-- ****************************************************************
-- CISCO-SWITCH-HARDWARE-CAPACITY-MIB
--   
-- January 2008, Edward Pham, Guichuan Tang, Jayakumar Kadirvelu
--   
-- Copyright (c) 2008-2014, 2016 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************

CISCO-SWITCH-HARDWARE-CAPACITY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Gauge32,
    Integer32,
    Unsigned32,
    Counter32,
    Counter64
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    DateAndTime,
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    entPhysicalIndex
        FROM ENTITY-MIB
    CounterBasedGauge64
        FROM HCNUM-TC
    InterfaceIndexOrZero,
    ifIndex
        FROM IF-MIB
    InetAddressType
        FROM INET-ADDRESS-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    CiscoInterfaceIndexList
        FROM CISCO-TC
    Percent
        FROM CISCO-QOS-PIB-MIB
    ciscoMgmt
        FROM CISCO-SMI;


ciscoSwitchHardwareCapacityMIB MODULE-IDENTITY
    LAST-UPDATED    "201608170000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA 95134
            USA

            Tel: +1 800 553-NETS

            E-mail: cs-lan-switch-snmp@cisco.com"
    DESCRIPTION
        "This MIB module defines the managed objects for hardware
        capacity of Cisco switching devices. The hardware
        capacity information covers the following but not limited
        to features: forwarding, rate-limiter ... 

        The following terms are used throughout the MIB:

        CAM: Content Addressable Memory.
        TCAM: Ternary Content Addressable Memory.
        FIB: Forwarding Information Base.
        VPN: Virtual Private Network.
        QoS: Quality of Service.
        CPU rate-limiter: Mechanism to rate-limit or restrict
        undesired traffic to the CPU.
        MPLS: Multiprotocol Label Switching."
    REVISION        "201608170000Z"
    DESCRIPTION
        "Added the following OBJECT-GROUP
        - cshcForwardingResourceGroup"
    REVISION        "201409160000Z"
    DESCRIPTION
        "Added the following enumerations for object
        cshcProtocolFibTcamProtocol
        - allProtocols(14)

        Updated the description of cshcProtocolFibTcamTotal
        and cshcProtocolFibTcamLogicalTotal."
    REVISION        "201401240000Z"
    DESCRIPTION
        "Added following OBJECT-GROUP
        - cshcProtocolFibTcamWidthTypeGroup

        Added the following enumerations for object
        cshcProtocolFibTcamProtocol
        - mplsVpn(11)
        - fcMpls(12)
        - ipv6LocalLink(13)

        Added new compliance
        - ciscoSwitchHardwareCapacityMIBCompliance3"
    REVISION        "201305080000Z"
    DESCRIPTION
        "Added following OBJECT-GROUP
        - cshcNetflowFlowResourceUsageGroup
        - cshcMacUsageExtGroup
        - cshcProtocolFibTcamUsageExtGroup
        - cshcAdjacencyResourceUsageGroup 
        - cshcQosResourceUsageGroup
        - cshcModTopDropIfIndexListGroup
        - cshcMetResourceUsageGroup

        Added the following enumerations for          
        object cshcProtocolFibTcamProtocol
        - l2VpnPeer(7)
        - l2VpnIpv4Multicast(8)
        - l2VpnIpv6Multicast(9)
        Added new compliance
        - ciscoSwitchHardwareCapacityMIBCompliance2"
    REVISION        "201011220000Z"
    DESCRIPTION
        "Add the following new enumerations to
        cshcCPURateLimiterNetworkLayer:
           layer2Input(3) and layer2Output(4).         

        Add cshcFibTcamUsageExtGroup."
    REVISION        "200807020000Z"
    DESCRIPTION
        "Initial revision of this MIB module."
    ::= { ciscoMgmt 663 }


-- MIB object definitions

ciscoSwitchHardwareCapacityMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIB 0 }

ciscoSwitchHardwareCapacityMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIB 1 }

ciscoSwitchHardwareCapacityMIBConformance  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIB 2 }

cshcForwarding  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 1 }

cshcInterface  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 2 }

cshcCPURateLimiterResources  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 3 }

cshcIcamResources  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 4 }

cshcNetflowFlowMaskResources  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 5 }

cshcNetflowResourceUsage  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 6 }

cshcQosResourceUsage  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBObjects 7 }


-- Textual Conventions

CshcInternalChannelType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "An enumerated value indicating the type of an internal
        channel.

        eobc - ethernet out-of-band channel.

        ibc - in-band channel."
    SYNTAX          INTEGER  {
                        eobc(1),
                        ibc(2)
                    }
-- Layer 2 Forwarding group

cshcL2Forwarding  OBJECT IDENTIFIER
    ::= { cshcForwarding 1 }

-- The cshcMacUsageTable

cshcMacUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcMacUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains MAC table capacity for each
        switching engine, as specified by entPhysicalIndex in
        ENTITY-MIB, capable of providing this information."
    ::= { cshcL2Forwarding 1 }

cshcMacUsageEntry OBJECT-TYPE
    SYNTAX          CshcMacUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for MAC
        table hardware capacity on a switching engine."
    INDEX           { entPhysicalIndex } 
    ::= { cshcMacUsageTable 1 }

CshcMacUsageEntry ::= SEQUENCE {
        cshcMacCollisions Counter32,
        cshcMacUsed       Unsigned32,
        cshcMacTotal      Unsigned32,
        cshcMacMcast      Unsigned32,
        cshcMacUcast      Unsigned32,
        cshcMacLines      Unsigned32,
        cshcMacLinesFull  Unsigned32
}

cshcMacCollisions OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of Ethernet frames
        whose source MAC address the switching engine failed to
        learn while constructing its MAC table." 
    ::= { cshcMacUsageEntry 1 }

cshcMacUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of MAC table entries
        that are currently in use for this switching engine." 
    ::= { cshcMacUsageEntry 2 }

cshcMacTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of MAC table entries
        available for this switching engine." 
    ::= { cshcMacUsageEntry 3 }

cshcMacMcast OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of multicast MAC
        table entries on this switching engine." 
    ::= { cshcMacUsageEntry 4 }

cshcMacUcast OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of unicast MAC
        table entries on this switching engine." 
    ::= { cshcMacUsageEntry 5 }

cshcMacLines OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of MAC table lines
        on this switching engine. The MAC table is organized as  
        multiple MAC entries per line." 
    ::= { cshcMacUsageEntry 6 }

cshcMacLinesFull OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of MAC table lines
        full on this switching engine.   A line full means all
        the MAC entries on the line are occupied." 
    ::= { cshcMacUsageEntry 7 }
 

