-- *******************************************************************
-- CISCO-LWAPP-TAGS-MIB.my
-- April 2016, Ambika Prasad Mohanty
--   
-- Copyright (c) 2016-2018 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************

CISCO-LWAPP-TAGS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP
        FROM SNMPv2-CONF
    Integer32
        FROM SNMPv2-SMI
    TruthValue,
    RowStatus
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    MacAddress
        FROM SNMPv2-TC
    ciscoMgmt
        FROM CISCO-SMI;


-- ********************************************************************
-- *  MODULE IDENTITY
-- ********************************************************************

ciscoLwappTagsMIB MODULE-IDENTITY
    LAST-UPDATED    "201809200000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service
            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS
            Email:  cs-wnbu-snmp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central Controllers (CC)  that
        terminate the Light Weight Access Point Protocol
        tunnel from Cisco Light-weight LWAPP Access Points.

        Information represented by this MIB is 
        passed by the controller to those Cisco LWAPP APs, that can
        operate in stand-alone mode.

        The relationship between CC and the LWAPP APs can be depicted
        as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
          ..            .             .                 .
          ..            .             .                 .
         .  .            .             .                 .
        .    .            .             .                 .
        .      .            .             .                 .
        .        .            .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+
              .              .             .                 .
            .  .              .             .                 .
           .    .              .             .                 .
          .      .              .             .                 .
         .        .              .             .                 .
        +......+ +......+     +......+      +......+          +......+
        +      + +      +     +      +      +      +          +      +
        +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
        +      + +      +     +      +      +      +          +      +
        +......+ +......+     +......+      +......+          +......+


        The LWAPP tunnel exists between the controller
        and the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                                   GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.          

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends them to the controller to which
        it is logically connected.        

        Central Controller ( CC )        

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity is also referred to as 'controller'.        

        Light Weight Access Point Protocol ( LWAPP )

        This is a generic protocol that defines the
        communication between the Access Points and the
        Central Controller.        

        Mobile Node ( MN )        

        A roaming 802.11 wireless device in a wireless
        network associated with an access point.        

        Native VLAN ID

        A switch port and/or AP can be configured with a
        'native VLAN ID'.  Untagged or priority-tagged
        frames are implicitly associated with the native
        VLAN ID.  The default native VLAN ID is '1' if
        VLAN tagging is enabled.  The native VLAN ID is '0'
        or 'no VLAN ID' if VLAN tagging is not enabled.        

        Remote Edge Access Point ( REAP )        

        The LWAPP AP that can also act as a stand-alone AP
        when it loses communication with the controller
        it was associated with.        

        When REAP can reach the controller (connected state),
        it gets help from controller to complete client
        authentication. When a controller is not reachable by
        REAP, it goes into standalone state and does client
        authentication by itself.  All data packets from
        clients are either bridged locally (local-switch)
        or forwarded to the controller (central-switch)
        depending on the WLAN configuration.        

        Virtual LAN        

        VLAN defined in the IEEE 802.1Q VLAN standard
        supports logically segmenting of LAN
        infrastructure into different subnets or
        workgroups so that packets are switched only
        between ports within the same VLAN.        

        VLAN ID

        Each VLAN is identified by a 12-bit 'VLAN ID'.
        A VLAN ID of '0' is used to indicate 'no VLAN ID'.
        Valid VLAN IDs range from '1' to '4095'. 

        Home AP 
        A REAP AP can be installed at end-user home. Home 
        AP ethernet port will be connected to DSL or cable
        modem at home. Home AP will be primed with Controller
        IP Address so that it will join with controller.        

        REFERENCE
        [1] Part 11 Wireless LAN Medium Access Control ( MAC )
        and Physical Layer ( PHY ) Specifications"
    REVISION        "201809200000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 858 }


ciscoLwappTagsMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIB 0 }

ciscoLwappTagsMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIB 1 }

ciscoLwappTagsMIBConform  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIB 2 }

ciscoLwappPolicyTagConfig  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBObjects 1 }

ciscoLwappSiteTagConfig  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBObjects 2 }

ciscoLwappRfTagConfig  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBObjects 3 }

ciscoLwappApTag  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBObjects 4 }

ciscoLwappApFilter  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBObjects 5 }

