances 12 }

    hpicfBasicCompliance10 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities
                     which implements DNS domain configurations."
        MODULE       -- this module

        GROUP       hpicfBasicDNSConfigGroup1
        DESCRIPTION "A group of objects for DNS configuration
                    parameters."

        ::= { hpicfBasicCompliances 13 }

     hpicfBasicCompliance11 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities
                     which implements DNS domain configurations."
        MODULE       -- this module

        GROUP       hpicfBasicDNSGroup2
        DESCRIPTION "A group of objects for DNS configuration
                    parameters."

        ::= { hpicfBasicCompliances 14 }

    hpicfBasicCompliance12 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for SNMP entities
                     SNMP support for hpSwitchAuthenticationMIB."
        MODULE      -- this module

        GROUP       hpicfBasicObjectsGroup1
        DESCRIPTION "A collection of deprecated objects"

        GROUP       hpicfBasicWebAgentGroup
        DESCRIPTION "A collection of objects for managing the EHTTPD
                    server in ICF devices."

        GROUP       hpicfBasicProxyArpGroup
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."

        GROUP       hpicfBasicIpSecondaryGroup
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."

        ::= { hpicfBasicCompliances 15 }

    hpicfBasicLogFilterConfigCompliance MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for devices implementing
                    support for log filtering."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfBasicLogFilterConfigGroup }
        ::= { hpicfBasicCompliances 16 }

    hpicfBasicCompliance13 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for SNMP entities that
                     implement support for hpSwitchAuthenticationMIB
                     and web management session configurations."
        MODULE       -- this module

        GROUP       hpicfBasicObjectsGroup1
        DESCRIPTION "A collection of deprecated objects"

        GROUP       hpicfBasicProxyArpGroup
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."

        GROUP       hpicfBasicIpSecondaryGroup
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."

        GROUP       hpicfBasicWebAgentGroup1
        DESCRIPTION "A group of objects for managing the web
                    management sessions."

        ::= { hpicfBasicCompliances 17 }

    hpicfBasicSNMPConfigCompliance1 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "********* THIS COMPLIANCE IS DEPRECATED *********
                     The compliance statement for SNMP entities
                     which implements enabling/disabling of
                     SNMP v1/v2/v3, enabling/disabling
                     SNMP support for hpSwitchAuthenticationMIB,
                     and allowing/blocking the unsecured SNMP
                     access to hpicfMACsec MIB and ieee8021SecY MIB."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfSNMPConfigGroup1 }
        ::= { hpicfBasicCompliances 18 }

    hpicfBasicCompliance19 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities that
                     implement support for the HP ICF basic MIB."
        MODULE       -- this module

        GROUP       hpicfBasicObjectsGroup1
        DESCRIPTION "A collection of deprecated objects"

        GROUP       hpicfBasicProxyArpGroup
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."

        GROUP       hpicfBasicIpSecondaryGroup
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."

        ::= { hpicfBasicCompliances 19 }

    hpicfBasicLogFilterConfigCompliance2 MODULE-COMPLIANCE
        STATUS      deprecated
        DESCRIPTION "The compliance statement for devices implementing
                    support for log filtering."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfBasicLogFilterConfigGroup2 }
        ::= { hpicfBasicCompliances 20 }

    hpicfBasicWebAgentCompliance1 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities that
                     implement support for hpicfBasicWebAgentGroup2."
        MODULE       -- this module
        GROUP       hpicfBasicWebAgentGroup2
        DESCRIPTION "A group of objects for managing web sessions."
        ::= { hpicfBasicCompliances 21 }

    hpicfBasicCurDNSNameServerCompliance1 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities that
                     implement support for hpicfBasicCurDNSNameServerGroup1."
        MODULE       -- this module
        GROUP       hpicfBasicCurDNSNameServerGroup1
        DESCRIPTION "A group of objects for managing DNS."
        ::= { hpicfBasicCompliances 22 }

    hpicfBasicLogFilterConfigCompliance3 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for devices implementing
                    support for log filtering."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfBasicLogFilterConfigGroup3 }
        ::= { hpicfBasicCompliances 23 }

    hpicfLoggingURLCompliance MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for logging URL"
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfLoggingURLGroup }
        ::= { hpicfBasicCompliances 24 }