-- The cshcVpnCamUsageTable

cshcVpnCamUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcVpnCamUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains VPN CAM capacity for each
        entity, as specified by entPhysicalIndex in
        ENTITY-MIB, capable of providing this information."
    ::= { cshcL2Forwarding 2 }

cshcVpnCamUsageEntry OBJECT-TYPE
    SYNTAX          CshcVpnCamUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for VPN CAM
        hardware capacity on an entity."
    INDEX           { entPhysicalIndex } 
    ::= { cshcVpnCamUsageTable 1 }

CshcVpnCamUsageEntry ::= SEQUENCE {
        cshcVpnCamUsed  Unsigned32,
        cshcVpnCamTotal Unsigned32
}

cshcVpnCamUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of VPN CAM entries
        that are currently in use." 
    ::= { cshcVpnCamUsageEntry 1 }

cshcVpnCamTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of VPN
        CAM entries." 
    ::= { cshcVpnCamUsageEntry 2 }
 

-- Layer3 Forwarding

cshcL3Forwarding  OBJECT IDENTIFIER
    ::= { cshcForwarding 2 }

-- The cshcFibTcamUsageTable

cshcFibTcamUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcFibTcamUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains FIB TCAM capacity for each
        entity, as specified by entPhysicalIndex in 
        ENTITY-MIB, capable of providing this information."
    ::= { cshcL3Forwarding 1 }

cshcFibTcamUsageEntry OBJECT-TYPE
    SYNTAX          CshcFibTcamUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for FIB TCAM
        hardware capacity on an entity."
    INDEX           { entPhysicalIndex } 
    ::= { cshcFibTcamUsageTable 1 }

CshcFibTcamUsageEntry ::= SEQUENCE {
        cshc72bitsFibTcamUsed   Unsigned32,
        cshc72bitsFibTcamTotal  Unsigned32,
        cshc144bitsFibTcamUsed  Unsigned32,
        cshc144bitsFibTcamTotal Unsigned32,
        cshc288bitsFibTcamUsed  Unsigned32,
        cshc288bitsFibTcamTotal Unsigned32
}

cshc72bitsFibTcamUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of 72 bits FIB TCAM
        entries that are currently in use." 
    ::= { cshcFibTcamUsageEntry 1 }

cshc72bitsFibTcamTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of 72 bits FIB TCAM
        entries available." 
    ::= { cshcFibTcamUsageEntry 2 }

cshc144bitsFibTcamUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of 144 bits FIB TCAM
        entries that are currently in use." 
    ::= { cshcFibTcamUsageEntry 3 }

cshc144bitsFibTcamTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of 144 bits FIB TCAM
        entries available." 
    ::= { cshcFibTcamUsageEntry 4 }

cshc288bitsFibTcamUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of 288 bits FIB TCAM
        entries that are currently in use." 
    ::= { cshcFibTcamUsageEntry 5 }

cshc288bitsFibTcamTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of 288 bits FIB TCAM
        entries available." 
    ::= { cshcFibTcamUsageEntry 6 }
 

-- CshcProtocolFibTcamUsageTable

cshcProtocolFibTcamUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcProtocolFibTcamUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains FIB TCAM usage per specified
        Layer 3 protocol on an entity capable of providing
        this information."
    ::= { cshcL3Forwarding 2 }

cshcProtocolFibTcamUsageEntry OBJECT-TYPE
    SYNTAX          CshcProtocolFibTcamUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for FIB TCAM
        usage for the specific Layer 3 protocol on an entity as
        specified by the entPhysicalIndex in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcProtocolFibTcamProtocol
                    } 
    ::= { cshcProtocolFibTcamUsageTable 1 }

CshcProtocolFibTcamUsageEntry ::= SEQUENCE {
        cshcProtocolFibTcamProtocol     INTEGER,
        cshcProtocolFibTcamUsed         Unsigned32,
        cshcProtocolFibTcamTotal        Unsigned32,
        cshcProtocolFibTcamLogicalUsed  Unsigned32,
        cshcProtocolFibTcamLogicalTotal Unsigned32,
        cshcProtocolFibTcamWidthType    INTEGER
}

cshcProtocolFibTcamProtocol OBJECT-TYPE
    SYNTAX          INTEGER  {
                        ipv4(1),
                        mpls(2),
                        eom(3),
                        ipv6(4),
                        ipv4Multicast(5),
                        ipv6Multicast(6),
                        l2VpnPeer(7),
                        l2VpnIpv4Multicast(8),
                        l2VpnIpv6Multicast(9),
                        fcoe(10),
                        mplsVpn(11),
                        fcMpls(12),
                        ipv6LocalLink(13),
                        allProtocols(14)
                    }
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the Layer 3 protocol utilizing FIB TCAM
        resource.

        'ipv4'               - indicates Internet Protocol version 4.
        'mpls'               - indicates Multiprotocol Label Switching.
        'eom'                - indicates Ethernet over MPLS.
        'ipv6'               - indicates Internet Protocol version 6.
        'ipv4Multicast'      - indicates Internet Protocol version 4
                               for multicast traffic.
        'ipv6Multicast'      - indicates Internet Protocol version 6
                               for multicast traffic.
        'l2VpnPeer'          - indicates Layer 2 VPN Peer traffic.
        'l2VpnIpv4Multicast' - indicates Internet Protocol version
                               4 for multicast traffic on Layer 2 VPN.
        'l2VpnIpv6Multicast' - indicates Internet Protocol version 6 
                               for multicast traffic on Layer 2 VPN.
        'fcoe'               - indicates Fibre Channel over Ethernet.
        'mplsVpn'            - indicates MPLS Layer 3 VPN aggregate
                               labels.
        'fcMpls'             - indicates Fibre Channel over MPLS
                               tunnels.
        'ipv6LocalLink'      - indicates Internet Protocol version 6 
                               Local Link.
        'allProtocols'       - indicates all protocols within the
                               entPhysicalIndex." 
    ::= { cshcProtocolFibTcamUsageEntry 1 }

cshcProtocolFibTcamUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of FIB TCAM entries
        that are currently in use for the protocol denoted by
        cshcProtocolFibTcamProtocol." 
    ::= { cshcProtocolFibTcamUsageEntry 2 }

cshcProtocolFibTcamTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of FIB TCAM entries
        are currently allocated for the protocol denoted by
        cshcProtocolFibTcamProtocol.

        A value of zero indicates that the total number of FIB TCAM
        for the protocol denoted by cshcProtocolFibTcamProtocol
        is not available." 
    ::= { cshcProtocolFibTcamUsageEntry 3 }

cshcProtocolFibTcamLogicalUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of logical FIB TCAM entries
        that are currently in use for the protocol denoted by
        cshcProtocolFibTcamProtocol." 
    ::= { cshcProtocolFibTcamUsageEntry 4 }

cshcProtocolFibTcamLogicalTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of logical FIB TCAM
        entries that are currently allocated for the protocol denoted by
        cshcProtocolFibTcamProtocol.

