-- ACLMGMT mib 
-- Draft Ver 0.3 2003/3/30 04:04U 
-- History: 
--   Index in the Mask and Rule table, change their ACCESS from read-create to read-only
-- --------------------------------------------------------------------------------------
-- Draft Ver 0.1 2003/2/27 02:44U by Scott Sung
-- Draft Ver 0.2 2003/3/12 10:43U by Richard Chang
-- Draft Ver 0.3 2003/8/13 10:43U by Scott Sung ,add swACLIpTCPFlagBit for DGS3x12S
-- --------------------------------------------------------------------------------------
SW-ACLMGMT-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        Counter32,Counter64,TimeTicks,NOTIFICATION-TYPE,
        MODULE-IDENTITY,OBJECT-TYPE,IpAddress, Unsigned32
                                        FROM SNMPv2-SMI
        MacAddress, RowStatus           FROM SNMPv2-TC
        DisplayString                   FROM RFC1213-MIB
    	SnmpAdminString			FROM SNMP-FRAMEWORK-MIB
    	dlink-mgmt  	                FROM DLINK-ID-REC-MIB
    	PortList			FROM Q-BRIDGE-MIB;
    	
    swAclMgmtMIB MODULE-IDENTITY
	    LAST-UPDATED "0007150000Z"
	    ORGANIZATION "enterprise, Inc."
	    CONTACT-INFO
	        "   Customer Service

		    Postal: 

		       Tel: 

		    E-mail: "
	    DESCRIPTION
		    "The Structure of Access Control List  Information for the
		    proprietary enterprise."
        ::= { dlink-mgmt  5 }

    swAclMaskMgmt                OBJECT IDENTIFIER ::= { swAclMgmtMIB 1 }
    swAclRuleMgmt                OBJECT IDENTIFIER ::= { swAclMgmtMIB 2 }

     
--***************************************************************************
--swACLEthernetTable
--***************************************************************************
    swACLEthernetTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SwACLEthernetEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table contain ACL mask of Ethernet information.
             Access profiles will be created on the switch by row creation and to
              define which parts of each incoming frame's layer 2 part of header
              the switch will examine.  Masks can be entered that will be combined 
              with the values the switch finds in the  specified frame header fields.  "
        ::= { swAclMaskMgmt 1 }
        
    swACLEthernetEntry OBJECT-TYPE
        SYNTAX  SwACLEthernetEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of information about ACL of Ethernet."
        INDEX  { swACLEthernetProfileID }
        ::= { swACLEthernetTable 1 }
      
    SwACLEthernetEntry ::= 
        SEQUENCE {
            swACLEthernetProfileID
                INTEGER,
            swACLEthernetUsevlan
                INTEGER,
            swACLEthernetMacAddrMaskState
                INTEGER,
            swACLEthernetSrcMacAddrMask
                MacAddress,
            swACLEthernetDstMacAddrMask
                MacAddress,
            swACLEthernetUse8021p
                INTEGER,
            swACLEthernetUseEthernetType
                INTEGER, 
          --del by ynot 2-19             
            --swACLEthernetPermit
                --INTEGER,  
           --add by ynot  
            swACLEthernetPort
            	PortList,
           --end                
            swACLEthernetRowStatus
                RowStatus
                                                           
        }
    swACLEthernetProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only	--read-create
        STATUS  current
        DESCRIPTION
            "The ID of ACL mask entry ,and is unique in the mask list."
        ::= { swACLEthernetEntry 1 }
    
    swACLEthernetUsevlan OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the switch will examine the VLAN part of each packet header."
        ::= { swACLEthernetEntry 2 }        

    swACLEthernetMacAddrMaskState OBJECT-TYPE
		SYNTAX  INTEGER {
               other(1),
               dst-mac-addr(2),
               src-mac-addr(3),
               dst-src-mac-addr(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of MAC address mask. 

            other(1) - Neither source MAC address nor destination MAC address are 
                masked.
            dst-mac-addr(2) - recieved frames's destination MAC address are  
                currently used to be filtered as it meets with the MAC 
                address entry of the table.
            src-mac-addr(3) - recieved frames's source MAC address are currently 
                used to be filtered as it meets with the MAC address entry 
                of the table.
            dst-src-mac-addr(4) - recieved frames's destination MAC address or 
                source MAC address are currently used to be filtered as it meets
                with the MAC address entry of the table."
        ::= { swACLEthernetEntry 3 }    
        
    swACLEthernetSrcMacAddrMask OBJECT-TYPE
        SYNTAX  MacAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object Specifies the MAC address mask for the source MAC address."
        ::= { swACLEthernetEntry 4 }     
        
    swACLEthernetDstMacAddrMask OBJECT-TYPE
        SYNTAX  MacAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object  Specifies the  MAC address mask for the destination MAC address."
        ::= { swACLEthernetEntry 5 }   
        
    swACLEthernetUse8021p OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will examine the 802.1p priority value in the frame's header
              or not."
        ::= { swACLEthernetEntry 6 }     
        
    swACLEthernetUseEthernetType OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies if the switch will examine the Ethernet type value in each frame's header 
              or not."
        ::= { swACLEthernetEntry 7 }     
    
