ALCATEL-ENT1-LBD-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                Unsigned32, Counter32, MODULE-IDENTITY,
                NOTIFICATION-TYPE, OBJECT-TYPE,
                OBJECT-IDENTITY, Integer32         
                    FROM SNMPv2-SMI
                MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
                                        FROM SNMPv2-CONF
                InterfaceIndex          FROM IF-MIB
                SnmpAdminString         FROM SNMP-FRAMEWORK-MIB
                RowStatus, MacAddress, TEXTUAL-CONVENTION        FROM SNMPv2-TC

                softentIND1Lbd 
                            FROM ALCATEL-ENT1-BASE;


                alcatelIND1LBDMIB MODULE-IDENTITY
                LAST-UPDATED "200812100000Z"
                ORGANIZATION "Alcatel - Architects Of An Internet World"
                CONTACT-INFO
                "Please consult with Customer Service to insure the most appropriate
                version of this document is used with the products in question:

                        Alcatel Internetworking, Incorporated
                        (Division 1, Formerly XYLAN Corporation)
                        26801 West Agoura Road
                        Agoura Hills, CA  91301-5122
                        United States Of America

                        Telephone:      North America  +1 800 995 2696
                                        Latin America  +1 877 919 9526
                                        Europe         +31 23 556 0100
                                        Asia           +65 394 7933
                                        All Other      +1 818 878 4507

                Electronic Mail:         support@ind.alcatel.com
                World Wide Web:          http://www.ind.alcatel.com
                File Transfer Protocol:  ftp://ftp.ind.alcatel.com/pub/products/mibs"

                DESCRIPTION
                        "This module describes an authoritative enterprise-specific Simple
                        Network Management Protocol (SNMP) Management Information Base (MIB):

                        For the Birds Of Prey Product Line
                        LBD for detection loopback.

                        The right to make changes in specification and other information
                        contained in this document without prior notice is reserved.

                        No liability shall be assumed for any incidental, indirect, special, or
                        consequential damages whatsoever arising from or related to this
                        document or the information contained herein.

                        Vendors, end-users, and other interested parties are granted
                        non-exclusive license to use this specification in connection with
                        management of the products for which it is intended to be used.

                        Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
                        ALL RIGHTS RESERVED WORLDWIDE"

                REVISION      "200812100000Z"
                DESCRIPTION
                    "The LBD mib defines a set of LBD related management objects for ports
            that support Loop Back Detection(LBD) mechanism. 
            LBD mechanism monitors the physical configuration of cables and detect when 
            a loopback detection exists due to any physical or logical problem. In case 
            such problem, it shall take appropriate measures for the port based upon the 
            configured mode of operation and raise a trap to the user."
                ::= { softentIND1Lbd 1}

-- --------------------------------------------------------------
alaLbdTraps  OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Branch For Loopback-Detection Subsystem MIB Notifications."
    ::= { alcatelIND1LBDMIB 0 }

alcatelIND1LBDMIBObjects OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Branch For Loopback-Detection Subsystem Managed Objects."
    ::= { alcatelIND1LBDMIB 1 }
    
alcatelIND1LBDMIBConformance OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Branch for LBD Module MIB Subsystem Conformance Information."
    ::= { alcatelIND1LBDMIB 2 }

alcatelIND1LBDMIBGroups OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
        "Branch for LBD Module MIB Subsystem Units of Conformance."
    ::= { alcatelIND1LBDMIBConformance 1 }  

alcatelIND1LBDMIBCompliances OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
         "Branch for LBD Module MIB Subsystem Compliance Statements."
     ::= { alcatelIND1LBDMIBConformance 2 }

-- --------------------------------------------------------------
-- Texual Convention
-- --------------------------------------------------------------