        A value of zero indicates that the total number of logical FIB
        TCAM for the protocol denoted by cshcProtocolFibTcamProtocol
        is not available." 
    ::= { cshcProtocolFibTcamUsageEntry 5 }

cshcProtocolFibTcamWidthType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        singleWidth(1),
                        doubleWidth(2),
                        quadWidth(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the entry width type for the protocol
        denoted by cshcProtocolFibTcamProtocol. 

        'singleWidth'        - indicates each logical entry is using one
                               physical entry.
        'doubleWidth'        - indicates each logical entry is using two
                               physical entries.
        'quadWidth'          - indicates each logical entry is using 
                               four physical entries." 
    ::= { cshcProtocolFibTcamUsageEntry 6 }
 

-- The cshcAdjacencyUsageTable

cshcAdjacencyUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcAdjacencyUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains adjacency capacity for each
        entity capable of providing this information."
    ::= { cshcL3Forwarding 3 }

cshcAdjacencyUsageEntry OBJECT-TYPE
    SYNTAX          CshcAdjacencyUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for adjacency
        hardware capacity on an entity, as specified by
        entPhysicalIndex in ENTITY-MIB."
    INDEX           { entPhysicalIndex } 
    ::= { cshcAdjacencyUsageTable 1 }

CshcAdjacencyUsageEntry ::= SEQUENCE {
        cshcAdjacencyUsed  Unsigned32,
        cshcAdjacencyTotal Unsigned32
}

cshcAdjacencyUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of adjacency entries
        that are currently in use." 
    ::= { cshcAdjacencyUsageEntry 1 }

cshcAdjacencyTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of adjacency
        entries available." 
    ::= { cshcAdjacencyUsageEntry 2 }
 

-- The cshcForwardingLoadTable

cshcForwardingLoadTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcForwardingLoadEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains Layer 3 forwarding load information
        for each switching engine capable of providing this
        information."
    ::= { cshcL3Forwarding 4 }

cshcForwardingLoadEntry OBJECT-TYPE
    SYNTAX          CshcForwardingLoadEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information of Layer 3
        forwarding load on a switching engine, as specified
        by entPhysicalIndex in ENTITY-MIB."
    INDEX           { entPhysicalIndex } 
    ::= { cshcForwardingLoadTable 1 }

CshcForwardingLoadEntry ::= SEQUENCE {
        cshcForwardingLoadPktRate     CounterBasedGauge64,
        cshcForwardingLoadPktPeakRate CounterBasedGauge64,
        cshcForwardingLoadPktPeakTime DateAndTime
}

cshcForwardingLoadPktRate OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "pps"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the forwarding rate of Layer 3
        packets." 
    ::= { cshcForwardingLoadEntry 1 }

cshcForwardingLoadPktPeakRate OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "pps"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the peak forwarding rate of Layer 3
        packets." 
    ::= { cshcForwardingLoadEntry 2 }

cshcForwardingLoadPktPeakTime OBJECT-TYPE
    SYNTAX          DateAndTime
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object describes the time when the peak forwarding rate
        of Layer 3 packets denoted by cshcForwardingLoadPktPeakRate
        occurs.

        This object will contain 0-1-1,00:00:00.0 if the peak time
        information is not available." 
    ::= { cshcForwardingLoadEntry 3 }
 

-- The cshcAdjacencyResourceUsageTable

cshcAdjacencyResourceUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcAdjacencyResourceUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains adjacency capacity per resource type
        and its usage for each entity capable of providing this  
        information."
    ::= { cshcL3Forwarding 5 }

cshcAdjacencyResourceUsageEntry OBJECT-TYPE
    SYNTAX          CshcAdjacencyResourceUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains the management information for a particular
        adjacency resource and switch engine, as specified by
        entPhysicalIndex in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcAdjacencyResourceIndex
                    } 
    ::= { cshcAdjacencyResourceUsageTable 1 }

CshcAdjacencyResourceUsageEntry ::= SEQUENCE {
        cshcAdjacencyResourceIndex Unsigned32,
        cshcAdjacencyResourceDescr SnmpAdminString,
        cshcAdjacencyResourceUsed  Unsigned32,
        cshcAdjacencyResourceTotal Unsigned32
}

cshcAdjacencyResourceIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates a unique value that identifies an
        adjacency resource." 
    ::= { cshcAdjacencyResourceUsageEntry 1 }

cshcAdjacencyResourceDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates a description of the adjacency
        resource." 
    ::= { cshcAdjacencyResourceUsageEntry 2 }

cshcAdjacencyResourceUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of adjacency entries
        that are currently in use." 
    ::= { cshcAdjacencyResourceUsageEntry 3 }

cshcAdjacencyResourceTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of adjacency
        entries available." 
    ::= { cshcAdjacencyResourceUsageEntry 4 }
 

-- The cshcMetResourceUsageTable

cshcMetResourceUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcMetResourceUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding Multicast Expansion
        Table (MET) resource usage and utilization for a switching
        engine capable of providing this information."
    ::= { cshcL3Forwarding 6 }

cshcMetResourceUsageEntry OBJECT-TYPE
    SYNTAX          CshcMetResourceUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information of the usage and
        utilization for a particular MET resource and
        switching engine, as specified by entPhysicalIndex
        in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcMetResourceIndex
                    } 
    ::= { cshcMetResourceUsageTable 1 }

CshcMetResourceUsageEntry ::= SEQUENCE {
        cshcMetResourceIndex    Unsigned32,
        cshcMetResourceDescr    SnmpAdminString,
        cshcMetResourceUsed     Gauge32,
        cshcMetResourceTotal    Gauge32,
        cshcMetResourceMcastGrp Integer32
}

cshcMetResourceIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An arbitrary positive integer value that uniquely identifies a
        Met resource." 
    ::= { cshcMetResourceUsageEntry 1 }

cshcMetResourceDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates a description of the MET resource." 
    ::= { cshcMetResourceUsageEntry 2 }

cshcMetResourceUsed OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of MET entries used by
        this MET resource." 
    ::= { cshcMetResourceUsageEntry 3 }

cshcMetResourceTotal OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of MET entries available
        for this MET resource." 
    ::= { cshcMetResourceUsageEntry 4 }

cshcMetResourceMcastGrp OBJECT-TYPE
    SYNTAX          Integer32 (-1..2147483647)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of the multicast group for
        this MET resource.

