--------------------------------------------------------------------------------

-- --------------------------- Revision ----------------------------------------
-- Date        Version   Author         Chanage Description
--
-- 2010/09/02  5.20.001  D-Link         1.Change version to 5.20.001.
--                                      2.Add FlowBased ACL MIB object.
--
-- 2010/07/23  5.10.001  D-Link         1.Change version to 5.10.001.
--
-- 2010/05/12  5.00.M002 D-Link         1.Remove Serial Port MIB.
--
-- 2010/05/04  5.00.M001 D-Link         1.Change some mib description.
--
-- 2010/04/26  5.00.M000 D-Link         1.Change MIB model name to DES-1210-28.
--                                      2.Change MIBOID to match DES-1210-28 OID.
--
-- 2010/04/01  1.00.003  D-Link         1.Modified MstVlanMstiMappingEntry MIB objects.
--                                      2.Modified swAuthenCtrl MIB objects. 
--                                      3.Removed modeACL in ipMacPortBindingSystemMode.
--                                      4.Add TrapSetting MIB object.
--
-- 2010/03/19  1.00.002  D-Link         1.Change MIBOID to match D-LINK assigned OID.
--                                      2.Change OIDNAME to match D-LINK DES-1228ME.
--
-- 2010/03/10  1.00.001  D-Link         1.Change MIB model name to DES-1228ME
--                                      2.Change MIBOID to match D-LINK assigned OID.
--                                      3.Fix compile fail issue.
--
-- 2010/03/01  1.00.000  D-Link         1.Initial version.
-- 
-- -------------------------- Revision End -------------------------------------

--------------------------------------------------------------------------------

        DES-1210-28_AX DEFINITIONS ::= BEGIN

IMPORTS 
   MODULE-IDENTITY, OBJECT-TYPE, 
   enterprises, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32
                                                  FROM SNMPv2-SMI 
   InetAddress                                    FROM INET-ADDRESS-MIB                                                  
   InterfaceIndex,InterfaceIndexOrZero    
                                                  FROM IF-MIB
   SnmpAdminString,SnmpEngineID,SnmpSecurityLevel FROM SNMP-FRAMEWORK-MIB 
   RowStatus, TruthValue, DisplayString, 
   TEXTUAL-CONVENTION, MacAddress                 FROM SNMPv2-TC; 
        

    d-link						OBJECT IDENTIFIER ::= { enterprises 171 }  
    dlink-products				OBJECT IDENTIFIER ::= { d-link 10 }
    dlink-DES1210SeriesProd	    OBJECT IDENTIFIER ::= { dlink-products 75}
    des-1210-28ax					OBJECT IDENTIFIER ::= { dlink-DES1210SeriesProd 5 }  
   
VlanIndex ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A value used to index per-VLAN tables: values of 0 and
        4095 are not permitted; if the value is between 1 and
        4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with
        global scope within a given bridged domain (see VlanId
        textual convention).  If the value is greater than 4095
        then it represents a VLAN with scope local to the
        particular agent, i.e. one without a global VLAN-ID
        assigned to it. Such VLANs are outside the scope of
        IEEE 802.1Q but it is convenient to be able to manage them
        in the same way using this MIB."
    SYNTAX      Unsigned32

PortList ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "Each octet within this value specifies a set of eight
        ports, with the first octet specifying ports 1 through
        8, the second octet specifying ports 9 through 16, etc.
        Within each octet, the most significant bit represents
        the lowest numbered port, and the least significant bit
        represents the highest numbered port.  Thus, each port
        of the bridge is represented by a single bit within the
        value of this object.  If that bit has a value of '1'
        then that port is included in the set of ports; the port
        is not included if its bit has a value of '0'."
    SYNTAX      OCTET STRING


BridgeId ::= TEXTUAL-CONVENTION
     STATUS  current
     DESCRIPTION
           "The Bridge-Identifier as used in the
           Spanning Tree
           Protocol to uniquely identify a bridge.  Its first two
           octets (in network byte order) contain a priority
           value and its last 6 octets contain the MAC address
           used to refer to a bridge in a unique fashion
           (typically, the numerically smallest MAC address
           of all ports on the bridge).
           Several objects in this MIB module represent values of
           timers used by the Spanning Tree Protocol.  In this
           MIB, these timers have values in units of hundreths of
           a second (i.e. 1/100 secs).
           These timers, when stored in a Spanning Tree Protocol's
           BPDU, are in units of 1/256 seconds.  Note, however,
           that 802.1D-1990 specifies a settable granularity of
           no more than 1 second for these timers.  To avoid
           ambiguity, a data type is defined here as a textual
           convention and all representation of these timers
           in this MIB module are defined using this data type.  An
           algorithm is also defined for converting between the
           different units, to ensure a timer's value is not                                  distorted by multiple conversions."
     SYNTAX          OCTET STRING (SIZE (8))
     
Timeout ::= TEXTUAL-CONVENTION
     DISPLAY-HINT "d4"
     STATUS       current
     DESCRIPTION
           "A STP timer in units of 1/100 seconds
           
            To convert a Timeout value into a value in units of
            1/256 seconds, the following algorithm should be used:
           
                 b  = floor( (n * 256) / 100)
            
            where:
                 floor   =  quotient [ignore remainder]
                 n is the value in 1/100 second units
                 b is the value in 1/256 second units
                                                                                               To convert the value from 1/256 second units back to
            1/100 seconds, the following algorithm should be used:
            
                 n = ceiling( (b * 100) / 256)
            
            where:
                  ceiling =  quotient [if remainder is 0], or
                             quotient + 1 [if remainder is non-zero]
                  n is the value in 1/100 second units
                  b is the value in 1/256 second units
             
             Note: it is important that the arithmetic operations are
             done in the order specified (i.e., multiply first, divide
             second)."
     SYNTAX       INTEGER
     
 OwnerString ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
         "This data type is used to model an administratively
         assigned name of the owner of a resource. Implementations
         must accept values composed of well-formed NVT ASCII
         sequences. In addition, implementations should accept
         values composed of well-formed UTF-8 sequences.

         It is suggested that this name contain one or more of
         the following: IP address, management station name,
         network manager's name, location, or phone number.
         In some cases the agent itself will be the owner of
         an entry.  In these cases, this string shall be set
         to a string starting with 'monitor'.

         SNMP access control is articulated entirely in terms
         of the contents of MIB views; access to a particular
         SNMP object instance depends only upon its presence
         or absence in a particular MIB view and never upon
         its value or the value of related object instances.
         Thus, objects of this type afford resolution of
         resource contention only among cooperating
         managers; they realize no access control function
         with respect to uncooperative parties."
     SYNTAX OCTET STRING (SIZE (0..127))

 RmonStatus ::= TEXTUAL-CONVENTION
     STATUS current
     DESCRIPTION
         "The status of a table entry.

         Setting this object to the value invalid(4) has the
         effect of invalidating the corresponding entry.
         That is, it effectively disassociates the mapping
         identified with said entry.
         It is an implementation-specific matter as to whether
         the agent removes an invalidated entry from the table.
         Accordingly, management stations must be prepared to
         receive tabular information from agents that corresponds
         to entries currently not in use.  Proper
         interpretation of such entries requires examination
         of the relevant RmonStatus object.

         An existing instance of this object cannot be set to
         createRequest(2).  This object may only be set to
         createRequest(2) when this instance is created.  When
         this object is created, the agent may wish to create
         supplemental object instances with default values
         to complete a conceptual row in this table.  Because the

         creation of these default objects is entirely at the option
         of the agent, the manager must not assume that any will be
         created, but may make use of any that are created.
         Immediately after completing the create operation, the agent
         must set this object to underCreation(3).

         When in the underCreation(3) state, an entry is allowed to
         exist in a possibly incomplete, possibly inconsistent state,
         usually to allow it to be modified in multiple PDUs.  When in
         this state, an entry is not fully active.
         Entries shall exist in the underCreation(3) state until
         the management station is finished configuring the entry
         and sets this object to valid(1) or aborts, setting this
         object to invalid(4).  If the agent determines that an
         entry has been in the underCreation(3) state for an
         abnormally long time, it may decide that the management
         station has crashed.  If the agent makes this decision,
         it may set this object to invalid(4) to reclaim the
         entry.  A prudent agent will understand that the
         management station may need to wait for human input
         and will allow for that possibility in its
         determination of this abnormally long period.

         An entry in the valid(1) state is fully configured and
         consistent and fully represents the configuration or
         operation such a row is intended to represent.  For
         example, it could be a statistical function that is
         configured and active, or a filter that is available
         in the list of filters processed by the packet capture
         process.

         A manager is restricted to changing the state of an entry in
         the following ways:

              To:       valid  createRequest  underCreation  invalid
         From:
         valid             OK             NO             OK       OK
         createRequest    N/A            N/A            N/A      N/A
         underCreation     OK             NO             OK       OK
         invalid           NO             NO             NO       OK
         nonExistent       NO             OK             NO       OK

         In the table above, it is not applicable to move the state
         from the createRequest state to any other state because the
         manager will never find the variable in that state.  The
         nonExistent state is not a value of the enumeration, rather
         it means that the entryStatus variable does not exist at all.

         An agent may allow an entryStatus variable to change state in
         additional ways, so long as the semantics of the states are
         followed.  This allowance is made to ease the implementation of
         the agent and is made despite the fact that managers should
         never exercise these additional state transitions."
     SYNTAX INTEGER {
                valid(1),
                createRequest(2),
                underCreation(3),
                invalid(4)
            }     

-- ----------------------------------------------------------------- -- 
-- groups in the MIB  
-- ----------------------------------------------------------------- -- 

        dhcpBOOTPRelayControl                   OBJECT IDENTIFIER ::= { companyDHCPRelay 1 }
      companySystem           OBJECT IDENTIFIER ::= { des-1210-28ax 1 }
            dhcpBOOTPRelayManagementOption82    OBJECT IDENTIFIER ::= { dhcpBOOTPRelayManagement 2 }
        dhcpBOOTPRelayManagement                OBJECT IDENTIFIER ::= { companyDHCPRelay 2 }
      companyIpifGroup            OBJECT IDENTIFIER ::= { des-1210-28ax 2 } 
      companyTftpGroup            OBJECT IDENTIFIER ::= { des-1210-28ax 3 } 
      companyMiscGroup            OBJECT IDENTIFIER ::= { des-1210-28ax 4 }
      companySNMPV3                 OBJECT IDENTIFIER ::= { des-1210-28ax 5 }
      companySTP                 OBJECT IDENTIFIER ::= { des-1210-28ax 6 }
      companyDot1qVlanGroup       OBJECT IDENTIFIER ::= { des-1210-28ax 7 }      
      companyLA                   OBJECT IDENTIFIER ::= { des-1210-28ax 8 }
      companyStaticMAC   	      OBJECT IDENTIFIER ::= { des-1210-28ax 9 }          
      companyIgsGroup             OBJECT IDENTIFIER ::= { des-1210-28ax 10 }
      companyGVRPGroup       OBJECT IDENTIFIER ::= { des-1210-28ax 11 }
      companyQoSGroup             OBJECT IDENTIFIER ::= { des-1210-28ax 12 }
      companyTrafficMgmt          OBJECT IDENTIFIER ::= { des-1210-28ax 13 }
      companySecurity             OBJECT IDENTIFIER ::= { des-1210-28ax 14 }
      companyACLGroup             OBJECT IDENTIFIER ::= { des-1210-28ax 15 }
      companySyslog               OBJECT IDENTIFIER ::= { des-1210-28ax 16 } 
	  companyLBD                  OBJECT IDENTIFIER ::= { des-1210-28ax 17 }        
      companyMirror             OBJECT IDENTIFIER ::= { des-1210-28ax 18 }
      companyStaticMcast           OBJECT IDENTIFIER ::= { des-1210-28ax 19 }
      companySNTPSetting          OBJECT IDENTIFIER ::= { des-1210-28ax 20 }
      companyVoiceVlan                   OBJECT IDENTIFIER ::= { des-1210-28ax 21 }
      companyRMON                 OBJECT IDENTIFIER ::= { des-1210-28ax 22 }
      companyAuthGroup           OBJECT IDENTIFIER ::= { des-1210-28ax 23 }
      companyGuestVlan                   OBJECT IDENTIFIER ::= { des-1210-28ax 24 }
      companyMacNotify                   OBJECT IDENTIFIER ::= { des-1210-28ax 25 }
      companySMTP                   OBJECT IDENTIFIER ::= { des-1210-28ax 26 }
      companyISMVLAN          OBJECT IDENTIFIER ::= { des-1210-28ax 27 }
    companyDHCPRelay                            OBJECT IDENTIFIER ::= { des-1210-28ax 28 }
    companyDHCPLocalRelay   OBJECT IDENTIFIER ::= { des-1210-28ax 29 }
      companyTrapSetting	      OBJECT IDENTIFIER ::= { des-1210-28ax 30 }
      companyLLDPSetting	      OBJECT IDENTIFIER ::= { des-1210-28ax 32 }
      companyCPUInterfaceFilterGroup             OBJECT IDENTIFIER ::= { des-1210-28ax 33 }
      
-- ---------------------------------------------------------------- --

    -- ------------------------------------------------------------------
    -- companySystem
    -- ------------------------------------------------------------------

    sysSwitchName OBJECT-TYPE
       SYNTAX      DisplayString (SIZE(1..20))
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "System name used for identification of the device.
          The following characters are allowed to input.
          0 ~ 9 / a ~ z / A ~ Z
          Special character: (  )   V  +  _  =  ."
       ::= { companySystem 1 }

    sysHardwareVersion OBJECT-TYPE
       SYNTAX      DisplayString (SIZE(1..15))
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
          "Version number of the Hardware."
          DEFVAL { "" }
       ::= { companySystem 2 }

    sysFirmwareVersion OBJECT-TYPE
       SYNTAX      DisplayString (SIZE(1..15))
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
          "Version number of the Firmware."
          DEFVAL { "" }
       ::= { companySystem 3 }

    sysLoginTimeoutInterval  OBJECT-TYPE
       SYNTAX      Integer32 (3..30)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "This time interval is used to count the time and
           logout web interface automatically."
           DEFVAL  { 5 }
       ::= { companySystem 4 }

    sysLocationName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(1..20))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
                "The location name of this node (e.g., `telephone closet,
                 3rd floor').  If the location is unknown, the value is
                 the zero-length string."
       ::= { companySystem 5 }


    sysGroupInterval OBJECT-TYPE
       SYNTAX      Integer32 (0 | 120..1225)
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Group Interval is used to send D-link Discover packet to D-link
           SmartConsole Utility frequency.

           The timer in units of seconds.

           Set value 0 to disable group Interval."
       ::= { companySystem 6 }


    sysSafeGuardEnable  OBJECT-TYPE
       SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "This object is used to set Safeguard Enable\Disable."
          DEFVAL { enable }
       ::= { companySystem 8 }


    sysRestart OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "This object allows the user to restart the Switch
          (i.e)the entire switch will operationally go down and
           start again.  Setting  a value of 'true' causes the switch
           to be restarted.

           When  the switch operationally goes down, configuration
           save operation is initiated based on the configuration save
           option chosen.

           When the switch operationally come up, the saved configurations
           are restored based on the restore option chosen.

           Once the switch is restarted, the value of this object reverts
           to 'false'."
       DEFVAL  { false }
       ::= { companySystem 9 }

    sysSave OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "This object is used to save Configuration."
       DEFVAL  { false }
       ::= { companySystem 10 }



    -- Port Control Table

        sysPortCtrlTable OBJECT-TYPE
           SYNTAX      SEQUENCE OF SysPortCtrlEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
               "A table to control the port specific parameters of the device like speed,
                duplex mode, etc."
           ::= { companySystem 13 }

        sysPortCtrlEntry OBJECT-TYPE
           SYNTAX      SysPortCtrlEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
               "An entry appears in this table for each interface in the system.

               Index to the table is the interface index of the port."

           INDEX { sysPortCtrlIndex , sysPortCtrlMediumType}
           ::= { sysPortCtrlTable 1 }

        SysPortCtrlEntry ::=
           SEQUENCE {
              sysPortCtrlIndex
                 Integer32,
              sysPortCtrlMediumType
                 INTEGER,
              sysPortCtrlSpeed
                 INTEGER,
              sysPortCtrlOperStatus
                 INTEGER,
              sysPortCtrlMDI
                 INTEGER,
              sysPortCtrlFlowControl
                 INTEGER,
              sysPortCtrlFlowControlOper
                 INTEGER,
              sysPortCtrlType
                 INTEGER
          }

        sysPortCtrlIndex OBJECT-TYPE
           SYNTAX      Integer32 (1..65535)
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "Interface index of the port for the configuration
              in this entry applies."

           ::= { sysPortCtrlEntry 1 }

        sysPortCtrlMediumType OBJECT-TYPE
           SYNTAX      INTEGER {
             copper(100),
             fiber1G(101),
             fiber100M(102)
           }
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "This object indicates the port type: fiber 1G/100M or copper."

           ::= { sysPortCtrlEntry 2 }

        sysPortCtrlSpeed OBJECT-TYPE
           SYNTAX      INTEGER {
                         rate1000M-Full  (1),
                         rate100M-Full   (2),
                         rate100M-Half   (3),
                         rate10M-Full    (4),
                         rate10M-Half    (5),
                         auto            (6),
                         disable         (7)
                      }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Configures interface speed."

           ::= { sysPortCtrlEntry 3 }

        sysPortCtrlOperStatus OBJECT-TYPE
           SYNTAX      INTEGER {
                         down            (1),
                         rate1000M-Full  (2),
                         rate100M-Full   (3),
                         rate100M-Half   (4),
                         rate10M-Full    (5),
                         rate10M-Half    (6)
                      }
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The port's operating speed state."

           ::= { sysPortCtrlEntry 4 }

        sysPortCtrlMDI OBJECT-TYPE
           SYNTAX      INTEGER {
                         auto    (1),
                         mdi     (2),
                         mdix    (3)
                      }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Configures interface auto/mdi/mdix mode.
              The default setting is Auto."

           ::= { sysPortCtrlEntry 5 }

        sysPortCtrlFlowControl OBJECT-TYPE
           SYNTAX      INTEGER {
                         enable     (1),
                         disable    (2)
                      }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Enables / disables flow control for the interface."

           ::= { sysPortCtrlEntry 6 }

        sysPortCtrlFlowControlOper OBJECT-TYPE
            SYNTAX INTEGER {
                   enabled(1),
                   disabled(2)
            }
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The link parner negotiate port's operating flow control state."
            ::= { sysPortCtrlEntry 7 }

        sysPortCtrlType OBJECT-TYPE
            SYNTAX INTEGER {
                   fastethernet(1),
                   gigabitethernet(2),
                   fiberwith100BaseSFPModule(3),
                   fiberwith1000BaseSFPModule(4)
            }
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The port's media type."
            ::= { sysPortCtrlEntry 8 }

-- start DLINK_METRO_LIKE_GENERAL
        sysPortDescriptionTable OBJECT-TYPE
           SYNTAX      SEQUENCE OF SysPortDescriptionEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
               "The port description table."
           ::= { companySystem 14 }

        sysPortDescriptionEntry OBJECT-TYPE
           SYNTAX      SysPortDescriptionEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
               "The port description entry."
           INDEX { sysPortDescIndex, sysPortDescMediumType }
           ::= { sysPortDescriptionTable 1 }

        SysPortDescriptionEntry ::=
           SEQUENCE {
              sysPortDescIndex
                 INTEGER,
              sysPortDescMediumType
                 INTEGER,
              sysPortDescString
                 DisplayString
           }

        sysPortDescIndex OBJECT-TYPE
           SYNTAX      INTEGER (1..255)
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "This object indicates the port index."
           ::= { sysPortDescriptionEntry 1 }
              
              
        sysPortDescMediumType OBJECT-TYPE
           SYNTAX      INTEGER {
             copper(100),
             fiber1G(101),
             fiber100M(102)
           }
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "This object indicates the port type: fiber 1G/100M or copper."
           ::= { sysPortDescriptionEntry 2 }
           
        sysPortDescString OBJECT-TYPE
           SYNTAX       DisplayString(SIZE(0..32))
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "This object indicates the port description."
           ::= { sysPortDescriptionEntry 3 }
-- end DLINK_METRO_LIKE_GENERAL

-- start DLINK_METRO_LIKE_GENERAL
		sysPortErrTable OBJECT-TYPE
		   SYNTAX       SEQUENCE OF SysPortErrEntry
		   MAX-ACCESS   not-accessible
		   STATUS       current
		   DESCRIPTION
		   	   "The port error table."
           ::= { companySystem 15 }

		sysPortErrEntry OBJECT-TYPE
		   SYNTAX       SysPortErrEntry
		   MAX-ACCESS   not-accessible
		   STATUS       current
		   DESCRIPTION
		        "A list of information for the err port of the device."
		   INDEX { sysPortErrPortIndex }
		    ::= { sysPortErrTable 1 }

		SysPortErrEntry ::= 
		   SEQUENCE {
		      sysPortErrPortIndex
		         INTEGER,
		      sysPortErrPortState
		         INTEGER,
		      sysPortErrPortStatus 
		         INTEGER,
		      sysPortErrPortReason
		         INTEGER
		}

		sysPortErrPortIndex OBJECT-TYPE
		   SYNTAX       INTEGER (1..255)
		   MAX-ACCESS   read-only
		   STATUS       current
		   DESCRIPTION
		        "This object indicates the module's port number.(1..Max port number in
		        the module)"
		   ::= { sysPortErrEntry 1 }
       
		sysPortErrPortState OBJECT-TYPE
		   SYNTAX       INTEGER {
		      disabled(1),
		      enabled(2)
		   }
		   MAX-ACCESS   read-only
		   STATUS       current
		   DESCRIPTION
		        "This object decides whether the port state is enabled or disabled."
		   ::= { sysPortErrEntry 2 }
		
		sysPortErrPortStatus OBJECT-TYPE
		   SYNTAX       INTEGER {
		      other(1),
		      err-disabled(2)
		   }
		   MAX-ACCESS   read-only
		   STATUS       current
		   DESCRIPTION
		        "This object decides whether the PortStatus is err-disabled."
		   ::= { sysPortErrEntry 3 }
		
		sysPortErrPortReason OBJECT-TYPE
		   SYNTAX       INTEGER {
		      lbd(1)
		   }
		   MAX-ACCESS   read-only
		   STATUS       current
		   DESCRIPTION
		        "This object decides whether the PortStatus is LBD."
		   ::= { sysPortErrEntry 4 }
-- end DLINK_METRO_LIKE_GENERAL

        sysDhcpAutoConfiguration  OBJECT-TYPE
            SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
            }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
            "This object indicates auto config is enabled or disabled."
            DEFVAL { disable }
            ::= { companySystem 16 }

-- start DLINK_METRO_LIKE_GENERAL

		   sysWebState  OBJECT-TYPE
		   SYNTAX       INTEGER {
		                enabled(1),
		                disabled(2)
		               }
		   MAX-ACCESS  read-write
		   STATUS      current
		   DESCRIPTION
		      "This object is for Enabled(1) or Disabled(2) Web state in the system."
		   ::= { companySystem 17 }


		   sysWebPortNumber  OBJECT-TYPE
		   SYNTAX      Integer32 (1..65535)
		   MAX-ACCESS  read-write
		   STATUS      current
		   DESCRIPTION
		       "Web Server Port Number." 
		   DEFVAL  { 80 }		   
		   ::= { companySystem 18 }

           sysARPAgingTime  OBJECT-TYPE
		   SYNTAX      INTEGER (0..65535)
		   MAX-ACCESS  read-write
		   STATUS      current
		   DESCRIPTION
		       "This object is for ARP aging time."
		   ::= { companySystem 19 }


           sysMACAgingTime  OBJECT-TYPE
		   SYNTAX      INTEGER (10..600)
		   MAX-ACCESS  read-write
		   STATUS      current
		   DESCRIPTION
		       "This object is for MAC aging time."
		   ::= { companySystem 20 }


            telnetsettingManagementOnOff OBJECT-TYPE
            SYNTAX INTEGER {
                   enabled(1),
                   disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Enable/Disable management Telnetsetting mechanism."
            ::= { companySystem 23 }

            telnetUDPPort OBJECT-TYPE
            SYNTAX  INTEGER (1..65535)
            MAX-ACCESS  read-write
            STATUS  current
            DESCRIPTION
                "The value is for setting telnet's UDP Port." 
            DEFVAL  { 23 }
            ::= { companySystem 24 } 

        autoRefreshConfiguration  OBJECT-TYPE
            SYNTAX      INTEGER {
                    refreshimenever(0),
                    refreshtime10secs(1),
                    refreshtime30secs(2),
                    refreshtime1min(3),
                    refreshtime5mins(4)
            }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
            "To set the WEB panel auto refresh timer."
            ::= { companySystem 25 }
-- end DLINK_METRO_LIKE_GENERAL


        -- -------------------------------------------------------------------------
        -- companyIpifGroup       
        -- -------------------------------------------------------------------------
       
       sysIpAddrCfgMode OBJECT-TYPE 
       SYNTAX      INTEGER {
                    manual(1),
                    dynamic(2)
                   }
       MAX-ACCESS  read-write 
       STATUS      current 
       DESCRIPTION 
          "Specifies the means by which the default interface in the device 

      gets the IP address.

      If 'manual' mode is selected, the default interface takes the 
      'sysDefaultIpAddr' configured in the system.

      If 'dynamic' mode is selected, the default interface gets the IP address
      through dynamic IP address configuration protocols such as RARP client, 
      BootP client, DHCP Client, etc.
      
      If the system fails to get the IP address dynamically through all the
      above protocols, the default interface uses the 'sysDefaultIpAddr' 
      configured in the system."  
       DEFVAL  { manual } 
       ::= { companyIpifGroup 1 }

    sysIpAddr  OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION 
          "Default IP Address of the system.
    
           This IP address, if modified, will take effect only when the 
           configuration is stored & restored."
       ::= { companyIpifGroup 2 }
    
    sysIpSubnetMask  OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION 
          "IP subnet mask for the default IP address.
    
           This subnet mask, if modified, will take effect only when the
           configuration is stored & restored."
       ::= { companyIpifGroup 3 }

    sysGateway  OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION 
          "Gateway"
       ::= { companyIpifGroup 4 }

    dhcpOption12Status  OBJECT-TYPE
       SYNTAX      INTEGER {
                    enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION 
          "Status of DHCP Option12"
       ::= { companyIpifGroup 5 }
       
    dhcpOption12HostName  OBJECT-TYPE
       SYNTAX      OCTET STRING
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION 
          "Host name in DHCP option 12"
       ::= { companyIpifGroup 6 }

        -- -------------------------------------------------------------------------
        -- companyTftpGroup         
        -- -------------------------------------------------------------------------
        tftpFwServerIpAddress OBJECT-TYPE
              SYNTAX IpAddress
              MAX-ACCESS read-write
              STATUS current
              DESCRIPTION
                  "The TFTP server's IP address is used to upload or
  		           download firmware."
              ::= { companyTftpGroup 1 }
 

        tftpFwImageFileName OBJECT-TYPE
             SYNTAX DisplayString (SIZE(1..64))
             MAX-ACCESS read-write
             STATUS current
             DESCRIPTION
                 "Configure firmware filename to download."
             ::= { companyTftpGroup 2 }

        tftpFwTftpOperation OBJECT-TYPE
             SYNTAX INTEGER {
                    none(0),
                    download(1),
                    upload(2)
             }
             MAX-ACCESS read-write
             STATUS current
             DESCRIPTION
                 "The tftp operates to perform downloading the firmware image
                 to the unit. This object is used in conjunction with
 		         configBootTftpServerIp and configBootImageFileName."
             ::= { companyTftpGroup 3 }

        tftpFwTftpOperationStatus OBJECT-TYPE
             SYNTAX INTEGER {
                    none(0),
                    success(1),
                    fail(2),
                    progressing(3),
                    transmit(4)
             }
             MAX-ACCESS read-only
             STATUS current
             DESCRIPTION
                 "The tftp operation status represent firmware backup or upgrade status."
             ::= { companyTftpGroup 4 }
         
         tftpCfgServerIpAddress OBJECT-TYPE
              SYNTAX IpAddress
              MAX-ACCESS read-write
              STATUS current
              DESCRIPTION
                  "The TFTP server's IP address is used to upload or
  		           download configuration file."
              ::= { companyTftpGroup 5 }
                
         tftpConfigFileName OBJECT-TYPE
              SYNTAX DisplayString (SIZE(1..64))
              MAX-ACCESS read-write
              STATUS current
              DESCRIPTION
                  "The configuration filename is used to store or retrieve config 
                   from the tftp server."
              ::= { companyTftpGroup 6 }
  
         tftpConfigTftpOperation OBJECT-TYPE
              SYNTAX INTEGER {
                     download(1),
                     upload(2),
                     progressing(3)
              }
              MAX-ACCESS read-write
              STATUS current
              DESCRIPTION
                  "The tftp operates to perform either downloading the 
  		           configuration file to the unit or uploading the current
  		           configuration file to the tftp server. This object is 
  		           used in conjunction with configTftpServerIpAddress
  		           and configTftpServerFileName."
              ::= { companyTftpGroup 7 }

        tftpConfigTftpOperationStatus OBJECT-TYPE
             SYNTAX INTEGER {
                    none(0),
                    success(1),
                    fail(2),
                    progressing(3)
             }
             MAX-ACCESS read-only
             STATUS current
             DESCRIPTION
                 "The tftp operation status represent configuration file backup or restore status."
             ::= { companyTftpGroup 8 }

        -- -------------------------------------------------------------------------
        -- company Extension MIB, Miscellaneous Information         
        -- -------------------------------------------------------------------------

        miscReset OBJECT-TYPE
            SYNTAX INTEGER {
                   reset(1),
                   noop(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Physically resets the unit - use with care. A (1) resets 
                 the unit, a (2) does nothing."
            ::= { companyMiscGroup 2 }

        miscStatisticsReset OBJECT-TYPE
            SYNTAX INTEGER {
                   reset(1),
                   noop(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Resets the units statistics. A (1) resets 
                 the statistics count, a (2) does nothing."
            ::= { companyMiscGroup 3 }
        -- ----------------------------------------------------------------
        -- The STP Bridge Global
        -- ----------------------------------------------------------------
        stpBridgeGlobal  OBJECT IDENTIFIER ::= { companySTP 1 }
        
        stpModuleStatus OBJECT-TYPE
           SYNTAX   INTEGER { 
                        enabled(1), 
                        disabled(2) 
                    }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The administrative status requested by management for the MST  
              feature. The value enabled(1) indicates that Mst should be enabled  
              in the device on all ports. The value disabled(2) indicates that 
              Mst should be disabled in the device on all ports. The object can 
              be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
           ::= { stpBridgeGlobal 1 }
           
        stpProtocolVersion OBJECT-TYPE
           SYNTAX      INTEGER {
                          stp(0),
                          rstp(2),
                          mstp(3)
                       }
           MAX-ACCESS  read-write 
           STATUS      current
           DESCRIPTION
              "The version of Spanning Tree Protocol the bridge is
        	   currently running.  The value 'stpCompatible(0)'
        	   indicates the Spanning Tree Protocol specified in
        	   IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
        	   Tree Protocol specified in IEEE 802.1w and 'mstp(3)'
        	   indicates the Multiple Spanning Tree Protocol Specified
        	   in IEEE 802.1s." 
           DEFVAL { mstp }
           ::= { stpBridgeGlobal 2 }
           
        stpBridgePriority OBJECT-TYPE
           SYNTAX      Integer32 (0..61440) 
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The Value of the writable portion of the Bridge
               Identifier comprising of the first two octets.
               The values that are set for Bridge Priority must be 
               in steps of 4096."
           DEFVAL {32768}
           ::= { stpBridgeGlobal 3 }          

        stpTxHoldCount OBJECT-TYPE
            SYNTAX      Integer32 (1..10)
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
               "The value used by the Port Transmit state machine to limit
                the maximum transmission rate."
            DEFVAL  { 3 }
            ::= { stpBridgeGlobal 4 }

        stpBridgeMaxAge OBJECT-TYPE
            SYNTAX      Timeout (600..4000)  
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
               "The value that all bridges use for MaxAge when
                this bridge is acting as the root. The granularity 
                of this timer is specified to be 1 second.
                An agent may return a badValue error if a set is
                attempted to a value which is not a whole number
                of seconds."
            DEFVAL {2000}
            ::= { stpBridgeGlobal 5 }
        
        stpBridgeHelloTime OBJECT-TYPE
           SYNTAX      Timeout (100..1000)  
           MAX-ACCESS  read-write  
           STATUS      current
           DESCRIPTION
               "The amount of time between the transmission of
               Configuration bridge PDUs by this node in units 
               of hundredths of a second."
           ::= { stpBridgeGlobal 6 }

        stpBridgeForwardDelay OBJECT-TYPE
           SYNTAX      Timeout (400..3000)  
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
                "The value that all bridges use for ForwardDelay
                 when this bridge is acting as the root.  Note that
                 802.1D specifies that the range for this
                 parameter is related to the value of
                 BridgeMaxAge.  The granularity of this
                 timer is specified to be 1 second.
                 An agent may return a badValue error if a set is
                 attempted to a value which is not a whole number
                 of seconds."
           DEFVAL {1500}
           ::= { stpBridgeGlobal 7 }
        stpFowardBPDU OBJECT-TYPE
           SYNTAX   INTEGER { 
                        enabled(1), 
                        disabled(2) 
                    }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "This object is for enabling or disabling forward BPDU."
           ::= {stpBridgeGlobal 8 }   

        stpRootBridge  OBJECT-TYPE
           SYNTAX      BridgeId  
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                "The bridge identifier of the Root of the common spanning
                 tree as determined by the Spanning Tree Protocol
                 as executed by this node.  This value is used as
                 the CIST Root Identifier parameter in all Configuration
                 Bridge PDUs originated by this node."
           ::= { stpBridgeGlobal 9 }
           
        stpRootCost OBJECT-TYPE
           SYNTAX      Integer32 
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
                "The Cost of the path to the CIST Root as seen 
                from this bridge."
           ::= { stpBridgeGlobal 10 }
           
        stpMaxAge OBJECT-TYPE
           SYNTAX      Timeout
           MAX-ACCESS  read-only  
           STATUS      current
           DESCRIPTION
                 "The maximum age of Spanning Tree Protocol
                  information learned from the network on any port
                  before it is discarded, in units of hundredths of
                  a second.  This is the actual value that this
                  bridge is currently using."
           ::= { stpBridgeGlobal 11 }
           
        stpForwardDelay OBJECT-TYPE
           SYNTAX      Timeout
           MAX-ACCESS  read-only  
           STATUS      current
           DESCRIPTION
           	  "This time value, measured in units of hundredths
        	   of a second, controls how fast a port changes its
        	   spanning state when moving towards the Forwarding
        	   state.  The value determines how long the port
        	   stays in a particular state before moving to the
        	   next state."
           ::= { stpBridgeGlobal 12 }
           
        stpRootPort OBJECT-TYPE
           SYNTAX      Integer32  
           MAX-ACCESS  read-only      
           STATUS      current 
           DESCRIPTION 
              "The Port Number of the Port which offers the lowest    
               path cost from this bridge to the CIST Root Bridge."
           ::= { stpBridgeGlobal 13 }      
           
     -- -------------------------------------
     -- The Spanning Tree Port Table   
     -- -------------------------------------
             
        stpPortTable OBJECT-TYPE
           SYNTAX  SEQUENCE OF StpPortEntry
           MAX-ACCESS  not-accessible
           STATUS  current
           DESCRIPTION
             "A table that contains port-specific information
             for the Spanning Tree Protocol."
           ::= { companySTP 2 }
        
        stpPortEntry OBJECT-TYPE
           SYNTAX  StpPortEntry
           MAX-ACCESS  not-accessible
           STATUS  current
           DESCRIPTION
             "A list of information maintained by every port
             about the Spanning Tree Protocol state for that
             port."
           INDEX   { stpPort }
           ::= { stpPortTable 1 }

