• Remove ROM flash way from this FWPKG.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions..
    • ]]>         Important Notes:

    Ver. 1.0.0.22(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         The following new features and changes have been included in version 24.10-0.7.0.1:

    • [Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
    • Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
    • Added support for setting a maximum number of completion EQs for SFs.
    • Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
    • [Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).
    ]]>         The following issues have been fixed in version 24.10-0.7.0.1:

    • The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
    • "rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
    • When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.
    ]]>         The following new features and changes have been included in version 24.07-0.6.1.1:

    • Changed the SF initiation/boot flow to avoid EQ creations. Now EQ will be created only when required by the user/system QPs.
    • [Beta] fwctl is a new subsystem intended to bring some common rules and order to the growing pattern of exposing a secure firmware interface directly to the userspace. fwctl focuses on debugging, configuration and provisioning of the device. As fwctl is not installed by default, you can install it by adding "--fwctl" to the installation command.
    • Exposes the req_transport_retries_exceeded counter (per QP counter). It can be seen using the RDMA statistics, and shows the number of times the requester detected transport retries exceed error.
    • Creates a single netdev abstraction for multiple Socket-Direct PFs of the same port that run on multiple NUMA nodes. This single netdev handles traffic locally on each of the NUMA nodes without upper layer complexities. This improves the applications' locality and performance in a multi-NUMA system.
    • Added devlink-nested option to show relationships between devlink instances through devlink dev show/devlink port show commands. The devlink port show is used to check when SFs are activated, and shows the relationship between SF auxiliary device devlink instance and the eSwitch representor devlink port. Devlink Scalable Function (SF) activate command is received before enabling a partial parallelization of the SFs activation, and reduces time.
    • Extended the number of rules to be offloaded to all ports from 8 to 32. This allows greater flexibility when offloading temporary rules like VLAN traffic and ease the offload sharing between the ports.
    ]]>         The following issues have been fixed in version 24.07-0.6.1.1:

    • The InfiniBand Subnet Manager (version 5.19) became unresponsive if multicast join request was received during the Heavy Sweep.
    • Executing cma_roce_mode -d [device] would inadvertently delete contents of /sys/kernel/config/rdma_cm. This occurred due to the removal of the rdma_cm/ device directory upon script exit, affecting system configuration.
    • Corruption of SMP MAD requests list occurred when the sent list was accessed while the unregistered flow was running.
    • Data corruption occurred when GRE offload was turned on. The packet inspection parsing was fixed to avoid this by parsing the outer header as UDP and not as TCP.
    • "netdev" queue value was not updated in mqprio param when switchdev mode was enabled and the netdev queue number was reset to 1.
    • Performing CT entry update resulted in failure as it exceeded the firmware limit.
    • Stack overrun warning issue (This was fixed by reducing the size of the local on-stack array used for optimization by 192 bytes).
    • An overflow issue where RDMA applications could not find the device when creating new RDMA devices.
    • Some MRs missed the ATS enablement. Lack of ATS enablement on DMABUF MRs resulted in slower performance when using these MRs.
    • An issue related to the driver's internal MR cache cleanup process that resulted in high memory consumption on the host.
    ]]>         TBD

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         irmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new issues have been fixed in version 12.28.2302.
     

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         irmware for the following devices has been updated to 12.28.2006:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Added an option using REST API to rotate the ESKM password
  • Added support for digit validation in PIN based onboarding of iLO to COM
    • ]]>
  • Fixed an issue where the MCTP retry mechanism in i2c communication failed.
  • Fixed an issue where the IPMI boot parameters were not functioning through the BMC IPMI interface.
  • Fixed an issue where the Kerberos client advertised insecure encryption (RC4, DES) types and rejected the deprecated ones. As a part of this fix, RC4, DES, and 3DES algorithms are removed from the Kerberos requests.
  • Fixed an issue of firmware update failures by increasing the time delay between retries for PCIe VDM transmit buffer.
  • Fixed an issue for the sensor values that were reported in the GET_SENSOR response though these sensors were marked as non-supported in the PDR table.
  • Fixed the issue with missing storage controller condition values with the IDA condition for the MIB status array for the SR Controller Gen 10 Smart Array and MR Controller Gen 10 Smart Array.
  • Fixed an issue of abnormal noise in the fans of HPE ProLiant ML350 Gen10 Tower Server and HPE ProLiant DL360 Gen10 servers during POST across newer iLO 5 firmware versions.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>         It has fix code for V6 read disturb and other issues

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.43.1014:

    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

    HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry.

    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action r educes the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    ]]>         The following issues have been fixed in version 26.43.1014:

    • Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
    • Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Removed the logical port rate limiter to prevent the internal loopback traffic from exceeding the physical port network link speed when using the esw scheduling feature.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 26.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • The "time_since_last_clear" counter showed wrong indications.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Support SY480 Gen12 server.

    ]]>         Support RL300 Gen11 server and Gen12 servers.

    ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Agentless Management Service

    • Fixed OID name hrSystemUptime is reported incorrectly
    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Updated supported environments
  • Updated supported platforms
    • ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         TBD

     

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.43.1014:

    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

    HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry.

    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action r educes the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    ]]>         The following issues have been fixed in version 26.43.1014:

    • Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
    • Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Removed the logical port rate limiter to prevent the internal loopback traffic from exceeding the physical port network link speed when using the esw scheduling feature.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 26.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • The "time_since_last_clear" counter showed wrong indications.
    ]]>
  • Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.
  • MlxNdPerf now supports bandwidth tests with multiple QPs.
  • Added support for dynamic steering rule insertion in DevX interface.
    • ]]>
  • This product fixed an issue that prevented the VF diagnostic counters from being shown when assigned a VF from multiple adapters to the same VM, queried for counters and removed all VFs from one adapter.
  • This product fixed a rare case when polling returns wrong request context.
    • ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>          This is an initial FW.

    ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         TBD

    ]]>
  • This product enhanced to support log FW Failure Critical Data in Recovery Mode.
  • This product enhanced to support add module parameters pause_rx and pause_tx for Link Flow Control and enable it by default.
    • ]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Support ESXi8.0

    ]]>
  • Support HPE ProLiant DL325 Gen10 Plus Server
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Add new support platform.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>         Firmware maintenance release of HPK3

    • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change.  
    • If drive FW needs to downgrade from HPK3 to HPK2, a reset/POR is required.
    • SSID will change from a801 to 03b5 after FW update to HPK3.

     

    ]]>         Firmware maintenance release of HPK3

    • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change.  
    • If drive FW needs to downgrade from HPK3 to HPK2, a reset/POR is required.
    • SSID will change from a801 to 03b5 after FW update to HPK3.

     

    ]]>         Initial version.

    ]]>         Initial version.

    ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.
  • MlxNdPerf now supports bandwidth tests with multiple QPs.
  • Added support for dynamic steering rule insertion in DevX interface.
    • ]]>
  • This product fixed an issue that prevented the VF diagnostic counters from being shown when assigned a VF from multiple adapters to the same VM, queried for counters and removed all VFs from one adapter.
  • This product fixed a rare case when polling returns wrong request context.
    • ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>         TBD

    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
     
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Sever 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and arenot applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and arenot applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>         For 2025 Jan SPP.

    ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         The following new features and changes have been included in version 24.10-0.7.0.1:

    • [Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
    • Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
    • Added support for setting a maximum number of completion EQs for SFs.
    • Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
    • [Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).
    ]]>         The following issues have been fixed in version 24.10-0.7.0.1:

    • The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
    • "rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
    • When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.
    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product fixes warning message: index 1 is out of range.

    ]]>
  • This product now adds more trace events related to SFP module IOCTLs.
  • This product now adds Red Hat Enterprise Linux 9 update 4.
    • ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         TBD

    ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         1) Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2) Adding other logging and FW enhancements.

    ]]>         Update maximum continuous operation temperature values for host thermal management and reporting.

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform.

    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>         Initial version.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>
  • Updated SBOM requirement
    • ]]>
  • Update version
    • ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in Linux operating system.

    Addressed an issue where the system might failed to update NVMe drive firmware.