        A value of -1 indicates that this object is not applicable
        on this MET feature." 
    ::= { cshcMetResourceUsageEntry 5 }
 
-- The cshcForwardingResourceTable

cshcForwardingResourceTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcForwardingResourceEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding forwarding 
        resource for each entity capable of providing this
        information."
    ::= { cshcL3Forwarding 7 }

cshcForwardingResourceEntry OBJECT-TYPE
    SYNTAX          CshcForwardingResourceEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information for a particular forwarding
        table resource on an entity, as specified by entPhysicalIndex
        in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcForwardingResourceIndex
                    } 
    ::= { cshcForwardingResourceTable 1 }

CshcForwardingResourceEntry ::= SEQUENCE {
        cshcForwardingResourceIndex    Unsigned32,
        cshcForwardingResourceDescr    SnmpAdminString,
        cshcForwardingResourceValue    Unsigned32
}

cshcForwardingResourceIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..2147483647)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An arbitrary positive integer value that uniquely identifies a
        forwarding table resource." 
    ::= { cshcForwardingResourceEntry 1 }

cshcForwardingResourceDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the description of a forwarding
        table resource." 
    ::= { cshcForwardingResourceEntry 2 }

cshcForwardingResourceValue OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the value of a forwarding table
        resource." 
    ::= { cshcForwardingResourceEntry 3 }

-- Interface group

cshcModuleInterfaceDropsTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcModuleInterfaceDropsEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains interface drops information on each
        module capable of providing this information."
    ::= { cshcInterface 1 }

cshcModuleInterfaceDropsEntry OBJECT-TYPE
    SYNTAX          CshcModuleInterfaceDropsEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for dropped traffic
        on a specific module, identified by the entPhysicalIndex 
        in ENTITY-MIB, and capable of providing this information."
    INDEX           { entPhysicalIndex } 
    ::= { cshcModuleInterfaceDropsTable 1 }

CshcModuleInterfaceDropsEntry ::= SEQUENCE {
        cshcModTxTotalDroppedPackets Counter64,
        cshcModRxTotalDroppedPackets Counter64,
        cshcModTxTopDropPort         InterfaceIndexOrZero,
        cshcModRxTopDropPort         InterfaceIndexOrZero,
        cshcModTxTopDropIfIndexList  CiscoInterfaceIndexList,
        cshcModRxTopDropIfIndexList  CiscoInterfaceIndexList
}

cshcModTxTotalDroppedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total dropped outbound packets
        on all physical interfaces of this module." 
    ::= { cshcModuleInterfaceDropsEntry 1 }

cshcModRxTotalDroppedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total dropped inbound packets
        on all physical interfaces of this module." 
    ::= { cshcModuleInterfaceDropsEntry 2 }

cshcModTxTopDropPort OBJECT-TYPE
    SYNTAX          InterfaceIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ifIndex value of the interface
        that has the largest number of total dropped outbound packets
        among all the physical interfaces on this module.

        If there were no dropped outbound packets on any  
        physical interfaces of this module, this object has 
        the value 0.

        If there are multiple physical interfaces of this module having
        the same largest number of total dropped outbound packets, the  
        ifIndex of the first such interfaces will be assigned to this
        object." 
    ::= { cshcModuleInterfaceDropsEntry 3 }

cshcModRxTopDropPort OBJECT-TYPE
    SYNTAX          InterfaceIndexOrZero
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ifIndex value of the interface that
        has the largest number of total dropped inbound packets among
        all the physical interfaces of this module.

        If there were no dropped inbound packets on any physical
        interfaces of this module, this object has the value 0.

        If there are multiple physical interfaces of this module having
        the same largest number of total dropped inbound packets, the  
        ifIndex of the first such interfaces will be assigned to this
        object." 
    ::= { cshcModuleInterfaceDropsEntry 4 }

cshcModTxTopDropIfIndexList OBJECT-TYPE
    SYNTAX          CiscoInterfaceIndexList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ifIndex values of the list of
        interfaces that have the largest number of total dropped
        outbound packets among all the physical interfaces of this
        module." 
    ::= { cshcModuleInterfaceDropsEntry 5 }

cshcModRxTopDropIfIndexList OBJECT-TYPE
    SYNTAX          CiscoInterfaceIndexList
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ifIndex values of the list of
        interfaces that have the largest number of total dropped
        inbound packets among all the physical interfaces of this
        module." 
    ::= { cshcModuleInterfaceDropsEntry 6 }
 


cshcInterfaceBufferTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcInterfaceBufferEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains buffer capacity information for each
        physical interface capable of providing this information."
    ::= { cshcInterface 2 }

cshcInterfaceBufferEntry OBJECT-TYPE
    SYNTAX          CshcInterfaceBufferEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains buffer capacity information for a
        specific physical interface capable of providing this 
        information."
    INDEX           { ifIndex } 
    ::= { cshcInterfaceBufferTable 1 }

CshcInterfaceBufferEntry ::= SEQUENCE {
        cshcInterfaceTransmitBufferSize Unsigned32,
        cshcInterfaceReceiveBufferSize  Unsigned32
}

cshcInterfaceTransmitBufferSize OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The aggregate buffer size of all the transmit queues on this
        interface." 
    ::= { cshcInterfaceBufferEntry 1 }

cshcInterfaceReceiveBufferSize OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "bytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The aggregate buffer size of all the receive queues on this
        interface." 
    ::= { cshcInterfaceBufferEntry 2 }
 


cshcInternalChannelTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcInternalChannelEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information for each internal channel
        interface on each physical entity, such as a module, 
        capable of providing this information."
    ::= { cshcInterface 3 }

cshcInternalChannelEntry OBJECT-TYPE
    SYNTAX          CshcInternalChannelEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for an internal
        channel interface of a specific type on a specific physical
        entity, such as a module, identified by the entPhysicalIndex
        in ENTITY-MIB, and capable of providing this information."
    INDEX           {
                        entPhysicalIndex,
                        cshcIntlChnlType
                    } 
    ::= { cshcInternalChannelTable 1 }