    --del by ynot 2-19    
    --swACLEthernetPermit OBJECT-TYPE
       -- SYNTAX  INTEGER {
       --        permit(1),
       --        deny(2)
        --       }
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
        --    "This object indicates resoult of examination is permit or deny;default is permit(1)
        --     permit - Specifies that packets that match the access profile are 
        --              permitted to be forwarded by the switch.
         --    deny - Specifies that packets that do not match the access profile
         --           are not permitted to be forwarded by the switch and will be filtered."
       -- ::= { swACLEthernetEntry 8 }  
        
             
     --add by ynot 
     swACLEthernetPort OBJECT-TYPE
        SYNTAX PortList
        MAX-ACCESS read-create
        STATUS current
        DESCRIPTION
            "This object indicates the portlist of this entry."
        ::= { swACLEthernetEntry  8 }        
        
        
    swACLEthernetRowStatus OBJECT-TYPE --swACLEthernetState
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { swACLEthernetEntry 9 }
   
        
--***************************************************************************
--swACLIpTable
--***************************************************************************  
    swACLIpTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SwACLIpEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table contain ACL mask of IP information.
             Access profiles will be created on the switch by row creation and to
              define which parts of each incoming frame's IP layer part of header
              the switch will examine.  Masks can be entered that will be combined 
              with the values the switch finds in the  specified frame header fields."
        ::= { swAclMaskMgmt 2 }
        
    swACLIpEntry OBJECT-TYPE
        SYNTAX  SwACLIpEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of information about ACL of IP Layer."
        INDEX  { swACLIpProfileID }
        ::= { swACLIpTable 1 }
      
    SwACLIpEntry ::= 
        SEQUENCE {
            swACLIpProfileID	
                INTEGER,
            swACLIpUsevlan
                INTEGER,
            swACLIpIpAddrMaskState
                INTEGER,
            swACLIpSrcIpAddrMask
                IpAddress,
            swACLIpDstIpAddrMask
                IpAddress,
            swACLIpUseDSCP		
                INTEGER,
            swACLIpUseProtoType
                INTEGER,        
            swACLIpIcmpOption	
                INTEGER,                        
            swACLIpIgmpOption
                INTEGER,                        
            swACLIpTcpOption
                INTEGER,                        
            swACLIpUdpOption	
             	INTEGER,   
	    swACLIpTCPorUDPSrcPortMask
			    OCTET STRING,	
	    swACLIpTCPorUDPDstPortMask
			    OCTET STRING,	     
	    swACLIpTCPFlagBit
				INTEGER,                                           
            swACLIpProtoIDOption
                INTEGER,                        
            swACLIpProtoIDMask
                OCTET STRING,
            swACLIpPort
            	PortList,
           --del by ynot 2-19	                     
            --swACLIpPermit		
               -- INTEGER,       
            swACLIpRowStatus	
                RowStatus,
           swACLIpTCPFlagBitMask
                INTEGER
                
                                                            
        }
    swACLIpProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only	
        STATUS  current
        DESCRIPTION
            "The ID of ACL mask entry ,and is unique in the mask list."
        ::= { swACLIpEntry 1 }
    
    swACLIpUsevlan OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates if IP layer vlan is examined or not."
        ::= { swACLIpEntry 2 }        

    swACLIpIpAddrMaskState OBJECT-TYPE
		SYNTAX  INTEGER {
               other(1),
               dst-ip-addr(2),
               src-ip-addr(3),
               dst-src-ip-addr(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of IP address mask. 

            other(1) - Neither source IP address nor destination IP address are 
                masked.
            dst-ip-addr(2) - recieved frames's destination IP address are 
                currently used to be filtered as it meets with the IP 
                address entry of the table.
            src-ip-addr(3) - recieved frames's source IP address are currently 
                used to be filtered as it meets with the IP address entry of
                the table.
            dst-src-ip-addr(4) - recieved frames's destination IP address or 
                source IP address are currently used to be filtered as it meets
                with the IP address entry of the table."
        ::= { swACLIpEntry 3 }    
        
    swACLIpSrcIpAddrMask OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object Specifies IP address mask for the source IP address."
        ::= { swACLIpEntry 4 }     
        
    swACLIpDstIpAddrMask OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object Specifies the IP address mask for the destination IP address."
        ::= { swACLIpEntry 5 }   
        
    swACLIpUseDSCP OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates DSCP protocol is is examined or not."
        ::= { swACLIpEntry 6 }     
        
    swACLIpUseProtoType OBJECT-TYPE
        SYNTAX  INTEGER {
               none(1),
               icmp(2),
               igmp(3),
               tcp(4),
               udp(5),
               protocolId(6)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "That object indicates which protocol will be examined."
        ::= { swACLIpEntry 7 }     

    swACLIpIcmpOption OBJECT-TYPE
        SYNTAX  INTEGER {
               none(1),
               type(2),
               code(3),
               type-code(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates which fields should be filled in of ICMP.
            none(1)- two fields are null.
            type(2)- type field should be filled in.     
            code(3)- code field should be filled in.  
            type-code(4)- not only type fileld but code field should be filled in.
            "
        ::= { swACLIpEntry 8 }     
        
    swACLIpIgmpOption OBJECT-TYPE
        SYNTAX  INTEGER {
               enable(1),
               disable(2)
              }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates Options of IGMP is examined or not."
        ::= { swACLIpEntry 9 }     

    swACLIpTcpOption OBJECT-TYPE
        SYNTAX  INTEGER {
               other(1),
               dst-addr(2),
               src-addr(3),
               dst-src-addr(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of filtered address of TCP. 

