-- *******************************************************************
-- CISCO-LWAPP-CCX-RM-MIB.my: 
-- Light Weight Access Point Wireless client CCX Radio Measurement
-- MIB
-- December 2005, Devesh Pujari, Bharat Biswal, Prasanna Viswakumar
--
-- Copyright (c) 2005-2006, 2017 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************

CISCO-LWAPP-CCX-RM-MIB DEFINITIONS ::= BEGIN

IMPORTS 
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Integer32
                FROM SNMPv2-SMI
        MODULE-COMPLIANCE,
        OBJECT-GROUP
                FROM SNMPv2-CONF
        MacAddress,
        TruthValue,
        TimeInterval,
        TimeStamp
                FROM SNMPv2-TC
--      cLWlanConfigEntry
        cLWlanIndex
                FROM CISCO-LWAPP-WLAN-MIB
--      cLApDot11IfEntry,
        cLApSysMacAddress,
        cLApDot11IfSlotId 
                FROM CISCO-LWAPP-AP-MIB
        ciscoMgmt
                FROM CISCO-SMI;

--**********************************************************************
--*  MODULE IDENTITY
--**********************************************************************

ciscoLwappCcxRmMIB     MODULE-IDENTITY
        LAST-UPDATED   "201704180000Z"
        ORGANIZATION   "Cisco Systems Inc."
        CONTACT-INFO  
                "       Cisco Systems,
                        Customer Service
                Postal: 170 West Tasman Drive
                        San Jose, CA  95134
                        USA
                   Tel: +1 800 553-NETS

                 Email: cs-aironet@cisco.com"

        DESCRIPTION
                "This MIB is intended to be implemented on all those
                devices operating as Central controllers, that
                terminate the Light Weight Access Point Protocol
                tunnel from Cisco Light-weight LWAPP Access Points.

                Information provided by this MIB is for CCX related 
                features as specified in the CCX specifications. 

                The relationship between CC and the LWAPP APs
                can be depicted as follows:

        +......+     +......+     +......+           +......+
        +      +     +      +     +      +           +      +
        +  CC  +     +  CC  +     +  CC  +           +  CC  +
        +      +     +      +     +      +           +      +
        +......+     +......+     +......+           +......+
          ..            .             .                 .
          ..            .             .                 .
         .  .            .             .                 .
        .    .            .             .                 .
       .      .            .             .                 .
      .        .            .             .                 .
   +......+ +......+     +......+      +......+          +......+
   +      + +      +     +      +      +      +          +      +
   +  AP  + +  AP  +     +  AP  +      +  AP  +          +  AP  +
   +      + +      +     +      +      +      +          +      +
   +......+ +......+     +......+      +......+          +......+
              .              .             .                 .
            .  .              .             .                 .
           .    .              .             .                 .
          .      .              .             .                 .
         .        .              .             .                 .
      +......+ +......+     +......+      +......+          +......+
      +      + +      +     +      +      +      +          +      +
      +  MN  + +  MN  +     +  MN  +      +  MN  +          +  MN  +
      +      + +      +     +      +      +      +          +      +
      +......+ +......+     +......+      +......+          +......+


                The LWAPP tunnel exists between the controller and
                the APs.  The MNs communicate with the APs through
                the protocol defined by the 802.11 standard.

                LWAPP APs, upon bootup, discover and join one of the
                controllers and the controller pushes the configuration,
                that includes the WLAN parameters, to the LWAPP APs.
                The APs then encapsulate all the 802.11 frames from
                wireless clients inside LWAPP frames and forward
                the LWAPP frames to the controller.

                                   GLOSSARY

                Access Point ( AP )

                An entity that contains an 802.11 medium access
                control ( MAC ) and physical layer ( PHY ) interface
                and provides access to the distribution services via
                the wireless medium for associated clients.  

                LWAPP APs encapsulate all the 802.11 frames in
                LWAPP frames and sends them to the controller to which
                it is logically connected.

                Central Controller ( CC )

                The central entity that terminates the LWAPP protocol
                tunnel from the LWAPP APs.  Throughout this MIB,
                this entity also referred to as 'controller'.