CshcInternalChannelEntry ::= SEQUENCE {
        cshcIntlChnlType             CshcInternalChannelType,
        cshcIntlChnlRxPacketRate     CounterBasedGauge64,
        cshcIntlChnlRxTotalPackets   Counter64,
        cshcIntlChnlRxDroppedPackets Counter64,
        cshcIntlChnlTxPacketRate     CounterBasedGauge64,
        cshcIntlChnlTxTotalPackets   Counter64,
        cshcIntlChnlTxDroppedPackets Counter64
}

cshcIntlChnlType OBJECT-TYPE
    SYNTAX          CshcInternalChannelType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "The type of this internal channel." 
    ::= { cshcInternalChannelEntry 1 }

cshcIntlChnlRxPacketRate OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "packets per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Five minute exponentially-decayed moving
        average of inbound packet rate for this
        channel." 
    ::= { cshcInternalChannelEntry 2 }

cshcIntlChnlRxTotalPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The total number of the inbound packets accounted for
        this channel." 
    ::= { cshcInternalChannelEntry 3 }

cshcIntlChnlRxDroppedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of dropped inbound packets for this channel." 
    ::= { cshcInternalChannelEntry 4 }

cshcIntlChnlTxPacketRate OBJECT-TYPE
    SYNTAX          CounterBasedGauge64
    UNITS           "packets per second"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "Five minute exponentially-decayed moving
        average of outbound packet rate for this
        channel." 
    ::= { cshcInternalChannelEntry 5 }

cshcIntlChnlTxTotalPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The total number of the outbound packets accounted for
        this channel." 
    ::= { cshcInternalChannelEntry 6 }

cshcIntlChnlTxDroppedPackets OBJECT-TYPE
    SYNTAX          Counter64
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "The number of dropped outbound packets for this channel." 
    ::= { cshcInternalChannelEntry 7 }
 

-- Rate Limit Resources group
--   

--   
-- The cshcCPURateLimiterResourcesTable

cshcCPURateLimiterResourcesTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcCPURateLimiterResourcesEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding
        CPU rate limiters resources."
    ::= { cshcCPURateLimiterResources 1 }

cshcCPURateLimiterResourcesEntry OBJECT-TYPE
    SYNTAX          CshcCPURateLimiterResourcesEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information of CPU rate
        limiter resources for a managed network layer."
    INDEX           { cshcCPURateLimiterNetworkLayer } 
    ::= { cshcCPURateLimiterResourcesTable 1 }

CshcCPURateLimiterResourcesEntry ::= SEQUENCE {
        cshcCPURateLimiterNetworkLayer INTEGER,
        cshcCPURateLimiterTotal        Unsigned32,
        cshcCPURateLimiterUsed         Unsigned32,
        cshcCPURateLimiterReserved     Unsigned32
}

cshcCPURateLimiterNetworkLayer OBJECT-TYPE
    SYNTAX          INTEGER  {
                        layer2(1),
                        layer3(2),
                        layer2Input(3),
                        layer2Output(4)
                    }
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the network layer for which
        the CPU rate limiters are applied.

        'layer2'       - Layer 2.
        'layer3'       - Layer 3.
        'layer2Input'  - Ingress Layer 2.
                         Applicable for devices which support
                         CPU rate limiters on the Ingress Layer 2
                         traffic.
        'layer2Output' - Egress Layer 2.
                         Applicable for devices which support
                         CPU rate limiters on the Egress Layer 2
                         traffic." 
    ::= { cshcCPURateLimiterResourcesEntry 1 }

cshcCPURateLimiterTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of CPU rate
        limiters avaiable." 
    ::= { cshcCPURateLimiterResourcesEntry 2 }

cshcCPURateLimiterUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of CPU rate limiters
        that is currently in use." 
    ::= { cshcCPURateLimiterResourcesEntry 3 }

cshcCPURateLimiterReserved OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of CPU rate limiters
        which is reserved by the switching device." 
    ::= { cshcCPURateLimiterResourcesEntry 4 }
 

-- ICAM Resources group
--   

--   
-- The cshcIcamUtilizationTable

cshcIcamUtilizationTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcIcamUtilizationEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding ICAM (Internal
        Content Addressable Memory) Resource usage and utilization
        for a switching engine capable of providing this
        information."
    ::= { cshcIcamResources 1 }

cshcIcamUtilizationEntry OBJECT-TYPE
    SYNTAX          CshcIcamUtilizationEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information of ICAM
        usage and utilization for a switching engine, as specified
        as specified by entPhysicalIndex in ENTITY-MIB."
    INDEX           { entPhysicalIndex } 
    ::= { cshcIcamUtilizationTable 1 }

CshcIcamUtilizationEntry ::= SEQUENCE {
        cshcIcamCreated     Unsigned32,
        cshcIcamFailed      Unsigned32,
        cshcIcamUtilization Percent
}

cshcIcamCreated OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of ICAM
        entries created." 
    ::= { cshcIcamUtilizationEntry 1 }

cshcIcamFailed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of ICAM entries
        which failed to be created." 
    ::= { cshcIcamUtilizationEntry 2 }

cshcIcamUtilization OBJECT-TYPE
    SYNTAX          Percent
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the ICAM utlization in percentage
        in this switching engine." 
    ::= { cshcIcamUtilizationEntry 3 }
 

-- Flow Mask  Resources group
--   

--   
-- The cshcNetflowFlowMaskTable

cshcNetflowFlowMaskTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcNetflowFlowMaskEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding Netflow flow mask
        features supported."
    ::= { cshcNetflowFlowMaskResources 1 }

cshcNetflowFlowMaskEntry OBJECT-TYPE
    SYNTAX          CshcNetflowFlowMaskEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains supported feature information of
        a Netflow flow mask supported by the device."
    INDEX           {
                        cshcNetflowFlowMaskAddrType,
                        cshcNetflowFlowMaskIndex
                    } 
    ::= { cshcNetflowFlowMaskTable 1 }

CshcNetflowFlowMaskEntry ::= SEQUENCE {
        cshcNetflowFlowMaskAddrType InetAddressType,
        cshcNetflowFlowMaskIndex    Unsigned32,
        cshcNetflowFlowMaskType     INTEGER,
        cshcNetflowFlowMaskFeature  BITS
}

cshcNetflowFlowMaskAddrType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates Internet address type for this
        flow mask." 
    ::= { cshcNetflowFlowMaskEntry 1 }

cshcNetflowFlowMaskIndex OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the unique flow mask number
        for a specific Internet address type." 
    ::= { cshcNetflowFlowMaskEntry 2 }

cshcNetflowFlowMaskType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        null(1),
                        srcOnly(2),
                        destOnly(3),
                        srcDest(4),
                        interfaceSrcDest(5),
                        fullFlow(6),
                        interfaceFullFlow(7),
                        interfaceFullFlowOrFullFlow(8),
                        atleastInterfaceSrcDest(9),
                        atleastFullFlow(10),
                        atleastInterfaceFullFlow(11),
                        atleastSrc(12),
                        atleastDst(13),
                        atleastSrcDst(14),
                        shortest(15),
                        lessThanFullFlow(16),
                        exceptFullFlow(17),
                        exceptInterfaceFullFlow(18),
                        interfaceDest(19),
                        atleastInterfaceDest(20),
                        interfaceSrc(21),
                        atleastInterfaceSrc(22),
                        srcOnlyCR(23),
                        dstOnlyCR(24),
                        fullFlowCR(25),
                        interfaceFullFlowCR(26),
                        max(27),
                        conflict(28),
                        err(29),
                        unused(30),
                        fullFlow1(31),
                        fullFlow2(32),
                        fullFlow3(33),
                        vlanFullFlow1(34),
                        vlanFullFlow2(35),
                        vlanFullFlow3(36),
                        reserved(37)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the type of flow mask." 
    ::= { cshcNetflowFlowMaskEntry 3 }