    Known Issues:

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Added an option using REST API to rotate the ESKM password
  • Added support for digit validation in PIN based onboarding of iLO to COM
    • ]]>
  • Fixed an issue where the MCTP retry mechanism in i2c communication failed.
  • Fixed an issue where the IPMI boot parameters were not functioning through the BMC IPMI interface.
  • Fixed an issue where the Kerberos client advertised insecure encryption (RC4, DES) types and rejected the deprecated ones. As a part of this fix, RC4, DES, and 3DES algorithms are removed from the Kerberos requests.
  • Fixed an issue of firmware update failures by increasing the time delay between retries for PCIe VDM transmit buffer.
  • Fixed an issue for the sensor values that were reported in the GET_SENSOR response though these sensors were marked as non-supported in the PDR table.
  • Fixed the issue with missing storage controller condition values with the IDA condition for the MIB status array for the SR Controller Gen 10 Smart Array and MR Controller Gen 10 Smart Array.
  • Fixed an issue of abnormal noise in the fans of HPE ProLiant ML350 Gen10 Tower Server and HPE ProLiant DL360 Gen10 servers during POST across newer iLO 5 firmware versions.
    • ]]>         Driver version 5.4.83.1

     

    ]]>         Driver version 5.4.82.1

     Fixed the DHL customer issue ID SIE276639.

    ]]>          Fixed the DHL customer issue ID SIE276639.

    ]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Added an option using REST API to rotate the ESKM password
  • Added support for digit validation in PIN based onboarding of iLO to COM
    • ]]>
  • Fixed an issue where the MCTP retry mechanism in i2c communication failed.
  • Fixed an issue where the IPMI boot parameters were not functioning through the BMC IPMI interface.
  • Fixed an issue where the Kerberos client advertised insecure encryption (RC4, DES) types and rejected the deprecated ones. As a part of this fix, RC4, DES, and 3DES algorithms are removed from the Kerberos requests.
  • Fixed an issue of firmware update failures by increasing the time delay between retries for PCIe VDM transmit buffer.
  • Fixed an issue for the sensor values that were reported in the GET_SENSOR response though these sensors were marked as non-supported in the PDR table.
  • Fixed the issue with missing storage controller condition values with the IDA condition for the MIB status array for the SR Controller Gen 10 Smart Array and MR Controller Gen 10 Smart Array.
  • Fixed an issue of abnormal noise in the fans of HPE ProLiant ML350 Gen10 Tower Server and HPE ProLiant DL360 Gen10 servers during POST across newer iLO 5 firmware versions.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         TBD

    ]]>
  • This product enhances to enable RSS code to support systems with more than 256 CPU cores.
  • This product enhances to support Wake-on-LAN with 1G connection.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Support new Gen12 servers.

    ]]>         Support new ML110 and DL560 Gen11 servers

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
     
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New changes included in component version 1.0.0.22(A):

    • Added support for Azure Stack HCI 23H2 in the component metadata.

     

    No new features or changes have been included in firmware version 14.32.1900.

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>         Init. version for VMware 9.0.

    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset
  • The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented
  • The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>         It has fix code for V6 Read disturb issue and other issue

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product enhances to support new OS version.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    • Added HPE ProLiant Compute DL380a Gen12 Server support
    ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    ]]>         Support VMware ESXi 9.0.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         TBD

    ]]>         This product fixed to prevent BSOD issue.

    ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Updated SBOM requirement
    • ]]>
  • Update version
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 8.7 

    • Added support of Rhel 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in Linux operating system.

    Addressed an issue where the system might failed to update NVMe drive firmware.

    Known Issues:

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>         TBD

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes warning message: index 1 is out of range.

    ]]>         This product now adds more trace events related to SFP module IOCTLs.

    ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>         TBD

    ]]>         This product enhances to support new OS version.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>
  • Initial Release.
    • ]]>
  • Initial Release.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA will published later at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         TBD

    ]]>         This product corrects an issue which system crashed due to hardware error.

    ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         7.30 Patch Release Drop

    ]]>
  • New release for version 7.728.2.0.
    • ]]>         Updated to version 9.4.9.21

    ]]>         Updated to version 9.4.8.20

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.04.04.702 (2.30_01_06_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         7.30 Beta Drop

    ]]>
  • Add "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset
  • Support RHEL 8.9
    • ]]>
  • Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and are not applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and are not applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>
  • Added HPC Cray XD665 and XD685 servers support
    • ]]>         Support new server.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform

    • ]]>         Driver version 5.4.83.1
    This driver is only supported on VMware ESXi 9.0

     

    ]]>         Driver version 5.4.83.1
    This driver is only supported on VMware ESXi 9.0

     

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Updated Supported Environments
    • ]]>
  • AMD EPYC DRTM Driver update
    • ]]>         TBD

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added Azure Stack HCI 23H2 support
    • ]]>
  • Fix for [CSFE-55071]
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Firmware for the following devices has been updated to 20.43.1014:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>
  • This product enhances the reporting of a consistent PTP clock for NXE family devices.
  • This product enhances device compatibility by adding the necessary PNP ID.
    • ]]>         This product fixes the issue where an unused release.txt file was not removed.

    ]]>
  • This product enhances to show user friendly message when trying to install an already installed RDMA provider.
  • This product enhances to update VF RoCE resource assignment in the PF.
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Previous firmware version HPK5 may cause Uncorrectable Machine Check Exception (UMCE) to occur. It is recommended to update firmware version to HPK6.
  • For more information, CA is published at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         TBD

    ]]>          

    This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Updated Supported Environments
    • ]]>
  • Added Supported Environments
  • Added Supported Platforms
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>
  • This product addressed the secondary queues usage for fragmented IP packets.
  • This product addressed the per-queue statistics for native mode.
  • This product addressed the Broadcast packets forwarding rules to avoid ARP loopback issue for VMDQ traffic.
    • ]]>
  • This product addressed the secondary queues usage for fragmented IP packets.
  • This product addressed the per-queue statistics for native mode.
  • This product addressed the Broadcast packets forwarding rules to avoid ARP loopback issue for VMDQ traffic.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method.
    • ]]>
  • Fixed flashing issue through SDR method.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>
  • Added HPE ProLiant Compute DL380a Gen12 Server support
    • ]]>         Important Notes:

    Ver. 1.1.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.1.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.1.4.

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Support ESXi9.0.

    ]]>
  • Support HPE ProLiant DL180 Gen10 Server
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         TBD

    ]]>         This product is updated to maintain compatibility with CNSA (Commercial National Security Algorithm) compliance.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Windows Server 2025.
  • Added support to enable DMA remapping feature for Windows Server 2025.
    • ]]>
  • Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.
    • ]]>
  • Added support for Windows Server 2025.
  • Added support to enable DMA remapping feature for Windows Server 2025.
    • ]]>
  • Fixed the issue that memory dump sometimes cannot be captured when Remote Key Management mode is enabled.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added supported_platforms tag
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now sets the minimum number of allocated queues to 4.
    • ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now sets the minimum number of allocated queues to 4.
    • ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>
  • Updated supported environments
    • ]]>         Important Notes:

    Ver. 0.2.3.0(D) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Support Azure Stack HCI 23H2. 

    ]]>         Support Microsoft Windows Server 2025. 

    ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    • Added HPE ProLiant Compute DL380a Gen12 Server support
    ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product now sets the minimum number of allocated queues to 4.

    ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • This product fixes an issue where VLAN set operation may leads to deadlock.
  • This product fixes an issue where a NULL pointer dereference in early reset.
  • This prodcut fixes an issue where users fail to change the number of queues (channels).
  • This product fixes an issue where system hang when VFs are created and VLAN configured.
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support ofRHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>         This package supports only Red Hat Enterprise Linux (RHEL) Distros

    Modified adapter support -- added 16Gb adapter support ( 1200E,1100Q single and dual adapter support )

    ]]>         This package supports only Red Hat Enterprise Linux (RHEL) Distros

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Columbiaville 4.4.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for UBM10 backplanes
  • Do not populate Box field for non-hotplug backplane configuration
  • Add a switch support spin down drives during shutdown
  • Added HPE ProLiant Compute DL380a Gen12 Server support
    • ]]>
  • Added support for UBM10 backplanes
  • Do not populate Box field for non-hotplug backplane configuration
  • Add a switch support spin down drives during shutdown
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>
  • This product enhances NC-SI implementation for multiple physical mediums.
  • This product enhances firmware debug trace improvement.
  • This product enhances to add more debug data to coredump.
  • This product enhances to increase resource to handle the NC-SI commands concurrently.
  • This product enhances to set LLDP Disable request if DCBX is enabled.
  • This product enhances multiple lossless traffic classes support.
    • ]]>
  • This product addresses issue about IPVlan support.
  • This product fixes an issue where the Transceiver Temperature is an erroneous unit value.
  • This product addresses to exposing MCTP discovery through NICCLI utility.
  • This product fixes an issue where missing supported speed is seen for adapter.
  • This product fixes an issue where ethtool shows wrong module type when a port is in a certain breakout mode.
    • ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5 and Columbiaville 4.5.