    hpicfBasicConfigCompliance1 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for config entities
        which implements basic configuration of the switch."
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfBasicConfigGroup1 }
        ::= { hpicfBasicCompliances 25 }

    hpicfBasicSNMPConfigCompliance2 MODULE-COMPLIANCE
        STATUS      current
        DESCRIPTION "The compliance statement for SNMP entities
                     which implements enabling/disabling of
                     SNMP v1/v2/v3, enabling/disabling
                     SNMP support for hpSwitchAuthenticationMIB,
                     and allowing/blocking the unsecured SNMP
                     access to hpicfMACsec MIB and ieee8021SecY MIB.
                     hpicfSwitchSnmpEnabledTrapEventList - To
                     enable snmp trap for specified event-list"
        MODULE       -- this module
        MANDATORY-GROUPS { hpicfSNMPConfigGroup2 }
        ::= { hpicfBasicCompliances 26 }

    -- units of conformance

    hpicfBasicGroup OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for basic reset/selftest
                    control on ICF devices."
        ::= { hpicfBasicGroups 1 }

    hpicfTelnetGroup OBJECT-GROUP
        OBJECTS     { hpicfTelnetEnable }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for managing the telnet
                    server on ICF devices."
        ::= { hpicfBasicGroups 2 }

    hpicfNewBasicGroup OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest,
                      hpicfTelnetEnable,
                      hpicfConfigClear,
                      hpicfSelfTestResultCode,
                      hpicfSelfTestResultText,
                      hpicfSelfTestResultTime,
                      hpicfBannerStatus }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for basic management of
                    ICF devices."
        ::= { hpicfBasicGroups 3 }

    hpicfDiscoverGroup OBJECT-GROUP
        OBJECTS     { hpicfAnnounceAddress,
                      hpicfIfEntLogicalIndex }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects to assist in discovering
                    and mapping ICF devices."
        ::= { hpicfBasicGroups 4 }

    hpicfBasicIpConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigDefaultRouter,
                      hpicfIpConfigPingRouter,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for configuring the IP
                    protocol stack in ICF agents."
        ::= { hpicfBasicGroups 5 }

    hpicfBasicIpxConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfIpxConfigNodeAddress,
                      hpicfIpxConfigDefaultRouter,
                      hpicfIpxConfigRouterEncaps,
                      hpicfIpxConfigAdminStatus,
                      hpicfIpxNetNumber
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the IPX
                    protocol stack in ICF agents."
        ::= { hpicfBasicGroups 6 }

    hpicfBasicFixedTrapGroup OBJECT-GROUP
        OBJECTS     { hpicfFixedTrapEventIndex }
        STATUS      current
        DESCRIPTION "A collection of objects for managing fixed
                    (i.e. non-threshold) traps on ICF devices.
                    Implementation of this group requires
                    implementation of the RMON event group."
        ::= { hpicfBasicGroups 7 }

    hpicfBasicTrapDestGroup OBJECT-GROUP
        OBJECTS     { hpicfTrapDestVersion,
                      hpicfTrapDestCommunity,
                      hpicfTrapDestTDomain,
                      hpicfTrapDestTAddress,
                      hpicfTrapDestFilter,
                      hpicfTrapDestStatus
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for configuring trap
                    destinations on ICF devices.  Implementation of this
                    group requires implementation of the RMON event
                    group."
        ::= { hpicfBasicGroups 8 }

    hpicfBasicRmonNVGroup OBJECT-GROUP
        OBJECTS     { hpicfBasicAlarmNVCapacity,
                      hpicfBasicAlarmStorageType,
                      hpicfBasicEventNVCapacity,
                      hpicfBasicEventStorageType
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for controlling which
                    RMON alarm and event table entries are saved in
                    non-volatile storage."
        ::= { hpicfBasicGroups 9 }

    hpicfBasicSelfTestNotifyGroup NOTIFICATION-GROUP
        NOTIFICATIONS { hpicfSelfTestTrap }
        STATUS        current
        DESCRIPTION   "A collection of notifications used to indicate
                      changes in selfTest status"
        ::= { hpicfBasicGroups 10 }

    hpicfBasicWebAgentGroup OBJECT-GROUP
        OBJECTS     { hpicfWebAgentEnable }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for managing the EHTTPD
                    server in ICF devices."
        ::= { hpicfBasicGroups 11 }