cshcNetflowFlowMaskFeature OBJECT-TYPE
    SYNTAX          BITS {
                        null(0),
                        ipAcgIngress(1),
                        ipAcgEgress(2),
                        natIngress(3),
                        natEngress(4),
                        natInside(5),
                        pbr(6),
                        cryptoIngress(7),
                        cryptoEgress(8),
                        qos(9),
                        idsIngress(10),
                        tcpIntrcptEgress(11),
                        guardian(12),
                        ipv6AcgIngress(13),
                        ipv6AcgEgress(14),
                        mcastAcgIngress(15),
                        mcastAcgEgress(16),
                        mcastStub(17),
                        mcastUrd(18),
                        ipDsIngress(19),
                        ipDsEgress(20),
                        ipVaclIngress(21),
                        ipVaclEgress(22),
                        macVaclIngress(23),
                        macVaclEgress(24),
                        inspIngress(25),
                        inspEgress(26),
                        authProxy(27),
                        rpf(28),
                        wccpIngress(29),
                        wccpEgress(30),
                        inspDummyIngress(31),
                        inspDummyEgress(32),
                        nbarIngress(33),
                        nbarEgress(34),
                        ipv6Rpf(35),
                        ipv6GlobalDefault(36),
                        dai(37),
                        ipPaclIngress(38),
                        macPaclIngress(39),
                        mplsIcmpBridge(40),
                        ipSlb(41),
                        ipv4Default(42),
                        ipv6Default(43),
                        mplsDefault(44),
                        erSpanTermination(45),
                        ipv6Mcast(46),
                        ipDsL3Ingress(47),
                        ipDsL3Egress(48),
                        cryptoRedirectIngress(49),
                        otherDefault(50),
                        ipRecir(51),
                        iPAdmissionL3Eou(52),
                        iPAdmissionL2Eou(53),
                        iPAdmissionL2EouArp(54),
                        ipAdmissionL2Http(55),
                        ipAdmissionL2HttpArp(56),
                        ipv4L3IntfNde(57),
                        ipv4L2IntfNde(58),
                        ipSguardIngress(59),
                        pvtHostsIngress(60),
                        vrfNatIngress(61),
                        tcpAdjustMssIngress(62),
                        tcpAdjustMssEgress(63),
                        eomIw(64),
                        eomIw2(65),
                        ipv4VrfNdeEgress(66),
                        l1Egress(67),
                        l1Ingress(68),
                        l1GlobalEgress(69),
                        l1GlobalIngress(70),
                        ipDot1xAcl(71),
                        ipDot1xAclArp(72),
                        dot1ad(73),
                        ipSpanPcap(74),
                        ipv6CryptoRedirectIngress(75),
                        svcAcclrtIngress(76),
                        ipv6SvcAcclrtIngress(77),
                        nfAggregation(78),
                        nfSampling(79),
                        ipv6Guardian(80),
                        ipv6Qos(81),
                        none(82)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the features supported by this flow
        mask." 
    ::= { cshcNetflowFlowMaskEntry 4 }
 

-- Netflow Resource Usage group
--   

--   
-- The cshcNetflowResourceUsageTable

cshcNetflowResourceUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcNetflowResourceUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains information regarding Netflow resource
        usage and utilization for a switching engine capable of 
        providing this information."
    ::= { cshcNetflowResourceUsage 1 }

cshcNetflowResourceUsageEntry OBJECT-TYPE
    SYNTAX          CshcNetflowResourceUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains information of the usage and
        utilization for a particular Netflow resource and
        switching engine, as specified by entPhysicalIndex
        in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcNetflowResourceUsageIndex
                    } 
    ::= { cshcNetflowResourceUsageTable 1 }

CshcNetflowResourceUsageEntry ::= SEQUENCE {
        cshcNetflowResourceUsageIndex Unsigned32,
        cshcNetflowResourceUsageDescr SnmpAdminString,
        cshcNetflowResourceUsageUtil  Percent,
        cshcNetflowResourceUsageUsed  Gauge32,
        cshcNetflowResourceUsageFree  Gauge32,
        cshcNetflowResourceUsageFail  Integer32
}

cshcNetflowResourceUsageIndex OBJECT-TYPE
    SYNTAX          Unsigned32 (1..2147483647)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "An arbitrary positive integer value that uniquely identifies a
        Netflow resource." 
    ::= { cshcNetflowResourceUsageEntry 1 }

cshcNetflowResourceUsageDescr OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates a description of the Netflow resource." 
    ::= { cshcNetflowResourceUsageEntry 2 }

cshcNetflowResourceUsageUtil OBJECT-TYPE
    SYNTAX          Percent
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the Netflow resource usage in
        percentage value." 
    ::= { cshcNetflowResourceUsageEntry 3 }

cshcNetflowResourceUsageUsed OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of Netflow entries used by
        this Netflow resource." 
    ::= { cshcNetflowResourceUsageEntry 4 }

cshcNetflowResourceUsageFree OBJECT-TYPE
    SYNTAX          Gauge32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of Netflow entries available
        for this Netflow resource." 
    ::= { cshcNetflowResourceUsageEntry 5 }

cshcNetflowResourceUsageFail OBJECT-TYPE
    SYNTAX          Integer32 (-1 | 0..2147483647)
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of Netflow entries which
        were failed to be created for this Netflow resource.