AlaLbdPortConfigLbdOperStatus ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION 
        "Specifies the current operational state of this port."
    SYNTAX  INTEGER {
            inactive (0),  -- Specifies that the operational state is inactive.
            normal (1),    -- Specifies that the operational state is normal.
            shutdown (2),  -- Specifies that the port is shutdown in state.
            remoteShutdown (3)   -- Specifies that the port is shutdown due to remote violation.
    }

AlaLbdCurrentStateCVAorAR ::= TEXTUAL-CONVENTION
    STATUS  current
    DESCRIPTION
        "Specifies the state of the port, where LBD was running, after
            auto-recovery or issuing clear-violation-all."
    SYNTAX  INTEGER {
         inactive (0), -- Specifies that the operational state is inactive.     
         normal (1)    -- Specifies that the state is normal.
    }
    
-- --------------------------------------------------------------
-- Global LBD Objects
-- LBD - Loop Back Detection
-- --------------------------------------------------------------

alaLbdGlobalConfigStatus      OBJECT-TYPE
    SYNTAX          INTEGER {
                enable(1),
                disable(2)
                }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable or disable LBD on the
        switch. The value enable (1) indicates that LBD should be
        enabled on the switch. The value disable (2) is used to
        disable LBD on the switch."
    DEFVAL  { disable }
    ::= { alcatelIND1LBDMIBObjects 1 }

alaLbdGlobalConfigTransmissionTimer     OBJECT-TYPE
    SYNTAX  Unsigned32 ( 5 .. 600 )
    UNITS   "seconds"
    MAX-ACCESS      read-write
    STATUS  current
    DESCRIPTION
        "This object is used to set the transmission timer for LBD
        feature for PORT globally. It is allowed to modify the timer at any
        instance but the new timer value will be effective from next
        time the timer restarts."
    DEFVAL  { 30 }
    ::= { alcatelIND1LBDMIBObjects 2 }

alaLbdGlobalClearPortStat OBJECT-TYPE
    SYNTAX  INTEGER {
                default(0),
                reset(1)
    }
    MAX-ACCESS      read-write
    STATUS  current
    DESCRIPTION
        "Defines the global clear statistics control for port for
        LBD.
        default(0) - default value for this object,
        reset(1)   - indicates that LBD should clear all statistic
        counters related to all ports in the system."
    DEFVAL  { default }
    ::= { alcatelIND1LBDMIBObjects 3 }

alaLbdGlobalConfigAutorecoveryTimer OBJECT-TYPE
    SYNTAX  Unsigned32 ( 0 .. 86400 )
    UNITS   "seconds"
    MAX-ACCESS      read-write
    STATUS  current
    DESCRIPTION
        "This object is used to make up all the disabled ports which
        was caused due to loop-back detection. Auto recovery can be disabled by
        Setting this value to 0 sec" 
    DEFVAL { 300 }
    ::= { alcatelIND1LBDMIBObjects 4 }
        
-- -------------------------------------------------------------
-- LBD Config Table on Physical Port 
-- -------------------------------------------------------------
    
alaLbdPortConfig  OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 5 }

alaLbdPortConfigTable  OBJECT-TYPE
    SYNTAX                SEQUENCE OF AlaLbdPortConfigEntry
    MAX-ACCESS            not-accessible
    STATUS                current
    DESCRIPTION
        "A table containing LBD user port configuration information."
    ::= { alaLbdPortConfig 1 }

alaLbdPortConfigEntry  OBJECT-TYPE
    SYNTAX                AlaLbdPortConfigEntry 
    MAX-ACCESS            not-accessible
    STATUS                current
    DESCRIPTION
        "A LBD user port configuration entry."
    INDEX { alaLbdPortConfigIfIndex }
    ::= { alaLbdPortConfigTable 1 }