    ]]>
  • Updated supported environments
    • ]]>
  • Updated SBOM requirement
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4 and Columbiaville 4.4.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.04.04.702 (2.30_01_06_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product enhances to add SystemDescription support for the RDE Redfish Port schema.

    ]]>
  • This product fixes an issue when MAC loopback is enabled, the firmware 'fakes out' the link status to the host.
  • This product fixes an issue where an incorrect value is shown for SFP.FiberConnectionType property when transceivers are connected in RDE Redfish.
  • This product fixes an issue where SystemDescription missing the character and inappropriate JSON format displaying under port schema in RDE Redfish.
  • This product addresses to remove support ManagementVlanId property for the RDE Redfish.
    • ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    • Added HPE ProLiant Compute DL380a Gen12 Server support
    ]]>
  • Improve message for valid range on online controller reset delay
  • Add a switch support spin down drives during shutdown

    •     o /cx show spindownatshutdown
        o /cx set spindownatshutdown {[sashdd=<on|off>] [satahdd=<on|off>]
            [sasssd=<on|off>] [satassd=<on|off>] [nvmessd=<on|off>]}

    • Adjust the RAID1 consistency related error message
    ]]>
  • Added a new counter "Allocated Memory Pages" to show the number of memory pages (4KB) allocated to the firmware from the host system.
  • MlxNdPerf now supports bandwidth tests with multiple QPs.
  • Added support for dynamic steering rule insertion in DevX interface.
    • ]]>
  • This product fixed an issue that prevented the VF diagnostic counters from being shown when assigned a VF from multiple adapters to the same VM, queried for counters and removed all VFs from one adapter.
  • This product fixed a rare case when polling returns wrong request context.
    • ]]>         Initial version

    ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>

  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240). 

    • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248). 

    • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.

    ]]>

  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts. 

    • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive. 

    • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives or slow drives. 

    • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot. 

    • Fixed an issue where the surface scan period was not reset to default after factory reset. 

    • Fixed an issue where the predictive failure drive did no€t fail even after the Predictive Spare Rebuild (PSR) was completed. 

    • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle. 

    • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive. 

    • Fixed a possible lockup that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup. 

    • Fixed a potential issue where a good drive could be incorrectly marked as a predictive failure drive. 

    • Fixed a lockup issue that could occur during I/O to a degraded volume using Smart Path. 

    • Fixed a drive firmware update failure due to incorrect handling of sense data for specific SATA drives. 

    • Fixed a Controller boot failure when inserted in PCIe Gen 6 systems. 

    • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities. 

    • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password. 

    • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish 

    • Fixed an issue that enclosures Link is missing under Storage URI in Redfish. 

    • Fixed an issue in which drive resource does not match with Chassis for empty bay. 

    • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress. 

    • Fixed an issue where HealthRollup shows warning during normal state. 

    • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded. 

    • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion. 

    ]]>         SR 2.9.2/SR 3.4.2 RC2

    ]]>
  • Support Gen12 servers.
    • ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Support new Gen12 servers.

    ]]>         Support both Gen10P and Gen11 servers

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    ]]>         New features and changes included in version 28.43.1014:

    • Added support for PCIe Telemetry (NSM Type 2).
    • Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    • Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
    • Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
    • Changed the CTLE and VGA gain for Gen4/5 starting point.
    • Increased SPDM's RDT value.
    ]]>         The following issues have been fixed in version 28.43.1014:

    • PLDM included port temperature sensor PDR only if an active cable was connected.
    • PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
    • MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
    • Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    • An issue related to override TP4 settings.
    • A rare certificate signature verification error.
    • Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
    • Incorrect user_cc_en default value (mlxreg).
    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         TBD

    ]]>         This product corrects an issue which Windows Server 2022 crashes when system has high number of logical processors.

    ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>
  • This product enhances NC-SI implementation for multiple physical mediums.
  • This product enhances firmware debug trace improvement.
  • This product enhances to add more debug data to coredump.
  • This product enhances to increase resource to handle the NC-SI commands concurrently.
  • This product enhances to set LLDP Disable request if DCBX is enabled.
  • This product enhances multiple lossless traffic classes support.
    • ]]>
  • This product addresses issue about IPVlan support.
  • This product fixes an issue where the Transceiver Temperature is an erroneous unit value.
  • This product addresses to exposing MCTP discovery through NICCLI utility.
    • ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>         This package supports only SuSE Linux Enterprise Server(SLES) Distros

    Modified adapter support -- added 16Gb adapter support ( 1200E,1100Q single and dual adapter support )

    ]]>         This package supports only SuSE Linux Enterprise Server(SLES) Distros

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         New features and changes included in version 28.44.1036:

    • Increased the RX lossless buffer size to delay the transmission of Pause/PFC frames during NIC congestion.
    • Added support for SyncE at 1G link speed.
    • Added a new mechanism for allocations and deallocations flows to enhance parallelism.
    • When using a multi-host deployment, each host is assigned unique ports and PFs and manages its own LAG.
    • Added support for a new synchronized flow, including a tool and driver, to perform a fwreset on setups with a PCIe switch configuration.
    • Unified PTP is now supported across different VFs on the same PF.
    • Added support for new MADs: PortRecoveryPolicyConfig and PortRecoveryPolicyCounters . During the PHY recovery process, the firmware core will indicate the  port_logical_state as Active.
    • Added a new NV config (SM_DISABLE, default 0) which, when enabled, blocks SMP traffic that does not originate from the SM.
    • Added the ability to set cable length as a parameter in the PFCC access register. The cable length is used in the calculation of RX lossless buffer parameters, including size, Xoff, and Xon thresholds.
    ]]>         The following issues have been fixed in version 28.44.1036:

    • Cable info semaphore deadlock.
    • Improper error handling for the TLV full list, which caused the TLV mechanism to hang.
    • The SPDM GET_CERTIFICATE operation did not support all certificate chain offsets and chunk sizes.
    • An issue in VDPA where destroying a virtq would cause a health buffer syndrome with ext_synd=0x8f33 if the virtq was created without an mkey or with unmanned and mapped mkeys during live migration.
    • The VDPA feature bits GUEST_TSO4 and GUEST_TSO6 were unexpectedly set by default, leading to traffic interruptions.
    • Enabling PCC NP and setting the link type to one port as IB and the other as Ethernet could cause an assert to appear in dmesg with ext_synd 0x8309.
    ]]>         New features and changes included in version 28.43.1014:

    • Added support for PCIe Telemetry (NSM Type 2).
    • Migrated PCC NP solution from ACE hardware platform to DPA hardware platform. The new capability is applicable to the following modes: 1) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=INGRESS_BYTE 2) PCC_INT_EN=True and PCC_INT_NP_RTT_DATA_MODE=NO_DATA. The first mode is used to support ZTRCC RX bytes in RTT response.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    • Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARC-OUT" from 3 to 8 for the dynamic flex parser.
    • Added histogram support for rate and Round-Trip Time (RTT) in PCC ZTR_RTTC.
    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Changed PCIe Gen4/5 new static configuration for VGA gain and CTLE.
    • Changed the CTLE and VGA gain for Gen4/5 starting point.
    • Increased SPDM's RDT value.
    ]]>         The following issues have been fixed in version 28.43.1014:

