# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-6.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-7.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-9.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Corrective actions to fix potential background media scan issue.
        * Support firmware flash in OS FIPS enabled mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-6.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.99
changelog:
  -      Fix has been implemented to show right data in redfish, which includes to suppress additional SetObject name when adapter provides expanded data for GET operation in RDE
        * Excessive event issue is fixed when RDE and DCi coexist on the system on iLO 5 and iLO 6
        * iLO Login page shows the Server as Managed by HPE OneView when actually the Server is in Monitored mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00
changelog:
  -      OpenSSL v1.0.2 in iLO FW is patched with Extended Master Secret support for TLS1.2
        * SNMP GET, GET-NEXT and WALK support added for the following storage controllers on iLO5 
          * HPE MR216i-a Gen10 Plus 
          * HPE MR216i-p Gen10 Plus
          * HPE MR416i-a Gen10 Plus
          * HPE MR416i-p Gen10 Plus 
          * HPE SR932i-p Gen10 Plus
          * HPE SR416i-a Gen10 Plus
          * HPE NS204i-p Gen10 Plus Boot Controller
        * Updated the Eventing mechanism for State Transitions for Security Parameters for Security Dashboard
        * Redfish includes direct attach backplane in Fabric collection
        * Redfish schema amendments for DMTF compliance


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.00
changelog:
  -      Slowness due to continuously polling on timer expiry leading to increased CPU utilization
        * Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
        * Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
        * PSU firmware upgrade flashing failure for Titanium PSUs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.01
changelog:
  -      Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers
        * Implemented Reconnect button in iLO UI for enabling customers to manually reconnect to HPE GreenLake for Compute Ops Management
        * Configuration to allow disabling/enabling all weak ciphers and key lengths for SSH and TLS interfaces in Production security mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.02
changelog:
  -      Support for BlueField-3 DPU Model B3220 has been added
        * Storage Page enhanced to display storage enclosure, switch and port information in the topology


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.02
changelog:
  -      Fix for incorrect temperature sensor values and sensor indices reported by iLO SNMP interface
        * Fix for inconsistent physical drive status reported by iLO SNMP interface as compared with iLO GUI or Redfish interfaces
        * Support added for sending iLO AlertMail with TLS enabled, in conformance with RFC3207
        * Fix for configuring one time boot options via in-band and out-of-band IPMI methods
        * Fix for Web User interface being rendered inaccessible after the storage tab is clicked, in a server with large number of drives


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.35
changelog:
  -     This product addresses a issue where IGMP2 packets isn't forwarded to the host
      OS when shared NIC is enabled with HPE Ethernet 1Gb 2-port 361i Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.27.0
changelog:
  -      This product addresses an issue where Option ROM version is missing with some Intel 1GB adapters
        * This product addresses an issue where disconnection occurs after rebooting system with HPE Ethernet 1Gb 2-port 368i Adapter and HPE Ethernet 1Gb 4-port 369i Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.27.30
changelog:
  -     This product addresses an issue where NIC status(iLO page->System
      Information->Network) for HPE Ethernet 10Gb 2-port 562SFP+/562FLR-SFP+ Adapter
      is Unknown with being plugged in to a network.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.28.0
changelog:
  -     This product addresses an issue where the firmware installation exceeds the
      expected time by using Oneview to update Firmware with 568FLR-MMSFP+.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.5
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 update 4 and SUSE Linux
      Enterprise Server 15 Service Pack 3


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.50
changelog:
  -      This product addresses an issue where the incorrect translation is seen with Intel Intel I350-T4 Ethernet 1Gb 4-port BASE-T  Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.4
changelog:
  -     This product addresses an issue where the adaters isn't recongized with HPE
      Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2  Adapter and HPE Ethernet 10Gb 2-port
      SFP+ X710-DA2 Adapter


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.24.6-1.rhel9u2
changelog:
  - This driver fixes the issue of restoring all VF-d config on a VF reset.
  - This driver fixes the issue of mirror rule via VF-d.
  - This driver fixes the issue of VFD handler function prototypes.
  - This driver fixes the issue of assuming hardware is at default when that's not always true. 
  - This driver fixes the issue of not re-initializing properly in the case of CORE reset following PF reset timeout.
  - This driver fixex the issue of unknown NMI received and kernel crash when adding/removing VF to namespace repeatedly.
  - This driver fixes the issue of running 'ifconfig ethX mtu 2000' causes physial link down and failed to auto-recover, when we have set ' ethtool --set-priv-flags eth2 link-down-on-close on'.
  - This driver now introduce allow_untagged VF-d attribute.
  - This driver now add a helper function to validate a vf based on the vf id.
  - This driver now add a macro for checking if prog_attached exists.
  - This driver now add client register/unregister to prevent vsi.
  - Added RHEL7u6 Support.
  - Added SLES12SP4 Support.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.14-1
changelog:
  - This driver added the "Negotiated" string into the i40e_print_link_message() function. 
  - This driver fixes VF 0 failed opcode 3, when total cores =192( total threads =384, with Hyper threading enabled in BIOS)
  - This driver remove RDMA VF code from files including VF support.
  - This driver fixes the issue of reloading driver during resets loop causes platform to lose connection and trace call


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.16-1
changelog:
  - This driver add support to expose VF stats as part of PF interface ethtool stats.
  - This driver fix i40e Mirrors not clear after VF remove.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.10.19.81-1
changelog:
  - This driver export LPI time duration statistic info which can be observed by ethtool -S $pf
  - This driver fix an error message appeared like "0000 [#1] SMP PTI"


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.15.6
changelog:
  - Removes rx_fragments and rx_jabber from rx_errors to avoid rx_jabber and rx_fragments incorrectly double count.
  - Fixes ethtool warning message caused by incorrect data structure
  - Add RHEL8.4 Support


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 4.0.1-1
changelog:
  - Add SLES15 SP2 support
  - This driver fix system freezes when trying to create TCs on VF with no more VSIs available.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.3.5.42
changelog:
  - This driver fixes an issue of driver crash with ethtool command.
  - This driver fixes an issue of Klocwork hits.
  - Added RHEL7u6 Support.
  - Added SLES12SP4 Support.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.6.4-1
changelog:
  - This driver fixes an issue of Infinite recursion in device shutdown path due to a corner case when PCIe link was down
  - Fix the issue of typo in ethtool stats
  - Added RHEL7u7 Support.
  - Added RHEL8 Support.
  - Added SLES15SP1 Support.


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 0.13.1-1
changelog:
  - Fix return values and prints in VF MAC add/del flow
  - Fix kernel panic after transiting FW LLDP from on to off and restarting lldpad
  - Fix Throughput lower than expected.


author: HPE Linux SW Deliverables <Linux_SWdeliverables@external.groups.hpe.com> 1.6.4-1
changelog:
  - Addressing the issue of system reboot on unloading iavf driver with maxvfs enabled in switchdev mode