           	other(1) - Neither source port nor destination port are 
                masked.
            dst-addr(2) - recieved frames's destination port are 
                currently used to be filtered .
            src-addr(3) - recieved frames's source port are currently 
                used to be filtered .
            dst-src-addr(4) - both recieved frames's destination port and 
                source port are currently used to be filtered ."
        ::= { swACLIpEntry 10 }     
            
    swACLIpUdpOption OBJECT-TYPE
        SYNTAX  INTEGER {
               other(1),
               dst-addr(2),
               src-addr(3),
               dst-src-addr(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of filtered address of UDP . 

            other(1) - Neither source port nor destination port are 
                masked.
            dst-addr(2) - recieved frames's destination port are 
                currently used to be filtered .
            src-addr(3) - recieved frames's source port are currently 
                used to be filtered .
            dst-src-addr(4) - recieved frames's destination port or 
                source port are currently used to be filtered."

        ::= { swACLIpEntry 11 }         

    swACLIpTCPorUDPSrcPortMask OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(2)) 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies a TCP port mask for the source port  if swACLIpUseProtoType is TCP
             Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP.
             "
        ::= { swACLIpEntry 12 }     

    swACLIpTCPorUDPDstPortMask OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(2))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies a TCP port mask for the destination port  if swACLIpUseProtoType is TCP
             Specifies a UDP port mask for the destination port if swACLIpUseProtoType is UDP."
        ::= { swACLIpEntry 13 }         
	
	swACLIpTCPFlagBit OBJECT-TYPE
		SYNTAX  INTEGER {
               enable(1),
               disable(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies a TCP connection flag mask."
        ::= { swACLIpEntry 14 }                 

    swACLIpProtoIDOption OBJECT-TYPE
        SYNTAX  INTEGER {
               enable(1),
               disable(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the switch will examine each frame's Protocol ID field or not."
        ::= { swACLIpEntry 16 }    

    swACLIpProtoIDMask OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(4)) 
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the rule applies to the IP protocol ID and the mask options
             behind the IP header."
        ::= { swACLIpEntry 17 }     

--del by ynot 2-19
    --swACLIpPermit OBJECT-TYPE
      --  SYNTAX  INTEGER {
       --        deny(1),
       --        permit(2)
        --       }
       -- MAX-ACCESS  read-create
      --  STATUS  current
      --  DESCRIPTION
       --     "This object indicates filter is permit or deny;
       --      default is permit(1)"
       -- ::= { swACLIpEntry 18 }  

     --add by ynot
    swACLIpPort OBJECT-TYPE	
        SYNTAX  PortList
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the portlist of this entry."
        ::= { swACLIpEntry 18 } 
        
    swACLIpRowStatus OBJECT-TYPE	
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
       DESCRIPTION
            "This object indicates the status of this entry."
        ::= { swACLIpEntry 19 }
   
   --add 6-2     
    swACLIpTCPFlagBitMask OBJECT-TYPE
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "A value which indicates the set of TCP flags that this
            entity may potentially offers.  The value is a sum.  This
            sum initially takes the value zero, Then, for each flag, L,
            in the range 1 through 6, that this node performs
            transactions for, 2 raised to (L - 1) is added to the sum.
            Note that values should be calculated accordingly:

                 Flag      functionality
                   6        urg bit
                   5        ack bit
                   4        psh bit
                   3        rst bit
                   2		syn bit
                   1 		fin bit                 
			For example,it you want to enable urg bit and ack bit,you
			should set vlaue 48(2^(5-1) + 2^(6-1))."
        ::= { swACLIpEntry 115 } 
              
--****************************************************************************
--swACLPayloadEntry
--add by ynot 
--****************************************************************************
 swACLPayloadTable  OBJECT-TYPE
 SYNTAX  SEQUENCE OF SwACLPayloadEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table contain ACL mask of payload information."
            ::= { swAclMaskMgmt 3 }
      
swACLPayloadEntry OBJECT-TYPE
    SYNTAX  SwACLPayloadEntry
     MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This Entry contain ACL mask of payload information."
        INDEX  { swACLPayloadProfileID }
    ::= { swACLPayloadTable 1 }
            