                Cisco Compatible eXtensions (CCX)
                
                Wireless LAN Access Points (APs) manufactured by Cisco
                Systems have features and capabilities beyond those in
                related standards (e.g., IEEE 802.11 suite of 
                standards, Wi-Fi recommendations by WECA, 802.1X 
                security suite, etc). A number of features provide 
                higher performance. For example, Cisco AP transmits a 
                specific Information Element, which the clients adapt 
                to for enhanced performance. Similarly, a number of 
                features are implemented by means of proprietary 
                Information Elements, which Cisco clients use in 
                specific ways to carry out tasks above and beyond the
                standard. Other examples of feature categories are 
                roaming and power saving.

                Light Weight Access Point Protocol ( LWAPP ) 

                This is a generic protocol that defines the 
                communication between the Access Points and the
                Central Controller.

                Mobile Node ( MN )

                A roaming 802.11 wireless device in a wireless
                network associated with an access point.  The terms  
                'Mobile node' and 'client' are used interchangeably. 
                
                Radio Management (RM)
    
                This term refers to managing the 802.11 radio
                environment to provide the best quality service to
                to the 802.11 wireless clients. 

                Service Set Identifier ( SSID ) 

                SSID is a unique identifier that APs and clients
                use to identify with each other.  SSID is a simple
                means of access control and is not for security.
                The SSID can be any alphanumeric entry up to 32
                characters.

                REFERENCE
 
                [1] Wireless LAN Medium Access Control ( MAC ) and
                Physical Layer ( PHY ) Specifications
  
                [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
                Weight Access Point Protocol " 
        REVISION      "201704180000Z"
        DESCRIPTION
                "Updated description for the existing 
                objects in accordance with MIB standard"

        REVISION      "201202210000Z"
        DESCRIPTION
                "Added ciscoLwappCcxRmDot11aConfigGroupVer1,
                ciscoLwappCcxRmDot11bConfigGroupVer1,
                and ciscoLwappCcxRmApIfConfigGroupVer1. 
                Deprecated ciscoLwappCcxRmDot11aConfigGroup,
                ciscoLwappCcxRmDot11bConfigGroup,
                and ciscoLwappCcxRmApIfConfigGroup. 
                Added ciscoLwappCcxRmMIBComplianceVer1 and 
                deprecated ciscoLwappCcxRmMIBCompliance."
        REVISION      "200604110000Z"
        DESCRIPTION
                "Initial version of this MIB module. "
        ::= { ciscoMgmt 520 }
        
ciscoLwappCcxRmMIBNotifs  OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 0 }

ciscoLwappCcxRmMIBObjects OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 1 }

ciscoLwappCcxRmMIBConform OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIB 2 }

clcrDot11aConfigGlobal OBJECT IDENTIFIER 
        ::= { ciscoLwappCcxRmMIBObjects 1 }

clcrDot11bConfigGlobal OBJECT IDENTIFIER 
        ::= { ciscoLwappCcxRmMIBObjects 2 }

clcrApIfConfig OBJECT IDENTIFIER   ::= { ciscoLwappCcxRmMIBObjects 3 }

clcrClientMeasurementReport OBJECT IDENTIFIER
        ::= { ciscoLwappCcxRmMIBObjects 4 }

clcrWlanConfig OBJECT IDENTIFIER ::= { ciscoLwappCcxRmMIBObjects 5 }

--**********************************************************************
-- Client Measurement request per 802.11a network
--**********************************************************************

clcrdot11aBeaconEnabled OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "This object specifies that LWAPP APs would
                broadcast radio measurement request messages
                that include a beacon measurement request
                information element on 802.11a radio to 
                clients compatible to CCX versions 2 and above.
                This configuration takes higher precedence 
                than that on the radio interface of the 
                particular AP when clcrAPIfOverrideGlobal 
                is set to 'false'.
                A value of 'true' indicates that the radio 
                measurement request on 802.11a would include a 
                beacon measurement requesst Information Element.
                A value of 'False' indicates that the radio
                measurement request on 802.11a would not include a 
                beacon measurement request Information Element."
        DEFVAL { false }
        ::= {clcrDot11aConfigGlobal 1} 
   
clcrdot11aBeaconInterval OBJECT-TYPE
        SYNTAX     TimeInterval (6000..3240000)
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     deprecated
        DESCRIPTION
                "This object specifies the interval in 
                hundredths of a second, in  which the AP issues
                radio measurement request message to client
                periodically for every SSID. 