        StpPortEntry ::=
           SEQUENCE {
                  stpPort
                     INTEGER,
                  stpPortStatus
                     INTEGER,                     
                  stpPortPriority
                     INTEGER,
                  stpAdminPortPathCost
                     INTEGER,
                  stpPortPathCost
                     INTEGER,
                  stpPortProtocolMigration
                     TruthValue,
                  stpPortEdge
                     INTEGER,
                  stpPortAdminP2P
                     INTEGER,
                  stpPortRestrictedRole 
                     TruthValue, 
                  stpPortRestrictedTCN
                     TruthValue,
                  stpPortHelloTime
                     Timeout,
                  stpPortState
                     INTEGER,
                  stpPortFowardBPDU
                     INTEGER
        }

        stpPort OBJECT-TYPE
           SYNTAX      INTEGER (1..65535)
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The Port number of the port for which this entry contains   
               spanning tree information."                                      
           ::= { stpPortEntry 1 }
           
        stpPortStatus OBJECT-TYPE
          SYNTAX      INTEGER {
                       enabled(1),
                       disabled(0)
                      }
          MAX-ACCESS  read-write           
          STATUS      current
          DESCRIPTION
              "Current state of the Port which can be changed to either 
               Disabled or Enabled for ALL spanning tree   
               instances. Setting this object will override the port's
               status in any of the MSTI contexts"                                        
          ::= { stpPortEntry 2 }
          
        stpPortPriority OBJECT-TYPE
           SYNTAX      INTEGER (0..240)
           MAX-ACCESS  read-write           
           STATUS      current
           DESCRIPTION
              "The four most significant bits of the Port Identifier 
              of the Spanning Tree instance can be modified by setting 
              the CistPortPriority value. The values that are set for Port 
              Priority must be in steps of 16."
           DEFVAL {128}
           ::= { stpPortEntry 3 }

        stpAdminPortPathCost OBJECT-TYPE
           SYNTAX  INTEGER (0..200000000)
           MAX-ACCESS  read-write
           STATUS  current
           DESCRIPTION
             "The contribution of this port to the path cost of
             paths towards the spanning tree root which include
             this port.  Writing a value of '0' assigns the 
             automatically calculated default Path Cost value to 
             the ohter object stpPortPathCost. If the default 
             Path Cost is being used,this object returns '0' when 
             read."
           REFERENCE
             "IEEE 802.1D-2004"
           ::= { stpPortEntry 4 }
           
        stpPortPathCost OBJECT-TYPE
           SYNTAX      INTEGER (1..200000000)
           MAX-ACCESS  read-write           
           STATUS      current
           DESCRIPTION
                "The contribution of this port to the path cost of
                 paths towards the CIST Root which include this port."
           ::= { stpPortEntry 5 }
           
        stpPortProtocolMigration OBJECT-TYPE
           SYNTAX      TruthValue                
           MAX-ACCESS  read-write           
           STATUS      current
           DESCRIPTION
              "Indicates the Protocol migration state of this Port.         
               When operating in RSTP/MSTP (version >= 2) mode, writing 
               TRUE(1) to this object forces this port to transmit MSTP 
               BPDUs without instance information.
               Any other operation on this object has no effect and
               it always returns FALSE(2) when read."
           ::= { stpPortEntry 6 }
        
        stpPortEdge OBJECT-TYPE
            SYNTAX      INTEGER {
                           true(1),
                           false(0),
                           auto(2)
                       }
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                " This parameter when TRUE(1) indicates that detection of a port 
                 as Edge Port happens automatically and FALSE(2) 
                 indicates that this feature is disabled."
           ::= { stpPortEntry 7 }
        
        stpPortAdminP2P OBJECT-TYPE
           SYNTAX      INTEGER {               
                         forceTrue(0),
                         forceFalse(1),
                         auto(2)
                       }
           MAX-ACCESS  read-write           
           STATUS      current
           DESCRIPTION
              "The administrative point-to-point status of the LAN segment
               attached to this port.  A value of forceTrue(0) indicates that
               this port should always be treated as if it is connected to
               a point-to-point link.  A value of forceFalse(1) indicates
               that this port should be treated as having a shared media
               connection.  A value of auto(2) indicates that this port is
               considered to have a point-to-point link if it is an Aggregator
               and all of its members are aggregatable, or if the MAC entity
               is configured for full duplex operation, either through
               auto-negotiation or by management means."
           ::= { stpPortEntry 8 }
        
        stpPortRestrictedRole OBJECT-TYPE 
            SYNTAX      TruthValue 
            MAX-ACCESS  read-write 
            STATUS      current 
            DESCRIPTION 
                "A Boolean value set by management. If TRUE causes the Port not 
                 to be selected as Root Port for the CIST or any MSTI, even it has 
                 the best spanning tree priority vector. Such a Port will be selected 
                 as an Alternate Port after the Root Port has been selected. This 
                 parameter should be FALSE by default. If set it can cause lack of 
                 spanning tree connectivity. It is set by a network administrator to 
                 prevent bridges external to a core region of the network influencing 
                 the spanning tree active topology, possibly because those bridges are 
                 not under the full control of the administrator.
                 This administrator configuration is also known as 'Root Guard'."
            ::= {stpPortEntry 9}
  
        stpPortRestrictedTCN OBJECT-TYPE 
            SYNTAX      TruthValue 
            MAX-ACCESS  read-write 
            STATUS      current 
            DESCRIPTION 
                "A Boolean value set by management. If TRUE causes the Port not 
                 to propagate received topology change notifications and topology 
                 changes to other Ports. This parameter should be FALSE by default. 
                 If set it can cause temporary loss of connectivity after changes in 
                 a spanning trees active topology as a result of persistent 
                 incorrectly learnt station location information. It is set by a 
                 network administrator to prevent bridges external to a core region of 
                 the network causing address flushing in that region, possibly because 
                 those bridges are not under the full control of the administrator or 
                 MAC_Operational for the attached LANs transitions frequently." 
            ::= {stpPortEntry 10}
           
        stpPortHelloTime OBJECT-TYPE
           SYNTAX      Timeout (100..1000)  
           MAX-ACCESS  read-write  
           STATUS      current
           DESCRIPTION
               "The amount of time between the transmission of
               Configuration bridge PDUs by this node in units 
               of hundredths of a second."
           ::= { stpPortEntry 11 }
            
        stpPortState OBJECT-TYPE
             SYNTAX    INTEGER {              
                         disabled (1),
                         discarding (2),
                         learning (4),
                         forwarding (5)
                       }
             MAX-ACCESS  read-only            
             STATUS      current
             DESCRIPTION
                 "Current state of the Port as defined by the Common    
                  spanning tree protocol." 
           ::= { stpPortEntry 12 }
            
        stpPortFowardBPDU OBJECT-TYPE
           SYNTAX  INTEGER {
                       enabled(1),
                       disabled(2)
                   }
           MAX-ACCESS  read-write
           STATUS  current
           DESCRIPTION
             "This object is for enabling or disabling forward BPDU."
           REFERENCE
             "IEEE 802.1D-2004"
           ::= { stpPortEntry 13 }

        -- ----------------------------------------------------------------
        -- The MST Configuration Identification
        -- ----------------------------------------------------------------
        mstConfigurationIdentification  OBJECT IDENTIFIER ::= { companySTP 3 }
        
        mstiConfigurationName OBJECT-TYPE
           SYNTAX      OCTET STRING (SIZE (0..32))
           MAX-ACCESS  read-write 
           STATUS      current
           DESCRIPTION
              "The Name for the Region's configuration. By Default 
               Region Name will be equal to the Bridge Mac Address."
           ::= { mstConfigurationIdentification 1 } 
        
        mstiRevisionLevel OBJECT-TYPE
           SYNTAX      Integer32 (0..65535)
           MAX-ACCESS  read-write 
           STATUS      current
           DESCRIPTION
              "Version of the MST Region."
           ::= { mstConfigurationIdentification 2 }
           
        -- -----------------------------------------------------------------
        -- Future Mst VlanId to Instance Mapping Table : CIST             
        -- -----------------------------------------------------------------
        mstCistVlanMapped OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN. The
                    first octet corresponds to VLANs with VlanIndex values
                    1 through 8; the second octet to VLANs 9 through
                    16 etc.  The most significant bit of each octet
                    corresponds to the lowest VlanIndex value in that octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'."
            ::= { mstConfigurationIdentification 3 }
        
        mstCistVlanMapped2k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 1024 through 2047. The
                    first octet corresponds to VLANs with VlanIndex values
                    1024 through 1031; the second octet to VLANs 1032
                    through 1039 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
                    
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstConfigurationIdentification 4 }
        
        mstCistVlanMapped3k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 2048 through 3071. The
                    first octet corresponds to VLANs with VlanIndex values
                    of 2048 through 2055; the second octet to VLANs 2056
                    through 2063 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
        
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstConfigurationIdentification 5 }
        
        mstCistVlanMapped4k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 3072 through 4095. The
                    first octet corresponds to VLANs with VlanIndex values
                    3072 through 3079; the second octet to VLANs 3080
                    through 3087 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
        
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstConfigurationIdentification 6 }
        
        -- -----------------------------------------------------------------
        -- Future Mst VlanId to Instance Mapping Table : MSTI             
        -- -----------------------------------------------------------------        
        mstVlanMstiMappingTable OBJECT-TYPE
            SYNTAX      SEQUENCE OF MstVlanMstiMappingEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                  "This table contains one entry for each instance of MSTP. 
        	       This table maintains context ID as one more index to 
        	       support Multiple Instances." 
            ::= { mstConfigurationIdentification 7 }
        
        mstVlanMstiMappingEntry OBJECT-TYPE
             SYNTAX      MstVlanMstiMappingEntry
             MAX-ACCESS  not-accessible
             STATUS      current
             DESCRIPTION
                 "A conceptual row containing the status of the MSTP instance."
                  INDEX  { mstInstanceIndex }
             ::= { mstVlanMstiMappingTable 1 }
        
        MstVlanMstiMappingEntry ::= 
           SEQUENCE {
               mstInstanceIndex  
                    Integer32,
               mstSetVlanList 
                    OCTET STRING,
               mstResetVlanList 
                    OCTET STRING,
               mstInstanceVlanMapped 
                    OCTET STRING,
               mstInstanceVlanMapped2k 
                    OCTET STRING,
               mstInstanceVlanMapped3k 
                    OCTET STRING,
               mstInstanceVlanMapped4k 
                    OCTET STRING
           }
        
        mstInstanceIndex OBJECT-TYPE
              SYNTAX      Integer32 (1..15)
              MAX-ACCESS  read-only
              STATUS      current
              DESCRIPTION
                  "An arbitrary integer within the range from 1 to the value of
                   Max Instance Number that uniquely identifies an instance."
              ::= { mstVlanMstiMappingEntry 1 }
        
        mstSetVlanList OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..512))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
           	 "A string of octets containing one bit per VLAN. The
        	  first octet corresponds to VLANs with VlanIndex values
        	  1 through 8; the second octet to VLANs 9 through
        	  16 etc.  The most significant bit of each octet
        	  corresponds to the lowest VlanIndex value in that octet.
        	  The set of vlans configured by management to map for this 
        	  Instance.  If the VlanId to Instance Mapping has to be known
              then any one of the VlanMapped object should be used.If a 
              vlan is already mapped to this Instance, it may not be mapped 
              again. This object is used only for SET operation.
              GET Operation returns null values."
            ::= { mstVlanMstiMappingEntry 2 }
        
        mstResetVlanList OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..512))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
           	 "A string of octets containing one bit per VLAN. The
        	  first octet corresponds to VLANs with VlanIndex values
        	  1 through 8; the second octet to VLANs 9 through
        	  16 etc.  The most significant bit of each octet
        	  corresponds to the lowest VlanIndex value in that octet.
        	  The set of vlans configured by management to unmap from this 
        	  Instance. A vlan may not be unmapped from this instance if 
        	  it is not already mapped to this Instance. This object is
              used only for SET operation.GET Operation returns null values."
            ::= { mstVlanMstiMappingEntry 3 }
        
        mstInstanceVlanMapped OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN. The
                    first octet corresponds to VLANs with VlanIndex values
                    1 through 8; the second octet to VLANs 9 through
                    16 etc.  The most significant bit of each octet
                    corresponds to the lowest VlanIndex value in that octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'."
            ::= { mstVlanMstiMappingEntry 4 }
        
        mstInstanceVlanMapped2k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 1024 through 2047. The
                    first octet corresponds to VLANs with VlanIndex values
                    1024 through 1031; the second octet to VLANs 1032
                    through 1039 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
                    
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstVlanMstiMappingEntry 5 }
        
        mstInstanceVlanMapped3k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 2048 through 3071. The
                    first octet corresponds to VLANs with VlanIndex values
                    of 2048 through 2055; the second octet to VLANs 2056
                    through 2063 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
        
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstVlanMstiMappingEntry 6 }
        
        mstInstanceVlanMapped4k OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (0..128))
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                    "A string of octets containing one bit per VLAN for
                    VLANS with VlanIndex values 3072 through 4095. The
                    first octet corresponds to VLANs with VlanIndex values
                    3072 through 3079; the second octet to VLANs 3080
                    through 3087 etc.  The most significant bit of each
                    octet corresponds to the lowest VlanIndex value in that
                    octet.
        
                    For each VLAN that is mapped to this MSTP instance,
                    the bit corresponding to that VLAN is set to '1'.
        
                    This object is only instantiated on devices with 
                    support for VlanIndex values up to 4095."
            ::= { mstVlanMstiMappingEntry 7 }
            
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Bridge Table
        -- -----------------------------------------------------------------
        stpInstance  OBJECT IDENTIFIER ::= { companySTP 4 }
        
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Bridge Table : CIST
        -- -----------------------------------------------------------------
        mstCistBridgePriority OBJECT-TYPE
           SYNTAX      Integer32 (0..61440) 
           MAX-ACCESS  read-write     
           STATUS      current 
           DESCRIPTION 
              "The writable portion of the MSTI Bridge Identifier.
               comprising of the first two octets.
               The values that are set for Bridge Priority must be 
               in steps of 4096."
           DEFVAL {32768}
           ::= { stpInstance 1 }
           
        mstCistStatus OBJECT-TYPE
           SYNTAX   INTEGER { 
                        enabled(1), 
                        disabled(2) 
                    }
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The administrative status requested by management for the MST  
              feature. The value enabled(1) indicates that Mst should be enabled  
              in the device on all ports. The value disabled(2) indicates that 
              Mst should be disabled in the device on all ports. The object can 
              be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
           ::= { stpInstance 2 }
           
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Bridge Table : MSTI
        -- -----------------------------------------------------------------        
        mstMstiBridgeTable OBJECT-TYPE
           SYNTAX      SEQUENCE OF MstMstiBridgeEntry      
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION
              "Table containing Bridge Information specific to Spanning 
               Tree Instance. This table maintains context ID as one 
               more index to support Multiple Instances."
           ::= { stpInstance 3 } 
         
        mstMstiBridgeEntry OBJECT-TYPE
           SYNTAX      MstMstiBridgeEntry       
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              "Entry indicating the Bridge Information."
           INDEX { mstMstiInstanceIndex }
           ::= { mstMstiBridgeTable 1 }
        
        MstMstiBridgeEntry ::=
           SEQUENCE {
              mstMstiInstanceIndex 
                    Integer32,
              mstMstiBridgePriority 
                    Integer32,
              mstMstiStatus
                    INTEGER
           }
        
        mstMstiInstanceIndex OBJECT-TYPE
           SYNTAX      Integer32 (1..15)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "Spanning Tree Instance to which the information belongs."
           ::= { mstMstiBridgeEntry 1 }
        
        mstMstiBridgePriority OBJECT-TYPE
           SYNTAX      Integer32 (0..61440) 
           MAX-ACCESS  read-write     
           STATUS      current 
           DESCRIPTION 
              "The writable portion of the MSTI Bridge Identifier.
               comprising of the first two octets.
               The values that are set for Bridge Priority must be 
               in steps of 4096."
           DEFVAL {32768}
           ::= { mstMstiBridgeEntry 2 }
       
        mstMstiStatus OBJECT-TYPE
           SYNTAX   INTEGER { 
                        enabled(1), 
                        disabled(2) 
                    }
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The administrative status requested by management for the MST  
              feature. The value enabled(1) indicates that Mst should be enabled  
              in the device on all ports. The value disabled(2) indicates that 
              Mst should be disabled in the device on all ports. The object can 
              be set to enabled(1) if and only if, fsMIMstSystemControl set to start."
           ::= { mstMstiBridgeEntry 3 }
        
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Bridge Table
        -- -----------------------------------------------------------------
        stpInstancePortTable  OBJECT IDENTIFIER ::= { companySTP 5 }
        
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Port Table : CIST
        -- -----------------------------------------------------------------
        mstCistPortTable OBJECT-TYPE
            SYNTAX      SEQUENCE OF MstCistPortEntry              
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                  "This table contains Common Spanning Tree Port
                   Information."
             ::= { stpInstancePortTable 1 }
        
        mstCistPortEntry OBJECT-TYPE
              SYNTAX      MstCistPortEntry               
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                  "A list of information maintained by every port for 
                  Common Spanning tree."
              INDEX  { mstCistPort }
              ::= { mstCistPortTable 1 }
        
        MstCistPortEntry ::= 
           SEQUENCE {
               mstCistPort  
                    Integer32,
               mstCistPortDesignatedBridge 
                    BridgeId,
               mstCistPortAdminPathCost 
                    Integer32,
               mstCistPortPathCost 
                    Integer32,
               mstCistPortPriority 
                    Integer32,
               mstCistForcePortState 
                    INTEGER,
               mstCistCurrentPortRole  
                    INTEGER
        }
        
        mstCistPort OBJECT-TYPE
              SYNTAX      Integer32 (1..65535)
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                  "The Port number of the port for which this entry contains   
                   spanning tree information."                                      
              ::= { mstCistPortEntry 1 }
        
        mstCistPortDesignatedBridge OBJECT-TYPE
              SYNTAX      BridgeId                 
              MAX-ACCESS  read-only            
              STATUS      current
              DESCRIPTION
                  "The unique Bridge Identifier of the bridge which this port  
                   considers to be the Designated Bridge for the port's segment."   
              ::= { mstCistPortEntry 2 }
        
        mstCistPortAdminPathCost OBJECT-TYPE
              SYNTAX      Integer32 (0..200000000)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The contribution of this port to the path cost of
                   paths towards the MSTI Root which include this port."
              ::= { mstCistPortEntry 3 }
        
        mstCistPortPathCost OBJECT-TYPE
              SYNTAX      Integer32 (1..200000000)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The contribution of this port to the path cost of
                   paths towards the MSTI Root which include this port."
              ::= { mstCistPortEntry 4 }
        
        mstCistPortPriority OBJECT-TYPE
              SYNTAX      Integer32 (0..240)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The four most significant bits of the Port Identifier 
                  for a given Spanning Tree instance can be modified 
                  independently for each Spanning Tree instance 
                  supported by the Bridge. The values that are set for Port 
                  Priority must be in steps of 16."
            DEFVAL {128}
              ::= { mstCistPortEntry 5 }
        
        mstCistForcePortState OBJECT-TYPE
              SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                          }
              MAX-ACCESS  read-only           
              STATUS      current
              DESCRIPTION
                  "Current state of the Port which can be changed to either 
                   Disabled or Enabled for the specific spanning tree   
                   instance. This object can be set to enabled only if the 
                   'fsMIMstCistForcePortState' is set to 'enabled' for this port"                                            
              ::= { mstCistPortEntry 6 }
        
        mstCistCurrentPortRole OBJECT-TYPE
              SYNTAX      INTEGER {              
                           disabled(0),
                           alternate(1),
                           backup(2),
                           root(3),
                           designated(4),
                           master(5)
                          }
              MAX-ACCESS  read-only        
              STATUS      current
              DESCRIPTION
                  "Current Port Role of the port for this spanning 
                  tree instance."                                      
              ::= { mstCistPortEntry 7 }
          
        -- -----------------------------------------------------------------
        -- Mst Multiple Spanning Tree Instance Port Table : MSTI
        -- -----------------------------------------------------------------
        mstMstiPortTable OBJECT-TYPE
            SYNTAX      SEQUENCE OF MstMstiPortEntry              
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                  "This table contains Spanning Tree Instance Specific Port
                   Information."
             ::= { stpInstancePortTable 2 }
        
        mstMstiPortEntry OBJECT-TYPE
              SYNTAX      MstMstiPortEntry               
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                  "A list of information maintained by every port for each 
                   and every spanning tree instance."
              INDEX  { mstMstiPort, mstInstanceIndex }
              ::= { mstMstiPortTable 1 }
        
        MstMstiPortEntry ::= 
           SEQUENCE {
               mstMstiPort  
                    Integer32,
               mstMstiPortDesignatedBridge 
                    BridgeId,
               mstMstiPortAdminPathCost 
                    Integer32,
               mstMstiPortPathCost 
                    Integer32,
               mstMstiPortPriority 
                    Integer32,
               mstMstiForcePortState 
                    INTEGER,
               mstMstiCurrentPortRole  
                    INTEGER
        }
        
        mstMstiPort OBJECT-TYPE
              SYNTAX      Integer32 (1..65535)
              MAX-ACCESS  not-accessible
              STATUS      current
              DESCRIPTION
                  "The Port number of the port for which this entry contains   
                   spanning tree information."                                      
              ::= { mstMstiPortEntry 1 }
              
        mstMstiPortDesignatedBridge OBJECT-TYPE
              SYNTAX      BridgeId                 
              MAX-ACCESS  read-only            
              STATUS      current
              DESCRIPTION
                  "The unique Bridge Identifier of the bridge which this port  
                   considers to be the Designated Bridge for the port's segment."   
              ::= { mstMstiPortEntry 2 }
        
        mstMstiPortAdminPathCost OBJECT-TYPE
              SYNTAX      Integer32 (0..200000000)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The contribution of this port to the path cost of
                   paths towards the MSTI Root which include this port."
              ::= { mstMstiPortEntry 3 }
        
        mstMstiPortPathCost OBJECT-TYPE
              SYNTAX      Integer32 (1..200000000)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The contribution of this port to the path cost of
                   paths towards the MSTI Root which include this port."
              ::= { mstMstiPortEntry 4 }
        
        mstMstiPortPriority OBJECT-TYPE
              SYNTAX      Integer32 (0..240)
              MAX-ACCESS  read-write           
              STATUS      current
              DESCRIPTION
                  "The four most significant bits of the Port Identifier 
                  for a given Spanning Tree instance can be modified 
                  independently for each Spanning Tree instance 
                  supported by the Bridge. The values that are set for Port 
                  Priority must be in steps of 16."
            DEFVAL {128}
              ::= { mstMstiPortEntry 5 }
        
        mstMstiForcePortState OBJECT-TYPE
              SYNTAX      INTEGER {
                           disabled(0),
                           enabled(1)
                          }
              MAX-ACCESS  read-only           
              STATUS      current
              DESCRIPTION
                  "Current state of the Port which can be changed to either 
                   Disabled or Enabled for the specific spanning tree   
                   instance. This object can be set to enabled only if the 
                   'fsMIMstCistForcePortState' is set to 'enabled' for this port"                                            
              ::= { mstMstiPortEntry 6 }
        
        mstMstiCurrentPortRole OBJECT-TYPE
              SYNTAX      INTEGER {              
                           disabled(0),
                           alternate(1),
                           backup(2),
                           root(3),
                           designated(4),
                           master(5)
                          }
              MAX-ACCESS  read-only        
              STATUS      current
              DESCRIPTION
                  "Current Port Role of the port for this spanning 
                  tree instance."                                      
              ::= { mstMstiPortEntry 7 }
        

    -- ------------------------------------------------------------------
    -- The Static Multicast Group
    -- ------------------------------------------------------------------

      staticMcastTable OBJECT-TYPE
            SYNTAX SEQUENCE OF StaticMcastEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "A list of the Static MACs"
            ::= { companyStaticMcast 1 }

        staticMcastEntry OBJECT-TYPE
            SYNTAX StaticMcastEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "A Static MAC entry containing the mac and forwarding port."
            INDEX { staticMcastVlanID, staticMcastMac, staticMcastEgressPorts}
            ::= { staticMcastTable 1 }

        StaticMcastEntry ::= SEQUENCE {
            staticMcastVlanID     	 INTEGER,
            staticMcastMac           MacAddress,
            staticMcastEgressPorts   PortList,
            staticMcastStatus        RowStatus
        }

        staticMcastVlanID OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The VLAN ID of the static MAC entry."
            ::= { staticMcastEntry 1 }

        staticMcastMac OBJECT-TYPE
           SYNTAX MacAddress
           MAX-ACCESS read-only
           STATUS current
           DESCRIPTION
               "The MAC address associated of the static MAC entry."
           ::= { staticMcastEntry 2 }

        staticMcastEgressPorts OBJECT-TYPE
            SYNTAX      PortList
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The set of ports to which frames received from a
                specific port and destined for a specific Multicast or
                Broadcast MAC address must be forwarded, regardless of
                any dynamic information e.g. from GMRP.  A port may not
                be added in this set if it is already a member of the
                set of ports in dot1qStaticMulticastForbiddenEgressPorts.
                The default value of this object is a string of ones of
                appropriate length."
            REFERENCE
                "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
            ::= { staticMcastEntry 3 }
        
        staticMcastStatus OBJECT-TYPE
            SYNTAX     RowStatus
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                "The status of an entry in the Static Mcast Table.  Only a subset
                 of the rowstatus variables (active, createAndGo, destroy) 
                 are available."
            ::= { staticMcastEntry 4 }


  		-- ----------------------------------------------------------
		-- The 802.1Q VLAN Groups
		-- ----------------------------------------------------------      		

        dot1qVlanManagementOnOff OBJECT-TYPE
            SYNTAX INTEGER {
                   enabled(1),
                   disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Enable/Disable management VLAN mechanism."
            ::= { companyDot1qVlanGroup 2 }

        dot1qVlanManagementid OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The management VLAN ID, which will allow to forward packets of that VLAN to CPU."
            DEFVAL { 1 }
            ::= { companyDot1qVlanGroup 3 }

        dot1qVlanAsyOnOff OBJECT-TYPE
            SYNTAX INTEGER {
                   enabled(1),
                   disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Enable/Disable IEEE 802.1Q Asymmetric VLAN"
            ::= { companyDot1qVlanGroup  5 }
            
        -- -------------------------------------------------------------
        -- The VLAN Database
        -- -------------------------------------------------------------
        
        dot1qVlanTable OBJECT-TYPE
            SYNTAX      SEQUENCE OF Dot1qVlanEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                "A table containing static configuration information for
                each VLAN configured into the device by (local or
                network) management.  All entries are permanent and will
                be restored after the device is reset."
            ::= { companyDot1qVlanGroup 6 }
        
        dot1qVlanEntry OBJECT-TYPE
            SYNTAX      Dot1qVlanEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                "Information for a VLAN configured into the
                device by (local or network) management."
            INDEX   { dot1qVlanName }
            ::= { dot1qVlanTable 1 }
        
        Dot1qVlanEntry ::=
            SEQUENCE {
                dot1qVlanName
                    SnmpAdminString,
                dot1qVlanEgressPorts
                    PortList,
                dot1qVlanForbiddenPorts
                    PortList,
                dot1qVlanUntaggedPorts
                    PortList,
                dot1qVlanRowStatus
                    RowStatus
            }
        
        dot1qVlanName OBJECT-TYPE
            SYNTAX      SnmpAdminString (SIZE (0..20))
            MAX-ACCESS  read-create
            STATUS      current
            DESCRIPTION
                "An administratively assigned string, which may be used
                to identify the VLAN."
            REFERENCE
                "IEEE 802.1Q/D11 Section 12.10.2.1"
            ::= { dot1qVlanEntry 1 }
        
        dot1qVlanEgressPorts OBJECT-TYPE
            SYNTAX      PortList
            MAX-ACCESS  read-create
            STATUS      current
            DESCRIPTION
                "The set of ports which are permanently assigned to the
                egress list for this VLAN by management.  Changes to a
                bit in this object affect the per-port per-VLAN
                Registrar control for Registration Fixed for the
                relevant GVRP state machine on each port.  A port may
                not be added in this set if it is already a member of
                the set of ports in dot1qVlanForbiddenEgressPorts.  The
                default value of this object is a string of zeros of
                appropriate length, indicating not fixed."
            REFERENCE
                "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
            ::= { dot1qVlanEntry 2 }
        
        dot1qVlanForbiddenPorts OBJECT-TYPE
            SYNTAX      PortList
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The set of ports which are prohibited by management
                from being included in the egress list for this VLAN.
                Changes to this object that cause a port to be included
                or excluded affect the per-port per-VLAN Registrar
                control for Registration Forbidden for the relevant GVRP
                state machine on each port.  A port may not be added in
                this set if it is already a member of the set of ports
                in dot1qVlanEgressPorts.  The default value of
                this object is a string of zeros of appropriate length,
                excluding all ports from the forbidden set."
            REFERENCE
                "IEEE 802.1Q/D11 Section 12.7.7.3, 11.2.3.2.3"
            ::= { dot1qVlanEntry 3 }
        
        dot1qVlanUntaggedPorts OBJECT-TYPE
            SYNTAX      PortList
            MAX-ACCESS  read-create
            STATUS      current
            DESCRIPTION
                "The set of ports which should transmit egress packets
                for this VLAN as untagged.  The default value of this
                object for the default VLAN (dot1qVlanIndex = 1) is a string
                of appropriate length including all ports.  There is no
                specified default for other VLANs.  If a device agent cannot
                support the set of ports being set then it will reject the
                set operation with an error. An example might be if a
                manager attempts to set more than one VLAN to be untagged
                on egress where the device does not support this IEEE 802.1Q
                option."
            REFERENCE
                "IEEE 802.1Q/D11 Section 12.10.2.1"
            ::= { dot1qVlanEntry 4 }
        
        dot1qVlanRowStatus OBJECT-TYPE
            SYNTAX      RowStatus
            MAX-ACCESS  read-create
            STATUS      current
            DESCRIPTION
                "The status of a row in dot1qVlanTable. By setting this object, new
                entries can be created in dot1qVlanTable and existing entries can be
                removed from dot1qVlanTable. It can be used as specified in the SNMP
                v2 standard."
            ::= { dot1qVlanEntry 5 }
    
        -- -------------------------------------------------------------
        -- The VLAN Ungister Multicast Filter Table
        -- -------------------------------------------------------------
      dot1qVlanUngisterMCFilterTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF Dot1qVlanUngisterMCFilterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "This table contains the list of ports through which 
              a router, in a particular VLAN is reachable." 
          ::= { companyDot1qVlanGroup 8 } 
 
      dot1qVlanUngisterMCFilterEntry OBJECT-TYPE 
          SYNTAX      Dot1qVlanUngisterMCFilterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "A list of multicast filter mode information for each VLAN ID." 
          INDEX { dot1qVlanUngisterMCFilterVlanId } 
          ::= { dot1qVlanUngisterMCFilterTable 1 } 
 
      Dot1qVlanUngisterMCFilterEntry ::= SEQUENCE { 
          dot1qVlanUngisterMCFilterVlanId             Integer32,
          dot1qVlanUngisterMCFiltermode               INTEGER
      }
           
      dot1qVlanUngisterMCFilterVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (1..4094) 
           MAX-ACCESS  read-only
           STATUS      current 
           DESCRIPTION 
              "Per Vlan to configure multicast filtering function." 
           ::= { dot1qVlanUngisterMCFilterEntry 1 } 
 
      dot1qVlanUngisterMCFiltermode OBJECT-TYPE 
           SYNTAX      INTEGER { filter(1), forward(0) } 
           MAX-ACCESS  read-write
           STATUS      current 
           DESCRIPTION 
               "Filter unknown multicast frames or normal operation(i.e. forwarding)"
           ::= { dot1qVlanUngisterMCFilterEntry 2 } 


  		-- ----------------------------------------------------------
		-- The GVRP Groups
		-- ----------------------------------------------------------

        gvrpGVRPGlobalSettingsOnOff OBJECT-TYPE
            SYNTAX      INTEGER { enabled(1), disabled(2) }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Enable/Disable GVRP mechanism."
            ::= { companyGVRPGroup 1 }

        gvrpSettingsJoinTime OBJECT-TYPE
            SYNTAX       INTEGER (100..100000)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The Join Time value assigned to this Join Time field.
            This 16-bit value is read-write."
            ::= { companyGVRPGroup 2 }

        gvrpSettingsLeaveTime OBJECT-TYPE
            SYNTAX       INTEGER (100..100000)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The Leave Time value assigned to this Leave Time field.
            This 16-bit value is read-write."
            ::= { companyGVRPGroup 3 }

        gvrpSettingsLeaveAllTime OBJECT-TYPE
            SYNTAX       INTEGER (100..100000)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The Leave_All Time value assigned to this Leave_All Time field.
            This 16-bit value is read-write."
            ::= { companyGVRPGroup 4 }



        -- GRVP Port Setting Table
        --

        gvrpSettingsTable OBJECT-TYPE
            SYNTAX      SEQUENCE OF GvrpSettingsEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                "A table containing static configuration information for
                each GVRP configured into the device by (local or
                network) management.  All entries are permanent and will
                be restored after the device is reset."
            ::= { companyGVRPGroup 5 }

        gvrpSettingsEntry OBJECT-TYPE
            SYNTAX      GvrpSettingsEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                "Information for a GVRP configured into the
                device by (local or network) management."
            INDEX   { gvrpSettingsPortControlIndex }
            ::= { gvrpSettingsTable 1 }

        GvrpSettingsEntry ::=
          SEQUENCE {
            gvrpSettingsPortControlIndex
                InterfaceIndex,
            gvrpSettingsPVID
                INTEGER,
            gvrpSettingsGVRPState
                INTEGER,
            gvrpSettingsIngressChecking
                INTEGER,
            gvrpSettingsAcceptableFrameType
                INTEGER
        }

        gvrpSettingsPortControlIndex OBJECT-TYPE
          SYNTAX       InterfaceIndex
          MAX-ACCESS   read-only
                STATUS       current
                DESCRIPTION
              "The index of the port."
          ::= { gvrpSettingsEntry 1 }

        gvrpSettingsPVID OBJECT-TYPE
          SYNTAX       INTEGER (1..4094)
          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "The PVID value assigned to this Aggregation Port.
            This 16-bit value is read-write."
          ::= { gvrpSettingsEntry 2 }

        gvrpSettingsGVRPState OBJECT-TYPE
            SYNTAX      INTEGER { enabled(1), disabled(2) }

          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "Enable/Disable GVRP State to this Aggregation Port."
          ::= { gvrpSettingsEntry 3 }

        gvrpSettingsIngressChecking OBJECT-TYPE
            SYNTAX      INTEGER { enabled(1), disabled(2) }

          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "Enable/Disable Ingress Checking mechanism of GVRP to this Aggregation Port."
          ::= { gvrpSettingsEntry 4 }

        gvrpSettingsAcceptableFrameType OBJECT-TYPE
          SYNTAX       INTEGER {
                   allFrames(1),
                   taggedOnly(2)
            }
          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "Chose types All Frames/Tagged to this Aggregation Port."
          ::= { gvrpSettingsEntry 5 }

        -- ----------------------------------------------------------
		-- The DHCP/BOOTP Relay
		-- ----------------------------------------------------------

		-- The DHCP/BOOTP Relay Control

            dhcpBOOTPRelayState OBJECT-TYPE
                SYNTAX  INTEGER {
                    enabled(1),
                    disabled(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP relay function is enabled or disabled."
            ::= { dhcpBOOTPRelayControl 1 }

            dhcpBOOTPRelayHopCount OBJECT-TYPE
                SYNTAX  INTEGER (1..16)
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates the maximum number of router hops that the BOOTP packets can cross."
            ::= { dhcpBOOTPRelayControl 2 }

            dhcpBOOTPRelayTimeThreshold OBJECT-TYPE
                SYNTAX  INTEGER (0..65535)
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates the minimum time in seconds within which the switch must relay the DHCP request.
                    If this time is exceeded, the switch will drop the DHCP packet."
            ::= { dhcpBOOTPRelayControl 3 }


		-- The DHCP/BOOTP Relay Management
		-- The DHCP/BOOTP Relay Interface Settings Table

            dhcpBOOTPRelayInterfaceSettingsTable OBJECT-TYPE
                SYNTAX  SEQUENCE OF DHCPBOOTPRelayInterfaceSettings
                MAX-ACCESS  not-accessible
                STATUS  current
                DESCRIPTION
                    "This table indicates the IP address as a destination to forward (relay) DHCP packets to."
            ::= { dhcpBOOTPRelayManagement 1 }

            dhcpBOOTPRelayInterfaceSettingsEntry OBJECT-TYPE
                SYNTAX  DHCPBOOTPRelayInterfaceSettings
                MAX-ACCESS  not-accessible
                STATUS  current
                DESCRIPTION
                    "A list of information indicates the IP address as a destination to forward (relay) DHCP packets to."
                INDEX  { dhcpBOOTPRelayInterface,  dhcpBOOTPRelayServerIP}
            ::= { dhcpBOOTPRelayInterfaceSettingsTable 1 }

            DHCPBOOTPRelayInterfaceSettings ::=
                SEQUENCE {
                    dhcpBOOTPRelayInterface
                        DisplayString,
                    dhcpBOOTPRelayServerIP
                        IpAddress,
                    dhcpBOOTPRelayInterfaceSettingsRowStatus
                        RowStatus
                }

            dhcpBOOTPRelayInterface OBJECT-TYPE
                SYNTAX  DisplayString (SIZE(0..12))
                MAX-ACCESS  read-only
                STATUS  current
                DESCRIPTION
                    "This object indicates the name of the IP interface."
            ::= { dhcpBOOTPRelayInterfaceSettingsEntry 1 }

            dhcpBOOTPRelayServerIP OBJECT-TYPE
                SYNTAX IpAddress
                MAX-ACCESS  read-only
                STATUS current
                DESCRIPTION
                    "This object indicates the DHCP server IP address."
            ::= { dhcpBOOTPRelayInterfaceSettingsEntry 2 }

            dhcpBOOTPRelayInterfaceSettingsRowStatus OBJECT-TYPE
                SYNTAX  RowStatus
                MAX-ACCESS  read-create
                STATUS  current
                DESCRIPTION
                    "This object indicates the status of this entry."
            ::= { dhcpBOOTPRelayInterfaceSettingsEntry 3 }

		-- The DHCP/BOOTP Relay Management
		-- The DHCP/BOOTP Relay Option82

            dhcpBOOTPRelayOption82State OBJECT-TYPE
                SYNTAX  INTEGER {
                    enabled(1),
                    disabled(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP relay option 82 function is enabled or disabled."
            ::= { dhcpBOOTPRelayManagementOption82 1 }

            dhcpBOOTPRelayOption82CheckState OBJECT-TYPE
                SYNTAX  INTEGER {
                    enabled(1),
                    disabled(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP relay option 82 Check function is enabled or disabled."
            ::= { dhcpBOOTPRelayManagementOption82 2 }

            dhcpBOOTPRelayOption82Policy OBJECT-TYPE
                SYNTAX  INTEGER {
                    replace(1),
                    drop(2),
                    keep(3)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP relay option 82 policy."
            ::= { dhcpBOOTPRelayManagementOption82 3 }

	        dhcpBOOTPRelayOption82RemoteIDType OBJECT-TYPE
                SYNTAX  INTEGER {
                    default(1),
                    userdefined(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates the type of remote ID.
                    If the type is default, the remote ID will be the MAC address of the device, otherwise,
                    the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object."
            ::= { dhcpBOOTPRelayManagementOption82 4 }

	        dhcpBOOTPRelayOption82RemoteID OBJECT-TYPE
                SYNTAX  DisplayString
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object displays the current remote ID of the device.
                    If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device,
                    and this object cannot be modified.
                    If swDHCPRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object."
            ::= { dhcpBOOTPRelayManagementOption82 5 }
  		-- ----------------------------------------------------------
		-- The DHCP LocalRelay
		-- ----------------------------------------------------------
		-- The DHCP Local Relay Table
            dhcpLocalRelayGlobalState OBJECT-TYPE
                SYNTAX  INTEGER {
                    enabled(1),
                    disabled(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP local relay function of VLAN is enabled or disabled."
            ::= { companyDHCPLocalRelay 1 }

            dhcpLocalRelayTable OBJECT-TYPE
                SYNTAX  SEQUENCE OF DHCPLocalRelaySettings
                MAX-ACCESS  not-accessible
                STATUS  current
                DESCRIPTION
                    "This table indicates the IP address as a destination to forward (local relay) DHCP packets to."
            ::= { companyDHCPLocalRelay 2 }

            dhcpLocalRelayTableEntry OBJECT-TYPE
                SYNTAX  DHCPLocalRelaySettings
                MAX-ACCESS  not-accessible
                STATUS  current
                DESCRIPTION
                    "A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to."
                INDEX  { dhcpLocalRelaySettingsVLANID }
            ::= { dhcpLocalRelayTable 1 }

            DHCPLocalRelaySettings ::=
                SEQUENCE {
                    dhcpLocalRelaySettingsVLANID
                        INTEGER,
                    dhcpLocalRelaySettingsState
                        INTEGER
                }

	        dhcpLocalRelaySettingsVLANID OBJECT-TYPE
                SYNTAX  INTEGER (1..4094)
                MAX-ACCESS  read-only
                STATUS  current
                DESCRIPTION
                    "This object displays the current VLAN ID of the device."
            ::= { dhcpLocalRelayTableEntry 1 }

            dhcpLocalRelaySettingsState OBJECT-TYPE
                SYNTAX  INTEGER {
                    enabled(3),
                    disabled(2)
                }
                MAX-ACCESS  read-write
                STATUS  current
                DESCRIPTION
                    "This object indicates DHCP local relay function of VLAN is enabled or disabled."
            ::= { dhcpLocalRelayTableEntry 2 }
    -- ---------------------------------------------------------------------
    -- LA Function
    -- ---------------------------------------------------------------------
          
      laSystem                OBJECT IDENTIFIER ::= { companyLA 1 }
      laPortControl           OBJECT IDENTIFIER ::= { companyLA 2 }

    -- -------------------------------------------------------------
    -- Textual Conventions
    -- -------------------------------------------------------------
    
     PortLaMode ::= TEXTUAL-CONVENTION
         STATUS         current
         DESCRIPTION    
           "Defines how a Port Channel does channeling.
           lacp(1)      - place the port into passive 
                           negotiation state, in which the
                           port waits for its peer to 
                           initiate negotiation.
           static(2)    - force the port to enable 
                           channeling.
           disable(3)   - channeling is disabled."
                     