SwACLPayloadEntry ::= 
        SEQUENCE {
        swACLPayloadProfileID
         	INTEGER,
        swACLPayloadPort
        	PortList,
        swACLPayloadOffSet0to15
        	OCTET STRING,
        swACLPayloadOffSet16to31
        	OCTET STRING,
        swACLPayloadOffSet32to47
        	OCTET STRING,
        swACLPayloadOffSet48to63
        	OCTET STRING,
        swACLPayloadOffSet64to79
        	OCTET STRING,	
        --swACLOffSet16to19
        --OCTET STRING,
       -- swACLOffSet20to23
        --	OCTET STRING,
       -- swACLOffSet24to27
        --	OCTET STRING,
        --swACLOffSet28to31
        --	OCTET STRING,
       -- swACLOffSet32to35
        --	OCTET STRING,
       -- swACLOffSet36to39
        --	OCTET STRING,
       -- swACLOffSet40to43
        --	OCTET STRING,
       -- swACLOffSet44to47
       -- 	OCTET STRING,
       -- swACLOffSet48to51
       -- 	OCTET STRING,
       -- swACLOffSet52to55
       --		 OCTET STRING,
       -- swACLOffSet56to59
       -- 	OCTET STRING,
       -- swACLOffSet60to63
     --   	OCTET STRING,
      --  swACLOffSet64to67
      --  	OCTET STRING,
     --   swACLOffSet68to71
      -- 		 OCTET STRING,
       -- swACLOffSet72to75
       -- 	OCTET STRING,
       -- swACLOffSet76to79
       --  	OCTET STRING,
  	 swACLPayloadRowStatus
       	RowStatus
        
       }
     
   swACLPayloadProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The ID of ACL mask entry ,and is unique in the mask list."
        ::= { swACLPayloadEntry 1 }
        
       swACLPayloadPort OBJECT-TYPE
        SYNTAX  PortList
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The portlist of ACL mask entry ."
       ::= { swACLPayloadEntry 2 }
       
       swACLPayloadOffSet0to15 OBJECT-TYPE
       SYNTAX  OCTET STRING  (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL mask entry ."
        ::= { swACLPayloadEntry 3 }
        
        swACLPayloadOffSet16to31 OBJECT-TYPE
         SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL mask entry ."
        ::= { swACLPayloadEntry 4 }
       
        swACLPayloadOffSet32to47 OBJECT-TYPE
       SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL mask entry ."
        ::= { swACLPayloadEntry 5 }
        
        swACLPayloadOffSet48to63 OBJECT-TYPE
         SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL mask entry ."
        ::= { swACLPayloadEntry 6 }
       
        swACLPayloadOffSet64to79 OBJECT-TYPE
       SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL mask entry ."
        ::= { swACLPayloadEntry 7 }
        
     
       
       --swACLOffSet16to19 OBJECT-TYPE
       --SYNTAX  OCTET STRING
        --MAX-ACCESS  read-create
       -- STATUS  current
        --DESCRIPTION
        --    ""
       -- ::= { swACLPayloadEntry 3 }
        
       -- swACLOffSet20to23 OBJECT-TYPE
       --  SYNTAX  OCTET STRING
      --  MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
        --    ""
       -- ::= { swACLPayloadEntry 4 }
        
    --  swACLOffSet24to27 OBJECT-TYPE
      --  SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
        --    ""
       -- ::= { swACLPayloadEntry 5 }
     
        
        --swACLOffSet28to31 OBJECT-TYPE
       -- SYNTAX  OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadEntry 6 }
        
        --swACLOffSet32to35 OBJECT-TYPE
       -- SYNTAX  OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadEntry 7 }
        
       -- swACLOffSet36to39 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadEntry 8 }
        
       -- swACLOffSet40to43 OBJECT-TYPE
       -- SYNTAX  OCTET STRING
      --  MAX-ACCESS  read-create
      --  STATUS  current
       -- DESCRIPTION
        --    ""
       -- ::= { swACLPayloadEntry 9 }
        
        
        --swACLOffSet44to47 OBJECT-TYPE
        --SYNTAX   OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
       -- DESCRIPTION
       --     ""
        --::= { swACLPayloadEntry 10 }
        
        --swACLOffSet48to51 OBJECT-TYPE
        --SYNTAX  OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
         --   ""
        --::= { swACLPayloadEntry 11 }
        
       -- swACLOffSet52to55 OBJECT-TYPE
        --SYNTAX   OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
        --    ""
       -- ::= { swACLPayloadEntry 12 }
        
        --swACLOffSet56to59 OBJECT-TYPE
        --SYNTAX   OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
          --  ""
        --::= { swACLPayloadEntry 13 }
        
        --swACLOffSet60to63 OBJECT-TYPE
        --SYNTAX  OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
         --   ""
        --::= { swACLPayloadEntry 14 }
        
       -- swACLOffSet64to67 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
       --     ""
        --::= { swACLPayloadEntry 15 }
        
        --swACLOffSet68to71 OBJECT-TYPE
        --SYNTAX   OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
          --  ""
        --::= { swACLPayloadEntry 16 }
        
         --swACLOffSet72to75 OBJECT-TYPE
        --SYNTAX   OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
          --  ""
        --::= { swACLPayloadEntry 17 }
        