                This configuration takes higher precedence than
                that on the radio interface of the particular AP
                when clcrAPIfOverrideGlobal is set to 'false'. 
                clcrdot11aBeaconInterval object is superseded by 
                clcrdot11aBeaconIntvl."
        DEFVAL { 6000 }
        ::= {clcrDot11aConfigGlobal 2} 

clcrdot11aBeaconIntvl OBJECT-TYPE
        SYNTAX     TimeInterval
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "This object specifies the interval in
                hundredths of a second, in 
                which the AP issues radio measurement request 
                message to client periodically for every SSID. 

                This configuration takes higher precedence than
                that on the radio interface of the particular AP
                when clcrAPIfOverrideGlobal is set to 'false'. "
        ::= {clcrDot11aConfigGlobal 3} 
   
--**********************************************************************   
-- Client Measurement request per 802.11b network
--**********************************************************************   

clcrdot11bBeaconEnabled OBJECT-TYPE
        SYNTAX     TruthValue 
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "This object specifies that LWAPP APs broadcast radio
                measurement request messages that include a
                beacon measurement request information element,
                on 802.11b/802.11g radio to clients compatible to
                CCX versions 2 and above.  This configuration
                takes higher precedence than that on the radio
                interface of the particular AP when 
                clcrAPIfOverrideGlobal is set to 'false'.
                
                A value of 'true' indicates that radio measurement
                requests on 802.11b/g will have a beacon 
                measurement request Information Element.
                
                A value of 'false' indicates that radio measurement
                requests on 802.11b/g will not have a beacon 
                measurement request Information Element."
              
        DEFVAL { false }
        ::= {clcrDot11bConfigGlobal 1} 
   
clcrdot11bBeaconInterval OBJECT-TYPE
        SYNTAX     TimeInterval (6000..3240000)
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     deprecated
        DESCRIPTION
                "This object specifies interval in hundredths
                of a second, at which the AP issues radio 
                measurement request message to client 
                periodically for every SSID.
 
                This configuration takes higher precedence than
                that on the radio interface of the particular AP
                when clcrAPIfOverrideGlobal is set to 'false'. 
                clcrdot11bBeaconInterval object is superseded by 
                clcrdot11bBeaconIntvl."
        DEFVAL { 6000 }
        ::= {clcrDot11bConfigGlobal 2}
 
clcrdot11bBeaconIntvl OBJECT-TYPE
        SYNTAX     TimeInterval 
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "This object specifies the interval 
                in hundredths of a second, at which the 
                AP issues radio measurement request 
                message to client periodically for every SSID.
 
                This configuration takes higher precedence than
                that on the radio interface of the particular AP
                when clcrAPIfOverrideGlobal is set to 'false'. "
        ::= {clcrDot11bConfigGlobal 3} 
--**********************************************************************
-- Ccx configuration on Cisco AP Radio . 
--**********************************************************************
     
clcrAPIfTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF ClcrAPIfEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "This table represents the CCX related parameters on
                the radio interface of the APs.  The values configured
                through the objects of this table are passed onto the
                AP by the controller, when the AP joins the 
                controller. 

                There exists a row in this table for each conceptual row
                in cLApDot11IfTable that represents a dot11 interface
                of an AP. "
        ::= { clcrApIfConfig 1 }
    
clcrAPIfEntry OBJECT-TYPE
        SYNTAX     ClcrAPIfEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Each entry represents a conceptual row in this table.
                An entry corresponding to each dot11 interface of an
                AP is added to this table when the AP joins the
                controller and deleted when AP disassociates from the
                controller. "
-- The following was converted from AUGMENTS to INDEX to separate
-- implementation and does not have any external impact
-- to users of MIB. The version available at mib-police page
-- will be shipped to the customers. This version is for
-- INTERNAL USE ONLY.
--      AUGMENTS { cLApDot11IfEntry } 
        INDEX { cLApSysMacAddress,
                cLApDot11IfSlotId }
        ::= { clcrAPIfTable 1 }