     SYNTAX INTEGER {
                       lacp(1),
                       static(2),
                       disable(3)
                    }

     LacpKey ::= TEXTUAL-CONVENTION
         STATUS    current
         DESCRIPTION
                "The Actor or Partner Key value (0..65535)."
         SYNTAX Integer32 (0..65535)
 

    -- ------------------------------------------------------------------
    -- The La System Group
    -- ------------------------------------------------------------------

      laStatus OBJECT-TYPE
           SYNTAX      INTEGER { enabled(1), disabled(2) }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
               "Sets the Link Aggregation Module administrative status as 
                enabled or disabled."
           ::= { laSystem 2 }

        --
    -- Port Channel Table
    --
    
    laPortChannelTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF LaPortChannelEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "A Port-channel is created through ifMain table.
           After the creation of the port-channel, corresponding logical
           interface will be created in the ifMain table. 
           This Port-channel table is indexed through Key values and allows to 
           configure link selection policy and the Mac address for 
           the port-channel. All other objects in this table displays 
           the details of the port-channel."

        ::= { laSystem 3 }

    laPortChannelEntry OBJECT-TYPE
        SYNTAX     LaPortChannelEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "There is one entry in this table for each created
               port-channel port."

        INDEX { laPortChannelIfIndex }
        ::= { laPortChannelTable 1 }

    LaPortChannelEntry ::= 
            SEQUENCE {
              laPortChannelIfIndex                InterfaceIndex,
              laPortChannelMemberList             PortList,
              laPortChannelMode                   PortLaMode              
	      -- start CAMEO_LA_MASTER_PORT_WANTED
	      ,
              laPortChannelMasterPort             InterfaceIndex
	      -- end CAMEO_LA_MASTER_PORT_WANTED
              }

    laPortChannelIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
              "The index of the port-channel(Aggregator's 
               interface index). "
        ::= { laPortChannelEntry 1 }

  	laPortChannelMemberList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Member Port list of the port channel. Add the ports as a 
	        aggregation member associated of a port-channel."
	   ::= { laPortChannelEntry 2 }

        
    laPortChannelMode OBJECT-TYPE
       SYNTAX       PortLaMode
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "Current Operating Channel Mode of the port channel
                     Lacp(1)    - forcing the port to negotiate with the
                                  partner.
                     manual(2)  - force the port to enable channeling (Manual).
                     disable(3) - channeling is disabled."
        ::= { laPortChannelEntry 3 }
        
-- start CAMEO_LA_MASTER_PORT_WANTED
    laPortChannelMasterPort OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "The master port of the port-channel. "
        ::= { laPortChannelEntry 4 }
-- end CAMEO_LA_MASTER_PORT_WANTED

    -- ------------------------------------------------------------------
    -- The La Algorithm Group
    -- ------------------------------------------------------------------

      laAlgorithm OBJECT-TYPE
           SYNTAX      INTEGER { 
				sourceMAC(1), 
				destMAC(2), 
				sourceAndDestMAC(3), 
				sourceIP(4), 
				destIP(5), 
				sourceAndDestIP(6)
				}
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
               "Sets the Link Aggregation load balance algorithm."
           ::= { laSystem 4 }

    --
        -- LA Port Control Table
        --          

        laPortControlTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF LaPortControlEntry
          MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
                      "A table that contains Link Aggregation Control
                       configuration information about every
                       Aggregation Port associated with this device.
                       A row appears in this table for each physical port."
          ::= { laPortControl 1 }


        laPortControlEntry OBJECT-TYPE
          SYNTAX      LaPortControlEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
                      "A list of Link Aggregation Control configuration
                       parameters for each Aggregation Port on this device."
          INDEX      { laPortControlIndex }
          ::= { laPortControlTable 1 }  

        LaPortControlEntry ::=
          SEQUENCE {
            laPortControlIndex
                InterfaceIndex,
            laPortActorPortPriority
                INTEGER,
            laPortActorActivity
                INTEGER,
            laPortActorTimeout
                INTEGER        
        }
        
        laPortControlIndex OBJECT-TYPE
          SYNTAX       InterfaceIndex
          MAX-ACCESS   read-only
                STATUS       current
                DESCRIPTION
              "The index of the port."
          ::= { laPortControlEntry 1 }    
        
        laPortActorPortPriority OBJECT-TYPE
          SYNTAX       INTEGER (0..65535)
          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "The priority value assigned to this Aggregation Port.
            This 16-bit value is read-write."
          ::= { laPortControlEntry 2 }  
       
        laPortActorActivity      OBJECT-TYPE 
            SYNTAX INTEGER  {
        		 active(1),
        		 passive(2)
            }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
                "This object indicates LACP_Activity to this Aggregation Port. 
                LACP can be configured in one of two modes: active or passive. 
                In active mode it will always send frames along the configured links. 
                If the actor and partner are both in passive mode, they do not 
                exchange LACP packets." 
           ::= { laPortControlEntry 3 }    

        laPortActorTimeout      OBJECT-TYPE 
            SYNTAX INTEGER  {
        		 short(1),
        		 long(2)
            }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
                "This object indicates LACP_Timeout to this Aggregation Port.
                short(1) - LACP Timeout 3 seconds.
                long (2) - LACP Timeout 90 seconds." 
           ::= { laPortControlEntry 4 }  

        -- ----------------------------------------------------------------
        -- The STATIC MAC group
        -- ----------------------------------------------------------------
        
        staticDisableAutoLearn OBJECT-TYPE
            SYNTAX INTEGER {
                   on(1),
                   off(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "Set on to disable Auto Learning Excluding Uplink Port and
                 set off to enable Auto Learning."
            ::= { companyStaticMAC 1 }

        staticAutoLearningList OBJECT-TYPE
            SYNTAX PortList
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The set of the device's member ports that belong
 	            to the Static MAC auto learning enable/disable.
 	            
 	            For example, when Disable Auto Learning is enable,
 	            the octet value set up as '# 0x0F 0xFF 0xFF 0xFF' means 
 	            from port 1 to port 4 are not in auto learning state, 
 	            the other ports are in auto learning state. It can be 
 	            set up when Disable Auto Learning is enable."
            ::= { companyStaticMAC 2 }

        staticTable OBJECT-TYPE
            SYNTAX SEQUENCE OF StaticEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "A list of the Static MACs"
            ::= { companyStaticMAC 3 }

        staticEntry OBJECT-TYPE
            SYNTAX StaticEntry
            MAX-ACCESS not-accessible
            STATUS current
            DESCRIPTION
                "A Static MAC entry containing the mac and forwarding port."
            INDEX { staticVlanID, staticMac,staticPort}
            ::= { staticTable 1 }

        StaticEntry ::= SEQUENCE {
            staticVlanID     	INTEGER,
            staticMac           MacAddress,
            staticPort          INTEGER,
            staticStatus        RowStatus
        }

        staticVlanID OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The VLAN ID of the static MAC entry."
            ::= { staticEntry 1 }

         staticMac OBJECT-TYPE
           SYNTAX MacAddress
           MAX-ACCESS read-only
           STATUS current
           DESCRIPTION
               "The MAC address associated of the static MAC entry."
           ::= { staticEntry 2 }

        staticPort OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The forwarding port of the static MAC entry."
            ::= { staticEntry 3 }
        
        staticStatus OBJECT-TYPE
            SYNTAX     RowStatus
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
                "The status of an entry in the Static MAC Table.  Only a subset
                 of the rowstatus variables (active, createAndGo, destroy) 
                 are available. The trunk member port can not set up static MAC."
            ::= { staticEntry 4 }
    -- ---------------------------------------------------------------------
    -- IGMP Snooping Function
    -- ---------------------------------------------------------------------
	igsSystem  OBJECT IDENTIFIER ::= { companyIgsGroup 1 }
	igsVlan    OBJECT IDENTIFIER ::= { companyIgsGroup 3 }
    igsAccessAuth  OBJECT IDENTIFIER ::= { companyIgsGroup 5 }

      igsStatus OBJECT-TYPE 
          SYNTAX      INTEGER  { enabled(1), disabled(2) } 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "Enables or disables IGMP snooping in the system.
              When set to 'enabled', the IGS module starts 
              protocol operations.
              When set to 'disabled', the IGS module stops performing 
              protocol operations."
          DEFVAL  { 2 } 
          ::= { igsSystem 1 } 
 
      igsRouterPortPurgeInterval OBJECT-TYPE 
          SYNTAX      Integer32 (60..600) 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "This is the interval (in seconds) after which a learnt  
              router port entry will be purged. For each router port learnt, 
              this timer runs for 'RouterPortPurgeInterval' seconds.When the 
              timer expires, the learnt router port entry is purged. However 
              if control messages are received from the router before the 
              timer expiry, then the timer is restarted."
          DEFVAL  { 260 } 
          ::= { igsSystem 2 } 
 
      igsHostPortPurgeInterval OBJECT-TYPE 
          SYNTAX      Integer32 (130..153025) 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "This is the interval (in seconds) after which a learnt  
              port entry will be purged. For each port on which report
              has been received this timer runs for 'PortPurgeInterval'
              seconds. This timer will be restarted whenever a report 
              message is received from a host on the specific port. If 
              the timer expires, then , the learnt port entry  will 
              be purged from the multicast group." 
          DEFVAL  {260} 
          ::= { igsSystem 3 } 
            
      igsRobustnessValue OBJECT-TYPE
          SYNTAX      Integer32 (2..255)
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION 
	     "When the switch receives leave message on a port, it
              sends group specific query to check if there are any other 
              interested receivers for the group. This attribute defines 
              the maximum number of queries sent by the switch before deleting 
              the port from the group membership information in the forwarding 
              database. If the maximum retry count exceeds 'igsRobustnessValue', 
              then the port will be deleted from the multicast group membership
              information in the forwarding database and received leave message
              will be forwarded onto the router ports if there are no 
              interested receivers for the group." 
          DEFVAL  { 2 } 
          ::= { igsSystem 4 } 

      igsGrpQueryInterval OBJECT-TYPE 
          SYNTAX      Integer32 (1..25) 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "The value of this attribute defines the time period with which 
              the switch will send group specific queries on a port to check 
              if there is any intersted receivers. The switch will send 
              'igsRobustnessValue' queries before removing the port from the 
              group membership information in the forwarding database."
          DEFVAL  { 1 }
          ::= { igsSystem 5 }  

      igsQueryInterval OBJECT-TYPE 
          SYNTAX      Integer32 (60..600) 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "This is the interval (in seconds) for which the switch 
              sends general queries when it is configured as a querier for 
              VLANs."   
          DEFVAL  { 125 } 
          ::= { igsSystem 6 } 

    igsQueryMaxResponseTime OBJECT-TYPE
        SYNTAX      INTEGER (10..25)
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION 
        	"The maximum query response time advertised in IGMPv2 general
        	queries on this interface."
        DEFVAL     { 10 }
        ::= { igsSystem 7 }
	        
-- VLAN Based MAC Multicast Forwarding Table 
-- 
--      igsVlanMcastMacFwdTable OBJECT-TYPE 
--          SYNTAX      SEQUENCE OF IgsVlanMcastMacFwdEntry 
--          MAX-ACCESS  not-accessible 
--          STATUS      current 
--          DESCRIPTION 
--            "This table contains MAC based multicast forwarding 
--             information. This information is applicable only if
--             the 'igsVlanMcastForwardingMode' is set to 'macbased' " 
--          ::= { igsVlan 1 } 
-- 
--      igsVlanMcastMacFwdEntry OBJECT-TYPE 
--          SYNTAX      IgsVlanMcastMacFwdEntry 
--          MAX-ACCESS  not-accessible 
--          STATUS      current 
--          DESCRIPTION 
--            "This table contains VLAN ID, multicast group MAC address and the  
--             list of ports onto which the multicast data packets for group
--             should be forwarded."  
--
--          INDEX { igsVlanMcastMacFwdVlanId,
--                  igsVlanMcastMacFwdGroupAddress } 
--          ::= { igsVlanMcastMacFwdTable 1 } 
-- 
--      IgsVlanMcastMacFwdEntry ::= SEQUENCE { 
--          igsVlanMcastMacFwdVlanId           Integer32,
--          igsVlanMcastMacFwdGroupAddress     MacAddress, 
--          igsVlanMcastMacFwdPortList         PortList 
--        } 
--
--      igsVlanMcastMacFwdVlanId OBJECT-TYPE 
--           SYNTAX      Integer32 (1..4094) 
--           MAX-ACCESS  not-accessible 
--           STATUS      current 
--           DESCRIPTION 
--              "VLAN ID pertaining to the Multicast forwarding entry"  
--           ::= { igsVlanMcastMacFwdEntry 1 } 
-- 
--      igsVlanMcastMacFwdGroupAddress OBJECT-TYPE 
--           SYNTAX      MacAddress 
--           MAX-ACCESS  not-accessible 
--           STATUS      current 
--           DESCRIPTION 
--               "Multicast group MAC address." 
--           ::= { igsVlanMcastMacFwdEntry 2 } 
-- 
-- 
--      igsVlanMcastMacFwdPortList OBJECT-TYPE 
--           SYNTAX      PortList 
--           MAX-ACCESS  read-only 
--           STATUS      current 
--           DESCRIPTION 
--               "List of ports onto which the multicast data
--                packets destined for this group will be forwarded."  
--           ::= { igsVlanMcastMacFwdEntry 3 } 

-- VLAN based router table.
 
      igsVlanRouterTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF IgsVlanRouterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "This table contains the list of ports through which 
              a router, in a particular VLAN is reachable." 
          ::= { igsVlan 3 } 
 
      igsVlanRouterEntry OBJECT-TYPE 
          SYNTAX      IgsVlanRouterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "Contains the VLAN ID and list of ports on which 
              routers are present in the VLAN." 
          INDEX { igsVlanRouterVlanId } 
          ::= { igsVlanRouterTable 1 } 
 
      IgsVlanRouterEntry ::= SEQUENCE { 
          igsVlanRouterVlanId             Integer32,
          igsVlanRouterPortList           PortList
      }
           
      igsVlanRouterVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (1..4094) 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "VLAN ID of the ports through which router is reachable." 
           ::= { igsVlanRouterEntry 1 } 
 
      igsVlanRouterPortList OBJECT-TYPE 
           SYNTAX      PortList 
           MAX-ACCESS  read-only
           STATUS      current 
           DESCRIPTION 
               "List of ports on which routers are present. 
                These router ports are learnt through control messages 
                received from routers, and can also be configured 
                statically." 
           ::= { igsVlanRouterEntry 2 } 
 
-- VLAN based filter table 
 
      igsVlanFilterTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF IgsVlanFilterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "This table contains configuration of snooping
              on specific Vlans. This Table is valid only when VLAN is  
              enabled in the system." 
          ::= { igsVlan 4 } 
 
      igsVlanFilterEntry OBJECT-TYPE 
          SYNTAX      IgsVlanFilterEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "Contains snooping status , version and fast leave
              configuration for a specific VLAN." 
          INDEX { igsVlanFilterVlanId } 
          ::= { igsVlanFilterTable 1 } 
 
      IgsVlanFilterEntry ::= SEQUENCE { 
          igsVlanFilterVlanId           Integer32, 
          igsVlanSnoopStatus            INTEGER, 
          igsVlanQuerier                INTEGER, 
          igsVlanCfgQuerier             INTEGER, 
          igsVlanQueryInterval          Integer32, 
          igsVlanRtrPortList            PortList,
          igsVlanFbdRtrPortList         PortList,
          igsVlanFastLeave              INTEGER
          } 

      igsVlanFilterVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (1..4094) 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
            "Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which 
            the snooping configurations in IgsVlanFilterEntry is to be done." 
           ::= { igsVlanFilterEntry 1 } 
 
      igsVlanSnoopStatus OBJECT-TYPE 
           SYNTAX      INTEGER { enabled(1), disabled(2) } 
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "This object allows you to enable/disable IGS function on a specific VLAN."  
           DEFVAL  { 1 }
           ::= { igsVlanFilterEntry 2 } 

      igsVlanQuerier OBJECT-TYPE 
          SYNTAX      INTEGER  { enabled(1), disabled(2) } 
          MAX-ACCESS  read-only 
          STATUS      current 
          DESCRIPTION 
             "Indicates whether the switch is configured as a querier in the VLAN"
          DEFVAL  { 2 } 
          ::= { igsVlanFilterEntry 3 } 

      igsVlanCfgQuerier OBJECT-TYPE 
          SYNTAX      INTEGER  { enabled(1), disabled(2) } 
          MAX-ACCESS  read-write 
          STATUS      current 
          DESCRIPTION 
             "The snooping switch can be configured as a querier via this object 
              to send out IGMP general queries when IGMP routers are not present in the VLAN. 
              When set to 'enabled', the switch will generate general queries."
          DEFVAL  { 2 } 
          ::= { igsVlanFilterEntry 4 } 

      igsVlanQueryInterval OBJECT-TYPE 
          SYNTAX      Integer32 (60..600) 
          MAX-ACCESS  read-only 
          STATUS      current 
          DESCRIPTION 
             "This is the interval (in seconds) for which the switch 
              sends general queries when it is configured as a querier for 
              the VLAN. A switch should be configured as a querier for a VLAN 
              only when there is no queriers in the network."   
          DEFVAL  { 125 } 
          ::= { igsVlanFilterEntry 5 } 

      igsVlanRtrPortList OBJECT-TYPE 
           SYNTAX      PortList 
           MAX-ACCESS  read-write
           STATUS      current 
           DESCRIPTION 
               "List of ports which are configured statically as router ports"
           ::= { igsVlanFilterEntry 6 } 

      igsVlanFbdRtrPortList OBJECT-TYPE 
           SYNTAX      PortList 
           MAX-ACCESS  read-write
           STATUS      current 
           DESCRIPTION 
               "List of ports which can be configured statically as forbidden router ports."
           ::= { igsVlanFilterEntry 7 }            

      igsVlanFastLeave OBJECT-TYPE 
           SYNTAX      INTEGER { enabled(1), disabled(2) } 
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Enables or disables fast leave for the VLAN. When it is 
                'disabled',on reception of a leave message, the switch checks
                if they are any interested receivers for the group by sending 
                a group specific query before removing the port from the 
                forwarding table. If set to 'enabled', the switch does not 
                send a group specific query and immediately removes the port
                from the forwarding table."
           DEFVAL  { 2 }
           ::= { igsVlanFilterEntry 8 }


    -- VLAN Based IGMP Snooping Group 
 
      igsVlanMulticastGroupTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF IgsVlanMulticastGroupEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
            "This table contains MAC based multicast forwarding 
             information." 
          ::= { igsVlan 5 } 
 
      igsVlanMulticastGroupEntry OBJECT-TYPE 
          SYNTAX      IgsVlanMulticastGroupEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
            "This table contains VLAN ID, multicast group MAC address and the  
             list of ports onto which the multicast data packets for group
             should be forwarded."  

          INDEX { igsVlanMulticastGroupVlanId,
                  igsVlanMulticastGroupIpAddress } 
          ::= { igsVlanMulticastGroupTable 1 } 
 
      IgsVlanMulticastGroupEntry ::= SEQUENCE { 
          igsVlanMulticastGroupVlanId           Integer32,
          igsVlanMulticastGroupIpAddress        InetAddress, 
          igsVlanMulticastGroupMacAddress       MacAddress,
          igsVlanMulticastGroupPortList         PortList
        } 

      igsVlanMulticastGroupVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (1..4094) 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "VLAN ID pertaining to the Multicast forwarding entry"  
           ::= { igsVlanMulticastGroupEntry 1 } 
 
      igsVlanMulticastGroupIpAddress OBJECT-TYPE 
           SYNTAX      InetAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
               "Multicast group IP address. This object indicates that a
                multicast group address was learned in the switch and be represented 
                as IP address format." 
           ::= { igsVlanMulticastGroupEntry 2 } 
 
 
      igsVlanMulticastGroupMacAddress OBJECT-TYPE 
           SYNTAX      MacAddress 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
               "Multicast group MAC address. This object indicates that a
                multicast group address was learned in the switch and be represented 
                as MAC address format." 
           ::= { igsVlanMulticastGroupEntry 3 } 

      igsVlanMulticastGroupPortList OBJECT-TYPE 
           SYNTAX      PortList 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
               "List of ports onto which the multicast data
                packets destined for this group will be forwarded."  
           ::= { igsVlanMulticastGroupEntry 4 } 

      igsAccessAuthTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF IgsAccessAuthEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "This table is used to manage the IGMP Authentication
              function of the switch." 
          ::= { igsAccessAuth 1 } 
 
      igsAccessAuthEntry OBJECT-TYPE 
          SYNTAX      IgsAccessAuthEntry 
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
             "Contains management entities for IGMP Authentication
              function." 
          INDEX { igsAccessAuthPortIndex } 
          ::= { igsAccessAuthTable 1 } 
 
      IgsAccessAuthEntry ::= SEQUENCE { 
          igsAccessAuthPortIndex             Integer32,
          igsAccessAuthState                 INTEGER
      }
           
      igsAccessAuthPortIndex OBJECT-TYPE 
           SYNTAX      Integer32 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The port index of igsAccessAuthTable which 
               indicates the port to be configured." 
           ::= { igsAccessAuthEntry 1 } 
 
      igsAccessAuthState OBJECT-TYPE 
           SYNTAX      INTEGER  { enabled(1), disabled(2) } 
           MAX-ACCESS  read-write
           STATUS      current 
           DESCRIPTION 
               "This object can be configured to set IGMP Authentication
                state to enabled/disabled on each port." 
           ::= { igsAccessAuthEntry 2 }

-- -------------------------------------------------------------
-- groups in the Auth MIB
-- -------------------------------------------------------------
	swAuthenCtrl  OBJECT IDENTIFIER ::= { companyAuthGroup 1 }
-- -----------------------------------------------------------------------------
-- swAuthenCtrl
-- -----------------------------------------------------------------------------

    swAuthStatus OBJECT-TYPE
        SYNTAX INTEGER {
                   enabled(1),
                   disabled(2)
        }
        MAX-ACCESS 			read-write
        STATUS              current
        DESCRIPTION
        "Enable/Disable Static 802.1x."
        ::= { swAuthenCtrl 1 } 

    swAuthMode OBJECT-TYPE
        SYNTAX  INTEGER {
                    portBase(1),
                    macBase(2)
                }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the authentication mode of the device."
        ::= { swAuthenCtrl 2 }

    authProtocol OBJECT-TYPE
        SYNTAX INTEGER {
            authProtocolRadiusEap(1),
            authProtocolLocal(2)
        }
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
            "The authentication method used to authenticate users."
        DEFVAL { authProtocolRadiusEap }
            ::= { swAuthenCtrl 3 }



-- -------------------------------------------------------------
-- groups in the Port Access Control MIB
-- -------------------------------------------------------------
	swAuthPortAccessCtrl  OBJECT IDENTIFIER ::= { companyAuthGroup 2 }
-- -----------------------------------------------------------------------------
-- swAuthPortAccessCtrl
-- -----------------------------------------------------------------------------
    swAuthPortAccessControlTable OBJECT-TYPE
        SYNTAX SEQUENCE OF SwAuthPortAccessControlEntry
        MAX-ACCESS 			not-accessible
        STATUS              current
        DESCRIPTION
        "A table that contains the configuration objects for the
         Authenticator PAE associated with each port.
         An entry appears in this table for each port that may
         authenticate access to itself."
        ::= { swAuthPortAccessCtrl 1 }

    swAuthPortAccessControlEntry OBJECT-TYPE
        SYNTAX              SwAuthPortAccessControlEntry
        MAX-ACCESS 			not-accessible
        STATUS              current
        DESCRIPTION
        "The configuration information for an Authenticator Port."
        INDEX { swAuthAuthConfigPortNumber }
        ::= { swAuthPortAccessControlTable 1 }

    SwAuthPortAccessControlEntry ::= SEQUENCE {
        swAuthAuthConfigPortNumber          INTEGER,
        swAuthAuthQuietPeriod               INTEGER,
        swAuthAuthSuppTimeout               INTEGER,
        swAuthAuthServerTimeout             INTEGER,
        swAuthAuthMaxReq                    INTEGER,
        swAuthAuthTxPeriod                  INTEGER,
        swAuthAuthReAuthPeriod              INTEGER,
        swAuthAuthReAuthentication          INTEGER,
        swAuthAuthConfigPortControl         INTEGER,
        swAuthAuthCapability                INTEGER,
        swAuthAuthDirection                 INTEGER
    }

    swAuthAuthConfigPortNumber   OBJECT-TYPE
        SYNTAX              INTEGER
        MAX-ACCESS 			read-only
        STATUS              current
        DESCRIPTION
        "A unique value for each port that correlates to port index.
         Its value ranges between 1 and the value of port number."
        ::= { swAuthPortAccessControlEntry 1 }

    swAuthAuthQuietPeriod        OBJECT-TYPE
        SYNTAX        INTEGER (0..65535)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value, in seconds, of the quietPeriod constant
           currently in use by the Authenticator PAE state
           machine."
        REFERENCE
           "9.4.1, quietPeriod."
        DEFVAL { 60 }
        ::= { swAuthPortAccessControlEntry 2 }

    swAuthAuthSuppTimeout        OBJECT-TYPE
        SYNTAX        INTEGER (1..65535)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value, in seconds, of the suppTimeout constant
           currently in use by the Backend Authentication state
           machine."
        REFERENCE
           "9.4.1, suppTimeout."
        DEFVAL { 12 }
        ::= { swAuthPortAccessControlEntry 3 }

    swAuthAuthServerTimeout      OBJECT-TYPE
        SYNTAX        INTEGER (1..65535)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value, in seconds, of the serverTimeout constant
           currently in use by the Backend Authentication state
           machine."
        REFERENCE
           "9.4.1, serverTimeout."
        DEFVAL { 16 }
        ::= { swAuthPortAccessControlEntry 4 }

    swAuthAuthMaxReq             OBJECT-TYPE
        SYNTAX        INTEGER (1..10)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value of the maxReq constant currently in use by
           the Backend Authentication state machine."
        REFERENCE
           "9.4.1, maxReq."
        DEFVAL { 2 }
        ::= { swAuthPortAccessControlEntry 5 }

    swAuthAuthTxPeriod           OBJECT-TYPE
        SYNTAX        INTEGER (1..65535)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value, in seconds, of the txPeriod constant
           currently in use by the Authenticator PAE state
           machine."
        REFERENCE
           "9.4.1, txPeriod."
        DEFVAL { 24 }
        ::= { swAuthPortAccessControlEntry 6 }

    swAuthAuthReAuthPeriod       OBJECT-TYPE
        SYNTAX        INTEGER (1..65535)
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The value, in seconds, of the reAuthPeriod constant
           currently in use by the Reauthentication Timer state
           machine."
        REFERENCE
           "9.4.1, reAuthPerio."
        DEFVAL { 3600 }
        ::= { swAuthPortAccessControlEntry 7 }

    swAuthAuthReAuthentication   OBJECT-TYPE
        SYNTAX        INTEGER { enabled(1), disabled(2) }
        MAX-ACCESS 	  read-write
        STATUS        current
        DESCRIPTION
           "The enable/disable control used by the Reauthentication
           Timer state machine (8.5.5.1)."
        REFERENCE
           "9.4.1, reAuthEnable."
        ::= { swAuthPortAccessControlEntry 8 }

    swAuthAuthConfigPortControl  OBJECT-TYPE
       SYNTAX       INTEGER {
                       forceUnauthorized(1),
                       auto(2),
                       forceAuthorized(3)
                   }
        MAX-ACCESS 			read-write
        STATUS              current
        DESCRIPTION
           "The current value of the controlled Port
           control parameter for the Port."
        REFERENCE
           "9.4.1, AuthControlledPortControl."
        ::= { swAuthPortAccessControlEntry 9 }

    swAuthAuthCapability         OBJECT-TYPE
       SYNTAX       INTEGER {
                       authenticator(1),
                       none(2)
                   }
        MAX-ACCESS 			read-write
        STATUS              current
        DESCRIPTION
           "The current value of the controlled Port
           control parameter for the Port."
        REFERENCE
           "AuthCapability."
        ::= { swAuthPortAccessControlEntry 10 }

    swAuthAuthDirection          OBJECT-TYPE
       SYNTAX       INTEGER {
                       both(0),
                       in(1)
                   }
        MAX-ACCESS 			read-write
        STATUS              current
        DESCRIPTION
           "The current value of the controlled Port
           control parameter for the Port."
        REFERENCE
           "AuthDirection."
        ::= { swAuthPortAccessControlEntry 11 }

-- -------------------------------------------------------------
-- groups in the 802.1X Local user MIB
-- -------------------------------------------------------------
	swAuthUser  OBJECT IDENTIFIER ::= { companyAuthGroup 3 }
-- -----------------------------------------------------------------------------
-- swAuthUser
-- -----------------------------------------------------------------------------
    swAuthUserTable OBJECT-TYPE
        SYNTAX SEQUENCE OF SwAuthUserEntry
        MAX-ACCESS 			not-accessible
        STATUS              current
        DESCRIPTION
        "A table that contains the configuration objects for the
         Authenticator PAE associated with each port.
         An entry appears in this table for each port that may
         authenticate access to itself."
        ::= { swAuthUser 1 }

    swAuthUserEntry OBJECT-TYPE
        SYNTAX              SwAuthUserEntry
        MAX-ACCESS 			not-accessible
        STATUS              current
        DESCRIPTION
        "The configuration information for an Authenticator Port."
        INDEX { swAuthUserName }
        ::= { swAuthUserTable 1 }

    SwAuthUserEntry ::= SEQUENCE {
        swAuthUserName                      SnmpAdminString,
        swAuthUserPassword                  DisplayString,
        swAuthUserStatus                    RowStatus
    }

    swAuthUserName OBJECT-TYPE
        SYNTAX      SnmpAdminString (SIZE(1..15))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The unique index value of a row in this table.

            This object is used to set 802.1X Local user name,
            The following characters are allowed to input:
            semicolon, question mark, space, and double quotation mark."
        ::= { swAuthUserEntry 1 }

    swAuthUserPassword  OBJECT-TYPE
       SYNTAX      DisplayString (SIZE(1..15))
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "This object is used to set 802.1X Local user Password,
          The following characters are allowed to input:
          semicolon, question mark, space, and double quotation mark."
       ::= { swAuthUserEntry 2 }

    swAuthUserStatus OBJECT-TYPE
        SYNTAX       RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The status of this conceptual row in the swAuthUserTable.

            An entry in this table is not qualified for activation
            until instances of all corresponding columns have been
            initialized, either through default values, or through
            Set operations.  The swAuthUserName objects must be
            explicitly set."
        ::= { swAuthUserEntry 3 }

-- -------------------------------------------------------------
-- groups in the Authentication RADIUS Server MIB
-- -------------------------------------------------------------
	swAuthRadiusServer  OBJECT IDENTIFIER ::= { companyAuthGroup 4 }
-- -----------------------------------------------------------------------------
-- swAuthRadiusServer
-- -----------------------------------------------------------------------------
    swAuthRadiusServerTable OBJECT-TYPE
        SYNTAX SEQUENCE OF SwAuthRadiusServerEntry
        MAX-ACCESS 			not-accessible
        STATUS              current
        DESCRIPTION
        "A table that contains the configuration objects for the
         Authenticator PAE associated with each port.
         An entry appears in this table for each port that may
         authenticate access to itself."
        ::= { swAuthRadiusServer 1 }

    swAuthRadiusServerEntry                 OBJECT-TYPE
        SYNTAX                              SwAuthRadiusServerEntry
        MAX-ACCESS 			                not-accessible
        STATUS                              current
        DESCRIPTION
        "The configuration information for an Authenticator Port."
        INDEX { swAuthRadiusServerIndex }
        ::= { swAuthRadiusServerTable 1 }

    SwAuthRadiusServerEntry ::= SEQUENCE {
        swAuthRadiusServerIndex                 INTEGER,
        swAuthRadiusServerAddress               IpAddress,
        swAuthRadiusServerAuthenticationPort    INTEGER,
        swAuthRadiusServerAccountingPort        INTEGER,
        swAuthRadiusServerTimeout               INTEGER,
        swAuthRadiusServerRetransmit            INTEGER,
        swAuthRadiusServerKey                   DisplayString,
        swAuthRadiusServerStatus                RowStatus
    }

    swAuthRadiusServerIndex                 OBJECT-TYPE
        SYNTAX                              INTEGER (1..3)
        MAX-ACCESS 			                read-only
        STATUS                              current
        DESCRIPTION
        "A unique value for Authentication RADIUS Server index.
         Its value ranges between 1 and 3."
        ::= { swAuthRadiusServerEntry 1 }

    swAuthRadiusServerAddress               OBJECT-TYPE
        SYNTAX                              IpAddress
        MAX-ACCESS                          read-write
        STATUS                              current
        DESCRIPTION
            "The IP address of the RADIUS server
                     referred to in this table entry."
        ::=  { swAuthRadiusServerEntry 2 }

    swAuthRadiusServerAuthenticationPort    OBJECT-TYPE
        SYNTAX                              INTEGER (1..65535)
        MAX-ACCESS                          read-write
        STATUS                              current
        DESCRIPTION
            "The value is for setting UDP Port."
        DEFVAL { 1812 }
       ::= { swAuthRadiusServerEntry 3 }

    swAuthRadiusServerAccountingPort        OBJECT-TYPE
        SYNTAX                              INTEGER (1..65535)
        MAX-ACCESS                          read-write
        STATUS                              current
        DESCRIPTION
            "The value is for setting UDP Port."
        DEFVAL { 1813 }
       ::= { swAuthRadiusServerEntry 4 }

    swAuthRadiusServerTimeout               OBJECT-TYPE
        SYNTAX                              INTEGER (1..255)
        MAX-ACCESS                          read-write
        STATUS                              current
        DESCRIPTION
            "The value is for setting UDP Port."
        DEFVAL { 5 }
       ::= { swAuthRadiusServerEntry 5 }

    swAuthRadiusServerRetransmit            OBJECT-TYPE
        SYNTAX                              INTEGER (1..255)
        MAX-ACCESS                          read-write
        STATUS                              current
        DESCRIPTION
            "The value is for setting UDP Port."
        DEFVAL { 2 }
       ::= { swAuthRadiusServerEntry 6 }

    swAuthRadiusServerKey                   OBJECT-TYPE
       SYNTAX                               DisplayString (SIZE(1..15))
       MAX-ACCESS                           read-write
       STATUS                               current
       DESCRIPTION
          "This object is used to set 802.1X Radius Server Key,
          The following characters are allowed to input:
          semicolon, question mark, space, and double quotation mark."
       ::= { swAuthRadiusServerEntry 7 }

    swAuthRadiusServerStatus OBJECT-TYPE
        SYNTAX       RowStatus
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION
            "The status of this conceptual row in the 
            swAuthRadiusServerTable.