       --swACLOffSet76to79 OBJECT-TYPE
        --SYNTAX  OCTET STRING
        --MAX-ACCESS  read-create
        --STATUS  current
        --DESCRIPTION
       --     ""
       -- ::= { swACLPayloadEntry 18 }
        
       swACLPayloadRowStatus OBJECT-TYPE
       	SYNTAX RowStatus
       	MAX-ACCESS read-create
       	STATUS current
       	DESCRIPTION
       		"The status of the entry ."
       	::= {swACLPayloadEntry 8} 
        
        

--***************************************************************************
--swACLEtherRuleTable
--***************************************************************************  
    swACLEtherRuleTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SwACLEtherRuleEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "This table contain ACL rule of ethernet information."
        ::= { swAclRuleMgmt 1 }
        
    swACLEtherRuleEntry OBJECT-TYPE
        SYNTAX  SwACLEtherRuleEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "A list of information about ACL rule of the layer 2 part of each packet."
        INDEX  { swACLEtherRuleProfileID,swACLEtherRuleAccessID }
        ::= { swACLEtherRuleTable 1 }
      
    SwACLEtherRuleEntry ::= 
        SEQUENCE {
            swACLEtherRuleProfileID		
                INTEGER,
            swACLEtherRuleAccessID
                INTEGER,
            swACLEtherRuleVlan
                SnmpAdminString,
            swACLEtherRuleSrcMacAddress
                MacAddress,
            swACLEtherRuleDstMacAddress	
                MacAddress,             
            swACLEtherRule8021P
                INTEGER,        
            swACLEtherRuleEtherType
                OCTET STRING,   
            swACLEtherRuleEnablePriority
                INTEGER,
            swACLEtherRulePriority
                INTEGER,             
            swACLEtherRuleReplacePriority	
                INTEGER,       
            swACLEtherRuleEnableReplaceDscp
                INTEGER,                    
            swACLEtherRuleRepDscp	
                INTEGER, 
            --add by ynot
           --swACLEtherRulePort  
        	--PortList, 
       	    swACLEtherRulePermit
       	        INTEGER,                  
            swACLEtherRuleRowStatus
                RowStatus
                                          
        }
    swACLEtherRuleProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The ID of ACL mask entry ,and is unique in the mask list."
        ::= { swACLEtherRuleEntry 1 }
    
    swACLEtherRuleAccessID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only	
        STATUS  current
        DESCRIPTION
            "The ID of ACL rule entry relate to swACLEtherRuleProfileID."
        ::= { swACLEtherRuleEntry 2 }        
         
    swACLEtherRuleVlan OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access  will apply to only to this VLAN."
        ::= { swACLEtherRuleEntry 3 }     
        
    swACLEtherRuleSrcMacAddress OBJECT-TYPE
        SYNTAX  MacAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply to only packets with
             this source MAC address."
        ::= { swACLEtherRuleEntry 4 }   
        
    swACLEtherRuleDstMacAddress OBJECT-TYPE
        SYNTAX  MacAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply to only packets
              with this destination MAC address."
        ::= { swACLEtherRuleEntry 5 }       
        
    swACLEtherRule8021P OBJECT-TYPE
        SYNTAX  INTEGER(0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply only to packets with
              this 802.1p priority value."
        ::= { swACLEtherRuleEntry 6 }      
        
    swACLEtherRuleEtherType OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE (2))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply only to packets with this
             hexidecimal 802.1Q Ethernet type value in the packet header."
        ::= { swACLEtherRuleEntry 7 }      

    swACLEtherRuleEnablePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply only to packets with
             priority value."
        ::= { swACLEtherRuleEntry 8 }     
        
    swACLEtherRulePriority OBJECT-TYPE
        SYNTAX  INTEGER(0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the priority will change to the packets while the swACLEtherRuleReplacePriority
             is enabled ."
        ::= { swACLEtherRuleEntry 9 }     
        
    swACLEtherRuleReplacePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the packets that match the access profile will changed the
             802.1p priority tag field by the switch or not ."
        ::= { swACLEtherRuleEntry 10 }  
        
    swACLEtherRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the packets that match the access profile will replaced the
             DSCP field by the switch or not ."
        ::= { swACLEtherRuleEntry 11 }  

    swACLEtherRuleRepDscp OBJECT-TYPE	
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "specify a value to be written to the DSCP field of an incoming packet
             that meets the criteria specified in the first part of the command.
             This value will over-write the value in the DSCP field of the packet."
        ::= { swACLEtherRuleEntry 12 } 
        
        
     --add by ynot
    --swACLEtherRulePort OBJECT-TYPE	
       -- SYNTAX  PortList
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
        --    ""
       -- ::= { swACLEtherRuleEntry 13 } 
        
    swACLEtherRulePermit OBJECT-TYPE
        SYNTAX INTEGER{
        	deny(1),
        	permit(2)
        	}
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the permit status of this entry."
        ::= { swACLEtherRuleEntry 14 } 
        
        swACLEtherRuleRowStatus OBJECT-TYPE	
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { swACLEtherRuleEntry 15 } 
         
    
   