ClcrAPIfEntry ::=
        SEQUENCE {
                clcrAPIfOverrideGlobal  TruthValue, 
                clcrAPIfBeaconEnabled   TruthValue,
                clcrAPIfBeaconInterval  TimeInterval,
                clcrAPIfBeaconIntvl     TimeInterval
        }

clcrAPIfOverrideGlobal OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                " This object specifies the Global override option for
                beacon measurement requests.
                - A value of 'true' indicates that  values populated
                through clcrAPIfBeaconEnabled and
                clcrAPIfBeaconInterval are considered for sending
                beacon measurement requests.

                - A value of 'false' indicates that the values 
                configured through the objects 
                clcrdot11bBeaconEnabled, clcrdot11aBeaconEnabled,
                clcrdot11bBeaconInterval and clcrdot11aBeaconInterval
                take precedence and are used for sending beacon
                measurement requests. "
        DEFVAL { false }
        ::= { clcrAPIfEntry 1 }

clcrAPIfBeaconEnabled OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-write
        STATUS     current    
        DESCRIPTION
                "This object specifies the option to enable or disable
                the beacon measurement request info IE.
                - A value of 'true' indicate that the 
                LWAPP APs broadcast radio measurement request
                messages that include a beacon measurement 
                request information element to clients 
                compatible with CCX versions 2 and
                above.

                - A value of false indicates that the global
                configuration at network level takes
                higher precedence if clcrAPIfOverrideGlobal is
                set to 'false'.  Radio measurement frames include 
                a beacon request information element for every
                channel over which the measurement needs
                to be performed.  The measurement requests are
                repeated at every interval configured through
                clcrAPIfBeaconInterval. "
        DEFVAL { false }
        ::= { clcrAPIfEntry 2 }

clcrAPIfBeaconInterval OBJECT-TYPE
        SYNTAX     TimeInterval (6000..3240000)
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     deprecated
        DESCRIPTION
                "This object specifies the interval at which 
                the AP sends radio measurement
                request messages to the clients associated through
                each and every SSID. 
                clcrAPIfBeaconInterval object is superseded by 
                clcrAPIfBeaconIntvl."
        DEFVAL { 6000 }
        ::= { clcrAPIfEntry 3 }

clcrAPIfBeaconIntvl OBJECT-TYPE
        SYNTAX     TimeInterval
        UNITS      "hundredths-seconds"
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION
                "This object specifies the interval at which 
                the AP sends radio measurement request messages 
                to the clients associated through
                each and every SSID. "
        ::= { clcrAPIfEntry 4 }
   
--**********************************************************************
-- * Beacon report from the CCX clients
--**********************************************************************

clcrClientBeaconReportTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF ClcrClientBeaconReportEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "This table represents the received signal power as seen 
                by a wireless client when conducting radio
                measurements.  Clients measure the received signal
                power by observing the beacon requests and probe
                response messages on all the specified channels and
                pass them to the APs through beacon reports.

                An entry is added to the table by the agent when the
                beacon report sent by the client arrives at the dot11
                interface of an AP.  An existing entry for a client
                gets over-written when the subsequent reports arrive
                at an AP from that client.  The term 'client' here
                refers to all the wireless CCX compliant devices like
                mobile stations, tags etc.

                An entry is deleted from this table when the particular
                client dissociates from the AP.  The entry also gets
                deleted when the AP dissociates from the controller. "
        ::= { clcrClientMeasurementReport 1}

clcrClientBeaconReportEntry OBJECT-TYPE
        SYNTAX     ClcrClientBeaconReportEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Each entry represents a conceptual row in this table
                and populates the received signal power as observed
                and reported by the respective client. "
        INDEX   { clcrClientMacAddress, 
                  cLApSysMacAddress, 
                  cLApDot11IfSlotId }
        ::=     { clcrClientBeaconReportTable 1 }
    