            An entry in this table is not qualified for activation
            until instances of all corresponding columns have been
            initialized, either through default values, or through
            Set operations.  The swAuthRadiusServerIndex objects 
            must be explicitly set."
        ::= { swAuthRadiusServerEntry 8 }
    -- ------------------------------------------------------------------ 
    -- QoS
    -- ------------------------------------------------------------------

--1--
    cosScheduleMechanism       OBJECT-TYPE 
        SYNTAX INTEGER {
            strictPriority(1),
            wrr(2)
        } 
        MAX-ACCESS    read-write 
        STATUS        current
        DESCRIPTION 
           "Queuing mechanism.
                 strictPriority(1) : Strict Priority
                 wrr(2)            : Weighted Round Robin    
            Strict-priority scheduling is implemented with a special strict-priority scheduler node that is stacked directly above the port. Queues stacked on top of the strict-priority scheduler node always get bandwidth before other queues.   
            Weighted round-robin scheduling is designed to better handle queues with different processing capacities. Each queue has a weight : Low is 1, Medium is 2, High is 4 and Highest is 8 for WS3 spec. Queues with higher weights get bandwidth before than other queues with less weights. 
           " 
        ::= { companyQoSGroup 1 } 

--2--
    cosOutputSchedule     OBJECT IDENTIFIER ::= { companyQoSGroup 2 }
    
    cosClassTable     OBJECT-TYPE
        SYNTAX SEQUENCE OF CosClassEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of cosOutputSchedule."
        ::= { cosOutputSchedule 1 }
        
    cosClassEntry OBJECT-TYPE
        SYNTAX CosClassEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of cosOutputClass Weight."
        INDEX { cosClassIndex }
        ::= { cosClassTable 1 }
        
    CosClassEntry ::= SEQUENCE {
        cosClassIndex                 INTEGER,
        cosWeight              INTEGER
    }
    
    cosClassIndex OBJECT-TYPE
        SYNTAX INTEGER (0..3)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "A index of class 0 ~ 3."
        ::= { cosClassEntry 1 }
        
    cosWeight OBJECT-TYPE 
        SYNTAX INTEGER (1..55)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "cos weight "
        ::= { cosClassEntry 2 }  


    
    -- ------------------------------------------------------------------ 
    -- QoS
    -- ------------------------------------------------------------------ 
    
--3 port priority --
    portMapPriority     OBJECT IDENTIFIER ::= { companyQoSGroup 3 }
    
    portMapPriTable     OBJECT-TYPE
        SYNTAX SEQUENCE OF PortMapPriEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of port mapping priority Entries."
        ::= { portMapPriority 1 }
        
    portMapPriEntry OBJECT-TYPE
        SYNTAX PortMapPriEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of 802.1p port mapping priority priorities."
        INDEX { portMapPriPortIndex }
        ::= { portMapPriTable 1 }
        
    PortMapPriEntry ::= SEQUENCE {
        portMapPriPortIndex                 INTEGER,
        portMapPriClass                 INTEGER
    }
    
    portMapPriPortIndex OBJECT-TYPE
        SYNTAX INTEGER 
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "A port identifier that is in the range of 1 to ifNumber."
        ::= { portMapPriEntry 1 }
        
    portMapPriClass OBJECT-TYPE
        SYNTAX INTEGER {
               low(0),
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "For ingress untagged packets, the per port 'Default Priority'
         setting will be applied to packets of each port to provide 
         port-based traffic prioritization.
         For ingress tagged packets, if 802.1p not enabled 
         D-Link Smart Switches will refer to these 4
         different priority queues. "
        ::= { portMapPriEntry 2 }  

--4 default user priority--
    qosDefaultUserPri     OBJECT IDENTIFIER ::= { companyQoSGroup 4 }
    
    qosDefaultUserPriTable     OBJECT-TYPE
        SYNTAX SEQUENCE OF QosDefaultUserPriEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of 802.1p port default priority Entries."
        ::= { qosDefaultUserPri 1 }
        
    qosDefaultUserPriEntry OBJECT-TYPE
        SYNTAX QosDefaultUserPriEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A list of 802.1p port default priority priorities."
        INDEX { qosDefaultUserPriPortIndex }
        ::= { qosDefaultUserPriTable 1 }
        
    QosDefaultUserPriEntry ::= SEQUENCE {
        qosDefaultUserPriPortIndex      INTEGER,
        qosDefaultPriority              INTEGER,
        qosEffectiveDefaultPriority     INTEGER
    }
    
    qosDefaultUserPriPortIndex OBJECT-TYPE
        SYNTAX INTEGER 
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
             "A port identifier that is in the range of 1 to ifNumber."
        ::= { qosDefaultUserPriEntry 1 }
        
    qosDefaultPriority OBJECT-TYPE
        SYNTAX INTEGER {
               priority0(0),
               priority1(1),    
               priority2(2),    
               priority3(3),
               priority4(4),
               priority5(5),    
               priority6(6),    
               priority7(7) 
    	}
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION
        "For ingress untagged packets, the per port 'Default Priority'
         setting will be applied to packets of each port to provide 
         port-based traffic prioritization when 802.1p is enabled."
        ::= { qosDefaultUserPriEntry 2 }   
        
        
    qosEffectiveDefaultPriority OBJECT-TYPE
        SYNTAX INTEGER {
               priority0(0),
               priority1(1),    
               priority2(2),    
               priority3(3),
               priority4(4),
               priority5(5),    
               priority6(6),    
               priority7(7) 
    	}
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
        "For ingress untagged packets, the per port 'Effective Default 
         Priority' setting will be applied to packets of each port to 
         provide port-based traffic prioritization when 802.1p is enabled."
        ::= { qosDefaultUserPriEntry 3 }  

--5 vlan tag user priority --
    qosUserPriority     OBJECT IDENTIFIER ::= { companyQoSGroup 5 }
    qosUserPriorityTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosUserPriEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table mapping evaluated User Priority to Traffic
             Class, for forwarding by the bridge.  Traffic class is a
             number in the range (0..3)."
        REFERENCE
            "ISO/IEC 15802-3 Table 7-2"
        ::= { qosUserPriority 1 }

    qosUserPriEntry OBJECT-TYPE
        SYNTAX      QosUserPriEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
        "User Priority to Traffic Class mapping."
        INDEX {qosUserPriIndex }
        ::= { qosUserPriorityTable 1 }

    QosUserPriEntry ::=
        SEQUENCE {
            qosUserPriIndex
                INTEGER,
            qosUserPriClass
                INTEGER
        }

    qosUserPriIndex OBJECT-TYPE
        SYNTAX      INTEGER (0..7)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "For ingress tagged packets, D-Link Smart Switches will refer
         to these information and prioritize them with 4 different priority queues. 
         If 802.1p is enabled."

        ::= { qosUserPriEntry 1 }

    qosUserPriClass OBJECT-TYPE
        SYNTAX      INTEGER {
               low(0),
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The User Class the received frame is mapped to."
        ::= { qosUserPriEntry 2 }

--7 priority setting on/off table --
    qosPriSettings     OBJECT IDENTIFIER ::= { companyQoSGroup 7 }
    qosPriSettingsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF QosPriSettingsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A list of port priority settings."
        REFERENCE
            "ISO/IEC 15802-3 Table 7-2"
        ::= { qosPriSettings 1 }

    qosPriSettingsEntry OBJECT-TYPE
        SYNTAX      QosPriSettingsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
        "A list of port priority settings Entries."
        INDEX {qosPriSetPortIndex }
        ::= { qosPriSettingsTable 1 }

    QosPriSettingsEntry ::=
        SEQUENCE {
            qosPriSetPortIndex
                INTEGER,
            qosPriSetPortType
                INTEGER
        }

    qosPriSetPortIndex OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "A port identifier that is in the range of 1 to ifNumber."
        ::= { qosPriSettingsEntry 1 }

    qosPriSetPortType OBJECT-TYPE
        SYNTAX      INTEGER (0..7)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The port priority setting type. (ex. none = 0, port mapping = 1,
             802.1p = 2, DSCP = 4. If you want enable 802.1p & DSCP, the value
             is 2 + 4 = 6. "
        ::= { qosPriSettingsEntry 2 }

    -- ------------------------------------------------------------------ 
    -- QoS
    -- ------------------------------------------------------------------
    qosDiffServ     OBJECT IDENTIFIER ::= { companyQoSGroup 6 }
    

    qosDiffServTypeGroup OBJECT IDENTIFIER ::= { qosDiffServ 1 }
    
    qosDiffServType00 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),
               medium(1),    
               high(2),    
               highest(3) 
    	}
    	MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 0 : IP ToS value = 0"  
        ::= { qosDiffServTypeGroup 1 }
    
    qosDiffServType01 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
    	MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 01 : IP ToS value = 4"  
        ::= { qosDiffServTypeGroup 2 }
        
    qosDiffServType02 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 02 : IP ToS value = 8"  
        ::= { qosDiffServTypeGroup 3 }
    
    qosDiffServType03 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 03 : IP ToS value = 12"  
        ::= { qosDiffServTypeGroup 4 }
        
    qosDiffServType04 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 04 : IP ToS value = 16"  
        ::= { qosDiffServTypeGroup 5 }
    
    qosDiffServType05 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 05 : IP ToS value = 20"  
        ::= { qosDiffServTypeGroup 6 }
        
    qosDiffServType06 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 06 : IP ToS value = 24"  
        ::= { qosDiffServTypeGroup 7 }
    
    qosDiffServType07 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 07 : IP ToS value = 28"  
        ::= { qosDiffServTypeGroup 8 }
        
    qosDiffServType08 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 08 : IP ToS value = 32"  
        ::= { qosDiffServTypeGroup 9 }
    
    qosDiffServType09 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 09 : IP ToS value = 36"  
        ::= { qosDiffServTypeGroup 10 }
        
    qosDiffServType10 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 10 : IP ToS value = 40"  
        ::= { qosDiffServTypeGroup 11 }
    
    qosDiffServType11 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 11 : IP ToS value = 44"  
        ::= { qosDiffServTypeGroup 12 }
        
    qosDiffServType12 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 12 : IP ToS value = 48"  
        ::= { qosDiffServTypeGroup 13 }
    
    qosDiffServType13 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 13 : IP ToS value = 52"  
        ::= { qosDiffServTypeGroup 14 }
        
    qosDiffServType14 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 14 : IP ToS value = 56"  
        ::= { qosDiffServTypeGroup 15 }
    
    qosDiffServType15 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 15 : IP ToS value = 60"  
        ::= { qosDiffServTypeGroup 16 }
        
    qosDiffServType16 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 16 : IP ToS value = 64"  
        ::= { qosDiffServTypeGroup 17 }
    
    qosDiffServType17 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 17 : IP ToS value = 68"  
        ::= { qosDiffServTypeGroup 18 }
        
    qosDiffServType18 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 18 : IP ToS value = 72"  
        ::= { qosDiffServTypeGroup 19 }
    
    qosDiffServType19 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 19 : IP ToS value = 76"  
        ::= { qosDiffServTypeGroup 20 }
        
    qosDiffServType20 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 20 : IP ToS value = 80"  
        ::= { qosDiffServTypeGroup 21 }
    
    qosDiffServType21 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 21 : IP ToS value = 84"  
        ::= { qosDiffServTypeGroup 22 }                                            
        
    qosDiffServType22 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 22 : IP ToS value = 88"  
        ::= { qosDiffServTypeGroup 23 }
    
    qosDiffServType23 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 23 : IP ToS value = 92"  
        ::= { qosDiffServTypeGroup 24 }
        
    qosDiffServType24 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 24 : IP ToS value = 96"  
        ::= { qosDiffServTypeGroup 25 }
    
    qosDiffServType25 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 25 : IP ToS value = 100"  
        ::= { qosDiffServTypeGroup 26 }
        
    qosDiffServType26 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 26 : IP ToS value = 104"  
        ::= { qosDiffServTypeGroup 27 }
    
    qosDiffServType27 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 27 : IP ToS value = 108"  
        ::= { qosDiffServTypeGroup 28 }
        
    qosDiffServType28 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 28 : IP ToS value = 112"  
        ::= { qosDiffServTypeGroup 29 }
    
    qosDiffServType29 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 29 : IP ToS value = 116"  
        ::= { qosDiffServTypeGroup 30 }   
    
    qosDiffServType30 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 30 : IP ToS value = 120"  
        ::= { qosDiffServTypeGroup 31 }
    
    qosDiffServType31 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 31 : IP ToS value = 124"  
        ::= { qosDiffServTypeGroup 32 }
    
    qosDiffServType32 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 32 : IP ToS value = 128"  
        ::= { qosDiffServTypeGroup 33 }
    
    qosDiffServType33 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 33 : IP ToS value = 132"  
        ::= { qosDiffServTypeGroup 34 }
        
    qosDiffServType34 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 34 : IP ToS value = 136"  
        ::= { qosDiffServTypeGroup 35 }
    
    qosDiffServType35 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 35 : IP ToS value = 140"  
        ::= { qosDiffServTypeGroup 36 }
        
    qosDiffServType36 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 36 : IP ToS value = 144"  
        ::= { qosDiffServTypeGroup 37 }
    
    qosDiffServType37 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 37 : IP ToS value = 148"  
        ::= { qosDiffServTypeGroup 38 }
        
    qosDiffServType38 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 38 : IP ToS value = 152"  
        ::= { qosDiffServTypeGroup 39 }
    
    qosDiffServType39 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 39 : IP ToS value = 156"  
        ::= { qosDiffServTypeGroup 40 }
        
    qosDiffServType40 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 40 : IP ToS value = 160"  
        ::= { qosDiffServTypeGroup 41 }
    
    qosDiffServType41 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 41 : IP ToS value = 164"  
        ::= { qosDiffServTypeGroup 42 }
        
    qosDiffServType42 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 42 : IP ToS value = 168"  
        ::= { qosDiffServTypeGroup 43 }
    
    qosDiffServType43 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 43 : IP ToS value = 172"  
        ::= { qosDiffServTypeGroup 44 }
        
    qosDiffServType44 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 44 : IP ToS value = 176"  
        ::= { qosDiffServTypeGroup 45 }
    
    qosDiffServType45 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 45 : IP ToS value = 180"  
        ::= { qosDiffServTypeGroup 46 }
        
    qosDiffServType46 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 46 : IP ToS value = 184"  
        ::= { qosDiffServTypeGroup 47 }
    
    qosDiffServType47 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 47 : IP ToS value = 188"  
        ::= { qosDiffServTypeGroup 48 }
        
    qosDiffServType48 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 48 : IP ToS value = 192"  
        ::= { qosDiffServTypeGroup 49 }
    
    qosDiffServType49 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 49 : IP ToS value = 196"  
        ::= { qosDiffServTypeGroup 50 }
        
    qosDiffServType50 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 50 : IP ToS value = 200"  
        ::= { qosDiffServTypeGroup 51 }
    
    qosDiffServType51 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 51 : IP ToS value = 204"  
        ::= { qosDiffServTypeGroup 52 }
        
    qosDiffServType52 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 52 : IP ToS value = 208"  
        ::= { qosDiffServTypeGroup 53 }
    
    qosDiffServType53 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 53 : IP ToS value = 212"  
        ::= { qosDiffServTypeGroup 54 }                                            
        
    qosDiffServType54 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 54 : IP ToS value = 216"  
        ::= { qosDiffServTypeGroup 55 }
    
    qosDiffServType55 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 55 : IP ToS value = 220"  
        ::= { qosDiffServTypeGroup 56 }
        
    qosDiffServType56 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 56 : IP ToS value = 224"  
        ::= { qosDiffServTypeGroup 57 }
    
    qosDiffServType57 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 57 : IP ToS value = 228"  
        ::= { qosDiffServTypeGroup 58 }
        
    qosDiffServType58 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 58 : IP ToS value = 232"  
        ::= { qosDiffServTypeGroup 59 }
    
    qosDiffServType59 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 59 : IP ToS value = 236"  
        ::= { qosDiffServTypeGroup 60 }
        
    qosDiffServType60 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 60 : IP ToS value = 240"  
        ::= { qosDiffServTypeGroup 61 }
    
    qosDiffServType61 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 61 : IP ToS value = 244"  
        ::= { qosDiffServTypeGroup 62 }     
    
    qosDiffServType62 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 62 : IP ToS value = 248"  
        ::= { qosDiffServTypeGroup 63 }                                 
    
    qosDiffServType63 OBJECT-TYPE
        SYNTAX  INTEGER {
               low(0),    
               medium(1),    
               high(2),    
               highest(3) 
    	}
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION
           "DiffServ Type 63 : IP ToS value = 252"  
        ::= { qosDiffServTypeGroup 64 }  



    -- ------------------------------------------------------------------
    -- aclQosTable
    -- ------------------------------------------------------------------
    qosAclPrioritySettings     OBJECT IDENTIFIER ::= { companyQoSGroup 8 }

    aclQosTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF AclQosEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "A list of priority by acl setting."

        ::= { qosAclPrioritySettings 1 }

    aclQosEntry OBJECT-TYPE
        SYNTAX     AclQosEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "A list of priority by acl setting entry."

        INDEX { aclQosIndex }
        ::= { aclQosTable 1 }

    AclQosEntry  ::= 
            SEQUENCE {
              aclQosIndex          Integer32,
              aclQosType           INTEGER,
              aclQosMACAddr        MacAddress,
              aclQosIPAddr         IpAddress,
              aclQosTCPUDPPort     Integer32,
              aclQosVlanID         Integer32,
              aclQosProtocol       Integer32,
              aclQosAssignClass    INTEGER,
              aclQosStatus         RowStatus
              }
              
    aclQosIndex OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "Index of priority by acl setting." 
        ::= { aclQosEntry  1 }
        
    aclQosType OBJECT-TYPE
       SYNTAX       INTEGER { mac(0), ip(1), tcp(2), udp(3), vlanid(4), protocol(5) }
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "Type of priority by acl setting." 
        ::= { aclQosEntry  2 }

    aclQosMACAddr OBJECT-TYPE 
       SYNTAX      MacAddress 
       MAX-ACCESS  read-write
       STATUS      current 
       DESCRIPTION 
           "Dst MAC of priority by acl setting." 
        ::= { aclQosEntry  3 } 
        
        
    aclQosIPAddr OBJECT-TYPE 
       SYNTAX      IpAddress
       MAX-ACCESS  read-write
       STATUS      current 
       DESCRIPTION 
           "Dst IP of priority by acl setting" 
        ::= { aclQosEntry 4 } 
        
    aclQosTCPUDPPort OBJECT-TYPE
       SYNTAX       Integer32 (1..65535)
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "Dst TCP/UDP port of priority by acl setting" 
        ::= { aclQosEntry  5 }
        
    aclQosVlanID OBJECT-TYPE
       SYNTAX       Integer32 (1..4094)
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "VLAN ID of priority by acl setting" 
        ::= { aclQosEntry  6 }

    aclQosProtocol OBJECT-TYPE
       SYNTAX       Integer32 (1..255)
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "Ip protocol number of priority by acl setting" 
        ::= { aclQosEntry  7 }
        
    aclQosAssignClass OBJECT-TYPE
       SYNTAX       INTEGER  { class0(0), class1(1), class2(2), class3(3) }
       MAX-ACCESS   read-write
       STATUS       current
       DESCRIPTION
         "Be mapped class of priority by acl setting." 
        ::= { aclQosEntry  8 }
        
    aclQosStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
         "Status of priority by acl setting."
       ::= { aclQosEntry 9 }    
 		-- ----------------------------------------------------------
		-- The companyTrafficMgmt Groups
		-- ----------------------------------------------------------      		

        -- Bandwidth Control Group --------------------------------------------- --
		bandwidthCtrlSettings  OBJECT IDENTIFIER ::= { companyTrafficMgmt 1 }
                
        bandwidthCtrlTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF BandwidthCtrlEntry 
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
              "A table to control the rate limiting parameters 
               either for the entire switch or for each interface in the switch."
           ::= { bandwidthCtrlSettings 2 }
        
        bandwidthCtrlEntry OBJECT-TYPE 
           SYNTAX      BandwidthCtrlEntry 
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
              "An entry appears in this table for each physical
               interface in the switch."
           INDEX { bandwidthCtrlIndex }
           ::= { bandwidthCtrlTable 1 }
           
        BandwidthCtrlEntry ::= 
           SEQUENCE { 
              bandwidthCtrlIndex 
                 Integer32, 
              bandwidthCtrlTxThreshold
                 Integer32,
              bandwidthCtrlRxThreshold
                 Integer32             
          }
        
        bandwidthCtrlIndex OBJECT-TYPE 
           SYNTAX      Integer32
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The interface index for which the configuration in this 
               entry applies."
           ::= { bandwidthCtrlEntry 1 }
            
        
        bandwidthCtrlTxThreshold OBJECT-TYPE
           SYNTAX      Integer32 (0 | 64..1024000)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Configures interface Rate Limit (Packet that can be transferred
              on a port at a particular second).
        
              This object's value will take effect on the interface speed. Based
              on the operating speed of the port, the rate limit will be applied.
              This value can also be affected by the metering. A value of zero(0)
              disable rate limiting i.e. sets the port to full speed. The value can 
              be set between 64~102400(Kbits per second) in FE port, 64~1024000
              (Kbits per second) in GE port. 
              (Note: The multiple of 1850 Kbits/sec will be set automatically because
              the resolution of Giga-port Tx bandwidth control is 1850 Kbits/sec.)"
        
           ::= { bandwidthCtrlEntry 2 }        
        
        bandwidthCtrlRxThreshold OBJECT-TYPE 
           SYNTAX      Integer32 (0 | 64..1024000)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Allows to configure the limiting value for the maximum number
               of receive packets that can be transmitted per second over this 
               interface. Setting this object to the value zero disables rate 
               limiting for receive packets on this interface. The value that
               can be set for this object is limited by the underlying hardware. 
               The value can be set between 64~102400(Kbits per second) in FE 
               port,  64~1024000(Kbits per second) in GE port."
        
           ::= { bandwidthCtrlEntry 3}               


        -- Broadcast Storm Control Group --------------------------------------------- --
        
        -- Broadcast Storm Control
		broadcastStormCtrlSettings  OBJECT IDENTIFIER ::= { companyTrafficMgmt 3 }
		
        broadcastStormCtrlGlobalOnOff       OBJECT-TYPE 
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS    read-write 
            STATUS        current
            DESCRIPTION 
           "This object indicates storm control function is enabled or disabled 
            for device.
            When you enable broadcast storm control function,  D-Link Smart 
            Switches will allowed you to limit the number of broadcast packets 
            per second going through device." 
            ::= { broadcastStormCtrlSettings 1 } 
		
        broadcastStormCtrlLimitType       OBJECT-TYPE 
            SYNTAX INTEGER  {
        		 broadcastonly(1),
        		 multicastAndbroadcast(2),
        		 dlfMulticastAndbroadcast(3)
            }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
                "This object indicates storm control function is control broadcast
                packet or multicast packet or dlf packet." 
           ::= { broadcastStormCtrlSettings 2 }
        
        broadcastStormCtrlThreshold       OBJECT-TYPE 
           SYNTAX      Integer32 (0 | 64..1024000)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Allows to configure the limiting value for the maximum number
               of Kbits/sec that can be transmitted per second over this interface. 
               Setting this object to the value zero disables rate limiting on 
               this interface. The value that can be set for this object is 
               limited by the underlying hardware. The limit value must be between 
               64~1024000 and limit value is multiple of 64. 
               (Notice : if the limit value is 0, it means unlimited.)"
               
           DEFVAL  {0}
           ::= { broadcastStormCtrlSettings 3 }
                 
       
       -- Traffic Control Group --------------------------------------------- --
       
       trafficCtrlSettings OBJECT IDENTIFIER ::= { companyTrafficMgmt 4 }
       
	   trafficCtrlTrap OBJECT-TYPE
          SYNTAX INTEGER {
          		none(0),
          		stormOccurred(1),
          		stormCleared(2),
           		both(3)
          }
          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
              "The trap setting of traffic control."
          ::= { trafficCtrlSettings 1 }

       
	   trafficCtrlTable OBJECT-TYPE 
          SYNTAX      SEQUENCE OF TrafficCtrlEntry
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
              "The traffic control table."
          ::= { trafficCtrlSettings 2 }

       trafficCtrlEntry OBJECT-TYPE 
          SYNTAX      TrafficCtrlEntry
          MAX-ACCESS  not-accessible 
          STATUS      current 
          DESCRIPTION 
              "The traffic control entry."
          INDEX { trafficCtrlIndex }
          ::= { trafficCtrlTable 1 }

       TrafficCtrlEntry ::= 
          SEQUENCE { 
             trafficCtrlIndex 
                Integer32, 
             trafficCtrlActionMode
                INTEGER, 
             trafficCtrlType
                INTEGER,
             trafficCtrlThreshold
             	Integer32,
             trafficCtrlCountDown
             	Integer32,
             trafficCtrlTimeInterval
             	Integer32
       }
       
       trafficCtrlIndex OBJECT-TYPE 
           SYNTAX      Integer32 (1..65535)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The traffic control index."
           ::= { trafficCtrlEntry 1 }

        trafficCtrlActionMode OBJECT-TYPE
           SYNTAX INTEGER {
           		drop(0),
           		shutdown(1)
           }
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "The action mode of traffic control."
           ::= { trafficCtrlEntry 2 }
   
   
        trafficCtrlType OBJECT-TYPE
           SYNTAX INTEGER {
           		none(0),
           		b(1),
           		m(2),
           		mb(3),
           		u(4),
           		ub(5),
           		um(6),
           		umb(7)
           }
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "The control type of traffic control.
               (b: Broadcast, m: Multicast, u: Unknown Unicast)"
           ::= { trafficCtrlEntry 3 }

        trafficCtrlThreshold OBJECT-TYPE
           SYNTAX       Integer32 (1..102400)  
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "The threshold of traffic control."
           ::= { trafficCtrlEntry 4 }
 
        trafficCtrlCountDown OBJECT-TYPE
           SYNTAX       Integer32 (0..30)  
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "The count down value of traffic control."
           ::= { trafficCtrlEntry 5 }   
              
        trafficCtrlTimeInterval OBJECT-TYPE
           SYNTAX       Integer32 (5..30)  
           MAX-ACCESS   read-write
           STATUS       current
           DESCRIPTION
               "The time interval of traffic control."
           ::= { trafficCtrlEntry 6 } 
           
       
    -- ------------------------------------------------------------------ 
    -- companySecurity
    -- ------------------------------------------------------------------
    
    -- Trusted Host
    
    securityTrustedHost       OBJECT IDENTIFIER ::= { companySecurity 1 }
    
    trustedHostStatus OBJECT-TYPE 
       SYNTAX      INTEGER {
                      enabled      (1),
                      disabled	   (2)
                   }
       MAX-ACCESS  read-write 
       STATUS      current 
       DESCRIPTION 
           "This object indicates trusted host function is enabled or disabled. 
                When trusted host function is enabled, D-Link Smart Switches will 
                only allow hosts which you trust to access and control the switch.
                Your local host IP Addresses must be one of the IP Addresses to 
                avoid disconnection." 
    
       DEFVAL  { disabled }
       ::= { securityTrustedHost 1 }
    
    
    trustedHostTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF TrustedHostEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "A table to configure trusted host in the system."
       ::= { securityTrustedHost 2 }
    
    trustedHostEntry OBJECT-TYPE
       SYNTAX      TrustedHostEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "Each entry in this table represents rules for particular
            trusted host."
       INDEX { trustedHostIpAddr, trustedHostIpMask }
       ::= { trustedHostTable 1 }
    
    TrustedHostEntry ::=
       SEQUENCE {
          trustedHostIpAddr
             IpAddress,
          trustedHostIpMask
             IpAddress,
          trustedHostRowStatus
             RowStatus
     }
    
    trustedHostIpAddr OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
            "The IP address of host you allow to access to D-Link Smart 
             Switch.
             Your local host IP Addresses must be one of the IP Addresses 
             to avoid disconnection."
       ::= { trustedHostEntry 1 }
    
    trustedHostIpMask OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
            "Used to mask with IP address, it allow you set a subnet as a 
            trusted host entry."        
       ::= { trustedHostEntry 2 }
    
    trustedHostRowStatus OBJECT-TYPE
       SYNTAX      RowStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION
             "The status of an entry in the Trusted Host Table.  Only a subset
             of the rowstatus variables (active, createAndGo, destroy) 
             are available."
       ::= { trustedHostEntry 3 }

    securityARPSpoofPrevent        OBJECT IDENTIFIER ::= { companySecurity 3}

	-- aRPSpoofPrevent Control Table
	
	aRPSpoofPreventTable OBJECT-TYPE 
	   SYNTAX      SEQUENCE OF ARPSpoofPreventEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	      "A table to control ARP Spoofing prevention for the entire 
	       switch or for each interface in the switch."
	   ::= { securityARPSpoofPrevent 1 }
	
	aRPSpoofPreventEntry OBJECT-TYPE 
	   SYNTAX      ARPSpoofPreventEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	       "An entry appears in this table for each interface 
	        in the system."
	   INDEX { aRPSpoofPreventIpAddr }
	   ::= { aRPSpoofPreventTable 1 }
	
	ARPSpoofPreventEntry ::=
	   SEQUENCE {
	      aRPSpoofPreventIpAddr
	         IpAddress,
	      aRPSpoofPreventMacAddress
	         MacAddress,
	      aRPSpoofPreventPortList
	         PortList,
	      aRPSpoofPreventRowStatus
	         RowStatus   
	   }
	 
	 
	aRPSpoofPreventIpAddr OBJECT-TYPE
	   SYNTAX      IpAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	       "Specifies either the Network or Host address from which the switch
	        can be managed.
	        An address 0.0.0.0 indicates 'Any Manager'."
	   ::= { aRPSpoofPreventEntry 1 }
	
	
	aRPSpoofPreventMacAddress OBJECT-TYPE 
	   SYNTAX      MacAddress
	   MAX-ACCESS  read-write
	   STATUS      current 
	   DESCRIPTION 
	      "Ethernet Mac Address."
	      
	   DEFVAL  { '000102030405'h }
	   ::= { aRPSpoofPreventEntry 2 }
	
	aRPSpoofPreventPortList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Specifies the port numbers through which the authorized manager can
	        access the switch. 
	
	        By default the authorized manager is allowed to access the switch 
	        through all the ports.
	
	        If a set of ports are configured in the 'PortList', the manager can
	        access the switch only through the configured ports."
	   ::= { aRPSpoofPreventEntry 3 }
	
	aRPSpoofPreventRowStatus OBJECT-TYPE
	   SYNTAX      RowStatus
	   MAX-ACCESS  read-create
	   STATUS      current
	   DESCRIPTION
	      "This object indicates the status of this entry."
	   ::= { aRPSpoofPreventEntry 4 }

                      
    -- ------------------------------------------------------------------ 
    -- companySecurity
    -- ------------------------------------------------------------------
    
    securitySSL       OBJECT IDENTIFIER ::= { companySecurity 5 }

    sslSecurityHttpStatus OBJECT-TYPE 
       SYNTAX       INTEGER {
                    enable(1),
                    disable(2)
                    }
       MAX-ACCESS  read-write 
       STATUS      current 
       DESCRIPTION 
          "This object is for enabling or disabling secure HTTP in the system."
    
       DEFVAL  { disable } 
       ::= { securitySSL 1 }
       
    sslCiphers                  OBJECT IDENTIFIER ::= { securitySSL 2 }
       
    sslCipherSuiteList OBJECT-TYPE
      SYNTAX  BITS {
            rsa-null-md5(0),
            rsa-null-sha(1),
            rsa-des-sha(2),
            rsa-3des-sha(3),
            dh-rsa-des-sha(4),
            dh-rsa-3des-sha(5),
            rsa-exp1024-des-sha(6)
     }

      MAX-ACCESS read-write
      STATUS current
      DESCRIPTION
      
         "This object is to configure the cipher-suites list."

   ::= { sslCiphers 1}
   

                      
    -- ------------------------------------------------------------------ 
    -- companySecurity
    -- ------------------------------------------------------------------
    
    securitySSH       OBJECT IDENTIFIER ::= { companySecurity 8 }
       
    sshSecurityStatus  OBJECT-TYPE
    SYNTAX      INTEGER {
                enable(1),
                disable(2)
                } 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is for enabling or disabling ssh in the system."
    
    DEFVAL  { disable }
    ::= { securitySSH 1}
  
sshMaxAuthFailAttempts OBJECT-TYPE
	SYNTAX INTEGER (2..20)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates the max auth fail retry attempt times."
	::= {securitySSH 2}

sshSessionKeyRekeying OBJECT-TYPE
	SYNTAX INTEGER {
		never(0),
		ten-min(10),
		thirty-min(30),
		sixty-min(60)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates one SSH session rekey time interval."
	::= {securitySSH 3}

sshMaxSession OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates max SSH session number supported in system."
	::= {securitySSH 4}

sshConnectionTimeout OBJECT-TYPE
	SYNTAX INTEGER (120..600)
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"This object indicates SSH connection timeout value."
	::= {securitySSH 5}

--************************************************************************	
-- SSH encryption algorithm group configuration
--************************************************************************
sshAuthenMethodPassWordAdmin OBJECT-TYPE
	SYNTAX INTEGER {
                enable(1),
                disable(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The object indicates authen method password is enabled or disabled."
	::= {securitySSH 6}

sshAuthenMethodPubKeyAdmin OBJECT-TYPE
	SYNTAX INTEGER {
                enable(1),
                disable(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The object indicates authen method public-key is enabled or disabled."
	::= {securitySSH 7}	

sshAuthenMethodHostKeyAdmin OBJECT-TYPE
	SYNTAX INTEGER {
                enable(1),
                disable(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The object indicates authen method host-key is enabled or disabled."
	::= {securitySSH 8}

    sshCipherSuiteList OBJECT-TYPE
        SYNTAX  BITS {
        tripleDESCBC(0),
        dESCBC(1)
        }
     
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
      
    "This object is to configure the cipher-suites list."
          
	::= { securitySSH 9}
    
    sshMacSuiteList OBJECT-TYPE
        SYNTAX  BITS {
            hMAC-SHA1(0),
            hMAC-MD5(1)
        }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION

    "This object is to configure the MAC-list."
            
	::= { securitySSH 10}


sshPublKeyRSAAdmin OBJECT-TYPE
	SYNTAX INTEGER {
		enabled(1),	
		disabled(2)
		}
	MAX-ACCESS read-write
	STATUS current
	DESCRIPTION
		"The object indicates Public key generating algorithm RSA is enabled or disabled."
	::= {securitySSH 11}

--************************************************************************	
-- SSH User Auth Info.
--************************************************************************
	    sshUserInfoTable OBJECT-TYPE
	       SYNTAX      SEQUENCE OF SshUserInfoEntry
	       MAX-ACCESS  not-accessible
	       STATUS      current
	       DESCRIPTION
	           "A table to configure SSH user auth in the system."
	       ::= { securitySSH 12 }
	    
	    sshUserInfoEntry OBJECT-TYPE
	       SYNTAX      SshUserInfoEntry
	       MAX-ACCESS  not-accessible
	       STATUS      current
	            DESCRIPTION
	                "An entry to configure user auth in the system."     
	       INDEX { sshUserInfoID }
	       ::= { sshUserInfoTable 1 }      
	       
	    SshUserInfoEntry ::=
	       SEQUENCE { 
	          	sshUserInfoID   		Integer32,      
	          	sshUserInfoUserName		DisplayString,
	          	sshUserInfoAuth         INTEGER,          	          	
	            sshUserInfoHostName		DisplayString,
	            sshUserInfoHostIp		IpAddress            
	     } 
	
	    sshUserInfoID OBJECT-TYPE 
	       SYNTAX      Integer32 (1..8)
	       MAX-ACCESS  read-only 
	       STATUS      current 
	            DESCRIPTION
	                "The Schedule identifier. The maximum number of Schedule entry is 
                     the number of ports supported PoE function.
	                 The value must be between 1 and 8."
	       ::= { sshUserInfoEntry 1 }
	    
	    sshUserInfoUserName OBJECT-TYPE 
	       SYNTAX      DisplayString (SIZE(1..20))
	       MAX-ACCESS  read-only 
	       STATUS      current 
	            DESCRIPTION
	                "The ssh user name associated with the SSH suer Info. entry (e.g., `admin, user')."
	       ::= { sshUserInfoEntry 2}	       

		sshUserInfoAuth OBJECT-TYPE
			SYNTAX INTEGER {
			    publickey(4),
				password(2),				
				hostbased(1)
				}
			MAX-ACCESS read-write
			STATUS current
			DESCRIPTION
				"The object indicates which auth used by the user."
			::= {sshUserInfoEntry 3}	       

	    sshUserInfoHostName OBJECT-TYPE 
	       SYNTAX      DisplayString (SIZE(1..20))
	       MAX-ACCESS  read-write 
	       STATUS      current 
	            DESCRIPTION
	                "The ssh host name associated with the SSH suer Info. entry (e.g., `DUT1, DUT2')."
	       ::= { sshUserInfoEntry 4}
	         
		sshUserInfoHostIp  OBJECT-TYPE
			SYNTAX      IpAddress
			MAX-ACCESS  read-write
			STATUS      current
			DESCRIPTION 
			  "SSH HostBased IP Address of the system."
			::= { sshUserInfoEntry 5 }
			
 -- ----------------------------------------------------------
 -- The companySecurity Groups
 -- ----------------------------------------------------------      	
    securityPortSecurity                  OBJECT IDENTIFIER ::= { companySecurity 2 }
 -- Port Security Group --------------------------------------------- --
    
    portSecTable     OBJECT-TYPE
        SYNTAX SEQUENCE OF PortSecEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table to control port security features of the device."
        ::= { securityPortSecurity 1 }
        
    portSecEntry OBJECT-TYPE
        SYNTAX PortSecEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry appears in port security table for each interface 
 	        in the system."
        INDEX { portSecIndex }
        ::= { portSecTable 1 }
  
    PortSecEntry ::= 
           SEQUENCE { 
              portSecIndex 
                 Integer32, 
              portSecState 
                 INTEGER, 
              portSecMLA 
                 Integer32             

-- start DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
              ,
              portSecLockAddrMode
                 INTEGER
-- end DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
          }
        
               
         portSecIndex OBJECT-TYPE 
           SYNTAX      Integer32 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The interface index for which the configuration in this 
               entry applies."
           ::= { portSecEntry 1 }
            
        
         portSecState OBJECT-TYPE
           SYNTAX INTEGER  {
        		  enabled (1), disabled (2)
            }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Enable / disable port security admin state for the interface.
              