-- ********************************************************************
-- Policy Tag configuration
-- ********************************************************************

cLPolicyTagConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLPolicyTagConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the policy tag configuration of
        controller. Policy tag is defined as a tag which has a set of
        WLAN profile names to policy profile names. Policy tag applied
        to an AP decides the list of SSID gets broadcasted. The SSID
        properties are defined by both WLAN profile and Policy profile."
    ::= { ciscoLwappPolicyTagConfig 1 }

cLPolicyTagConfigEntry OBJECT-TYPE
    SYNTAX          CLPolicyTagConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in
        cLPolicyTagConfigTable and corresponds to a policy tag in a 
        controller."
    INDEX           { cLPolicyTagName } 
    ::= { cLPolicyTagConfigTable 1 }

CLPolicyTagConfigEntry ::= SEQUENCE {
        cLPolicyTagName        SnmpAdminString,
        cLPolicyTagDescription SnmpAdminString,
        cLPolicyTagRowStatus   RowStatus
}

cLPolicyTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies an entry in
        cLPolicyTagConfigTable." 
    ::= { cLPolicyTagConfigEntry 1 }

cLPolicyTagDescription OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to specify the description
        of the policy tag." 
    ::= { cLPolicyTagConfigEntry 2 }

cLPolicyTagRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the policy
        tag table." 
    ::= { cLPolicyTagConfigEntry 3 }
 

-- ********************************************************************
-- Policy Profile configuration
-- ********************************************************************

cLPolicyProfileConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLPolicyProfileConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the policy profile configuration  of
        controller."
    ::= { ciscoLwappPolicyTagConfig 2 }

cLPolicyProfileConfigEntry OBJECT-TYPE
    SYNTAX          CLPolicyProfileConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in
        CLPolicyProfileConfigEntryTable and corresponds to a
        policy tag in controller."
    INDEX           {
                        cLPolicyTagName,
                        cLProfileName
                    } 
    ::= { cLPolicyProfileConfigTable 1 }

CLPolicyProfileConfigEntry ::= SEQUENCE {
        cLProfileName            SnmpAdminString,
        cLPolicyProfileName      SnmpAdminString,
        cLPolicyProfileRowStatus RowStatus
}

cLProfileName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies the wlan profile configured to
        a given policy tag" 
    ::= { cLPolicyProfileConfigEntry 1 }

cLPolicyProfileName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies the policy profile
        name that is mapped to the wlan profile part of this
        policy tag." 
    ::= { cLPolicyProfileConfigEntry 2 }

cLPolicyProfileRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the policy
        tag table." 
    ::= { cLPolicyProfileConfigEntry 3 }
 

-- ********************************************************************
-- RLAN-Policy Profile configuration
-- ********************************************************************

cLRlanPolicyProfileConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLRlanPolicyProfileConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the mapping of the RLAN-policy
        to the policy tag configuration of controller. 
        Policy tag is defined as a tag which has a 
        set of WLAN and RLAN profile names attached to policy
        profile names. Policy tag, when used/attached to an AP
        defines the policy names for RLAN profiles which should be
        used by the clients associated to the corresponding RLANs."
    ::= { ciscoLwappPolicyTagConfig 3 }

cLRlanPolicyProfileConfigEntry OBJECT-TYPE
    SYNTAX          CLRlanPolicyProfileConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in
        cLRlanPolicyProfileConfigTable and corresponds to a
        RLAN policy associated with the given policy tag"
    INDEX           {
                        cLPolicyTagName,
                        cLRlanPortID
                    } 
    ::= { cLRlanPolicyProfileConfigTable 1 }

CLRlanPolicyProfileConfigEntry ::= SEQUENCE {
        cLRlanPortID                 Integer32,
        cLRlanProfile                SnmpAdminString,
        cLRlanPolicyProfile          SnmpAdminString,
        cLRlanPolicyProfileRowStatus RowStatus
}

cLRlanPortID OBJECT-TYPE
    SYNTAX          Integer32 (1..4)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies an entry in
        cLRlanPolicyProfileConfigTable." 
    ::= { cLRlanPolicyProfileConfigEntry 1 }

cLRlanProfile OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object identifies the RLAN profile associated
        with the given cLRlanPortID." 
    ::= { cLRlanPolicyProfileConfigEntry 2 }

cLRlanPolicyProfile OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies the RLAN policy profile
        name that is mapped to the RLAN profile part of this
        policy tag." 
    ::= { cLRlanPolicyProfileConfigEntry 3 }

cLRlanPolicyProfileRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the
        cLRlanPolicyProfileConfigTable table." 
    ::= { cLRlanPolicyProfileConfigEntry 4 }
 