AlaLbdPortConfigEntry ::= SEQUENCE {
    alaLbdPortConfigIfIndex              InterfaceIndex,
    alaLbdPortConfigLbdAdminStatus       INTEGER,
    alaLbdPortConfigLbdOperStatus        AlaLbdPortConfigLbdOperStatus,
    alaLbdPortConfigServiceAccessType    INTEGER,
    alaLbdPortAFDConfig                  INTEGER,
    alaLbdPortRemoteConfigAdminStatus    INTEGER,
    alaLbdPortRemoteSrcMacAddr           MacAddress,
    alaLbdPortRemoteBridgeID             MacAddress
}

alaLbdPortConfigIfIndex       OBJECT-TYPE
    SYNTAX  InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The physical identification number for this port."
    ::= { alaLbdPortConfigEntry 1 }

alaLbdPortConfigLbdAdminStatus OBJECT-TYPE
    SYNTAX          INTEGER {
            enable(1),
            disable(2)
    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable or disable loopback-detection per port. 
        The value enable(1) indicates that loopback-detection is 
        enabled on this port. The value disable(2) indicates that 
        loopback-detection is disabled on this port.
        The LBD configuration per port can be applied and retained, 
        irrespective of value of alaLbdGlobalConfigStatus, but the same shall 
        be functionally unavailable when alaLbdGlobalConfigStatus is set to
        disable(2)."
    DEFVAL  { disable }
    ::= { alaLbdPortConfigEntry 2 }

alaLbdPortConfigLbdOperStatus OBJECT-TYPE
    SYNTAX          AlaLbdPortConfigLbdOperStatus
    MAX-ACCESS     read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the current operational state of the 
        corresponding port."
    ::= { alaLbdPortConfigEntry 3 }

alaLbdPortConfigServiceAccessType OBJECT-TYPE
    SYNTAX          INTEGER {
            normalEdge(1),
            serviceEdge(2),
            noValue(3)
    }
    MAX-ACCESS     read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the type of service access port.
        port."
    DEFVAL { noValue }
    ::= { alaLbdPortConfigEntry 4 }

alaLbdPortAFDConfig OBJECT-TYPE
    SYNTAX          INTEGER {
        admin(1),
        autoFarbic(2)
    }
    MAX-ACCESS     read-only
    STATUS          current
    DESCRIPTION
    "Configuration is made by admin or auto-fabric on
    this interface"
    DEFVAL { admin }
    ::= { alaLbdPortConfigEntry 5 }

alaLbdPortRemoteConfigAdminStatus OBJECT-TYPE
    SYNTAX          INTEGER {
            enable(1),
            disable(2)
    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable or disable remote-origin
        loopback-detection per port. 
        The value enable(1) indicates that remote loopback-detection
        is enabled on this port. 
        The value disable(2) indicates that remote  
        loopback-detection is disabled on this port."
    DEFVAL  { disable }
    ::= { alaLbdPortConfigEntry 6 }

alaLbdPortRemoteSrcMacAddr   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object denotes the remote source mac address which gets
         populated during lbd shutdown due to remote violation."
    ::= { alaLbdPortConfigEntry 7 }

alaLbdPortRemoteBridgeID   OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object denotes the remote bridgeId which gets
         populated during lbd shutdown due to remote violation."
    ::= { alaLbdPortConfigEntry 8 }

-- --------------------------------------------------------------
-- Loop Back Detection Statistics Table
-- -- --------------------------------------------------------------
alaLbdPortStat OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 6 }

alaLbdPortStatsTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AlaLbdPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table containing Loop Back Detection information."
    ::= { alaLbdPortStat 1 }

alaLbdPortStatsEntry  OBJECT-TYPE
    SYNTAX  AlaLbdPortStatsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A LBD Statistics entry on per port."
    INDEX { alaLbdPortStatsIfIndex }
    ::= { alaLbdPortStatsTable 1 }