              A given ports' dynamic MAC address learning will be stopped such
              that the current source MAC addresses entered into the MAC address
              forwarding table can not be changed once the port security admin 
              state is enabled."
        
           ::= { portSecEntry 2 }
        
        
        portSecMLA OBJECT-TYPE 
           SYNTAX      Integer32 (0..64)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Configures interface port security maximum learning address
               numbers.
                              
               When given ports' admin state is enabled, allows forwarding 
               table learning address number. The number can be set 0 to 64.
               Note: Set value 0 means cannot learn MAC address."
        
           ::= {portSecEntry 3}

-- start DLINK_METRO_LIKE_LOCK_ADDRESS_MODE
         portSecLockAddrMode OBJECT-TYPE
           SYNTAX INTEGER  {
                            deleteOnReset (1), 
                            deleteOnTimeout (2),
                            permanent(3)
	}
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "Configures port security lock address mode for the interface.

              deleteOnReset : The locked addresses will not age out until the Switch has been reset.
              deleteOnTimeout : The locked addresses will age out after the aging timer expires.
              Permanent : The locked addresses will not age out after the aging timer expires."

           ::= { portSecEntry 4 }

    portSecFDBPermanentTable     OBJECT-TYPE
        SYNTAX SEQUENCE OF PortSecFDBPermanentEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "A table to control port security FDB Permanent of the device."
        ::= { securityPortSecurity 2 }

    portSecFDBPermanentEntry OBJECT-TYPE
        SYNTAX PortSecFDBPermanentEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "An entry appears in port security table for each interface 
 	        in the system."
        INDEX { portSecFDBPermPort, portSecFDBPermIndex}
        ::= { portSecFDBPermanentTable 1 }
  
    PortSecFDBPermanentEntry ::= 
           SEQUENCE { 
	    portSecFDBPermIndex		INTEGER,
            portSecFDBPermVlanID        INTEGER,
            portSecFDBPermMac           MacAddress,
            portSecFDBPermPort          INTEGER
          }

        portSecFDBPermIndex OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The index of the port security MAC entry."
            ::= { portSecFDBPermanentEntry 1 }

        portSecFDBPermVlanID OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The VLAN ID of the port security MAC entry."
            ::= { portSecFDBPermanentEntry 2 }

         portSecFDBPermMac OBJECT-TYPE
           SYNTAX MacAddress
           MAX-ACCESS read-only
           STATUS current
           DESCRIPTION
               "The MAC address associated of the port security MAC entry."
           ::= { portSecFDBPermanentEntry 3 }

        portSecFDBPermPort OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-only
            STATUS current
            DESCRIPTION
                "The forwarding port of the port security MAC entry."
            ::= { portSecFDBPermanentEntry 4 }
        
-- end DLINK_METRO_LIKE_LOCK_ADDRESS_MODE

    -- ------------------------------------------------------------------ 
    -- companyACLGroup
    -- ------------------------------------------------------------------

        -- ACL Profile Group --------------------------------------------------
        aclProfile       OBJECT IDENTIFIER ::= { companyACLGroup 1 }
        
        aclProfileTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF AclProfileEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " A table to ACL profile .
               "
           ::= { aclProfile 1 }
        
        aclProfileEntry OBJECT-TYPE 
           SYNTAX      AclProfileEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " Each entry in this table is a ACL profile.
                 Index to the table is ACL profile ID. "
           INDEX { aclProfileNo}
           ::= { aclProfileTable 1 }
           
        AclProfileEntry ::= 
           SEQUENCE { 
              aclProfileNo 
                 Integer32, 
              aclProfileType 
                 INTEGER, 
              aclProfileRuleCount 
                 Integer32,  
              aclProfileMask 
                 OCTET STRING,
              aclProfileDstMacAddrMask 
                 MacAddress,          
              aclProfileSrcMacAddrMask 
                 MacAddress,         
              aclProfileIPProtocol  
                 INTEGER, 
              aclProfileIPProtocolMask  
                 OCTET STRING,  
              aclProfileDstIpAddrMask 
                 IpAddress, 
              aclProfileSrcIpAddrMask 
                 IpAddress,
              aclProfileDstPortMask
                 OCTET STRING,         
              aclProfileSrcPortMask
                 OCTET STRING,       
              aclProfileArpSenderMacAddrMask
                 MacAddress,      
              aclProfileArpSenderIpAddrMask
                IpAddress,
              aclProfileStatus
                 RowStatus
          }
        
        aclProfileNo OBJECT-TYPE 
           SYNTAX      Integer32 (1..50)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
               and the ID more than 50 is reserved for system-defined ACL.
               The user only allow to create user-defined ACL ID.
               And system-defined ACL is read only."
           ::= { aclProfileEntry 1 }
        
        aclProfileType OBJECT-TYPE 
           SYNTAX   INTEGER  {
                          l2 (1),
                          l3 (2),
                          arpSP_permit(4),
                          arpSP_deny(5),
                          voiceVlan(6)
                       }
           MAX-ACCESS   read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile type, possible value are
              l2 (1) - for MAC-based rule, 
              l3 (2) - for IPv4-based rule,
              arpSP_permit(4) - for ARP Spoofing prevention entry,
              arpSP_deny(5) - for ARP Spoofing prevention entry,
              voiceVlan(6) - for Voice VLAN OUI entry.
              Note that only l2 and l3 could be set by user, 
              other is reserved for system to show information.
              "
           ::= { aclProfileEntry 2 }
        
        aclProfileRuleCount  OBJECT-TYPE 
           SYNTAX   Integer32 (0..65535)
           MAX-ACCESS   read-only 
           STATUS      current 
           DESCRIPTION 
              "The number of rules in this profile."
           ::= { aclProfileEntry 3 }
              
              
        aclProfileMask OBJECT-TYPE 
           SYNTAX   OCTET STRING
           MAX-ACCESS   read-write  
           STATUS      current 
           DESCRIPTION 
              "Indicate which field want to care in the packet.
               Turn on the following bits to select the following items
               Type        Item                   BIT         
               ------------------------------------------
               L2          DST_MAC                0 (LSB)        
               L2          SRC_MAC                1         
               L2          VID                    2         
               L2          8021P_PRIORITY         3         
               L2          ETHER_TYPE             4         
               L3          DSCP                   5         
               L3          ICMP_TYPE              6         
               L3          ICMP_CODE              7         
               L3          IGMP_TYPE              8         
               L3          DST_IP                 9         
               L3    	   SRC_IP                 10        
               L3    	   DST_PORT               11        
               L3          SRC_PORT               12        
               L3          TCPFLAG                13  
               ARP-SP      ARP_SENDER_MAC         14        
               ARP-SP      ARP_SENDER_IP          15 (MSB)
               -------------------------------------------
               
               The value is in Hex format.
              "
           ::= { aclProfileEntry 4 }      
       

        aclProfileDstMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile destination MAC address mask.
               If DST_MAC is turn on in aclProfileMask, 
               it will work with its member rule field,aclL2RuleDstMacAddr, 
               to caculate a range of MAC address which is really care.
              "
           ::= { aclProfileEntry 5 }
        
        
        aclProfileSrcMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile source MAC address mask.
               If SRC_MAC is turn on in aclProfileMask, 
               it will work with its member rule field,aclL2RuleSrcMacAddr, 
               to caculate a range of MAC address which is really care.
              "
           ::= { aclProfileEntry 6 }
        
        
        aclProfileIPProtocol OBJECT-TYPE 
           SYNTAX   INTEGER  {  
                         none(0),   
           				 icmp(1),
           				 igmp(2),
           				 tcp(6),
          				 udp(17)
                         ,ipMask(255)
                        }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Indicate which IP Protocol will be care in this profile.
               Only profile type is l3 can set the IP protocol.
               For others, this field will be none.
              "
           ::= { aclProfileEntry 7 } 
        aclProfileIPProtocolMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile IP protocol mask.
               If aclProfileIPProtocol set to ipMask, this field will be refered.
               It will work with its member rule field,aclL3RuleProtocol, 
               to caculate a range of IP protocol which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FF'h }   
           ::= { aclProfileEntry 8 }
        aclProfileDstIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile destination IP address mask.
               If DST_IP is turn on in aclProfileMask, 
               it will work with its member rule field,aclL3RuleDstIpAddr, 
               to caculate a range of IP address which is really care.
               The value is in HEX format, for example:
               '255.255.255.0' is presented to 'FFFFFF00'
              "
           DEFVAL  { 'FFFFFFFF'h }
           ::= { aclProfileEntry 9 }
        
        
        aclProfileSrcIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile source IP address mask.
               If SRC_IP is turn on in aclProfileMask, 
               it will work with its member rule field,aclL3RuleSrcIpAddr, 
               to caculate a range of IP address which is really care.
               The value is in HEX format, for example:
               '255.255.255.0' is presented to 'FFFFFF00'
              "
           DEFVAL  { 'FFFFFFFF'h }
           ::= { aclProfileEntry 10 }
        
        aclProfileDstPortMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile UDP/TCP destination port mask.
               If DST_PORT is turn on in aclProfileMask, 
               it will work with its member rule field,aclL3RuleTcpUdpDstPort, 
               to caculate a range of destination port which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFF'h }   
           ::= { aclProfileEntry 11 }
           
        
        aclProfileSrcPortMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile UDP/TCP source port mask.
               If SRC_PORT is turn on in aclProfileMask, 
               it will work with its member rule field,aclL3RuleTcpUdpSrcPort, 
               to caculate a range of source port which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFF'h }     
           ::= { aclProfileEntry 12 }   
        aclProfileArpSenderMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile Sender MAC mask.
               This is only for ARP Spoofing Prevention which is System-defined ACL,
               and it's not allow to modify.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFFFFFFFF'h }
           ::= { aclProfileEntry 13 }
        
        aclProfileArpSenderIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The ACL Profile Sender IP mask.
               This is only for ARP Spoofing Prevention which is System-defined ACL,
               and it's not allow to modify.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFFFFFF'h }
           ::= { aclProfileEntry 14 }
        aclProfileStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
               " This object indicates the status of this entry, can only be set to
                 'createAndWait','active' and 'destroy'. 
                 When the value of the entry status is 'createAndWait', it could be 
                 set to 'active' only if the three values of aclProfileType,
                 aclProfileMask and ProtocolType are not conflicted.
               "
        
           ::= { aclProfileEntry 15 }



        -- ------------------------------------------------------------------ 
        -- L2 Filter Group --------------------------------------------------
        aclL2Rule       OBJECT IDENTIFIER ::= { companyACLGroup 2 }

        aclL2RuleTable OBJECT-TYPE 
        
           SYNTAX      SEQUENCE OF AclL2RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               "A table to configure L2 filter rules in the system."
           ::= { aclL2Rule 1 }
        
        aclL2RuleEntry OBJECT-TYPE 
           SYNTAX      AclL2RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               "Each entry in this table is a L2 filter rule.
               Index to the table is the L2 filter number and Profile ID."
           INDEX { aclL2AccessID, aclL2ProfileID}
           ::= { aclL2RuleTable 1 }
           
        AclL2RuleEntry ::= 
           SEQUENCE { 
              aclL2AccessID 
                 Integer32,        
              aclL2ProfileID 
                 Integer32, 
              aclL2RuleEtherType 
                 Integer32, 
              aclL2RuleDstMacAddr 
                 MacAddress, 
              aclL2RuleSrcMacAddr 
                 MacAddress, 
              aclL2RuleVlanId 
                 Integer32,
              aclL2Rule1pPriority
                 Integer32,
              aclL2RuleDstMacAddrMask 
                 MacAddress, 
              aclL2RuleSrcMacAddrMask 
                 MacAddress,   
              aclL2RuleInPortList 
                 PortList,
              aclL2RuleAction 
                 INTEGER, 
              aclL2RuleRateLimit 
                 Unsigned32, 
              aclL2RuleReplaceDSCP 
                 Integer32, 
              aclL2RuleStatus
                 RowStatus      
          }
        
        aclL2AccessID OBJECT-TYPE 
           SYNTAX      Integer32 (1..65535)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "L2 Filter rule ID."
           ::= { aclL2RuleEntry 1 }
            
        aclL2ProfileID OBJECT-TYPE 
           SYNTAX      Integer32 (1..50)
           MAX-ACCESS  read-only  
           STATUS      current 
           DESCRIPTION 
              "ACL Profile ID which this rule join."
           DEFVAL  { 1 }
           ::= { aclL2RuleEntry 2 }
           
        aclL2RuleEtherType OBJECT-TYPE 
           SYNTAX      Integer32  (-1 | 1501..65535)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The value in the Type/Len field of a frame that will
              be matched to trigger this filter. The default value of
              this object is '-1', which means the rule don't care this 
              condition."
           DEFVAL  { -1 }
           ::= { aclL2RuleEntry 3 }
                      
        aclL2RuleDstMacAddr OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Destination MAC address to be matched with the packet. By Default, the
               Destination Mac Address will be zero,which means the rule don't care this 
               condition." 
           ::= { aclL2RuleEntry 4 }
        
        aclL2RuleSrcMacAddr OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Source MAC address to be matched with the packet. By Default, the Source 
               Mac Address will be zero, which means the rule don't care this condition..
               address"
           ::= { aclL2RuleEntry 5 }
                
        aclL2RuleVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (-1..4094)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
              be treated as customer Vlan Id. By Default, the value will be '-1', 
              which means the rule don't care this condition."
           DEFVAL  { -1 }
           ::= { aclL2RuleEntry 6 }        
         
         aclL2Rule1pPriority OBJECT-TYPE 
           SYNTAX      Integer32  (-1..7)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "802.1p priority to be matched with the packet. By Default, the value
              will be '-1', which means the rule don't care this condition."
          DEFVAL  { -1 }
           ::= { aclL2RuleEntry 7 }   
        
        aclL2RuleDstMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The MAC address Mask work for Destination MAC address.
              This field is read-only and copy from it's Profile setting."
              
           ::= { aclL2RuleEntry 8 }
        
        aclL2RuleSrcMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The MAC address Mask work for Source MAC address.
              This field is read-only and copy from it's Profile setting."
        
           ::= { aclL2RuleEntry 9 } 
                           
        aclL2RuleInPortList OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the complete set of ports over which this filter is applied
               for packets ingress at ports in this list." 
           ::= { aclL2RuleEntry 10 }
        
        aclL2RuleAction OBJECT-TYPE 
           SYNTAX      INTEGER {
                          allow (1)
                          ,drop  (2)
                          ,mirror (3)
                          ,rateLimit(4)
                          ,replaceDSCP(5)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the action to be taken on the packet if the filter
              rule matches.
              If the action is 'allow', the packet will be forwarded according
              to the forwarding rules.
              If the action is 'drop', the packet will be discarded."
           DEFVAL  { allow } 
           ::= { aclL2RuleEntry 11 }
         aclL2RuleRateLimit OBJECT-TYPE 
           SYNTAX      Unsigned32
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Rate limit for matched packet."
        
           ::= { aclL2RuleEntry 12 }
          aclL2RuleReplaceDSCP OBJECT-TYPE 
           SYNTAX      Integer32  (-1..63)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Replace DSCP for matched packet."
        
           ::= { aclL2RuleEntry 13 }
         aclL2RuleStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
                "This object indicates the status of this entry. An entry is
                created in this table when this object is SET to 'createAndWait'.
                The entry in this table is used when the status of this object 
                is SET 'active'. The entry in this table is not used when this 
                object is SET 'notInService'. An entry created in this table is
                be deleted when this object is SET 'destroy'."
           ::= { aclL2RuleEntry 14 }    

        -- ------------------------------------------------------------------ 
        -- L3 Filter Group --------------------------------------------------
        aclL3Rule       OBJECT IDENTIFIER ::= { companyACLGroup 3 }
         
        aclL3RuleTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF AclL3RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " A table to configure L3 filter rules in the system.
               "
           ::= { aclL3Rule 1 }
        
        aclL3RuleEntry OBJECT-TYPE 
           SYNTAX      AclL3RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " Each entry in this table is a L3 filter rule.
                 Index to the table is L3 filter number and Profile ID."
           INDEX { aclL3RuleAccessID, aclL3RuleProfileNo}
           ::= { aclL3RuleTable 1 }
           
        AclL3RuleEntry ::= 
           SEQUENCE { 
              aclL3RuleAccessID 
                 Integer32, 
              aclL3RuleProfileNo 
                 Integer32,
              aclL3RuleProtocol  
                 INTEGER, 
              aclL3RuleProtocolMask  
                 OCTET STRING, 
              aclL3RuleICMPMessageType 
                 Integer32, 
              aclL3RuleICMPMessageCode 
                 Integer32, 
              aclL3RuleDstIpAddr 
                 IpAddress, 
              aclL3RuleSrcIpAddr 
                 IpAddress, 
              aclL3RuleDstIpAddrMask 
                 IpAddress, 
              aclL3RuleSrcIpAddrMask 
                 IpAddress,
              aclL3RuleTcpUdpDstPort
                 Integer32, 
              aclL3RuleTcpUdpSrcPort
                 Integer32, 
              aclL3RuleTcpUdpDstPortMask
                OCTET STRING,         
              aclL3RuleTcpUdpSrcPortMask
                OCTET STRING,         
              aclL3RuleTcpAckBit
                 INTEGER,
              aclL3RuleTcpRstBit
                 INTEGER,
              aclL3RuleTcpUrgBit
                 INTEGER,
              aclL3RuleTcpPshBit
                 INTEGER,
              aclL3RuleTcpSynBit
                 INTEGER,
              aclL3RuleTcpFinBit
                 INTEGER,
              aclL3RuleDscp
                 Integer32,
              aclL3RuleIgmpType
                 Integer32,
              aclL3RulePortList 
                 PortList,
              aclL3RuleAction 
                 INTEGER, 
              aclL3RuleRateLimit 
                 Unsigned32,
              aclL3RuleReplaceDSCP 
                 Integer32,
              aclL3RuleStatus
                 RowStatus         
          }
        
        aclL3RuleAccessID OBJECT-TYPE 
           SYNTAX      Integer32 (1..65535)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "L3 Filter rule ID."
           ::= { aclL3RuleEntry 1 }
            
        aclL3RuleProfileNo OBJECT-TYPE 
           SYNTAX      Integer32 (1..50)
           MAX-ACCESS  read-only  
           STATUS      current 
           DESCRIPTION 
              "The Profile ID which this rule join."
           ::= { aclL3RuleEntry 2 }
              
        aclL3RuleProtocol OBJECT-TYPE 
           SYNTAX      INTEGER  {     
           				 icmp(1),
           				 igmp(2),
           				 tcp(6),
          				 udp(17)
                        } 
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              " The type of protocol to be checked against the packet."
           ::= { aclL3RuleEntry 3 }
           
        aclL3RuleProtocolMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP protocol mask.
               This field is read-only and copy from it's Profile setting.
               It will work with the other field,aclL3RuleProtocol, 
               to caculate a range of IP protocol which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FF'h }   
           ::= { aclL3RuleEntry 4 }

        aclL3RuleICMPMessageType OBJECT-TYPE 
           SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
             " The message type to be checked against the packet. If the
              message type matches with the packet, then the packet will be
              dropped / allowed based on the action set in aclL3RuleAction.
              The default value is '-1',which means the rule don't care this 
              condition.
              Some ICMP message types are: 
                   echoReply(0),
                   destinationUnreachable(3),
                   sourceQuench(4),
                   redirect(5),
                   echoRequest(8),
                   timeExceeded(11),
                   parameterProblem(12),
                   timestampRequest(13),
                   timestampReply(14),
                   informationRequest(15),
                   informationReply(16),
                   addressMaskRequest(17),
                   addressMaskReply (18),
              "
           DEFVAL  { -1 }
           ::= { aclL3RuleEntry 5 }
        
        aclL3RuleICMPMessageCode OBJECT-TYPE 
           SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              " The message code to be checked against the packet. If the
              packet matches with the message code, then the packet will
              be dropped / allowed based on the action set in aclL3RuleAction.
              The default value is '-1', which means the rule don't care this 
              condition.
              Some ICMP message codes are :
                   networkUnreachable(0),
                   hostUnreachable(1),
                   protocolUnreachable(2),
                   portUnreachable(3),
                   fragmentNeed(4),
                   sourceRouteFail(5),
                   destNetworkUnknown(6),
                   destHostUnknown(7),
                   srcHostIsolated(8),
                   destNetworkAdminProhibited(9),
                   destHostAdminProhibited(10),
                   networkUnreachableTOS(11),
                   hostUnreachableTOS(12),
              "
           DEFVAL   { -1 }
           ::= { aclL3RuleEntry 6 }     
        
        aclL3RuleDstIpAddr OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Destination IP address to be matched with the packet.
               The default value will be zero, which means the rule 
               don't care this condition."
           DEFVAL  { '00000000'h }
           ::= { aclL3RuleEntry 7 }
        
        aclL3RuleSrcIpAddr OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Source IP address to be matched with the packet.
              The default value will be zero, which means the 
              rule don't care this condition."

           DEFVAL  { '00000000'h }
           ::= { aclL3RuleEntry 8 }
        
        aclL3RuleDstIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP subnet mask for Destination IP address.
               This field is read-only and copy from it's Profile setting.
              "
           
           DEFVAL  { 'FFFFFFFF'h }
           ::= { aclL3RuleEntry 9 }
        
        aclL3RuleSrcIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP subnet mask for Source IP address.
               This field is read-only and copy from it's Profile setting.
              "
           
           DEFVAL  { 'FFFFFFFF'h }
           ::= { aclL3RuleEntry 10 }
        
        aclL3RuleTcpUdpDstPort OBJECT-TYPE
           SYNTAX      Integer32 (-1..65535)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The TCP / UDP destination port. The default value is -1, 
              which means the rule don't care this condition."
           DEFVAL   { -1 }
           ::= { aclL3RuleEntry 11 }
        
        aclL3RuleTcpUdpSrcPort OBJECT-TYPE
           SYNTAX      Integer32 (-1..65535)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The TCP / UDP source port. The default value is -1, 
              which means the rule don't care this condition."
           DEFVAL   { -1 }
           ::= { aclL3RuleEntry 12 }
           
        aclL3RuleTcpUdpDstPortMask OBJECT-TYPE
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The TCP / UDP Destination port Mask.
               This field is read-only and copy from it's Profile setting.
              "
           ::= { aclL3RuleEntry 13 }
        
        aclL3RuleTcpUdpSrcPortMask OBJECT-TYPE
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The TCP / UDP Source port Mask.
               This field is read-only and copy from it's Profile setting.
              "
           ::= { aclL3RuleEntry 14 } 
           
        aclL3RuleTcpAckBit		OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP ACK bit to be checked against the packet. The default 
        		value is 'dont_care'(-1), which means the rule don't care this 
        		condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 15 }
        
        aclL3RuleTcpRstBit	 OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP RST bit to be checked against the packet. The default 
        		value is 'dont_care'(-1), which means the rule don't care this 
        		condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 16 }
        
        aclL3RuleTcpUrgBit	 OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP Urg bit to be checked against the packet. The default 
        		value is 'dont_care'(-1), which means the rule don't care this 
        		condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 17 }
        	
        aclL3RuleTcpPshBit	 OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP Psh bit to be checked against the packet. The default 
        		value is 'dont_care'(-1). which means the rule don't care this 
        		condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 18 }	
        
        aclL3RuleTcpSynBit	 OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP Syn bit to be checked against the packet. The default 
        		value is 'dont_care'(-1), which means the rule don't care this condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 19 }		
        
        aclL3RuleTcpFinBit	 OBJECT-TYPE
        	SYNTAX	INTEGER	{
        	                    dont_care(-1),	
        						establish(1),
        						notEstablish(2)
        					}
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The TCP Fin bit to be checked against the packet. The default 
        		value is 'dont_care'(-1), which means the rule don't care this 
        		condition."
        	DEFVAL	{ dont_care }
        	::= { aclL3RuleEntry 20 }		  
        
        aclL3RuleDscp		OBJECT-TYPE
        	SYNTAX		Integer32 (-1..63)
        	MAX-ACCESS	read-create
        	STATUS		current
        	DESCRIPTION
        		" The IP Dscp value to be checked against the packet. 
                A default value is '-1', which means the rule don't 
                care this condition."
        	DEFVAL	{ -1 }
        	::= { aclL3RuleEntry 21 }
        	
        aclL3RuleIgmpType	 OBJECT-TYPE
        	SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
             " The IGMP Type to be checked against the packet.A default value is '-1',
             which means the rule don't care this condition."
           DEFVAL  { -1 }
           ::= { aclL3RuleEntry 22 }
           
        aclL3RulePortList OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the complete set of ports over which if the packet arrives
              this filter rule will be applicable."
 
           ::= { aclL3RuleEntry 23 }
           
           
        aclL3RuleAction OBJECT-TYPE 
           SYNTAX      INTEGER {
                          allow (1)
                          ,drop  (2)
                          ,mirror (3)
                          ,rateLimit(4)
                          ,replaceDSCP(5)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the action to be taken on the packet if the filter
              rule matches."
           DEFVAL  { allow } 
           ::= { aclL3RuleEntry 24 }
        aclL3RuleRateLimit OBJECT-TYPE 
           SYNTAX      Unsigned32
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Rate limit for matched packet."
        
           ::= { aclL3RuleEntry 25 }
        aclL3RuleReplaceDSCP OBJECT-TYPE 
           SYNTAX      Integer32  (-1..63)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "ReplaceDSCP for matched packet."
        
           ::= { aclL3RuleEntry 26 }
        aclL3RuleStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
                "This object indicates the status of this entry. An entry is
                created in this table when this object is SET to 'createAndWait'.
                The entry in this table is used when the status of this object 
                is SET 'active'. The entry in this table is not used when this 
                object is SET 'notInService'. An entry created in this table is
                be deleted when this object is SET 'destroy'."
           ::= { aclL3RuleEntry 27 }

    -- ------------------------------------------------------------------ 
    -- companyCPUInterfaceFilterGroup
    -- ------------------------------------------------------------------

        -- CPU Interface Filter Profile Group --------------------------------------------------
        cpuFilterProfile       OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 1 }
        
        cpuFilterProfileTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF CpuFilterProfileEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " A table to CPUInterfaceFilter profile .
               "
           ::= { cpuFilterProfile 1 }
        
        cpuFilterProfileEntry OBJECT-TYPE 
           SYNTAX      CpuFilterProfileEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " Each entry in this table is a CPUInterfaceFilter profile.
                 Index to the table is CPUInterfaceFilter profile ID. "
           INDEX { cpuFilterProfileNo}
           ::= { cpuFilterProfileTable 1 }
           
        CpuFilterProfileEntry ::= 
           SEQUENCE { 
              cpuFilterProfileNo 
                 Integer32, 
              cpuFilterProfileType 
                 INTEGER, 
              cpuFilterProfileRuleCount 
                 Integer32,  
              cpuFilterProfileMask 
                 OCTET STRING,
              cpuFilterProfileDstMacAddrMask 
                 MacAddress,          
              cpuFilterProfileSrcMacAddrMask 
                 MacAddress,         
              cpuFilterProfileIPProtocol  
                 INTEGER, 
              cpuFilterProfileIPProtocolMask  
                 OCTET STRING,  
              cpuFilterProfileDstIpAddrMask 
                 IpAddress, 
              cpuFilterProfileSrcIpAddrMask 
                 IpAddress,
              cpuFilterProfileDstPortMask
                 OCTET STRING,         
              cpuFilterProfileSrcPortMask
                 OCTET STRING,       
              cpuFilterProfileStatus
                 RowStatus
          }
        
        cpuFilterProfileNo OBJECT-TYPE 
           SYNTAX      Integer32 (1..3)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter,
               and the ID more than 50 is reserved for system-defined CPUInterfaceFilter.
               The user only allow to create user-defined CPUInterfaceFilter ID.
               And system-defined CPUInterfaceFilter is read only."
           ::= { cpuFilterProfileEntry 1 }
        
        cpuFilterProfileType OBJECT-TYPE 
           SYNTAX   INTEGER  {
                          l2 (1),
                          l3 (2)
                       }
           MAX-ACCESS   read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile type, possible value are
              l2 (1) - for MAC-based rule, 
              l3 (2) - for IPv4-based rule,
              "
           ::= { cpuFilterProfileEntry 2 }
        
        cpuFilterProfileRuleCount  OBJECT-TYPE 
           SYNTAX   Integer32 (0..65535)
           MAX-ACCESS   read-only 
           STATUS      current 
           DESCRIPTION 
              "The number of rules in this profile."
           ::= { cpuFilterProfileEntry 3 }
              
              
        cpuFilterProfileMask OBJECT-TYPE 
           SYNTAX   OCTET STRING
           MAX-ACCESS   read-write  
           STATUS      current 
           DESCRIPTION 
              "Indicate which field want to care in the packet.
               Turn on the following bits to select the following items
               Type        Item                   BIT         
               ------------------------------------------
               L2          DST_MAC                0 (LSB)        
               L2          SRC_MAC                1         
               L2          VID                    2         
               L2          8021P_PRIORITY         3         
               L2          ETHER_TYPE             4         
               L3          DSCP                   5         
               L3          ICMP_TYPE              6         
               L3          ICMP_CODE              7         
               L3          IGMP_TYPE              8         
               L3          DST_IP                 9         
               L3          SRC_IP                 10        
               L3          DST_PORT               11        
               L3          SRC_PORT               12        
               L3          TCPFLAG                13 (MSB)
               -------------------------------------------
               
               The value is in Hex format.
              "
           ::= { cpuFilterProfileEntry 4 }
       

        cpuFilterProfileDstMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile destination MAC address mask.
               If DST_MAC is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL2RuleDstMacAddr, 
               to caculate a range of MAC address which is really care.
              "
           ::= { cpuFilterProfileEntry 5 }
        
        
        cpuFilterProfileSrcMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile source MAC address mask.
               If SRC_MAC is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL2RuleSrcMacAddr, 
               to caculate a range of MAC address which is really care.
              "
           ::= { cpuFilterProfileEntry 6 }
        
        
        cpuFilterProfileIPProtocol OBJECT-TYPE 
           SYNTAX   INTEGER  {  
                         none(0),   
                                         icmp(1),
                                         igmp(2),
                                         tcp(6),
                                         udp(17)
                         ,ipMask(255)
                        }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Indicate which IP Protocol will be care in this profile.
               Only profile type is l3 can set the IP protocol.
               For others, this field will be none.
              "
           ::= { cpuFilterProfileEntry 7 } 
        cpuFilterProfileIPProtocolMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile IP protocol mask.
               If cpuFilterProfileIPProtocol set to ipMask, this field will be refered.
               It will work with its member rule field,cpuFilterL3RuleProtocol, 
               to caculate a range of IP protocol which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FF'h }   
           ::= { cpuFilterProfileEntry 8 }
        cpuFilterProfileDstIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile destination IP address mask.
               If DST_IP is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL3RuleDstIpAddr, 
               to caculate a range of IP address which is really care.
               The value is in HEX format, for example:
               '255.255.255.0' is presented to 'FFFFFF00'
              "
           DEFVAL  { 'FFFFFFFF'h }
           ::= { cpuFilterProfileEntry 9 }
        
        
        cpuFilterProfileSrcIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile source IP address mask.
               If SRC_IP is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL3RuleSrcIpAddr, 
               to caculate a range of IP address which is really care.
               The value is in HEX format, for example:
               '255.255.255.0' is presented to 'FFFFFF00'
              "
           DEFVAL  { 'FFFFFFFF'h }
           ::= { cpuFilterProfileEntry 10 }
        
        cpuFilterProfileDstPortMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile UDP/TCP destination port mask.
               If DST_PORT is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort, 
               to caculate a range of destination port which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFF'h }   
           ::= { cpuFilterProfileEntry 11 }
           
        
        cpuFilterProfileSrcPortMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The CPUInterfaceFilter Profile UDP/TCP source port mask.
               If SRC_PORT is turn on in cpuFilterProfileMask, 
               it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort, 
               to caculate a range of source port which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FFFF'h }     
           ::= { cpuFilterProfileEntry 12 }   

        cpuFilterProfileStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
               " This object indicates the status of this entry, can only be set to
                 'createAndWait','active' and 'destroy'. 
                 When the value of the entry status is 'createAndWait', it could be 
                 set to 'active' only if the three values of cpuFilterProfileType,
                 cpuFilterProfileMask and ProtocolType are not conflicted.
               "
        
           ::= { cpuFilterProfileEntry 15 }



        -- ------------------------------------------------------------------ 
        -- L2 Filter Group --------------------------------------------------
        cpuFilterL2Rule       OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 2 }

        cpuFilterL2RuleTable OBJECT-TYPE 
        
           SYNTAX      SEQUENCE OF CpuFilterL2RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               "A table to configure L2 filter rules in the system."
           ::= { cpuFilterL2Rule 1 }
        
        cpuFilterL2RuleEntry OBJECT-TYPE 
           SYNTAX      CpuFilterL2RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               "Each entry in this table is a L2 filter rule.
               Index to the table is the L2 filter number and Profile ID."
           INDEX { cpuFilterL2ProfileID, cpuFilterL2AccessID}
           ::= { cpuFilterL2RuleTable 1 }
           
        CpuFilterL2RuleEntry ::= 
           SEQUENCE { 
              cpuFilterL2ProfileID 
                 Integer32,        
              cpuFilterL2AccessID 
                 Integer32, 
              cpuFilterL2RuleEtherType 
                 Integer32, 
              cpuFilterL2RuleDstMacAddr 
                 MacAddress, 
              cpuFilterL2RuleSrcMacAddr 
                 MacAddress, 
              cpuFilterL2RuleVlanId 
                 Integer32,
              cpuFilterL2Rule1pPriority
                 Integer32,
              cpuFilterL2RuleDstMacAddrMask 
                 MacAddress, 
              cpuFilterL2RuleSrcMacAddrMask 
                 MacAddress,   
              cpuFilterL2RuleInPortList 
                 PortList,
              cpuFilterL2RuleAction 
                 INTEGER, 
              cpuFilterL2RuleStatus
                 RowStatus      
          }
        
        cpuFilterL2ProfileID OBJECT-TYPE 
           SYNTAX      Integer32 (1..3)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "L2 Filter rule ID."
           ::= { cpuFilterL2RuleEntry 1 }
            
        cpuFilterL2AccessID OBJECT-TYPE 
           SYNTAX      Integer32 (1..5)
           MAX-ACCESS  read-only  
           STATUS      current 
           DESCRIPTION 
              "CPUInterfaceFilter Profile ID which this rule join."
           DEFVAL  { 1 }
           ::= { cpuFilterL2RuleEntry 2 }
           
        cpuFilterL2RuleEtherType OBJECT-TYPE 
           SYNTAX      Integer32  (-1 | 1501..65535)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "The value in the Type/Len field of a frame that will
              be matched to trigger this filter. The default value of
              this object is '-1', which means the rule don't care this 
              condition."
           DEFVAL  { -1 }
           ::= { cpuFilterL2RuleEntry 3 }
                      
        cpuFilterL2RuleDstMacAddr OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Destination MAC address to be matched with the packet. By Default, the
               Destination Mac Address will be zero,which means the rule don't care this 
               condition." 
           ::= { cpuFilterL2RuleEntry 4 }
        
        cpuFilterL2RuleSrcMacAddr OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Source MAC address to be matched with the packet. By Default, the Source 
               Mac Address will be zero, which means the rule don't care this condition..
               address"
           ::= { cpuFilterL2RuleEntry 5 }
                
        cpuFilterL2RuleVlanId OBJECT-TYPE 
           SYNTAX      Integer32 (-1..4094)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
              be treated as customer Vlan Id. By Default, the value will be '-1', 
              which means the rule don't care this condition."
           DEFVAL  { -1 }
           ::= { cpuFilterL2RuleEntry 6 }        
         
         cpuFilterL2Rule1pPriority OBJECT-TYPE 
           SYNTAX      Integer32  (-1..7)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "802.1p priority to be matched with the packet. By Default, the value
              will be '-1', which means the rule don't care this condition."
          DEFVAL  { -1 }
           ::= { cpuFilterL2RuleEntry 7 }   
        
        cpuFilterL2RuleDstMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The MAC address Mask work for Destination MAC address.
              This field is read-only and copy from it's Profile setting."
              