-- ********************************************************************
-- RF Tag configuration
-- ********************************************************************

cLRfTagConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLRfTagConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the RF tag configuration of controller.
        RF tag is defined as a tag which has a couple of RF profiles
        attached to it corresponding to 11z and 11b/g radios."
    ::= { ciscoLwappRfTagConfig 1 }

cLRfTagConfigEntry OBJECT-TYPE
    SYNTAX          CLRfTagConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in cLRFTagConfigTable
        and corresponds to an RF tag in a Controller."
    INDEX           { cLRfTagName } 
    ::= { cLRfTagConfigTable 1 }

CLRfTagConfigEntry ::= SEQUENCE {
        cLRfTagName        SnmpAdminString,
        cLRfTagRowStatus   RowStatus,
        cL11aRfProfName    SnmpAdminString,
        cL11bRfProfName    SnmpAdminString,
        cLRfTagDescription SnmpAdminString
}

cLRfTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object uniquely identifies an RF tag entry in
        cLRFTagConfigTable." 
    ::= { cLRfTagConfigEntry 1 }

cLRfTagRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the RF
        tag table." 
    ::= { cLRfTagConfigEntry 2 }

cL11aRfProfName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object identifies the 802.11a RF profile configured under
        RF tag." 
    ::= { cLRfTagConfigEntry 3 }

cL11bRfProfName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the 802.11b RF profile configured under
        RF tag." 
    ::= { cLRfTagConfigEntry 4 }

cLRfTagDescription OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the description
        of the RF tag." 
    ::= { cLRfTagConfigEntry 5 }
 

-- ********************************************************************
-- Site Tag configuration
-- ********************************************************************

cLSiteTagConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLSiteTagConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the site tag configuration of controller.
        Site tag is defined as a tag which has the AP join profile and
        the flex profile within it."
    ::= { ciscoLwappSiteTagConfig 1 }

cLSiteTagConfigEntry OBJECT-TYPE
    SYNTAX          CLSiteTagConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry represents a conceptual row in
        cLSiteTagConfigTable and corresponds to an site
        tag in a controller."
    INDEX           { cLSiteTagName } 
    ::= { cLSiteTagConfigTable 1 }

CLSiteTagConfigEntry ::= SEQUENCE {
        cLSiteTagName                         SnmpAdminString,
        cLSiteTagRowStatus                    RowStatus,
        cLApJoinProfName                      SnmpAdminString,
        cLFlexProfName                        SnmpAdminString,
        cLSiteTagDescription                  SnmpAdminString,
        cLReapSiteUpgradeStart                INTEGER,
        cLReapSiteTagStartCertificateDownload TruthValue,
        cLIsLocalSite                         TruthValue
}

cLSiteTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object uniquely represent the site tag name." 
    ::= { cLSiteTagConfigEntry 1 }

cLSiteTagRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the site
        tag table." 
    ::= { cLSiteTagConfigEntry 2 }

cLApJoinProfName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the AP join profile name which is part of
        the site tag." 
    ::= { cLSiteTagConfigEntry 3 }

cLFlexProfName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the flex profile name which is part of
        the site tag." 
    ::= { cLSiteTagConfigEntry 4 }

cLSiteTagDescription OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (0..64))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the description of the site tag." 
    ::= { cLSiteTagConfigEntry 5 }

cLReapSiteUpgradeStart OBJECT-TYPE
    SYNTAX          INTEGER  {
                        initiatePrimary(1),
                        initiateBackup(2),
                        abort(3)
                    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the efficient AP image upgrade for the
        heap group.
        initiatePrimary -  Efficient AP image upgrade for heap group
                           is done with primary
        initiateBackup - Efficient AP image upgrade for heap group is
                         done with backup
        abort - Efficient AP image upgrade for heap group is aborted." 
    ::= { cLSiteTagConfigEntry 6 }

cLReapSiteTagStartCertificateDownload OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether certificate for
        EAP-TLS is enabled.
        A value of 'true' indicates that EAP-TLS is enabled.
        A value of 'false' indicates that EAP-TLS is disabled."
    DEFVAL          { false } 
    ::= { cLSiteTagConfigEntry 7 }

cLIsLocalSite OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether local site is enabled or not.
        A value of 'true' indicates that local site is enabled.
        A value of 'false' indicates that local site is disabled."
    DEFVAL          { true } 
    ::= { cLSiteTagConfigEntry 8 }
 