    • PLDM included port temperature sensor PDR only if an active cable was connected.
    • PTP accuracy degradation occasionally occurred for port speed configured to 1G or 10G.
    • MSIx reduction flow was triggered with an incorrect limitation (the total number of MSIx is reduced from 8k to 4k by mistake) when the dynamic MSIx feature was enabled and virtio emulation was disabled.
    • Lossless packet drops at 400GB 4 lanes when using an optic fiber cable.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    • An issue related to override TP4 settings.
    • A rare certificate signature verification error.
    • Erroneous cable linkup process after reinserting a module in multi ASIC platforms.
    • Incorrect user_cc_en default value (mlxreg).
    ]]>         TBD

    ]]>
  • This product corrects an issue which fix TSO (TCP Segmentation Offload) issue when single segment is larger than pkt length.
  • This product corrects an issue which PSOD while freeing DMA during 'esxcli qlfastlinq qcc' command execution.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Updated supported environments
    • ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>
  • Updated supported environments
    • ]]>
  • Updated supported environments
    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>
  • This product enhances NC-SI implementation for multiple physical mediums.
  • This product enhances firmware debug trace improvement.
  • This product enhances to add more debug data to coredump.
  • This product enhances to increase resource to handle the NC-SI commands concurrently.
  • This product enhances to set LLDP Disable request if DCBX is enabled.
  • This product enhances multiple lossless traffic classes support.
    • ]]>
  • This product addresses issue about IPVlan support.
  • This product fixes an issue where the Transceiver Temperature is an erroneous unit value.
  • This product addresses to exposing MCTP discovery through NICCLI utility.
  • This product fixes an issue where ethtool shows wrong module type when a port is in a certain breakout mode.

    •  

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • This is a planned maintenance release covering bug fixes. This firmware includes updates to improve PLI circuit reliability.
    • ]]>
  • HPG3 is a planned maintenance release covering bug fixes for 2.5” and M.2. There are no critical functional updates, and risk is low for customers who do not upgrade, especially if drives are not stored without power for a long period of time (~2 years).
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.43.1014:

    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

    HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry .

    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    • Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARCOUT" from 3 to 8 for the dynamic flex parser.
    ]]>         The following issues have been fixed in version 22.43.1014:

    • Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
    • An upgrade issue that required firmware v22.36.1010 as an intermediate version when upgrading the firmware from v22.33.0428 or below to versions above 22.36.1010.
    • Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.41.1000:

    • The new unified_fdb subdomain simplifies the FDB model by eliminating the need to duplicate rules for RX and TX tables. This domain is directionless, meaning no RX/TX specific actions are allowed. Firmware now handles packet transitions IN and OUT of the unified domain, allowing for a more streamlined packet flow management. Software can now transition between unified_fdb and FDB_RX/FDB_TX domains as long as the packet maintains the same direction, without the risk of dropping the packet when crossing between RX and TX.
    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added the ability to generate up to 2^30 STE objects through the general object creation command.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 22.41.1000:

    • GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
    • Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>
  • Updated Supported Environments
    • ]]>
  • Updated driver
  • Updated supported platforms
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New changes included in component version 1.0.0.12(A):

    • Added support for Azure Stack HCI 23H2 in the component metadata.

     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
       

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 1.0.0.15(A):

    • Added support for Azure Stack HCI 23H2.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new issues have been fixed in version 12.28.2302.
     

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         irmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
       

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new issues have been fixed in version 12.28.2302.
     

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.

    • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00141941en_us 

    ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>         TBD

    ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         TBD

    ]]>
  • This product enhances to show user friendly message when trying to install an already installed RDMA provider.
  • This product enhances to update VF RoCE resource assignment in the PF.
    • ]]>         TBD

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added Azure Stack HCI 23H2 support

    ]]>         Support Microsoft Windows Server 2025. 

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform

    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         TBD

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>
  • Support ESXi9.0
    • ]]>
  • Update build environment with SHA384
  • Update OS
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>
  • This product enhances to add support to handle TPID (Tag Protocol Identifier).
  • This product enhances adding version information in Broadcom snapdump driver logs.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform

    • ]]>         TBD

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         For 2025 Jan SPP.

    ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         Upgraded to version 22.43.1014

    ]]>         Upgraded to version 22.43.1014

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Driver update
  • Updated supported platforms
    • ]]>
  • Driver update
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         TBD

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142174en_us
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Updated to version 3.3-3

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Updated to version 3.3-3

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         The following new features and changes have been included in version 24.10-0.7.0.1:

    • [Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
    • Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
    • Added support for setting a maximum number of completion EQs for SFs.
    • Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
    • [Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).
    ]]>         The following issues have been fixed in version 24.10-0.7.0.1:

    • The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
    • "rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
    • When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.
    ]]>         The following new features and changes have been included in version 24.07-0.6.1.1:

    • Changed the SF initiation/boot flow to avoid EQ creations. Now EQ will be created only when required by the user/system QPs.
    • [Beta] fwctl is a new subsystem intended to bring some common rules and order to the growing pattern of exposing a secure firmware interface directly to the userspace. fwctl focuses on debugging, configuration and provisioning of the device. As fwctl is not installed by default, you can install it by adding "--fwctl" to the installation command.
    • Exposes the req_transport_retries_exceeded counter (per QP counter). It can be seen using the RDMA statistics, and shows the number of times the requester detected transport retries exceed error.
    • Creates a single netdev abstraction for multiple Socket-Direct PFs of the same port that run on multiple NUMA nodes. This single netdev handles traffic locally on each of the NUMA nodes without upper layer complexities. This improves the applications' locality and performance in a multi-NUMA system.
    • Added devlink-nested option to show relationships between devlink instances through devlink dev show/devlink port show commands. The devlink port show is used to check when SFs are activated, and shows the relationship between SF auxiliary device devlink instance and the eSwitch representor devlink port. Devlink Scalable Function (SF) activate command is received before enabling a partial parallelization of the SFs activation, and reduces time.
    • Extended the number of rules to be offloaded to all ports from 8 to 32. This allows greater flexibility when offloading temporary rules like VLAN traffic and ease the offload sharing between the ports.
    ]]>         The following issues have been fixed in version 24.07-0.6.1.1:

    • The InfiniBand Subnet Manager (version 5.19) became unresponsive if multicast join request was received during the Heavy Sweep.
    • Executing cma_roce_mode -d [device] would inadvertently delete contents of /sys/kernel/config/rdma_cm. This occurred due to the removal of the rdma_cm/ device directory upon script exit, affecting system configuration.
    • Corruption of SMP MAD requests list occurred when the sent list was accessed while the unregistered flow was running.
    • Data corruption occurred when GRE offload was turned on. The packet inspection parsing was fixed to avoid this by parsing the outer header as UDP and not as TCP.
    • "netdev" queue value was not updated in mqprio param when switchdev mode was enabled and the netdev queue number was reset to 1.
    • Performing CT entry update resulted in failure as it exceeded the firmware limit.
    • Stack overrun warning issue (This was fixed by reducing the size of the local on-stack array used for optimization by 192 bytes).
    • An overflow issue where RDMA applications could not find the device when creating new RDMA devices.
    • Some MRs missed the ATS enablement. Lack of ATS enablement on DMABUF MRs resulted in slower performance when using these MRs.
    • An issue related to the driver's internal MR cache cleanup process that resulted in high memory consumption on the host.
    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.3502:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

     

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
       

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
       

    No fixes are included in firmware version 16.35.3502.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None]]>
  • Added Azure Stack HCI 23H2 support
    • ]]>
  • Fix for [CSFE-55071]
    • ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4 and Columbiaville 4.4.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         TBD