AlaLbdPortStatsEntry ::= SEQUENCE {
    alaLbdPortStatsIfIndex            InterfaceIndex,
    alaLbdPortNumLbdInvalidRcvd       Counter32,
    alaLbdPortLbdSent                 Counter32,
    alaLbdPortStatsClear              INTEGER,
    alaLbdPortLinkAgg                 Integer32
}

alaLbdPortStatsIfIndex OBJECT-TYPE
    SYNTAX  InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The ifindex of the port on which LBD is running."
    ::= { alaLbdPortStatsEntry 1 }

alaLbdPortNumLbdInvalidRcvd OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of Invalid packets received by a port."
    ::= { alaLbdPortStatsEntry 2 }

alaLbdPortLbdSent OBJECT-TYPE
    SYNTAX Counter32
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Number of LBD packets sent by a port."
    ::= { alaLbdPortStatsEntry 3 }

alaLbdPortStatsClear OBJECT-TYPE
    SYNTAX INTEGER {
        default(0),
            reset(1)
    } 
    MAX-ACCESS  read-write
    STATUS  current
    DESCRIPTION
        "When this object is set to reset(1), all statistics parameters 
        corresponding to this port gets cleared (reset)." 
    DEFVAL  { default }
    ::= { alaLbdPortStatsEntry 4 }

alaLbdPortLinkAgg OBJECT-TYPE
    SYNTAX Integer32 (-1..255)
    MAX-ACCESS  read-only
    STATUS  current
    DESCRIPTION
        "Indicates whether the port is part of link aggregates. If it is then 
        it shows the link aggregate id. If it is not then it shows -1"
    ::= { alaLbdPortStatsEntry 5 }

-- --------------------------------------------------------------
-- Trap Description 
-- --------------------------------------------------------------

--alaLbdTraps    OBJECT IDENTIFIER ::= { alcatelIND1LBDMIB 0 }
--alaLbdTrapsDesc  OBJECT IDENTIFIER ::= { alaLbdTraps 1 }
--alaLbdTrapsRoot OBJECT IDENTIFIER ::= { alaLbdTrapsDesc  0 }

alaLbdTrapsObj OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 7 }

alaLbdStateChangeToShutdown NOTIFICATION-TYPE
    OBJECTS  {
        alaLbdPortIfIndex,
        alaLbdPreviousState,
        alaLbdCurrentState,
        alaLbdPortRemoteSrcMacAddr,
        alaLbdPortRemoteBridgeID
    }
    STATUS   current
    DESCRIPTION
        "When the port state becomes shutdown, a notification is sent
        to the Management Entity with the LBD-state
        information."
    ::= { alaLbdTraps 1 }

alaLbdStateChangeForClearViolationAll NOTIFICATION-TYPE
    OBJECTS  {
        alaLbdPortIfIndex,
        alaLbdPreviousStateClearViolationAll,
        alaLbdCurrentStateClearViolationAll
    }             
    STATUS   current
    DESCRIPTION
        "When the the port state changes from shutdown due to 
        clear-violation-all, a notification is sent to the Management 
        Entity, with the LBD-state information."
    ::= { alaLbdTraps 2 }

alaLbdStateChangeForAutoRecovery NOTIFICATION-TYPE
    OBJECTS  {
        alaLbdPortIfIndex,
        alaLbdPreviousStateAutoRecovery,
        alaLbdCurrentStateAutoRecovery
    }
    STATUS   current
    DESCRIPTION
        "When the port state changes from shutdown due to auto-recovery
        mechanism, a notification is sent to the Management Entity
        with the LBD-state information."
    ::= { alaLbdTraps 3 }