    hpicfAnnounceDiscoveryGroup OBJECT-GROUP
        OBJECTS     { hpicfAnnounceDiscoveryAddress }
        STATUS      current
        DESCRIPTION "A collection of objects to assist in discovering
                    and mapping ICF devices."
        ::= { hpicfBasicGroups 12 }

    hpicfBasicIpConfigGroup2 OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus,
                      hpicfIpGlobalDefaultRouter,
                      hpicfIpGlobalPingRouter
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for configuring the IP
                    protocol stack in agents that support only a
                    single global default router."
        ::= { hpicfBasicGroups 13 }

    hpicfBasicProxyArpGroup OBJECT-GROUP
        OBJECTS     { hpicfIpConfigProxyArp }
        STATUS      current
        DESCRIPTION "A group of objects for configuring proxy ARP
                    on devices that support IP forwarding."
        ::= { hpicfBasicGroups 14 }

    hpicfBasicIpSecondaryGroup OBJECT-GROUP
        OBJECTS     { hpicfIpAddrMask,
                      hpicfIpAddrStatus
                    }
        STATUS      current
        DESCRIPTION "A group of objects for configuring secondary IP
                    addresses on devices that support more than one
                    IP address on an interface."
        ::= { hpicfBasicGroups 15 }

    hpicfSnmpTargetAddrLogFilterGroup OBJECT-GROUP
        OBJECTS     { hpicfSnmpTargetAddrLogFilter }
        STATUS      current
        DESCRIPTION "A group of objects to add an HpicfSnmpTargetAddrLogFilterEntry
                     to snmpTargetAddrTable."
        ::= { hpicfBasicGroups 16 }

    hpicfBasicIpConfigGroup3 OBJECT-GROUP
        OBJECTS     { hpicfIpConfigAddress,
                      hpicfIpConfigAddrMask,
                      hpicfIpConfigMtu,
                      hpicfIpConfigAdminStatus,
                      hpicfIpGlobalDefaultRouter,
                      hpicfIpGlobalPingRouter,
                      hpicfIpZeroBroadcastEnable
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the IP
                    protocol stack in agents that support only a
                    single global default router."
        ::= { hpicfBasicGroups 17 }

    hpicfBasicBannerGroup OBJECT-GROUP
        OBJECTS     { hpicfBannerMOTD,
                      hpicfExecBannerStatus,
                      hpicfBannerExec
                    }
        STATUS      current
        DESCRIPTION "A group of objects for configuring banners for
                     display on console and web-ui at login"
        ::= { hpicfBasicGroups 18 }

    hpicfBasicDNSConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfDNSDefaultDomainSuffix,
                      hpicfDNSNameServerEntryStatus
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for configuring the DNS
                     resolver facility in agents that are capable of
                     resolving host names to IP addresses."
        ::= { hpicfBasicGroups 19 }

    hpicfBasicGroup1 OBJECT-GROUP
        OBJECTS     { hpicfReset,
                      hpicfSelfTest,
                      hpicfTelnetEnable,
                      hpicfConfigClear,
                      hpicfSelfTestResultCode,
                      hpicfSelfTestResultText,
                      hpicfSelfTestResultTime,
                      hpicfBannerStatus,
                      hpicfResetDefault }
        STATUS      current
        DESCRIPTION "A collection of objects for basic management of
                    ICF devices."
        ::= { hpicfBasicGroups 20 }

   hpicfSNMPConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfSnmpV2Enable,
                      hpSwitchSnmpViewConfig
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for enabling/disabling
                    of SNMP v1/v2/v3 and for enabling/disabling
                    SNMP support for hpSwitchAuthenticationMIB."
        ::= { hpicfBasicGroups 21 }

    hpicfBasicConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfDisplayLogNumbers,
                      hpicfIncludeCredentials
                    }
        STATUS      deprecated
        DESCRIPTION "A collection of objects for basic configuration
                    of the switch."
        ::= { hpicfBasicGroups 22 }

    hpicfInetDNSNameServerOobmGroup OBJECT-GROUP
        OBJECTS     { hpicfInetDNSNameServerEntryIsOobm }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the
                    DNS server entry with support for OOBM
                    (Out of Band Management) interface."
        ::= { hpicfBasicGroups 23 }