           ::= { cpuFilterL2RuleEntry 8 }

        cpuFilterL2RuleSrcMacAddrMask OBJECT-TYPE 
           SYNTAX      MacAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The MAC address Mask work for Source MAC address.
              This field is read-only and copy from it's Profile setting."

           ::= { cpuFilterL2RuleEntry 9 } 

        cpuFilterL2RuleInPortList OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the complete set of ports over which this filter is applied
               for packets ingress at ports in this list." 
           ::= { cpuFilterL2RuleEntry 10 }
        
        cpuFilterL2RuleAction OBJECT-TYPE 
           SYNTAX      INTEGER {
                          allow (1)
                          ,drop  (2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the action to be taken on the packet if the filter
              rule matches.
              If the action is 'allow', the packet will be forwarded according
              to the forwarding rules.
              If the action is 'drop', the packet will be discarded."
           DEFVAL  { allow } 
           ::= { cpuFilterL2RuleEntry 11 }

         cpuFilterL2RuleStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
                "This object indicates the status of this entry. An entry is
                created in this table when this object is SET to 'createAndWait'.
                The entry in this table is used when the status of this object 
                is SET 'active'. The entry in this table is not used when this 
                object is SET 'notInService'. An entry created in this table is
                be deleted when this object is SET 'destroy'."
           ::= { cpuFilterL2RuleEntry 14 }    

        -- ------------------------------------------------------------------ 
        -- L3 Filter Group --------------------------------------------------
        cpuFilterL3Rule       OBJECT IDENTIFIER ::= { companyCPUInterfaceFilterGroup 3 }
         
        cpuFilterL3RuleTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF CpuFilterL3RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " A table to configure L3 filter rules in the system.
               "
           ::= { cpuFilterL3Rule 1 }

        cpuFilterL3RuleEntry OBJECT-TYPE 
           SYNTAX      CpuFilterL3RuleEntry
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               " Each entry in this table is a L3 filter rule.
                 Index to the table is L3 filter number and Profile ID."
           INDEX { cpuFilterL3RuleProfileNo, cpuFilterL3RuleAccessID}
           ::= { cpuFilterL3RuleTable 1 }

        CpuFilterL3RuleEntry ::= 
           SEQUENCE { 
              cpuFilterL3RuleProfileNo 
                 Integer32, 
              cpuFilterL3RuleAccessID 
                 Integer32,
              cpuFilterL3RuleProtocol  
                 INTEGER, 
              cpuFilterL3RuleProtocolMask  
                 OCTET STRING, 
              cpuFilterL3RuleICMPMessageType 
                 Integer32, 
              cpuFilterL3RuleICMPMessageCode 
                 Integer32, 
              cpuFilterL3RuleDstIpAddr 
                 IpAddress, 
              cpuFilterL3RuleSrcIpAddr 
                 IpAddress, 
              cpuFilterL3RuleDstIpAddrMask 
                 IpAddress, 
              cpuFilterL3RuleSrcIpAddrMask 
                 IpAddress,
              cpuFilterL3RuleTcpUdpDstPort
                 Integer32, 
              cpuFilterL3RuleTcpUdpSrcPort
                 Integer32, 
              cpuFilterL3RuleTcpUdpDstPortMask
                OCTET STRING,         
              cpuFilterL3RuleTcpUdpSrcPortMask
                OCTET STRING,         
              cpuFilterL3RuleTcpAckBit
                 INTEGER,
              cpuFilterL3RuleTcpRstBit
                 INTEGER,
              cpuFilterL3RuleTcpUrgBit
                 INTEGER,
              cpuFilterL3RuleTcpPshBit
                 INTEGER,
              cpuFilterL3RuleTcpSynBit
                 INTEGER,
              cpuFilterL3RuleTcpFinBit
                 INTEGER,
              cpuFilterL3RuleDscp
                 Integer32,
              cpuFilterL3RuleIgmpType
                 Integer32,
              cpuFilterL3RulePortList 
                 PortList,
              cpuFilterL3RuleAction 
                 INTEGER, 
              cpuFilterL3RuleStatus
                 RowStatus
          }
        
        cpuFilterL3RuleProfileNo OBJECT-TYPE 
           SYNTAX      Integer32 (1..5)
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "L3 Filter rule ID."
           ::= { cpuFilterL3RuleEntry 1 }
            
        cpuFilterL3RuleAccessID OBJECT-TYPE 
           SYNTAX      Integer32 (1..3)
           MAX-ACCESS  read-only  
           STATUS      current 
           DESCRIPTION 
              "The Profile ID which this rule join."
           ::= { cpuFilterL3RuleEntry 2 }
              
        cpuFilterL3RuleProtocol OBJECT-TYPE 
           SYNTAX      INTEGER  {     
                                         icmp(1),
                                         igmp(2),
                                         tcp(6),
                                         udp(17)
                        } 
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              " The type of protocol to be checked against the packet."
           ::= { cpuFilterL3RuleEntry 3 }
           
        cpuFilterL3RuleProtocolMask OBJECT-TYPE 
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP protocol mask.
               This field is read-only and copy from it's Profile setting.
               It will work with the other field,cpuFilterL3RuleProtocol, 
               to caculate a range of IP protocol which is really care.
               The value is in HEX format.
              "
           DEFVAL  { 'FF'h }   
           ::= { cpuFilterL3RuleEntry 4 }

        cpuFilterL3RuleICMPMessageType OBJECT-TYPE 
           SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
             " The message type to be checked against the packet. If the
              message type matches with the packet, then the packet will be
              dropped / allowed based on the action set in cpuFilterL3RuleAction.
              The default value is '-1',which means the rule don't care this 
              condition.
              Some ICMP message types are: 
                   echoReply(0),
                   destinationUnreachable(3),
                   sourceQuench(4),
                   redirect(5),
                   echoRequest(8),
                   timeExceeded(11),
                   parameterProblem(12),
                   timestampRequest(13),
                   timestampReply(14),
                   informationRequest(15),
                   informationReply(16),
                   addressMaskRequest(17),
                   addressMaskReply (18),
              "
           DEFVAL  { -1 }
           ::= { cpuFilterL3RuleEntry 5 }
        
        cpuFilterL3RuleICMPMessageCode OBJECT-TYPE 
           SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              " The message code to be checked against the packet. If the
              packet matches with the message code, then the packet will
              be dropped / allowed based on the action set in cpuFilterL3RuleAction.
              The default value is '-1', which means the rule don't care this 
              condition.
              Some ICMP message codes are :
                   networkUnreachable(0),
                   hostUnreachable(1),
                   protocolUnreachable(2),
                   portUnreachable(3),
                   fragmentNeed(4),
                   sourceRouteFail(5),
                   destNetworkUnknown(6),
                   destHostUnknown(7),
                   srcHostIsolated(8),
                   destNetworkAdminProhibited(9),
                   destHostAdminProhibited(10),
                   networkUnreachableTOS(11),
                   hostUnreachableTOS(12),
              "
           DEFVAL   { -1 }
           ::= { cpuFilterL3RuleEntry 6 }

        cpuFilterL3RuleDstIpAddr OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Destination IP address to be matched with the packet.
               The default value will be zero, which means the rule 
               don't care this condition."
           DEFVAL  { '00000000'h }
           ::= { cpuFilterL3RuleEntry 7 }
        
        cpuFilterL3RuleSrcIpAddr OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Source IP address to be matched with the packet.
              The default value will be zero, which means the 
              rule don't care this condition."

           DEFVAL  { '00000000'h }
           ::= { cpuFilterL3RuleEntry 8 }
        
        cpuFilterL3RuleDstIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP subnet mask for Destination IP address.
               This field is read-only and copy from it's Profile setting.
              "

           DEFVAL  { 'FFFFFFFF'h }
           ::= { cpuFilterL3RuleEntry 9 }
        
        cpuFilterL3RuleSrcIpAddrMask OBJECT-TYPE 
           SYNTAX      IpAddress
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The IP subnet mask for Source IP address.
               This field is read-only and copy from it's Profile setting.
              "
           
           DEFVAL  { 'FFFFFFFF'h }
           ::= { cpuFilterL3RuleEntry 10 }

        cpuFilterL3RuleTcpUdpDstPort OBJECT-TYPE
           SYNTAX      Integer32 (-1..65535)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The TCP / UDP destination port. The default value is -1, 
              which means the rule don't care this condition."
           DEFVAL   { -1 }
           ::= { cpuFilterL3RuleEntry 11 }
        
        cpuFilterL3RuleTcpUdpSrcPort OBJECT-TYPE
           SYNTAX      Integer32 (-1..65535)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "The TCP / UDP source port. The default value is -1, 
              which means the rule don't care this condition."
           DEFVAL   { -1 }
           ::= { cpuFilterL3RuleEntry 12 }
           
        cpuFilterL3RuleTcpUdpDstPortMask OBJECT-TYPE
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The TCP / UDP Destination port Mask.
               This field is read-only and copy from it's Profile setting.
              "
           ::= { cpuFilterL3RuleEntry 13 }

        cpuFilterL3RuleTcpUdpSrcPortMask OBJECT-TYPE
           SYNTAX      OCTET STRING
           MAX-ACCESS  read-only
           STATUS      current
           DESCRIPTION
              "The TCP / UDP Source port Mask.
               This field is read-only and copy from it's Profile setting.
              "
           ::= { cpuFilterL3RuleEntry 14 } 
           
        cpuFilterL3RuleTcpAckBit                OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP ACK bit to be checked against the packet. The default 
                        value is 'dontcare'(-1), which means the rule don't care this 
                        condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 15 }
        
        cpuFilterL3RuleTcpRstBit         OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP RST bit to be checked against the packet. The default 
                        value is 'dontcare'(-1), which means the rule don't care this 
                        condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 16 }
        
        cpuFilterL3RuleTcpUrgBit         OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP Urg bit to be checked against the packet. The default 
                        value is 'dontcare'(-1), which means the rule don't care this 
                        condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 17 }
                
        cpuFilterL3RuleTcpPshBit         OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP Psh bit to be checked against the packet. The default 
                        value is 'dontcare'(-1). which means the rule don't care this 
                        condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 18 } 
        
        cpuFilterL3RuleTcpSynBit         OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP Syn bit to be checked against the packet. The default 
                        value is 'dontcare'(-1), which means the rule don't care this condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 19 }

        cpuFilterL3RuleTcpFinBit         OBJECT-TYPE
                SYNTAX  INTEGER {
                                    dontcare(-1),
                                                        establish(1),
                                                        notEstablish(2)
                                                }
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The TCP Fin bit to be checked against the packet. The default 
                        value is 'dontcare'(-1), which means the rule don't care this 
                        condition."
                DEFVAL  { dontcare }
                ::= { cpuFilterL3RuleEntry 20 }
        
        cpuFilterL3RuleDscp             OBJECT-TYPE
                SYNTAX          Integer32 (-1..63)
                MAX-ACCESS      read-create
                STATUS          current
                DESCRIPTION
                        " The IP Dscp value to be checked against the packet. 
                A default value is '-1', which means the rule don't 
                care this condition."
                DEFVAL  { -1 }
                ::= { cpuFilterL3RuleEntry 21 }
                
        cpuFilterL3RuleIgmpType  OBJECT-TYPE
                SYNTAX      Integer32 (-1..255)
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
             " The IGMP Type to be checked against the packet.A default value is '-1',
             which means the rule don't care this condition."
           DEFVAL  { -1 }
           ::= { cpuFilterL3RuleEntry 22 }
           
        cpuFilterL3RulePortList OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the complete set of ports over which if the packet arrives
              this filter rule will be applicable."

           ::= { cpuFilterL3RuleEntry 23 }

        cpuFilterL3RuleAction OBJECT-TYPE 
           SYNTAX      INTEGER {
                          allow (1)
                          ,drop  (2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
              "Specifies the action to be taken on the packet if the filter
              rule matches."
           DEFVAL  { allow } 
           ::= { cpuFilterL3RuleEntry 24 }

        cpuFilterL3RuleStatus OBJECT-TYPE 
           SYNTAX      RowStatus
           MAX-ACCESS  read-create 
           STATUS      current 
           DESCRIPTION 
                "This object indicates the status of this entry. An entry is
                created in this table when this object is SET to 'createAndWait'.
                The entry in this table is used when the status of this object 
                is SET 'active'. The entry in this table is not used when this 
                object is SET 'notInService'. An entry created in this table is
                be deleted when this object is SET 'destroy'."
           ::= { cpuFilterL3RuleEntry 27 }

      snmpGlobalState OBJECT-TYPE 
           SYNTAX      INTEGER {
                          enabled(1),
                          disabled(2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "This object is for enabling or disabling SNMP Community function."
        
           ::= { companySNMPV3 1 }
      
      snmpV3User                    OBJECT IDENTIFIER ::= { companySNMPV3 2 }
      snmpV3Group                   OBJECT IDENTIFIER ::= { companySNMPV3 3 }
      snmpV3ViewTree                OBJECT IDENTIFIER ::= { companySNMPV3 4 }
      snmpV3Community               OBJECT IDENTIFIER ::= { companySNMPV3 5 }
      snmpV3Host                    OBJECT IDENTIFIER ::= { companySNMPV3 6 }
      
      snmpV3EngineID OBJECT-TYPE
              SYNTAX  SnmpEngineID 
              MAX-ACCESS read-write
              STATUS current
		      DESCRIPTION 
		         "An SNMP engine's administratively-unique identifier.

                 In a simple agent, this value is always that agent's
                 own snmpEngineID value.

                 The value can also take the value of the snmpEngineID
                 of a remote SNMP engine with which this user can
                 communicate."

         ::=  { companySNMPV3  7 }
      
      snmpV3Trap                    OBJECT IDENTIFIER ::= { companySNMPV3 8 } 
      
      -- ----------------------------------------------------------------
      -- The snmpV3User group
      -- ----------------------------------------------------------------

      snmpV3UserTable OBJECT-TYPE
           SYNTAX SEQUENCE OF SnmpV3UserEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              ""
           ::= { snmpV3User 1 }
        
      snmpV3UserEntry OBJECT-TYPE
           SYNTAX      SnmpV3UserEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              ""
           INDEX { snmpV3UserName , snmpV3UserVersion}
           ::= { snmpV3UserTable 1 }
      
      SnmpV3UserEntry ::= SEQUENCE {
                snmpV3UserName                      SnmpAdminString,
                snmpV3UserVersion                   INTEGER,
                snmpV3UserGroupName                 SnmpAdminString,
                snmpV3UserAuthProtocol              INTEGER,
                snmpV3UserAuthProtocolPassword      SnmpAdminString,
                snmpV3UserPrivProtocol              INTEGER, 
                snmpV3UserPrivProtocolPassword      SnmpAdminString,             
                snmpV3UserStatus                    RowStatus
            }

      snmpV3UserName       OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "A human readable string representing the name of
                         the user.
        
                         This is the (User-based Security) Model dependent
                         security ID.
                        "
      ::= { snmpV3UserEntry 1 }
    
        snmpV3UserVersion  OBJECT-TYPE
            SYNTAX    INTEGER {
                      v1            (1),
                      v2c	        (2),
                      v3            (3)
                   }
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "A human readable string representing the name of
                         the user.
        
                         This is the (User-based Security) Model dependent
                         security ID.
                        "
            ::= { snmpV3UserEntry 2 }           

                  
        snmpV3UserGroupName      OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The name of the group to which this entry (e.g., the
                         combination of securityModel and securityName)
                         belongs.
        
                         This groupName is used as index into the
                         vacmAccessTable to select an access control policy.
                         However, a value in this table does not imply that an
                         instance with the value exists in table vacmAccesTable.
                        "
            ::= { snmpV3UserEntry 3 }                             

        snmpV3UserAuthProtocol OBJECT-TYPE
            SYNTAX    INTEGER {
                      none          (1),
                      md5	        (2),
                      sha           (3)
                   }
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "An indication of whether messages sent on behalf of
                 this user to/from the SNMP engine identified by
                 usmUserEngineID, can be authenticated, and if so,
                 the type of authentication protocol which is used.

                 An instance of this object is created concurrently
                 with the creation of any other object instance for
                 the same user (i.e., as part of the processing of
                 the set operation which creates the first object
                 instance in the same conceptual row).

                 If an initial set operation (i.e. at row creation time)
                 tries to set a value for an unknown or unsupported
                 protocol, then a 'wrongValue' error must be returned.

                 The value will be overwritten/set when a set operation
                 is performed on the corresponding instance of
                 UserCloneFrom.

                 Once instantiated, the value of such an instance of
                 this object can only be changed via a set operation to
                 the value of the NoAuthProtocol.

                 If a set operation tries to change the value of an


                 existing instance of this object to any value other
                 than NoAuthProtocol, then an 'inconsistentValue'
                 error must be returned.

                 If a set operation tries to set the value to the
                 NoAuthProtocol while the UserPrivProtocol value
                 in the same row is not equal to NoPrivProtocol,
                 then an 'inconsistentValue' error must be returned.
                 That means that an SNMP command generator application
                 must first ensure that the UserPrivProtocol is set
                 to the NoPrivProtocol value before it can set
                 the UserAuthProtocol value to NoAuthProtocol.
                "
            ::= { snmpV3UserEntry 4 }
       
        snmpV3UserAuthProtocolPassword OBJECT-TYPE
        SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION  ""
            ::= { snmpV3UserEntry 5 }    
            
        
        snmpV3UserPrivProtocol OBJECT-TYPE
            SYNTAX    INTEGER {
                      none          (1),
                      des	        (2)
                   }
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "An indication of whether messages sent on behalf of
                 this user to/from the SNMP engine identified by
                 usmUserEngineID, can be protected from disclosure,
                 and if so, the type of privacy protocol which is used.

                 An instance of this object is created concurrently
                 with the creation of any other object instance for
                 the same user (i.e., as part of the processing of
                 the set operation which creates the first object
                 instance in the same conceptual row).

                 If an initial set operation (i.e. at row creation time)
                 tries to set a value for an unknown or unsupported
                 protocol, then a 'wrongValue' error must be returned.

                 The value will be overwritten/set when a set operation
                 is performed on the corresponding instance of
                 usmUserCloneFrom.

                 Once instantiated, the value of such an instance of
                 this object can only be changed via a set operation to
                 the value of the NoPrivProtocol.

                 If a set operation tries to change the value of an
                 existing instance of this object to any value other
                 than NoPrivProtocol, then an 'inconsistentValue'
                 error must be returned.

                 Note that if any privacy protocol is used, then you
                 must also use an authentication protocol. In other
                 words, if usmUserPrivProtocol is set to anything else
                 than NoPrivProtocol, then the corresponding instance
                 of usmUserAuthProtocol cannot have a value of

                 usmNoAuthProtocol. If it does, then an
                 'inconsistentValue' error must be returned.
                "
            ::= { snmpV3UserEntry 6 }

        snmpV3UserPrivProtocolPassword OBJECT-TYPE
        SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION  ""
            ::= { snmpV3UserEntry 7 }   


        snmpV3UserStatus  OBJECT-TYPE
            SYNTAX       RowStatus
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The status of this conceptual row.

                 Until instances of all corresponding columns are
                 appropriately configured, the value of the
                 corresponding instance of the usmUserStatus column
                 is 'notReady'.

                 In particular, a newly created row for a user who
                 employs authentication, cannot be made active until the
                 corresponding usmUserCloneFrom and usmUserAuthKeyChange
                 have been set.

                 Further, a newly created row for a user who also
                 employs privacy, cannot be made active until the
                 usmUserPrivKeyChange has been set.

                 The RowStatus TC [RFC2579] requires that this
                 DESCRIPTION clause states under which circumstances
                 other objects in this row can be modified:

                 The value of this object has no effect on whether
                 other objects in this conceptual row can be modified,
                 except for usmUserOwnAuthKeyChange and
                 usmUserOwnPrivKeyChange. For these 2 objects, the
                 value of usmUserStatus MUST be active.
                "
    ::= { snmpV3UserEntry 8 }


      -- ----------------------------------------------------------------
      -- The snmpV3Group group
      -- ----------------------------------------------------------------
        snmpV3GroupTable OBJECT-TYPE
           SYNTAX SEQUENCE OF SnmpV3GroupEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              ""
           ::= { snmpV3Group 1 }
        
        snmpV3GroupEntry OBJECT-TYPE
           SYNTAX      SnmpV3GroupEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              ""
           INDEX { snmpV3GroupName ,snmpV3GroupSecurityModel ,snmpV3GroupSecurityLevel}      
           ::= { snmpV3GroupTable 1 }
              
        SnmpV3GroupEntry ::= SEQUENCE {
                snmpV3GroupName              SnmpAdminString,
                snmpV3GroupSecurityModel     INTEGER,
                snmpV3GroupSecurityLevel     SnmpSecurityLevel,
                snmpV3GroupReadViewName      SnmpAdminString,
                snmpV3GroupWriteViewName     SnmpAdminString,
                snmpV3GroupNotifyViewName    SnmpAdminString,
                snmpV3GroupStatus            RowStatus
            }
        
        snmpV3GroupName  OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "The name of the group to which this entry (e.g., the
                         combination of securityModel and securityName)
                         belongs.
        
                         This groupName is used as index into the
                         vacmAccessTable to select an access control policy.
                         However, a value in this table does not imply that an
                         instance with the value exists in table vacmAccesTable.
                        "
            ::= { snmpV3GroupEntry 1 }    
        
        snmpV3GroupSecurityModel OBJECT-TYPE
            SYNTAX    INTEGER {
                      v1            (1),
                      v2c	        (2),
                      v3            (3)
                   }
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "In order to gain the access rights allowed by this
                         conceptual row, this securityModel must be in use.
                        "
            ::= { snmpV3GroupEntry 2 }
        
        snmpV3GroupSecurityLevel OBJECT-TYPE
            SYNTAX       SnmpSecurityLevel
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "The minimum level of security required in order to
                         gain the access rights allowed by this conceptual
                         row.  A securityLevel of noAuthNoPriv is less than
                         authNoPriv which in turn is less than authPriv.
        
                         If multiple entries are equally indexed except for
                         this vacmAccessSecurityLevel index, then the entry
                         which has the highest value for
                         vacmAccessSecurityLevel is selected.
                        "
            ::= { snmpV3GroupEntry 3 }
        
        snmpV3GroupReadViewName OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(0..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The value of an instance of this object identifies
                         the MIB view of the SNMP context to which this
                         conceptual row authorizes read access.
        
                         The identified MIB view is that one for which the
                         vacmViewTreeFamilyViewName has the same value as the
                         instance of this object; if the value is the empty
                         string or if there is no active MIB view having this
                         value of vacmViewTreeFamilyViewName, then no access
                         is granted.
                        "
        --    DEFVAL      { ''H }   -- -- the empty string --
            ::= { snmpV3GroupEntry 4 }
        
        snmpV3GroupWriteViewName OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(0..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The value of an instance of this object identifies
                         the MIB view of the SNMP context to which this
                         conceptual row authorizes write access.
        
                         The identified MIB view is that one for which the
                         vacmViewTreeFamilyViewName has the same value as the
                         instance of this object; if the value is the empty
                         string or if there is no active MIB view having this
                         value of vacmViewTreeFamilyViewName, then no access
                         is granted.
                        "
        --    DEFVAL      { ''H }   -- -- the empty string --
        
            ::= { snmpV3GroupEntry 5 }
        
        snmpV3GroupNotifyViewName OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(0..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The value of an instance of this object identifies
                         the MIB view of the SNMP context to which this
                         conceptual row authorizes access for notifications.
        
                         The identified MIB view is that one for which the
                         vacmViewTreeFamilyViewName has the same value as the
                         instance of this object; if the value is the empty
                         string or if there is no active MIB view having this
                         value of vacmViewTreeFamilyViewName, then no access
                         is granted.
                        "
        --    DEFVAL      { ''H }   -- -- the empty string --
            ::= { snmpV3GroupEntry 6 }
        
        snmpV3GroupStatus     OBJECT-TYPE
            SYNTAX       RowStatus
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The status of this conceptual row.
        
                         The  RowStatus TC [RFC2579] requires that this
                         DESCRIPTION clause states under which circumstances
                         other objects in this row can be modified:
        
                         The value of this object has no effect on whether
                         other objects in this conceptual row can be modified.
                        "
            ::= { snmpV3GroupEntry 7 }


      -- ----------------------------------------------------------------
      -- The snmpV3ViewTree group
      -- ----------------------------------------------------------------
        snmpV3ViewTreeTable OBJECT-TYPE
           SYNTAX SEQUENCE OF SnmpV3ViewTreeEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              ""
           ::= { snmpV3ViewTree 1 }
        
        snmpV3ViewTreeEntry OBJECT-TYPE
           SYNTAX      SnmpV3ViewTreeEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              ""
           INDEX { snmpV3viewTreeName ,snmpV3viewTreeSubtree }      
           ::= { snmpV3ViewTreeTable 1 }
              
        SnmpV3ViewTreeEntry ::= SEQUENCE
            {
                snmpV3viewTreeName         SnmpAdminString,
                snmpV3viewTreeSubtree      OBJECT IDENTIFIER,
                snmpV3viewTreeMask         OCTET STRING,
                snmpV3viewTreeType         INTEGER,
                snmpV3viewTreeStatus       RowStatus
            }
        
        snmpV3viewTreeName OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "The human readable name for a family of view subtrees.
                        "
        
            ::= { snmpV3ViewTreeEntry 1 }
        
        snmpV3viewTreeSubtree OBJECT-TYPE
            SYNTAX       OBJECT IDENTIFIER
            MAX-ACCESS   read-only
            STATUS       current
            DESCRIPTION "The MIB subtree which when combined with the
                         corresponding instance of vacmViewTreeFamilyMask
                         defines a family of view subtrees.
                        "
            ::= { snmpV3ViewTreeEntry 2 }
        
        snmpV3viewTreeMask OBJECT-TYPE
            SYNTAX       OCTET STRING (SIZE (0..16))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The bit mask which, in combination with the
                         corresponding instance of vacmViewTreeFamilySubtree,
                         defines a family of view subtrees.
        
                         Each bit of this bit mask corresponds to a
                         sub-identifier of vacmViewTreeFamilySubtree, with the
                         most significant bit of the i-th octet of this octet
                         string value (extended if necessary, see below)
                         corresponding to the (8*i - 7)-th sub-identifier, and
                         the least significant bit of the i-th octet of this
                         octet string corresponding to the (8*i)-th
                         sub-identifier, where i is in the range 1 through 16.
        
                         Each bit of this bit mask specifies whether or not
                         the corresponding sub-identifiers must match when
                         determining if an OBJECT IDENTIFIER is in this
                         family of view subtrees; a '1' indicates that an
                         exact match must occur; a '0' indicates 'wild card',
                         i.e., any sub-identifier value matches.
        
                         Thus, the OBJECT IDENTIFIER X of an object instance
                         is contained in a family of view subtrees if, for
                         each sub-identifier of the value of
                         vacmViewTreeFamilySubtree, either:
        
                           the i-th bit of vacmViewTreeFamilyMask is 0, or
        
                           the i-th sub-identifier of X is equal to the i-th
                           sub-identifier of the value of
                           vacmViewTreeFamilySubtree.
        
                         If the value of this bit mask is M bits long and
        
                         there are more than M sub-identifiers in the
                         corresponding instance of vacmViewTreeFamilySubtree,
                         then the bit mask is extended with 1's to be the
                         required length.
        
                         Note that when the value of this object is the
                         zero-length string, this extension rule results in
                         a mask of all-1's being used (i.e., no 'wild card'),
                         and the family of view subtrees is the one view
                         subtree uniquely identified by the corresponding
                         instance of vacmViewTreeFamilySubtree.
        
                         Note that masks of length greater than zero length
                         do not need to be supported.  In this case this
                         object is made read-only.
                        "
        --    DEFVAL      { ''H }
            ::= { snmpV3ViewTreeEntry 3 }
        
        snmpV3viewTreeType OBJECT-TYPE
            SYNTAX       INTEGER  { included(1), excluded(2) }
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "Indicates whether the corresponding instances of
                         vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
                         define a family of view subtrees which is included in
                         or excluded from the MIB view.
                        "
        --    DEFVAL      { included }
            ::= { snmpV3ViewTreeEntry 4 }
        
        snmpV3viewTreeStatus OBJECT-TYPE
            SYNTAX       RowStatus
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION "The status of this conceptual row.
        
                         The  RowStatus TC [RFC2579] requires that this
                         DESCRIPTION clause states under which circumstances
                         other objects in this row can be modified:
        
                         The value of this object has no effect on whether
                         other objects in this conceptual row can be modified.
                        "
            ::= { snmpV3ViewTreeEntry 5 }
    

      -- ----------------------------------------------------------------
      -- The snmpV3Community group
      -- ----------------------------------------------------------------

        snmpV3CommunityTable OBJECT-TYPE
           SYNTAX SEQUENCE OF SnmpV3CommunityEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              ""
           ::= { snmpV3Community 1 }
        
        snmpV3CommunityEntry OBJECT-TYPE
           SYNTAX      SnmpV3CommunityEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              ""
           INDEX { snmpV3CommunityName }
           ::= { snmpV3CommunityTable 1 }
              
        SnmpV3CommunityEntry ::= SEQUENCE
            {
                snmpV3CommunityName                OCTET STRING,
                snmpV3CommunityPolicy              SnmpAdminString,
                snmpV3CommunityStatus              RowStatus
            }    
        
        snmpV3CommunityName OBJECT-TYPE
            SYNTAX      OCTET STRING
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The unique index value of a row in this table."
            ::= { snmpV3CommunityEntry 1 }
        
        snmpV3CommunityPolicy OBJECT-TYPE
            SYNTAX       SnmpAdminString (SIZE(1..32))
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION
                "A human readable string representing the corresponding
                 value of snmpCommunityName in a Security Model
                 independent format."
            ::= { snmpV3CommunityEntry 2 }
        
        snmpV3CommunityStatus OBJECT-TYPE
            SYNTAX       RowStatus
            MAX-ACCESS   read-create
            STATUS       current
            DESCRIPTION
                "The status of this conceptual row in the
                 snmpCommunityTable.
        
                 An entry in this table is not qualified for activation
                 until instances of all corresponding columns have been
                 initialized, either through default values, or through
                 Set operations.  The snmpCommunityName and
                 snmpCommunitySecurityName objects must be explicitly set.
        
                 There is no restriction on setting columns in this table
                 when the value of snmpCommunityStatus is active(1)."
            ::= { snmpV3CommunityEntry 3 }


      -- ----------------------------------------------------------------
      -- The snmpV3Host group
      -- ----------------------------------------------------------------

        snmpV3HostTable OBJECT-TYPE
           SYNTAX SEQUENCE OF SnmpV3HostEntry
           MAX-ACCESS not-accessible
           STATUS     current
           DESCRIPTION
              ""
           ::= { snmpV3Host 1 }

        snmpV3HostEntry OBJECT-TYPE
           SYNTAX      SnmpV3HostEntry
           MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
              ""
           INDEX { snmpV3HostAddress }
           ::= { snmpV3HostTable 1 }
              
        SnmpV3HostEntry ::= SEQUENCE
            {                
                snmpV3HostAddress           IpAddress,
                snmpV3HostCommunityName     SnmpAdminString,
                snmpV3HostVersion           INTEGER,
                snmpV3HostStatus            RowStatus       
            }    
        
        snmpV3HostAddress OBJECT-TYPE
               SYNTAX      IpAddress
               MAX-ACCESS  read-only
               STATUS      current
               DESCRIPTION
                   "This object contains a transport address.  The format of
                    this address depends on the value of the
                    snmpTargetAddrTDomain object. And this object is unique 
                    identifier associated with this snmpNotifyEntry."
               ::= { snmpV3HostEntry 1 }
               
        snmpV3HostCommunityName OBJECT-TYPE
               SYNTAX      SnmpAdminString (SIZE(1..32))
               MAX-ACCESS  read-create
               STATUS      current
               DESCRIPTION
                   "The locally arbitrary."
               ::= { snmpV3HostEntry 2 } 
               
        
        snmpV3HostVersion OBJECT-TYPE
               SYNTAX    INTEGER {
                      v1                (1),
                      v2c	            (2),
                      v3NoAuthNoPriv    (3),
                      v3AuthNoPriv      (4),
                      v3AuthPriv        (5)
                   }
               MAX-ACCESS  read-create
               STATUS      current
               DESCRIPTION
                   "The Level of Security to be used when generating
                    SNMP messages using this entry."
               ::= { snmpV3HostEntry 3 }
        
        snmpV3HostStatus OBJECT-TYPE
               SYNTAX       RowStatus
               MAX-ACCESS   read-create
               STATUS       current
               DESCRIPTION
                ""
               ::= { snmpV3HostEntry 4 }       
               
      -- ----------------------------------------------------------------
      -- The snmpV3Trap group
      -- ----------------------------------------------------------------

        snmpV3TrapSNMPAuthentication  OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION 
                "This object is for enabling or disabling SNMP login fail
                event trap in the system."
            ::= { snmpV3Trap 1 }
        
        snmpV3TrapBootup  OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION 
                "This object is for enabling or disabling devie Bootup event 
                trap in the system."
            ::= { snmpV3Trap 2 }
        
        snmpV3TrapFiberLinkUpDown  OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION 
                "This object is for enabling or disabling Fiber link up / link down
                event trap in the system."
            ::= { snmpV3Trap 3 }
        
        snmpV3TrapCopperLinkUpDown  OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "This object is for enabling or disabling Copper link up / link down
                event trap in the system." 
            ::= { snmpV3Trap 4 }
        
        snmpV3TrapRSTPStateChange  OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION 
                "This object is for enabling or disabling RSTP topology change
                event trap in the system."
            ::= { snmpV3Trap 5 }
                
        snmpV3TrapFirmUpgrade   OBJECT-TYPE
            SYNTAX INTEGER  {
        		 enabled(1),
        		 disabled(2)
            }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION 
                "This object is for enabling or disabling Firmware upgrade 
                suess or fail event trap in the system."
            ::= { snmpV3Trap 6 }
            

 
    -- ------------------------------------------------------------------ 
    -- companySyslog
    -- ------------------------------------------------------------------
        syslogSettingGroup          OBJECT IDENTIFIER ::= { companySyslog 1 }

syslogEnable OBJECT-TYPE
   SYNTAX       INTEGER {
                disable(0),
                enable(1)
               }
   MAX-ACCESS  read-write 
   STATUS      current 
   DESCRIPTION 
      "This object is for enabling or disabling syslog alert features in
       the system and the syslog will save to flash or send to remote 
       syslog server.
       System Logs record and manage events, as well as report errors and 
       informational messages."

   DEFVAL  { disable } 
   ::= { syslogSettingGroup 1 }


syslogSaveMode OBJECT-TYPE
   SYNTAX       INTEGER {
                onDemand(0),
                timeInterval(1),
                logTrigger(2)
               }
   MAX-ACCESS  read-write 
   STATUS      current 
   DESCRIPTION 
      "This object is for choosing the method to save syslog into flash."

   DEFVAL  { logTrigger } 
   ::= { syslogSettingGroup 2 }

syslogSaveMinutes OBJECT-TYPE
   SYNTAX       INTEGER (1..65535)
   MAX-ACCESS  read-write 
   STATUS      current 
   DESCRIPTION 
      "When savemode is time interval, it's used to set the interval minutes of 
      system save syslog to flash."
   DEFVAL  { 30 } 
   ::= { syslogSettingGroup 3 }


    -- ------------------------------------------------------------------
    -- smtpRecvMailAddrTable
    -- ------------------------------------------------------------------
            syslogServerGroup          OBJECT IDENTIFIER ::= { companySyslog 2 }
            
    syslogServTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF SyslogServEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "The table of syslog remote server."
        ::= { syslogServerGroup 1 }

    syslogServEntry OBJECT-TYPE
        SYNTAX     SyslogServEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "The list of syslog remote server entry."

        INDEX { syslogServIndex }
        ::= { syslogServTable 1 }

    SyslogServEntry  ::= 
            SEQUENCE {
              syslogServIndex          INTEGER,
              syslogServAddr           IpAddress,
              syslogServSeverity       INTEGER,
              syslogServFacility       INTEGER,
              syslogServUDPport        INTEGER,
              syslogServSrvStatus      INTEGER,
              syslogServSrvRowStatus   RowStatus
              }

    syslogServIndex OBJECT-TYPE
       SYNTAX       INTEGER (1..4)
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "The index of syslog remote server." 
        ::= { syslogServEntry  1 }

    syslogServAddr  OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "The IP Address of syslog remote server."
        ::= { syslogServEntry  2 }

    syslogServSeverity OBJECT-TYPE 
        SYNTAX       INTEGER{
                      warning(4),   -- For logging warning messages.
                      information(6),      -- For logging informational messages.
                      all(7)      -- For logging debug messages.
                    }
        MAX-ACCESS  read-write 
        STATUS      current 
        DESCRIPTION 
           "Specifies the log level option to be set for a specific server."
 
        ::= { syslogServEntry 3 }



    syslogServFacility OBJECT-TYPE 
       SYNTAX         INTEGER {
                   local0(128),     -- Reserved local use
                   local1(136),     -- Reserved local use
                   local2(144),     -- Reserved local use
                   local3(152),     -- Reserved local use
                   local4(160),     -- Reserved local use
                   local5(168),     -- Reserved local use
                   local6(176),     -- Reserved local use
                   local7(184)      -- Reserved local use
                  }
       MAX-ACCESS  read-write 
       STATUS      current 
       DESCRIPTION 
         "The Syslog standard facilities.
          The facility to be used when sending Syslog messages to this server."