    ]]>
  • PLDM Base (Type 0) commands comply with v1.2.0 of the PLDM base specification (DSP0240).
  • PLDM Platform Monitoring and Control (Type 2) commands comply with v1.3.0 of the PLDM Platform Monitoring and Control Specification (DSP0248).
  • Long-running task support for volume creation/deletion using Redfish and storage resource RDE action operations.
    • ]]>
  • Fixed an issue where a lockup occasionally occurs when RAID 0 Predictive Spare Rebuilding (PSR) starts.
  • Fixed an issue where the fault LED remains lit during the rebuild process of a replaced SSD drive.
  • Fixed an issue where the host was unable to retrieve new configuration updates after creating a logical drive on PF drives.
  • Fixed an issue where the logical volume status was incorrectly reported as OK on a secured volume if a data drive was replaced with an Otherwise Owned SED drive before reboot.
  • Fixed an issue where the surface scan period was not reset to default after factory reset.
  • Fixed an issue where the predictive failure drive did not fail even after the Predictive Spare Rebuild (PSR) was completed.
  • Fixed an issue where the Controller might have a potential lockup after a JBOD power cycle.
  • Fixed an issue where the offline replacement of a failed drive during a spare rebuild led to the failure of the replacement drive.
  • Fixed a lockup issue that could occur both during a transformation with an abrupt shutdown, and on subsequent bootup.
  • Fixed an intermittent MCTP communication issue during AC power cycle tests on specific configurations.
  • Fixed an MCTP communication issue in AMD Turin 2P configurations.
  • Fixed a lockup issue that could occur when a timeout occurs with expander attached SATA drives.  
  • Fixed an issue with improper support checking for the secure erase command.
  • Fixed issues for missing active dedicated hot spare member in HII logical drive information and failed drive part of a logical drive in the HII disk utilities.
  • Fixed an issue which threw wrong error code, 'InternalError’ when creating an array on controller that is waiting on adapter password.
  • Fixed an issue When server is powered on with no drives connected to Enclosure. Observe incorrect controller information in iLO Storage tab & Redfish
  • Fixed an issue that enclosures Link is missing under Storage URI in Redfish.
  • Fixed an issue in which drive resource does not match with Chassis for empty bay.
  • Fixed an issue in which incorrect severity warning of drive when sanitize erase operation is in progress.
  • Fixed an issue where HealthRollup shows warning during normal state.
  • Fixed an issue where CacheSummary.Status.Health shows incorrect during WriteCache degraded.
  • Fixed an issue in which PLDM/RDE Read sometimes take longer than 6s during array deletion.
    • ]]>         SR 2.9.2 patch 1

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         The following new features and changes have been included in version 24.10-0.7.0.1:

    • [Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
    • Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
    • Added support for setting a maximum number of completion EQs for SFs.
    • Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
    • [Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).
    ]]>         The following issues have been fixed in version 24.10-0.7.0.1:

    • The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
    • "rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
    • When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.
    ]]>         The following new features and changes have been included in version 24.07-0.6.1.1:

    • Changed the SF initiation/boot flow to avoid EQ creations. Now EQ will be created only when required by the user/system QPs.
    • [Beta] fwctl is a new subsystem intended to bring some common rules and order to the growing pattern of exposing a secure firmware interface directly to the userspace. fwctl focuses on debugging, configuration and provisioning of the device. As fwctl is not installed by default, you can install it by adding "--fwctl" to the installation command.
    • Exposes the req_transport_retries_exceeded counter (per QP counter). It can be seen using the RDMA statistics, and shows the number of times the requester detected transport retries exceed error.
    • Creates a single netdev abstraction for multiple Socket-Direct PFs of the same port that run on multiple NUMA nodes. This single netdev handles traffic locally on each of the NUMA nodes without upper layer complexities. This improves the applications' locality and performance in a multi-NUMA system.
    • Added devlink-nested option to show relationships between devlink instances through devlink dev show/devlink port show commands. The devlink port show is used to check when SFs are activated, and shows the relationship between SF auxiliary device devlink instance and the eSwitch representor devlink port. Devlink Scalable Function (SF) activate command is received before enabling a partial parallelization of the SFs activation, and reduces time.
    • Extended the number of rules to be offloaded to all ports from 8 to 32. This allows greater flexibility when offloading temporary rules like VLAN traffic and ease the offload sharing between the ports.
    ]]>         The following issues have been fixed in version 24.07-0.6.1.1 (A):

    • On Red Hat Enterprise Linux 8 Update 10 (x86_64) errata kernel version 4.18.0-553.16.1 and later, the HPE Mellanox RoCE (RDMA over Converged Ethernet) Driver 8.10 fails to load correctly because of symbol mismatch in the kernel modules and weak-updates failure. The version 24.07-0.6.1.1(A) is built against the errata kernel version 4.18.0-553.16.1 and fixes the above driver load issue on this and the later Red Hat Enterprise Linux 8 Update 10 errata kernel versions.

    The following issues have been fixed in version 24.07-0.6.1.1:

    • The InfiniBand Subnet Manager (version 5.19) became unresponsive if multicast join request was received during the Heavy Sweep.
    • Executing cma_roce_mode -d [device] would inadvertently delete contents of /sys/kernel/config/rdma_cm. This occurred due to the removal of the rdma_cm/ device directory upon script exit, affecting system configuration.
    • Corruption of SMP MAD requests list occurred when the sent list was accessed while the unregistered flow was running.
    • Data corruption occurred when GRE offload was turned on. The packet inspection parsing was fixed to avoid this by parsing the outer header as UDP and not as TCP.
    • "netdev" queue value was not updated in mqprio param when switchdev mode was enabled and the netdev queue number was reset to 1.
    • Performing CT entry update resulted in failure as it exceeded the firmware limit.
    • Stack overrun warning issue (This was fixed by reducing the size of the local on-stack array used for optimization by 192 bytes).
    • An overflow issue where RDMA applications could not find the device when creating new RDMA devices.
    • Some MRs missed the ATS enablement. Lack of ATS enablement on DMABUF MRs resulted in slower performance when using these MRs.
    • An issue related to the driver's internal MR cache cleanup process that resulted in high memory consumption on the host.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.

    •  

    ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         TBD

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>         This product now sets the minimum number of allocated queues to 4.

    ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This product now sets the minimum number of allocated queues to 4.

    ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This is the first driver for Windows 2025 . The driver version is 9.4.11.20.

    ]]>         This is the first driver for Windows 2025 . The driver version is 9.4.11.20.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>
  • Updated SBOM requirement
    • ]]>
  • Added supported_platforms tag
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         TBD

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>
  • Handle IOMMU restore at exit boot services.
  • Implementation of individual controller level heap reservation
  • Add support for MR408i-p Gen11 controller
  • Added HPE ProLiant Compute DL380a Gen12 Server
    • ]]>
  • Fix an issue that firmware version is not displayed completely in the KeyVal interface.
    • ]]>
  • Handle IOMMU restore at exit boot services.
  • Implementation of individual controller level heap reservation
    • ]]>
  • Fix an issue that firmware version is not displayed completely in the KeyVal interface.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Added support of ESXi 8.0 U1
     

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Add support for MR408i-p Gen11 controller
  • Added HPE ProLiant Compute DL380a Gen12 Server
    • ]]>
  • Add support for MR408i-p Gen11 controller
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Update build environment with Rhel9 SHA384
  • Update OS
    • ]]>
  • Update build environment with SHA384
  • Update OS
    • ]]>         Added code signing project SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • For commands that have reported errors to the host, FW has been changed so that new commands are registered after FW performs Abort process for the corresponding command in the command
    management table.
    • ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Initial version.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>         Firmware for the following devices has been updated to 20.43.1014:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform.

    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 05.01.05.005 should be paired with System ROM 3.50 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • This product enhances the reporting of a consistent PTP clock for NXE family devices.
  • This product enhances device compatibility by adding the necessary PNP ID.
    • ]]>         This product fixes the issue where an unused release.txt file was not removed.

    ]]>
  • This product enhances to show user friendly message when trying to install an already installed RDMA provider.
  • This product enhances to update VF RoCE resource assignment in the PF.
    • ]]>
  • Firmware maintenance release on HPK4.
  • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change. 
  • If drive FW needs to downgrade from HPK4 to HPK3, a reset/POR is required.
    • ]]>
  • Firmware maintenance release on HPK4.
  • Please note this version of FW has applied UUID change from little endian to big endian per Datacenter NVMe SSD Spec. System application should be updated accordingly per this UUID change. 
  • If drive FW needs to downgrade from HPK4 to HPK3, a reset/POR is required.
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         TBD

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         TBD

    ]]>         This product corrects an issue which Windows Server 2022 crashes when system has high number of logical processors.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in Linux operating system.

    Addressed an issue where the system might failed to update NVMe drive firmware.

    Known Issues:

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Updated to driver version 24.10.26603.0

    ]]>         Updated to driver version 24.10.26603.0

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform

    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and are not applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and are not applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Fixed an issue that drives are still listed at the OS level when the controller is offline.
    • ]]>
  • Added support for Azure Stack HCI 23H2..
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fix FW assert and other regular fixes
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product fixes warning message: index 1 is out of range.