-- ----------------------------------------------------------------------
-- Trap Objects
-- -- ----------------------------------------------------------------------
alaLbdPortIfIndex  OBJECT-TYPE
    SYNTAX  InterfaceIndex
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The ifIndex of the port on which LBD trap is raised"
    ::= { alaLbdTrapsObj 1 }

alaLbdPreviousState OBJECT-TYPE
    SYNTAX  INTEGER {
        normal(1)   --  Specifies that the operational state is normal.
    }
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
        "The previous state of the port on which LBD was running."
    ::= { alaLbdTrapsObj 2 }

alaLbdCurrentState OBJECT-TYPE
    SYNTAX  INTEGER {
        shutdown (1),      -- State is shutdown
        remoteShutdown (2)      -- State is shutdown due to remote violation
    }
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The current state of the port on which LBD was running."
    ::= { alaLbdTrapsObj 3 }

alaLbdPreviousStateClearViolationAll OBJECT-TYPE  
    SYNTAX  INTEGER {
        shutdown (1)       -- State is shutdown 
    }
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The state of the the port where LBD was running 
    before clear-violation-all applied."
    ::= { alaLbdTrapsObj 4 }

alaLbdCurrentStateClearViolationAll OBJECT-TYPE
    SYNTAX  AlaLbdCurrentStateCVAorAR
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The state of the the port where LBD was running
    after clear-violation-all applied."
    ::= { alaLbdTrapsObj 5 }

alaLbdPreviousStateAutoRecovery OBJECT-TYPE
    SYNTAX  INTEGER {
        shutdown (1)       -- State is shutdown
    }
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The state of the the port where LBD was running
    before auto-recovery."
    ::= { alaLbdTrapsObj 6 }

alaLbdCurrentStateAutoRecovery OBJECT-TYPE
    SYNTAX  AlaLbdCurrentStateCVAorAR
    MAX-ACCESS  accessible-for-notify
    STATUS  current
    DESCRIPTION
    "The state of the the port where LBD was running
    after auto-recovery."
    ::= { alaLbdTrapsObj 7 }

-- ------------------------------------------------------------
-- Objects required for Auto Fabric support
-- ------------------------------------------------------------
alaLbdGlobalStatusAFDConfig OBJECT-TYPE
    SYNTAX  INTEGER {
        admin(1),
        autoFabric(2)
    }
    MAX-ACCESS      read-only
    STATUS  current
    DESCRIPTION
    "Global Enable of LBD is done by admin or auto-fabric"
    DEFVAL  { admin }
    ::= { alcatelIND1LBDMIBObjects 8 }

alaLbdVlanGlobalConfigTransmissionTimer     OBJECT-TYPE   
    SYNTAX  Unsigned32 ( 1 .. 600 )   
    UNITS   "seconds"   
    MAX-ACCESS      read-write   
    STATUS  current   
    DESCRIPTION   
        "This object is used to set the transmission timer for LBD   
        feature for VLAN globally. It is allowed to modify the timer at any   
        instance but the new timer value will be effective   
        from next time the timer restarts."   
    DEFVAL  { 1 }   
    ::= { alcatelIND1LBDMIBObjects 9 }   

alaLbdVlanConfigLbdAdminStatus OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2)
    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable or disable loopback-detection Vlan. 
        The value enable(1) indicates that loopback-detection is 
        enabled on this vlan. The value disable(2) indicates that 
        loopback-detection is disabled on this vlan."
    DEFVAL  { disable }
    ::= { alcatelIND1LBDMIBObjects 10 }

alaLbdVlanConfigAllVlan OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used to enable or disable loopback-detection on all Vlans.    
        The value enable(1) indicates that loopback-detection is    
        enabled on on all vlans. The value disable(2) indicates that    
        loopback-detection is disabled on all vlans."   
    DEFVAL  { disable }
    ::= { alcatelIND1LBDMIBObjects 11 }

-- -------------------------------------------------------------
-- LBD Vlan Config
-- -------------------------------------------------------------

alaLbdVlanConfig  OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 12 }

alaLbdVlanTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF  AlaLbdVlanEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    "A table that contains the LBD Vlan configuration Information" 
    ::= { alaLbdVlanConfig 1 }

alaLbdVlanEntry  OBJECT-TYPE
    SYNTAX  AlaLbdVlanEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    ""
    INDEX   { alaLbdVlanId }
    ::= { alaLbdVlanTable 1 }