       DEFVAL  { local0 } 
       ::= { syslogServEntry 4 }

    syslogServUDPport OBJECT-TYPE
       SYNTAX  INTEGER (514 | 6000..65535)
       MAX-ACCESS  read-write
       STATUS  current
       DESCRIPTION
          "The value is for setting UDP Port."
       ::= { syslogServEntry 5 }

    syslogServSrvStatus OBJECT-TYPE 
        SYNTAX       INTEGER {
                disabled(0),
                enabled(1)
               }
        MAX-ACCESS  read-write 
        STATUS      current 
        DESCRIPTION 
           "The status for this server. If enable, system will send message to 
           this server."
 
        ::= { syslogServEntry 6 }


    syslogServSrvRowStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
         "Row status of this server entry."
       ::= { syslogServEntry 7 }    

  
-- LBD Group ------------------------------------------------------    
    sysLBDStateEnable OBJECT-TYPE 
           SYNTAX      INTEGER {
                          enabled(1),
                          disabled(2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Enable/Disable Loopback detection function.
                The Loopback Detection function is used to detect the loop created
                by a specific port while Spanning Tree Protocol (STP) is not 
                enabled in the network, especially when the down links are hubs 
                or unmanaged switchs.The Switch will automatically shutdown the 
                port and sends a log to the administrator."
        
           DEFVAL  { disabled }
           ::= { companyLBD 1 }
        
    sysLBDInterval  OBJECT-TYPE
           SYNTAX      Integer32 (1..32767)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
            "Set a Loop detection Interval between 1 and 32767 seconds.
             The default is 2 seconds.
             This time interval to be used at counting time seconds to
            resend the CTP packet automatically."  
           DEFVAL  { 2 }
           ::= { companyLBD 2 }
           
    sysLBDRecoverTime  OBJECT-TYPE
           SYNTAX      Integer32 (0 | 60..1000000)
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
            "This time interval to be used at counting time seconds to
            recover the disabled port automatically. 
            The Loop Detection Recover Time can be set at 0 seconds, 
            or 60 to 1000000 seconds.
            Entering 0 will disable the Loop Detection Recover Time.
            The default is 60 seconds."  
           DEFVAL  { 60 }
           ::= { companyLBD 3 }       
        
        -- LBD Port Control Table
        
        sysLBDCtrlTable OBJECT-TYPE 
           SYNTAX      SEQUENCE OF SysLBDCtrlEntry 
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
              "A table to control Loopback detection features either for 
              the entire switch or for each interface in the switch."
           ::= { companyLBD 4 }
        
        sysLBDCtrlEntry OBJECT-TYPE 
           SYNTAX      SysLBDCtrlEntry 
           MAX-ACCESS  not-accessible 
           STATUS      current 
           DESCRIPTION 
               "An entry appears in this table for each interface 
                in the system."
           INDEX { sysLBDCtrlIndex }
           ::= { sysLBDCtrlTable 1 }
           
        SysLBDCtrlEntry ::= 
           SEQUENCE { 
              sysLBDCtrlIndex
                 Integer32, 
              sysLBDPortStatus 
                 INTEGER, 
              sysLBDPortLoopStatus 
                 INTEGER 
          }
        
        sysLBDCtrlIndex OBJECT-TYPE 
           SYNTAX      Integer32 
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
              "The interface index of the port for which the configuration
              in this entry applies."
           ::= { sysLBDCtrlEntry 1 }
            
        sysLBDPortStatus OBJECT-TYPE 
           SYNTAX      INTEGER {
                       enabled(1),
                       disabled(2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Provides control to per port enable or disable the loopback detection 
                function. Default is disabled."
           DEFVAL  { disabled }
           ::= { sysLBDCtrlEntry 2 }
        
        sysLBDPortLoopStatus OBJECT-TYPE 
           SYNTAX      INTEGER {
                       normal(1),
                       disabled(2)
                      }
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
               "The loop status for this port."
           ::= { sysLBDCtrlEntry 3 }

    -- ------------------------------------------------------------------    
    -- Mirror Group 
    -- ------------------------------------------------------------------
    

	sysMirrorStatus OBJECT-TYPE 
           SYNTAX      INTEGER {
                          enabled 	     (1),
                          disabled       (2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Enable/Disable Port Mirroring function.
               Default is disabled.
               Port Mirroring is a method of monitoring network traffic that 
               forwards a copy of each incoming and/or outgoing packet from one 
               port of the Switch to another port where the packet can be studied."
         --    "Provides control over the mirroring feature in the switch." --
        
           DEFVAL  { disabled }
           ::= { companyMirror 1 }
        
        sysMirrorTargetPort OBJECT-TYPE 
           SYNTAX      Integer32
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Specifies the port to which the mirrored traffic in the system 
                is to be copied." 
           ::= { companyMirror 2 }
        
        sysMirrorCtrlIngressMirroring OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Provides control to enable or disable mirroring of ingress 
                traffic over this interface to the mirrored-to port."
           ::= { companyMirror 3 }
        
        sysMirrorCtrlEgressMirroring OBJECT-TYPE 
           SYNTAX      PortList
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Provides control to enable or disable mirroring of egress 
                traffic over this interface to the mirrored-to port."
           ::= { companyMirror 4 }

    -- ------------------------------------------------------------------     
    -- trap setting
    
    sysTrapIP  OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "The smart console utility's IP address is used to recive trap events."
       ::= { companyTrapSetting 1 }
       
    sysTrapSystemEvent OBJECT-TYPE
       SYNTAX       INTEGER {
       				none(0),
       				deviceBootUp(1),
                    illegalLogin(2),
                    both(3)
                    }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable system trap events in the switch system."
       DEFVAL  { none }
       ::= { companyTrapSetting 2 }
    
    sysTrapFiberPortEvent OBJECT-TYPE
       SYNTAX       INTEGER {
       				enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable fiber port trap event in the system."
       DEFVAL  { disable }
       ::= { companyTrapSetting 3 }
    
    sysTrapTwistedPortEvent OBJECT-TYPE
       SYNTAX       INTEGER {
       				enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable twisted port trap event in the system."
       DEFVAL  { disable }
       ::= { companyTrapSetting 4 }   
    
    sysTrapStateChangeEvent OBJECT-TYPE
       SYNTAX       INTEGER {
       				enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable RSTP state change trap event in the system."
       DEFVAL  { disable }
       ::= { companyTrapSetting 5 }
       
    sysTrapFirmUpgradeEvent OBJECT-TYPE
       SYNTAX       INTEGER {
       				enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable firmware upgrading trap event in the system."
       DEFVAL  { disable }
       ::= { companyTrapSetting 6 }
	     sysTrapStatus  OBJECT-TYPE
       SYNTAX       INTEGER {
                    enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
          "Enable/Disable trap event in the system."  
       DEFVAL  { disable }
       ::= { companyTrapSetting 10 }                                    
       
	 
-- ------------------------------------------------------------------     
-- SNTP Timesetting
      -- ------------------------------------------------------------------


sysSNTPTimeSeconds  OBJECT-TYPE
   SYNTAX      Integer32
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "This object is for setting the system time in seconds 
        from  Epoch (00:00:00 UTC, January 1, 2009). Notice : 
        input value must larger than 1230768000 (00:00:00 UTC, 
        January 1, 2009) and smaller than 2145916799 (23:59:59
        UTC, December 31, 2037)."
   ::= { companySNTPSetting 1 }
   
sysSNTPFirstServer  OBJECT-TYPE
   SYNTAX      IpAddress
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNTP First Server's IP Address"
   ::= { companySNTPSetting 2 }
   
sysSNTPSecondServer  OBJECT-TYPE
   SYNTAX      IpAddress
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNTP Second Server's IP Address"
   ::= { companySNTPSetting 3 }
   
sysSNTPPollInterval  OBJECT-TYPE
   SYNTAX      Integer32
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
       "SNTP Poll Interval In Seconds  (30-99999) "
   ::= { companySNTPSetting 4 }

sysSNTPState  OBJECT-TYPE
   SYNTAX       INTEGER {
                sntp(1),
                local(2)
               }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "Enable/Disable SNTP function in the system."
   ::= { companySNTPSetting 5 }

-- SNTP TimeZonesetting


sysSNTPDSTOffset  OBJECT-TYPE
   SYNTAX       INTEGER  {
                offset30min (30),
                offset60min (60),
                offset90min (90),
                offset120min (120)
                }
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes."

   ::= { companySNTPSetting 6 }

sysSNTPGMTMinutes  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)"

   ::= { companySNTPSetting 7 }

sysSNTPDSTStartMon  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The start month of Daylight Saving Time."

   ::= { companySNTPSetting 8 }

sysSNTPDSTStartDay  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The start day of Daylight Saving Time."

   ::= { companySNTPSetting 9 }

sysSNTPDSTStartHour  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The start hour of Daylight Saving Time."

   ::= { companySNTPSetting 10 }

sysSNTPDSTStartMin  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The start minute of Daylight Saving Time."

   ::= { companySNTPSetting 11 }

sysSNTPDSTEndMon  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The end month of Daylight Saving Time."

   ::= { companySNTPSetting 12 }

sysSNTPDSTEndDay  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The end day of Daylight Saving Time."

   ::= { companySNTPSetting 13 }

sysSNTPDSTEndHour  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The end hour of Daylight Saving Time."

   ::= { companySNTPSetting 14 }

sysSNTPDSTEndMin  OBJECT-TYPE
   SYNTAX       INTEGER  
   MAX-ACCESS   read-write
   STATUS       current
   DESCRIPTION
      "The end minute of Daylight Saving Time."

   ::= { companySNTPSetting 15 }
	 
sysSNTPDSTState  OBJECT-TYPE
   SYNTAX       INTEGER {
                annual(1),
                disabled(2)
               }
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION
      "This object is for Annual(1) or Disabled(2) DST state in the system."
   ::= { companySNTPSetting 16 }

    -- ---------------------------------------------------------------------
    -- voicevlan Function
    -- ---------------------------------------------------------------------
          
      voicevlanSystem          OBJECT IDENTIFIER ::= { companyVoiceVlan 1 }
      voicevlanOUI             OBJECT IDENTIFIER ::= { companyVoiceVlan 2 }
 
    -- ------------------------------------------------------------------
    -- The Voice Vlan Group
    -- ------------------------------------------------------------------

      voiceVlanMode OBJECT-TYPE
           SYNTAX      INTEGER { enabled(1), disabled(2) }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
               "Voice VLAN is a feature that allows you to automatically place 
               the voice traffic from IP phone to an assigned VLAN to enhance 
               the VoIP service. 
               This object is for enabling or disabling Voice Vlan function 
               in the system. 
               If the Vlan mode is in Asymmetric VLAN mode, Voice VLAN can not 
               be enabled."

           ::= { voicevlanSystem 2 }

      voiceVlanId OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The ID of VLAN that you want the voice traffic to be in. 
                It must be a exist vlan id."
            ::= { voicevlanSystem 3 }

      voiceVlanTimeout OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "A period of time in hour to remove a port from voice VLAN 
                if the port is an automatic VLAN member.
                The Timeout range is 1~120 hours.
                Default aging time is 1 hour."
            ::= { voicevlanSystem 4}

      voiceVlanPriority OBJECT-TYPE
            SYNTAX INTEGER { highest(0), high(1), medium(2), low(3) }
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "The 802.1p priority levels of the traffic in the Voice VLAN."
            ::= { voicevlanSystem 5}

        --
        -- Voice Vlan Port Control Table
        --          

        voicevlanPortControlTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF VoiceVlanPortControlEntry
          MAX-ACCESS  not-accessible
           STATUS      current
           DESCRIPTION
                      "A table that contains Voice Vlan Port Control
                       configuration information."
          ::= { voicevlanSystem 6 }


        voicevlanPortControlEntry OBJECT-TYPE
          SYNTAX      VoiceVlanPortControlEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION
                      "A list of Voice Vlan Control configuration
                       parameters for each Port on this device."
          INDEX      { voicevlanPortControlIndex }
          ::= { voicevlanPortControlTable 1 }  

        VoiceVlanPortControlEntry ::=
          SEQUENCE {
            voicevlanPortControlIndex
                InterfaceIndex,
            voicevlanPortAutoDetection
                INTEGER,    
            voicevlanPortState
                INTEGER        
        }
        
        voicevlanPortControlIndex OBJECT-TYPE
          SYNTAX       InterfaceIndex
          MAX-ACCESS   read-only
          STATUS       current
          DESCRIPTION
              "The voice vlan port index."
          ::= { voicevlanPortControlEntry 1 }            
          
        voicevlanPortAutoDetection  OBJECT-TYPE
          SYNTAX       INTEGER { enabled(1), disabled(2) }
          MAX-ACCESS   read-write
          STATUS       current
          DESCRIPTION
            "This object is for enabling or disabling Voice Vlan Auto 
             Detection in the port.
             If the auto detection is enable, switch will add this port 
             to the voice VLAN automatically if it detects the device OUI 
             matches the Telephony OUI.
             If the port is a static member of voice vlan or a LA member,
             it can not enable voice vlan auto detection."
          ::= { voicevlanPortControlEntry 2 }
                
        voicevlanPortState      OBJECT-TYPE 
            SYNTAX INTEGER  {
        		 manual(1),
        		 dynamic(2),
                 none(3)
            }
           MAX-ACCESS  read-only 
           STATUS      current 
           DESCRIPTION 
                "This object indicates Voice vlan state to this Port.
                manual - this port is a static member of voice vlan.
                dynamic - this port is a dynamic member of voice vlan.
                none - this port is not a member of voice vlan."
                 
           ::= { voicevlanPortControlEntry 3 }    

    -- ------------------------------------------------------------------
    -- The Voice Vlan OUI Group
    -- ------------------------------------------------------------------

    --
    -- Voice Vlan OUI Table
    --
    
    voicevlanOUITable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF VoicevlanOUIEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "A voice vlan OUI entry containing the description and mac."

        ::= { voicevlanOUI 1 }

    voicevlanOUIEntry OBJECT-TYPE
        SYNTAX     VoicevlanOUIEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "A voice vlan OUI entry containing the description and mac."

        INDEX { voicevlanOUITelephonyOUI }
        ::= { voicevlanOUITable 1 }

    VoicevlanOUIEntry  ::= 
            SEQUENCE {
              voicevlanOUITelephonyOUI          MacAddress,
              voicevlanOUIDescription           OCTET STRING,
              voicevlanOUIMask                  MacAddress,
              voicevlanOUIStatus                RowStatus
              }

    voicevlanOUITelephonyOUI OBJECT-TYPE
       SYNTAX       MacAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "An Organizationally Unique Identifier (OUI) is a 24-bit number 
         that is purchased from the IEEE Registration Authority. This identifier 
         uniquely identifies a vendor, manufacturer, or other organization.
         This object indicates the voice traffic's OUI that user created." 
        ::= { voicevlanOUIEntry  1 }

    voicevlanOUIDescription OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "The Description for the OUI."
        ::= { voicevlanOUIEntry  2 }
        
    voicevlanOUIMask OBJECT-TYPE
       SYNTAX       MacAddress
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "Voice vlan OUI Mask. Always be FF:FF:FF:00:00:00."
        ::= { voicevlanOUIEntry  3 }
        
    voicevlanOUIStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
         "This object indicates the status of this entry. 
         To create a new entry, you must set the voicevlanOUIStatus 
         to be CreateAndGo, then this entry will turn to be Active."
       ::= { voicevlanOUIEntry 4 }    
 
	-- -----------------------------------------------------------------------------
	-- The Guest Vlan Group
	-- -----------------------------------------------------------------------------
	guestVlanName OBJECT-TYPE
	    SYNTAX      DisplayString(SIZE(1..32))
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
		"The VLAN name of guest VLAN."
	    ::= { companyGuestVlan 1 }

	guestVlanPort OBJECT-TYPE
	    SYNTAX      PortList
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
		"This object indicates the guest VLAN port members of this device."
	     ::= { companyGuestVlan 2 }

	guestVlanDelState OBJECT-TYPE
	    SYNTAX      INTEGER{
			none(1),
			start(2)
			}
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
		"Used to delete the guest VLAN."
	    ::= { companyGuestVlan 3 }

    -- ---------------------------------------------------------------------
    -- MacNotify Function
    -- ---------------------------------------------------------------------

    macNotifyState OBJECT-TYPE
        SYNTAX  INTEGER {
               enabled(1),        
               disabled(2)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
           "This object can enabled or disabled MAC Notification."
        ::= { companyMacNotify 1 }        
             
    macNotifyInterval OBJECT-TYPE
	    SYNTAX  INTEGER (1..2147483647)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
	        "This object indicates the time interval in second for trigger the MAC notify message. "
        --DEFVAL     { 1 }
	    ::= { companyMacNotify 2 }    

    macNotifyHistorySize OBJECT-TYPE
	    SYNTAX  INTEGER (1..500)
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
            "This object indicates the history size of variation MAC in address table. The default value is 1 ."
        --DEFVAL     { 1 }
    ::= { companyMacNotify 3 } 
    
    -- Mac Notify Port Control Table    
    macNotifyCtrlTable OBJECT-TYPE 
       SYNTAX      SEQUENCE OF MacNotifyCtrlEntry 
       MAX-ACCESS  not-accessible 
       STATUS      current 
       DESCRIPTION 
          "A table to control Loopback detection features either for 
          the entire switch or for each interface in the switch."
       ::= { companyMacNotify 4 }
    
    macNotifyCtrlEntry OBJECT-TYPE 
       SYNTAX      MacNotifyCtrlEntry 
       MAX-ACCESS  not-accessible 
       STATUS      current 
       DESCRIPTION 
           "An entry appears in this table for each interface 
            in the system."
       INDEX { macNotifyCtrlIndex }
       ::= { macNotifyCtrlTable 1 }
       
    MacNotifyCtrlEntry ::= 
       SEQUENCE { 
          macNotifyCtrlIndex
             Integer32, 
          macNotifyPortStatus 
             INTEGER
      }
    
    macNotifyCtrlIndex OBJECT-TYPE 
       SYNTAX      Integer32 
       MAX-ACCESS  read-only 
       STATUS      current 
       DESCRIPTION 
          "The interface index of the port for which the configuration
          in this entry applies."
       ::= { macNotifyCtrlEntry 1 }
        
    macNotifyPortStatus OBJECT-TYPE 
       SYNTAX      INTEGER {
                   enabled(1),
                   disabled(2)
                   }
       MAX-ACCESS  read-write 
       STATUS      current 
       DESCRIPTION 
           "Provides control to per port enable or disable the loopback detection 
            function. Default is disabled."
       DEFVAL  { disabled }
       ::= { macNotifyCtrlEntry 2 }         
    --
    -- LLDP  Settings
    --

    dlinklldpState  OBJECT-TYPE
       SYNTAX       INTEGER {
                    enable(1),
                    disable(2)
                   }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
            "This object is used for enabling or disabling LLDP in the system."

       DEFVAL  { disable }
       ::= { companyLLDPSetting 1 }

    dlinklldpMsgHoldMultiplier OBJECT-TYPE
        SYNTAX      INTEGER (2..10)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The time-to-live value expressed as a multiple of the
            lldpMessageTxInterval object.The actual time-to-live value
            used in LLDP frames, transmitted on behalf of this LLDP agent,
            can be expressed by the following formula: TTL = min(65535,
            (lldpMessageTxInterval * lldpMessageTxHoldMultiplier))"
        --DEFVAL     { 4 }

        ::= { companyLLDPSetting 2 }

    dlinklldpMsgTxInterval OBJECT-TYPE
        SYNTAX      INTEGER (5..32768)
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION
            "This object is used for LLDP packet update frequency.
            The timer in units of seconds."
        --DEFVAL     { 30 }

        ::= { companyLLDPSetting 3 }

    dlinklldpReinitDelay OBJECT-TYPE
        SYNTAX      INTEGER (1..10)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
        	"This object is used for LLDP Reinitialization Delay.
        	The timer in units of seconds."
        --DEFVAL     { 2 }

        ::= { companyLLDPSetting 4 }

    dlinklldpTxDelay OBJECT-TYPE
        SYNTAX      INTEGER (1..8192)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
        	"The lldpTxDelay indicates the delay (in units
         	of seconds) between successive LLDP frame transmissions 
         	initiated by value/status changes in the LLDP local systems
         	MIB.  The recommended value for the lldpTxDelay is set by the
         	following  formula:
 	
 	        1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)."
        --DEFVAL     { 2 }

        ::= { companyLLDPSetting 5 }
        
--
-- lldpManAddrConfigTxPortsTable : selection of management addresses
--                                 to be transmitted on a specified set
--                                 of ports.
-- 

    dlinklldpConfigManAddrPortsTxEnable  OBJECT-TYPE
        SYNTAX        PortList
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION
            "A set of ports that are identified by a PortList, in which
            each port is represented as a bit.  The corresponding local
            system management address instance will be transmitted on the
            member ports of the lldpManAddrPortsTxEnable.  
            
            The default value for lldpConfigManAddrPortsTxEnable object
            is empty binary string, which means no ports are specified
            for advertising indicated management address instance."
        REFERENCE 
                "IEEE 802.1AB-2005 10.2.1.1"

        ::= { companyLLDPSetting 6 }
    
    --
    -- LLDP-MED for PoE Port Settings
    --

    lldpMEDPortControlTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF LldpMEDPortControlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A table that contains LLDP-MED control,
            A row appears in this table for each physical port."
        ::= { companyLLDPSetting 7 }

    lldpMEDPortControlEntry OBJECT-TYPE
        SYNTAX      LldpMEDPortControlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A list of LLDP-MED for PoE Port Settings
            parameters for each Port on this device."
        INDEX      { lldpMEDPortControlIndex }
      ::= { lldpMEDPortControlTable 1 }

    LldpMEDPortControlEntry ::=
      SEQUENCE {
        lldpMEDPortControlIndex
            InterfaceIndex,
        lldpMEDPortState
            INTEGER
    }

    lldpMEDPortControlIndex OBJECT-TYPE
        SYNTAX       InterfaceIndex
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION
            "The Control Index of the LLDP-MED Power PSE TLV port."
      ::= { lldpMEDPortControlEntry 1 }

    lldpMEDPortState  OBJECT-TYPE
      SYNTAX       INTEGER { enabled(1), disabled(2) }
      MAX-ACCESS   read-write
      STATUS       current
      DESCRIPTION
            "This object is for enabling or disabling LLDP-MED 
            Power PSE TLV Setting in the system."
      ::= { lldpMEDPortControlEntry 2 }
    ipMacPortBinding         OBJECT IDENTIFIER ::= { companySecurity 4}
 
	ipMacPortBindingSystemMode OBJECT-TYPE 
	   SYNTAX      INTEGER {
	                  disable      (0)
	                  ,modeARP      (1)
	               }
	   MAX-ACCESS  read-write
	   STATUS      current 
	   DESCRIPTION 
	      "The system wide ACL mode in IPMB."
	   ::= { ipMacPortBinding 1 }
	
	ipMacPortBindingTrapLogEnable OBJECT-TYPE 
	   SYNTAX      INTEGER {
	                enable(1),
	                disable(2)
	               }
	   MAX-ACCESS  read-write
	   STATUS      current 
	   DESCRIPTION 
	      "The trap event option in IPMB."
	   ::= { ipMacPortBinding 2 }
	
	ipMacPortBindingEnabledPortList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Specifies the port numbers which  check incoming IP address and 
	        MAC address if issIpMacPortBindingStatus is enable."
	   ::= { ipMacPortBinding 3 }
	
	allowZeroIPPortList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Specifies the port numbers which don't check incoming IP address and 
	        MAC address if issIpMacPortBindingStatus is enable."
	   ::= { ipMacPortBinding 4 }
	
	
	-- IpMacPortBinding Control Table
	
	ipMacPortBindingTable OBJECT-TYPE 
	   SYNTAX      SEQUENCE OF IpMacPortBindingEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	      "A table to control IP-MAC-Port Binding features either for the entire 
	       switch or for each interface in the switch.
	      
	       Parameters in this table are valid only when the 
	       'issIpMacPortStatus' for the switch is not 'disabled'."
	   ::= { ipMacPortBinding 5 }
	
	ipMacPortBindingEntry OBJECT-TYPE 
	   SYNTAX      IpMacPortBindingEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	       "An entry appears in this table for each interface 
	        in the system."
	   INDEX { ipMacPortBindingIpAddr, ipMacPortBindingMacAddress }
	   ::= { ipMacPortBindingTable 1 }
	
	IpMacPortBindingEntry ::=
	   SEQUENCE {
	      ipMacPortBindingIpAddr
	         IpAddress,
	      ipMacPortBindingMacAddress
	         MacAddress,
	      ipMacPortBindingPortList
	         PortList,
	      ipMacPortBindingRowStatus
	         RowStatus
	   }
	 
	 
	ipMacPortBindingIpAddr OBJECT-TYPE
	   SYNTAX      IpAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	       "Specifies either the Network or Host address from which the switch
	        can be managed.
	        An address 0.0.0.0 indicates 'Any Manager'."
	   ::= { ipMacPortBindingEntry 1 }
	
	
	ipMacPortBindingMacAddress OBJECT-TYPE 
	   SYNTAX      MacAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current 
	   DESCRIPTION 
	      "Ethernet Mac Address."
	      
	   ::= { ipMacPortBindingEntry 2 }
	
	ipMacPortBindingPortList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Specifies the port numbers through which the authorized manager can
	        access the switch. 
	
	        By default the authorized manager is allowed to access the switch 
	        through all the ports.
	
	        If a set of ports are configured in the 'PortList', the manager can
	        access the switch only through the configured ports."
	   ::= { ipMacPortBindingEntry 3 }


	ipMacPortBindingRowStatus OBJECT-TYPE
	   SYNTAX      RowStatus
	   MAX-ACCESS  read-create
	   STATUS      current
	   DESCRIPTION
	      "This object indicates the status of this entry."
	   ::= { ipMacPortBindingEntry 5 }
	  
	-- MAC BLOCK List  ------------------------------------------------------
	
	macBlockListTable OBJECT-TYPE 
	   SYNTAX      SEQUENCE OF MacBlockListEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	       "An entry appears in this table for each interface 
	        in the system."
	   ::= { ipMacPortBinding 6 }
	
	macBlockListEntry OBJECT-TYPE 
	   SYNTAX      MacBlockListEntry 
	   MAX-ACCESS  not-accessible 
	   STATUS      current 
	   DESCRIPTION 
	       "An entry appears in this table for each interface 
	        in the system."
	   INDEX { macBlockListMacAddr,macBlockListVLANID,macBlockListPort }
	   ::= { macBlockListTable 1 }
	
	MacBlockListEntry ::=
	   SEQUENCE {
	      macBlockListMacAddr
	         MacAddress,
	      macBlockListVLANID
	         Integer32,
	      macBlockListPort
	         Integer32,
	      macBlockListRowStatus
	         RowStatus
	   }

	macBlockListMacAddr OBJECT-TYPE
	   SYNTAX      MacAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	       "Blocked Mac Address."
	   ::= { macBlockListEntry 1 }
	
	
	macBlockListVLANID OBJECT-TYPE 
	   SYNTAX      Integer32
	   MAX-ACCESS  not-accessible
	   STATUS      current 
	   DESCRIPTION 
	      "Blocked IP."
	      
	   ::= { macBlockListEntry 2 }
	
	macBlockListPort OBJECT-TYPE
	   SYNTAX       Integer32
	   MAX-ACCESS   not-accessible
	   STATUS       current
	   DESCRIPTION
	       "Blocked port."
	   ::= { macBlockListEntry 3 }
	
	macBlockListRowStatus OBJECT-TYPE
	   SYNTAX      RowStatus
	   MAX-ACCESS  read-create
	   STATUS      current
	   DESCRIPTION
	      "This object indicates the status of this entry."
	   ::= { macBlockListEntry 4 }  
 -- ----------------------------------------------------------
 -- The companySecurity Groups
 -- ----------------------------------------------------------
    securityDhcpServerScreen                  OBJECT IDENTIFIER ::= { companySecurity 7 }
 -- dhcp Server Screen Group --------------------------------------------- --

    dhcpServerScreenEnablePortlist OBJECT-TYPE
       SYNTAX      PortList
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
           "To enable or disable DHCP Server Screening port list."
       ::= { securityDhcpServerScreen 1 }

	-- filterDHCPServer Table

	filterDHCPServerTable OBJECT-TYPE
	   SYNTAX      SEQUENCE OF FilterDHCPServerEntry
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	      "A table to control filter DHCP Server for the entire
	       switch or for each interface in the switch."
	   ::= { securityDhcpServerScreen 2 }

	filterDHCPServerEntry OBJECT-TYPE
	   SYNTAX      FilterDHCPServerEntry
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	       "An entry appears in this table for each interface
	        in the system."
	   INDEX { filterDHCPServerIpAddr, filterDHCPServerClientMacAddr }
	   ::= { filterDHCPServerTable 1 }

	FilterDHCPServerEntry ::=
	   SEQUENCE {
	      filterDHCPServerIpAddr
	         IpAddress,
	      filterDHCPServerClientMacAddr
	         MacAddress,
	      filterDHCPServerPortList
	         PortList,
	      filterDHCPServerRowStatus
	         RowStatus
	   }


	filterDHCPServerIpAddr OBJECT-TYPE
	   SYNTAX      IpAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	       "Specifies either the Network or Host address from which the switch
	        can be managed.
	        An address 0.0.0.0 indicates 'Any Manager'."
	   ::= { filterDHCPServerEntry 1 }


	filterDHCPServerClientMacAddr OBJECT-TYPE
	   SYNTAX      MacAddress
	   MAX-ACCESS  not-accessible
	   STATUS      current
	   DESCRIPTION
	      "Ethernet Mac Address."

	   DEFVAL  { '000102030405'h }
	   ::= { filterDHCPServerEntry 2 }

	filterDHCPServerPortList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Specifies the port numbers through which the authorized manager can
	        access the switch.

	        By default the authorized manager is allowed to access the switch
	        through all the ports.

	        If a set of ports are configured in the 'PortList', the manager can
	        access the switch only through the configured ports."
	   ::= { filterDHCPServerEntry 3 }

	filterDHCPServerRowStatus OBJECT-TYPE
	   SYNTAX      RowStatus
	   MAX-ACCESS  read-create
	   STATUS      current
	   DESCRIPTION
	      "This object indicates the status of this entry."
	   ::= { filterDHCPServerEntry 4 }
    securityTrafficSeg                  OBJECT IDENTIFIER ::= { companySecurity 9}
  

    --
    -- Port Map Table
    --
    
    trafficSegTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF TrafficSegEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "A Port-channel is created through ifMain table.
           After the creation of the port-channel, corresponding logical
           interface will be created in the ifMain table. 
           This Port-channel table is indexed through Key values and allows to 
           configure link selection policy and the Mac address for 
           the port-channel. All other objects in this table displays 
           the details of the port-channel"

        ::= { securityTrafficSeg 1 }

    trafficSegEntry OBJECT-TYPE
        SYNTAX     TrafficSegEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "There is one entry in this table for each created
               port-channel port"

        INDEX { trafficSegIfIndex }
        ::= { trafficSegTable 1 }

    TrafficSegEntry ::= 
            SEQUENCE {
              trafficSegIfIndex                InterfaceIndex,
              trafficSegMemberList             PortList
              }

    trafficSegIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
              "The ifIndex of the port-channel(Aggregator's 
               interface index). "
        ::= { trafficSegEntry 1 }

  	trafficSegMemberList OBJECT-TYPE
	   SYNTAX       PortList
	   MAX-ACCESS   read-write
	   STATUS       current
	   DESCRIPTION
	       "Port list of port channel."
	   ::= { trafficSegEntry 2 }

        
    
 -- ----------------------------------------------------------
 -- The companySecurity Groups
 -- ----------------------------------------------------------      	
    securityAAC                  OBJECT IDENTIFIER ::= { companySecurity 10 }

-- -------------------------------------------------------------
-- Authentication Policy and Parameter Settings
-- -------------------------------------------------------------
    aacAuthenAdminState OBJECT-TYPE
	    SYNTAX  INTEGER {
	                enabled(1),
	                disabled(2)
	            }
	    MAX-ACCESS  read-write
	    STATUS  current
	    DESCRIPTION
	        "This object indicates the Access Authentication is enable or 
	        disable."
	    ::= { securityAAC 1}    
 

	aacAuthParamResponseTimeout  OBJECT-TYPE
		    SYNTAX     INTEGER (0..255)
		    MAX-ACCESS read-write
		    STATUS     current
		    DESCRIPTION
		        "Timeout in second for login authentication response."
		    ::= { securityAAC 2 }   
	
	aacAuthParamAttempt  OBJECT-TYPE
		    SYNTAX     INTEGER (1..255)
		    MAX-ACCESS read-write
		    STATUS     current
		    DESCRIPTION
		        "The amount for login authentication, if login failure exceed,
		         connection or access would be locked."
		    ::= { securityAAC 3 }         	    

-- -------------------------------------------------------------
-- Application Authentication Settings
-- -------------------------------------------------------------

    aacAPAuthMethodGroup OBJECT IDENTIFIER ::= { securityAAC 4 }

	aacAPLoginMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 1 }
	aacAPEnableMethod OBJECT IDENTIFIER ::= { aacAPAuthMethodGroup 2 }

	aacAPConsoleLoginMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via local 
	        console"
	
	    ::= { aacAPLoginMethod 1 }
	    
	aacAPTelnetLoginMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via telnet."
	
	    ::= { aacAPLoginMethod 2 }
	
	aacAPSSHLoginMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via SSH."
	
	    ::= { aacAPLoginMethod 3 }
	
	aacAPHttpLoginMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via HTTP."
	
	    ::= { aacAPLoginMethod 4 }
	
	aacAPConsoleEnableMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via local 
	        console."
	    ::= { aacAPEnableMethod 1 }
	    
	aacAPTelnetEnableMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via telnet."
	
	    ::= { aacAPEnableMethod 2 }
	
	aacAPSSHEnableMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via SSH."
	
	    ::= { aacAPEnableMethod 3 }
	
	aacAPHttpEnableMethod OBJECT-TYPE
	    SYNTAX INTEGER (1..8)
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "Specify the way which has to execute authentication while login the
	        system and the method for authentication.Access system via HTTP."
	
	    ::= { aacAPEnableMethod 4 } 

	    
-- -------------------------------------------------------------
-- Authentication Server Group setting
-- -------------------------------------------------------------
	aacServerGroupTable OBJECT-TYPE
	    SYNTAX SEQUENCE OF AacServerGroupEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A table that contains informations about server group."
	    ::= { securityAAC 5 }
	    
	aacServerGroupEntry OBJECT-TYPE
	    SYNTAX AacServerGroupEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A list of the group including servers."
	    INDEX { aacServerGroupIndex }
	    ::= { aacServerGroupTable 1 }
	    
	AacServerGroupEntry ::=
	    SEQUENCE {
	    	aacServerGroupIndex
				INTEGER, 
	        aacServerGroupName
	            OCTET STRING,
			aacServersInGroup
				BITS,
            aacServerGroupRowStatus
	            RowStatus            
	    }
	        
	aacServerGroupIndex  OBJECT-TYPE
	    SYNTAX     INTEGER (2..9)
	    MAX-ACCESS read-only
	    STATUS     current
	    DESCRIPTION
	        "A value that uniquely identifies this SwAACServerGroupEntry ."
	        
	    ::= { aacServerGroupEntry 1 }   
		    	
	aacServerGroupName OBJECT-TYPE
	    SYNTAX OCTET STRING (SIZE (1..15))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "A human-readable text string of the method group. 
	         The name is writable only if Group is new created, 
	         which the value of aacServerGroupRowStatus is 'notReady'."
	
	    ::= { aacServerGroupEntry 2 }

	
	aacServersInGroup OBJECT-TYPE
	    SYNTAX      BITS {          
	        id_1(0),
            id_2(1),
            id_3(2),
            id_4(3),
            id_5(4),
            id_6(5),
            id_7(6),
            id_8(7),
            id_9(8),
            id_10(9),
            id_11(10),
            id_12(11),
            id_13(12),
            id_14(13),
            id_15(14),
            id_16(15)            
        }
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "The list of servers in the group, each bit indicates a specified server ID.
	         The server must be created before including it."
	        
	    ::= { aacServerGroupEntry 3 }
	
	aacServerGroupRowStatus	OBJECT-TYPE
	    SYNTAX      RowStatus
	    MAX-ACCESS  read-create
	    STATUS      current
	    DESCRIPTION
	        "This object indicates the status of this entry. An entry is
            created in this table when this object is SET to 'createAndWait'.
            The entry in this table is used when the status of this object 
            is SET 'active'. The entry in this table is not used when this 
            object is SET 'notInService'. An entry created in this table is
            be deleted when this object is SET 'destroy'."
	         
	    ::= { aacServerGroupEntry 4 }   


-- -------------------------------------------------------------
-- Authentication Server host setting
-- -------------------------------------------------------------

	aacServerInfoTable OBJECT-TYPE
	    SYNTAX SEQUENCE OF AacServerInfoEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A table that contains information about severs."
	    ::= { securityAAC 6 }
	    
	aacServerInfoEntry OBJECT-TYPE
	    SYNTAX AacServerInfoEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A list of the information of server ."
	    INDEX { aacServerIndex }
	    ::= { aacServerInfoTable 1 }
	    
	AacServerInfoEntry ::=
	    SEQUENCE {
	        aacServerIndex
	        	INTEGER, 
			aacServerIPAddr
				IpAddress,
			aacServerAuthProtocol
				INTEGER,
			aacServerAuthPort
				INTEGER,	
			aacServerAuthKey
				OCTET STRING,						
	        aacServerTimeout
	            INTEGER,   
	        aacServerRetryCount
	            INTEGER,                                     
	        aacServerRowStatus
	            RowStatus            
	    }   
	    
    aacServerIndex  OBJECT-TYPE
	    SYNTAX     INTEGER (1..16)
	    MAX-ACCESS read-only
	    STATUS     current
	    DESCRIPTION
	        "A value that uniquely identifies this SwAACServerGroupEntry."
	        