    ]]>
  • This product now adds more trace events related to SFP module IOCTLs.
  • This product now supports Red Hat Enterprise Linux 8 update 10.
    • ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
     
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         TBD

    ]]>
  • This product enhances to enable RSS code to support systems with more than 256 CPU cores.
  • This product enhances to support Wake-on-LAN with 1G connection.
    • ]]>         TBD

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Init. version for VMware 9.0

    ]]>         Updated to version 9.4.11.20

    ]]>         Updated to version 9.4.11.20

    ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
    • ]]>
  • Updated Supported Environments
  • Updated Supported Platforms
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Updated to version 1.0.0.0-4

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Updated to version 1.0.0.0-4

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Support Azure Stack HCI 23H2.

    ]]>         Support Microsoft Windows Server 2025.

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us.
    • ]]>         TBD

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         "REMOVED". This component will no longer be available for download. Replacement component is made available, click the "obtain software" link to download the latest component. This component is removed due to broken linkages in this product.

    Upgraded to version 26.43.1014

    ]]>         "REMOVED". This component will no longer be available for download. Replacement component is made available, click the "obtain software" link to download the latest component. This component is removed due to broken linkages in this product.

    ]]>         Upgraded to version 26.43.1014

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.473.14

    14.4.473.14

    14.4.473.8

    14.4.469.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.473.14 14.4.473.14 14.4.473.8 14.4.469.0
    ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and arenot applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>
  • DMTF PLDM Redfish Device Enablement enhancements: Add support for Redfish Encryption (POST & PATCH)

    • o POST Storage.SetEncryptionKey

    o PATCH Storage[EncryptionMode]

    o PATCH/POST Volume[Encrypted]

    • Note: MR controller support SED only. Therefore, Volume[EncryptionTypes] is not writeable during POST (Create) or PATCH (Update). Correspondingly the following Annotations are not populated:

    a. EncryptionTypes@Redfish.AllowableValues (Volume Schema)

    b. @Redfish.WriteableProperties[EncryptionTypes] (Volume Schema)

    c. EncryptionTypes@Redfish.OptionalOnCreate (Volume Capabilities)

    d. EncryptionTypes@Redfish.AllowableValues (Volume Capabilities)

    e. EncryptionTypes@Redfish.UpdatableAfterCreate (Volume Capabilities)

    o POST Volume.ForceEnable

    o POST Drive.RevertToOriginalFactoryState

    o Note:

    • PATCH Volume[Encrypted] can be issued only with option ‘true’ on eligible volumes. PATCH Volume[Encrypted] with option ‘false’ will befailed because a secure volume cannot be changed to an unsecurevolume in MR firmware.
    • During POST (Create) ‘Encrypted’ option is not allowed for creating a volume with RAIDType=None. This is because MR does not support creating a secure JBOD in one step. After creating the JBOD, PATCH Volume [Encrypted = true] can be issued to create a secure JBOD.
    • Whenever user requests to change to EKM, a reboot is a must to obtain the key via UEFI driver.
    • Add MR408i-p support
    • Added support for UBM10 backplanes
    • Support UBM backplane FW version display and FW update when UBM controller is in bootloader state if there is an interruption during FW update
    • Support NVMe SSD for Unmap capable Logical Drive. Please note that SATA SSD is not supported for Unmap capable Logical Drive.
    • NAND flash refresh improvements

    o The algorithm that posts the event "System reset required" after a specified  number of days has been removed. The refresh happens after the same specified time and the new events are populated as below:

    • Before starting the Nand flash refresh: “NAND refresh in progress:changing WB Logical Drives to WT”
    • After the completion of Nand flash refresh: “NAND refresh complete:changing WT virtual disks to WB”
    • The above behaviors are applicable only to MR400 controllers and arenot applicable to MR200 controllers
    • RAID1 Consistency Check Event String Change

    o The Event String has been changed from "Consistency Check found inconsistent parity on LD <Ld Id> at strip <Strip Number>" to "Consistency Check found inconsistency on LD <Ld Id> at strip <Strip Number>".

    • Support a new controller property, "Spin Down Drives At Shutdown", to control spindown of configured drives during shutdown
    • Support for SCSI NVMe Translation Layer Specification version 1.14
    ]]>
  • Fix a00143232en_us: HPE MR Gen11 Controllers - The Component Integrity Status Is Shown As Not Supported in HPE ProLiant DL365/DL385 Gen11 Servers With AMD EPYC 9xx5 2P Configurations
  • Fix a00144054en_us: HPE MR Gen10 Plus and Gen11 Storage Controllers - Updating the SAS/SATA/NVMe Drive Firmware May Not Succeed When the System Boots to the VMware ESXi Operating System
  • Fix a00142857en_us: HPE MegaRAID Storage Administrator (MRSA) - Unexpected Information Displays in the HPE MRSA When Heavy I/Os Are Active
  • Fix an issue that CM7 FIPS drives are not identified as SED capable drives. CM7 FIPSdrive Model Number: VO001920YXUHU,VO003840YXUHV,VO007680YXUJA,MO001600YXUJB, MO003200YXUJC, MO006400YXUJD, VV007680LYJKF,VV015360LYXMT, MV003200LYJKH, MV006400LYJKK.
  • Fix an issue that foreign drives import with invalid security key with 5 attempts causing controller into infinite loop
  • Fix an issue that controller may assert when there is MCTP traffic when PCI BAR update is in progress
  • Fix an issue that Redfish Drive.CapableSpeedGbs shows as 22 instead of 22.5 for SAS4 drive
  • Fix an issue that the number of logical drives created is less than the expected when creating multiple Logical Drive in the same command with ReuseTargetId option
  • Fix an intermittent issue that pinned cache may not generate in multiple logical drive Config
  • Fix a rare issue that offline drive firmware download timed out due to host taskmanagement but still generate download complete event
  • Fix an issue that RAID5/50/6/60 logical drive performance may be lower when there is cache offload happened before server bootup
  • Fix an issue that controller may fault and recovery with OCR (online controller reset) while running Patrol Read on NVMe drives
  • Fix an issue that Maximum Write Same Length or Maximum Unmap Block Descriptor Count of NVMe JBOD drive may be overwritten and cause SCSI UNMAP or WRITE SAME command failed
  • Fix a rare issue that UR (Unsupported Request) for PCIe Memory Read may occur when host configure PCIe BAR at run-time
  • Fix an issue that SCSI UNMAP command using a parameter list length greater than 0 and less than 8 would fail with SCSI Sense key Illegal Request and Additional sense data of Invalid Field in Parameter List
  • Fix a rare issue that controller may assert because PCI bar initialization timeouts waiting for boot message processing
    • ]]>         TBD

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Fix 1) PCIe link length drop in AMD x2 system configuration
        2) Drive detection after hot re-insert on Windows
        3) Other regular FW patch release.

    ]]>         None

    ]]>         Built with new RPM signing key.

    ]]>         none

    ]]>         Enabling rpm installation when OS is in FIPS mode

     

    ]]>         For 2025 Jan SPP.

    ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>

  • This component provides support only for VMD enabled Intel VROC platform.

    • ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Improve random read/write perfomance.
    • ]]>         The following new features and changes have been included in version 24.10-1.1.4.1:

    • Enhanced firmware reset flow for Sync1 utilizing community-accepted hot reset kernel flow.
    ]]>         The following issues have been fixed in version 24.10-1.1.4.1:

    • rte_eth_dev_start() performed unnecessary recreation of mlx5 control flow rules, resulting in increased delay of rte_eth_dev_start().
    • Firefly was not compliant with "SyncE to 1pps Class B/C Transient response" while using ConnectX7 FHHL adapter card.
    ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.3502:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

     

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
       

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
       

    No fixes are included in firmware version 16.35.3502.

    ]]>         Add new support platform.