    hpicfBasicObjectsGroup OBJECT-GROUP
        OBJECTS     { hpicfIpConfigLocalProxyArp,
                      hpicfTrapDestNotifyType,
                      hpicfTrapDestRetries,
                      hpicfTrapDestTimeout,
                      hpicfInetDNSNameServerEntryStatus,
                      hpicfExecBannerStatus,
                      hpicfBannerExec,
                      hpicfTelnet6Enable }
        STATUS      deprecated
        DESCRIPTION "A collection of deprecated objects"
        ::= { hpicfBasicGroups 24 }

    hpicfBasicDNSGroup1 OBJECT-GROUP
        OBJECTS     { hpicfDNSDefaultDomainSuffixIsOobm,
                      hpicfDNSConfigMode,
                      hpicfCurDNSDefaultDomainSuffix
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for DNS configuration
                    parameters."
        ::= { hpicfBasicGroups 25 }

    hpicfBasicDNSConfigGroup1 OBJECT-GROUP
        OBJECTS     { hpicfDNSDomainSuffix }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the DNS
                     resolver facility in agents that are capable of
                     resolving host names to IP addresses."
        ::= { hpicfBasicGroups 26 }

    hpicfBasicObjectsGroup1 OBJECT-GROUP
        OBJECTS     { hpicfIpConfigLocalProxyArp,
                      hpicfTrapDestNotifyType,
                      hpicfTrapDestRetries,
                      hpicfTrapDestTimeout,
                      hpicfInetDNSNameServerEntryStatus,
                      hpicfExecBannerStatus,
                      hpicfBannerExec,
                      hpicfLastLoginBannerStatus,
                      hpicfTelnet6Enable,
                      hpicfBannerExec1 }
        STATUS      current
        DESCRIPTION "A collection of deprecated objects"
        ::= { hpicfBasicGroups 27 }

    hpicfBasicDNSConfigGroup2 OBJECT-GROUP
        OBJECTS     { hpicfDNSNameServerEntryStatus }
        STATUS      current
        DESCRIPTION "A collection of objects for configuring the DNS
                     resolver facility in agents that are capable of
                     resolving host names to IP addresses."
        ::= { hpicfBasicGroups 28 }

    hpicfBasicDNSGroup2 OBJECT-GROUP
        OBJECTS     { hpicfDNSDefaultDomainSuffixIsOobm,
                      hpicfDNSConfigMode
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for DNS configuration
                    parameters."
        ::= { hpicfBasicGroups 29 }

    hpicfBasicLogFilterConfigGroup OBJECT-GROUP
        OBJECTS     { hpicfBasicLogFilterName,
                      hpicfBasicLogFilterEnable,
                      hpicfBasicLogFilterDropCounter,
                      hpicfBasicLogSubFilterSeqNum,
                      hpicfBasicLogSubFilterType,
                      hpicfBasicLogSubFilterSeverity,
                      hpicfBasicLogSubFilterEventNum,
                      hpicfBasicLogSubFilterRegExp,
                      hpicfBasicLogSubFilterAction,
                      hpicfBasicLogSubFilterMatchCounter
                    }
        STATUS      deprecated
        DESCRIPTION "A collection of objects for log filters configuration."
       ::= { hpicfBasicGroups 30 }

    hpicfBasicWebAgentGroup1 OBJECT-GROUP
        OBJECTS     { hpicfWebAgentEnable,
                      hpicfBasicWebAgentIdleTime
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********

                    A collection of objects for managing the web
                    management sessions."
        ::= { hpicfBasicGroups 31 }

    hpicfSNMPConfigGroup1 OBJECT-GROUP
        OBJECTS     { hpicfSnmpV2Enable,
                      hpSwitchSnmpViewConfig,
                      hpicfSwitchSnmpAllowUnsecuredAccessToMACsec,
                      hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy
                    }
        STATUS      deprecated
        DESCRIPTION "********* THIS GROUP IS DEPRECATED *********
                    A collection of objects for enabling/disabling
                    of SNMP v1/v2/v3, for enabling/disabling
                    SNMP support for hpSwitchAuthenticationMIB,
                    for allowing/blocking of
                    hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
                    and for allowing/blocking of
                    hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy."
        ::= { hpicfBasicGroups 32 }