-- ********************************************************************
-- AP Tag Mapping configuration
-- ********************************************************************

cLApConfigTagTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLApConfigTagEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table provides the mapping of AP to the various tags."
    ::= { ciscoLwappApTag 1 }

cLApConfigTagEntry OBJECT-TYPE
    SYNTAX          CLApConfigTagEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry in this table provides information about the tags
        that the AP is mapped to."
    INDEX           { cLApConfigTagSysMacAddress } 
    ::= { cLApConfigTagTable 1 }

CLApConfigTagEntry ::= SEQUENCE {
        cLApConfigTagSysMacAddress MacAddress,
        cLApConfigPolicyTagName    SnmpAdminString,
        cLApConfigRfTagName        SnmpAdminString,
        cLApConfigSiteTagName      SnmpAdminString,
        cLApConfigTagRowStatus     RowStatus
}

cLApConfigTagSysMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the ethernet MAC of the AP and uniquely
        identifies an entry in this table." 
    ::= { cLApConfigTagEntry 1 }

cLApConfigPolicyTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the policy tag that is configured for a
        particular AP with cLApTagSysMacAddress as its ethernet mac." 
    ::= { cLApConfigTagEntry 2 }

cLApConfigRfTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the RF tag that is configured for a
        particular AP with cLApTagSysMacAddress as its ethernet mac." 
    ::= { cLApConfigTagEntry 3 }

cLApConfigSiteTagName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the site tag that is configured a
        particular AP with cLApTagSysMacAddress as its ethernet mac." 
    ::= { cLApConfigTagEntry 4 }

cLApConfigTagRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the site tag table." 
    ::= { cLApConfigTagEntry 5 }
 

-- ********************************************************************
-- AP Filter configuration
-- ********************************************************************

cLApFilterTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLApFilterEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table provides the various AP filter config."
    ::= { ciscoLwappApFilter 1 }

cLApFilterEntry OBJECT-TYPE
    SYNTAX          CLApFilterEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry in this table provides information about the AP
        filter config."
    INDEX           { cLApFilterName } 
    ::= { cLApFilterTable 1 }

CLApFilterEntry ::= SEQUENCE {
        cLApFilterName           SnmpAdminString,
        cLApFilterRowStatus      RowStatus,
        cLApFilterNameApNameRule SnmpAdminString,
        cLApFilterPolicyTag      SnmpAdminString,
        cLApFilterSiteTag        SnmpAdminString,
        cLApFilterRfTag          SnmpAdminString
}

cLApFilterName OBJECT-TYPE
    SYNTAX          SnmpAdminString (SIZE  (1..32))
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the name given to the AP filter
        configured to uniquely identify the filter." 
    ::= { cLApFilterEntry 1 }

cLApFilterRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the AP filter table." 
    ::= { cLApFilterEntry 2 }

cLApFilterNameApNameRule OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies AP name string based on which AP filter
        is configured." 
    ::= { cLApFilterEntry 3 }

cLApFilterPolicyTag OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies policy tag details for AP filter
        configured." 
    ::= { cLApFilterEntry 4 }

cLApFilterSiteTag OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies site tag details for AP filter
        configured." 
    ::= { cLApFilterEntry 5 }

cLApFilterRfTag OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies RF tag details for AP filter
        configured." 
    ::= { cLApFilterEntry 6 }
 

-- ********************************************************************
-- AP Filter Priority configuration
-- ********************************************************************

cLApFilterPriorityTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLApFilterPriorityEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table provides the various AP filter config."
    ::= { ciscoLwappApFilter 2 }

cLApFilterPriorityEntry OBJECT-TYPE
    SYNTAX          CLApFilterPriorityEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry in this table provides information about the AP
        filter priority config."
    INDEX           { cLApFilterPriority } 
    ::= { cLApFilterPriorityTable 1 }