AlaLbdVlanEntry ::=   SEQUENCE  {
    alaLbdVlanId       Unsigned32,
    alaLbdVlanStatus   RowStatus
}

alaLbdVlanId  OBJECT-TYPE
    SYNTAX  Unsigned32 ( 1 .. 4094 )
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "This object is the VLAN ID that is enabled LBD."
    ::= { alaLbdVlanEntry 1 }

alaLbdVlanStatus OBJECT-TYPE
    SYNTAX  RowStatus
    MAX-ACCESS  read-create
    STATUS  current
    DESCRIPTION
        "The status of this table entry.  The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove VLAN/VLANS to/from LBD."
    ::= { alaLbdVlanEntry 2 }

-- -------------------------------------------------------------
-- LBD VLAN Violation Statistics
-- -------------------------------------------------------------

alaLbdVlanViolationStatistics OBJECT IDENTIFIER ::= { alcatelIND1LBDMIBObjects 13 }

alaLbdVlanViolationStatisticsTable OBJECT-TYPE
    SYNTAX SEQUENCE OF  AlaLbdVlanViolationStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "A table that contains the violation of the Port/Linkagg 
        and the vlan on which it got violated"
    ::= {  alaLbdVlanViolationStatistics 1 }

alaLbdVlanViolationStatisticsEntry OBJECT-TYPE
    SYNTAX AlaLbdVlanViolationStatisticsEntry
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
    ""
    INDEX { alaLbdVlanIfindex }
    ::= { alaLbdVlanViolationStatisticsTable 1 }

AlaLbdVlanViolationStatisticsEntry ::= SEQUENCE {
    alaLbdVlanIfindex           Unsigned32,
    alaLbdViolatedVlanId        Integer32
}

alaLbdVlanIfindex OBJECT-TYPE
    SYNTAX  Unsigned32 (1001..4294967295)
    MAX-ACCESS  not-accessible
    STATUS  current
    DESCRIPTION
        "The ifIndex component of this instance."
    ::= {alaLbdVlanViolationStatisticsEntry 1 }

alaLbdViolatedVlanId OBJECT-TYPE
    SYNTAX Integer32 (1..4094)
    MAX-ACCESS read-only
    STATUS  current
    DESCRIPTION
        "The VlanId for which the current instance is in violation"
    ::= {alaLbdVlanViolationStatisticsEntry 2 }

-- --------------------------------------------------------------
-- Global object required for enabling/disabling remote-origin LBD frame
-- --------------------------------------------------------------

alaLbdGlobalRemoteConfigStatus      OBJECT-TYPE
    SYNTAX          INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object is used for enabling or disabling
        the processing of LBD frames originating from a
        different system (non local origin).
        On enable   : The switch processes LBD frames 
        originating from different switch.
        On disable  : The switch drops/ignores remote-origin
        LBD packet and counts as an invalid frame"
    DEFVAL  { disable }
    ::= { alcatelIND1LBDMIBObjects 14 }

-- -------------------------------------------------------------
-- COMPLIANCE
-- -------------------------------------------------------------

alcatelIND1LBDMIBCompliance MODULE-COMPLIANCE
    STATUS    current
    DESCRIPTION
    "Compliance statement for LBD."
    MODULE
    MANDATORY-GROUPS  {
        alaLbdGlobalConfigGroup,
        alaLbdIntfConfigGroup,
        alaLbdPortStatusGroup,
        alaLbdStateTrapToShutdownGroup,
        alaLbdStateTrapForClearViolationAllGroup,
        alaLbdStateTrapForAutoRecoveryGroup,
        alaLbdTrapsGroup,
        alaLbdVlanConfigGroup,
        alaLbdVlanViolationStatisticsGroup
    }
    ::= { alcatelIND1LBDMIBCompliances 1 }

