# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG5-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-5.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-6.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.91
changelog:
  -     Fix provided to have synchronous messages to reflect the status, to Compute
      Ops Management, after completion of server reset during bundle update in
      COM4VC use case scenario.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.95
changelog:
  -     \- Added capability in iLO for Two Factor Authentication using OTP (One Time
      Password) for Microsoft AD users  
       \- To display drive enclosure info in Firmware tab in iLO  
       \- Support for controller which goes for functional reset runtime  
       \- iLO to mark the correct component update status for runtime agent
      updatable components based on the update status and update result  
       \- Secure erase of data based on the usecase (customer, factory or openbmc
      ownership transfer)  
       \- iLO stops the bundle update in the scenario where BootToUefi task goes to
      exception to ensure Graceful shutdown of server  
       \- iLO Support for OBSE in factory mode without the need for Advance License  
       \- Added support for comma (",") as a delimiter for multiple email IDs in
      AlertMail feature


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.95
changelog:
  -     \- OEM iLO component does not show the OEM equivalent entry for Intelligent
      Provision in One Time Boot Option  
      \- Handling delayed device discovered in UEFI mode during discovery phase  
      \- Persist the KCS interface setting across iLO reboots  
      \- Capability to enable KCS interface setting without needing a factory reset


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.96
changelog:
  -      Incorrect reporting of the firmware version of Intel NVMe drives
        * Bundle update issue in case of file download failure for HPE GreenLake Compute Ops Management
        * iLO Two-Factor authentication login fails when AD user login name is used as username for iLO Login instead of AD user display name
        * Incorrect reporting of the Nic card port status from IPMI SDR list
        * Fixing HPE GreenLake Compute Ops Management retry logic to address HPE GreenLake Compute Ops Management status was changing from Connection in progress to Connection failed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.97
changelog:
  -      iLO needs to provide IPv4 address for RDE enabled NIC
        * NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
        * High Efficiency Mode setting can be modified via iLO for DL110 Gen10 Plus server having only DC Power Supply of Spare Part Number P40359-001


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.97
changelog:
  -      Increased the maximum boot order to 512 as specified by UEFI EV specification
        * UefiDevicePath length increased from 256 bytes to 1024 bytes. 
        * Incorrect sensor values for some sub-components in IPMI response.
        * Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.98
changelog:
  -      Enhanced iLO firmware to report additional description about the component for HPE GreenLake Compute Ops Management (COM) initiated firmware bundle update
        * Added Enable/Disable of User Accounts option from Redfish and iLO GUI
        * For PLDM components, added the ability to selectively update the target devices on the system from Install sets and Update task queue


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.98
changelog:
  -      Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
        * Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.99
changelog:
  -      Fix has been implemented to show right data in redfish, which includes to suppress additional SetObject name when adapter provides expanded data for GET operation in RDE
        * Excessive event issue is fixed when RDE and DCi coexist on the system on iLO 5 and iLO 6
        * iLO Login page shows the Server as Managed by HPE OneView when actually the Server is in Monitored mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12.1
changelog:
  -      This product addresses an issue a packet missing problem after some amounts of multicast UDP streams transmitted.
        * This product addresses an issue the port identifier LED problem on HPE Ethernet 10Gb 2-port 535T Adapter .