	    ::= { aacServerInfoEntry 1 }  
	    
	aacServerIPAddr OBJECT-TYPE
	    SYNTAX      IpAddress
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "The IP address of Server"
	    ::= { aacServerInfoEntry 2 }
	
	aacServerAuthProtocol OBJECT-TYPE
	    SYNTAX      INTEGER{
	                    tacacs-plus(1)
	                    ,radius(2)  
	                }
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "The authentication protocol provided by the Server."
	    ::= { aacServerInfoEntry 3 }
	
	aacServerAuthPort OBJECT-TYPE
	    SYNTAX      INTEGER(1..65535)
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "The TCP/IP port ."
	    ::= { aacServerInfoEntry 4 }
	
	aacServerAuthKey OBJECT-TYPE
	    SYNTAX OCTET STRING (SIZE (1..254))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The key used while authentication process."
	
	    ::= { aacServerInfoEntry 5 }
	
	aacServerTimeout OBJECT-TYPE
	    SYNTAX      INTEGER(1..255)
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "Server response timeout ."
	    ::= { aacServerInfoEntry 6 }
	    
	aacServerRetryCount OBJECT-TYPE
	    SYNTAX      INTEGER(1..255)
	    MAX-ACCESS  read-write
	    STATUS      current
	    DESCRIPTION
	        "The client retry count ."
	    ::= { aacServerInfoEntry 7 }    
	
	aacServerRowStatus OBJECT-TYPE
	    SYNTAX      RowStatus
	    MAX-ACCESS  read-create
	    STATUS      current
	    DESCRIPTION
	        "This object indicates the status of this entry. An entry is
            created in this table when this object is SET to 'createAndWait'.
            The entry in this table is used when the status of this object 
            is SET 'active'. The entry in this table is not used when this 
            object is SET 'notInService'. An entry created in this table is
            be deleted when this object is SET 'destroy'."     

	    ::= { aacServerInfoEntry 8 }
	    
-- -------------------------------------------------------------
-- Login Method list table 
-- -------------------------------------------------------------

	aacLoginMethodListTable OBJECT-TYPE
	    SYNTAX SEQUENCE OF AacLoginMethodListEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A table that contains information about Login authentication method 
	        lists."
	        
	    ::= { securityAAC 7 }
	    
	aacLoginMethodListEntry OBJECT-TYPE
	    SYNTAX AacLoginMethodListEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A list of the Authentication methods."
	    INDEX { aacLoginMethodListIndex }
	    
	    ::= { aacLoginMethodListTable 1 }
	
	AacLoginMethodListEntry ::=
	    SEQUENCE {
	    	aacLoginMethodListIndex
				INTEGER, 
	        aacLoginMethodListName
	            OCTET STRING,
	        aacLoginMethod1
	        	INTEGER,				   	                    
	        aacLoginMethod2
	        	INTEGER,				   	                    
	        aacLoginMethod3
	        	INTEGER,				   	                    
	        aacLoginMethod4
	        	INTEGER,				   	                    
			aacLoginMethodListRowStatus            
				RowStatus                   
	
	    }

	aacLoginMethodListIndex  OBJECT-TYPE
	    SYNTAX     INTEGER (1..8)
	    MAX-ACCESS read-only
	    STATUS     current
	    DESCRIPTION
	        "A value that identifies this method list."
	        
	    ::= { aacLoginMethodListEntry 1 }	
	
	aacLoginMethodListName OBJECT-TYPE
	    SYNTAX OCTET STRING (SIZE (1..15))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "A human-readable text string of the method list."
	
	    ::= { aacLoginMethodListEntry 2 }

	aacLoginMethod1 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacLoginMethodListEntry 3 }
	    	    
	aacLoginMethod2 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacLoginMethodListEntry 4 }
	
	aacLoginMethod3 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacLoginMethodListEntry 5 }
	    	    
	aacLoginMethod4 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacLoginMethodListEntry 6 }
	    	    
	aacLoginMethodListRowStatus OBJECT-TYPE
	    SYNTAX      RowStatus
	    MAX-ACCESS  read-create
	    STATUS      current
	    DESCRIPTION
	        "This object indicates the status of this entry. An entry is
            created in this table when this object is SET to 'createAndWait'.
            The entry in this table is used when the status of this object 
            is SET 'active'. The entry in this table is not used when this 
            object is SET 'notInService'. An entry created in this table is
            be deleted when this object is SET 'destroy'."
	        
	    ::= { aacLoginMethodListEntry 7 }    

-- -------------------------------------------------------------
-- Enable Method table 
-- -------------------------------------------------------------
	aacEnableMethodListTable OBJECT-TYPE
	    SYNTAX SEQUENCE OF AacEnableMethodListEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A table that contains information about Enable authentication method 
	        lists."
	        
	    ::= { securityAAC 8 }
	    
	aacEnableMethodListEntry OBJECT-TYPE
	    SYNTAX AacEnableMethodListEntry
	    MAX-ACCESS not-accessible
	    STATUS current
	    DESCRIPTION
	        "A list of the Authentication methods."
	    INDEX { aacEnableMethodListIndex }
	    
	    ::= { aacEnableMethodListTable 1 }
	
	AacEnableMethodListEntry ::=
	    SEQUENCE {
	    	aacEnableMethodListIndex
				INTEGER, 
	        aacEnableMethodListName
	            OCTET STRING,
	        aacEnableMethod1
	        	INTEGER,	      
	        aacEnableMethod2
	        	INTEGER,	   
	        aacEnableMethod3
	        	INTEGER,	      
	        aacEnableMethod4
	        	INTEGER,	   	            	                          
			aacEnableMethodListRowStatus            
				RowStatus	
	    }

	aacEnableMethodListIndex  OBJECT-TYPE
	    SYNTAX     INTEGER (1..8)
	    MAX-ACCESS read-only
	    STATUS     current
	    DESCRIPTION
	        "A value that identifies this method list."
	        
	    ::= { aacEnableMethodListEntry 1 }	
	
	aacEnableMethodListName OBJECT-TYPE
	    SYNTAX OCTET STRING (SIZE(1..15))
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "A human-readable text string of the method list."
	
	    ::= { aacEnableMethodListEntry 2 }

	aacEnableMethod1 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacEnableMethodListEntry 3 }
	    	    
	aacEnableMethod2 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacEnableMethodListEntry 4 }
	    	    
	aacEnableMethod3 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacEnableMethodListEntry 5 }
	    	    
	aacEnableMethod4 OBJECT-TYPE
	    SYNTAX INTEGER {
	                none(-1),
                    local(0)
                    ,tacacs-plus(1)
	                ,radius(2)
	            }
	    MAX-ACCESS read-write
	    STATUS current
	    DESCRIPTION
	        "The type of Login method list. Besides the pre-defined type, it 
	         also allow to be set user-defined group by aacServerGroupIndex."
	        
	    ::= { aacEnableMethodListEntry 6 }
    	    	    
	aacEnableMethodListRowStatus OBJECT-TYPE
	    SYNTAX      RowStatus
	    MAX-ACCESS  read-create
	    STATUS      current
	    DESCRIPTION
	        "This object indicates the status of this entry. An entry is
            created in this table when this object is SET to 'createAndWait'.
            The entry in this table is used when the status of this object 
            is SET 'active'. The entry in this table is not used when this 
            object is SET 'notInService'. An entry created in this table is
            be deleted when this object is SET 'destroy'."

	    ::= { aacEnableMethodListEntry 7 }     

-- -------------------------------------------------------------
-- Local Enable Password
-- -------------------------------------------------------------
   aacLocalEnablePassword  OBJECT-TYPE
   SYNTAX      DisplayString (SIZE(1..15))
   MAX-ACCESS  read-write
   STATUS      current
   DESCRIPTION 
      "This object is used to set Local Enable Password."
   ::= { securityAAC 9 } 

    -- ------------------------------------------------------------------
    -- The SMTP Group
    -- ------------------------------------------------------------------

      smtpState OBJECT-TYPE
           SYNTAX      INTEGER {  disabled(0),enabled(1) }
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
               "Enable or Disable SMTP function."

           ::= { companySMTP 1 }

      smtpServerAddr  OBJECT-TYPE
           SYNTAX      IpAddress
           MAX-ACCESS  read-write
           STATUS      current
           DESCRIPTION
              "SMTP Server's IP Address"
            ::= { companySMTP 2 }

      smtpServerPort OBJECT-TYPE
            SYNTAX INTEGER
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
                "SMTP Server's port"
            ::= { companySMTP 3}

      smtpSelfMailAddr OBJECT-TYPE
            SYNTAX      OCTET STRING
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "The sender's (DUT) mail address ."
            ::= { companySMTP  4 }
        
        

    -- ------------------------------------------------------------------
    -- smtpRecvMailAddrTable
    -- ------------------------------------------------------------------
    
    smtpRecvMailAddrTable  OBJECT-TYPE
        SYNTAX     SEQUENCE OF SmtpRecvMailAddrEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
           "Receivers' mail address table."

        ::= { companySMTP 5 }

    smtpRecvMailAddrEntry OBJECT-TYPE
        SYNTAX     SmtpRecvMailAddrEntry 
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
              "Receivers' mail address entry."

        INDEX { smtpRecvMailAddrIndex }
        ::= { smtpRecvMailAddrTable 1 }

    SmtpRecvMailAddrEntry  ::= 
            SEQUENCE {
              smtpRecvMailAddrIndex          INTEGER,
              smtpRecvMailAddr               OCTET STRING,
              smtpRecvMailAddrStatus         RowStatus
              }

    smtpRecvMailAddrIndex OBJECT-TYPE
       SYNTAX       INTEGER
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
         "Receivers' mail address index (1~8)." 
        ::= { smtpRecvMailAddrEntry  1 }

    smtpRecvMailAddr OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "Receivers' mail address."
        ::= { smtpRecvMailAddrEntry  2 }
        
    smtpRecvMailAddrStatus OBJECT-TYPE
       SYNTAX RowStatus
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
         "Rowstatus of the receiver's mail address."
       ::= { smtpRecvMailAddrEntry 3 }    

    igmpMulticastVlanStatus OBJECT-TYPE 
           SYNTAX      INTEGER {
                          enabled(1),
                          disabled(2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "Enable/Disable IGMP Multicast Vlan function."
        
           DEFVAL  { disabled }
           ::= { companyISMVLAN 1 }

     -- ----------------------------------------------------------
     -- igmpMulticastVlanTable Table 
     -- ----------------------------------------------------------
    
     igmpMulticastVlanTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IgmpMulticastVlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "Information about the IGMP snooping multicast VLAN table."
        ::= { companyISMVLAN 2 }
    
     igmpMulticastVlanEntry OBJECT-TYPE
        SYNTAX  IgmpMulticastVlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The entry of igmpMulticastVlanTable."
        INDEX  { igmpMulticastVlanid}
        ::= { igmpMulticastVlanTable 1 }

    IgmpMulticastVlanEntry ::= 
        SEQUENCE {
            igmpMulticastVlanid
                INTEGER,
            igmpMulticastVlanName
                DisplayString,
            igmpMulticastVlanSourcePort
                PortList,
            igmpMulticastVlanMemberPort
                PortList,
            igmpMulticastVlanTagMemberPort
            	PortList,
            igmpMulticastVlanState
            	INTEGER,
            igmpMulticastVlanReplaceSourceIp
            	IpAddress,
            igmpMulticastVlanRowStatus
                RowStatus
        }
        
    igmpMulticastVlanid OBJECT-TYPE
        SYNTAX  INTEGER (2..4094)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "This object indicates the VLAN ID of the IGMP snooping multicast 
             VLAN entry."
        ::= { igmpMulticastVlanEntry 1 }
        
    igmpMulticastVlanName OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (0..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the VLAN name of the IGMP snooping multicast 
             VLAN entry."
        ::= { igmpMulticastVlanEntry 2 }   
            
    igmpMulticastVlanSourcePort OBJECT-TYPE
        SYNTAX  PortList
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the port list of the source ports of the IGMP 
             snooping multicast VLAN. The source ports will be set as tag ports 
             of the VLAN entry and the IGMP control messages received from the
             member ports will be forwarded to the source ports."
        ::= { igmpMulticastVlanEntry 3 }   

    igmpMulticastVlanMemberPort OBJECT-TYPE
        SYNTAX  PortList
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the port list of the member ports of the IGMP 
             snooping multicast VLAN. The source ports will be set as untagged ports 
             of the VLAN entry and the IGMP control messages received from the
             member ports will be forwarded to the source ports."
        ::= { igmpMulticastVlanEntry 4 }      
        
    igmpMulticastVlanTagMemberPort OBJECT-TYPE
        SYNTAX  PortList
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object indicates the port list of the tag member ports of the IGMP 
             snooping multicast VLAN."
        ::= { igmpMulticastVlanEntry 5 }
    		
    igmpMulticastVlanState OBJECT-TYPE
        SYNTAX  INTEGER{
        	enabled(1),
        	disabled(2)
        	}
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "This object can be used to enable or disable the IGMP snooping multicast VLAN."
        ::= { igmpMulticastVlanEntry 6 }
            
    igmpMulticastVlanReplaceSourceIp OBJECT-TYPE
    	SYNTAX  IpAddress
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The replacement source IP of this multicast VLAN."
        ::= { igmpMulticastVlanEntry 7 }
        
    igmpMulticastVlanRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates the status of this entry."
        ::= { igmpMulticastVlanEntry 8 }         
          
    -- -----------------------------------------------------------------------------
    --  igmpMulticastVlanGroupTable	
    -- -----------------------------------------------------------------------------   
    igmpMulticastVlanGroupTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF IgmpMulticastVlanGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "The table containing the IGMP snooping multicast VLAN group information"
        ::= { companyISMVLAN 3 }

    igmpMulticastVlanGroupEntry OBJECT-TYPE
        SYNTAX  IgmpMulticastVlanGroupEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
            "Information about the current IGMP snooping multicast VLAN group."
        INDEX  { igmpMulticastVlanGroupVid, igmpMulticastVlanGroupFromIp, igmpMulticastVlanGroupToIp }
        ::= { igmpMulticastVlanGroupTable 1 }

    IgmpMulticastVlanGroupEntry ::= 
        SEQUENCE {
            igmpMulticastVlanGroupVid
                INTEGER,
            igmpMulticastVlanGroupFromIp
                IpAddress,
            igmpMulticastVlanGroupToIp
                IpAddress,                
            igmpMulticastVlanGroupStatus
                RowStatus
        }
    
    igmpMulticastVlanGroupVid	OBJECT-TYPE
	SYNTAX  INTEGER (1..4094)
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
            "This object indicates the VID of the IGMP snooping multicast VLAN group."
        ::= { igmpMulticastVlanGroupEntry 1 }
    
    igmpMulticastVlanGroupFromIp	OBJECT-TYPE
    	SYNTAX      IpAddress
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"Specifies the multicast address list for this VLAN."
    	::= { igmpMulticastVlanGroupEntry 2  }
    		
    igmpMulticastVlanGroupToIp	OBJECT-TYPE
    	SYNTAX      IpAddress
    	MAX-ACCESS  read-only
    	STATUS      current
    	DESCRIPTION
       		"Specifies the multicast address list for this VLAN."
    	::= { igmpMulticastVlanGroupEntry 3  }
    	
    igmpMulticastVlanGroupStatus	OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS read-create
        STATUS   current
        DESCRIPTION
        	"This object indicates the status of this entry."		
        ::= { igmpMulticastVlanGroupEntry 4 }
    
          
        -- ----------------------------------------------------------------
        -- The RMON group
        -- ----------------------------------------------------------------
      rmonGlobalState OBJECT-TYPE 
           SYNTAX      INTEGER {
                          enabled(1),
                          disabled(2)
                       }
           MAX-ACCESS  read-write 
           STATUS      current 
           DESCRIPTION 
               "This object is for enabling or disabling RMON function."
        
           ::= { companyRMON 1 }

     rmonStatistics        OBJECT IDENTIFIER ::= { companyRMON 2 }
     rmonHistory           OBJECT IDENTIFIER ::= { companyRMON 3 }
     rmonAlarm             OBJECT IDENTIFIER ::= { companyRMON 4 }
     rmonEvent             OBJECT IDENTIFIER ::= { companyRMON 5 }
     
-- The Ethernet Statistics Group
 --
 -- Implementation of the Ethernet Statistics group is optional.
 -- Consult the MODULE-COMPLIANCE macro for the authoritative
 -- conformance information for this MIB.
 --
 -- The ethernet statistics group contains statistics measured by the
 -- probe for each monitored interface on this device.  These
 -- statistics take the form of free running counters that start from
 -- zero when a valid entry is created.
 --
 -- This group currently has statistics defined only for
 -- Ethernet interfaces.  Each etherStatsEntry contains statistics
 -- for one Ethernet interface.  The probe must create one
 -- etherStats entry for each monitored Ethernet interface
 -- on the device.

 rmonStatsTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF RmonStatsEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of Ethernet statistics entries."
     ::= { rmonStatistics 1 }

 rmonStatsEntry OBJECT-TYPE
     SYNTAX     RmonStatsEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A collection of statistics kept for a particular
         Ethernet interface.  As an example, an instance of the
         etherStatsPkts object might be named etherStatsPkts.1"
     INDEX { rmonStatsIndex }
     ::= { rmonStatsTable 1 }

 RmonStatsEntry ::= SEQUENCE {
     rmonStatsIndex                    Integer32,
     rmonStatsDataSource               OBJECT IDENTIFIER,
     rmonStatsOwner                    OwnerString,
     rmonStatsStatus                   RmonStatus
 }

 rmonStatsIndex OBJECT-TYPE
     SYNTAX     Integer32 (1..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "The value of this object uniquely identifies this
         etherStats entry."
     ::= { rmonStatsEntry 1 }

 rmonStatsDataSource OBJECT-TYPE
     SYNTAX     OBJECT IDENTIFIER
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "This object identifies the source of the data that
         this etherStats entry is configured to analyze.  This
         source can be any ethernet interface on this device.
         In order to identify a particular interface, this object
         shall identify the instance of the ifIndex object,
         defined in RFC 2233 [17], for the desired interface.
         For example, if an entry were to receive data from
         interface #1, this object would be set to ifIndex.1.

         The statistics in this group reflect all packets
         on the local network segment attached to the identified
         interface.

         An agent may or may not be able to tell if fundamental
         changes to the media of the interface have occurred and
         necessitate an invalidation of this entry.  For example, a
         hot-pluggable ethernet card could be pulled out and replaced
         by a token-ring card.  In such a case, if the agent has such
         knowledge of the change, it is recommended that it
         invalidate this entry.

         This object may not be modified if the associated
         etherStatsStatus object is equal to valid(1)."
     ::= { rmonStatsEntry 2 }

 rmonStatsOwner OBJECT-TYPE
     SYNTAX     OwnerString
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The entity that configured this entry and is therefore
         using the resources assigned to it."
     ::= { rmonStatsEntry 3 }

 rmonStatsStatus OBJECT-TYPE
     SYNTAX     RmonStatus
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The status of this etherStats entry."
     ::= { rmonStatsEntry 4 }
     

 -- The History Control Group

 -- Implementation of the History Control group is optional.
 -- Consult the MODULE-COMPLIANCE macro for the authoritative
 -- conformance information for this MIB.
 --
 -- The history control group controls the periodic statistical
 -- sampling of data from various types of networks.  The
 -- historyControlTable stores configuration entries that each
 -- define an interface, polling period, and other parameters.
 -- Once samples are taken, their data is stored in an entry
 -- in a media-specific table.  Each such entry defines one
 -- sample, and is associated with the historyControlEntry that
 -- caused the sample to be taken.  Each counter in the
 -- etherHistoryEntry counts the same event as its similarly-named
 -- counterpart in the etherStatsEntry, except that each value here
 -- is a cumulative sum during a sampling period.
 --
 -- If the probe keeps track of the time of day, it should start
 -- the first sample of the history at a time such that
 -- when the next hour of the day begins, a sample is
 -- started at that instant.  This tends to make more
 -- user-friendly reports, and enables comparison of reports
 -- from different probes that have relatively accurate time
 -- of day.
 --
 -- The probe is encouraged to add two history control entries
 -- per monitored interface upon initialization that describe a short
 -- term and a long term polling period.  Suggested parameters are 30
 -- seconds for the short term polling period and 30 minutes for
 -- the long term period.

 rmonHistoryTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF RmonHistoryEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of history control entries."
     ::= { rmonHistory 1 }

 rmonHistoryEntry OBJECT-TYPE
     SYNTAX     RmonHistoryEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of parameters that set up a periodic sampling of
         statistics.  As an example, an instance of the
         historyControlInterval object might be named
         historyControlInterval.2"
     INDEX { rmonHistoryIndex }
     ::= { rmonHistoryTable 1 }

 RmonHistoryEntry ::= SEQUENCE {
     rmonHistoryIndex             Integer32,
     rmonHistoryDataSource        OBJECT IDENTIFIER,
     rmonHistoryBucketsRequested  Integer32,
     rmonHistoryInterval          Integer32,
     rmonHistoryOwner             OwnerString,
     rmonHistoryStatus            RmonStatus
 }

 rmonHistoryIndex OBJECT-TYPE
     SYNTAX     Integer32 (1..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "An index that uniquely identifies an entry in the
         historyControl table.  Each such entry defines a
         set of samples at a particular interval for an
         interface on the device."
     ::= { rmonHistoryEntry 1 }

 rmonHistoryDataSource OBJECT-TYPE
     SYNTAX     OBJECT IDENTIFIER
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "This object identifies the source of the data for
         which historical data was collected and
         placed in a media-specific table on behalf of this
         historyControlEntry.  This source can be any
         interface on this device.  In order to identify

         a particular interface, this object shall identify
         the instance of the ifIndex object, defined
         in  RFC 2233 [17], for the desired interface.
         For example, if an entry were to receive data from
         interface #1, this object would be set to ifIndex.1.

         The statistics in this group reflect all packets
         on the local network segment attached to the identified
         interface.

         An agent may or may not be able to tell if fundamental
         changes to the media of the interface have occurred and
         necessitate an invalidation of this entry.  For example, a
         hot-pluggable ethernet card could be pulled out and replaced
         by a token-ring card.  In such a case, if the agent has such
         knowledge of the change, it is recommended that it
         invalidate this entry.

         This object may not be modified if the associated
         historyControlStatus object is equal to valid(1)."
     ::= { rmonHistoryEntry 2 }

 rmonHistoryBucketsRequested OBJECT-TYPE
     SYNTAX     Integer32 (1..65535)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The requested number of discrete time intervals
         over which data is to be saved in the part of the
         media-specific table associated with this
         historyControlEntry.

         When this object is created or modified, the probe
         should set historyControlBucketsGranted as closely to
         this object as is possible for the particular probe
         implementation and available resources."
     DEFVAL { 50 }
     ::= { rmonHistoryEntry 3 }

 rmonHistoryInterval OBJECT-TYPE
     SYNTAX     Integer32 (1..3600)
     UNITS      "Seconds"
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The interval in seconds over which the data is
         sampled for each bucket in the part of the
         media-specific table associated with this
         historyControlEntry.  This interval can
         be set to any number of seconds between 1 and
         3600 (1 hour).

         Because the counters in a bucket may overflow at their

         maximum value with no indication, a prudent manager will
         take into account the possibility of overflow in any of
         the associated counters.  It is important to consider the
         minimum time in which any counter could overflow on a
         particular media type and set the historyControlInterval
         object to a value less than this interval.  This is
         typically most important for the 'octets' counter in any
         media-specific table.  For example, on an Ethernet
         network, the etherHistoryOctets counter could overflow
         in about one hour at the Ethernet's maximum
         utilization.

         This object may not be modified if the associated
         historyControlStatus object is equal to valid(1)."
     DEFVAL { 1800 }
     ::= { rmonHistoryEntry 4 }

 rmonHistoryOwner OBJECT-TYPE
     SYNTAX     OwnerString
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The entity that configured this entry and is therefore
         using the resources assigned to it."
     ::= { rmonHistoryEntry 5 }

 rmonHistoryStatus OBJECT-TYPE
     SYNTAX     RmonStatus
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The status of this historyControl entry.

         Each instance of the media-specific table associated
         with this historyControlEntry will be deleted by the agent
         if this historyControlEntry is not equal to valid(1)."
     ::= { rmonHistoryEntry 6 }


 -- The Alarm Group

 -- Implementation of the Alarm group is optional. The Alarm Group
 -- requires the implementation of the Event group.
 -- Consult the MODULE-COMPLIANCE macro for the authoritative
 -- conformance information for this MIB.
 --
 -- The Alarm group periodically takes statistical samples from
 -- variables in the probe and compares them to thresholds that have
 -- been configured.  The alarm table stores configuration
 -- entries that each define a variable, polling period, and
 -- threshold parameters.  If a sample is found to cross the
 -- threshold values, an event is generated.  Only variables that
 -- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
 -- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
 -- this way.
 --

 -- This function has a hysteresis mechanism to limit the generation
 -- of events.  This mechanism generates one event as a threshold
 -- is crossed in the appropriate direction.  No more events are
 -- generated for that threshold until the opposite threshold is
 -- crossed.
 --
 -- In the case of a sampling a deltaValue, a probe may implement
 -- this mechanism with more precision if it takes a delta sample
 -- twice per period, each time comparing the sum of the latest two
 -- samples to the threshold.  This allows the detection of threshold
 -- crossings that span the sampling boundary.  Note that this does
 -- not require any special configuration of the threshold value.
 -- It is suggested that probes implement this more precise algorithm.

 rmonAlarmTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF RmonAlarmEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of alarm entries."
     ::= { rmonAlarm 1 }

 rmonAlarmEntry OBJECT-TYPE
     SYNTAX     RmonAlarmEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of parameters that set up a periodic checking
         for alarm conditions.  For example, an instance of the
         alarmValue object might be named alarmValue.8"
     INDEX { rmonAlarmIndex }
     ::= { rmonAlarmTable 1 }

 RmonAlarmEntry ::= SEQUENCE {
     rmonAlarmIndex                    Integer32,
     rmonAlarmInterval                 Integer32,
     rmonAlarmVariable                 OBJECT IDENTIFIER,
     rmonAlarmSampleType               INTEGER,
     rmonAlarmRisingThreshold          Integer32,
     rmonAlarmFallingThreshold         Integer32,
     rmonAlarmRisingEventIndex         Integer32,
     rmonAlarmFallingEventIndex        Integer32,
     rmonAlarmOwner                    OwnerString,
     rmonAlarmStatus                   RmonStatus
}

 rmonAlarmIndex OBJECT-TYPE
     SYNTAX     Integer32 (1..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "An index that uniquely identifies an entry in the
         alarm table.  Each such entry defines a
         diagnostic sample at a particular interval
         for an object on the device."
     ::= { rmonAlarmEntry 1 }

 rmonAlarmInterval OBJECT-TYPE
     SYNTAX     Integer32
     UNITS      "Seconds"
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The interval in seconds over which the data is
         sampled and compared with the rising and falling
         thresholds.  When setting this variable, care
         should be taken in the case of deltaValue
         sampling - the interval should be set short enough
         that the sampled variable is very unlikely to
         increase or decrease by more than 2^31 - 1 during
         a single sampling interval.

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 2 }

 rmonAlarmVariable OBJECT-TYPE
     SYNTAX     OBJECT IDENTIFIER
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The object identifier of the particular variable to be
         sampled.  Only variables that resolve to an ASN.1 primitive
         type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
         Gauge, or TimeTicks) may be sampled.

         Because SNMP access control is articulated entirely
         in terms of the contents of MIB views, no access
         control mechanism exists that can restrict the value of
         this object to identify only those objects that exist
         in a particular MIB view.  Because there is thus no
         acceptable means of restricting the read access that
         could be obtained through the alarm mechanism, the
         probe must only grant write access to this object in

         those views that have read access to all objects on
         the probe.

         During a set operation, if the supplied variable name is
         not available in the selected MIB view, a badValue error
         must be returned.  If at any time the variable name of
         an established alarmEntry is no longer available in the
         selected MIB view, the probe must change the status of
         this alarmEntry to invalid(4).

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 3 }

 rmonAlarmSampleType OBJECT-TYPE
     SYNTAX     INTEGER {
                  absoluteValue(1),
                  deltaValue(2)
                }
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The method of sampling the selected variable and
         calculating the value to be compared against the
         thresholds.  If the value of this object is
         absoluteValue(1), the value of the selected variable
         will be compared directly with the thresholds at the
         end of the sampling interval.  If the value of this
         object is deltaValue(2), the value of the selected
         variable at the last sample will be subtracted from
         the current value, and the difference compared with
         the thresholds.

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 4 }

 rmonAlarmRisingThreshold OBJECT-TYPE
     SYNTAX     Integer32
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "A threshold for the sampled statistic.  When the current
         sampled value is greater than or equal to this threshold,
         and the value at the last sampling interval was less than
         this threshold, a single event will be generated.
         A single event will also be generated if the first
         sample after this entry becomes valid is greater than or
         equal to this threshold and the associated
         alarmStartupAlarm is equal to risingAlarm(1) or
         risingOrFallingAlarm(3).

         After a rising event is generated, another such event

         will not be generated until the sampled value
         falls below this threshold and reaches the
         alarmFallingThreshold.

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 5 }

 rmonAlarmFallingThreshold OBJECT-TYPE
     SYNTAX     Integer32
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "A threshold for the sampled statistic.  When the current
         sampled value is less than or equal to this threshold,
         and the value at the last sampling interval was greater than
         this threshold, a single event will be generated.
         A single event will also be generated if the first
         sample after this entry becomes valid is less than or
         equal to this threshold and the associated
         alarmStartupAlarm is equal to fallingAlarm(2) or
         risingOrFallingAlarm(3).

         After a falling event is generated, another such event
         will not be generated until the sampled value
         rises above this threshold and reaches the
         alarmRisingThreshold.

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 6 }

 rmonAlarmRisingEventIndex OBJECT-TYPE
     SYNTAX     Integer32 (0..65535)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The index of the eventEntry that is
         used when a rising threshold is crossed.  The
         eventEntry identified by a particular value of
         this index is the same as identified by the same value
         of the eventIndex object.  If there is no
         corresponding entry in the eventTable, then
         no association exists.  In particular, if this value
         is zero, no associated event will be generated, as
         zero is not a valid event index.

         This object may not be modified if the associated

         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 7 }

 rmonAlarmFallingEventIndex OBJECT-TYPE
     SYNTAX     Integer32 (0..65535)
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The index of the eventEntry that is
         used when a falling threshold is crossed.  The
         eventEntry identified by a particular value of
         this index is the same as identified by the same value
         of the eventIndex object.  If there is no
         corresponding entry in the eventTable, then
         no association exists.  In particular, if this value
         is zero, no associated event will be generated, as
         zero is not a valid event index.

         This object may not be modified if the associated
         alarmStatus object is equal to valid(1)."
     ::= { rmonAlarmEntry 8 }

 rmonAlarmOwner OBJECT-TYPE
     SYNTAX     OwnerString
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The entity that configured this entry and is therefore
         using the resources assigned to it."
     ::= { rmonAlarmEntry 9 }

 rmonAlarmStatus OBJECT-TYPE
     SYNTAX     RmonStatus
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The status of this alarm entry."
     ::= { rmonAlarmEntry 10 }

 -- The Event Group

 -- Implementation of the Event group is optional.
 -- Consult the MODULE-COMPLIANCE macro for the authoritative
 -- conformance information for this MIB.
 --
 -- The Event group controls the generation and notification
 -- of events from this device.  Each entry in the eventTable
 -- describes the parameters of the event that can be triggered.
 -- Each event entry is fired by an associated condition located
 -- elsewhere in the MIB.  An event entry may also be associated
 -- with a function elsewhere in the MIB that will be executed
 -- when the event is generated.  For example, a channel may
 -- be turned on or off by the firing of an event.
 --
 -- Each eventEntry may optionally specify that a log entry
 -- be created on its behalf whenever the event occurs.
 -- Each entry may also specify that notification should
 -- occur by way of SNMP trap messages.  In this case, the
 -- community for the trap message is given in the associated
 -- eventCommunity object.  The enterprise and specific trap
 -- fields of the trap are determined by the condition that
 -- triggered the event.  Two traps are defined: risingAlarm and
 -- fallingAlarm.  If the eventTable is triggered by a condition
 -- specified elsewhere, the enterprise and specific trap fields
 -- must be specified for traps generated for that condition.

 rmonEventTable OBJECT-TYPE
     SYNTAX     SEQUENCE OF RmonEventEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A list of events to be generated."
     ::= { rmonEvent 1 }

 rmonEventEntry OBJECT-TYPE
     SYNTAX     RmonEventEntry
     MAX-ACCESS not-accessible
     STATUS     current
     DESCRIPTION
         "A set of parameters that describe an event to be generated
         when certain conditions are met.  As an example, an instance
         of the eventLastTimeSent object might be named
         eventLastTimeSent.6"
     INDEX { rmonEventIndex }
     ::= { rmonEventTable 1 }

 RmonEventEntry ::= SEQUENCE {
     rmonEventIndex          Integer32,
     rmonEventDescription    DisplayString,
     rmonEventType           INTEGER,
     rmonEventCommunity      OCTET STRING,
     rmonEventOwner          OwnerString,
     rmonEventStatus         RmonStatus
 }

 rmonEventIndex OBJECT-TYPE
     SYNTAX     Integer32 (1..65535)
     MAX-ACCESS read-only
     STATUS     current
     DESCRIPTION
         "An index that uniquely identifies an entry in the
         event table.  Each such entry defines one event that
         is to be generated when the appropriate conditions
         occur."
     ::= { rmonEventEntry 1 }

 rmonEventDescription OBJECT-TYPE
     SYNTAX     DisplayString (SIZE (0..127))
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "A comment describing this event entry."
     ::= { rmonEventEntry 2 }

 rmonEventType OBJECT-TYPE
     SYNTAX     INTEGER {
                  none(1),
                  log(2),
                  snmptrap(3),    -- send an SNMP trap
                  logandtrap(4)
                }
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The type of notification that the probe will make
         about this event.  In the case of log, an entry is
         made in the log table for each event.  In the case of
         snmp-trap, an SNMP trap is sent to one or more
         management stations."
     ::= { rmonEventEntry 3 }

 rmonEventCommunity OBJECT-TYPE
     SYNTAX     OCTET STRING (SIZE (0..127))
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "If an SNMP trap is to be sent, it will be sent to
         the SNMP community specified by this octet string."
     ::= { rmonEventEntry 4 }

 rmonEventOwner OBJECT-TYPE
     SYNTAX     OwnerString
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The entity that configured this entry and is therefore
         using the resources assigned to it.

         If this object contains a string starting with 'monitor'
         and has associated entries in the log table, all connected
         management stations should retrieve those log entries,
         as they may have significance to all management stations
         connected to this device"
     ::= { rmonEventEntry 5 }

 rmonEventStatus OBJECT-TYPE
     SYNTAX     RmonStatus
     MAX-ACCESS read-create
     STATUS     current
     DESCRIPTION
         "The status of this event entry.

         If this object is not equal to valid(1), all associated
         log entries shall be deleted by the agent."
     ::= { rmonEventEntry 6 }
                  
          
		-- *****************************************************************
		--
		--  Enterprise Trap group 
		--
		-- *****************************************************************

		bridgeGeneral TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_BRG_GEN_TRAP_VAL."
		        ::= 1

		bridgeError TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_BRG_ERR_TRAP_VAL."
		        ::= 2

		stpNewRoot TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_NEW_ROOT_TRAP_VAL."
		        ::= 3

		topologyChange TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_TOPOLOGY_CHG_TRAP_VAL."
		        ::= 4

		protocolMigration TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_PROTOCOL_MIGRATION_TRAP_VAL."
		        ::= 5

		iivalidBpduRxd TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_INVALID_BPDU_RXD_TRAP_VAL."
		        ::= 6

		newPortRole TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "AST_NEW_PORTROLE_TRAP_VAL."
		        ::= 7
  
  


		firmwareUpgradeSuccess TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "SNMP_FIRMUPGRADE_SUCC."
		        ::= 8

		firmwareUpgradeFailure TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "SNMP_FIRMUPGRADE_FAIL."
		        ::= 9

		firmwareIllegalFile TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "SNMP_FIRMUPGRADE_FAIL2."
		        ::= 10
		        
		firmwareTransferError TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "SNMP_FIRMUPGRADE_FAIL1."
		        ::= 11

		firmwareChecksumError TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "SNMP_FIRMUPGRADE_FAIL3."
		        ::= 12

                stormOccurred TRAP-TYPE
                        ENTERPRISE des-1210-28ax
                        DESCRIPTION
                           "Storm Occurred."
                        ::= 20

                stormCleared TRAP-TYPE
                        ENTERPRISE des-1210-28ax
                        DESCRIPTION
                           "Storm Cleared."
                        ::= 21

		macNotification TRAP-TYPE
			ENTERPRISE des-1210-28ax
		        DESCRIPTION
		           "Learning Mac Notification."
		        ::= 22  
		        

        impbMacBlocked TRAP-TYPE
                ENTERPRISE des-1210-28ax
                DESCRIPTION
                   "Storm Occurred."
                ::= 23

END