-- -------------------------------------------------------------
-- UNITS OF CONFORMANCE
-- -------------------------------------------------------------

alaLbdGlobalConfigGroup   OBJECT-GROUP
    OBJECTS {
        alaLbdGlobalConfigStatus,
        alaLbdGlobalConfigTransmissionTimer,
        alaLbdGlobalClearPortStat,
        alaLbdGlobalConfigAutorecoveryTimer,
        alaLbdGlobalStatusAFDConfig,
        alaLbdVlanGlobalConfigTransmissionTimer,
        alaLbdVlanConfigLbdAdminStatus,
        alaLbdVlanConfigAllVlan,
        alaLbdGlobalRemoteConfigStatus
    }
    STATUS  current
    DESCRIPTION
        "Collection of objects for management of LBD Global Configuration."
    ::= { alcatelIND1LBDMIBGroups 1 }

alaLbdIntfConfigGroup   OBJECT-GROUP
    OBJECTS {
        alaLbdPortConfigLbdAdminStatus,
        alaLbdPortConfigLbdOperStatus,
        alaLbdPortConfigServiceAccessType,
        alaLbdPortAFDConfig,
        alaLbdPortRemoteConfigAdminStatus,
        alaLbdPortRemoteSrcMacAddr,
        alaLbdPortRemoteBridgeID
    }
    STATUS  current
    DESCRIPTION
    "Collection of objects for management of LBD per port Configuration."
    ::= { alcatelIND1LBDMIBGroups 2 }

alaLbdPortStatusGroup OBJECT-GROUP
    OBJECTS {
        alaLbdPortNumLbdInvalidRcvd,
        alaLbdPortLbdSent,
        alaLbdPortStatsClear,
        alaLbdPortLinkAgg
    }
    STATUS  current
    DESCRIPTION
        "Collection of objects for LBD Statistics information."
    ::= { alcatelIND1LBDMIBGroups 3 }

alaLbdStateTrapToShutdownGroup OBJECT-GROUP
    OBJECTS  {
        alaLbdPortIfIndex,
        alaLbdPreviousState,
        alaLbdCurrentState
    }
    STATUS  current
    DESCRIPTION
        "Collection of objects for LBD State change to shutdown Traps ."
    ::= { alcatelIND1LBDMIBGroups 4 }

alaLbdStateTrapForClearViolationAllGroup OBJECT-GROUP
    OBJECTS  {
        alaLbdPreviousStateClearViolationAll,
        alaLbdCurrentStateClearViolationAll
    }
    STATUS  current
    DESCRIPTION
        "Collection of objects for LBD State Traps due to
        issuing clear-violation-all."
    ::= { alcatelIND1LBDMIBGroups 5 }

alaLbdStateTrapForAutoRecoveryGroup OBJECT-GROUP
    OBJECTS {
        alaLbdPreviousStateAutoRecovery,
        alaLbdCurrentStateAutoRecovery
    }
    STATUS  current
    DESCRIPTION
        "Collection of objects for LBD State Traps due to
        auto-recovery mechanism."
    ::= { alcatelIND1LBDMIBGroups 6 }

alaLbdTrapsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
        alaLbdStateChangeForAutoRecovery ,    
        alaLbdStateChangeForClearViolationAll,
        alaLbdStateChangeToShutdown
    }
    STATUS  current
    DESCRIPTION
    ""
    ::= { alcatelIND1LBDMIBGroups 7 }

alaLbdVlanConfigGroup   OBJECT-GROUP
    OBJECTS {
        alaLbdVlanStatus 
    }
    STATUS  current
    DESCRIPTION
    "Collection of objects for management of LBD per port Configuration."
    ::= { alcatelIND1LBDMIBGroups 8 }

alaLbdVlanViolationStatisticsGroup OBJECT-GROUP
    OBJECTS  {
        alaLbdViolatedVlanId
    }
    STATUS  current
    DESCRIPTION
    "Collection of objects for vlan violation statistics."
    ::= { alcatelIND1LBDMIBGroups 9 }

-- -------------------------------------------------------------

END