--***************************************************************************
--swACLIpRuleTable
--***************************************************************************  
    swACLIpRuleTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF SwACLIpRuleEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            ""
        ::= { swAclRuleMgmt 2 }
        
    swACLIpRuleEntry OBJECT-TYPE
        SYNTAX  SwACLIpRuleEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            ""
        INDEX  { swACLIpRuleProfileID , swACLIpRuleAccessID }
        ::= { swACLIpRuleTable 1 }
      
    SwACLIpRuleEntry ::= 
        SEQUENCE {
            swACLIpRuleProfileID
                INTEGER,
            swACLIpRuleAccessID
                INTEGER,
            swACLIpRuleVlan
                SnmpAdminString,
            swACLIpRuleSrcIpaddress  
            	IpAddress,
            swACLIpRuleDstIpaddress
            	IpAddress,
            swACLIpRuleDscp		 
            	INTEGER,
            swACLIpRuleProtocol
                INTEGER,
            swACLIpRuleType			
            	INTEGER,
            swACLIpRuleCode			
            	INTEGER,
            swACLIpRuleSrcPort		
            	INTEGER,
            swACLIpRuleDstPort		
            	INTEGER,
            swACLIpRuleFlagBits		
            	INTEGER,
            swACLIpRuleProtoID		
            	INTEGER,
            swACLIpRuleUserMask		
            	OCTET STRING,	
            swACLIpRuleEnablePriority
                INTEGER,
            swACLIpRulePriority
                INTEGER,             
            swACLIpRuleReplacePriority
                INTEGER,       
            swACLIpRuleEnableReplaceDscp
                INTEGER,                    
            swACLIpRuleRepDscp
                INTEGER,
                --add by ynot
    	    --swACLIpRulePort 
    	      --  PortList,
    	    swACLIpRulePermit
    	    	INTEGER,                    
            swACLIpRuleRowStatus	
                RowStatus
          
    	                                                     
        }
    swACLIpRuleProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The ID of ACL mask entry ,and is unique in the mask list."
        ::= { swACLIpRuleEntry 1 }
    
    swACLIpRuleAccessID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only	--read-create
        STATUS  current
        DESCRIPTION
            "The ID of ACL IP rule entry ."
        ::= { swACLIpRuleEntry 2 }        
        
    swACLIpRuleVlan OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access  will apply to only to this VLAN."
        ::= { swACLIpRuleEntry 3 }     
        
    swACLIpRuleSrcIpaddress OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific an IP source address."
        ::= { swACLIpRuleEntry 4 }  

    swACLIpRuleDstIpaddress OBJECT-TYPE
        SYNTAX  IpAddress
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific an IP destination address."
        ::= { swACLIpRuleEntry 5 }  
        
    swACLIpRuleDscp OBJECT-TYPE
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the value of dscp, the value can be configured 0 to 63"
        ::= { swACLIpRuleEntry 6 }       

    swACLIpRuleProtocol OBJECT-TYPE
        SYNTAX  INTEGER {
               none(1),
               icmp(2),
               igmp(3),
               tcp(4),
               udp(5),
               protocolId(6)
               }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "Specifies the IP protocol which has been configured in swACLIpEntry  ."
        ::= { swACLIpRuleEntry 7 }   

    swACLIpRuleType OBJECT-TYPE
        SYNTAX  INTEGER(0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific that the rule applies to the value of  icmp type traffic."
        ::= { swACLIpRuleEntry 8 }    

    swACLIpRuleCode OBJECT-TYPE
        SYNTAX  INTEGER(0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific that the rule applies to the value of icmp code traffic."
        ::= { swACLIpRuleEntry 9 }    

    swACLIpRuleSrcPort OBJECT-TYPE
        SYNTAX  INTEGER(0..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific that the rule applies the range of tcp/udp source port"
        ::= { swACLIpRuleEntry 10 }    

    swACLIpRuleDstPort OBJECT-TYPE
        SYNTAX  INTEGER(0..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the range of tcp/udp destination port range"
        ::= { swACLIpRuleEntry 11 }    

    swACLIpRuleFlagBits OBJECT-TYPE
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "A value which indicates the set of TCP flags that this
            entity may potentially offers.  The value is a sum.  This
            sum initially takes the value zero, Then, for each flag, L,
            in the range 1 through 6, that this node performs
            transactions for, 2 raised to (L - 1) is added to the sum.
            Note that values should be calculated accordingly:

                 Flag      functionality
                   6        urg bit
                   5        ack bit
                   4        rsh bit
                   3        rst bit
                   2		syn bit
                   1 		fin bit                 
			For example,it you want to enable urg bit and ack bit,you
			should set vlaue 48(2^(5-1) + 2^(6-1))."
        ::= { swACLIpRuleEntry 12 } 

    swACLIpRuleProtoID OBJECT-TYPE
        SYNTAX  INTEGER(0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific that the rule applies to the value of  ip protocol id traffic"
        ::= { swACLIpRuleEntry 13 }    

    swACLIpRuleUserMask OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(4))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific that the rule applies to the ip protocol id and the range of
             options behind the IP header."
        ::= { swACLIpRuleEntry 14 }    
        
    swACLIpRuleEnablePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access will apply only to packets with
             priority value."
        ::= { swACLIpRuleEntry 15 }     
        