        A value of -1 indicates that this resource does not maintain
        this counter." 
    ::= { cshcNetflowResourceUsageEntry 6 }
 

-- The cshcQosResourceUsageTable

cshcQosResourceUsageTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CshcQosResourceUsageEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table contains QoS capacity per resource type
        and its usage for each entity capable of providing this    
        information."
    ::= { cshcQosResourceUsage 1 }

cshcQosResourceUsageEntry OBJECT-TYPE
    SYNTAX          CshcQosResourceUsageEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each row contains management information for QoS
        capacity and its usage on an entity, as specified by
        entPhysicalIndex in ENTITY-MIB."
    INDEX           {
                        entPhysicalIndex,
                        cshcQosResourceType
                    } 
    ::= { cshcQosResourceUsageTable 1 }

CshcQosResourceUsageEntry ::= SEQUENCE {
        cshcQosResourceType  INTEGER,
        cshcQosResourceUsed  Unsigned32,
        cshcQosResourceTotal Unsigned32
}

cshcQosResourceType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        aggregatePolicers(1),
                        distributedPolicers(2),
                        policerProfiles(3)
                    }
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object indicates the QoS resource type." 
    ::= { cshcQosResourceUsageEntry 1 }

cshcQosResourceUsed OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the number of QoS entries
        that are currently in use." 
    ::= { cshcQosResourceUsageEntry 2 }

cshcQosResourceTotal OBJECT-TYPE
    SYNTAX          Unsigned32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object indicates the total number of QoS
        entries available." 
    ::= { cshcQosResourceUsageEntry 3 }
 

-- Conformance

ciscoSwitchHardwareCapacityMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBConformance 1 }

ciscoSwitchHardwareCapacityMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoSwitchHardwareCapacityMIBConformance 2 }


-- ciscoSwitchHardwareCapacityMIBCompliance

ciscoSwitchHardwareCapacityMIBCompliance MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for
        CISCO-SWITCH-HARDWARE-CAPACITY-MIB. This statement is
        deprecated and superseded by 
        ciscoSwitchHardwareCapacityMIBCompliance1."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cshcMacUsageGroup,
                        cshcVpnCamUsageGroup,
                        cshcFibTcamUsageGroup,
                        cshcProtocolFibTcamUsageGroup,
                        cshcAdjacencyUsageGroup,
                        cshcForwardingLoadGroup,
                        cshcModuleInterfaceDropsGroup,
                        cshcInterfaceBufferGroup,
                        cshcInternalChannelGroup
                    }

    GROUP           cshcCPURateLimiterResourcesGroup
    DESCRIPTION
        "This group is mandatory where Rate Limit feature
        is supported."

    GROUP           cshcIcamResourcesGroup
    DESCRIPTION
        "This group is mandatory where ICAM is supported."

    GROUP           cshcNetflowFlowMaskResourceGroup
    DESCRIPTION
        "This group is mandatory where Netflow FlowMask feature
        is supported."
    ::= { ciscoSwitchHardwareCapacityMIBCompliances 1 }

ciscoSwitchHardwareCapacityMIBCompliance1 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for
        CISCO-SWITCH-HARDWARE-CAPACITY-MIB.

        This statement is deprecated and superseded by
        ciscoSwitchHardwareCapacityMIBCompliance2."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cshcMacUsageGroup,
                        cshcVpnCamUsageGroup,
                        cshcFibTcamUsageGroup,
                        cshcProtocolFibTcamUsageGroup,
                        cshcAdjacencyUsageGroup,
                        cshcForwardingLoadGroup,
                        cshcModuleInterfaceDropsGroup,
                        cshcInterfaceBufferGroup,
                        cshcInternalChannelGroup
                    }

    GROUP           cshcCPURateLimiterResourcesGroup
    DESCRIPTION
        "This group is mandatory where Rate Limit feature
        is supported."

    GROUP           cshcIcamResourcesGroup
    DESCRIPTION
        "This group is mandatory where ICAM is supported."

    GROUP           cshcNetflowFlowMaskResourceGroup
    DESCRIPTION
        "This group is mandatory where Netflow FlowMask feature
        is supported."

    GROUP           cshcFibTcamUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional FIB TCAM
        usage information is available."
    ::= { ciscoSwitchHardwareCapacityMIBCompliances 2 }

ciscoSwitchHardwareCapacityMIBCompliance2 MODULE-COMPLIANCE
    STATUS          deprecated
    DESCRIPTION
        "The compliance statement for
        CISCO-SWITCH-HARDWARE-CAPACITY-MIB"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cshcMacUsageGroup,
                        cshcVpnCamUsageGroup,
                        cshcFibTcamUsageGroup,
                        cshcProtocolFibTcamUsageGroup,
                        cshcAdjacencyUsageGroup,
                        cshcForwardingLoadGroup,
                        cshcModuleInterfaceDropsGroup,
                        cshcInterfaceBufferGroup,
                        cshcInternalChannelGroup
                    }

    GROUP           cshcCPURateLimiterResourcesGroup
    DESCRIPTION
        "This group is mandatory where Rate Limit feature
        is supported."

    GROUP           cshcIcamResourcesGroup
    DESCRIPTION
        "This group is mandatory where ICAM is supported."

    GROUP           cshcNetflowFlowMaskResourceGroup
    DESCRIPTION
        "This group is mandatory where Netflow FlowMask feature
        is supported."

    GROUP           cshcFibTcamUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional FIB TCAM
        usage information is available."

    GROUP           cshcNetflowFlowResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where Netflow resource usage
        information is available."

    GROUP           cshcMacUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional Layer 2 Forwarding
        usage information is available."

    GROUP           cshcProtocolFibTcamUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional FIB TCAM
        usage information is available."

    GROUP           cshcAdjacencyResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where per resource type adjacency
        capacity and usage information is available."

    GROUP           cshcQosResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where QoS capacity and
        usage information is available."

    GROUP           cshcModTopDropIfIndexListGroup
    DESCRIPTION
        "This group is mandatory for platforms which can have
        multiple interfaces with largest number of total dropped
        packets on a module."

    GROUP           cshcMetResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where MET usage information
        is available."
    ::= { ciscoSwitchHardwareCapacityMIBCompliances 3 }

ciscoSwitchHardwareCapacityMIBCompliance3 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for
        CISCO-SWITCH-HARDWARE-CAPACITY-MIB"
    MODULE          -- this module
    MANDATORY-GROUPS {
                        cshcMacUsageGroup,
                        cshcVpnCamUsageGroup,
                        cshcFibTcamUsageGroup,
                        cshcProtocolFibTcamUsageGroup,
                        cshcAdjacencyUsageGroup,
                        cshcForwardingLoadGroup,
                        cshcModuleInterfaceDropsGroup,
                        cshcInterfaceBufferGroup,
                        cshcInternalChannelGroup
                    }

    GROUP           cshcCPURateLimiterResourcesGroup
    DESCRIPTION
        "This group is mandatory where Rate Limit feature
        is supported."

    GROUP           cshcIcamResourcesGroup
    DESCRIPTION
        "This group is mandatory where ICAM is supported."

    GROUP           cshcNetflowFlowMaskResourceGroup
    DESCRIPTION
        "This group is mandatory where Netflow FlowMask feature
        is supported."

    GROUP           cshcFibTcamUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional FIB TCAM
        usage information is available."

    GROUP           cshcNetflowFlowResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where Netflow resource usage
        information is available."

    GROUP           cshcMacUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional Layer 2 Forwarding
        usage information is available."