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.13.0
changelog:
  -     This product no longer supported of updating FW via Service Pack for Proliant
      on HPE Proliant Gen9 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.13.50
changelog:
  -     This product addresses an issue about battery POST error caused by unnecessary
      protocol on Supported Devices of this product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.14.0
changelog:
  -      This product addresses an issue incorrect reporting on link status of HPE 631FLR-SFP28 Adapter.
        * This product addresses an issue battery POST error caused by unnecessary protocol on Supported Devices of this product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15.2
changelog:
  -      This product enhances bnxtnvm support OTP programming.
        * This product enhances coredump support to dump  cache contents.
        * This product enhances Firmware command line module modularity
        * This product enhances to add support for disabling Overflow detection for CQs (Completion Queues) of RoCE (RDMA over converged Ethernet )
        * This product enhances FW support for QUIC key (Quick UDP Internet Connection) context backing store management
        * This product enhances to add support for PCIe TPH (TLP Processing Hints)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.15.2
changelog:
  -      This product correct an issue which not allow the user to configure the multi-function mode option with option value string.
        * This product correct an issue which the performance issue is seen with GRO offload (Generic Receive Offload) enable.
        * This product correct an issue which the Firmware upgrade fails if bnxtnvm uses the default value.  increased the timeout value to sufficient vaule.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.16.2
changelog:
  -      This product enhances the RDE BEJ encoding for some MessageArgs.
        * This product removes CCM(Comprehensive Configuration Management) for the legacy driver.
        * This product removes Energy-Efficient Ethernet (EEE) from the PHY.
        * This product adds range validation checks to dest_port and dest_port_mask for ntuple commands.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.16.2
changelog:
  -      This product fixes the issue of incorrect PCIe VF numbers caused by some NCSI queries.
        * This product fixes the RDE error response for certain properties with unsupported input
        * This product fixes the problem of no RDE alert being generated when the link status changes.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.17.2
changelog:
  -      This product addressed the NC-SI passthrough algorithm for some FRU-reading commands from platform side.
        * This product addressed the packet forwarding rule while receiving packet which is bigger than 9600 jumbo size.
        * This product addressed the link failure under FreeBSD OS after changing link speed.
        * This product addressed the failure of bringing up VFs of SRIOV when doing on and off switch.
        * This product addressed adapter not responsive when work under heavy loading with 128 VMs.
        * The product addressed status reporting  of PLDM sensor monitoring with BMC.
        * This product addressed the link-flap after link down or warm boot.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.8
changelog:
  -     *The following issues have been fixed in version 12.28.2006:**
      
        * An issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * An issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.31.1014:**
      
        * TX PRBS was not changed even after reconfiguring it, all PRBS mode were enabled in test mode.
        * An assert that was caused when trying to open 1024 functions on the device and the maximum number of functions was 1023.
        * Occasional performance issues related to RC QPs using E2E-credits (not connected to SRQ and doing send/receive traffic) when the ROCE_ACCL tx_window was enabled.
        * A fatal error occurred and eventually resulted in the HCA to get into an unresponsive state when a packet was larger than a strided receive WQE that was being scattered.
        * A rare issue that caused RX pipe to hang.
        * The resource number size (a 64 bit number) was overwritten with a 32 bit number and erased the high bits when de-allocating the resource number.
        * CRT_DCR with index larger than 1 << 21 occasionally collided with the CRT_SW_RESERVED address.
        * An issue that caused the TX queue to get into an unresponsive state when the VF rate limiter was set.
      
      **Additional Fixes included in version 16.31.1014:**
      
        * Disabled the CNP counter "rp_cnp_ignored " (triggered by OOS (out-of-sequence)) when all ports are IB.
        * Fixed the TMP421 sensor temperature reporting.
        * Fixed the rate select mechanism in QSFP modules.
        * Fixed classification issues for "Passive" cables to be more robust.
        * Initialized the rate table in the static configuration so it will be configured at the link-not-up scenarios.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.32.1010:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.32.1010:**
      
        * Added support for blocking unwanted GMP classes by dedicated MADs.
        * Added a new NvConfig parameter LOG_MAX_QUEUE to set the maximum number of work queue resources (QP, RQ, SQ...) that can be created per function. The default value is 2^17.
        * Added a Congestion Control Key to all Congestion Control MADs to authenticate that they are originated from a trusted source.
        * Added an SMP firewall to block the option of sending SMPs (MADS sent on QP0 from the Subnet Manager) from unauthorized hosts to prevent fake SMPs from being recognized as the SM.
        * Vendor Specific MADs Class 0x9 is no longer supported by the firmware. In case the firmware detects such MAD, the firmware will return a "NOT SUPPORTED" error to the user.
        * Blocked the VF's ability to use both padding and signature in order to prevent the NIC from getting into an unresponsive state.
        * Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its rate limit.
        * Performance improvements in the DCT with AR flow by exposing a hint to the software in DCI software context that indicates that RDMA WRITE on this DCI is not supported.
        * Added support for dynamic timeout mechanism when in InfiniBand mode.
        * Added support for QSHR access register to enable Set and Query rate limit perhost per-port.
        * The firmware now exposes a new Software Steering ICM resource for VXLAN encap expand in order for the SW Steering to manage this resource directly.
        * Added support for asymmetrical VFs per PF. To enable it: PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a none zero value.
        * Added 2 new MAD access registers to enable mlxlink to read/write access registers by LID (to the whole subnet).
        * Enabled the exposure of new ICM resource to the software steering for VXLAN encapsulation expansion.
        * Limited the external loopback speed to the used module's capabilities.
        * Improved linkup time when using the fast linkup capability.
        * Disabled VST on dual port adapter cards when one port is configured as ETH and the other as IB as VST is not available when the port is set as ETH.
        * Added support for DSFP AOC (CMIS) v4 when error code is not reported by the module.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.9
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.32.1010**
      
        * Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
        * The link status was reported incorrectly and consequently caused the link to go down due to incorrect definition of the RX_LOS polarity in the INI.
        * The system got into an unresponsive state when a peer port went down while using an Optical module.
        * Invalid RNR timeout when trying to set it during the rts2rts_qp transition.
        * A fatal assert 0x81C5 occurred when calling get_vport_mad from the MAD APIs. The firmware was trying to compute the number of vPorts using a global function number. To avoid this issue, the API was updated to remove any assumption on the function number. Note: This issue is affects only IB devices.
        * During events, stress caused the firmware to reset the Arm host of the vPort without sending an event. Thus preventing the software from rearming the vPort as it did not receive any event, and the firmware did not send the event because the vPort had no Arm set.
        * The system could not create more than 128K QPs.
        * The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
        * PCIe lane margining capability issues.
        * An issue related to the sl2vl mad that caused a few msec hiccup in the transmission on an InfiniBand network when the SM sent the sl2vl mad to a node in the cluster.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.33.1048:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.33.1048:**
      
        * Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.  
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be
      blocked.
      
        * Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
        * Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
        * Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
        * Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation.
        * Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
        * Disabled the option to send SMPs from unauthorized hosts.
        * Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
        * Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
        * Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter.
        * Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.11
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.33.1048**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.1012:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.1012:**
      
        * Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.  
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be
      blocked.
      
        * Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
        * Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
        * Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
        * Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation.
        * Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
        * Disabled the option to send SMPs from unauthorized hosts.
        * Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
        * Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
        * Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter.
        * Enabled delay drop for hairpin packets. If a hairpin QP is created with delay_drop_en enabled, the feature will be enabled across all GVMIs, based on the delay drop status.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.12
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.1012**
      
        * Rare lanes skew issue that caused CPU to timeout in Rec.idle.
        * The card occasionally masked some PCIe AER reporting.
        * Incorrect flow of credits blockage that prevented booting during DC cycle test.
        * An issue with BMC medium migration from SMBUS to PCIe, and increased FIFOs to pass large packets in case of the migration.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Firmware for the following devices has been updated to 12.28.2006:**
      
        * 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)  
      
      
      **Firmware for the following devices has been updated to 16.35.3006:**
      
        * 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
        * 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
      
      
      
      **New features and changes included in version 12.28.2006:**
      
        * Increased the maximum XRQ number to 512.
      
      **New features and changes included in version 16.35.3006:**
      
        * Enabled ACS for single port cards.
        * Added vPort counters after creating the LAG demux table to count kernel packets reaching all the PFs participating in the LAG.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.0.13
changelog:
  -     *Fixes in version 12.28.2006:**
      
        * Fixed an issue that caused the DCR (DC Resources) to be destroyed before the retry option managed to work when the retry timeout is too big. in this case, the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
        * Increased PHY power consumption limit to 1.5w.
        * Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
      
      **The following issues have been fixed in version 16.35.3006:**
      
        * Packet loss that occurred when restarting the transmit. 
        * An issue that prevented RoCE malformed packets (UDP packet with dest_port equal to RoCE well known udp_dport (0x4791)) from being counted on the vport_counter when the function disables RoCE (through MODIFY_NIC_VPORT_CONTEXT command).
        * A memory leakage that occurred when closing connected QPs (Type RC/UC/XRC/DC).
        * Added a missing VLAN strip.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.26-2.1
changelog:
  -      Updated to support Service Pack for ProLiant version 2017.07.0
      
                **Note:** If version 1.26 was previously installed, then it is not necessary to upgrade to version 1.26 (B).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.79-2.1
changelog:
  -     Drive may show up missing after a system reboot.
      
      Please reference Customer Advisory a00098241en_us


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39
changelog:
  -     It's the transition version before migrating to newer version 0.39(B). 0.39
      doesn't have any function change or issue fix, just to activate the new
      Product ID naming.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39
changelog:
  -      It's the transition version before migrating to newer version 0.39(B). 0.39 doesn't have any function change or issue fix, just to activate the new Product ID naming.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 0.39-2.1
changelog:
  -      Modify Product ID to "A4200 Gen10P LFF" and "A4200 Gen10P SFF" to distinguish the different generation expander backplane.