ClcrClientBeaconReportEntry ::= 
        SEQUENCE {
                clcrClientMacAddress    MacAddress,
                clcrClientRxPowerSignal Integer32,
                clcrClientTimeStamp     TimeStamp
        }

clcrClientMacAddress OBJECT-TYPE
        SYNTAX     MacAddress
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                 "This object represents MAC address of a 
                 client that has sent a beacon report to the
                 AP. "
        ::= { clcrClientBeaconReportEntry 1 }
         
clcrClientRxPowerSignal OBJECT-TYPE
        SYNTAX     Integer32 (-90..30)
        UNITS      "dBm"         
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object represents the signal strength of the
                beacon or probe response frame as seen by the
                client. "
        ::= { clcrClientBeaconReportEntry 2 }
          
clcrClientTimeStamp OBJECT-TYPE
        SYNTAX     TimeStamp
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object represents the value of sysUpTime at
                which the beacon measurement report was 
                received. "
        ::= { clcrClientBeaconReportEntry 3 }

--**********************************************************************
-- Table to represent CISCO CCX parameters
-- per each WLAN. 
--**********************************************************************

clcrWlanTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF ClcrWlanEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "This table represents the CCX parameters of a
                particular WLAN.

                There exist a row in this table corresponding to each
                row representing a WLAN in cLWlanConfigTable. "
        ::= { clcrWlanConfig 1 }

clcrWlanEntry OBJECT-TYPE
        SYNTAX     ClcrWlanEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
                "Each entry represents a conceptual row in this table
                and provides information about the CCX capabilities
                of the WLAN. "
-- The following was converted from AUGMENTS to INDEX to separate
-- implementation and does not have any external impact
-- to users of MIB. The version available at mib-police page
-- will be shipped to the customers. This version is for
-- INTERNAL USE ONLY.
--      AUGMENTS {cLWlanConfigEntry }
        INDEX { cLWlanIndex }
        ::= { clcrWlanTable 1 }

ClcrWlanEntry ::=
        SEQUENCE {
                clcrVersionIESupport  TruthValue,
                clcrAironetIESupport  TruthValue
        }

clcrVersionIESupport OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
                "This object indicates the support for the Cisco
                Compatible Extensions Version information element
                on this WLAN.

                A value of 'true' indicates the presence of the
                support.
                A value of  'false' indicates the absence of the
                same."
        ::= { clcrWlanEntry 1 }

clcrAironetIESupport OBJECT-TYPE
         SYNTAX     TruthValue
         MAX-ACCESS read-write
         STATUS     current
         DESCRIPTION
                 "This object indicates the support for the Cisco
                 Compatible Extensions Aironet information element
                 on this WLAN. 
                 - A value of 'true' indicates that Cisco
                   Compatible Extensions Aironet information element
                   is supported on the WLAN.
                 - A value of 'false' indicates that  Cisco
                   Compatible Extensions Aironet information element
                   is not supported on the WLAN."
         DEFVAL { false }
         ::= { clcrWlanEntry 2 }

--**********************************************************************
--*    Compliance statements  
--**********************************************************************

ciscoLwappCcxRmMIBCompliances OBJECT IDENTIFIER
        ::= { ciscoLwappCcxRmMIBConform 1 }

ciscoLwappCcxRmMIBGroups OBJECT IDENTIFIER
        ::= { ciscoLwappCcxRmMIBConform 2 }

ciscoLwappCcxRmMIBCompliance MODULE-COMPLIANCE
        STATUS     deprecated 
        DESCRIPTION
                "The compliance statement for the SNMP entities that
                implement the ciscoLwappCcxRmMIB module."
        MODULE      -- this module
        MANDATORY-GROUPS {
                ciscoLwappCcxRmDot11aConfigGroup,
                ciscoLwappCcxRmDot11bConfigGroup,
                ciscoLwappCcxRmApIfConfigGroup,
                ciscoLwappCcxRmBeaconReportGroup,
                ciscoLwappCcxRmD11WlanConfigGroup
        }
        ::= { ciscoLwappCcxRmMIBCompliances 1 }

ciscoLwappCcxRmMIBComplianceVer1 MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "The compliance statement for the SNMP entities that
        implement the ciscoLwappCcxRmMIB module."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappCcxRmDot11aConfigGroupVer1,
                        ciscoLwappCcxRmDot11bConfigGroupVer1,
                        ciscoLwappCcxRmApIfConfigGroupVer1,
                        ciscoLwappCcxRmBeaconReportGroup,
                        ciscoLwappCcxRmD11WlanConfigGroup
                    }
    ::= { ciscoLwappCcxRmMIBCompliances 2 }