    swACLIpRulePriority OBJECT-TYPE
        SYNTAX  INTEGER(0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access profile will apply to packets that contain
              this value in their 802.1p priority field of their header."
        ::= { swACLIpRuleEntry 16 }     
        
    swACLIpRuleReplacePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specific the packets that match the access profile will changed the
             802.1p priority tag field by the switch or not ."
        ::= { swACLIpRuleEntry 17 }  
        
    swACLIpRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Indicate weather the DSCP field can be over-write or not. "
        ::= { swACLIpRuleEntry 18 }  

    swACLIpRuleRepDscp OBJECT-TYPE
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "specify a value to be written to the DSCP field of an incoming packet
             that meets the criteria specified in the first part of the command.
             This value will over-write the value in the DSCP field of the packet."
        ::= { swACLIpRuleEntry 19 } 
        
     --add by ynot
    --swACLIpRulePort OBJECT-TYPE	
     --   SYNTAX  PortList
     --   MAX-ACCESS  read-create
      --  STATUS  current
      --  DESCRIPTION
       --     ""
       -- ::= { swACLIpRuleEntry 20 } 
        
    swACLIpRulePermit OBJECT-TYPE	
        SYNTAX  INTEGER{
        	deny(1),
        	permit(2)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            ""
        ::= { swACLIpRuleEntry 21 }  
        
    swACLIpRuleRowStatus OBJECT-TYPE	
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { swACLIpRuleEntry 22 } 
        
   
        
   
        
--****************************************************************************
--swACLPayloadEntry
--add by ynot 
--****************************************************************************
 swACLPayloadRuleTable  OBJECT-TYPE
 SYNTAX  SEQUENCE OF SwACLPayloadRuleEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            ""
            ::= { swAclRuleMgmt 3 }
      
swACLPayloadRuleEntry OBJECT-TYPE
    SYNTAX  SwACLPayloadRuleEntry
     MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            ""
        INDEX  { swACLPayloadRuleProfileID,swACLPayloadRuleAccessID } 
    ::= { swACLPayloadRuleTable 1 }
            

SwACLPayloadRuleEntry ::= 
        SEQUENCE {
        swACLPayloadRuleProfileID
         	INTEGER,
        swACLPayloadRuleAccessID
        	INTEGER,
         swACLPayloadRuleOffSet0to15
        	OCTET STRING,
        swACLPayloadRuleOffSet16to31
        	OCTET STRING,
        swACLPayloadRuleOffSet32to47
        	OCTET STRING,
        swACLPayloadRuleOffSet48to63
        	OCTET STRING,
        swACLPayloadRuleOffSet64to79
        	OCTET STRING,
       -- swACLRulePayloadPort
       -- 	PortList,
        --swACLRuleOffSet16to19
        --	OCTET STRING,
        --swACLRuleOffSet20to23
        --	OCTET STRING,
       -- swACLRuleOffSet24to27
        --	OCTET STRING,
        --swACLRuleOffSet28to31
        --	OCTET STRING,
       -- swACLRuleOffSet32to35
        --	OCTET STRING,
       -- swACLRuleOffSet36to39
        --	OCTET STRING,
      -- swACLRuleOffSet40to43
       -- 	OCTET STRING,
      --  swACLRuleOffSet44to47
       -- 	OCTET STRING,
      --  swACLRuleOffSet48to51
       -- 	OCTET STRING,
       -- swACLRuleOffSet52to55
       --		 OCTET STRING,
      --  swACLRuleOffSet56to59
       -- 	OCTET STRING,
       -- swACLRuleOffSet60to63
       -- 	OCTET STRING,
       -- swACLRuleOffSet64to67
      --  	OCTET STRING,
      --  swACLRuleOffSet68to71
       --		 OCTET STRING,
       -- swACLRuleOffSet72to75
      --  	OCTET STRING,
      --  swACLRuleOffSet76to79
      --   	OCTET STRING,
		swACLPayloadRuleEnablePriority
            INTEGER,
        swACLPayloadRulePriority
            INTEGER,             
        swACLPayloadRuleReplacePriority
            INTEGER,       
        swACLPayloadRuleEnableReplaceDscp
            INTEGER,                    
        swACLPayloadRuleRepDscp
            INTEGER,
        swACLPayloadRulePermit
        	INTEGER,
        swACLPayloadRuleRowStatus
        	RowStatus
         	 
       }
     
   swACLPayloadRuleProfileID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "The ID of ACL RULE entry ,and is unique in the mask list."
        ::= { swACLPayloadRuleEntry 1 }
         
    swACLPayloadRuleAccessID OBJECT-TYPE
        SYNTAX  INTEGER (1..255)
        MAX-ACCESS  read-only	--read-create
        STATUS  current
        DESCRIPTION
            "th id of the entry "
        ::= { swACLPayloadRuleEntry 2 }      
        