    GROUP           cshcProtocolFibTcamUsageExtGroup
    DESCRIPTION
        "This group is mandatory where additional FIB TCAM
        usage information is available."

    GROUP           cshcAdjacencyResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where per resource type adjacency
        capacity and usage information is available."

    GROUP           cshcQosResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where QoS capacity and
        usage information is available."

    GROUP           cshcModTopDropIfIndexListGroup
    DESCRIPTION
        "This group is mandatory for platforms which can have
        multiple interfaces with largest number of total dropped
        packets on a module."

    GROUP           cshcMetResourceUsageGroup
    DESCRIPTION
        "This group is mandatory where MET usage information
        is available."

    GROUP           cshcProtocolFibTcamWidthTypeGroup
    DESCRIPTION
        "This group is mandatory where FIB TCAM entry width
        information is available."

    GROUP           cshcForwardingResourceGroup
    DESCRIPTION
        "This group is mandatory where forwarding table resource 
        information is available."
    ::= { ciscoSwitchHardwareCapacityMIBCompliances 4 }

-- Units of Conformance

cshcMacUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcMacCollisions,
                        cshcMacUsed,
                        cshcMacTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides Layer 2
        forwarding hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 1 }

cshcVpnCamUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcVpnCamUsed,
                        cshcVpnCamTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides VPN CAM
        hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 2 }

cshcFibTcamUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshc72bitsFibTcamUsed,
                        cshc72bitsFibTcamTotal,
                        cshc144bitsFibTcamUsed,
                        cshc144bitsFibTcamTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides FIB TCAM
        hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 3 }

cshcProtocolFibTcamUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcProtocolFibTcamUsed,
                        cshcProtocolFibTcamTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides FIB TCAM
        hardware capacity information in conjunction with
        Layer 3 protocol in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 4 }

cshcAdjacencyUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcAdjacencyUsed,
                        cshcAdjacencyTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides adjacency
        hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 5 }

cshcForwardingLoadGroup OBJECT-GROUP
    OBJECTS         {
                        cshcForwardingLoadPktRate,
                        cshcForwardingLoadPktPeakRate,
                        cshcForwardingLoadPktPeakTime
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides forwarding
        load information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 6 }

cshcModuleInterfaceDropsGroup OBJECT-GROUP
    OBJECTS         {
                        cshcModTxTotalDroppedPackets,
                        cshcModRxTotalDroppedPackets,
                        cshcModTxTopDropPort,
                        cshcModRxTopDropPort
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides linecard
        drop traffic information on the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 7 }

cshcInterfaceBufferGroup OBJECT-GROUP
    OBJECTS         {
                        cshcInterfaceTransmitBufferSize,
                        cshcInterfaceReceiveBufferSize
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides interface
        buffer information on the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 8 }

cshcInternalChannelGroup OBJECT-GROUP
    OBJECTS         {
                        cshcIntlChnlRxPacketRate,
                        cshcIntlChnlRxTotalPackets,
                        cshcIntlChnlRxDroppedPackets,
                        cshcIntlChnlTxPacketRate,
                        cshcIntlChnlTxTotalPackets,
                        cshcIntlChnlTxDroppedPackets
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides internal
        channel information on the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 9 }

cshcCPURateLimiterResourcesGroup OBJECT-GROUP
    OBJECTS         {
                        cshcCPURateLimiterTotal,
                        cshcCPURateLimiterUsed,
                        cshcCPURateLimiterReserved
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides CPU rate limiter
        resource in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 10 }

cshcIcamResourcesGroup OBJECT-GROUP
    OBJECTS         {
                        cshcIcamCreated,
                        cshcIcamFailed,
                        cshcIcamUtilization
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides ICAM resources
        information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 11 }

cshcNetflowFlowMaskResourceGroup OBJECT-GROUP
    OBJECTS         {
                        cshcNetflowFlowMaskType,
                        cshcNetflowFlowMaskFeature
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides Netflow FlowMask
        information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 12 }

cshcFibTcamUsageExtGroup OBJECT-GROUP
    OBJECTS         {
                        cshc288bitsFibTcamUsed,
                        cshc288bitsFibTcamTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides additional FIB TCAM
        hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 13 }

cshcNetflowFlowResourceUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcNetflowResourceUsageDescr,
                        cshcNetflowResourceUsageUtil,
                        cshcNetflowResourceUsageUsed,
                        cshcNetflowResourceUsageFree,
                        cshcNetflowResourceUsageFail
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides Netflow resource
        usage information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 14 }

cshcMacUsageExtGroup OBJECT-GROUP
    OBJECTS         {
                        cshcMacMcast,
                        cshcMacUcast,
                        cshcMacLines,
                        cshcMacLinesFull
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides additional Layer 2
        forwarding hardware capacity information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 15 }

cshcProtocolFibTcamUsageExtGroup OBJECT-GROUP
    OBJECTS         {
                        cshcProtocolFibTcamLogicalUsed,
                        cshcProtocolFibTcamLogicalTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides additional FIB TCAM
        hardware capacity information in conjunction with
        Layer 3 protocol in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 16 }

cshcAdjacencyResourceUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcAdjacencyResourceDescr,
                        cshcAdjacencyResourceUsed,
                        cshcAdjacencyResourceTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides adjacency
        hardware capacity information per resource in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 17 }

cshcQosResourceUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcQosResourceUsed,
                        cshcQosResourceTotal
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides QoS
        hardware capacity information per resource in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 18 }

cshcModTopDropIfIndexListGroup OBJECT-GROUP
    OBJECTS         {
                        cshcModTxTopDropIfIndexList,
                        cshcModRxTopDropIfIndexList
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides information on
        multiple interfaces with largest number of drop traffic 
        on a module."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 19 }

cshcMetResourceUsageGroup OBJECT-GROUP
    OBJECTS         {
                        cshcMetResourceDescr,
                        cshcMetResourceUsed,
                        cshcMetResourceTotal,
                        cshcMetResourceMcastGrp
                    }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides MET hardware
        capacity information per resource in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 20 }

cshcProtocolFibTcamWidthTypeGroup OBJECT-GROUP
    OBJECTS         { cshcProtocolFibTcamWidthType }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides FIB TCAM entry
        width information in conjunction with Layer 3 protocol
        in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 21 }

cshcForwardingResourceGroup OBJECT-GROUP
    OBJECTS         {
                        cshcForwardingResourceDescr,
                        cshcForwardingResourceValue
                     }
    STATUS          current
    DESCRIPTION
        "A collection of objects which provides forwarding table
         resource information in the device."
    ::= { ciscoSwitchHardwareCapacityMIBGroups 22}

END