--**********************************************************************
--*    Units of conformance  
--**********************************************************************

ciscoLwappCcxRmDot11aConfigGroup OBJECT-GROUP
        OBJECTS {
                clcrdot11aBeaconEnabled,
                clcrdot11aBeaconInterval
        }                
        STATUS  deprecated
        DESCRIPTION
                "This collection of objects represent the beacon
                request and beacon interval parameters for 802.11a
                networks.
                ciscoLwappCcxRmDot11aConfigGroup object is superseded by 
                ciscoLwappCcxRmDot11aConfigGroupVer1."
        ::= { ciscoLwappCcxRmMIBGroups 1 }
  
ciscoLwappCcxRmDot11bConfigGroup OBJECT-GROUP
        OBJECTS {
                clcrdot11bBeaconEnabled,
                clcrdot11bBeaconInterval
        }                
        STATUS     deprecated
        DESCRIPTION
                "This collection of objects represent the beacon
                request and beacon interval parameters for 802.11a
                networks.
                ciscoLwappCcxRmDot11bConfigGroup object is superseded by 
                ciscoLwappCcxRmDot11bConfigGroupVer1."
        ::= { ciscoLwappCcxRmMIBGroups 2 }
  
ciscoLwappCcxRmApIfConfigGroup OBJECT-GROUP
        OBJECTS {
                clcrAPIfOverrideGlobal,
                clcrAPIfBeaconEnabled,
                clcrAPIfBeaconInterval
        }                
        STATUS  deprecated
        DESCRIPTION
                "This collection of objects represent the beacon
                request and beacon interval parameters for the
                respective 802.11 radio interfaces. 
                ciscoLwappCcxRmApIfConfigGroup object is superseded by 
                ciscoLwappCcxRmApIfConfigGroupVer1."
        ::= { ciscoLwappCcxRmMIBGroups 3 }

ciscoLwappCcxRmBeaconReportGroup OBJECT-GROUP
        OBJECTS {
                clcrClientRxPowerSignal,
                clcrClientTimeStamp
        }
        STATUS     current
        DESCRIPTION
                "This collection of objects represent information
                about the beacon reports received from CCX 
                clients. "
        ::= { ciscoLwappCcxRmMIBGroups 4 }
           
ciscoLwappCcxRmD11WlanConfigGroup OBJECT-GROUP
        OBJECTS {
                clcrVersionIESupport,
                clcrAironetIESupport
        }                
        STATUS     current
        DESCRIPTION
                "This collection of objects represent the CCX 
                settings on a particular WLAN. "
              ::= { ciscoLwappCcxRmMIBGroups 5 }

ciscoLwappCcxRmDot11aConfigGroupVer1 OBJECT-GROUP
    OBJECTS         {
                        clcrdot11aBeaconEnabled,
                        clcrdot11aBeaconIntvl
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the beacon
        request and beacon interval parameters for 802.11a
        networks."
    ::= { ciscoLwappCcxRmMIBGroups 6 }

ciscoLwappCcxRmDot11bConfigGroupVer1 OBJECT-GROUP
    OBJECTS         {
                        clcrdot11bBeaconEnabled,
                        clcrdot11bBeaconIntvl
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the beacon
        request and beacon interval parameters for 802.11b
        networks."
    ::= { ciscoLwappCcxRmMIBGroups 7 }

ciscoLwappCcxRmApIfConfigGroupVer1 OBJECT-GROUP
    OBJECTS         {
                        clcrAPIfOverrideGlobal,
                        clcrAPIfBeaconEnabled,
                        clcrAPIfBeaconIntvl
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represent the beacon
        request and beacon interval parameters for the
        respective 802.11 radio interfaces."
    ::= { ciscoLwappCcxRmMIBGroups 8 }

END