CLApFilterPriorityEntry ::= SEQUENCE {
        cLApFilterPriority           Integer32,
        cLApFilterPriorityRowStatus  RowStatus,
        cLApFilterPriorityFilterName SnmpAdminString
}

cLApFilterPriority OBJECT-TYPE
    SYNTAX          Integer32 (0..127)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the priority given to the AP filter
        that is configured uniquely." 
    ::= { cLApFilterPriorityEntry 1 }

cLApFilterPriorityRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the AP filter
        priority table." 
    ::= { cLApFilterPriorityEntry 2 }

cLApFilterPriorityFilterName OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies AP name for which the priority
        is been set." 
    ::= { cLApFilterPriorityEntry 3 }
 

-- ********************************************************************
-- AP Filter Source configuration
-- ********************************************************************

cLApTagSrcTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLApTagSrcEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table provides the details on various AP filter source
        configuration."
    ::= { ciscoLwappApTag 2 }

cLApTagSrcEntry OBJECT-TYPE
    SYNTAX          CLApTagSrcEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry in this table provides information about the AP
        filter priority source config."
    INDEX           { cLApTagSrcPriority } 
    ::= { cLApTagSrcTable 1 }

CLApTagSrcEntry ::= SEQUENCE {
        cLApTagSrcPriority  Integer32,
        cLApTagSrcRowStatus RowStatus,
        cLApTagSrcList      INTEGER
}

cLApTagSrcPriority OBJECT-TYPE
    SYNTAX          Integer32 (0..127)
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object specifies the priority given to the AP filter
        tag source." 
    ::= { cLApTagSrcEntry 1 }

cLApTagSrcRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the row status of the AP filter
        tag source table." 
    ::= { cLApTagSrcEntry 2 }

cLApTagSrcList OBJECT-TYPE
    SYNTAX          INTEGER  {
                        none(1),
                        static(2),
                        filter(3),
                        ap(4),
                        default(5),
                        location(6)
                    }
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies the list sources for AP tags.
        none       - Invalid
        static     - per AP static configuration
        filter     - The tag details for the AP is taken from 
                     the active filter.
        ap         - tags received from AP during AP join. 
        default    - default tags.
        location   - tags configured under user defined Location 
                     construct." 
    ::= { cLApTagSrcEntry 3 }
 

-- ********************************************************************
-- *    Compliance statements
-- ********************************************************************

ciscoLwappTagsMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBConform 1 }

ciscoLwappTagsMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoLwappTagsMIBConform 2 }


ciscoLwappTagsMIBCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement the ciscoLwappTagsMIB module."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappTagsConfigGroup,
                        ciscoLwappFilterConfigGroup,
                        ciscoLwappRlanConfigGroup
                    }
    ::= { ciscoLwappTagsMIBCompliances 1 }

-- ********************************************************************
-- *    Units of conformance
-- ********************************************************************

ciscoLwappTagsConfigGroup OBJECT-GROUP
    OBJECTS         {
                        cLPolicyTagDescription,
                        cLPolicyTagRowStatus,
                        cLPolicyProfileName,
                        cLPolicyProfileRowStatus,
                        cLRfTagRowStatus,
                        cLRfTagDescription,
                        cL11aRfProfName,
                        cL11bRfProfName,
                        cLSiteTagRowStatus,
                        cLApJoinProfName,
                        cLFlexProfName,
                        cLSiteTagDescription,
                        cLReapSiteUpgradeStart,
                        cLReapSiteTagStartCertificateDownload,
                        cLIsLocalSite,
                        cLApConfigPolicyTagName,
                        cLApConfigRfTagName,
                        cLApConfigSiteTagName,
                        cLApConfigTagRowStatus,
                        cLApTagSrcRowStatus,
                        cLApTagSrcList
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the Policy tags
        configuration."
    ::= { ciscoLwappTagsMIBGroups 1 }

ciscoLwappFilterConfigGroup OBJECT-GROUP
    OBJECTS         {
                        cLApFilterRowStatus,
                        cLApFilterNameApNameRule,
                        cLApFilterPolicyTag,
                        cLApFilterRfTag,
                        cLApFilterSiteTag,
                        cLApFilterPriorityRowStatus,
                        cLApFilterPriorityFilterName
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the AP filter
        configuration."
    ::= { ciscoLwappTagsMIBGroups 2 }

ciscoLwappRlanConfigGroup OBJECT-GROUP
    OBJECTS         {
                        cLRlanPolicyProfile,
                        cLRlanPolicyProfileRowStatus
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the Rlan policy
        configuration."
    ::= { ciscoLwappTagsMIBGroups 3 }

END