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Sever 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us with the estimated effective date 2024/8/9
    • ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>
  • FW assert fix and other regular maintenance release.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix to Assert fixes, current firmware improvements and bug fixes.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>         TBD

    ]]>
  • This product enhances to show user friendly message when trying to install an already installed RDMA provider.
  • This product enhances to update VF RoCE resource assignment in the PF.
    • ]]>         Important Notes:

    Ver. 1.0.0.22(D) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.01.05.105 should be paired with System ROM 3.40 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>         This product fixes where MBA configuration reset to defaults after updating firmware.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         Updated to version14.4.466.0

    ]]>         Updated to version14.4.466.0

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(E) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added code signing project ‘SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>         Important Notes:

    Ver. 0.2.3.0(E) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(C) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE and new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>
  • Added support for UBM10 backplanes
  • Do not populate Box field for non-hotplug backplane configuration
  • Add a switch support spin down drives during shutdown
  • Digitally sign for the Windows MRSA .exe and .dll files
  • Added HPE ProLiant Compute DL380a Gen12 Server support
    • ]]>
  • Added support for UBM10 backplanes
  • Do not populate Box field for non-hotplug backplane configuration
  • Add a switch support spin down drives during shutdown
  • Digitally sign for the Windows MRSA .exe and .dll files
    • ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>         The following new features and changes have been included in version 24.10-0.7.0.1:

    • [Beta] Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Added kernel support for monitoring RDMA events from userspace. Using the netlink or the RDMA tool, users will be able to monitor the InfiniBand device events and changes such as device register, device unregister and netdev attachment/detachment.
    • Added the “irqs” directory inside the SF sysfs directory to provide the users information about the mapping of SFs and their IRQs.
    • Added support for setting a maximum number of completion EQs for SFs.
    • Added support for up to 23 bits for uar_page_index in create_cq flow. This allows the user to perform create_cq with a uar_page_index larger than 2^16 as supported by the hardware/firmware.
    • [Beta] Added support for specifying bandwidth proportions between traffic classes (TC) in the devlink-rate API. This new option allows users to allocate bandwidth across multiple traffic classes in a single command. This feature provides a more granular control over traffic management, especially for scenarios requiring Enhanced Transmission Selection. Users can now define a specific bandwidth share for each traffic class, such as allocating 20% for TC0 (TCP/UDP) and 80% for TC5 (RoCE).
    ]]>         The following issues have been fixed in version 24.10-0.7.0.1:

    • The udev rule included an invalid line in its syntax that triggered the error message: "/usr/lib/udev/rules.d/90-ib.rules:4 Only network interfaces can be renamed".
    • "rdma-core" build failure due to the following symbol issues in rdma-core: 1) mad_register_port_client() symbol did not need to be exported 2) The XDR speed decoding functions were not properly exported.
    • When trying to configure the initiator/responder depth to 12, the driver actually configured the depth to 8 (power of 2 rounded down), and the user received an RDMA NAK when RDMA read requests were posted.
    ]]>         The following new features and changes have been included in version 24.07-0.6.1.1:

    • Changed the SF initiation/boot flow to avoid EQ creations. Now EQ will be created only when required by the user/system QPs.
    • [Beta] fwctl is a new subsystem intended to bring some common rules and order to the growing pattern of exposing a secure firmware interface directly to the userspace. fwctl focuses on debugging, configuration and provisioning of the device. As fwctl is not installed by default, you can install it by adding "--fwctl" to the installation command.
    • Exposes the req_transport_retries_exceeded counter (per QP counter). It can be seen using the RDMA statistics, and shows the number of times the requester detected transport retries exceed error.
    • Creates a single netdev abstraction for multiple Socket-Direct PFs of the same port that run on multiple NUMA nodes. This single netdev handles traffic locally on each of the NUMA nodes without upper layer complexities. This improves the applications' locality and performance in a multi-NUMA system.
    • Added devlink-nested option to show relationships between devlink instances through devlink dev show/devlink port show commands. The devlink port show is used to check when SFs are activated, and shows the relationship between SF auxiliary device devlink instance and the eSwitch representor devlink port. Devlink Scalable Function (SF) activate command is received before enabling a partial parallelization of the SFs activation, and reduces time.
    • Extended the number of rules to be offloaded to all ports from 8 to 32. This allows greater flexibility when offloading temporary rules like VLAN traffic and ease the offload sharing between the ports.
    ]]>         The following issues have been fixed in version 24.07-0.6.1.1:

    • The InfiniBand Subnet Manager (version 5.19) became unresponsive if multicast join request was received during the Heavy Sweep.
    • Executing cma_roce_mode -d [device] would inadvertently delete contents of /sys/kernel/config/rdma_cm. This occurred due to the removal of the rdma_cm/ device directory upon script exit, affecting system configuration.
    • Corruption of SMP MAD requests list occurred when the sent list was accessed while the unregistered flow was running.
    • Data corruption occurred when GRE offload was turned on. The packet inspection parsing was fixed to avoid this by parsing the outer header as UDP and not as TCP.
    • "netdev" queue value was not updated in mqprio param when switchdev mode was enabled and the netdev queue number was reset to 1.
    • Performing CT entry update resulted in failure as it exceeded the firmware limit.
    • Stack overrun warning issue (This was fixed by reducing the size of the local on-stack array used for optimization by 192 bytes).
    • An overflow issue where RDMA applications could not find the device when creating new RDMA devices.
    • Some MRs missed the ATS enablement. Lack of ATS enablement on DMABUF MRs resulted in slower performance when using these MRs.
    • An issue related to the driver's internal MR cache cleanup process that resulted in high memory consumption on the host.
    ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated installation time
    • ]]>         Updated to version 1.0.0.1

    ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following issues have been fixed in version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Updated to version 14.4.473.7

    ]]>         Updated to version 14.4.473.7

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following issues have been fixed in component sub-version 1.0.6(C):

    • Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.

    The following changes have been made in component sub-version 1.0.6(B):

    • Product rebuilt to support FIPS mode enabled OS environment.

    The following changes have been made in component sub-version 1.0.6(A):

    • Product rebuilt to have the new SHA 384 signature.

    The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>         Support SHA384

    ]]>         Support SHA384

    ]]>         Driver version 5.4.82.1

     

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5.

    ]]>
  • Handle IOMMU restore at exit boot services
  • Support RHEL 9.4
  • Support Ubuntu 24.04 LTS
  • Add support for MR408i-p Gen11 controller
  • Added HPE ProLiant Compute DL380a Gen12 Server
    • ]]>
  • Handle IOMMU restore at exit boot services
  • Support RHEL 9.4
  • Support Ubuntu 24.04 LTS
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Introduced support for iLO 6.

    ]]>         Introduced support for iLO 6.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Updated Driver version 10.02.13.03-k1

    ]]>         Updated Driver version 10.02.13.03-k1

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         1.Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    2. Adding other logging and FW enhancements.

    ]]>         Optimize thermal maximum continuous operation temperature values.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.04.04.702 (2.30_01_06_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 04.04.04.702 (2.30_01_06_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         Updated to version14.4.466.0

    ]]>         Updated to version14.4.466.0

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This product added support to new Gen11 and Gen12 servers.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>
  • Added Azure Stack HCI 23H2 support
    • ]]>
  • Fix for [CSFE-55071]
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with Windows firmware component 5.3.6.0.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
  • This product fixes the issue where the RDE bejString special character escape sequences were incorrectly encoded.
    • ]]>
  • This product removes the Ethernet/LLDPTransmit/ManagementVlanId property to streamline configuration.
  • This product enhances the coredump feature in the BNXT driver for improved diagnostics.
  • This product enhances to update the driver to suppress the HII MBA menu for a cleaner interface.
    • ]]>
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where RDMA connections are not getting connected.
  • This product fixes the issue where RoCE and TX/RX path core dump decoding failed.
  • This product fixes the issue where Port 1 was not receiving broadcast packets with ESXi.
  • This product fixes the issue where the OCP module experiences link width degradation in the system.
  • This product fixes the issue where PXE boot does not work with VLAN configurations.
    • ]]>         This product now supports Azure Stack HCI OS.

    ]]>         This product enhanced the compatibility with firmware of Columbiaville 4.5.

    ]]>
  • This product correct an issue which seeing warning message Event ID : 101 with ICEA module.
  • This product correct an issue which E810 physical adapter does not display RDMA counters.
    • ]]>         Updated to version 1.0.0.1

    ]]>         TBD

    ]]>         This product updated the copyright information and compatibility with firmware

    ]]>         This product fix an issue that TCP traffic on VMs might be interrupted if PF undergoes a reset.

    ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         TBD

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

     

    Fixed the following:

    Apps AutoPilot installer Windows (from 14.2.555.0 to 14.2.589.31),
    APInstall fails on Win 2019 Server Core. unable to find library oledlg.dll

    ]]>         Fixed the following:

    Apps AutoPilot installer Windows (from 14.2.555.0 to 14.2.589.31),
    APInstall fails on Win 2019 Server Core. unable to find library oledlg.dll

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Improve the tolerance of error handling.
  • Enhancement of DMA engine attributes to prevent PSOD.
    • ]]>
  • Improve the tolerance of error handling.
  • Enhancement of DMA engine attributes to prevent PSOD.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.43.1014:

    • Added a recovery step in case of CQ doorbell getting lost during VF migration.
    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.). The feature is configured using a new general object: RDMA-Telemetry object, and depends on the following new caps:

    HCA_CAP.rdma_telemetry_notification_types and HCA_CAP.rdma_telemetry .

    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    • Added 'table_type_valid' and 'table_type' fields to the steering action (STC) "Jump To Flow" table parameters to enable the user to jump from NIC_TX to FDB_TX and bypass the ACL table.
    • Enabled hop reduction by bypassing NIC domain in various use cases. Such action reduces the number of hops (improves PPS) to deal with mass number of flows and devices. To enable this new capability, a new STC action type "JUMP_TO_FDB_RX" was added to allow jumping into the RX side of a table.
    • Added support for QoS scheduling across multiple E-Switches grouped in a LAG. VPort members of a Physical Function can be added to a rate group from another Physical Function and rate limits of the group will apply to those VPort members as well.
    • Increased the maximum number of supported "ARC-IN" from 1 to 8 and "ARCOUT" from 3 to 8 for the dynamic flex parser.
    ]]>         The following issues have been fixed in version 22.43.1014:

    • Setup crash would occur when create_sq used invalid mbox. Now the invalid mbox is replaced with a valid DB.
    • An upgrade issue that required firmware v22.36.1010 as an intermediate version when upgrading the firmware from v22.33.0428 or below to versions above 22.36.1010.
    • Fixed the query for FACTORY default NV configuration values. The firmware always returned the "next" value to be applied.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    • MSI-X on SF can be received now through the PF's MSI-X vector.
    ]]>         The following issues have been fixed in version 22.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • SFF module could not access the EEPROM data when removing the CMIS module and inserting the SFF module instead of it.
    ]]>         TBD

    ]]>         This product enhances to support new OS version.

    ]]>         TBD

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         TBD

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.P for AMD 1st Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    Known Issues:

    None]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
  • This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Added pop-up message for all IP boot path to warn users the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.05.005.

     

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

     

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would use UUID for IPV6 DHCP when "RBSU\Network Options\Network Boot Options\IPv6 DHCP Unique Identifier\DUID-LLT" is selected.

    Known Issues:

    None

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  •  Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product updated the copyright information and compatibility with firmware

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2025.1 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.700 (2.30_01_07_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.09

    9.15.05

    7.28

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.08

    09.15.05

    7.39

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.08 09.15.05 7.39 0.0
    ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Firmware for the following devices has been updated to 20.43.1014:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 1.0.0.7(A):

    • Added support for Azure Stack HCI 23H2.

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>
  • Added Support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>         7.30 Beta Drop

    ]]>
  • Add  "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset
     
    • ]]>
  • Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.
    • ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Azure Stack HCI 23H2
    • ]]>
  • Fixes the displayed message of direct attached NVMe firmware flashing to align FW activation result by OS.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Added code signing project SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>         Add pop-up messages to warn user the risk of using Intelligent Provisioning when launching the utility.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    Problems Fixed:

    Addressed an issue where the system iLO remote console might hang in glyph loop error handling when the System Utilities Language is set to Japanese.

    Known Issues:

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel IPU2025.1 updates.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.01.05.105.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system would uses UUID for IPV6 DHCP even when DUID-LLT is selected.

    Known Issues:

    None

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>         Updated to driver version 14.4.393.20

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>
  • Remove ROM flash way from this FWPKG.
    • ]]>
  • Improve random read/write perfomance.
    • ]]>         TBD

    ]]>         Firmware for the following devices has been updated to 20.43.1014:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.43.1014:

    • Added the option to indicate an error CQE event on every selected function per eSwitch manager. This indication is defined as a new WQE including the relevant information about the error (such as: syndrome, function_id, timestamp, QPs num etc.).
    • Extended kernel lockdown permission set. The following sub-operations can now be called by tools (permission TOOLS_RESORCES) using new HCA capability bitmask field: tool_partial_cap.

    The 5 sub-operations are:

    • QUERY_HCA_CAP with other function
    • QUERY_VUID with direct data
    • QUERY_ROCE_ADDRESS with other vport
    • SET_HCA_CAP with other function
    • POSTPONE_CONNECTED_QP_TIMEOUT with other vport

    The new added caps are:

    • tool_partial_cap.postpone_conn_qp_timeout_other_vport,
    • tool_partial_cap.set_hca_cap_other_func
    • tool_partial_cap.query_roce_addr_other_vport
    • tool_partial_cap.query_vuid_direct_data
    • tool_partial_cap.query_hca_cap_other_func
    ]]>         The following issues have been fixed in version 20.43.1014:

    • Setup crash when "create_sq" used invalid mbox.
    • The firmware always returned the "next" value to be applied when querying FACTORY default NV configuration values.
    ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Initial version.

    ]]>         Initial version.

    ]]>
  • Added support for Azure Stack HCI 23H2.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU 2025.1 guidance. This version of the SPS 06.00.03.700 (2.30_01_07_2025) should be paired with System ROM 2.30 (01/16/2025) or later.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU 2025.1 guidance.

    Known Issues:

    None]]>
  • Updated Supported Environments
    • ]]>
  • Updated support environments
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Add new support platform.

    ]]>
  • This product enhanced the compatibility with icea driver.
  • There are limitations with these products in version 4.6. (known issue)
    If you enable the 'transmit balancing' feature in the HII menu, you may see the following Linux dmesg log: 'DDP package does not support the transmit balancing feature,' when running with incompatible Ice driver revisions, such as ice v1.15.4, which can lead to a link failure.
    • ]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.F for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.L for AMD 2nd Generation EPYC processors.

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may encounter an SMI storm when PCIe error disconnect recover(EDR) failed.

    Addressed an issue where system may fail to update NVMe drive firmware.

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Known Issues:

    None]]>
  • Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.
    • ]]>
  • Corrected wrong wording of Parity Initialization messages.
  • Fixed vulnerability CVE-2023-45853.
    • ]]>
  • Added Write Cache Status field to the info page for physical drives when "pd all show detail" is used.
    • ]]>
  • Corrected wrong wording of Parity Initialization messages.
  • Fixed vulnerability CVE-2023-45853.
    • ]]>         TBD

    ]]>         This product fixed to prevent BSOD issue.

    ]]>         TBD

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    Changes included in component version 1.0.0.16(A):

    • Added support for Azure Stack HCI 23H2 in the component metadata.

     

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         Important Notes:

    None

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might RSOD when performing firmware update via Firmware Management Protocol.

    Known Issues:

    None]]>         Added pop-up message for all Intelligent Provisioning boot paths to warn users of the risk of data loss.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.702 (2.30_01_06_2025).

    Details about reported security vulnerabilities and their mitigation can be found at the following link Security Bulletin Library | HPE Support.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the system might not be able to update SR controller FW with BIOS legacy mode.

    Addressed an issue where the system might not be able to detect hot-add SATA drive when VROC is enabled.

    Addressed an issue where the system might report intel_th_pci driver probe failed in a Linux operating system.

    Addressed an issue where the system might fail to update NVMe drive firmware.

    Known Issues:

    None]]>
  • Added support for ESXi 9.0
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
  • Adding other logging and FW enhancements.
    • ]]>
  • Add support for MR408i-p Gen11 controller
  • Add support for Windows Server 2025
  • Added HPE ProLiant Compute DL380a Gen12 Server
    • ]]>
  • Add support for MR408i-p Gen11 controller
  • Add support for Windows Server 2025
    • ]]>         Support Azure Stack HCI 23H2.

    ]]>         Support Microsoft Windows Server 2025.

    ]]>