       --swACLRulePayloadPort OBJECT-TYPE
       -- SYNTAX  PortList
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
     --       ""
      -- ::= { swACLPayloadRuleEntry 3 }
       
       swACLPayloadRuleOffSet0to15 OBJECT-TYPE
       SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL rule entry ."
        ::= { swACLPayloadRuleEntry 4 }
        
        swACLPayloadRuleOffSet16to31 OBJECT-TYPE
         SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL rule entry ."
        ::= { swACLPayloadRuleEntry 5 }
        
      swACLPayloadRuleOffSet32to47 OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL rule entry ."
        ::= { swACLPayloadRuleEntry 6 }
     
        
        swACLPayloadRuleOffSet48to63 OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL rule entry ."
        ::= { swACLPayloadRuleEntry 7 }
        
        swACLPayloadRuleOffSet64to79 OBJECT-TYPE
        SYNTAX  OCTET STRING (SIZE(16))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "The offset of ACL rule entry ."
        ::= { swACLPayloadRuleEntry 8 }
        
       -- swACLRuleOffSet36to39 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
      --  STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadRuleEntry 9 }
        
       -- swACLRuleOffSet40to43 OBJECT-TYPE
       -- SYNTAX  OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadRuleEntry 10 }
        
        
        --swACLRuleOffSet44to47 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
       --     ""
       -- ::= { swACLPayloadRuleEntry 11 }
        
        --swACLRuleOffSet48to51 OBJECT-TYPE
       -- SYNTAX  OCTET STRING
       -- MAX-ACCESS  read-create
       -- STATUS  current
       -- DESCRIPTION
      --      ""
       -- ::= { swACLPayloadRuleEntry 12 }
        
       -- swACLRuleOffSet52to55 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
      --  STATUS  current
       -- DESCRIPTION
      --      ""
      --  ::= { swACLPayloadRuleEntry 13 }
        
      --  swACLRuleOffSet56to59 OBJECT-TYPE
      --  SYNTAX   OCTET STRING
      --  MAX-ACCESS  read-create
      --  STATUS  current
      --  DESCRIPTION
      --      ""
      --  ::= { swACLPayloadRuleEntry 14 }
        
      --  swACLRuleOffSet60to63 OBJECT-TYPE
      --  SYNTAX  OCTET STRING
       -- MAX-ACCESS  read-create
      --  STATUS  current
       -- DESCRIPTION
      --      ""
      --  ::= { swACLPayloadRuleEntry 15 }
        
       -- swACLRuleOffSet64to67 OBJECT-TYPE
       -- SYNTAX   OCTET STRING
       -- MAX-ACCESS  read-create
      --  STATUS  current
      --  DESCRIPTION
       --     ""
      --  ::= { swACLPayloadRuleEntry 16 }
        
     --   swACLRuleOffSet68to71 OBJECT-TYPE
     --   SYNTAX   OCTET STRING
      --  MAX-ACCESS  read-create
     --   STATUS  current
     --   DESCRIPTION
     --       ""
     --   ::= { swACLPayloadRuleEntry 17 }
        
     --    swACLRuleOffSet72to75 OBJECT-TYPE
      --  SYNTAX   OCTET STRING
     --   MAX-ACCESS  read-create
     --   STATUS  current
    --    DESCRIPTION
    --        ""
     --   ::= { swACLPayloadRuleEntry 18 }
        
       -- swACLRuleOffSet76to79 OBJECT-TYPE
	--        SYNTAX  OCTET STRING
	--        MAX-ACCESS  read-create
	--        STATUS  current
	--        DESCRIPTION
	 --           ""
	  --      ::= { swACLPayloadRuleEntry 19 } 

	swACLPayloadRuleEnablePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            ""
        ::= { swACLPayloadRuleEntry 9 }     
        
    swACLPayloadRulePriority OBJECT-TYPE
        SYNTAX  INTEGER(0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Specifies that the access profile will apply to packets that contain
              this value in their 802.1p priority field of their header."
        ::= { swACLPayloadRuleEntry 10 }     
        
    swACLPayloadRuleReplacePriority OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            ""
        ::= { swACLPayloadRuleEntry 11 }  
        
    swACLPayloadRuleEnableReplaceDscp OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),
               disabled(2)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "Indicate wether the DSCP field can be over-write or not "
        ::= { swACLPayloadRuleEntry 12 }  

    swACLPayloadRuleRepDscp OBJECT-TYPE
        SYNTAX  INTEGER(0..63)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "specify a value to be written to the DSCP field of an incoming packet
             that meets the criteria specified in the first part of the command.
             This value will over-write the value in the DSCP field of the packet."
        ::= { swACLPayloadRuleEntry 13 }
	        
	swACLPayloadRulePermit OBJECT-TYPE
		SYNTAX INTEGER{
			deny(1),
			permit(2)	
		}
		MAX-ACCESS read-create
		STATUS  current
	        DESCRIPTION
	            "The offset of ACL rule entry ."
	        ::= { swACLPayloadRuleEntry 14 } 
		
        
        
        swACLPayloadRuleRowStatus OBJECT-TYPE
	        SYNTAX	RowStatus	
	        MAX-ACCESS  read-create
	        STATUS  current
	        DESCRIPTION
	            "The status of ACL rule entry ."
	        ::= { swACLPayloadRuleEntry 15 }                     
        
END