    hpicfBasicLogFilterConfigGroup2 OBJECT-GROUP
        OBJECTS     { hpicfBasicLogFilterEnable,
                      hpicfBasicLogFilterDropCounter,
                      hpicfBasicLogFilterRowStatus,
                      hpicfBasicLogSubFilterType,
                      hpicfBasicLogSubFilterSeverity,
                      hpicfBasicLogSubFilterEventNum,
                      hpicfBasicLogSubFilterRegExp,
                      hpicfBasicLogSubFilterAction,
                      hpicfBasicLogSubFilterMatchCounter,
                      hpicfBasicLogSubFilterRowStatus,
                      hpicfBasicLogFiltersClearCounters
                    }
        STATUS      deprecated
        DESCRIPTION "A collection of objects for log filters configuration."
       ::= { hpicfBasicGroups 33 }

    hpicfBasicWebAgentGroup2 OBJECT-GROUP
        OBJECTS     { hpicfWebAgentEnable,
                      hpicfBasicWebAgentIdleTime,
                      hpicfBasicWebAgentInterface
                    }
        STATUS      current
        DESCRIPTION "A group of objects for managing web sessions."
        ::= { hpicfBasicGroups 34 }

    hpicfBasicCurDNSNameServerGroup1 OBJECT-GROUP
        OBJECTS     { hpicfCurDNSNameServerEntryStatus }
        STATUS      current
        DESCRIPTION "A collection of objects for managing DNS."
        ::= { hpicfBasicGroups 35 }

    hpicfBasicLogFilterConfigGroup3 OBJECT-GROUP
        OBJECTS     { hpicfBasicLogFilterEnable,
                      hpicfBasicLogFilterDropCounter,
                      hpicfBasicLogFilterRowStatus,
                      hpicfBasicLogSubFilterType,
                      hpicfBasicLogSubFilterSeverity,
                      hpicfBasicLogSubFilterEventNum,
                      hpicfBasicLogSubFilterRegExp,
                      hpicfBasicLogSubFilterAction,
                      hpicfBasicLogSubFilterMatchCounter,
                      hpicfBasicLogSubFilterRowStatus,
                      hpicfBasicLogFiltersClearCounters,
                      hpicfBasicLogPerIpFilterType,
                      hpicfBasicLogPerIpFilterSeverity,
                      hpicfBasicLogPerIpFilterEventList,
                      hpicfBasicLogPerIpFilterAction,
                      hpicfBasicLogPerIpFilterSysModule,
                      hpicfBasicLogPerIpFilterRowStatus
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for log filters configuration."
       ::= { hpicfBasicGroups 36 }

    hpicfLoggingURLGroup OBJECT-GROUP
        OBJECTS     { hpicfperIploggingurlUrl,
                      hpicfperIploggingurlFilterName,
                      hpicfperIploggingurlRowStatus     
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for managing URL."
        ::= { hpicfBasicGroups 37 }

    hpicfBasicConfigGroup1 OBJECT-GROUP
        OBJECTS     { hpicfDisplayLogNumbers,
                      hpicfIncludeCredentials,
                      hpicfIncludeCredClearPassKey
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for basic configuration
                     of the switch."
        ::= { hpicfBasicGroups 38 }

    hpicfSNMPConfigGroup2 OBJECT-GROUP
        OBJECTS     { hpicfSnmpV2Enable,
                      hpSwitchSnmpViewConfig,
                      hpicfSwitchSnmpAllowUnsecuredAccessToMACsec,
                      hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy,
                      hpicfSwitchSnmpEnabledTrapEventList
                    }
        STATUS      current
        DESCRIPTION "A collection of objects for enabling/disabling
                    of SNMP v1/v2/v3, for enabling/disabling
                    SNMP support for hpSwitchAuthenticationMIB,
                    for allowing/blocking of
                    hpicfSwitchSnmpAllowUnsecuredAccessToMACsec
                    and for allowing/blocking of
                    hpicfSwitchSnmpAllowUnsecuredAccessToIeee8021Secy.
                    hpicfSwitchSnmpEnabledTrapEventList - To
                    enable snmp trap for specified event-list"
        ::= { hpicfBasicGroups 39 }
END
